This adds detection for: VAES, GFNI, AVX512VBMI2, AVX512VNNI,
AVX512BITALG, AVX512VPOPCNTDQ, AVX512_4NNIW, AVX512_4FMAPS. These
features were found in the "Intel® Architecture Instruction Set
Extensions and Future Features" manual, revision 30. This commit also
adds support for RDPID (already in the main manual) and the Control-flow
Enforcement Technology, which appears in a separate Intel paper.
This new support was done by adding a new generator script so we don't
have to maintain two tables in sync, one in qsimd.cpp with the feature
names, and the other in qsimd_p.h.
Since we now need a lot more bits, it's no longer worth keeping the two
halves of the qt_cpu_features variable mostly similar to the main two
CPUID results. This commit goes back to keeping things in order, like we
used to prior to commit 6a8251a89b (Qt 5.6)
At the time of this commit, GCC 8 has macros for AVX512VPOPCNTDQ,
AVX512_4NNIW, AVX512_4FMAPS, AVX512VBMI2 and GFNI.
Change-Id: I938b024e38bf4aac9154fffd14f7afae50faaa96
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We had that as a concession for early toolchains that failed to include
the necessary libraries. They must now be up-to-date.
Change-Id: I938b024e38bf4aac9154fffd14f7a630ef160cd5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since we bind to QHostAddress::Any, the incoming packets are actually
IPv4-mapped IPv6 addresses and the operator== strict comparison was
failing. Instead, use isEqual(), which defaults to TolerantComparison.
Change-Id: Ic38ec929fc3f4bb795dafffd150ac6b3a0a7e3b2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In recent macOS versions the descriptor created from the function
CTFontManagerCreateFontDescriptorFromData() will contain the
NSCTFontFileURLAttribute with a value such as:
file://iNmEmOrYcGfOnT_0x101d3c3a0#postscript-name=New
Which means we can't use the presence of the kCTFontURLAttribute to
determine that we're dealing with a file font. Instead we check for
our custom kQtFontDataAttribute first, which is only set for memory
fonts.
Task-number: QTBUG-68044
Change-Id: Ie87d06b5a9e0e251305200b717f18ef68ccc6abc
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
qdialogbuttonbox.cpp:862:14: error: comparison of two values with different enumeration types in switch statement
('QDialogButtonBox::ButtonRole' and 'QPlatformDialogHelper::ButtonRole') [-Wenum-compare-switch]
Change-Id: I3840d727dee443318644fffd1529350b81678712
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Specifies the flags value for the screen_context_create call allowing
the Qt application to take on additional screen capabilities via the
Qt screen context.
Change-Id: Ic7aa478227e64afe2d1d7d04ec58c11ad68b9f22
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Instead of retrieving screen events itself, the screen event thread
now turns screen event notification into a Qt signal. In response to
the signal, the GUI thread processes screen events. Eliminates the
need to coordinate access to a screen event queue. Also prepares the
way for getting rid of the screen event thread. This could be done if
the QNX event dispatcher were switched from poll to MsgReceive
(dispatch).
Change-Id: If5892466d04d67f00828fddaea38b20da5fb18a3
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
The QKeyEvent::key values were significantly different on QNX
and some QKeyEvent::text values were also different/missing.
Also makes it possible to enter numbers via the numeric keypad.
Change-Id: Ifcf6284b99a893a87974d37ec6d6976f88241e61
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Dan Cape <dcape@qnx.com>
The formatting of the output from QSslCertificate::toText has
changed slightly from before, so it no longer matches the test's
data.
From what I can tell we just do a manual sanity check and create
a new file with the new output and then augment the test.
Task-number: QTBUG-67463
Change-Id: I751e5a3f9a28015f97c895cea47384704fd68e38
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We were using the wrong free function in a path which was hit in an
edge case (PKCS#12 certificate without a private key attached).
Change-Id: I5335b5dea7a926b242bed0fd9b989b681a5828d8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The added test case is the binary JSON equivalent of
{"a":{"š":null}}
with two modifications. First, the length of the string "š" has been corrupted
to 0xFFFFFF00. Second and more import, the Base::size field of the inner object
has been reset to 0.
On its own the first modification would normally trigger a validation error.
However, due to the second modification the Value::usedStorage for the inner
object evaluates to 0, completely disabling all further validation of the
object's contents.
Attempting to convert this binary JSON into standard JSON will lead to the JSON
writer trying to construct a QString of length 0xFFFFFF00.
Fixed by validating also objects with usedStorage == 0.
Task-number: QTBUG-61969
Change-Id: I5e59383674dec9be89361759572c0d91d4e16e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The added test case is a binary JSON file describing an array which contains
itself. This file passes validation even though attempting to convert it to
plain JSON leads to an infinite loop. Fixed by rejecting it in validation.
