With the qrcFiles entry in the deployment JSON for Android, it can now
pass this on to qmlimportscanner for scanning the qrc files for the
available imports. This enables qmake to populate the qrc files it has
referenced in the project, be it generated by qmake or added by the
user.
Task-number: QTBUG-55259
Change-Id: Ic512ce6f24508b3ea09ebdd07ac4446debfd9155
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
With logging enabled, all the output will slow down
execution and fill up your hard disc in about a day.
Task-number: QTBUG-79050
Change-Id: I5dcac2f349f7dbe471a5e6dd7006b89d312aeeaf
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
They were tucked away in the back-end of the isTimeZoneIdAvailable()
test, but a separate isValidId() test had been added more recently,
which made some (arguably all) of them redundant. Reworked this test
in the process, so that the QSKIP() happens in _data() once instead of
in the test that's never run because there are no data rows.
Change-Id: Icaa6227ace9a1aa944d085691cdcfb3adf4a51dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFontDatabase::systemFont(FixedFont) determines the font for inline code and
code blocks in a markdown document. Now we change the size of that font to the
same size as QTextDocument::defaultFont() so that the user has the ability to
customize the font size in each document instead of only system-wide.
Change-Id: Ief7367336f7613e88695dbb08bcb7e9f50db8961
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
In file included from ../../include/QtCore/qlist.h:1,
from ../../include/QtCore/../../../qtbase_dev_de_verdad/src/corelib/kernel/qobject.h:49,
from ../../include/QtCore/qobject.h:1,
from ../../include/QtCore/../../../qtbase_dev_de_verdad/src/corelib/kernel/qcoreapplication.h:46,
from ../../include/QtCore/qcoreapplication.h:1,
from /src/widgets/kernel/../../gui/kernel/../../corelib/global/qt_pch.h:66,
from /src/widgets/kernel/../../gui/kernel/qt_gui_pch.h:48,
from /src/widgets/kernel/qt_widgets_pch.h:48:
../../include/QtCore/../../../qtbase_dev_de_verdad/src/corelib/tools/qlist.h: In instantiation of ‘void QList<T>::node_construct(QList<T>::Node*, const T&) [with T = QTableWidgetSelectionRange]’:
../../include/QtCore/../../../qtbase_dev_de_verdad/src/corelib/tools/qlist.h:614:13: required from ‘void QList<T>::append(const T&) [with T = QTableWidgetSelectionRange]’
/src/widgets/itemviews/qtablewidget.cpp:2416:71: required from here
../../include/QtCore/../../../qtbase_dev_de_verdad/src/corelib/tools/qlist.h:471:35: warning: implicitly-declared ‘constexpr QTableWidgetSelectionRange& QTableWidgetSelectionRange::operator=(const QTableWidgetSelectionRange&)’ is deprecated [-Wdeprecated-copy]
471 | else *reinterpret_cast<T*>(n) = t;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from /src/widgets/itemviews/qtablewidget.cpp:40:
/src/widgets/itemviews/qtablewidget.h:52:24: note: because ‘QTableWidgetSelectionRange’ has user-provided ‘QTableWidgetSelectionRange::QTableWidgetSelectionRange(const QTableWidgetSelectionRange&)’
52 | class Q_WIDGETS_EXPORT QTableWidgetSelectionRange
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: Iad959315ad374ef288f5fffd15d6876cb63bce8e
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 127ed7e6e0)
I see no reason why this would make sense to look for plugins in the current
directory. And when there are plugins there, it may actually be wrong
Change-Id: I5f5aa168021fedddafce90effde0d5762cd0c4c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The linker must not throw away the lto.o file. We now instruct the
linker to create a non-temporary lto.o, dependent on the target name.
In order to do that we introduce a new mkspec variable
QMAKE_LFLAGS_LTCG_SEPARATE_DEBUG_INFO. This variable can contain
single-$ variable references that get evaluated when loading ltcg.prf.
Fixes: QTBUG-72846
Change-Id: I0ea882628d63e5406ba0ee68c7435af597364b0f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When a fixed size the window is moved to another screen
by QPlatformWindow::initialGeometry(), the size constraints
would be incorrectly scaled using the initial screen in the handling of
WM_GETMINMAXINFO.
To fix this, pass the resulting screen out of QPlatformWindow::initialGeometry()
and use it during the window creation phase.
Fixes: QTBUG-77307
Change-Id: I149a2a65e816da841a32abc14a495925bf9cc6f6
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Obtain the client area and output frame and position relative to the
parent window.
Task-number: QTBUG-79861
Change-Id: I193dfbcdec7e27d32a70ada08ba271260eedc969
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Static text controls should not return a ValueProvider. Otherwise,
Narrator reads out static texts and announces whether they are
editable or not, which is confusing to users. It should only read
out the text itself.
Fixes: QTBUG-79613
Change-Id: I080cd6a5db10f6f673b50c40ac7d87c3737d9b55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If an item was updated while the display was in sleep mode then when the
display came back from sleep it would not be updated. This change detects
when the display returns from sleep and repaints the windows to ensure
the updated items are presented.
