The bitmap cache for the first 64 signals being connected was only set when the
connection is added. It was never unset when the connection was removed.
Internal use of the connectedSignals bitmap is not hurt by it occasionally
saying a signal is connected even though it is not, since the purpose of those
checks is avoiding expensive operations that are not necessary if nothing is
connected to the signal.
However, the public API using this cache meant that it also never spotted
signals being disconnected. This was not documented. Fix the behavior by only
using the cache if it is up to date. If it is not, use a slower path that gives
the correct answer.
To avoid making disconnections and QObject destructions slower, the cache is
only updated to unset disconnected signals when new signal connections are
added. No extra work is done in the common case where signals are only
removed in the end of the QObject's lifetime.
Fixes: QTBUG-32340
Change-Id: Ieb6e498060157153cec60d9c8f1c33056993fda1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Spaceship operator was disabled for QCborValue, but not the test.
Change-Id: Icb91da689f62ef6de9f4fa926346505c5e50e9eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
PCRE2 does not support JIT on winrt. This test row takes a long time
(30 seconds here) without JIT and thus might cause test timeouts in
COIN when run on winrt.
Change-Id: I79d9f6be16dbe16594ae2bf51f353acd06b3d2fe
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Since Qt 5.10, qTo/FromBig/LittleEndian<float/double> stopped working.
It may be confusing, but big endian floats do exist, so not to break old
code, we should support them.
Change-Id: I21cdbc7f48ec030ce3d82f1cd1aad212f0fe5dd0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test is stable in Qt 5.12.
Task-number: QTBUG-60993
Change-Id: I0c366567121688d9518e90b5e8f9ec1b4006b7b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
on macOS, the test seems to be stable nowadays.
Task-number: QTBUG-39986
Change-Id: I18430c3feb27a5bee5474e1eb95f7d89b25f00a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
on macOS, where it was skipped but where it now seems to be stable/work.
Task-number: QTBUG-39983
Change-Id: I100a57f23b43074ebacc012be247d92acc6ae336
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Calling rowCount inside another auto test function yields unexpected
results, if rowCount fails. Without a check for QTest::currentTestFailed
the failure will not stop the calling function and other functions like
rowsInserted and rowsRemoved might happily continue even though their
requirements are not met. That caused a crash on winrt under certain
circumstances.
In addition to that TRY_WAIT now does not only wait for the given
amount of time, but also gives feedback about its result. Before
this change TRY_WAIT was basically useless, as it gave no indication
about its success/failure.
Fixes: QTBUG-71121
Change-Id: Ibd3f233a0b913db799814be97c4274d510643c74
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The state was forgotten from the translation layer, this is important for tree views.
Fixes: QTBUG-71223
Change-Id: Ief4004fe455889f9d5a7eb018bf34d37c36a6bd9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QTableWidget::takeItem() emitted cellChanged with row and column set to
-1. The internal functions searched for item after it was reset to
nullptr and therefore it was not found.
Since the modified cell is known because it's passed to the takeItem
function, the correct row/column can be retrieved from there.
Task-number: QTBUG-70478
Change-Id: I5ff5991c49f3200efe95fde4c7d0d28e19be7ebf
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test triggered a compiler warning for good reason, it made no
sense, trying to change it to what it was probably meant to be.
Change-Id: I01a848272b42dae2aaa58a4f5bed998644d864da
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Before commit 4d15f393a7 update requests
were handled by a timer on QWindow. Therefore they survived the closing
and re-opening of platform windows. Now, as the timer was moved to
QPlatformWindow, it gets reset when you close the QWindow, and any
pending update requests are lost. However, we do set the
updateRequestPending variable on QWindow when requesting an update.
Therefore, we can also restore the update timer on the platform window
when creating it.
Change-Id: I23b00f24a46706beac7d1455edd8a5623db46b22
Fixes: QTBUG-70957
Reviewed-by: Tim Jenssen <tim.jenssen@qt.io>
Reviewed-by: Thomas Hartmann <thomas.hartmann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
In some cases, a tool tip may be shown outside screen geometry, i.e. if:
- QToolTip::showText is invoked manually with a position outside.
- In tst_QToolTip::setPalette if there is no screen at (0, 0). This might
happen in a multi-monitor setups where one screen is taller than the other.
- On Wayland windows are (by design) not allowed to know their position on
the screen. This means that global positions can't be trusted.
This started crashing when QDesktopWidget::screenGeometry(pos) was replaced
with QGuiApplication::screenAt(pos)->geometry() because screenAt will return
null if no screen is found, while screenGeometry defaulted to the primary
screen.
This reverts to the old behavior of falling back to the primary screen.
This won't solve the issue completely for the Wayland case, but at least we
will stop crashing.
Change-Id: I42dd07cc21c2f9f0ea0d69f0c25bd46d8a2615a0
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QImage's operator>>(QDataStream&) did not set an error mode on the
stream on read failures. That would break QDataStream transactions.
Since the current QImage serialization cannot differentiate between
truncated and corrupted data, we set the ReadPastEnd error as expected
by the transaction system.
Also specify the expected file format on decoding QImage from stream,
to avoid all the format handlers' canRead() being invoked. This is
necessary since some of them may call ungetChar(), which fails when
the stream is in a transaction.
Also add testing of this feature to the QDataStram transaction
autotest. That required a slight rewrite of the fake sequential
QIODevice subclass. The previous implementation had incorrect
behavior of peek(), which is required by QImage decoders.
Task-number: QTBUG-70875
Change-Id: If3f1ca7186ad1e6ca0e6e8ea81d2b2fbece6ea01
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wrong option was used to set zlib compression level for png
setCompression with negative value uses default compression
setCompression with value between 0-100 converts to zlib compression level 0-9
setCompression with positive value overrides Quality option
Change-Id: Ic4b048a1e30d6940019c2a00a6c24d0c11e3f821
Reviewed-by: Alexandra Cherdantseva <neluhus.vagus@gmail.com>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When there were additional spaces between the function definition and
the first parameter, the parser failed to parse it when it contained
another function (e.g. 'qlineargradient(... rgb() ...)').
The reason for this was that ::until() needs the function at index-1 so
it can correctly count the opening parenthesis.
Fixes: QTBUG-61795
Change-Id: I992f556e7f8cd45550f83bc90aa8de2b4e905574
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use a template on the size of the char[], as suggested by Ville
Voutilainen. This resolves ambiguity about whether such look-ups
should be done via QString or QCborValue (not that it would have made
any difference).
When we come to add mutating indexing of QCborValue, chained
dereferences like map[i][j][k] need to stay in operator[] const
throughout, to avoid detaching intermediates to create references into
them due to using the mutating operator[] on the earlier dereference's
return. So const-qualify the QCborValue operator[] const variants at
the same time, to match those of QCborValue itself.
Change-Id: Ib1652ae9440fe3767a653afa2856b74040210e07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make the code consistent with the DomProperty::write() method.
Task-number: QTBUG-70613
Change-Id: I622b4a019a4473823584de97304f8324f2cf0c6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Perform a @Nx image file lookup when loading pixmaps.
Make drawBackgroundImage() handle high-dpi pixmaps,
here the layout calculations needs to be in device-
independent pixels
Fixes: QTBUG-36825
Change-Id: I61e6f53c59f61f3bd88c34a036349e51e8c8ad92
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Usually we focus in when we receive a click or equivalent.
QGraphicsScene by default also transfers the focus when you start a
touch on a trackpad or similar. Most of the time this also generates a
synthetic mouse click, so people don't necessary notice. However, at
least on macOS you can configure this behavior. With focusOnTouch
switched off, QGraphicsScene behaves as one would expect on macOS.
Fixes: QTBUG-59442
Change-Id: Ib87112640eef6b77892ad2490d80eedd055e6dce
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Change-Id: Ife72db5a0d7cb8abe55c60c519087e2b60f26990
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is a regression from commit 346c15102b, which creates a new QRegExp
in setFilterRegExp, losing previously set case sensitivity property
(i.e. when the code does proxy->setFilterCaseSensitivity(Qt::CaseInsensitive)
before setFilterRegExp).
Interestingly that commit ensured that setFilterFixedString would still
preserve CaseSensitivity, but not setFilterRegExp(QString).
Change-Id: I3d37d001ce6e86dd90e7e07431440a42607172f9
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
When a time-zone does a spring-forward, skipping an hour (either to
start DST or to move its standard time), there's an hour that doesn't
exist on the day in question. That hour can be the first hour of the
day, in which case using 0:0 as the default time is broken. So catch
this case and use the first time that day that makes sense.
Fixes: QTBUG-70823
Change-Id: I23dae9320a3cdd2c988841a7db1b111edb945730
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QUrl::RemoveAuthority is RemoveUserInfo | RemovePort | 0x10, so the
condition
if (options & QUrl::RemoveAuthority)
would match if any of the other bits for the username, password or port
were set, which meant we would skip the host comparison. Ditto for
username and RemovePassword.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused QUrl::matches to
incorrectly compare two URLs with different hostnames or different
usernames as equal, if certain QUrl::RemoveXxx options were passed.
Change-Id: I015970a03b874898bba7fffd155856ab9d6cb1be
Fixes: QTBUG-70774
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before this change we inserted newline only if an option has a
description and ended up with an arbitrary long line with all options.
[ChangeLog][QtCore][QCommandLineParser] Fixed a bug that caused the help
output to show two options or more in the same line if the options didn't
have a description.
Task-number: QTBUG-70174
Change-Id: Id54b9ae13ee596869e4dc14e09301aea19eed2f8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, the rects will pile up when the item is not part of a view.
