This supplements b1945604a7, which
removed the qrc file in favor of test/test.pro coding for it.
Change-Id: I15507c89ca14fa6e6b8223de671ffff7092272d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Replace with QSignalSpy or QTRY_COMPARE when possible.
Task-number: QTBUG-63992
Change-Id: I18dc8837301424855487a12ee62451a5aeb21bf0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Put it in alphabetical order like the rest of the list.
Change-Id: I3da3bb68d1847f53419bb79490b946c935ebb518
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
They didn't exist up until now, and future patches rely on them, so
add them.
Change-Id: I8afdb9417263b45d43355c688a813bdf99ea5fc8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The test relies on the existence of qt-project.org in resources. It
contains mimetype data and is automatically added. For static builds on
MSVC it is only added if it is actually needed though.
Change-Id: Icd1d74466607196f9b635205f7cb4d9b300ec4b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If builtin_testdata is present additional data ends in inside of
resources so that tests can access this data when needed. The addiitonal
data has to be taken into account in the resource engine's test.
Change-Id: I10de6b9612ca49b314d77cfadd5b2360a5d90d53
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: I399cc1aed3ee4151cf6adfd8f8780d8975604d52
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
The formatting of the output from QSslCertificate::toText has
changed slightly from before, so it no longer matches the test's
data.
From what I can tell we just do a manual sanity check and create
a new file with the new output and then augment the test.
Task-number: QTBUG-67463
Change-Id: I751e5a3f9a28015f97c895cea47384704fd68e38
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The added test case is the binary JSON equivalent of
{"a":{"š":null}}
with two modifications. First, the length of the string "š" has been corrupted
to 0xFFFFFF00. Second and more import, the Base::size field of the inner object
has been reset to 0.
On its own the first modification would normally trigger a validation error.
However, due to the second modification the Value::usedStorage for the inner
object evaluates to 0, completely disabling all further validation of the
object's contents.
Attempting to convert this binary JSON into standard JSON will lead to the JSON
writer trying to construct a QString of length 0xFFFFFF00.
Fixed by validating also objects with usedStorage == 0.
Task-number: QTBUG-61969
Change-Id: I5e59383674dec9be89361759572c0d91d4e16e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The added test case is a binary JSON file describing an array which contains
itself. This file passes validation even though attempting to convert it to
plain JSON leads to an infinite loop. Fixed by rejecting it in validation.
Task-number: QTBUG-61969
Change-Id: Ib4472e9777d09840c30c384b24294e4744b02045
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This method takes a pointer+size pair, but begins reading through the pointer
without first checking the size parameter. Fixed by checking the size parameter.
A new test case is added with an empty binary json file. Although the test does
not fail under normal conditions, the problem can be detected using valgrind or
AddressSanitizer.
Task-number: QTBUG-61969
Change-Id: Ie91cc9a56dbc3c676472c614d4e633d7721b8481
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the application closes, we should clear the cache to not run into
memory sanitizers claiming that we leak.
Change-Id: Ibf9fcda107be6b7f3ed414d7651080aa1f61a3a5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
This allow to customize easily placeholders in QLineEdit by example.
Change-Id: I2bb379164376e1d88b42d6c86c2e5b8df99fbc56
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When showing a condensed font with AnyStretch, we should
not apply any stretch to the font (and if a stretch is
requested, we should calculate the actual stretch based
on how much the font is already stretched or condensed).
This usually works as expected, however, when using
QFont::NoFontMerging as the style strategy, we would
scale the glyph advances by the stretch of the font
since the calculated stretch of the font engine would
be overwritten by the actual stretch. In the case where
we use font merging, this would be done for the multi
engine, so we would not get the same issue, since the
text engine gets the stretch from the actual font engine
and this still has the original, calculated stretch
set.
Note on the test: We can't use testString() for this,
since it contains a space, and the test font does not
have a glyph for this, so we will end up merging a
different font for the space, giving us a slightly
different advance.
[ChangeLog][QtGui][macOS] Fixed display of condensed fonts
when NoFontMerging is in use.
Task-number: QTBUG-63800
Change-Id: I5b05e0dbfc8ae4b5d10c621ecb0975f53fda9483
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When the page size was not valid on the new printer, it would end up
having the wrong page size name on the new printer. What should happen
in this case is that it should set the originally set page size as a
custom page size on the printer instead.
Task-number: QTBUG-62221
Change-Id: Iaca34ae262f5d0685ca60e4ca4b38229a2283289
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
The reason it crashed was this:
1. Button was pressed => _panTimer started with the graphics view as
destination.
2. Button was released => the graphicsview is destroyed
3. 300 ms later: Qt tries to deliver TimerEvent from _panTimer to the
graphics view. Unfortunately, the graphics view is deleted, but Qt
doesn't know that... (*crash*)
We therefore chose to start the timer with a destination we are controlling the
lifetime of: the QMacPanGestureRecognizer. Inside the timerEvent of that we can
check if the actual target is already destroyed.
Task-number: QTBUG-60404
Change-Id: Iff8f5b7217de42c4c5cf551ca507f0cff1c99a78
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
paintEventCount() is currently flaky on macOS. It gets extra paint events after
qWaitForWindowExposed() returns, which causes the following assertions to fail.
Add the wait that was removed in 0cb940b1d3 back
to fix those failures.
Task-number: QTBUG-68032
Change-Id: I68e0b6008de40922ec740291dfdd1842e0f62f89
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This warning was removed when we refactored QCocoaMenuItem::sync().
This change amends 8412009de6.
Task-number: QTBUG-68013
Change-Id: I0d65109dff5f82db530b6bdced96c05692af6b4b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Replace the code for isRowSelected and isColumnSelected with
a much simpler algorithm for deciding if a row/column is selected.
In a model with a cross-hatch of unselectable indexes, the return values
of is(Column/Row)Selected would depend on the order in which the
selections were done.
Task-number: QTBUG-18001
Change-Id: I6aa4b1df7c07fae469a686041927fa8c42bc9b16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Home/End don't actually work on macOS. The "select all and delete" key
was not actually testing anything at all.
Change-Id: I44d3e9dd27da418afd699bf8720d5369325d20df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
... but only if the host it came from is an EXACT match. Also only apply
the cookie if the url is an EXACT match.
[ChangeLog][QtNetwork][QNetworkCookieJar] Cookies will no longer be
rejected when the domain matches a TLD. However (to avoid problems
with TLDs), such cookies are only accepted, or sent, when the host name
matches exactly.
Task-number: QTBUG-52040
Change-Id: Ic2ebd9211c48891beb669032591234b57713c31d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
checkReason_ActiveWindow() started failing on Windows when run together with
other tests, but still passed on its own.
The offending tests was checkReason_focusWidget(), which showed a window but did
not wait for it to be active.
After adding this wait the whole test executable passes on Windows as well.
Amends fd87c8da82.
Change-Id: I384bc45176fcd7bf6f491a4f39b46464ba45693b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This way the platform window is destroyed in a timely manner, preventing
redundant close events from the window system.
Task-number: QTBUG-43344
Change-Id: Ifdfca59ceacef54405f1c227c493dc514a1b27ea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Instead of a local wrapper for it.
Change-Id: I0708dfad44b3db0c7a13e75ba5b4193ab50ac315
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Although QPainter::drawImage()/drawPixmap() would render images scaled
according to their devicePixelRatio(), that would not happen for
drawTiledPixmap() and when using a textured brush. Implemented here,
in combination with the pending "High-dpi drawTiledPixmap (raster
paint engine)" commit.
[ChangeLog][QtGui] Fix drawTiledPixmap() and texture-brush painting with high-DPR images
Task-number: QTBUG-67248
Change-Id: I037e3f897fa708038a0222d3b0c61c7842d87961
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Don't use QCursor when we can position a mouse relative to the
window coordinates via QTest::mouse*() functions. Even the way
QCursor was user here seemed to be hackish. This hack apparently
was there to make the test pass on macOS, I have verified that
the updated test continue working on this platform.
- Remove Q_OS_QNX ifdef, as this test does not depend on QCursor anymore.
- Remove QTest::qWait()-s. Unconditinal waiting should not be used.
- Add better comments.
- Other minor things.
And move tst_QComboBox to use QTEST_QPA_MOUSE_HANDLING code path.
Eventually we want to deprecate the legacy code path.
Change-Id: Ib72f324b5197d0fd66fc32b8c1c7509e58838e04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The NEON implementation uses rsqrt and thus can not be taken on 0, so
replace the minimum with something close to zero instead of zero.
Task-number: QTBUG-59961
Change-Id: Ia39e45be675b056c1e22900495ce9ba4e8b70e5f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
This was originally added so that you could replace a T with
QAtomicInteger<T> in the same class and still keep ABI. However, for
legacy reasons, on 32-bit x86, types larger than 4 bytes keep an old
1990s alignment of only 4 bytes, but modern std::atomic<T> for those 8-
byte types enforces an alignment of 8 bytes. Therefore, the requirement
to keep alignment is not possible to guarantee.
In other words: you may not replace T with QAtomicInteger<T> or
std::atomic<T> and assume no ABI breakages in all platforms.