Fixes: QTBUG-76307
Change-Id: I5fff5209e8a5c359d06ba1df61944690e9475ea6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It was converted over ARGB32PM, when it should have been directly
converted to not lose accuracy, instead there was an unnecessary direct
ARGB32->RGB30 conversion, which was converted to the necessary type.
This also improves the selection of conversion over ARGB32PM or RGBA64PM
for ARGB32 and RGBA8888 by using 32-bit conversion when alpha is not
relevant.
Change-Id: I5990d8a23b2909d3910d8c1213fa46477742b052
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Since the test was fatuous for i == 0, iterate from i = 1, instead.
Change-Id: I9b9c1b7b10639aefdd74f48051d592da4f84dc85
Reviewed-by: Jesus Fernandez <jsfdez@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Document QDateTime's methods by reference to QDate and QTime, to avoid repetition.
Use consistent descriptions between toString() and fromString(), in each case.
Document the truth: various things were simply wrong, in at least some copies.
Change-Id: Ie80017250cd470f65733f96d182ed7d043694f0e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
In iOS 13.0 we can handle UITextInteraction as normal, but in lower
versions it is not available to utilize at compile time. So we have to
check for the other types instead and return if it is not one of those.
Change-Id: Icbc5558e677ed40c03f30a174e2d79b87f489f68
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's not guaranteed that QPlatformScreen::screen should always return a
valid pointer. Furthermore, you can run into this situation with, for
example, two screens setup.
Task-number: QTBUG-53022
Change-Id: Ic23bb2c30b1245f98a793a44cc5e0b39f9afac4b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When building an application for Android on Windows it is possible that
the command line will be too long when doing the link step. So the code
for generating a response file is moved to MakefileGenerator so it can
be used by the other generators easily. The same variables used by
MinGW can be used elsewhere then.
Fixes: QTBUG-71940
Change-Id: I6c331d12e9541a90a4a95e0154d0ea1c056489bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Rather than tweaking the parser to cover every eventuality with corner
case lines that could cause incorrect header files to be created then
the means to suspend/resume the processing of a file is added.
This enables us to have it skip over the template line that is causing
a QList header to be created as part of the QtGui headers. This patch
includes the fix to solve this in addition.
Fixes: QTBUG-68129
Change-Id: I751646c4b20a4434347c149ae5e6dcb6e7618853
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The code doesn't convert anything that might be a separator on other
platforms (most notably, '\') to '/', it only replaces platform-native
separators (i.e. '\' if running on Windows) with '/'.
Change-Id: I2e241b88b8bd271dfa5d7db61402fe8ef9a6bb6f
Fixes: QTBUG-79736
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
In single selection mode, the current selection toggled when the user
pressed the left mouse + Ctrl key and then moved the mouse over the
item. This was introduced with 28a21d98ef
which added the possibility to deselect an item in single selection
mode.
Fix it by adding a check if the event was a mouse move event and use the
old codepath for it.
Fixes: QTBUG-77353
Change-Id: Id845ada302c92646885dfd966721b00d940f1260
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Having a platform with Texas Instruments's ADS7846 touch screen controller (NXP
i.MX6 DualLite SoC) and a LOGIC Technologies Inc. LTTD800x480 L2RT 7" (800x480
pixels) TFT LCD panel attached to it (resistive touch) using Linux v5.2.17 and
libinput-1.12.6 a single one finger touch starts with a LIBINPUT_EVENT_TOUCH_
DOWN directly followed by a LIBINPUT_EVENT_TOUCH_MOTION both having the same
touch position.
Now Qt's code for touch input processing compressed both into one touch point
with state Qt::TouchPointStationary which resulted in QGuiApplicationPrivate::
processTouchEvent() seeing no touch points with state Qt::TouchPointPressed
anymore. As a consequence processTouchEvent()'s local container windowsNeeding-
Events stayed empty and the whole touch frame was skipped.
Fix this by still compressing into one touch point, but keeping its state as
Qt::TouchPointPressed.
Fixes: QTBUG-79212
Change-Id: Ia571d79ec5c1d6143e923ed69b378503b53e5992
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The controls were correctly grayed out when the entire window was not
active, but inactive subwindows showed their controls in color, and only
the titlebar had a slightly paler gradient to indicate that they are not
active. MDI is not a concept on macOS and there is no clear style guide
for how such windows are supposed to behave, but the look of the
inactive titlebar before this change is too similar to the active state
for it to be useful.
This change restores the pre-5.11 state, prior to the removal of HITheme
based styling in 8633e1a7b4.
Change-Id: If009bf085a87fe2610d888636348dc8b13a93ec1
Fixes: QTBUG-79648
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: Ia5d208ace5086e8e92f95f859383773894a18768
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit dcbe25bbbb)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Per earlier discussions we bump the deployment target for LTS releases
and follow up by requiring the latest SDK available for building.