Task-number: QTBUG-54275
Change-Id: I29c989e25ce0ca1ac0b87d0388a476ef1acd9cfd
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Add properties enabled_features and disabled_features the respective
library targets.
This makes it possible to query the enabled classes in dependent libraries
(for example, Qt for Python).
Add a test verifying whether the Open GL configuration is reflected
correctly in the feature properties to the existing test_opengl_lib
autotest.
Change-Id: I645c947073dbb36da3be81de6bc62ee0ba1e73d6
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: If030b56ad97e047d89d442629262b4839df306d4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
When a QTextCursor survives its QTextDocument, the internal
QTextDocumentPrivate pointer is set to null. There are checks for
this in all the QTextCursor functions to skip out early if such
a QTextCursor is used.
However, when executing the "if (d->priv)" condition in setters,
this will access the non-const operator->() of QSharedDataPointer
and detach the QTextCursorPrivate, and in the copy constructor of
this class, there was an unprotected call into priv->addCursor().
In theory, we could cast all the checks for d->priv to avoid
detaching, but in practice this doesn't matter, since the setters
will typically detach anyway later on.
[ChangeLog][QtGui][Text] Fixed a crash that can happen when calling
a setter on a QTextCursor after its QTextDocument has been deleted.
Task-number: QTBUG-70293
Change-Id: I8f6dc5bb344d1d824f673c0c220b68b7fee237a8
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Replacing the qmake test with the one corelib/thread/thread.pri uses
for those classes.
Change-Id: Ie803190b821736c89b056ae51b7dfe92046189eb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We were handling this properly, but not testing them. I guess we weren't
testing because the condition is a valid intermediate state, so
hasFailure() is correct it returning false.
Testing inspired by the bug reported in
https://github.com/intel/tinycbor/issues/137
Change-Id: Ib47c56818178458a88b4fffd1554ecfdd0af637e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Initialize the lastDir properly, to avoid the stroking algorithm doing
direction-change handling for a single line. That could cause a cap to
be painted for a single FlatCap line.
Also fixes a bug in tst_qpainter, revealed by the above fix. The
result drawPolyline was erroneously compared to the result of drawing
the lines individually, for a case where the former correctly paints
the pixel of the join point in the corner, while the latter by
coincidence used to paint the same pixel as a cap because of the bug
above.
Task-number: QTBUG-70101
Change-Id: Ie20eda33214cfe9e7627f17ef4c7a5b3835c9c24
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is already blacklisted for macOS 10.12 and reproducing in 10.13.
Task-number: QTBUG-61037
Change-Id: I464e42d0ae5ab24104250edc69a90454ba605eaa
Reviewed-by: Liang Qi <liang.qi@qt.io>
As the test was unstable, we qskip the failing parts
instead of mark the whole test insignificant.
Task-number: QTBUG-50842
Change-Id: Ib8f5b7ead07d65cc624fa72b190ecee0338c8183
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
tst_QMdiSubWindow::setOpaqueResizeAndMove checks if a resize of the mdi
subwindow works as expected by simulating mouse events. Those events are
sent to fast and therefore the operationMap of QMdiSubWindowPrivate is
not yet updated which let the test fail. There was already a call to
qWait(250) to wait for the 200ms timer but sometimes (esp. in virtual
environments) the timer was not triggered after this period.
Fix it by checking if resizeTimerId is set back to -1 which means that
updateDirtyRegions() was called.
Change-Id: I961ba80589d2f725a6858ba70b84fb35750a6964
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Both sqlite3_open_v2 and sqlite3_close are documented to return an error code:
https://www.sqlite.org/c3ref/open.htmlhttps://sqlite.org/c3ref/close.html
However, those were ignored (other than checking whether the operation
succeeded), causing QSqlError::nativeErrorCode() to always be "-1" when there
was an error while opening/closing the database.
Additionally, the error string needs to be read (via sqlite3_errmsg16) in
qMakeError *before* d->access is set to 0, or the databaseText() will always be
"out of memory" no matter what error actually happened.
Task-number: QTBUG-70506
Change-Id: I75cbf178c9711442e640afd26c4502214d20c598
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The default values for varchar columns were not decoded properly.
Task-number: QTBUG-46968
Change-Id: Ie13d48c316cd694240f7e287010b97afc8c6c341
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The test was computing GMT with a suffix added to it for the offset;
but when the offset is zero there's no need for it. Cleaned up the
logic so that it only checks for a "padded to two digits with zero" if
the number is single-digit (and use string arithmetic in preference to
wantonly complex .arg()ing; and use simpler names). Since we don't
try to check anything unless GMT does appear in the string (because
the actual zone ID was used, instead of GMT with an offset), the case
of zero offset has nothing more to check than that GMT was present,
the precondition for checking anything.
Task-number: QTBUG-70322
Change-Id: I0b8abe7e63d9d72fa9cf32f188b47a78a849044b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In openSUSE 15.0 /etc/os-release the ID of the OS was
changed from "opensuse" to "opensuse-leap". So every blacklisting
we did for opensuse, didn't cover opensuse-leap. This one adds
opensuse-leap as a blacklisted platform whenever opensuse
was blacklisted.
Task-number: QTBUG-70463
Task-number: QTBUG-51399
Change-Id: I5879eb34926757163973d8b9442eae58f47d2f11
Reviewed-by: Liang Qi <liang.qi@qt.io>
On platforms where char is signed, like x86, the following is an error
(narrowing conversion):
unsigned char x[] = { '\xc3' };
Change-Id: I495bc19409f348069f5bfffd15518f9ef4e43faf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QItemView::indexAt() was disabled since Qt 5.0 (and maybe earlier)
maybe due to it's long runtime (15s on my machine).
Speed it up by checking only some special positions inside the visual
rect (borders, center) as it will likely not fail on other positions but
succeed for the ones which get tested.
Task-number: QTBUG-22470
Change-Id: I5c7135757049176f9daca4afc1b7f40c75b9ecd9
Reviewed-by: David Faure <david.faure@kdab.com>
When the first row(s) of a QTableView is hidden, PageUp could not reach
the first visible row because logicalRow(0) is taken without checking
if the row is visible.
Task-number: QTBUG-70215
Change-Id: Ic7820352b8988accb685ea7d16908d3fa8bf2847
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Otherwise the QGLWidget's context may be owned by and used by the swap
thread when the resize happens on the main thread.
Change-Id: Id415747572e6b988924618b1df0efdee5fcb1805
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Before this fix, QStandardItemModel::itemData returns
a map containing role 255 which is used internally to store the flags.
This role is an undocumented implementation detail so it should
not be returned to the user.
[ChangeLog][QtGui][QStandardItemModel] itemData does not return role 255
Change-Id: Ibead3cba84cfe92b3c664bc8ce87508cbcbdc9bd
Reviewed-by: David Faure <david.faure@kdab.com>
This new test double-checks the bugfix for QSortFilterProxyModel::insertRows
in commit 70ba75519d. Previously, when using QComboBox on top of
QSortFilterProxyModel and calling QComboBox::addItem with row==rowCount(),
an empty item was inserted in one place, and then another item was modified
(instead of the inserted empty one). This test checks that the above bugfix
indeed fixes the behavior of QComboBox::addItem when used in this manner.
Task-number: QTBUG-69158
Change-Id: Id01345e0525694a57250c656222d626e2267aa8e
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
There was a QStringView::compare(QString, CaseSensitivity) but it's
good that the symmetric also exists
Change-Id: Ic789f11d41eb8cfa393cb51c19bd1f89bb87d912
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some people suggested the later, so let's have a second look at it
before it's too late.
Although I was in favor of the former I'm now having second thoughts.
connectTo() is meant to only be used in classes which have a clear dominant signal,
but there are rare classes that have two (example: QAbstractButton::toggled, QAbstractButton::clicked).
QAbstractButton::connectTo() would be ambiguous if we ever wanted to add these shorthand connects
to QtWidgets
Change-Id: I198ad3326d31dcf89b9c47a299124572ee7b11b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
They were incorrectly attempted to be read as Indexed8, instead use
the RGBA64 formats to read them with full accuracy.
Task-number: QTBUG-45858
Change-Id: I14fc3cb0d59fa2fc0e68fd870f3b32352c34161f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
...not just the debug flag. The information is saved outside of the CBOR
map for two reasons:
1) removing the hack that depended on how QCborStreamWriter and
TinyCBOR internally work, allowing for the extra parameter to be
written directly. We wouldn't be able to use that hack anyway and would
have needed a further, uglier hack to encode a byte whose value we
don't know.
2) outside the map, this information can be parsed more quickly and
then we can discard any plugins we shouldn't actually load.
Since we're doing this for a flag, I decided to move the Qt version
there too for reason #2.
Change-Id: I61ecce6b1324410bbab4fffd153d4e5fc696d19e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In preparation for Qt 6 deprecating the binary JSON format. Also reduces
the size of the metadata a little: for the xcb platform plugin, it went
down from 264 bytes to 138; for the jpeg image plugin, it went from 320
to 135.
I've had to change the signature so older versions of Qt won't try to
parse the CBOR data as Binary JSON. Unfortunately, before QJsonDocument
could get a chance to reject it, qJsonFromRawLibraryMetaData() needed to
allocate memory and that causes crashes with Qt < 5.11.2.
Change-Id: Ieb48f7c0dd0e4e0fb35efffd153bee34e16ce347
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's almost completely blacklisted anyways, and the parts that are
not are flakey.
Change-Id: I4601d751a2963c94c62ec439dd78b874034069a0
Reviewed-by: Liang Qi <liang.qi@qt.io>
We no longer support macOS 10.11, iOS/tvOS 10, or watchOS 3.