This is a requirement to implement atomicity. An 8-byte type aligned to
only a 4-byte boundary could cross a 16-byte boundary or, worse, cross a
cacheline boundary. Crossing the 16-byte boundary could be bad on some
processors, but crossing the cacheline boundary (addresses ending in
0x3C, 0x7C, 0xCC and 0xFC, or 4 out of 64 possible addresses or 6.25%)
is always bad: the CPUs cannot guarantee an atomic load or store
operation.
See also <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71660>.
Task-number: QTBUG-67858
Change-Id: If90a92b041d3442fa0a4fffd15283e4615474582
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
RCC generates code that registers resources automatically on program
startup via global constructors. When linking statically and nothing
references the symbols in the .o file compiled from the RCC generated
code, then the linker will discard the embedded resources and they will
not get initialized. That is why for static linking it is necessary to
explicitly initialize resources using the Q_INIT_RESOURCE macro.
We can avoid the need for the explicit initialization in the context of
plugins that are statically linked into the application. resources.prf
can generate a .cpp file with a helper function that contains all the
Q_INIT_RESOURCE calls for all resources in the plugin. That helper
function in turn is injected into the plugin entry point, which in turn
is guaranteed to be included in the final binary.
Change-Id: If1abf9c85ef92935020af073b989c58c1ae6ca63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Added a few functions to derive keys from passwords. Currently it
supports PBKDF1 and PBKDF2 as defined in
RFC 8018 ( https://tools.ietf.org/html/rfc8018 ).
[ChangeLog][QtNetwork][QPasswordDigestor] Added QPasswordDigestor
Task-number: QTBUG-30550
Change-Id: I2166b518bd8b54e3486514166e76fd9ba2f219c8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch adds the ability to decode keys which are encoded with PKCS#8
using the generic back-end (used in winrt and secure transport).
It works on both WinRT and macOS; however QSslKey seems unused in the
WinRT backend and it seems only RSA keys can be used for certificates
on macOS. Meaning that DSA and Ec, which in theory* should represent
their unencrypted versions, can't currently be tested properly.
* Can also be confirmed by loading the key using the ST or WinRT
backend, calling toPem(), writing the output to a file and then loading
the unencrypted key using openssl.
[ChangeLog][QtNetwork][QSslKey] Added support for PKCS#8-encoded keys
in the generic SSL back-end (used for SecureTransport on macOS and for
WinRT). Note that it does not support keys encrypted with a PKCS#12
algorithm.
Task-number: QTBUG-59068
Change-Id: Ib27338edc7dbcb5c5e4b02addfdb4b62ac93a4c3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
That check is flaky on Windows. It doesn't seem to be testing Qt functionality.
I also don't see CreateFile2() documentation mentioning any guarantees that
opening the same file twice would give the same HANDLE each time.
Change-Id: Ica2e60571ae9fc39bf822803a2a9dd6add8323d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The manually maintained qrc file was missing corrupt_clut.bmp among
others.
Change-Id: I8916ba76a63950de03f25814d893306d046d273d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a key press is received which is not spontaneous then it needs to
be manually sent as a shortcut override event to ensure that any
matching shortcut is triggered first. This enables emulation/playback
of recorded events to still have the same effect.
[ChangeLog][QtWidgets] Sending a key press event with sendEvent() now
sends a ShortCutOverride event first to the widget to trigger any
shortcuts set first.
Task-number: QTBUG-48325
Change-Id: Iafcc2cdb1773bffe89edaeb0abc44cd5a51088e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QNetworkRequest is already aware of the Last-Modified header but
has been lacking support for the If-Modified-Since, ETag, If-Match
and If-None-Match headers. These headers are used with HTTP to
signal conditional download requests.
See RFC 7232 for more information.
Change-Id: I248577b28e875fafd3e4c44fb31e8d712b6c14f1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sometimes it is hard to find the line, when the warning
"QObject::connect: invalid null parameter" appears in the log.
This change adds the class names of the sender and receiver
to give a hint where to search for the wrong call to connect.
Change-Id: I00cead7d943f96d60f198cb3f0bed34ba10285c5
Reviewed-by: André Hartmann <aha_1980@gmx.de>
QTestEventLoop (conveniently so) takes care of timeouts thus no
external QTimer/handling logic needed at all.
Change-Id: Id65ea928daec1e7d9380107e63916896f19d3d14
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtWidgets] QApplication no longer sends a mouse move event
to the entered widget if it sends synthetic enter and leave events.
Task-number: QTBUG-67736
Change-Id: I75daaffd53f1ddc2bc4d7df67382cbc22d3eb6fc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When generate_expected_output.py is run for an in-source build, the
raw output contains no paths to the sources for the script to whittle
down, as it does for shadow builds, to just the path from qtbase down.
So kludge together some extra regexes that can fix that up and tweak
some relevant code to provide them with the data they need.
Change-Id: I656d7126087bd9ad20b2af6835fba314d90a171d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The documentation states that if you have a range of
0.00-2.00 with the number of decimals set to 2 then
any number up to 9.99 would be considered intermediate.
This is because the number of digits still matches both before
and after the decimal point. If it is 10.0 or 9.999 then
it is still considered invalid.
In the case of 9.999 being invalid in this case, the documentation
is corrected as this was incorrectly indicated as Intermediate,
as the code indicates it as Invalid.
Change-Id: I07b433e856f355916a1240deafdf4ef58e680639
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The drive has to be defined for every Windows configuration (also
including winrt).
Change-Id: I94a3131b8aec20cda97dc78f55b1d87aa10240e4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This static method can be called before QGuiApplication is created. At
that point there is yet no primary screen, so the implementation
needs to guard against dereferencing a nullptr.
Task-number: QTBUG-67309
Change-Id: I6b7b9e97b1c3c79bf2f9c6d6247c3b10f39f7a55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
To read data from a named pipe, QWindowsPipeReader uses the ReadFileEx()
function which runs asynchronously. When reading is completed and the
thread is in an alertable wait state, the notified() callback is called
by the system, reporting a completion status of that operation. Then the
callback queues a readyRead signal and starts a new sequence. The latter
is skipped if the pipe is broken or the read buffer is full.
Thus, if an application does not run the event loop, the next call to
QWindowsPipeReader::waitForReadyRead() should emit the queued signal
and report true to the caller even if no new read operation was started.
Change-Id: I37102dbb1c00191d93365bfc2e94e743d9f3962a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
1. If a request was redirected or some error was encountered, we
try to reset the uploading byte-device.
2. Disconnecting from the byte-device is not enough, since we have a
queued connection, _q_uploadDataReadyRead() gets called even if
byte-device was deleted and thus sender() can return null -
we have to check this condition.
3. Update auto-test with a case where our server immediately
replies with a redirect status code.
Task-number: QTBUG-67469
Task-number: QTBUG-66913
Change-Id: I9b364cf3dee1717940ddbe50cba37c3398cc9c95
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This failed (occasionally) in finding the editor widget, so wait for the window
to be shown properly. Also enter the event loop with QTRY_VERIFY and not for a
fixed time of 1 s.
This however just moved the point of failure. Now the test fails since the
clearing and setting of focus does not dismiss the editor widget sometimes, so
still blacklist it.
Task-number: QTBUG-67282
Task-number: QTBUG-66216
Change-Id: Iec598609fce23a25d7b955082d0973685d612715
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Fix a mistaken #ifdef that should have been #if; and only call
QTimeZone::availableTimeZoneIds() once in transitionEachZone_data(),
while switching to use of a ranged-for.
Change-Id: Id27aae9ef450f21350283099c892ca7173884b94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_COMPARE instead of a wait followed by QCOMPARE. Unless the condition
doesn't change and the wait provides the opportunity for things to go wrong.
Task-number: QTBUG-63992
Change-Id: I13474a45f1f4df9d77a418729a5748235ae0dd1a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
For the time being, no more stretched QComboBox. They
were already looking bad before and nobody complained,
so it's a non-issue. In the future, we might use square
combo boxes in the same way as we do for push buttons
but for non-editable QComboBox only.
Removes what is now dead code, including some leftovers.
tst_QMacStyle updated to reflect size changes to accom-
modate the focus ring.
Change-Id: I60fac86b9acb52cc96373bca0b3cad598ec4f1e7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QTextDocumentWriter only supports a small subset of table formatting
when exporting to ODF-format. This patch adds more formatting
capabilities to the ODF exporter:
- table border support
- table alignment
- table width
- respect column constraints (column widths)
- add a tab before soft line breaks. This will avoid causing the last
line to stretch all over the cell in justified paragraphs.
With this patch, line height settings are now exported, too.
[ChangeLog][QtGui][QDocumentWriter] QDocumentWriter now supports table
borders, table alignment, table width, column widths, line height and
image resolution when exporting QTextDocuments to ODF files.
Task-number: QTBUG-63581
Change-Id: I2d269ef0f842e73af64d48bfef531d5fa3078088
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When we load DER-encoded keys in the openssl-backend we always turn it
into PEM-encoded keys (essentially we prepend and append a header and
footer and use 'toBase64' on the DER data).