As layer backed views and dark mode is a lot more stable these days in
Qt and on macOS in general we no longer support the option to build with
the 10.13 SDK. A workaround in case this functionality is still needed
is to explicitly set the QMAKE_MAC_SDK_VERSION qmake variable, which
will tell the linker to write that version into the MachO header of
the executable, which will then be read by AppKit when determining
which features to opt in to.
Change-Id: Ied4f6d75b710505a5c440c990b82567bea780db6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
You can save a "skeletal" document with list items to fill in later,
the same as you can do in HTML or ODF format. Reading them back via
QTextDocument::fromMarkdown() isn't always perfect though.
Fixes: QTBUG-79217
Change-Id: Iacdb3e6792250ebdead05f314c9e3d00546eeb9f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The markdown parser generates empty lists in some cases when a character
that can be used as a bullet is found on a line by itself.
cbEnterBlock() and cbLeaveBlock() are called symmetrically in such cases.
QStack::pop() on an empty stack triggers an assert, so push and pop need
to be done symmetrically too. But it's difficult to actually create the
list as soon as the MD_BLOCK_UL or MD_BLOCK_OL callback occurs, without
breaking the case fixed in 7224d0e427 (and
probably other cases). That's because QTextCursor::insertList() creates
a list item at the same time as it creates the list itself, and also
inherits block formatting from the previous block. We now insert empty
lists with empty items whenever the need for that is detected though,
and there's a failsafe to prevent popping in case something still goes
wrong with that logic. We aren't strict about reproducing the original
markdown when regenerating it via toMarkdown(), but it's getting closer.
Fixes: QTBUG-78870
Change-Id: Ided194ce7aec2710c60dbac42761ee4169ed9b78
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
Introduce resources_functions.prf with the test function
qtFlattenResources which ensures that RESOURCES has a flat structure,
e.g. only contains *.qrc entries.
This can be called by other .prf files like qtquickcompiler.prf
without disturbing the ability to extend RESOURCES in other .prf files.
Task-number: QTBUG-79672
Change-Id: I43246e40f5ea52a9d9c917a1bd781aeeb1304acc
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
If a font with only a family set is resolved with one that has been setup
with setFamilies() then the family needs to be prepended to the families
list after resolving. This is so that the font still prefers the one set
as just a family with no famillies set.
This also amends the QFontDialog test to account for this too.
[ChangeLog][QtGui][Text] Resolving a font that just has a family set
with families set will prepend the family to the families so that it
is still the first preference for the font.
Task-number: QTBUG-46322
Change-Id: Icc4005732f95b2b4c684e592b06b31e133270e44
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The signal QProcess::error() was deprecated in Qt5.6 but not annotated
with QT_DEPRECATED_X.
Change-Id: I9dd11c9b8019a0554cb82d6acb6b7e0a01c78123
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Change a1ea498789 did replace different pkg-config calls for
-L, -l arguments to one. Anyhow, it also removed the eval() call that
ensured that the return string was split by whitespace, meaning that
paths couldn't resolve anymore properly if multiple arguments were
returned.
Fixes: QTBUG-79668
Change-Id: I4091fea6891ef79836e05f8e87ffa9d69863a8f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The CROSS_COMPILE variable wasn't picked up by the linux-g++ mkspec.
Now it's possible to cross-build Qt on FreeBSD to Linux, for example.
Fixes: QTBUG-79255
Change-Id: Ib1cd8ed3d5ef0af42f2d47af8f6d2c2ff5356adc
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use QT_CONFIG consistently and enclose
sslConfigurationImplementation(), setSslConfigurationImplementation()
and ignoreSslErrorsImplementation() within QT_CONFIG as well.
This enables a build of Qt for Python with -no-feature-ssl.
Change-Id: Ia699293ab73a5dc86d8dcf95aa5f6369334d36a2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It makes -DQT_DISABLE_DEPRECATED_BEFORE=0x050d00 (in an application)
trigger a binary incompatible change and crash.
Change-Id: I9b9783d134821697180dc3fd8f2f69a51ddb7ac6
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Based on https://wiki.qt.io/Writing_Unit_Tests. Some of the
guidelines will be added to the documentation of a particular
class, function, or macro.
Task-number: QTBUG-18368
Task-number: QTBUG-63987
Change-Id: Ied267edc71e370a07f5124ba05432799f595dda6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
From https://wiki.qt.io/Writing_Unit_Tests
Task-number: QTBUG-63987
Change-Id: I7229ac0712d1207c0c9ebdac868c33bb35dcb0f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Make it clear that the functions will return false if the socket was already
disconnected.
Fix the QLocalSocket example snippet to handle that case correctly by checking
state() before attempting to wait.
Fixes: QTBUG-50711
Change-Id: I4ab4062446a0041a35a3a1d65a19202ffa103298
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This fixes issue with dialogs when the canvas is not at 0,0 in the
browser window
Change-Id: I14f6754746e064921635d6b3af3353bf3620ac44
Fixes: QTBUG-79160
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