Change-Id: Ide03d8fac06185ef4162ba75ee54a0adf6916905
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
For ControlType != QSizePolicy::DefaultType, qCountTrailingZeroBits()
is used which, MSVC 15.8.1 does not consider constexpr due to built-ins.
Exclude the check by #ifdef.
Task-number: QTBUG-69983
Change-Id: Ifc3dc3d94a804246bee1705fc8f3ac9b04ee4d32
Reviewed-by: Alexander Shevchenko <sav_ix@ukr.net>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Synced QMetaObjectBuilder::MetaObjectFlag with the MetaObjectFlags enum
from qmetaobject_p.h. Also added a few comments for Qt 6.
Change-Id: Ieccd5cf8d512a6bf7256b2f4db88d45662774536
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This feature is needed to register complex types (e.g. Q_GADGETS) at
runtime, using a single constructor method and added type parameter.
Without having the type id available to the Constructor it is impossible
to specialize behavior, thus requiring separate constructors for each
type. Generating these separate constructors at compile time is easy,
but not at runtime.
[ChangeLog][QMetaType] QMetaType can now register constructor for a set
of dynamic types.
Change-Id: I6071271d0e157864594dd07b4bc3a0abbeb15a44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When adjusting the tab order for compound widgets, it can happen that
the order is already correct. The check for this case forgot one case
which lead to a garbled focus chain.
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Task-number: QTBUG-10907
Change-Id: Ic3242746bdcf3a4db6ea8daa1498381500ca116d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
To avoid bothering the user who just wants to build all the test cases
in qtbase. It is better to move the docker related testing to the check
target. Then, it won't break the build procedure and force users to
finish test server provisioning in advance.
Change-Id: I2c4212297342c3eec7bcbebff9f991b7346d9503
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit e798e8a03b)
the test uses CoreFoundation api directly, so it must link it
explicitly.
amends 6c8f32388b.
Change-Id: I76b7d8ab41d6a66138eb45bd0f067cfee8e96cb8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the test uses CoreGraphics api directly, so it must link it explicitly.
amends b0abe20d4.
Change-Id: I734bfbedff56df731c1e528670f686565b63f3b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These autotests are not currently working with the Ubuntu 18.04
platform being introduced to the CI.
Task-number: QTBUG-70227
Task-number: QTBUG-70226
Task-number: QTBUG-70224
Task-number: QTBUG-70223
Task-number: QTBUG-70209
Change-Id: Ibe7cafd37763d7d305d8c3d9ec17bc6339db744a
Reviewed-by: Liang Qi <liang.qi@qt.io>
When QSqlQueryModel or QSqlTableModel is created it will create a
QSqlQuery which defaults to using the default QSqlDatabase connection.
If this connection belongs to another thread then it will throw a
warning as this is not safe to use. Since the QSqlQuery is always
recreated when a query is set, the instance which is a member of
the class can effectively be invalid until a new one is set.
Task-number: QTBUG-69213
Change-Id: I68a5dd59fe62788f531d59a0680da11b118ee383
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The table and macros weren't extensible enough for non-Latin-based
languages.
Change-Id: I950f06de57aaf6bd0b24e0056e4acee2fb655f3d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This autotest fails on the Ubuntu 18.04 platform.
Task-number: QTBUG-70153
Change-Id: I2a2b0075a046664cdf5733d8629f634b4e33dc6f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
We have #if-ery on Q_OS_DARWIN controlling an expectation of gettign
"GMT+1" and "GMT+2" instead of "CET" and "CEST" in two tests; this
turns out to not be a deficiency of macOS so much as of how we
configure Coin's VMs. While we fix that, we need to ignore failures
in these tests, so that we can pull the #if-ery out and clear the
blacklist once the VMs are set up properly.
Task-number: QTBUG-70149
Change-Id: If3577200cf980b3329161ab3eea7bd2e9d0124e0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The test had some shortcomings:
- Flakyness due to not waiting for the file dialog list
to be populated.
- It assumed that the hardcoded directory name
____aaaa... always would show first in the list. This may
not be true on Windows, where names like .designer show above.
- On failure, the test directory would leak.
This manifested in failures like:
FAIL! : tst_QFiledialog::clearLineEdit() '(fd.directory().absolutePath() != QDir::home().absolutePath())' returned FALSE. ()
To fix this, use QTemporaryDir and introduce predicates that
can be used to check whether the dialog has been populated
and the right file/directory is selected by pressing cursor down.
Use the temporary directory as not to pollute the home directory.
Change-Id: Ic504b91325993dcd6099c99e125e7ed8ff1d7672
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: David Faure <david.faure@kdab.com>
This reverts commit fd38c97a6c.
Apparently our actual VMs for 10.13 don't get this right, although the
ones used in testing did (prompting the fix this reverts). We
probably have mis-configured VMs, but this is the quick-fix to get
development moving again.
Task-number: QTBUG-70149
Change-Id: Ib96755d8e21d9b226e22fc985f13f34fa04117b1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Under certain circumstances, if you had a widget with a QOpenGLPaintEngine,
and drew QStaticText into this, and then later had Qt Quick access the same
cache and try to resize it, we would get a crash because the resize function
would have a pointer to the paint engine and try to access its shader manager
(which would now be null, since this is outside the begin()/end() phase of the
paint engine.
The solution is to reset the paint engine pointer to null on the cache once it
has been populated and it is no longer needed.
[ChangeLog][QtGui][Text] Fixed a possible crash when combining QStaticText,
QOpenGLWidget and Qt Quick in the same application.
Task-number: QTBUG-70096
Change-Id: I7383ad7456d1a72499cfcd2da09a5a808d4b3eff
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
CLDR up to somewhere between v29 (used by 5.9) and v31.0.1 (used by
5.10 and later) claimed Costa Ricans don't include fractions in their
currency; now it claims they expec two digits. Apparently one of them
does expect those digits, so this is the regression test I'll be
cherry-picking back to LTS, to accompany the CLDR updates they need.
Task-number: QTBUG-70093
Change-Id: I138772cc6013fa74de4f7c54b836cac83421eab2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fails on previous 42.3 and also 15.0. Just covering "opensuse" saves
us from new commits every time we upgrade our openSUSE. We have a bug
open of it after all.
Task-number: QTBUG-51399
Change-Id: I5c0869daea41b1886faba3d0caaa0804a3705d54
Reviewed-by: Liang Qi <liang.qi@qt.io>
_q_interpolate<T> subtracts 2 arguments of type T,
for unsigned types this can cause wrapping around
Task-number: QTBUG-57925
Change-Id: Iffa59f413579a3d5de8cb728fe71443d8e8a04aa
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Frameless obscured windows do not receive WM_PAINT/expose events on
Windows. Qt::WA_Mapped needs to be set on them to ensure updating works.
Task-number: QTBUG-39220
Task-number: QTBUG-52039
Task-number: QTBUG-58575
Task-number: QTBUG-63927
Change-Id: Ic6c11f2be96378b6a6b61296f1f3e13cd49b50a6
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
After updating MinGW toolchain from 5.3.0 to 7.30 test starts to fail.
Task-number: QTBUG-69947
Change-Id: I850d854b27e1cb4e1dd2cb600e8e79bd18bff4a0
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Simo Fält <simo.falt@qt.io>
They have been blacklisted on windows and macOS previously. Now failing
on WinRT as well.
Task-number: QTBUG-69962
Change-Id: I30ca23005b082e820ee896fa36a8984a1536ad6b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Assume two MIME types A and B are registered, both with the same glob
pattern, A being parent of B, A with some magic rule, and B with another
magic rule. Given a file that matches the glob pattern and the magic rule
of A, the resulting MIME type depended on the order of registration of A
and B, because it would just check if some glob matching MIME type was
also a subclass of the magic matching MIME type.
The patch prefers the the MIME type that matches by magic if that
matches by glob pattern as well (i.e. A in our example).
The "recommended checking order" of the spec does handle that case.
Task-number: QTBUG-44846
Change-Id: I2af43f6199faf9a42cd9c35d3a045441afbd6217
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This patch implements the support for QRegularExpression in
QSortFilterProxyModel.
[ChangeLog][QtCore][QSFPM] QSortFilterProxyModel now supports
QRegularExpression.
Task-number: QTBUG-46810
Change-Id: If932d55f98f9b8bcf3a72c03ffd51da52cb50ad1
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
The match method still uses QRegExp. This patch updates the code to use
QRegularExpression and translates the wildcard patterns to a suitable
form for QRegularExpression.
[ChangeLog][Core][QDir] QDir now uses QRegularExpression internally for
wildcard matching. Note that QRegularExpression might not give the
exact same result as QRegExp as its implementation follows strictly the
glob patterns definition for wildcard expressions. Nevertheless, the
tests for QDir return the same results as before.
Change-Id: I095959443ac7362f7534e35454eff038061fca82
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This patch refactors the wildcardToRegularExpression method to generate
a simpler regular expression. It also fixes some shortcomings of the
previous implementation.
Tests have been updated to ensure all cases are properly supported.
Change-Id: I454e3fe8fe0bb663b2f319d6fa2fa8aec626c50d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Deep down in CoreFoundation, ICU is used, and this test triggers a
heap-buffer-overflow with AddressSanitizer. Disable this test for macOS
until Apple fixes it.
Task-number: QTBUG-69875
Change-Id: I43e4a69708be8cde3bde87c57db21f5b717f96b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QAccessible::StaticText should be mapped to UIA_TextControlTypeId instead
of UIA_EditControlTypeId.