Task-number: QTBUG-61969
Change-Id: Ib4472e9777d09840c30c384b24294e4744b02045
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This method takes a pointer+size pair, but begins reading through the pointer
without first checking the size parameter. Fixed by checking the size parameter.
A new test case is added with an empty binary json file. Although the test does
not fail under normal conditions, the problem can be detected using valgrind or
AddressSanitizer.
Task-number: QTBUG-61969
Change-Id: Ie91cc9a56dbc3c676472c614d4e633d7721b8481
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the application closes, we should clear the cache to not run into
memory sanitizers claiming that we leak.
Change-Id: Ibf9fcda107be6b7f3ed414d7651080aa1f61a3a5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
... instead of using a hack of directly accessing QGuiApplication
members.
The current QPA API was bad for two reasons:
1) It expects platform plugin authors to know about
internals of Qt Gui, particularly that QGuiApplication
uses QGuiApplication::{mouseButtons,keyboardModifiers}
to construct QDragMoveEvent and QDropEvent events. Which
results in the second reason why this is bad.
2) Platform plugins should not directly access member
variables of QGuiApplication, just to make sure that
QDragMoveEvent and QDropEvent events contain correct state.
Platform plugins should instead use QWindowSystemInterface
to communicate with Qt Gui (which is also the solution here).
The solution is to extend QWindowSystemInterface::handle{Drag,Drop}
to require mouse/keyboard state. We already do this for
some of the other methods, so it is nothing extraordinary.
This type of interface is also _required_ to support
drag-n-drops from other processes. We can't use
QGuiApplication::{mouseButtons,keyboardModifiers} when the
drag originates from another process, instead we need to
query mouse/keyboard state from the system.
This patch fixes drag-n-drops from others processes on XCB
platform plugin.
Task-number: QTBUG-57168
Change-Id: I3f8b0d2f76e9a32ae157622fef801829d629921d
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This allow to customize easily placeholders in QLineEdit by example.
Change-Id: I2bb379164376e1d88b42d6c86c2e5b8df99fbc56
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
GCC and Clang assume that all Sandybridge (2nd generation) and newer
Intel Core™ processors have AES, which I used as a source of information
for this code. However, there are a few low-end parts that miss this
feature, like Intel Core™ i3-2350M, i3-3130M, i3-4000M.
[1] https://ark.intel.com/products/series/75025/4th-Generation-Intel-Core-i3-Processors
Task-number: QTBUG-67705
Change-Id: If90a92b041d3442fa0a4fffd1525b9afbcb6e524
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The implementation of the private function naturalCompare was removed
with 197da3d220 but the declaration was forgotten.
Change-Id: I14b44e3aeccac2c428e509f115ea93c4ba2a7c9b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The ctor of QContiguousCache and setCapacity are accepting negative
values for the capacity. While this should not be done it can happen by
accident. Therefore add Q_ASSERT to ensure a positive value.
Task-number: QTBUG-19700
Change-Id: I7458100c07c687cdeaebe86400343d79b5a6330a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When showing a condensed font with AnyStretch, we should
not apply any stretch to the font (and if a stretch is
requested, we should calculate the actual stretch based
on how much the font is already stretched or condensed).
This usually works as expected, however, when using
QFont::NoFontMerging as the style strategy, we would
scale the glyph advances by the stretch of the font
since the calculated stretch of the font engine would
be overwritten by the actual stretch. In the case where
we use font merging, this would be done for the multi
engine, so we would not get the same issue, since the
text engine gets the stretch from the actual font engine
and this still has the original, calculated stretch
set.
Note on the test: We can't use testString() for this,
since it contains a space, and the test font does not
have a glyph for this, so we will end up merging a
different font for the space, giving us a slightly
different advance.
[ChangeLog][QtGui][macOS] Fixed display of condensed fonts
when NoFontMerging is in use.
Task-number: QTBUG-63800
Change-Id: I5b05e0dbfc8ae4b5d10c621ecb0975f53fda9483
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add QPlatformMenuBar::parentWindow(). Since we call handleReparent()
every so often, it's reasonable to be able to get its value back.
While this parent window won't give us much information from
the point of view of the actual QWidget parent for the menubar,
the main reason we will need this is to check for modality blockage.
Indeed, QApplicationPrivate::tryModalHelper() only cares about the
widget's window since modality blockage is decided at the window level.
Change-Id: Ie79f483424b01e430bc9168ba82489e30d15aec6
Task-number: QTBUG-67938
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This adds the ability to specify a ZPOS property for the eglfs plane
ZPOS will allow to control the relative position between eglfs layer
and the other layers.