The problem comes from the header and footer which is simply chosen
based on which key algorithm was chosen by the user. Which would be
wrong when the key is a PKCS#8 key. This caused OpenSSL to fail when
trying to read it. Surprisingly it still loads correctly for unencrypted
keys with the wrong header, but not for encrypted keys.
This patch adds a small function which checks if a key is an encrypted
PKCS#8 key and then uses this function to figure out if a PKCS#8 header
and footer should be used (note that I only do this for encrypted PKCS#8
keys since, as previously mentioned, unencrypted keys are read correctly
by openssl).
The passphrase is now also passed to the QSslKeyPrivate::decodeDer
function so DER-encoded files can actually be decrypted.
[ChangeLog][QtNetwork][QSslKey] The openssl backend can now load
encrypted PKCS#8 DER-encoded keys.
Task-number: QTBUG-17718
Change-Id: I52eedf19bde297c9aa7fb050e835b3fc0db724e2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Properly handle single protocol TLS configurations. Previously,
due to the use of generic (non version-specific) client/server method
they worked as ranges of protocols instead. This also fixes a couple
of previously broken tests.
Task-number: QTBUG-67584
Change-Id: Ied23113a4fab6b407a34c953e3bd33eab153bb67
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reduces the timeout from 10 seconds to the default 5, but the tested events
(resize events, painting) seem like something that should happen in 5 seconds.
Change-Id: I1d12372f37264bf7be64096e43813cd03f567102
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
BuiltIn inputs shouldnt be translated into a code input. We comment the
input line for this variables
Change-Id: I3b7d2fd06afc6a122d90a999fc5a5246fc93234e
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
The cost for the pixmap cache was calculated in bytes but
setCacheLimit() takes the size in kilobytes. This lead to the
situation that all values above 2097152 overflowed and disabled
the caching completely. Fix it by calculating the cost in
kilobytes as it is done in QGLContext.
Task-number: QTBUG-45293
Change-Id: Ib8dc2360c8f3201ce0b615a04c38b5ccaa8fc6cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add functions for converting QImage to HBITMAP and back
supporting additional formats of QImage (RGB888, RGB555,
Indexed8 and Mono). Add test with roundtrip to tst_qimage similar
to tst_QPixmap::toWinHBITMAP().
Task-number: QTBUG-51124
Change-Id: Ib568898e7162686bfa527d828785628eb0b78e21
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It's useful when you need to check how long a hash will be without first
generating one.
[ChangeLog][QtCore][QCryptographicHash] Add a static method, hashLength,
which returns the length of the output of a hash function in bytes.
Change-Id: Id6a454016523de83d157fd95c50105c6db4bb1d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test was failing because the files it expected to create were not actually
visible on the disk.
This was because 189e9c93d7 made QTemporaryFile
use unnamed files if the file name is not actually requested. Fix by forcing the
temporary file to be made with the requested name.
CI has not caught this because the test executable is marked insignificant_test
on Linux.
Change-Id: Ibe0244fdfcc66acf3be4314da51b4c0b3b520b71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Except RHEL-6.6 and 7.4
It was blacklisted in f3939d943e, along
with a lot of other entries. No specifics are known about why it was
blacklisted originally, but now it only fails on RHEL because they
use OpenSSL 1.0.1.
Change-Id: I6d1d1b7b7bf5386b2115b8780163550cf03bbad7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On Wayland, manipulating the clipboard requires an input event serial, which is
not possible to get unless the compositor sends us input events.
Change-Id: If5231a5db85f8d6ad988ea93f240cee0c3466f9f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This makes the tests pass on Wayland compositors that don't automatically give
focus to newly created windows. Such as a headless Weston, which is very useful
for testing.
Task-number: QTBUG-66846
Change-Id: I502504b333499c89be193a3ebc19d41264a13580
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Instead of an unconditional wait.
The QSKIP is necessary because the PDF format is non-native and the Windows
implementation of QPrintDialog doesn't work then.
The macOS implementation has the same warning, so add the check for that OS
as well.
The test has previously passed, since it hasn't seen not actually opening the
dialog as an issue.
Change-Id: Ib53e378b232580358f13e0c5206404412f9e6ee2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is a long overdue change so we don't break ADL of operator|.
I think will not break source or binary compatibility.
The problem is code like this:
namespace Foo {
struct MyStruct;
MyStruct operator|(MyStruct, MyStruct);
void someFunction() {
fooLabel->setAlignement(Qt::AlignLeft | Qt::AlignTop)
}
}
This would be an error before as ADL would find only the Foo::operator| and not
the global one since the arguments are not in the global namespace.
After this change, ADL works fine and this code compiles
This bites people with misterious error, see questions on
https://stackoverflow.com/questions/10755058/qflags-enum-type-conversion-fails-all-of-a-suddenhttps://stackoverflow.com/questions/39919142/broken-bitwise-or-operator-in-a-qt-project
[ChangeLog][QtCore] QFlags's operator| for enum types in the Qt namespace are
now declared in the Qt namespace itself.
Change-Id: I021bce11ec1521b4d8795a2cf3084a0be1960804
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The TZ database has recently revised its ccount of when they skipped a
day to cross the international date line, from skipping Jan 1st 1995
to skipping December 31st 1994. So Move the before-days check to
December 30th; and correct the Feb 2nd that was meant to be Jan 2nd
(and does need to remain so, for compatibility with systems with out
of date data).
Task-number: QTBUG-67497
Change-Id: I5b9483c553205817f995f91793662a5a85e03192
Reviewed-by: Liang Qi <liang.qi@qt.io>
OCIBindByPos2 is only needed when using execBatch(), binding data that
is longer than USHRT_MAX works for exec() so this is left unchanged.
Change-Id: Ifdcf91939d184f225d24c13052ea0b81611ecf91
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no need to qWait() before a QTRY_VERIFY. qWait() will also
intermittently handle events while waiting, so calling it in a loop isn't
necessary.
Change-Id: Ica7fbf18c03e673213dd9b72f31f71937cdcb145
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_ASSERT(mimePrivate.fromCache) at qmimedatabase.cpp:218
which I added in commit 7a5644d648, was being triggered when calling comment()
for invalid mimetypes such as db.mimeTypeForName("").
Change-Id: I8037041a4b435d2a5ba24ec94b7858e38b2f0bf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the db isn't valid, then that's the actual issue, not the fact that we're
getting the same invalid db (with the same driver QSqlNullDriver) in
multiple threads.
Change-Id: I95490818ed78e741c3823e115f139c2cff01b0b1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Also use data-driven test to reduce duplication.
Change-Id: I9516e52267cb3c7b239030fd73dbbf23ac8f52f7
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes an irreversible global change: tests that do it will mess
with other tests. So make sure they're all last. This required
splitting up one test; and revealed another that secretly depended on
being run with C as default locale.
Task-number: QTBUG-67276
Change-Id: Ic24ef48b2c9bd5c37c1f11260b437628019624ca
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
The test creates client and server sockets with mismatching protocol versions,
trying different combinations, for example: 1) server (TLS 1.0) vs
client (TLS 1.2) or 2) server (TLS 1.2) vs client (TLS 1.1), etc.
Since TLS v < 1.2 does not support signature algorithms, they are ignored
and handshake is always successful. But our new OpenSSL 1.1 backend uses
generic TLS_client_method and TLS_server_method when creating SSL_CTX.
This means, both server and client will support TLS v. 1.2, they
will have no shared signature algorithms, thus handshake will fail
with an error string similar to this:
"tls1_set_server_sigalgs:no shared signature algorithms".
For OpenSSL 1.1 this test makes no sense.
Task-number: QTBUG-67456
Change-Id: Ibb2a12eea5e5c0ebaeee7d0719cc721ecf4763e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Do not let a global qtlogging.ini interfere with an autotest.
This works around an issue on Ubuntu 17.10
Task-number: QTBUG-67385
Change-Id: I0d02835eb7a561b43fe0b98f4383c170c6d51303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
As setting cursor position is not allowed on Wayland.
Task-number: QTBUG-66824
Change-Id: I1f065b7072dff13b1ee8a4fc3ccec347e8d71ed1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Uses the scripts and tests we already have for lancelot as a painting
benchmark.
Change-Id: Idf8a55e2261162e619f6dbb567dc19f8dc96da4e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead use QSignalSpy to wait directly for the expected events.
Change-Id: I319302ea7177fe690b5d885347c505454904518e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
It is suspected that the fault actually lies in CI infra.
Amends e3cf2a1ae9.
Task-number: QTBUG-66311
Change-Id: I967da283f0b94be1d0b99481d0cbd15ca7f98d45
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These two places were sort of manually implementing QTRY_VERIFY except that they
never time out.
Change-Id: I136e6c7400194327c0475c6acfc019825ccec1b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Use QSignalSpy::wait or QTRY_VERIFY instead. This shaved off ~200 ms of the
running time of the test and is more reliable.
Some unconditional qWait()s still remain in this test. They are giving an
opportunity for the wrong thing to happen and thus are not waiting for any
specific condition to be fulfilled.
Task-number: QTBUG-63992
Change-Id: I25a4470fe8d6a5b8b5039b3ed77321d24faa1707
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This method will make QRegularExpression on par with QRegExp and
will allow to replace this class when a wildcard expression can be
set through an API (e.g. QSortFilterProxyModel::setFilterWildcard).