Task-number: QTBUG-69894
Change-Id: If2f8f55d2be492c02a3af5b1813ca12cf774a33a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Before this change, if you try to insert a row at the bottom of QSortFilterProxyModel
the row will be inserted in the source model at position proxy->rowCount rather
than at the bottom. This causes insert at apparently random positions in the source.
[ChangeLog][QtCore][QSortFilterProxyModel]
QSortFilterProxyModel::insertRows(row,count,parent) with
row == QSortFilterProxyModel::rowCount will insert at the bottom of the source model
rather than at the row QSortFilterProxyModel::rowCount of the source model
Task-number: QTBUG-58499
Task-number: QTBUG-69158
Change-Id: Ie78416c8fbc429303b8c9c98375630e3e4d85f6d
Reviewed-by: David Faure <david.faure@kdab.com>
After the behavior of setItemData has been changed following QTBUG-45114,
QStandardItemModel was lacking an interface to clear all the data from a single index.
Task-number: QTBUG-69616
Change-Id: Ide0b5bb6358439fc42c474df8b044fbace6def8d
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: David Faure <david.faure@kdab.com>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
qt_nameprep() already reset the string to its original length to
indicate failure, but we didn't handle that in qt_ACE_do(). So make it
have a return value whcih makes it easier to handle that case and do
handle it.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused URLs whose hostnames
contained unassigned or prohibited Unicode codepoints to report
isValid() = true, despite clearing the hostname.
Change-Id: I41e7b3bced5944239f41fffd1545b7274c4b419d
Reviewed-by: David Faure <david.faure@kdab.com>
The API originally proposed was flawed in the sense that the setter
function would use a modified version of the parameter given which would
have make it a black box for the user. This patch fixes that by removing
that setter and providing a static method that will return the pattern
suitably modified to be used by QRegularExpression the same way the
escape method does.
[ChangeLog][Core][QRegularExpression] Implemented support for wildcard
patterns through a static method.
Change-Id: I0054bcaffd7525dac569f54fa81f73b7e4544b2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I've tried to reproduce the failures in the CI a couple of times now,
but it keeps passing. Let's leave some debug output in the test so
that if/when it does fail, we might know a bit more about why it does
so.
Task-number: QTBUG-69492
Change-Id: I5b39ac692e9026ce4b25cd13d342b11e061b777b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Nathan Collins <nathan.collins@kdab.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
tst_QtEndian's transformRegion_template() was getting a
signed/unsigned comparison warning when T was unsigned in a
QCOMPARE(T-value, 0); so use T(0) instead.
Change-Id: I78cb2ab96f79393def65ed2c020aa3039017ab92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That way, we'll get told all the cases that fail, rather than only the
first. Provoked by investigation of failures that turned out to be
caused by QTBUG-69875.
Change-Id: I8fa2902cbbcb307cbe1fdec2e7d8d6b0c3eb998a
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Problem:
CMake Error in CMakeLists.txt:
A logical block opening on the line
.../qtbase/tests/auto/cmake/CMakeLists.txt:149 (if)
is not closed.
Broken by change 02ed1b36da
Change-Id: I6c04721edbccaa9fcdb53af92d33dfa87eeaebb8
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QMessageBox window ignores QCloseEvent if it was created
with Ok button and the detailed text was set. But it can
be closed if it contains only one button.
Make it closable if there are two buttons and one of them
is the "Show Details..." button.
[ChangeLog][QtWidgets][QMessageBox] A message box with two
buttons, one of which is the "Show Details..." button,
can be closed by clicking the X button on the window's
title bar.
Task-number: QTBUG-69526
Change-Id: Iba09e38561eb3898dc2aecfd38d8519d512a71c1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The CLDR data contains eight locales with numeric territory codes, 001
for World, 150 for Europe and 419 for Latin America. The last was
already known in our enumdata.py, but as "Latin America and The
Caribbean", which is not supported by the CLDR, so I've amended it
while adding the other two. This gives us support for Esperanto and
Yiddish (among others).
[ChangeLog][QtCore][QLocale] Added support for World and Europe as
(numeric) "country" codes ("territory" in CLDR terms), thereby
enabling support for Yiddish and Esperanto, among other locales using
such codes.
Task-number: QTBUG-57802
Change-Id: Ibb1180fb720743a3a0589527649d10f3c9cd123d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests kludge round Apple's use of GMT+1 and GMT+2 as names for
CET and CEST on Darwin; but 10.13 actually gets the names right, so
side-step out of the kludge when on this version or later.
Change-Id: Icb8a2f3ac30f0f621a19042dc03e0d281782dd41
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
They have a separate type that we can't recognize directly, but we
can check if we can recognize the QFlags<T> form, though we have to
add a lot of template-conditions to avoid triggering QFlags static
asserts.
Change-Id: I00853682c5376dd3cc411ff151f47bce2389e277
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Adds support for 16bit per color image formats in QImage. This makes it
possible to read and write 16bpc PNGs, and take full advantage of the
16bpc paint engine.
[ChangeLog][QtGui][QImage] QImage now supports 64bit image formats with
16 bits per color channel, compatible with 16bpc PNG or RGBA16 OpenGL
formats.
Task-number: QTBUG-45858
Change-Id: Icd28bd5868a6efcf65cb5bd56031d42941e04099
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Adds an enumName to QMetaEnum to carry the name of the enum since for
flags that doesn't match the name of the Qt type, but is needed if the
flag is scoped.
Change-Id: I1c0f77eb9e40e6fd1eb6a59bea77caf0f33fcf43
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Test that we don't silently replace an invalid TLS configuration with
the default one (for now, the only thing that is considered to be
non-valid - is having non-DTLS protocol set).
Change-Id: I6f714b009cf1345a085a3f26d638fc31330f1a94
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This autotest fails on Ubuntu 18.04.
Task-number: QTBUG-69892
Change-Id: I3673d06f06fcd8db307fc53c27724b227978f20d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A weird behavior of the DTLS server example, when linked with 1.0.2,
exposed that client code, requesting an invalid protocol (for example, SSLv3)
can end-up with connection encrypted with DTLS 1.2 (which is not that bad,
but totally surprising). When we check the protocol version early in
setDtlsConfiguration() and find a wrong version, we leave our previous
configuration intact and we will use it later during the handshake.
This is wrong. So now we let our user set whatever wrong configuration they
have and later fail in TLS initialization, saying -
'Unsupported protocol, DTLS was expected'.
Auto-test was reduced - the follow-up patch will introduce a new
'invalidConfiguration' auto-test.
Change-Id: I9be054c6112eea11b7801a1595aaf1d34329e1d2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The QTRY_VERIFY was needed because the window doesn't initially have a handle,
and QTest::qWaitForWindowActive(QWidget *) only checks the active state of the
widget if it does, returning false if not.
This broken logic should be fixed, but for now let's make it clear what's
actually going on by using an explicit wait for the window handle.
Change-Id: I6dd89e0894efed14f4b9a2562dfe8ca76b5ef89c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When showing line and paragraph separators at an offset from the start
of the string, the end of string pointer would be incorrectly set, and
we would read past the end of the string. If any part of this memory
happened to match the line or paragraph separator, then we would
overwrite it and have a crash.
I couldn't find any reliable way to test this, since the crash depends on
the contents of the memory after the string allocated by the algorithm.
But with an overflow of 100 000 characters, I found that it crashed every
time I ran the test.
[ChangeLog][QtGui][Text] Fixed potential crash when using
QTextOption::ShowLineAndParagraphSeparators.
Task-number: QTBUG-69661
Change-Id: I17d1996b883560bacdc7ce114c8aeb2b0108faea
Reviewed-by: JiDe Zhang <zccrs@live.com>
Reviewed-by: Michal Lazo <xlazom00@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This test was un-blacklisted in 4050ee6ac7
but apparently it is still not stable.
Task-number: QTBUG-69666
Change-Id: Iaf933ee27d54ebbfa52d0a8d7b1def0ca91808e7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It's useful to know how many times the signal was emitted, because it
gives us insight into why the test may have failed, especially when
it's difficult to reproduce.
Task-number: QTBUG-69492
Change-Id: I94796ed880512b060e0a724c87edde8c3b91bb7c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Tests could change this property, and since the majority of the tests
share testWidget instead of creating local instances, we should be
thorough when cleaning up.
Change-Id: I6039fb6857f4f788f809b1d1fd491b4ef34923ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The majority of the test reuses testWidget. While this may be faster
than creating a QDateTimeEdit instance on the stack for each test,
it introduces issues when certain properties aren't unset when cleaning
up. This happens easily when new tests are introduced which rely on
certain properties, for example.
Rather than making the newly introduced step-modifier-related tests
use testWidget, this patch goes with the simpler option of hiding
testWidget, just like other tests currently do.
Eventually we should probably switch to using local instances
everywhere.
Task-number: QTBUG-69492
Change-Id: I4d5625be0b7c72db793346f43fe3a7e7c1241f13
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-69648
Change-Id: I08bd892e2b6a733f3cda32091463745e8b8feed7
Reviewed-by: Simo Fält <simo.falt@qt.io>
By making the test independent of fixed top level widget sizes, it can
also be run on platforms, that do not support this feature.
Task-number: QTBUG-68297
Change-Id: I6945d259801360a9819b9b631d0a7497d3d27a9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
We had 30s and 60s only, which isn'tenough for the Qt CI.
Task-number: QTBUG-69741
Change-Id: I00e04a465fcf4fc1a462fffd154782999e84ef8b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The min/max section size was not checked when setting the default
section size. This was an oversight when the check for min/max section
size was added to resizeSection().
