QComboBox::currentIndexChanged(QString) was deprecated due to the fact
that there is a currentTextChanged(QString) signal but this signal is
not equivalent to the other since it's also emitted when the lineedit
text changes.
Therefore revert the deprecation of this signal.
Fixes: QTBUG-76890
Change-Id: Ia314116a5ac4e43e60383da9e729e24ffb3e8b30
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
A double left brace in a link command was causing qdoc to fail for
the remainder of the qdoc comment. This update just removes one of
the left braces.
Change-Id: Ie4fc0122e0799955b7804c2b6f61393af01747c7
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
This patch amends fe63900dc9
The previous value of 400ms was a random and seemingly harmless choice.
It turns out that 400ms is a bit too long and interferes with x11 async
behavior tweaks in the VirtualBox source code.
The original aim of specifying a concrete delay was to fix the
nondeterministic behavior of the pre-existing code and to avoid flickering
on KWin caused by waiting too little. This patch changes 400ms -> 100ms,
which seems to work better in practice.
Fixes: QTBUG-76742
Change-Id: Ia8168216819ac41d0124622c9472a98a1877262f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When adding the static dependencies for a module, they should be
added to the debug|release configuration as appropriate, otherwise
it ends up adding the debug version of the libraries to the release
configuration as well as the release version of the libraries.
Implementation wise, that means we have to use generator expressions
of the form $<$<CONFIG:Configuration>:${dependencies}>, because
INTERFACE_LINK_LIBRARIES does not have a
INTERFACE_LINK_LIBRARIES_<CONFIG> equivalent that can be set per
configuration.
Note that the condition part of the generator expression can not
explicitly check for Debug or for Release, because a user can
configure their application without specifying CMAKE_BUILD_TYPE,
which means that both Debug and Relase conditions would fail.
So the actual condition has to be isDebug or isNotDebug.
The same approach is used for INTERFACE_LINK_OPTIONS.
For debug_and_release builds we use the isDebug and isNotDebug
conditions for the generator expressions.
For singular builds (only release or only debug), we set the
generator expression condition to "1" aka always true.
This means that the Qt libraries and link options will always be used
regardless of the configuration with which the CMake application
is configured with.
Fixes: QTBUG-76337
Task-number: QTBUG-38913
Change-Id: I5369d8ba083359a4a92253dbd1dabe9d1efa34db
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The absolute paths of certain static dependencies can have spaces in
them. The _qt5_$${CMAKE_MODULE_NAME}_process_prl_file fails to handle
this, and simply replaces all spaces with semicolons, which obviously
breaks the list of dependencies, and a consuming application fails to
link with a message like:
LINK : fatal error LNK1181: cannot open input file 'C:\Program.obj'
This change partially restores the functionality that was added in
102e1822ff specifically the part
that changes qmake to export an additional variable
QMAKE_PRL_LIBS_FOR_CMAKE. This variable has the same content as
QMAKE_PRL_LIBS except it uses a semicolon as a separator, so that
CMake can correctly parse the separate lib entries.
This is much cleaner than trying to parse the original QMAKE_PRL_LIBS
variable with a complicated regular expression.
Amends eda28621f6.
Task-number: QTBUG-38913
Change-Id: I1d18fb779606505bc92320d8ce13232c7022e212
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The paths to the libraries and prl files should have the "_debug"
suffix for the debug configuration. This prefix is added to the TARGET
when by qt_module.prf when doing a debug build, but not during a
debug_and_release build.
Make sure to strip the _debug suffix if it's there, and re-add it later
always, to be consistent in both debug_and_release builds and in
debug builds.
Amends a12b6e7bf6.
Task-number: QTBUG-38913
Task-number: QTBUG-75520
Change-Id: I29e88f2b991e2be06b23652d64edc768fa35a5ae
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The QNetworkReply implementation for Qt for WebAssembly now supports
usage of the QNetworkAccessManager::sendCustomRequest, making it
possible to send requests with custom verbs.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fixed
QNetworkAccessManager::sendCustomRequest for Qt For WebAssembly.
Fixes: QTBUG-76775
Change-Id: I9394ffef110fce4ed2c877893631bedc7631f71e
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This seems to be a common use case, and to be expected from pastes
of MSWord documents.
Change-Id: I5849d7f51408e76f15a0b03c2118649f118af1d6
Fixes: QTBUG-66794
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Because it is. It's just QCoreApplication::postEvent(), which is thread-safe.
