Some repos like qtimageformats don't generate a config file for
standalone tests because the repo creates no modules.
Amends de3a806def
Change-Id: Id42338804605a883f975feb5dd81eda5acc6e687
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Unfortunately not all repositories are marked as warning_clean
in their .qmake.conf files. For instance qtconnectivity and
qttools are not warning clean. Therefore we need to skip
warnings_are_errors flags on all targets created in that repository.
Add support for skipping the warnings are errors flags, by setting
a QT_SKIP_WARNINGS_ARE_ERRORS property on a target, and use that
within a generator expression with all the accumulated flags.
To mimic behavior of qmake, and set the property on all targets
created by add_qt_module, add_qt_plugin, etc, one simply needs
to set the QT_REPO_NOT_WARNINGS_CLEAN variable in the
repo project CMakeLists.txt.
Change-Id: Ib5a487af6601ae1519a0988a89f8083f94f92267
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
While the first patch that was required to fix duplicate symbols
errors was merged from dev to wip/cmake, the second one
7a605edc22 is not yet merged.
So revert the revert to temporarily fix static builds until we do
another merge from dev to wip/cmake.
This reverts commit 307cd64c57
Task-number: Fixes: QTBUG-79211
Change-Id: I72052513fc0e0183b3ce8270b4ce3f2ff44b664d
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds add_qt_manual_test() which is a simple wrapper around
add_qt_executable() which does not build under ${CMAKE_BUILD_DIR}/bin
or install the targets.
This could potentially be used later to tag manual tests.
Change-Id: Ic4e0a1d133009f5a858b9394347a0996cf42683f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When configuring qtx11extras on macOS, we ended up installing the
file, which made Coin think that at least one module was built,
and thus it tried to build tests as well.
Don't install the file if no modules were built, thus preventing
from trying to build tests in Coin.
Amends de3a806def
Change-Id: I920a0b40a6ded12140f251352da53b68eef6560d
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of processing included_children operations either before or
after the parent scope, collect all operations within that scope and
its included children scopes, and order them based on line number
information.
This requires propagating line numbers for each operation as well as
line numbers for each include() statement, all the way from the
parser grammar to the operator evaluation routines.
This should improve operation handling for included_children
(via include()), but not for regular children (introduced by ifs or
elses), aka this doesn't solve the whole imperative vs declarative
dilemma.
Sample projects where the improvement should be seen:
tests/auto/gui/kernel/qguiapplication and
src/plugins/sqldrivers/sqlite.
This amends f745ef0f67
Change-Id: I40b8302ba6aa09b6b9986ea60eac87de8676b469
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch renames some of the manual test by prefixing them with
tst_manual_ to make sure they are unique in the project structure. This
is a requirement for the CMake port.
Change-Id: I83e2152826e0f95c3378374ab1c9992412022109
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(cherry picked from commit 63a1a30a01)
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I092a26ef38b08c52d84adb027a1b1bdee8cc7f6b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
(cherry picked from commit ce187c4f0e)
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch renames some of the manual test by prefixing them with
tst_manual_ to make sure they are unique in the project structure. This
is a requirement for the CMake port.
Change-Id: Ie393b125ce5a35b7069cf006db0f3af8c4fda5b4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit 937e014e63)
Pass either --skip-subdirs-project to pro2cmake or
--skip-subdirs-projects to run_pro2cmake.
Change-Id: Ic444858f6fc6deb3c893782c0770993aa39d5579
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The regular expression used to eat the character that comes after
the x86 token, which was incorrect when matching x86SimdAlways.
Fix the regular expression to use a lookahead with a negative
character class of word characters.
Change-Id: I9ed8f9a490369bf5704b752f8bba3b7118a2cd5b
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A lot of project files include files like qtsqldrivers-config.pri
which do not exist when running pro2cmake. It should be safe to hide
this error messages when converting projects.
Change-Id: I4205010e537f67f9b276b4cb94ec30f847c43c68
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Don't needlessly show a bunch of special case debug messages
unless debugging is enabled.
There used to be a barrage of scary message when using
run_pro2cmake.
Change-Id: I49ab3522e11844a99653034b5f15a634a368d227
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Replace the use of the unqualified qvkgen target with the fully
qualified one, as we can be sure that that target exists during a host
build as well as when cross-compiling.
Change-Id: I31ce3d9f2fd629668a275da9114ab55339b82c31
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In gui's CMakeLists.txt we have
if (NOT ANDROID)
...
add_qt_simd_part(Gui SIMD neon SOURCES ...)
...
endif()
and later
if(UNIX AND NOT ANDROID AND NOT APPLE_UIKIT AND NOT INTEGRITY AND NOT (TEST_architecture_arch STREQUAL "arm64"))
add_qt_simd_part(Gui SIMD neon
endif()
Since add_qt_simd_part internally uses an OBJECT library to compile the
sources with different flags and then link into Gui (in this case), we
may end up with an error when add_qt_simd_part is called twice for neon,
because the constructed target (Gui_simd_neon) exists already.