[ChangeLog][QtWidgets][QHeaderView] setDefaultSectionSize() now
checks if the given value is inside min/max section size
Task-number: QTBUG-69431
Change-Id: I1b5704282927ce5a8520f52174ebf91d9840bc8a
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The majority of tests use QPluginLoader::setFileName implicitly, which
refuses to do any work in static builds. Therefore the majority of tests
are skipped. But in the future we'll get tests here that for example use
QPluginLoader::staticPlugins() and for that we want to include the
sub-directory in the build and test run.
Change-Id: Ib8ec274e22ac8050feaca8967eb8626b53876b92
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I'm intentionally not testing improperly-paired surrogates, since those
can't be encoded in CBOR.
Change-Id: I0d3cc366baaa49f3ad28fffd154240287ce34c22
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before libnss-mdns package is added to boot2qt dependency, the QEMU
devices should keep using the remote test server. There are two Linux
QEMU devices using 'linux-generic-g++' and 'linux-lmx7-g++' target
mkspec.
Relates to yocto/meta-boot2qt (Change-Id: I480f45)
Change-Id: I7870d3a184109e0abf712b4513148cf9a4520189
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
A typo meant the color-table was not fixed. For safety fallback colors
are also made opaque.
Change-Id: I3e609882177604910c4343c86f00221a89af9078
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Do not overwrite stdout/stderr by default, but only if requested.
This restores the behavior of QProcess::startDetached of Qt 5.9.
Task-number: QTBUG-67905
Change-Id: Idccf7b0da7bd80f88a0624286ddf2851bc974fb1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
with a case when we fail to ignore/pre-set one of possible
verification errors.
Change-Id: I23b06243b61acef1ef3576c51529f3ef6601ba7d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When the connection has been encrypted we will,
in QHttpNetworkConnectionChannel::_q_encrypted, emit 'reply->encrypted'
in which user slots can be called.
In the event that the user calls abort it will, however, not abort until
the next time it goes back to the event loop (which might not happen
until after the request has already been sent).
Task-number: QTBUG-65960
Change-Id: I96865f83c47f89deb9f644c86a71948dbb0ec0d0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That's actually how ignoreVerificationErrors (and QSslSocket::ignoreSslErrors)
are used to set the expected/known verification errors before handshake.
Auto-test updated too.
Change-Id: I9c700302d81ddb383a4a750fafd594373fb38ace
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A default-constructed QJsonObject has no data payload, it is only a pair of null
pointers. So, when it becomes necessary to 'materialize' such an object, a
special global emptyObject constant is used as the substitute payload. There is
a small problem with this global constant though, namely that it's is_object
flag is unset. In other words, the emptyObject is not an object, but an array.
Fix by setting the is_object flag on emptyObject.
The example code in the bug report
QJsonObject parent;
QJsonObject child;
parent["child"] = child; // 1
child = parent["child"].toObject(); // 2
child["test"] = "test"; // 3
runs into this problem on line 1. Inserting the default-constructed child means
inserting a copy of emptyObject. On line 2 a pointer to this copy of emptyObject
is retrieved and cast to an object. But it's not an object, it's an array, so
things go wrong hereafter.
Specifically, on line 3, two inserts are performed, one from operator[] and one
from operator=. Each insert increments a compaction counter. The second insert
triggers compaction (QJsonObject::insert calls Value::requiredStorage calls
Data::compact) and compaction branches based on the is_object flag. Replacing
line 3 with
child.insert("test", "test");
causes the example to appear to work since compaction is not triggered and the
JSON serializer does not look at the is_object flag. Still, any further insert()
calls would trigger compaction and memory corruption.
Task-number: QTBUG-69626
Change-Id: I8bd5174dce95998bac479c4b4ffea70bca1a4d04
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If we ever need to add QCborValue to the bootstrap library, it's
unlikely that we'll need this part. And by splitting it, I can make the
code handle more cases, that hadn't been properly handled before.
Change-Id: I2f630efbbce54f14bfa9fffd154160c0ad893695
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no such file, if one of the "directory" components of its
path is not, in fact, a directory. Added a test for non-existent file
(specified to give empty canonical file path) as well as a test for a
file in a sub-directory of a known file. The former incidentally
tests for QTBUG-29402, fixed long ago.
Change-Id: I60b80acc0f99f0a88cdb1c4d191af7384f3a31c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use one QStringLiteral instead of repeating a QLatin1String(), that
was passed to a function that has to convert it to unicode; do the
conversion at compile-time.
Reducing i % 256 is fatuous when i ranges from 1 to 100.
A QFile will close() itself on destruction, no need to do it explicitly.
Especially when *not* close()ing the *other* QFile that was left open.
Change-Id: Idb39312d9c9beaf082b7cead574bc6bb9bb3a775
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Unix, we wouldn't even *try* to truncate if the file was open for
appending. The combination may be an eccentric choice but - at least
when it's combined with reading - I can imagine use-cases for it; and
we should (at least try to) deliver what we're asked for, even if we
can't think why anyone would want it. So actually enable truncation
when asked to.
Amended some tests to check this works and corrected the QIODevice
documentation of mode flags (which misdescribed the special case that
implies Truncate). Removed special-case code, to apply truncate when
writing but not reading, since it's been made redundant by the
pre-processing of mode done in QFSFileEngine::processOpenModeFlags().
[ChangeLog][QtCore][QFile] When opening a file, if Truncate is asked
for, or implied by other flags, it shall be attempted, regardless of
what other options are selected. We previously did this on Windows;
now we do so also on Unix (even when appending).
Task-number: QTBUG-13470
Change-Id: I1e08d02cfbae102725fccbbc3aab5c7bf8830687
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For keys, QSettings escapes all characters outside of [-a-zA-Z0-9_.]
by using percent encoding, and changes '/' to '\'. That is,
settings.setValue("qt.*", true)
will be written to an .ini file as
qt.%2A=true
This means that QSettings can not be used to write general-purpose
qtlogging.ini files. Fix this by applying the reverse transformation
method from QSettings when reading in the .ini file.
[ChangeLog][Logging] Qt will now accept qtlogging.ini files
written by QSettings.
Task-number: QTBUG-69548
Change-Id: I55b7a8b433291268dc6855901f72b1c04f8ee6d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I'm not sure why QSFPM purposefully emits dataChanged for a source
dataChanged that triggers a layoutChanged (i.e. due to sorting, multiple
rows are moving around). (This predates the git import in Qt 4.5.)
Surely whoever is listening will not gain much from the "small" dataChanged
after the "big" layoutChanged... anyhow, this documents the current behavior,
at least.
It also proves that the bug I saw long ago (changing a filtered-out
value used to emit dataChanged(invalid, invalid), IIRC) is no longer present.
Change-Id: I8975c549db88226b2b3393de9f8dca4f4109df15
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This change frees the tests of their dependence on the Qt internal test
server (qt-test-server.qt-test-net). It makes the developers run the
tests out of Qt testing infrastructure.
If the user has installed Docker engine on their host, the test servers
will be built up inside separate Docker containers, and then, the test
case goes with the Docker-based test servers. Otherwise, the test case
will keep using the Qt internal test server.
Task-number: QTQAINFRA-1686
Change-Id: I518bc3675bfd658938509744b0e7e0610bc8bf66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
More Qt-style and more natural, also, shorter names.
Change-Id: I97bd68a8614126d518a3853027661435dc4e080d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Keep the original class name around for a little longer so we can
generate the correct scoped enum in the moc output.
Task-number: QTBUG-47652
Change-Id: Ib5934316fa786cc475335b03c86b8ec2dc239055
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When we have the named keys and not just integer values, we can output
something unambiously that closer match how the enums should be used.
Output of enums without proper metadata is left unchanged
Before:
QSurfaceFormat::ColorSpace(DefaultColorSpace)
QPainter::CompositionMode(3)
After:
QSurfaceFormat::DefaultColorSpace
QPainter::CompositionMode(3)
Change-Id: I537e879ba8b5c555b2aae9ba831facc88d430443
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The copy-assign operator tests against other.d being NULL but the
copy-constructor didn't. This can only matter if the value being
copied has been moved from, so we could probably replace with an
assertion in practice, but we should at least be consistent.
Amended test to check this case too; and verified new test crashes
without this fix.
Change-Id: I46872a677775944bbdf6a9112e719873e574ae60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch renames rather awkward 'remote' into more conventional
'peer' (similar to what we have in QAbstractSocket).
Change-Id: Ifc45e538b8adf9cc076bd7aee693277829fd94dc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All test cases use QPluginLoader which will not work for static builds of
Qt.
Change-Id: I7dcddcd5213681bd3ae4cd85e49ee0bb5748f687
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Visual Studio complained about the usage of a potentially uninitialized
variable which made compilation fail.
Change-Id: I0bc9d1e47d3b00b047912164c3bc4197a2058f85
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The code I introduced in 4ee7425794 only
dealt with systems that reasonably used a 64-bit off_t parameter. Turns
out that we don't turn on largefile support on 32-bit Android, which
meant that the fix caused a regression.
[ChangeLog][QtCore][QFile] Fixed a regression that caused QFile::map()
to succeed or produce incorrect results when trying to map a file at an
offset beyond 4 GB on 32-bit Android systems and on some special Linux
configurations.
Task-number: QTBUG-69148
Change-Id: I2c133120577fa12a32d444488bac3e341966f8d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The helper application is only needed for Unix platforms, so there is no
need to build it for other configurations.
Change-Id: I4ebb896c66d3ded016f72fdbe631ec2f1276db22
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Turned it into a data-driven test, with the old start-of-time as one
row, in order to add a regression test for an alleged MS API bug in
Windows XP.