For other use cases, see QTBUG-34052.
[ChangeLog][QRegularExpression] Implemented support for wildcard
patterns.
Warning: QRegularExpression might not give the exact same result
as QRegExp as its implementation follows strictly the glob patterns
definition for the wildcard expressions.
Change-Id: I5ed4617ca679159430c3d46da3449f6b3100e366
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Use QTRY_VERIFY instead of hard-coded wait for the tooltip to appear.
Also use QTRY_VERIFY to verify that no top level widgets are left over
to account for tooltips and effect windows.
Change-Id: Ia9835fdc480c6abb034f6fc4ad3d6b32751ee536
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
sync-up with qt-creator; no effect on qmake.
comment on cherry-pick: this is actually a lot more than a cherry-pick,
because the dual VFS needs to deal with the file ids which were
concurrently introduced on the qmake side.
Change-Id: I2c1eb16c97526fa275a1c6a2eae9266d385859ac
(cherry picked from qtcreator/424639ecac9d2e404d2bfaff7f46b45ed98664b8)
(cherry picked from qtcreator/a8010b0fff47d903d4a1f80e3adb1a2ef41beb33)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
when the QFile object is already constructed, querying whether the file
exists is actually cheap, so do it right away instead of later on
demand. that makes the calling code a bit cleaner.
fwiw, that we need to explicitly query the file's existence at all is a
result of QFile's completely useless error "codes" (which merely say
which function failed, as if the caller would not know).
Change-Id: Ifec39d05b1713d8128046f679287e510f10e45dc
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/5ba32e3484ead2e35cc7732dcd59a97e7459dbfd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Has been flaky on those platforms in CI.
Task-number: QTBUG-67254
Task-number: QTBUG-66216
Change-Id: Ia1a718a23b1992fcc0e85bf49b714bc43acc4ce2
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Otherwise the ::debug() test fails when a build does not print qDebug()
messages.
Change-Id: I3f3c4b3c7d74004abe5ed8d7ac52164d4f88ef1f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is what the other reporters also do, in various forms.
Task-number: QTBUG-67351
Change-Id: I16f2c4e0991176145ee0fbcbbfeeda071603a3c2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Also expands the tst_qsqlquery::batchExec() test to account for this
case and generally test the functionality. In addition it is made to be
more robust to avoid any discrepencies with the testing data. The test
in general is also cleaned up to enable more of it being tested with
the different database drivers where possible.
An expected fail is added for MySQL due to the fact that it has a bug
where null timestamp entries are being converted to the current
datetime when adding it as a bind value.
Change-Id: I0061bd1c69ae35b4858afc49420f13ce59cf48ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Many subclasses of QIODevice have a functionality to block execution
until some asynchronous I/O operation completes. In case we are using
QWinEventNotifier, a typical reimplemented waitFor{ReadyRead
|BytesWritten}() function could look like:
if (WaitForSingleObject(notifier.handle(),...) == WAIT_OBJECT_0) {
notifier.setEnabled(false);
ResetEvent(notifier.handle());
bool res = GetOverlappedResult(...);
...
return true;
}
Despite the fact that the operation ends synchronously, it leaves the
notifier in a state that indicates it has received the event, so its
next call to setEnabled(true) will produce a fake notification.
So, we should reset a notifier's history before enabling it again.
Change-Id: I62a9dd809ce6a7a40e9d8038f2a49299b36f8142
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Clipping enabled state would not always be correctly restored for the
raster engine (other engines work fine). The raster engine's QClipData
object is sometimes shared between painter state objects on the
save/restore stack. QClipData has its own enabled flag, and this could
then come out of sync. Fix by making sure we sync the enabled state on
restore.
Task-number: QTBUG-58789
Change-Id: I81e6254ebb93df6e153bbef58e32a885273e3224
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Previously, we would divide by zero in BezierEase::findTForX if factorT3
was zero when solving the cubic equation.
This change fixes the problem by adding solutions for the special cases
where the cubic equation can be reduced to a quadratic or linear
equation.
This change also adds tests that cover cases where the equation becomes
quadratic, linear or invalid.
Task-number: QTBUG-67061
Change-Id: I2b59f7e0392eb807663c3c8927509fd8b226ebc7
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
There are a couple of Qt classes where you almost always use the
same signal, for example QTimer::timeout, QPushButton::clicked,
and QAction::triggered.
Simply doing timer.connectTo([]{}) is much more convenient, less
tedious and even fun.
Not overloading connect() as it would be confusing to see the
receiver as first argument.
And not naming it onTimeout, as that's a popular way of doing it in
other frameworks. People would assume you could use on* with any signal.
If we ever have on* it should be all or nothing.
[ChangeLog][QtCore] Added QTimer::connectTo(), a shorthand way of
connecting to the timeout() signal.
Change-Id: Ida57e5442b13d50972ed585c3ea7be07e3d8e8d2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This removes the following functions from Qt5CoreMacros:
- qt5_use_modules(...)
Task-number: QTBUG-63519
Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70
Reviewed-by: David Faure <david.faure@kdab.com>
disableNotifiersInActivatedSlot(disable_signaled2) fails, if a signaled
state of the event #2 is detected prior to the event #1. In this case,
we get a timeout on waiting for event #1 which was disabled by the
first notification.
So, accept a disabled state of the notifier in condition for successful
exit from the loop.
Change-Id: I8a2fe76f8ec9362556d1ca1fe0be39a93ed58977
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Adds the feature of adaptive decimal step sizes for the QSpinBox and
QDoubleSpinBox. By performing a calculation in
QAbstractSpinBox::stepBy() we continuously set the step size one power
of ten below the current value.
So when the value is 1100, the step is set to 100, so stepping up once
increases it to 1200. For 1200 stepping up takes it to 1300. For
negative values stepping down from -1100 goes to -1200.
It also works for all decimal values. 0.041 is increased to 0.042 by
stepping once, and so on.
The step direction is taken into account to handle edges cases, so that
stepping down from 100 takes the value to 99 instead of 90. Thus, a
step up followed by a step down -- or vice versa -- lands on the
starting value; 99 -> 100 -> 99.
Setting this property effectively disregards singleStep, but preserves
its value so that it takes effect again when adaptive decimal step is
disabled.
Adaptive decimal step allows values to be easily set to reasonable
levels. If the spin box value is 12000, changing to 13000 often makes
more sense than to 12001. The feature is turned off be default, when
single stepping is desired.
The accelerated property allows values to be changed quickly, as well,
but it is imprecise. Holding down the button makes it hard to land on
an even thousand, like 12000 or 13000. Often you end up somewhere
nearby and would need a second adjustment to get to an even hundred or
thousand.
[ChangeLog][QtWidgets] Add option of adaptive decimal step size for
QSpinBox and QDoubleSpinBox.
Change-Id: I9f286479b821e240c8ea05c238932fc128c582bb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This test has been flaky on openSUSE in CI. The problem was that the window is
sometimes resized or removed while processing events after adding the rectangle
item to the QGraphicsScene. When the same mouse event is reused again, it uses
wrong screen coordinates. QGraphicsScene handling of mouse events then looks for
items under cursor at the wrong coordinates, does not find any items and thus
doesn't accept the mouse event.
Fix by using QTest API for simulating mouse events. Also wait for changed signal
rather than blindly running one iteration of event loop.
Task-number: QTBUG-67212
Task-number: QTBUG-66216
Change-Id: I968f9470c6f8803d01cebeda6f12ad76b4fd5293
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Thanks to QTBUG-61373, this qmake function was called with
/usr/local/5.10.1 as baseDir, which isn't absolute, leading to an
assertion failure. We could raise the error within qmake but it
proved easier to simply resolve any non-absolute baseDir using PWD,
before trying to use it as an absolute path.
Did the same for $$absolute_path(). Documented both. Adjusted the
assert that caught this to report any non-absolute path that upsets
it. Added simple tests, fixed an existing test.
Task-number: QTBUG-66156
Change-Id: Icfef2e2f5b236e071177c9beffa38d71bf404292
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We can use the QT_LIB_FOO #defines instead of our own WITH_FOO ones to
determine if a library is available. Also, it doesn't currently make
sense to refer to libraries which are not part of qtbase here. We might
add that in the future, but QtScript (being deprecated) is probably not
the first one we should add.
Change-Id: I7f2397ca5499ba6003088478161182e960e815fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
They are faster, and using them makes it paint commands be the most
CPU intensive part of lancelot instead of regular-expression matching.
Change-Id: Ifabf1081c48a83ce089660049051428fd3a43042
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When the thread that got woken up by release() is supposed to release()
to wake up another thread, we were deadlocking. This happened because we
cleared the bit indicating that there was contention when the first
release(). Instead of storing a single bit, we now store the number of
threads waiting.
Task-number: QTBUG-66875
Change-Id: I72f5230ad59948f784eafffd15193873502ecba4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
selectFile() is a no-op if the dialog is visible and
its line edit has focus, which will happen at some
point after show() is called.
In other words this is a race, and the test will pass/fail
depending on the timing of the platform implementation.