We can re-use an existing target though, as the SIMD features is the
same.
Change-Id: I7a21c6e66b47e918a53fa3b1a7db9e053ecc8d87
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Every time the qtbase project was reconfigured, the list of
config tests results was appended to a cache variable which was
never reset, resulting in multiple copies of the same values
being written to QtBuildInternalsExtra.cmake.
Make sure to clean the cache variable before appending to it.
Also change the variable to be all upper-case, to be consistent
with other cache variables.
Change-Id: Ic12046730a080595e19377981a726bc330641dc1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A developer can pass either -DQT_NO_MAKE_TESTS=ON or
-DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built
as part the default make target (when you write just make or ninja).
With ninja, tests and examples can be built separately one by one,
by typing
$ ninja tst_foo
or
$ ninja example_bar
Same can be done with the Makefile generator.
$ make tst_foo
All tests / examples can be built in one go by typing
$ ninja tests/all
or
$ ninja examples/all
With the Makefile generator unfortunately it's not as nice and is most
likely an implementation detail, but it can still be done by running
something like
$ make -f CMakeFiles/Makefile2 tests/all
or
$ make -f CMakeFiles/Makefile2 examples/all
Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously repo/tests/CMakeLists.txt was a standalone project on which
CMake could be called. This was useful for Coin to be able to build
and package only tests, but was a bit troublesome because that means
having to specify the usual boilerplate like minimum CMake version,
which packages to find in every tests.pro project.
Instead of having a separate standalone project, modify the top level
project and associated CMake code to allow passing a special
QT_BUILD_STANDALONE_TESTS variable, which causes the top level project
to build only tests, and find Qt in the previously installed qt
location.
This also means that when building a repo, we generate a
${repo_name}TestsConfig.cmake file which does find_package on all the
modules that have been built as part of that repo. So that when
standalone tests bare built for that repo, the modules are
automatically found.
qt_set_up_standalone_tests_build() is modified to be a no-op because
it is not needed anymore. Its usage should be removed from all the
other repos, and then removed from qtbase.
Non-adjusted tests/CMakeLists.txt projects in other repositories
should still be buildable with the current code, until they are updated
to the new format.
Adjust the Coin build instructions to build the standalone tests in a
separate directory.
Adjust pro2cmake to generate new structure for the tests/tests.pro
projects.
Adjust the qtbase tests project.
Fixes: QTBUG-79239
Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The module does not have an associated library, but for some reason
on Windows install(EXPORT) still created Targets files which
expected a library to be present.
If then find_package(Qt6PlatformHeaders) was called, it would fail
configuration with not finding the library on disk.
Switch the module to be a HEADER_MODULE.
Also remove the extend_target call, because there apparently is no
need to specify the headers one by one (and also because adding
sources to an interface only library would break the configuration
step).
syncqt will be executed on all the headers under the module source
location, regardless of specifying them in the project.
Change-Id: Iec4cc8fab8906e6288dae423c878e260dd922ce5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
When a _nolink target is exported, instead of getting the original
namespace prefix, it gets the Qt6 prefix
(OpenSSL::OpenSSL_nolink -> Qt6::OpenSSL_nolink).
There is some special case code in Network autotests which tries
to access the former target name, which doesn't exist when building
standalone tests.
Make sure to create a Qt6:: library alias for _nolink targets during a
build (so before the library is exported), and change the Network
autotests project to use this Qt6:: namespaced library, which will
ensure it is found both in a standalone tests build and in a regular
Qt build.
Also make sure to actually call find_package to find the OpenSSL
library when building standalone tests, otherwise configuration will
fail.
Change-Id: I3da5b958e72e745a50380f8ab1644459a7c6b005
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't call qt_android_dependencies for interface libraries.
Also make sure not to set properties which don't start with
INTERFACE_ prefix.
Change-Id: I0afdffd34c9aebe0d7ac4731b57dd4d505f84570
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
It only makes sense for non-interface libraries.
Change-Id: I80ac942ed546a6ac866e827aa2026e4e6ac897b2
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
The reason is that interface libraries have to have properties
prefixed with INTERFACE_ and more importantly we don't set the
property for interface libraries at the moment.
Amends d1542e8a73.
Change-Id: I86bf99995278b9086fa0e3815e10d5d54d9ea4dc
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Now that 5f160a3699 is merged to
wip/cmake, we should be able to remove the previous workaround of not
linking in the bearer plugins.
Reverts 78b89547ad.
Fixes: QTBUG-79211
Change-Id: Iaa6633bd74d51ceeed9fa1ffb536445ef817764b
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Replace condition x86 to i386 to match other platforms.
Regenerate src/gui/CMakeLists.txt
Disable SSE4 on android x86 to match qmake.
Change-Id: Ic0d330206f2d70a79d72553aa3ff0f91ff58119c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Feature conditions that used BUILD_SHARED_LIBS evaluated to false,
e.g. FEATURE_framework. The options must be declared before the
configuration files are included.
Change-Id: I1ccda8234b334371d22e19f7f6d4fba3a1e7b857
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