It also _has_ to be, because we recommend to use deleteLater() to delete
QObjects that live in another thread:
Quoting the ~QObject() docs:
> Warning: Deleting a QObject while pending events are waiting to be delivered
> can cause a crash. You must not delete the QObject directly if it exists in
> a different thread than the one currently executing. Use deleteLater()
> instead, which will cause the event loop to delete the object after all
> pending events have been delivered to it.
If deleteLater() is not thread-safe, it cannot be used for one of its intended
purposes.
Change-Id: I333d506b42bdfcdff00fe6cefa234c21865625a6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We stopped storing the patch release number of Qt in the plugin metadata
in commit 7bd79b3cff (5.13), to make it
simpler to parse the validity of plugins before decoding the CBOR
payload.
Fixes: QTBUG-76855
Change-Id: I6aed4df6a12e43c3ac8efffd15adbbf83e928866
Reviewed-by: Liang Qi <liang.qi@qt.io>
This is the most flaky-pass test currently.
It fails the first time it is run on MacOS_10_12, but
succeeds all the following times.
This happens extremely often, so disable it until the issue
is resolved.
Task-number: QTBUG-76566
Change-Id: I94359eceb91c3b958930424e6c8b5957fb3f1252
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QWidgetPrivate::updateIsTranslucent sets the surface format of the
window with the alpha based on the translucency attribute, so we need
to call this function when the attribute value changes. The test can
confirm that the window's requested surface format has changed, we
can't rely on what is actually set, and don't have to rely on
hard-coded values like 8bit alpha.
While WA_NoSystemBackground needs to be set for WA_TranslucentBackground
to have an effect, we can't clear the attribute when clearing
translucency (as it might have been set explicitly).
Change-Id: I238d6930b7e0488397467a4e035b5f530566a1ff
Fixes: QTBUG-60822
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When calling waitFor{ReadyRead,Disconnected} it will wait for data but
if the data is already received and the read notification has been
queued (and there's no more data coming in) it will return false.
By checking if a read notification has been queued and then handling
this we can easily take care of this scenario.
Fixes some flaky tests which missed the read data in waitForDisconnect
and similar.
Fixes: QTBUG-38385
Change-Id: Ic05d59883c1175783e56ff1822b6636c35aec874
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If we end up in the connected state then we should pass on any
remaining data immediately instead of waiting until the next time we get
a read notification.
The other `case`s in the switch might be able to do something similar,
but I don't want to introduce that logic now in case it breaks something
else, the Connected branch is small and simple to deal with.
Should severely reduce flakiness with socks proxy in CI under pressure.
Task-number: QTBUG-76367
Change-Id: I0965d4c62a29a25ce6b8dd60862a464279aef0b4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Like in Qt code itself we should use forward slashes consistently.
This enables the vulkan test to run on Linux for MinGW
cross-compilation.
Task-number: QTBUG-76660
Change-Id: Ifc6dec11bac3c3769d5d06e49da529f66f7b5843
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Otherwise, the math will fail badly. Documentation improved to reflect
reality.
Change-Id: I9e3d261ad9bf41cfb2b6fffd159085cd38e3c388
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
No need to check QSysInfo, just use qFromBigEndian. On big-endian
systems, it does the memcpy for us.
Change-Id: I1004b4b819774c4c9296fffd158fe3aa5ff0a287
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation talks about them. They're just iterators.
Fixes: QTBUG-75123
Change-Id: I194d3f37471a49788a7bfffd15956064b42383b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The other containers probably don't handle as well, so I just documented
the ones that I know how they work.
Fixes: QTBUG-75470
Change-Id: I95ecabe2f50e450c991afffd159a0483aac35a79
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Well, yeah, it technically does...
qcborstream.h:245:15: warning: declaration shadows a typedef in the global namespace [-Wshadow]
/usr/include/libkern/OSTypes.h:36:26: note: previous declaration is here
Fixes: QTBUG-75825
Change-Id: Idce141629dd34287808bfffd159ee2a75428bf12
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
qmetatype_p.h:111:412: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
Change-Id: Iac6ae11e29bd4169bae9fffd15a117d576a95adb
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The make executable that comes with Android's NDK tries to execute the
shell-builtin "move" as a stand-alone executable unless you trick it
to execute "move" through the shell by surrounding one argument with
double quotes or such.
Force the execution of "move" through shell by altering QMAKE_MOVE for
Android on Windows.