Task-number: QTBUG-66536
Change-Id: I03957edb6496d17af7a8ed1d4ca86435375e0d40
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don’t assume that there is an active modal widget
on QApplication::focusChanged(). That signal can also
be emitted on focus clear during dialog destruction.
Task-number: QTBUG-66536
Change-Id: I20c64339c56a52b39c26a7683b62779deba576d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add qWaitForWindowExposed() calls in addition to the
existing qWaitForWindowActive().
Depending on the platform, window activation events may
be synchronous, which means that a window can (and will)
become active before it becomes exposed.
This causes test failures for tests that count paint
event, and does not wait-for-exposed, when the expose/paint
event is delivered after waitForWindowActive() has returned.
We need to keep the waitForWindowActive() as well: the
test has several qWait() calls with he comment:
“Increase the probability of window activation not
causing another repaint of test items”.
These qWait() calls can possibly be removed in a future
commit.
Task-number: QTBUG-66536
Task-number: QTBUG-61967
Change-Id: Ie61bba058b583fdd1d80e600475aff3efccc32eb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test function was removed from the blacklist as
a part of the cleanup in 2056bc6b, but is still flaky
on CI.
Change-Id: I348ed167dff6fd618ede28456ada6da86ee341cd
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Resizing is broken on Wayland EGL on Intel Mesa. Move resizing into a separate
test and skip it on Wayland it until it's fixed in Mesa.
Task-number: QTBUG-66848
Change-Id: I9450a5a588b0f5d8f0bd0210aae2dc72aa48d622
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QRasterPlatformPixmap::systemOpaqueFormat returned QPlatformScreen::format
without checking that the format was actually opaque.
This caused several QPixmap tests to fail on Wayland because Wayland
compositors don't communicate the native format of the screen, just a list of
supported pixel formats, so we just return ARGB32_premultiplied in
QWaylandScreen::format().
Rename the method systemOpaqueFormat to systemNativeFormat since that's how
it's used most of the time. And do a conversion when we actually care whether
the format is opaque or not.
Task-number: QTBUG-51748
Change-Id: I47dc1c3f185fb802016ca361206d47d02e8d3cf1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Although not defined, the jpeg comment field 'content' is treated as
utf-8 nowadys. At least exiftool and exiv2 (tested via gwenview) are
expecting utf-8 here. So we should do the same.
Task-number: QTBUG-44709
Change-Id: If84dafac3e337c7993f09cd59792e721977c9adb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QTreeView is stretching the last section by default which was not
considered in this test. It worked by accident on linux because
there the default section size is 100 and the default window width
is also 100. On windows this was not the case and therefore the
test failed.
Task-number: QTBUG-51149
Change-Id: I9be1c1e942fc19817713773fe29d4afa93d73232
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This fixes the following:
- tst_QSqlDatabase::recordMySQL() to account for performance
improvements done for small integral types
- tst_QSqlQuery::nextResult() so that NUMERIC results are seen
as doubles
- tst_QSqlQuery::timeStampParsing() so that MySQL accepts the
CREATE TABLE statement
Change-Id: I68fb1d06dac12d500bb4596463f5bdd65cc9c226
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When using a virtual table inside a SQLite database it is possible that
it does not report the right number of parameters. Therefore we need
to account for this case to prevent it from crashing when trying to
bind parameters it thinks does not exist.
Task-number: QTBUG-66816
Change-Id: I3ff70bb1fe73091f43c3df53616f75858e451cfd
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When network access is disabled, every QNAM request returns a
QDisabledNetworkReply instance, which emits error and finished
immediately. However isFinished() was still false, which could confuse
application code.
Change-Id: Ifd43c86364b11a9583a38fde536e6c09c109b55f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Matches glibc commit 9a0cc8c1bd7645bf3c988890ffb59639c07a5812.
[ChangeLog][QtCore][QUrl] Fixed a bug in parsing IPv6 addresses with
more than 4 hex digits in a component.
[ChangeLog][QtNetwork][QHostAddress] Fixed a bug in parsing IPv6
addresses with more than 4 hex digits in a component.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=9a0cc8c1bd7645bf3c988890ffb59639c07a5812
Change-Id: I2701038131d91eb108aebb3bec16278e4efe3de2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit fdddb3a481.
After b85b272c26810e54a4ceb0707cf4569f87517b67, Windows 10
(msvc2017-x86) is tested on Windows 10 (msvc2017-x86_64). The
failure is gone.
Task-number: QTBUG-66798
Task-number: QTBUG-66216
Change-Id: Iba353b18b0be1346007fde674a9f768c4b9bf384
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit a0db55040d.
After b85b272c26810e54a4ceb0707cf4569f87517b67, Windows 10
(msvc2017-x86) is tested on Windows 10 (msvc2017-x86_64). The
failure is gone.
Task-number: QTBUG-66756
Change-Id: I4a8e8c62b4a021d144d570c38c4f4c10e8b1317c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Test Anything Protocol (TAP), was originally Perl's simple text-based
interface between testing modules and test harnesses, but has since been
adopted by a large number of producers and consumers in many different
languages, which allows colorizing and summarizing test results.
The format is very simple:
TAP version 13
ok 1 - test description
not ok 2 - test description
---
message: 'Failure message'
severity: fail
expected: 123
actual: 456
...
ok 3 - test description # SKIP
1..3
The specification [1] is very brief, so the implementation has been
based on how typical consumers behave, especially when it comes to
the undefined diagnostics block.
[1] http://testanything.org/tap-version-13-specification.html
Change-Id: I616e802ea380165c678510e940ddc6607d39c92d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Using QFileInfo to check if the file exists based on the filename
alone ignores the fact that all the expected files are embedded
as QRC resources.
The expectedResult() function already does a similar check, so we
can use that directly instead of checking twice if the file exists.
Task-number: QTBUG-66981
Change-Id: I0beb8d3503ed49682ae7d7e2a5172922fab5420d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 7257862fb2.
It has been reported that this patch causes widgets with certain effects
become invisible.
Task-number: QTBUG-60231
Task-number: QTBUG-66803
Task-number: QTBUG-66387
Change-Id: I9c3c4cf2f17ac639d1aee5489b665aa1e165af16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Rename getter QHeaderView::firstSectionMovable()
to QHeaderView::isFirstSectionMovable(), turn into a property
and fix \since.
Change-Id: Ica2ca43d22f3fd78ff63178ba75014807fc9b823
Reviewed-by: David Faure <david.faure@kdab.com>
Commit f55c73ede2 added various backendConfig methods;
API review for 5.11 pointed out that Config should not be abbreviated.
Change-Id: I3b294b44a030b2a6e4cdd034fa27583c228dfe42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the source model of a QSortFilterProxyModel has rows removed, a
mapping is performed in order to figure out which corresponding rows in
the sorted and filtered view of the model are affected. In doing so it
constructs a vector of removal intervals which are subsequently used to
emit rowsRemoved signals. In the case where many rows are removed (e.g.
all of them), many removal intervals are identified that are often
adjacent and could be simplified, which is what this patch does. i.e.
instead of emitting 3 rowsRemoved for 0-3, 4-6, 7-12, now a single
rowsRemoved is emitted for 0-12.
Change-Id: Ia503091cc4928378c88257cd8b431582e9ff454e
Reviewed-by: David Faure <david.faure@kdab.com>
They seem to be running just fine
Task-number: QTBUG-66849
Change-Id: Ia48d47c0fff173eb1d6eba38bdba752a91bd2b56
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QDir::isAbsolutePath(name) thinks any path starting with a slash is
absolute; however, to return a valid absolute path, we need to put a
drive prefix onto such a name. So use QFileSystemEntry::isAbsolute()
for that check (it believes in the need for a drive, or UNC prefix)
and handle the absolute-but-for-drive case when it arises.
Add a regression test and make related changes to existing tests.
Task-number: QTBUG-50839
Change-Id: Id5d2b2586bb1423fa2d9375a298a4bb5241cffe0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise random debug messages from Qt might mess up the expected vs
actual results.
The setting of QT_LOGGING_RULES in initTestcase has been removed, as
the selftest overrides that for each invocation of a subtests, via
the processEnvironment() function.
Task-number: QTQAINFRA-1631
Change-Id: I855d31274f8261f8b125df23409353f7101be0e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_GADGET macro cannot be used in templates. It can however be useful
to derive a template class from a Q_GADGET enabled base class to benefit
from type safety features in C++ (e.g. the class could represent an id
or handle for some C++ type).
For proper wrapping of a QVariant with a gadget value in a QJSValue, the
QMetaType::IsGadget flag must be set for the registered template
instance type - which does not happen prior to the fix because
IsGadgetHelper requires qt_check_for_QGADGET_macro to be defined in the
registered class but not in an ancestor class - in other words: The
class must declare Q_GADGET.
To overcome this, IsGadgetHelper/IsPointerToGadgetHelper can now
differentiate between a Q_GADGET flagged class (allowing
automatic registration) and a derived class, e.g. a template class
(forcing Q_DECLARE_METATYPE to be used explicitly).