Task-number: QTBUG-12006
Change-Id: I632ecc854f50f4183a990c8a27826ede9bd20e55
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCommandLineParser::addOption returns false in case of an error.
Tests should check it.
Change-Id: I3507e1c236a15a7c0a77c0c80f8dba65b664a535
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This function can be used to create std::array without the need
to explicitly provide the size of array. It also has a specialization
that allow to generate sorted array at compile time. Sorted array can
be beneficial for example in binary search.
Change-Id: Ifc7e06e451812fce2ab94293959db5e9cc038793
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
To avoid (even more) duplicated code, "qt_test_helper" ensures the
policy of putting a test's helper application next to the test's
own executable.
The helper executable is suffixed with "_helper" to avoid name
clashes with its folder.
Change-Id: Ic50cb1daa257e7ffc75440c10a3b90fd39424683
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add a framework for reading and decoding stored graphical texture file
formats. Includes decoders for the PKM and KTX formats.
This is basically the same texture file reading that was added to
qtdeclarative for 5.11, but has been refactored to be independent of
the scenegraph and opengl.
Task-number: QTBUG-67026
Change-Id: I87d8117550d8a2112f4f58c03e9ac6b3249cbc5a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
ObjectBoundingMode has inconsistent behavior and is deprecated in
favor of ObjectMode.
Change-Id: I748f6283f3db5869bb9a67c08bf5f16abc6f95b0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-69599
Change-Id: I575e6f52a539e03ab37ca62e580889854ddb9781
Reviewed-by: Simo Fält <simo.falt@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-68864
Change-Id: I799defcec3a41d86a604bfcd4c2e1081ae4e0e53
Reviewed-by: Simo Fält <simo.falt@qt.io>
Wrong test was blacklisted for this commit.
This reverts commit 85607bd70d.
Change-Id: Ica5272799afec88c05e2cd137835bcdcb587836e
Reviewed-by: Simo Fält <simo.falt@qt.io>
Using QFileSystemEntry::isAbsolute() broke handling of resource paths.
Extended QDir::absoluteFilePath() tests to cover absolute resource path
and some UNC variants also resolved in the same fix.
Amend existing filePath tests to use drives where needed.
Task-number: QTBUG-68337
Change-Id: I4f02cf67828ad93e562857118f8442037f18bab7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A RAII style class which calls a function at end of scope.
Example usage:
auto cleanup = qScopeGuard([] { <my cleanup code> ; });
[ChangeLog][QtCore] Introduced QScopeGuard.
Task-number: QTBUG-62894
Change-Id: Ife67f5c76255a1fafbae03367263da0bac9a0070
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The "boot2qt" platform needs to be blacklisted,
not "ubuntu-18.04".
This reverts commit 0d49ac0ffc.
Change-Id: I768a66c56f5fc7e0771473152579ed1c01bbbdb9
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This reverts the following commits:
d12d2949d126c3bec09b49b08f96e8
We can't easily predict all code paths for QDesigner
with such a microoptimization. We also don't want
to generate three different string constructions
depending on some sophisticated heuristics.
[ChangeLog][uic] The -no-stringliteral option is now deprecated and
UIC will not generate QStringLiteral anymore.
Task-number: QTBUG-65251
Task-number: QTBUG-51602
Change-Id: I34a5a1934a8df19c5c84ac2ba8e5168ce5665037
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Eight bytes into the Binary JSON header there's a 32-bit little-endian
size, which qJsonFromRawLibraryMetaData uses to determine the size of
the stored metadata. That value is passed as a size to QByteArray, which
means certain values could cause crashes due to being too big or via
sign-extension in 64-bit.
[ChangeLog][QtCore][QPluginLoader] Fixed an issue that could cause a
crash when certain damaged or corrupt plugin files were scanned.
Change-Id: I117816bf0f5e469b8d34fffd153dc5425cec39a7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It might have been fixed in the three years since it was marked
insignificant, and we can't investigate the crash while it's not
tested.
Task-number: QTBUG-50747
Change-Id: I99cdeb55e207d10fe524cd5f4868f042c64eb7d3
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Kept the intended word (rather than "number system" or "numeral
system" as might seem more natural) since CLDR's
common/supplemental/numberingSystems.xml uses numbering in its name
and in the XML tag-names in its contents. Thanks to Kari Oikarinen
for noticing, in review.
Change-Id: I85077611f9de8c4e812e1b5324fa2e99868b7b95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This should improve reporting and ensure we know about each failing
case, not just the first, when one fails.
Change-Id: Ic00272201f69a2fd8508df23b1d746ea605aa539
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Cleaned up some related #if-ery in the process.
Change-Id: I70f3152f2096ec34f36782fa1c3329f51c9b34f0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CSS geometry constraints such as "min-height" or "min-width"
will set size constraints on the widget.
Removing the stylesheet should remove these constraints.
Task-Id: QTBUG-69418
Change-Id: I1008e4390281c90112303d72dd7d59a8acddfcd9
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Routine update in preparation for 5.12
* omitting Chakma because QLocale can't represent the zero digit,
* de_DE no longer uses vorm./nachm. but AM/PM
[ChangeLog][Third-party code] Updated CLDR to version 33.1
Task-number: QTBUG-67654
Change-Id: If20c47bb030abc3700b4f5a592152e617e2767c2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Rewrote some of them away, in the process, using string arithmetic.
Change-Id: Ie1a29abefab001889a22a8bc66c7eee608496786
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
This is preparation (the WS-only parts) for splitting up some
over-long lines, in the course of which I also fix some indentation.
Change-Id: I800490e328b5e16d40685dff04c09cd145d5eacf
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
When using actual memory allocation, limit to 64 MB, not the full file
size. On most systems, the memory map technique will work, so this won't
even be tried. In any case, we don't need the fix for the OOM situation
that was applied in commit e211ab76d7.
As for the memory mapping technique, this commit limits the allocation
to reasonable values given the virtual memory addressing space. Half a
gigabyte is probably acceptable on 32-bit systems, where there should be
a contiguous space for the OS to allocate the file in. This commit also
fixes an overflow when converting from qint64 of the file size to ulong
(32-bit on 32-bit platforms and on Windows).
For 64-bit systems, we currently limit to 1 TB.
Change-Id: I117816bf0f5e469b8d34fffd153dc1705a8eedc4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There was no public API for doing case-insensitive comparisons
of QStringView.
Task-number: QTBUG-69389
Change-Id: I1b021eefec35e135b97fb87704c8dc137232d83d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixing some issues that could cause intermittent or environment-dependent
failures. One kind regards the use of multiple QTest::mouseMove()
calls in sequence internally using the QCursor API, causing timing
dependent failures. Switching to the override that does not require the
QCursor API, where possible. Other test could fail depending on the size
of the screen.
Change-Id: I4a368955ddbb48f729dcdf74c20eb163329936b2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The logic seems to be simple - if client code on error signal
tries to close TLS socket and this socket has buffered data,
it calls 'flush' and 'transmit' or even 'startHandshake' as
a result, which in turn will set and emit error again. To auto-
test this, we initiate a handshake with pre-shared key hint
on a server side and both client/server sockets incorrectly
configured (missing PSK signals). We also do early write
into the client socket to make sure it has some data
buffered by the moment we call 'close'.
Task-number: QTBUG-68089
Task-number: QTBUG-56476
Change-Id: I6ba6435bd572ad85d9209c4c81774a397081b34f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch allows the developer to pick which keyboard modifier
increases the number of steps a QAbstractSpinBox takes when the user
interacts with it.
The modifier can be either Qt::ControlModifier (default),
Qt::ShiftModifier or Qt::NoModifier. Qt::NoModifier disables the step
modifier. Note that on macOS, Control corresponds to the Command key.
Holding the modifier increases the step rate when:
- scrolling;
- pressing the up/down keys;
- pressing the spin box up/down buttons.
[ChangeLog][QtWidgets][QStyle] QStyle::SH_SpinBox_StepModifier allows
the developer to pick which keyboard modifier increases the number of
steps a QAbstractSpinBox takes for the following interactions:
scrolling, up/down keyboard keys and the spin box buttons. The
Qt::ShiftModifier can now be used, or the feature can be disabled
using Qt::NoModifier. Previously, only Qt::ControlModifier could be
used as the modifier.
Change-Id: Ib5518127e86a8f67798a9a1d6e860c6e35896e6f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Do not return false for loading an empty .qm file - that is, a valid
file without any translations. We're already shipping empty .qm
files for English translations of Qt since a while, mainly as a
stop for the QTranslator::load(const QLocale &, ...) logic.
Note that QCoreApplication::installTranslator() will still return
false for an empty translation file - which is ok, because it
arguably does not make much sense to install it.
[ChangeLog][QtCore][QTranslator] It is now possible to load qm files
without any translations. This is particularly useful for the
language the untranslated strings are written in; logic to
load translations can now handle the source language like all
other languages.
Task-number: QTBUG-31031
Change-Id: Ibcb84aa755538cb2fa21b14f8635295a58440bbb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This flag was introduced to serve as a replacement for a dedicated "interactive" boolean
argument in method calls guarded by Polkit.
Change-Id: Ida91c9872e70f8ca6672563d0ca6642f38c498ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To resolve the challenge of connecting Docker containers from the host
without extra user-efforts, Avahi is used to publish the Docker-based
test servers (Docker containers) on a local network. It is a free
Zeroconf implementation, and it provides multicast DNS (mDNS) service
discovery. By default, mDNS only resolves hostname ending with the
".local" domain. In this change, the domain name of test servers is
changed to "test-net.qt.local". As stated in the standard, the DNS query
for a local domain will be sent to the mDNS multicast address. It avoids
the need for root access to modify system files.