Change-Id: I5b1490ad0606960dbd06a4cafb0b0b983e265159
Fixes: QTBUG-35713
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Although QPlatformInputContext::reset() documentation says that reset()
should not send any QInputMethodEvents, implementations on Windows,
macOS and iOS do send a QInputMethodEvent which clears preedit text in
their reimplementations of reset(). Text editing controls depend on that
and may not clear preedit text if such event is not sent.
Change-Id: I75ab73946cb06e93e5fc5e98e0cc503a7de5c2e0
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
There is no need to tell the editor to stop composing if user taps so
close to the cursor position that the cursor will not move anyway. If we
do stop composing in such case, then since there will be no cursor
position change notification, we will never start composing again
(before the cursor is actually moved), and the current composing region
will remain being displayed as normal text instead of being displayed as
composing text.
Change-Id: I4ebe6442e1ba8c365d6754c1a8487235d177c732
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Fixes auto-capitalization in AnySoftKeyboard. It was typing the whole
first word in a sentence in upper case.
Change-Id: I605a1aee39d432a3474c0bf706445d354562285f
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
7a7c722782 caused a regresssion in some
cases.
Change-Id: I1089a79534d811b195de663ff664d9ba5a6ac6c5
Fixes: QTBUG-74110
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On Windows buildToolsVersion 29.0.0 have problems, therefore,
it's better to use a version that we know it works on all platofrms.
Change-Id: I25cdea4b8101bfe5f022025fcd7cc4cbf358fa03
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
not to resolve merge conflicts on every 5.13->dev merge.
Change-Id: Id41a7efff52148fe46bedcde828646694fd1764d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This fixes the usability issue of a modal dialog showing up behind a
splash screen, not visible to the user, but blocking user input and the
application startup sequence until discarded.
[ChangeLog][QtWidgets][QSlashScreen] On macOS, lower the splash screen
when a modal dialog is shown to make sure the user sees the dialog.
Change-Id: Ibae768f76909d930cb25dcf5cee31edc5f15c29a
Fixes: QTBUG-49576
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't go through the doScaledRead path (i.e. calling read_image_scaled)
when reading an image that the target size is the image of the file we
are opening.
This makes the loading of the file much faster while keeping the output
correct.
[ChangeLog][QtGui][QImage] Improve loading time when loading png files
that have the same size as the target.
Change-Id: I2a33c49fe1ce52ec296c2175ee542b5bcdec2c4b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When using a http proxy (and presumably other proxies) we might have
failed/aborted (aka "finished") the request and _then_ receive a
"proxy authentication required" message from the proxy. In this case
there is no spdy/http2 reply in the queue, so asserting is wrong.
Change-Id: Id9b76b580299f6a6cd6efad62d6aaf63183816fb
Fixes: QTBUG-76426
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In some scenarios with QNAM we call socket->close, leading to a flush,
leading to an error, leading to another error emission... To work
around this scenario we stop trying to close the socket if the network
channel is already closing.
Change-Id: Id15504f476484ce61f11ba83a5755ceb5f581f9b
Fixes: QTBUG-76567
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Inspired by:
https://codereview.appspot.com/6812076/
Resizing a window larger results in the newly exposed region being invalidated
but the old region is treated as valid.
This can result in the old region no longer updating.
Was added to D3D9.
Improving a fix from Filippo Cucchetto:
https://codereview.qt-project.org/c/qt/qtbase/+/195336
and pushing to D3D11.
ifndef protects against compilation error for WinRT.
Invalidate() should be used only for desktop apps.
Task-number: QTBUG-46074
Change-Id: Ie24b8dffe130b970f2362337ac4f9bee666f82b2
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The directory must be prepended by = to denote the sysroot.
This amends commit 797f686e.
Change-Id: Ib85c0abc58fce3504ecccef0e223b2618ac9149a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We must use the same two-level replacements like for .prl files.
This amends commit d5071a40.
Change-Id: Iea065d01dee61cf2d1ff78640d045c3c76db9ac8
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Converts from OpenGL formats to Vulkan formats.
There are commented out lines for the formats in QOpenGLTexture::TextureFormat
for which it was hard to find an unambiguous mapping to vkFormat.
Task-number: QTBUG-75108
Change-Id: I06a7fd8df7d98cef314410ffd79ca9cff6599357
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
(cherry picked from commit b21b07877a)
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