[ChangeLog][QtCore][QMetaObject] It is now possible to use template
class instances inheriting from a Q_GADGET in Qml
Task-number: QTBUG-66744
Change-Id: I7632ad45cff79fa422b3f852ca0b963f35fab155
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Instead of keeping a static list in a qrc file.
Change-Id: I7783db5cad5929cc3f449889e1cbcbb87f7f2637
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Various tests were adapted to Q_OS_WIN to take account of the
deficiencies in its TZ APIs; which are now bypassed when ICU is
configured, as we use it instead. Replace some #if-ery on a local
define with QT_CONFIG(icu) and QMAKE_USE_PRIVATE += icu here, to match
in corelib/tools/tools.pri
Task-number: QTBUG-66367
Change-Id: Ia93abdeb7d12046310f0bb4a78c2669f8eecbbc2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
That is correct C++. GCC (and apparently Clang) accept it after the name
for compatibility with the old __attribute__ syntax.
Change-Id: Ie7f3adaaed83198ca1c61bc0efdf51634e457b07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If buddy is deleted then QLabel will still try to deliver the
shortcut event to it, in QLabel::event(), and cras.
Besides connecting to destroyed() which alone fixes the crash,
also hardened it and guarded against dereferencing null buddy,
in the unlikely event of someone adding features to QLabel.
The second part is suitable for backporting to the LTS branches.
Task-Id: QTBUG-66841
Change-Id: Ib6a36a9f99cee31afe1f88eb77f5b6cafb8b1086
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Whitelist tests that pass locally and that have been
blacklisted since the BLACKLIST was introduced in
2015 (in commit a8dda3b8).
Change-Id: I777b490313ebaa6c8c8daee168487d350179a5e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test has been flaky on top of QEMU. The test is clearly a sort of manually
rolled benchmark, not a regular autotest. Remove the test and replace it with a
benchmark in QObjectBenchmark.
Task-number: QTBUG-66823
Task-number: QTBUG-66216
Change-Id: I7a48293023f32141eed6fea50fbb63af18933a8f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When QStandardItem::insertRows/Columns is called with an empty list
or an insert count of 0, do not assert but return false.
Task-number: QTBUG-66491
Change-Id: I328598e08584fb9b0a35075458bfeb31c57ebfee
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since Qt 5.4 the QTabBar can be automatically hidden when it has less
then 2 tabs. Therefore the sizeHint should not consider the tabbars
size when the tabbar is hidden.
Task-number: QTBUG-64715
Change-Id: I2f248f88d9070de5354f7344c7628a78442ab499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Postgresql needs a special value for nan and +/- inf. This was
considered during insert but not during select.
Also remove some pre-c++11 inf/nan - handling and replace it with
Qt equivalents.
Change-Id: I044ca58e9cf673f4b100b05a0d8e25c8a9c29ec5
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The printVolumes function already adds line endings.
Change-Id: Id2553f881ccc0ab3c8b8fc77d3096dd5d968abda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the current working directory, which doesn't necessarily match
the location of the settings file.
Change-Id: Idffe2e87190cc9b6027fbba3b84e9dbf72ccf2f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code that updates a section size must also update length,
otherwise saveState can end up saving inconsistent state, and
restoreState() goes to an early-return, not doing anything.
The actual bug was fixed meanwhile because _q_sectionsChanged is called
again, which recalculates length. I still see this only as a safety
measure, every other code path that changes section sizes updates length
right away.
Change-Id: I6cc16261692d93b3640afafef600a5bdff8dca0c
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
all of these iterator classes already have a member operator+, which allows iter+int.
This commits addes non-member operator+, which allows int+iter, and forwards to the member
QList and QArrayData iterators now satisfy RandomAccessIterator concept
Change-Id: I25c1dd8cea299e735d5a5e288dbe23dc1d7a1933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before running tests that depend on QWindow::requestActivate
Gets rid of several Wayland platform checks in tst_QWindow.
Change-Id: I7a5e029044a968dfcf87ecbb5105c01d52852d35
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
And make it easier to fix if platformName == wayland-egl etc.
Change-Id: Ia2d62ba003796e08f3e8a5bbfd0c3fd9d185e4e0
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
By using qWaitForWindowExposed instead of qWaitForWindowActivated.
Task-number: QTBUG-66824
Change-Id: Idf604157070731d9c92ccf64d8349c8571960b7c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test actually passes, so there's no need to skip it.
Task-number: QTBUG-66824
Change-Id: Id091776ff7ca7637fdcf0e0ced833982b5788d92
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Has been flaky in CI.
Task-number: QTBUG-66815
Task-number: QTBUG-66216
Change-Id: I2c3eb42507eae618486aa402474b4b3f85ff310e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This follows on from a232251992 which
covered a similar instance of this. As with that change, we should not
abort the compilation, just ignore it.
Task-number: QTBUG-63772
Change-Id: Ide958080a90f43ed19edd8a320e7d45de1c96821
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When first starting an Android app we have invocation order issue, to
load the platform plugin we create the default QLocale (needed by the
resource locator code to see if :/qt/etc/qt.conf exists) so when the
android platform plugin loads and creates its own QSystemLocale, the
QLocale defaultLocalePrivate is already created and pointing to
globalLocaleData which means that systemData won't be called and thus
the code that triggers the call to QLocalePrivate::updateSystemPrivate
won't be called when calling QLocale().
I thought of two ways of fixing this, one was calling
QLocalePrivate::updateSystemPrivatea() from the QAndroidSystemLocale
constructor, but giving the responsibility to not break things to the
plugin seems a little fragile, so making the check on QLocale()
seems better.
Without this patch an Android app doing
QApplication app(argc, argv);
qDebug() << QLocale().name();
qDebug() << QLocale().name();
qDebug() << QLocale::system().name();
qDebug() << QLocale().name();
would print
""
""
"ca_ES"
"ca_ES"
now it correctly prints "ca_ES" the four times.
Task-number: QTBUG-41385
Change-Id: I2cf419f59aa008fa3aca11295fe7d42c40bcc32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Silence debug output by setting QT_LOGGING_RULES
to turn off all debug output.
Task-number: QTQAINFRA-1631
Change-Id: I5c2366b4fe4bac341dcfd92f68b6da8071c5b089
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Evaluating testlib's XML output in COIN would fail with:
"XML syntax error on line 7520: invalid UTF-8"
for the toLatin1() tests due to some Latin1/UTF8 mixup.
Add a helper function to convert the data to plain ASCII.
Task-number: QTQAINFRA-1797
Change-Id: I1c64878d4c2a67b8c2689905b5ffe6707b5963c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test has been crashing flakily recently.
1) It is creating a QGLWidget
2) It is stealing the QGLContext of that widget and moves it into a separate
thread.
3) In that secondary thread it makes the context current.
4) Meanwhile the QGLWidget itself may receive for example a resizeEvent or
other events and - since it assumes that it owns the context - attempts to
make it current.
5) Attempting to call makeCurrent() on a QGLContext that is in a different
thread than the current thread (via QObject thread affinity) will result
in a call to qFatal() and consequently the test aborts.
The conclusion from Simon Hausmann is that this test is testing a pattern from
Qt4 times that may or may not have worked back then. Nowadays with the Qt5
QOpenGL* API we do support this properly and there appears little sense testing
this.
Therefore remove the test altogether.
Task-number: QTBUG-66411
Task-number: QTBUG-66216
Change-Id: Ie2d66705bc7c3914ace6abcba9557c7c67ad4db3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This test executable was not flaky in the normal sense that when run, it
sometimes passes and sometimes fails. Instead, in some builds it would fail
consistently and in some builds it would pass consistently.
The first test to fail was version(ok00, default to last version) which gives
"mylib" as the library name and -1 as the library version. The description
implies that QLibrary selects the biggest or last used version when given -1.
However, versions less than 0 are not used at all. Instead the loading uses only
the name to select the library. Change the description to match.
So why did the test sometimes pass, sometimes fail? The test uses two library
projects lib and lib2 which install two different major versions of libmylib.
That includes the symbolic links:
libmylib.so -> libmylib.so.1.0.0*
libmylib.so.1 -> libmylib.so.1.0.0*
libmylib.so.1.0 -> libmylib.so.1.0.0*
libmylib.so.1.0.0*
libmylib.so -> libmylib.so.2.0.0*
libmylib.so.2 -> libmylib.so.2.0.0*
libmylib.so.2.0 -> libmylib.so.2.0.0*
libmylib.so.2.0.0*
The key thing being that both set the libmylib.so symbolic link. In a
multithreaded installation it's undefined which happens to set the link last.
The test code expected libmylib.so to point to libmylib.so.2.0.0. Ensure that by
building and installing lib2 after lib.
Task-number: QTBUG-66722
Task-number: QTBUG-66216
Change-Id: Ic513c772902273049c28e43fc1d83d550aafcd23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QJsonValue] fromVariant() conversion now converts
from QUrl and QUuid using special encoding forms to ensure best JSON
compatibility.
Change-Id: I56b444f9d6274221a3b7fffd150cdc5ca1f87ff1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For compatibility with other parsers that may expect it to be so.