Task-number: QTQAINFRA-1686
Change-Id: I255fba0720ee6d0e84c9cb5ca9289d4466578922
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
When a screen is positioned to be above another, then the toolbutton
menu could be shown on the wrong screen if it was deemed to not fit
below the button the same screen. This ensures that it shows it on the
right screen when there is sufficient space to do so.
Change-Id: Ia626b28f74c1931904ff5b30cca17e63914d3c79
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Handle hard zero independently in each coordinate, otherwise hard zero
is never equal to anything but itself.
Task-number: QTBUG-69368
Change-Id: I8b1131472bb92efc706a04e0b067e2211a5ccb0c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QByteArray] QByteArray::toInt(),
QByteArray::toDouble() and the other number conversion functions
now ignore leading and trailing whitespaces, as their QString
counterparts already did. For consistency reasons, the same
behavior was added to qEnvironmentVariableIntValue() also.
Task-number: QTBUG-66187
Change-Id: I8b5e478ea8577b811d969286ea9e269f539c1ea4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... and various other cleanups.
This patch re-factors tests that relied on QCursor API (directly or indirectly via
QTest::mouseMove widget overload) to use the QTEST_QPA_MOUSE_HANDLING code path.
Misuse of QCursor API causes tests to be flaky.
Removed Qt::X11BypassWindowManagerHint as it is not really needed. Based on
the comment where this flag is used, it would be needed for all test functions
that use mouse events. That assumption is not valid. A window is expected to have
received its final position when QTest::qWaitForWindowActive() returns. There were
issues with this on Unity, but those have been fixed.
Un-QSKIP-ed QTBUG_6986_sendMouseEventToAlienWidget for Q_OS_WIN.
Un-QSKIP-ed hoverEnterLeaveEvent for all platforms.
Un-QSKIP-ed bypassGraphicsProxyWidget for Q_OS_MAC and Q_OS_WIN as the test
passes on those platforms. According to QTBUG-33067 it used to crash with 5.2.0.
Removed unnecessary mouseMove() and stray mouseRelease() in mouseDoubleClickEvent().
Removed unnecessary show()/setVisible() on items that are being added to the scene -
items are visible by default.
Among other randomly spotted issues, one worth mentioning is that when adding
items to the scene after the view is already shown, we need to ensure that the scene
is updated (e.g QSignalSpy + QGraphicsScene::changed) before interacting with it. As
an example, mousePressReleaseEvent() only passed because of random luck that the
invalid coordinates were still within the bounding rect of the button. This patch
does not attempt to cleanup all instances of this anti-pattern.
Task-number: QTBUG-52546
Task-number: QTBUG-26948
Task-number: QTBUG-33067
Change-Id: I2ccbc004c1cb4f5b31c70c8568ee591c458d8446
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Similar to commit cd64a96b31 we also need
to normalize the strings before comparison in order to be compliant with
the ECMAScript test suite.
This patch also adds the remaining test cases from
built-ins/String/prototype/localeCompare/15.5.4.9_CE.
Since the same tests are also failing with strcoll/qt_compare_strings,
this simplifies the code to always normalize except when using ICU
(which gets it right by default).
Change-Id: I16b32da7fc70dc7e6725c49f66fe9941d0bf3a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This makes QCborValue more future compatible, as code written today for
tags that QCborValue does not recognize will continue to work if
QCborValue gains support for it in the future.
This change also obviates the need for reinterpretAsTag(), which I had
not written unit tests for as I knew this change was coming.
Change-Id: I052407b777ec43f78378fffd15302bdc34f66755
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing network test server has some limitations. Most notably, it
is not accessible by every Qt developer. Also, some services don't allow
simultaneous access, which causes flaky test results.
Instead of centralizing all the services to one physical machine, the
idea is to build up several dedicated servers inside separate Docker
containers.
1. Create testserver.pri and integrate it into the make check command of
Qt Test.
2. Define QT_TEST_SERVER flag for changing test parameters at compile
time.
Task-number: QTQAINFRA-1686
Change-Id: I0422ddb97eb8c11b4818771454851d19671253b1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
According to RFC 6347 a DTLS server also must retransmit buffered message(s)
if timeouts happen during the handshake phase (so it's not a client only as
I initially understood it).
Conveniently so an auto-test is already in place and needs just a tiny
adjustment - handshakeWithRetransmission covers both sides.
Change-Id: If914ec3052e28ef5bf12a40e5eede45bbc53e8e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Variable was declared outside #if-ery but only used inside,
leading to warnings when the define wasn't set.
Change-Id: Iad6a236bdf76b8ca0a58a84509d19f7e1a3e2df2
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
Change-Id: I9b07208413b9e101569a22505ad41f07ade4062b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
This matches an earlier fix for tst_QDateTime.
Change-Id: Idaf34a9d60d84202fd41d15455209457cc281f60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The compiler was generating some vectorized code for qresource.cpp but
it wasn't very efficient. So improve upon it and make use in other
places where we read UTF-16BE strings.
[ChangeLog][QtCore] Added an overload of q{To,From}{Big,Little}Endian
that operates on a memory region.
Change-Id: I6a540578e810472bb455fffd1531fa2f1d724dfc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Questions:
1) should QCborMap::extract return value_type (a pair) instead of just
the value?
2) should the both return the iterator to the next element too, like
erase()?
Change-Id: I052407b777ec43f78378fffd15302a9c14468db3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change only adds them to the registry and reserves the IDs. The
next commit will handle conversions.
Change-Id: I56b444f9d6274221a3b7fffd150d2d49f40940c2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Similar to the changes made for tst_QLibrary:
0ac09c40f2
but even less intrusive.
Change-Id: I4bc0ba385e639f07f9b39cf8ba9542c27be8a3ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Writing out one test result per line in the test data files is
excessive and only bloats the log, given that this algorithm
is rarely changed.
Task-number: QTQAINFRA-2037
Change-Id: Ib9e568c7ded73d45e4b64671e97d5581a74f8f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes ambiguous template instantiation for types that derive from both
a QObject and Q_GADGET. For such types we treat them only as QObjects
as they extend the functionality of the gadget.
Task-number: QTBUG-68803
Change-Id: Ic42766034e14e5df43c4e6f7811e2c0be1dc7e74
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
To make the minimum amount of changes:
- Extract the library files into the expected hierarchy.
- Introduce a variable with the path to the directory.
- Make the static function a member function so it can use the variable
Change-Id: Ibf3106c3606d198a8deb8cb2a5cbde57207221c7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes sure the tests are skipped on Wayland.
Task-number: QTBUG-62188
Change-Id: Ia50d6cc02fbbac0fb6b77a16eb6372c1adb422d8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Input value which is over the highest acceptable value, but consisting
of a number of digits equal to or less than the max value should be
considered intermediate.
[ChangeLog][QtGui][QIntValidator] Input value with over the highest
acceptable value, but with equal or less amount of digits than the maximum
value is now considered intermediate.
Task-number: QTBUG-59650
Change-Id: I71a77c9c266f0f3b62c71ac6cb995019385c1cf5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
If a display is placed above a primary screen which has the top left set
to be 0x0, then menus that are defaulting to go up can still be
displayed on that screen when the menubar is placed on the bottom of it.
This ensures that this is the case and also adds a manual test to aid
verification of it in the future.
Change-Id: Ib657ccdc1aabfe1586c72585c087ac80a6c632c2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The existence of the helper application confuses Coin which will
result in an error.
Change-Id: I3edf3f27acbe133b180d41a8ae950991e9a5b5da
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The test and its helper were removed some time ago.
Change-Id: Id82a2a1bf829f272e9c1447e697935934c923092
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I017b501506c54c4b89773d2b949c097598bc7049
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I53d5238ff36706eb9c6f8eb04b954ec595ca30de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I55078563304959c41e0dd9bb7bb91a6fc51e005a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By disabling the "stdinprocess"-related tests/code...
... but differently. After fixing my earlier mistakes I'm getting
segmentation faults when it executes a couple different library calls
after the QProcess object has started.
Task-number: QTBUG-68596
Change-Id: Id42a1f939c000754a187dee90c4a4cdfec816232
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The "app" subfolder was already excluded in the .pro-file but Android
supports QProcess, so lets include it in the build. Unfortunately it
currently has trouble and crashes (the child process or both processes).
So we skip those tests.
Task-number: QTBUG-68596
Change-Id: I2e6d0869c408bf08b22c02145db8ce522c64c617
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To make it run we make sure it finds the syslocaleapp, however since it
causes a crash we skip the test that uses it...
"formatTimeZone" was failing, but it is the exact same issue as in
e08ba34f26, so we solve it the exact same
way.
Change-Id: Ifd5c796735775dad94acf55210cf18c0f4d375ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Same issue as has been seen a few other places: path to executable being
wrong, and then a crash when the paths are fixed.
Change-Id: I77a596c6e52d2a02a69a6b9dfe91f878b3ffe07c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The row names for this test were very unspecific.
After reverse-engineering what they are testing, I gave them proper
descriptive names, which allowed me to notice that there were tests
for "filtered in after sourceModel->setData" but not for
"filtered out after sourceModel->setData".
Change-Id: Ib79108db803ae77fb65d29cf0c0ef96c26655980
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTableView::doItemsLayout() updated the scroll offset for the vertical
header after layouting was done. Since the scroll offset affects the
viewport of the editors, the adjustment was done too late.