It is bound to using QT_QPA_EGLFS_KMS_ZPOS environment variable to determine
its value.
Change-Id: I51986ccb22a9dbaeef20165ac5feb7dbe8047373
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Following up on a review comment on commit
0a5f71c606.
Change-Id: I46924f5ad1b291039d22a3d6015d80306679ad26
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
using qt$$MODULE isn't enough if the module is composed of submodules
which need the final module's headers, because that would require two
modules having the same module .pri file.
the first thought to fix this was to just use $$lower($$TARGET), but
that breaks for testlib (QtTest). while the config file name isn't
public api, it's included by a public header, so changing it is risky.
so instead stay with the original pattern, but make it explicitly
overrideable.
Change-Id: I758c46ed403620620d577ae16866ce751271b63e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Otherwise the default cups implementation is used, that is,
asking for the password on the command line,
which is probably not what our users expect.
Change-Id: Ib563d542fee71c13ed23b1a99fbe06a7d4d4eadf
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The global monitor will be used when popup windows are visible to
catch all mouse events. But only certain kind of NSEvents has a
buttonNumber set to something useful. So we need to check for
this case before we create a QPA event.
Task-number: QTBUG-60887
Change-Id: I5631c76ae82b8bfd232642036a08b5a8a29491c7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Sometimes useful to force e.g. an exact match.
Change-Id: Ic417a518d91b579c23dea925f747955f11d4143b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Normally done through the webform, but this option is useful for
scripted running of such tests.
Also option to disable such updating alltogether, to allow runs
that will never modify the baseline suite.
Change-Id: I71cc7564453e63bda7ded2b90be01280c9dbb95a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Initialize the device earlier and enable the screen as well.
These changes are also compatible with the RCar H3.
Change-Id: I4a83dedc0eed9df181c32e60ebf3666824d2a6c6
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We began using abort() on 25d6f312ac
(5.8), which improved since we stopped using exit() with MSVC. However,
abort() with MinGW and on debug-mode MSVC's CRT calls _exit(), which
attempts to cleanly unload the DLLs, which in turn may run global
destructors.
[ChangeLog][QtCore][Important behavior changes] qFatal() no longer uses
std::abort() on Windows, as there are circumstances where global
destructors are still run after that call, leading to possible
deadlocks.
Task-number: QTBUG-34460
Change-Id: I2bec439d0e9841f58c7ffffd152200e45f1df982
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
If the pipe creation fails, we need to properly close the pipes that
were successfully created, emit the signal indicating failure and set
the state back to NotRunning.
The error string is reused from below, so there's no new translatable
string.
Task-number: QTBUG-67744
Change-Id: If90a92b041d3442fa0a4fffd1526207698f234a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Avoids using an intermediate buffer on store and simplifies the code.
Change-Id: I2dc4e735eb770f90dc99fe0f513b4df3b35ee793
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This fixes their issue #41, a potential undefined behavior.
We preserve the locally added "__ghs" clause as well as the _M_ARM_FP
clause necessary for winrt in utils.h.
[ChangeLog][Third-Party Code] double-conversion got updated to upstream
version 3.0.0.
Task-number: QTBUG-66561
Change-Id: Id79125bdeeaebb61dca2e2885d3370accce9030c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In case the user has explicitly selected a value for the
duplex mode in the print dialog before, select this one when
another printer is selected and the newly selected printer
supports it.
Otherwise, always set to the default value of the respective
device that was selected.
This way, default values that the user (or admin) has set for
a CUPS printer (or printer instance) are honored, but an explicit
user choice made in the dialog takes precedence.
Previously, the duplex values was always reset to "None"
every time the printer was changed.
Change-Id: Id9683a05b10cf7a4b842f8b6c8452e80cdc6ff91
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When the page size was not valid on the new printer, it would end up
having the wrong page size name on the new printer. What should happen
in this case is that it should set the originally set page size as a
custom page size on the printer instead.
Task-number: QTBUG-62221
Change-Id: Iaca34ae262f5d0685ca60e4ca4b38229a2283289
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
So that Qt responds correctly when window managers make geometry
changes.
Note: Older versions of screen, such as the screen from the QNX 6.6.0
4036 patch, don't produce SIZE/POSITION property events.
Change-Id: I7e1e5982a2cbd3f57d468b43869af8558c6d50e7
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Retrieving it via some other screen object can be painful especially
when there isn't a readily available screen object to use.
Change-Id: If13e808435ea6f2909d5b4c3c5c736950e00aa5a
Reviewed-by: Dan Cape <dcape@qnx.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