Change-Id: I56b444f9d6274221a3b7fffd150cd66390f98fd5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
After a37785ec76 went in, it become
apparent that multi mouse button state handling in qtestlib is
non-existent, for details see QTBUG-64030 and QTBUG-63786. What
happened behind the scenes often was not what one would expect based
on the provided QTest::mouse* input sequence - events went missing,
incorrect events were generated, each subsequent test function
started with a state set from the function that run earlier. It is
easy to see how a minor change in one test could easily affect outcome
of other tests.
With a37785ec76, Qt platform plugins
are now responsible for sending explicit mouse button type and state
information; qtestlib should take full responsibility now as well.
But using the new API from a37785ec7 alone in qtestlib is not sufficient.
We need to reset mouse state between each new test function run (we do
this at function scope as that fits with the current qtestlib API user
expectations). This patch implements the necessary reseting logic.
Updated tst_qwindow.cpp::generatedMouseMove() to use QTest::mouse* APIs.
That test requires pressing multiple buttons, it was not possible with
QTest::mouse* APIs before this patch.
Added an auto test for multiple mouse button pressing/release in
tests/auto/testlib/selftests/mouse/. And few other tests which are
currently QSKIP-ed, but should be considered when re-designing qtestlib
APIs.
Task-number: QTBUG-64030
Change-Id: I39fdcbc73a467a7463ce2aed622bf22484095635
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Factor out a function to calculate the size and update the size when a
style sheet parent is set.
Task-number: QTBUG-64550
Change-Id: I3afe997085eae3cd48b7fe0a4c98582a8f572260
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Return value of qWaitForWindowActive should be checked as it is marked
Q_REQUIRED_RESULT.
One of the calls was failing, so remove it and wait for the next condition
instead.
Amends d0dffdfc01.
Change-Id: I0c0b2bf11504730477158a5e1fb3018f359a6fb9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The stdout of the processes used in the test was dumped if there was an error,
but the processes write their error messages to stderr.
Use MergedChannels process channel mode to dump both output streams.
Change-Id: I1645fd31c394da0871ee6ae36d37ca9a04d86052
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before there was a risk looking up e.g index -1 if there
were no visible sections in layoutAboutToChange.
Change-Id: Ic911e4292e8e8c4892fef1c0f34cf7dccaad2bac
Task-number: QTBUG-65478
Reviewed-by: David Faure <david.faure@kdab.com>
The refactoring to support multiple providers broke alias resolving
(e.g. "text/directory" would be an invalid mimetype, instead of being
resolved to "text/vcard"). The unittest didn't catch it because most of
it was running with a single mime directory (and therefore a single provider,
in the new model). Fixed by re-running a number of test methods once we
have a second mime directory.
Change-Id: Ib5da89ba79c11ed41813b2aff4bc71c30afcde7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The UBA in Qt was out of date, implementing the spec from pre
Unicode 6.3 days. It missed handling of directional isolates and
paired brackets.
This adds a completely new implementation of the UBA, that is
compliant with Unicode 10.
Added the test data from Unicode 10 to the qcomplextext auto
test and ensure that we pass the test suite.
Task-number: QTBUG-57743
Change-Id: Ie2d957bc9775d82f0a51d1c78dc6bd154f22847c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Has been flaky in CI.
Task-number: QTBUG-66708
Task-number: QTBUG-66216
Change-Id: I69878574a98139681100c1424d5bbf46cc4a87b8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The test's client processes are prepared for the server not being ready when
they try to connect and handle QLocalSocket::ServerNotFoundError by waiting and
trying again.
However, on Ubuntu 16.04 and 17.10 and possibly other systems, sometimes the
error returned by qt_safe_connect inside QLocalSocket is ECONNREFUSED instead of
ENOENT. This has caused flaky failures in CI, so wait and try again in the case
of QLocalSocket::ConnectionRefusedError also.
Task-number: QTBUG-66679
Task-number: QTBUG-66216
Change-Id: I61e3d5b052d84c5ba9d1746f2c71db37cedbf925
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Has been failing a lot lately
Task-number: QTBUG-66247
Change-Id: Id940a573eb299379cacceb836890cbe0b3c896b7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If _Thread_local is used on a block-scope declaration, it must be
combined with either static or extern to decide linkage.
Change-Id: I228b3520767197c6cdf5134ff5a666ab2aca33ea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They can be, if compiled with -Wl,-pie. Example:
$ file /usr/bin/ping
/usr/bin/ping: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0
And you can't detect via the interpreter, since libraries can have
them too:
$ file /lib64/libc-2.26.so libQt5Core.so.5.11.0
/lib64/libc-2.26.so: ELF 64-bit LSB shared object, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2
libQt5Core.so.5.11.0: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.17.0
Change-Id: I940917d6763842499b18fffd15143bb80ce0e531
Reviewed-by: David Faure <david.faure@kdab.com>
Do not clear the settings of QHeaderView during layoutChange when the
model is empty and the section count did not change. This will not work
when a section is moved or a section is replaced with a new one during
layoutChange. But since layoutChanged is also called on sorting, this
patch ensures that the settings are not cleared in this case.
This restores the behavior to the same as before 5.9.4.
Task-number: QTBUG-66444
Task-number: QTBUG-65478
Change-Id: I39989cfd45b42e58f49d18ec014d3a941cadb6c9
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
During (re)storing the sections within layoutChanged handling, the
hidden section size was not properly stored which lead to a section
size of 0 when the section was unhided afterwards.
Task-number: QTBUG-66413
Task-number: QTBUG-65478
Change-Id: I0b714c7e0530a1eae82b3bb0e0dc80ed576522d0
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Currently there is a bug in Qt regarding the PostgreSQL driver as it
does not correctly escape the table names when constructing queries
internally. Therefore, these tests are marked as expected failures until
the bug itself is fixed in Qt.
Change-Id: I74dadc187f8a08509128dfea27be99787e57ea51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This also accounts for some quirks on the PostgreSQL side:
- Null values for a related table are placed in a different
order when sorted.
- Functions (sum, count) return a different type than other databases
- Using quotes to account for case sensitivity with tables
Task-number: QTBUG-63861
Change-Id: Ib1894fa8d0c77d7045941f7c57be0d0acd8d117e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
TouchEvent::TouchPoint::pos was not updated in
QGraphicsScenePrivate::updateTouchPointsForItem().
To prevent the transformation being calculated repeatedly for each touch
point member, extract a function genericMapFromSceneTransform()
from genericMapFromScene() returning the transformation and use
that whereever multiple points are transformed.
Add a test, extracting helper functionality from
tst_QGraphicsItem::touchEventPropagation().
In addition, fold tst_QGraphicsScene::checkTouchPointsEllipseDiameters() from
c48f4bde00 into this test, so that
it is testing all transformations.
Task-number: QTBUG-66192
Change-Id: If71886d2c14c4e216f7781ea2f22f1adc444e6cf
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Move ivars into @implementation
- Use instancetype where applicable
- Use dot notation for property access
- Use subscript operator for dictionaries and arrays
- Format selectors consistently
- Use proper style for init methods
- Use generics instead of void pointers where possible
- Use "range for" loops instead of indexing
- Replace or replace IBAction/IBOutlet with void
Change-Id: I1667812a51d4dfe44ae80fe337cb1f4bc9699d92
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Duplex doesn't really make sense in the context of printing to pdf,
and the variable was only being used in QCupsPrintEnginePrivate anyway
Change-Id: I801634c56759572825b5c9549d7a1dc92e5697a0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Since the PlatformInputContext is shared between test cases, the set commit
string from inputMethod() was otherwise saved and could pollute other tests.
For example on Windows PlatformInputContext::commit() was called when the
QLineEdit was first clicked onto in tst_QLineEdit::testQuickSelectionWithMouse()
and inserted "text" in the middle of the text, rather than starting selection as
intended.
This led to tst_QLineEdit::testQuickSelectionWithMouse() failing on Windows at
first in CI, but then always passing the repeats when it was tested alone.
Task-number: QTBUG-66499
Task-number: QTBUG-66216
Change-Id: Id6bdd263d57fd6d08fb48f013542b55b132907ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
[ChangeLog][QtCore][QByteArray] Added QByteArray::isUpper() and
QByteArray::isLower() to check if a byte array contains only uppercase
or only lowercase Latin1 letters.
Change-Id: I7ab3c775bc714138d4be259ac6fa2cfc70467ed4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add formatting for registered enumerations based on QMetaEnum
and unregistered enumerations as hex values.
[ChangeLog][QtTest] QtTest now prints values of QFlags that failed to
compare with QCOMPARE.
Task-number: QTBUG-65845
Change-Id: I3eae6d20d3c0d72441ca6c4037d9a8dafa4b6357
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fix 'Too many segments for object format' errors for (Debug) builds
using Windows ICC.
Change-Id: Ie48f43199948477c426d0a4e557f039eda129b22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix 'unresolved external symbol __imp_Reg*' errors for builds
using Windows ICC.
Change-Id: I99cb6d53c45cadb31b5675182753f168a7bf4ea3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Switch to QTRY_COMPARE since thread-local references might be held shortly
after finished is signalled.
Change-Id: Ia32f1f45f6cc461352558e0f2acf9612f8a4639e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the focus is lost on an editor due to the application no longer
being the active one then we have to ensure the parent view is going to
get the focus when it is returned. Since the editor does not have focus
when this check is done we need to manually account for this case by
setting it on the parent view as if it would if the editor did have
focus.
