Suppress message dialog of the test helper as does QTestlib.
Task-number: QTBUG-52714
Change-Id: I5efd7d72f77c7689500ecaccf46f1f9dfb312140
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Follow-up to commit 6fd205d5: document which version of danted shall
make one work-around redundant, document that another work-around is
still needed even with that v1.1.19; and remove a comment that
referred back to an XFAIL that commit 6fd205d5 removed.
Change-Id: I270b662528127c82184bff20b3cecea4f0c41b41
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QSKIP() causes the whole test to be skipped, where this work-around
for a known quirk of the test server only requires skipping a single
Q_COMPARE(); the rest of the test passes fine without it.
Change-Id: Ie4612bd428f4cb4b342fad908cc2784fbadf069c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Use QFINDTESTDATA to find the socketprocess helper executable.
Now tst_QLocalSocket::processConnection() passes when started from Qt
Creator without adjusting the working directory.
Change-Id: I97ca3334a381b3cd646647487529bcd90b969528
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I0c94a5c2846b48c8aea7ffff1435b8a7ccbd4d9e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
According to RFC 2640, FTP uses UTF-8 encoding. Fix the conversions
accordingly.
Task-number: QTBUG-52303
Change-Id: I615199b3d074fc3861f25df113dda672525766b6
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
QWindowsPipeWriter doesn't write in a separate thread
anymore.
Change-Id: Id978bfdfa2531be91cce94476ab9b0dff237bd61
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Commit 0307c008 removed the buffering of data-to-be-written from
QWindowsPipeWriter, because it was assumed that users of this class
(QProcess and QLocalSocket) already buffer data internally.
This assumption was wrong for QLocalSocket. The following sequence
localSocket->write(someData);
localSocket->write(someMoreData);
would not write anything on the second write.
Add a write buffer to the Windows implementation of QLocalSocket.
Task-number: QTBUG-52073
Change-Id: I6d0f03a722ec48138cbde3e2f69aae7dafe790d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
canReadNotification() could return 'false' if either the socket has
been closed, or the read buffer has reached the maximum size. Because of
this duality, waitForBytesWritten() should not fail as a result of a
canReadNotification() call.
Change-Id: I9a15fa174a3b982a7ce404913caa38fc19f64622
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Suppose a client connects while the QLocalServer is still in the loop
that calls addListener. The connection would SetEvent(eventHandle),
but every call to ConnectNamedPipe would ResetEvent(eventHandle).
Thus, the connection is never detected by the notifier on eventHandle.
Callers of addListener must check the connection state of every
listener to make sure that no client connected while setting up
listeners.
Task-number: QTBUG-49254
Change-Id: Ia961927ea76973708e6e3f73510695eb5d6a0e4c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In one code path the test checked for the emission of a readyRead()
signal without waiting for it.
This code path was never hit, neither on Windows nor on Unix platforms.
Change-Id: Ifbe464400a2a1ba8eab49bd60315289040e6bbde
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some embedded servers use LF to mark the end of an individual header,
but use CRLF to mark the end of all the headers. The GoPro WiFi
interface does this, as an example.
Change-Id: I227ab73622c84f439a6cf8703d020393c4d8bf69
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
The data function for this test re-used listenAndConnect_data that
has an additional column "connections" which was never used in sendData.
Thus sendData executed three times the same code which is just uselessly
burned CI time.
Copied the actually needed code of listenAndConnect_data to sendData_data.
Change-Id: I6cdb1c1b72cb4ce7be7c13e90eea30ac09a14914
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Remove several test from black-list - they do not seem to fail anymore.
Change-Id: Idb7d6925a4fdea9b47d963e33a455af0afb7b432
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It's possible to configure an interface so that it isn't the case. I have
no idea if this is a valid scenario, but the unit test shouldn't enforce
that.
ip addr can report:
inet 192.168.1.1/32 brd 192.168.1.255 scope global vlan0
valid_lft forever preferred_lft forever
Change-Id: I8de47ed6c7be4847b99bffff141c337575760bd9
Reviewed-by: Richard J. Moore <rich@kde.org>
When the remote peer closed the connection, a read notification needs
to always be emitted, otherwise the higher layer does not get the
disconnected signal. From the other side, underlying QAbstractSocket
object could temporarily disable notifications from the engine at
any time. To avoid possible blocking of the socket, take a pending EOF
into account when the read notifications are re-enabled.
Change-Id: Iac9d4e2f790530be3500baf5a2000f1f63df5cc2
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
That API has been available for WinRT and Windows
Phone for some time now. By using it to get the
machine name and for hostname resolution we can get
rid of some winrt-only code and use qhostinfo_win.cpp
on WinRT and Windows phone as well.
Additionally the required capability was added to
tst_qhostinfo so that this auto test can be run without
any manual editing.
Change-Id: I63fa5521bf8cdb0c919bd5a0100ea977c865622a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
When using cipher algorithms with forward secrecy an ephemeral key is
used to generate the symmetric session key. Beside the SSL certificate's
key, this ephemeral key is of cryptographic interest.
The ephemeral key is chosen by the server side - currently statically in
the Qt implementation - so it is only of interest on the client side to
check it. Therefore the ephemeral key is the null key if the connection
is set up in server mode or a cipher without forward secrecy is used.
Change-Id: If241247dbb8490a91233ae47f2b38952c6591bf4
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
In bind+connect scenario, rejected connection can trigger a read
notification while the socket is opened. But unlike UDP, reading from
the socket engine or emitting a readyRead() signal is not allowed for
the TCP socket in bound or connecting state.
To make a bind+connect scenario work properly, disable the read
notifications until a connection is established.
Task-number: QTBUG-50124
Change-Id: I7b3d015b0f6021fb9ff9f83560478aa5545f41f5
Reviewed-by: Richard J. Moore <rich@kde.org>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
(cherry picked from commit 0df5d07929)
Task-number: QTBUG-48326
Change-Id: I67d9ad36f7288c9c6bef51aa6253d7b187737601
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