Therefore we update the scroll offset right after the scrollbars are
set inside QTableView::updateGeometries()
[ChangeLog][QtWidgets][QTableView] Fixed calculating geometries
for editors
Task-number: QTBUG-48244
Task-number: QTBUG-49548
Change-Id: I3b057764cf99d42d861928a1c73277d34b440f9a
Reviewed-by: David Faure <david.faure@kdab.com>
It was observed on OpenSUSE VM in CI - apparently, even after succesfull
read from UDP socket error was not UnknownSocketError. While it's under
investigation, the DTLS auto-test should limit itself by DTLS things and
barely test IO success (socket-wise) when needed.
Change-Id: I0773a02c591432b0d6c894f4131f70e41dc7ed72
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It all started from the compiler's warnings about 'this' captured but
not used in lambdas. While fixing this it was noticed that 'client' socket
has a lifetime longer than the test case itself (the socket has a parent,
which is tst_QSslSocket object). The 'server' socket was simply leaked.
So there is no guarantee that some of them (or both) later, after the
test failed in one of QVERIFY, for example, does not emit 'encrypted'
upon receiving more data; this will result: in reading/writing from/to
invalid memory location (captured local 'encryptedCount') and/or probably
exiting event loop when it's not expected to do so.
Change-Id: I51de0493d989a5ba36de2cef58d35526c0e26cda
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QTest::addRow expects a format specifier; this usage makes GCC complain
with -Wformat-security. Use the "old" newRow call instead.
Change-Id: Ieed8e4f64ff5e3d0d4e87325629d20ed6839ff9d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you're on a Unix platform which don't have the necessary defines then
the thread will never be launched due to an error. Skip the test
instead.
Change-Id: I83159988b8f330a750c7aa328a8805e4fa478070
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
at the time this patch was conceived, it was meant as an exercise in
getting rid of usages of ProString::toQString(m_tmp). however, this was
meanwhile superseded by use of toQStringView().
but the change itself should have been done a long time ago already, and
there is no harm in going through with it.
on the way, this also unifies and fixes some of the error messages.
Change-Id: I337aff994c508df783df4794c3fa0762d83a691b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Using SSE 4.1 because of the need for PMINUB.
Change-Id: Ib48364abee9f464c96c6fffd152ebd3f8ea7fe94
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
With ICU and on macOS it appears that the comparison is done on a
canonical form, while CompareString(Ex) does not do that, as the added
test verifies. Explicit normalization fixes that.
As a bonus, this also unifies the code path between regular Windows
and UWP by unconditionally using CompareStringEx (which requires
Vista or later).
This issue surfaced while running the ECMASCript 6 Conformance Test
Suite in QtQml.
This re-uses the existing test for localeAwareCompare, which was
disabled on Windows, macOS and Linux with ICU (the common case).
Change-Id: I52440fce60b54745ead1eff005ec51e98e2a79ec
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I034752b4e5d22b98f6def95fb53c2b1947dded03
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QFileDialog::selectedMimeTypeFilter() returns either an empty
filter in the case when a platform file dialog doesn't implement
mime type filters, or initiallySelectedMimeTypeFilter() in the
case of Qt's file dialog. In both cases the result is incorrect.
Make it return a mime type filter corresponding to a selected
name filter. As a result, tst_QFiledialog::setMimeTypeFilters()
has to be fixed: QFileDialog::selectMimeTypeFilter() can't select
a name filter for an invalid mime type, and "application/json"
is not supported by RHEL 6.6, so replace it by "application/pdf".
Change-Id: I58d3be860a9b5e8a72cba86d74b520178115a812
Reviewed-by: David Faure <david.faure@kdab.com>
When removing rows, the tester is looking at the data of the row
"just before" and the row "just after" the removed rows, to see if
they are still the same at the end of the removal operation.
Guard this with bounds check, in case there is no row just before
or just after.
This is the opportunity to use modeltester in tst_qidentityproxymodel,
which was already a testcase for removing the only row in a given parent.
Change-Id: Iec8228c16b9c670b794e2665356d153679178494
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When testing zones "America/Mazatlan" and "Mexico/BajaSur" the test
crashes from an assert. Skip testing the zones for now.
Task-number: QTBUG-69132
Change-Id: I595089647792e9a2c094d63cb837584b8cdc9cb9
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The previous approach of having the signalbug helper in a subdirectory did
not work for shadow builds, as QFINDTESTDATA would not find that dir. By
putting both test and helper into the same directory, the helper will be
found in the test's current working directory.
The second problem was that not putting executables into debug/release
subdirectories might have lead to the WinRT AppxManifest being overwritten
by the wrong configuration. When Qt is configured with -release for
example, it was possible that the debug manifest (Manifest files are
always created next to the target) is written last and thus contains
debug VCLibs as a dependency.
Change-Id: Ia39315432860405642542449296c16dd2ae9fa9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It causes most of the fails seen on Android.
Task-number: QTBUG-69064
Change-Id: I2f97fea41ee78e7962b8c34ed996bbe4bcb88732
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Skip a few tests that Android's time-zone information doesn't suffice
to get right.
Task-number: QTBUG-68835
Change-Id: Ibf8d213c96b29d74fc478a0ede686ae52b5200fb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The original code was added by b316c3ac5e
(in 2012). This patch changes two things:
1) We now rely on WM to position a window based on the set gravity. It
should not be necessary to calculate coordinates manually as was done
in windowToWmGeometry(). We don't even know the decoration size before
the window is mapped.
2) We now update gravity whenever needed instead of hardcoding based
on what Qt APIs (setGeometry vs setFramePosition) where used to set
the initial window position.
The patch from b316c3a says:
"Determine gravity from initial position. Do not change later as
it will cause the window to move uncontrollably"
Since it did not elaborate on the situation, we can only assume
that it was caused by another bug in Qt at the time or perhaps
a broken WM. From [1]:
"Applications are free to change their win_gravity setting at any
time. If an Application changes its win_gravity then the Window Manager
should adjust the reference point, so that the client window will
not move as the result."
Tested on Ubuntu/Unity, KDE/KWin, Gnome-shell/Mutter, Lubuntu/OpenBox.
Works as expected everywhere expect Unity. Unity seems to ignore
XCB_GRAVITY_STATIC and treats it as XCB_GRAVITY_NORTH_WEST, which means
that setGeometry/setFramePosition produce the same placement on this WM
(the behavior was the same also before this patch).
P.S. Also renamed xRect -> rect, which was a leftover from
ae5f2a6672
With this change we can un-blacklist QWidget save/restore geometry
auto tests.
[1] https://specifications.freedesktop.org/wm-spec/latest/ar01s09.html
Task-number: QTBUG-66708
Change-Id: I381eef5d34dddb04de16a897ce5540b9c430b216
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Where possible. Sometimes the replacement is QTRY_COMPARE instead.
Also don't use QTestEventLoop directly when it can also be replaced with
QSignalSpy use.
Remove the TimerHelper class, since its uses can be done with QSignalSpy (and a
lambda when remainingTime is checked). Although checking static single-shot
timers still needs a target object, so use a stripped down version in those
tests.
remainingTimeDuringActivation() was not actually testing the repeating case, but
single-shot case twice, so fix that. In the repeating case the remaining time is
exactly 20 ms on my machine, but QEMU emulation seems to be slow enough for time
to advance before the lambda is executed, so relax the conditions.
Task-number: QTBUG-63992
Change-Id: Iae92ff7862a13d36e695eec63b54403ec872f2b4
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: I86640b22c9e7a258965805a661e1e8c3ead8d012
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: Ia7fda4c42d4aeaecd4485d18383cf46bf6af63d1
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
QWidget::restoreGeometry() is calling QWidget::move() with restoredFrameGeometry,
which internally calls setGeometry() and sets positionPolicy = QWindowPrivate::WindowFrameExclusive,
which is invalid: restoredFrameGeometry is WindowFrameInclusive geometry.
QPA plugins rely on correctly set policies when interpreting x,y. QWidget::move()
was not designed for this AFAICT, so making it to accept frame geometry is
no-op. It is widely used legacy code, changing it could cause regressions.
Save/restore API was introduced in Qt 4.2, at that time we did not have APIs
like QWindow::setFramePosition(), so its unclear why geometry() was not stored
instead. The documentation also is somewhat unclear:
"[..] save the geometry when the window closes [..]"
Frame or client geometry? It does not specify. And from the code we see
that frame geometry was passed as client geometry, not making the original
intention clearer. Besides that, restoreGeometry() is full of other undocumented
assumptions where to place windows and when to fail (fortunately its easy
to write your own save/restore logic). Added a Qt 6 note in the source code.
What this patch changes:
Now we store geometry() in saveGeometry() and use that value in restoreGeometry()
by setGeometry(). This does not cause any behavior difference in window
positioning (tst_QWidget::saveRestoreGeometry still works). Geometry restored
from data saved with earlier versions of saveGeometry() might be positioned at:
x + leftMargin, y + topMargin.
This patch makes tst_QWidget::saveRestoreGeometry to always fail instead
of being flaky. Blacklisting for XCB instead of selected distros.
Also enabled excluded code paths for XCB on tst_QDockWidget::restoreDockWidget().
It does not seem to be flaky, maybe it was in 2015, but lot of things have changed
since then.
Task-number: QTBUG-66708
Change-Id: Ic86a6fd091e2c71b7550b2f476386da704253cd4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as specified in the documentation. This was a regression from Qt4
and can cause mouse cursor flickering durig dragging on e.g. custom
widget where some areas of the widget do not accept drag-and-drop.
Task-number: QTBUG-67155
Change-Id: Iaa6f9407181931ed8e3d6a8fec13fd59d3c8625d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