Task-number: QTBUG-62253
Change-Id: I14ac347e9e3a2bfaa8715a45811b17c1c7cf15f8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The "crashes" subtest has several "expected" reference files. The matching
one was previously determined by checking the line count of the output.
This however does not work when there are several reference files with
identical line count as is now the case with boot2qt.
Refactor the comparison code from the QTest/preliminary void return to
the bool f(QString* errorMessage) convention so that all files can be tried.
While doing so, streamline the code and remove numerous unneeded
allocations of strings and regular expressions per compared line.
Task-number: QTBUG-65845
Change-Id: I722159d1753f2a36f0e497e315ffd81cb58cac0b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Has been failing on it, but not on any other platform.
Task-number: QTBUG-66396
Task-number: QTBUG-66216
Change-Id: I0b208c675a23fb4bc1808dd3aa4dfef9bddf136b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Previous version of Ubuntu used to be blacklisted and the test is still flaky on
Ubuntu 16.04.
Task-number: QTBUG-66390
Task-number: QTBUG-66216
Change-Id: Iec404879f61164b995f0df7348f4f4baf608ca90
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test sometimes ended up with:
QThread: Destroyed while thread is still running
Received a fatal error.
This was because as a member variable of the local struct the QThread object was
sometimes destructed before the signal connection quitting it was handled. Fix
that by making sure that the thread is finished before finishing the test.
Also moved connecting to the state machine's signal to be before starting the
machine. Because the counting of QStateMachine::finished signal could hit 1
after the first signal is emitted and the test could pass without the code
working, check that both of the signals have been emitted.
Task-number: QTBUG-66372
Task-number: QTBUG-66216
Change-Id: If14141e39f37541032ddd8c6471daf40a77b0469
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a main window, based on the observation that the original bug
report was about a typical main window.
The mainwindow typically has the mouse grabbed when clicking to open
a menu and all mouse events go to it. Mimick that in the test
by sending the mouse events to it.
Remove the code using QCursor::setPos().
Task-number: QTBUG-63031
Change-Id: I9117c9633f81aba8bdff235ce64884c489fdc9f7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Windows sends a mouse move with no buttons pressed to signal "Enter"
when a window is shown over the cursor. Discard the event and only
use it for generating QEvent::Enter as not to confuse tests.
This is preparing for the use of the new QPA API for mouse events.
Change-Id: I3eb7f3dad82d27d0b425c7eaf34b1eee11592074
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Without this fix, a fresh clean build of 5.9 will fail.
Change-Id: I69e4da382b07cc6e5e280e99478cbc3d44aa3f27
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It is flaky on Ubuntu 16.04 and openSUSE 42.3.
Task-number: QTBUG-66345
Task-number: QTBUG-66216
Change-Id: I06fb88ee65113136309a0faa0336dd11672bfe59
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtWidgets][QLineEdit] The textEdited() signal is now emitted even if the
QValidator has changed the user input.
Task-number: QTBUG-44046
Change-Id: Ife287269c7dcbb644cb03a291bf96f7db384ed56
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The possible key sequences for QKeySequence::Copy on X11 is Ctrl+C, then
Ctrl+Insert and at last F16. The order is defined in
QPlatformThemePrivate::keyBindings.
Task-number: QTBUG-46053
Change-Id: I86a0767e268088edfce98cfb07f9fb78f00d0713
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
If more than one VM tries to run the test at the same time, it times out. These
sharing violations were attempted to be worked around in 1c3dc8cfb, but the
workaround just leads to timeout, not success.
Task-number: QTQAINFRA-1727
Task-number: QTBUG-66216
Change-Id: If8bfd60dbb6575843680971d45b1c82e5beff534
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
[ChangeLog][QtCore][QString] Added the functions QString::isUpper
and QString::isLower to check if a string contains only uppercase
or only lowercase letters.
Change-Id: I12d3a47d4605eb4514842071e80a9ba0723d4e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has been observed that sometimes the output is not captured by QEMU.
Task-number: QTBUG-65845
Change-Id: Iddf888fb3aa019209dbe71f424d87884471784e0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This was the missing counter-part to indexOf(QWidget *), which is
sometimes implemented in user code.
Not sure why the original code doesn't use a for-loop and instead accesses
an out-of-bounds element, but I'll preserve the behavior of very old working code.
Change-Id: I7d7fa56b56a4626789774c15c23fdfef41d723e7
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Likely fail is 3d29a0dd74. Is preventing
merge from dev, so blacklisted for now.
Task-number: QTBUG-66324
Change-Id: Ieb522897e93d4a1b4c0e423fadd4138dfb089093
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qvarlengtharray.qdoc
src/corelib/tools/qvector.qdoc
Resolved documentation changes in favor of 017569f702,
which keeps the move overloads along with its const-ref sibling.
Change-Id: I0835b0b3211a418e5e50defc4cf315f0964fab79
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QTreeWidgetItem setData() function
Change-Id: Ife87e9e046621b464ad340bd9eb451355730e93c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test was blacklisted in 5.10 on opensuse, but it fails a lot on
ubuntu as well. While we are discussing a real fix for this, temporarily get this out of
the way.
Task-number: QTBUG-63152
Change-Id: I4f1d3b261013052636ee13eda30f94b647a43a38
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The peer Tests for QDBusAbstractAdaptor are so flaky that it's
very difficult to get any commits through to qtbase.
Task-number: QTBUG-66216
Change-Id: I8da80f71aa832e683f72129cb2d4785425d39c00
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When calling setSceneRect() on a QTouchPoint it will cause the
ellipseDiameters to be changed, whereas this should not be affected by
the scene rectangle as it should be in logical pixels.
Also add a manual test for visually checking the ellipse diameters on
various devices.
Change-Id: I1ee9207cb1a63cfef33fe904594c73aba221af5c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Timeouts with subsequent failures to delete the temporary
directories have been observed in COIN.
Previously, QProcess:terminate() was used to end the processes,
which does not have any effect on console processes on Windows.
Add a helper function which resorts to kill() on failure
to terminate().
Change-Id: I05539d1703280d34b392f2e8ff8565b9a04d703c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to save having to always run a query to get the tablename for
a known oid then we cache the result on the driver side. The oid stays
the same while the table exists, so only on dropping it would it change.
Recreating the table causes it to get a new oid, so there is no risk of
the old one being associated with the wrong table when this happens, if
the driver is still open at that point.
The benchmark added shows the improvement from the previous code, before
the results for PostgreSQL was:
RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
259 msecs per iteration (total: 259, iterations: 1)
whereas now it is:
RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
0.000014 msecs per iteration (total: 59, iterations: 4194304)
Task-number: QTBUG-65226
Change-Id: Ic290cff719102743da84e2044cd23e540f20c96c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use the clean implementation that does not use QCursor::setPos()
with the exception of macOS, where this causes
submenuTearOffDontClose() to fail.
Change-Id: I95a615c37bcf419ce1ede65b5ed79a5ec0568391
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
... and use it.
[ChangeLog][QtGui][QBitmap] Add overloaded QBitmap::fromImage that takes QImage rvalue
Change-Id: Idb6e6bb1645371996700349714041cc54bb3d005
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QFontEngine::cloneWithSize() is used by QRawFont internally when switching
a raw-font from one size to another using setPixelSize. For CoreText, we
use a subclass of QCoreTextFontEngine to keep track of the QByteArray data
of a raw-font, but failed to overload cloneWithSize, so we would lose the
data whenever setPixelSize was called, resulting in missing text rendering
in QtWebKit. We now retain the data as we should.
Task-number: QTBUG-65923
Change-Id: I7d4186a3c32a61d48d1e9388e43f2792e8e46081
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This way, it's lossless.
This commit is a cherry-pick of ab1e507574,
which was reverted.
[ChangeLog][QtCore][QVariant] Conversions of QDateTime to strings now
contain the millisecond components.
Change-Id: I5e421e32396d44e4b39efffd150b744e40fff3a1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Commit 8f52ad9fe0 ("ucstricmp: compare
null and empty strings equal") made sure empties and nulls would compare
equally, but may have broken the null vs non-empty comparison (which was
not tested). The commit message also said that it expected all callers
to handle null before calling into those functions, but that's not the
case for QStringView created from a null QString: the incoming "a"
pointer was null.
So just remove the checks for null pointers and rely on the size checks
doing the right thing.
[ChangeLog][QtCore][QString] Fixed a regression from 5.9 that caused
comparing default-constructed QStrings to be sorted after non-empty
strings.
Task-number: QTBUG-65939
Change-Id: I56b444f9d6274221a3b7fffd150c83ad46c599b6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
While we're at it, add a way to get it without the dashes too. I'm
calling it "id128", as in "128-bit ID", as seen in journald's sd_id128_t
type and the sd_id128_xxx() API.
[ChangeLog][QtCore][QUuid] Added a parameter to both toString() and
toByteArray() to allow controlling the use or not of the braces and
dashes in the string form.
Change-Id: I56b444f9d6274221a3b7fffd150cde706cfc5098
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
