It's pointless in a fuzzer and slows down execution.
Change-Id: I160d7fd761118f9eba9b98fc024aef293e021845
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When the PageDown is pressed, the current's rect cannot be
used to match the item, because we don't know the size of
the rect. Move the rect by the height of the viewport, and
then move the rect upwards until it matches the
button <= viewport's bottom of the item
Fixes: QTBUG-92583
Pick-to: 6.1
Change-Id: I210edc0e8b942984f3fc20e7752c6e1315152ea1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When changing the style of the combobox, the change will not propagate
to the internal container widget, so the changeEvent handler won't be
called. This is correct (as per QWidget::setStyle documentation).
QComboBoxPrivateContainer asks the combobox style for relevant settings,
such as the frame style, which is then used for sizing and positioning.
If the combobox's and container's settings become inconsistent, then the
combobox popup will not get the correct size and/or position.
Move some of the style-dependent changes into a separate function and
call it when the QComboBox::changeEvent handles the style change so that
both widgets have a consistent set of settings.
Add a test case that verifies that the style is asked for the relevant
setting when the style changes.
Note: QComboBox does a lot of style-dependent setup work in different
places, which is quite messy and complex. Trying to consolidate that
further breaks tests though, so this change is doing the minimum
necessary to fix the reported issue.
Pick-to: 6.1 5.15
Fixes: QTBUG-92488
Change-Id: Ia957d504b2d800add26fc0565be727b5c08a5358
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This proposal collects all the resource objects to the qt-specific
property of the static libraries. This is done to avoid littering
of other static libraries and put resource object files to the
source part of the linker line when linking the end-point
executable.
The way we link object resource libraries is changed back to the
target_link_libraries approach as we may omit using finalizers
with linkers other than ld. Users may enforce finalizers by calling
the qt6_enable_resource_objects_finalizer_mode function if need.
Refactor tests related to the static resources.
Amends ddaa7150d8
Task-number: QTBUG-93002
Change-Id: I74135e291cd82fb54d1b284b4b4a1e002b1fef98
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only use plugin finalizer mode if qt_finalize_target is called at the
end of the user project (which we can't really check, the user has to
ensure that) or when qt_finalize_target is automatically defer-called
by CMake 3.19+ (which is done by qt_add_executable).
This removes the previous behavior of using the finalizer mode if
qt_import_plugins is called. Instead the old regular mode is used
if the above preconditions are not met.
The removed behavior had ordering issues if qt_import_plugins was called
before target_link_libraries. The dependency walking would be done
before Qt dependencies were added and thus no plugins would be
linked.
Amends 6fcc272ac9
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Task-number: QTBUG-94030
Change-Id: I78702b653a35596f5581c2f4282b2336f0124e60
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's possible that Qt is built with OpenSSL and some other backend.
The ifdefs generated are not mutually exclusive anymore, as it was
in the past. So tests should rely on the actual backend they have
working at runtime.
In the process of fixing the auto-tests, modernized feature #if-ery and
some associated compilation issues.
Fixes: QTBUG-92875
Change-Id: I2be1b924d506fd36dc4e2c6c9158b5023ff87f32
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This replaces QtAndroidPrivate::runOnAndroidThread{Sync} calls.
This also now allows passing std::function<> that can return values,
and not only an std::function<void()>.
This adds some tests for this calls as well.
Fixes: QTBUG-90501
Change-Id: I138d2aae64be17347f7ff712d8a86edb49ea8350
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add NEON for RGB32 and RGBA64 writeback, and SSE2 for
RGBA64 writeback.
Change-Id: Id9ee803267a78f5bdff5beaa719e7a59c1dbb9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Useful for some HDR representations and HDR rendering.
Change-Id: If6e8a661faa3d2afdf17b6ed4d8ff5c5b2aeb30e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When adding an offset from UTC, arithmetic may overflow. Likewise
when combining a date and time (that have been offset for UTC). Also
check the return from epochMSecsToLocalTime(), as it can fail; and pay
attention to the status stored by setDateTime(), to notice when it
hits an overflow. Fixed some tests that only passed because we
neglected these checks. Extended a test to check we detect overflow in
a couple of cases close to the extremes.
Change-Id: I127a670302f94a07bb9b087b1b9c608b7c08785c
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Øystein Heskestad <oystein.heskestad@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime has long followed a convention of ignoring what it knows
about time-zone transitions before the epoch. This produces unhelpful
artefacts (such as an ahistorical spring-forward skipping the first
hour of 1970 in Europe/London, which was in permanent DST at the time)
and complicates the code. It documented that DST transitions were
ignored, but in fact ignored all transitions prior to 1970 and simply
assumed that the current time-zone properties (half a century later)
applied to all times before 1970.
This appears to be based on the fact that the MS APIs using time_t all
limit their range to after 1970. Given that we have to resort to
"other means" to deal with times after the end of time_t, when it's
only 32-bit (and after year 3000, on MS systems), we have the means in
place to handle times outside the range supported by the system APIs,
so have no need to mimic this restriction. (Those means are not as
robust as we might want, but they are less bad than assuming that the
present zone properites were always in effect prior to 1970.) On
macOS, the time_t functions only reach back to the start of 1900; it
reaches to the end of its time_t range and Linux covers the whole
range. Given this variety, the range is now auto-detected the first
time it is needed (based on some quick and dirty heuristics).
Various CET-specific tests now need adjustments in tests of times
before the introduction of time-zones (when they are in fact on LMT,
not CET). The systemZone() test of QTimeZone can now restore its
pre-zone test cases. Various comments on tests needed updates.
[ChangeLog][QtCore][QDateTime] Available time-zone information is now
used to its full extent, where previously QDateTime used LocalTime's
current standard time for all dates before 1970. Where we have
time-zone information, it is considered reliable, so we use it. This
changes the "best efforts" used for times outside the range supported
by the system APIs, in most cases giving less misleading results.
Fixes: QTBUG-80421
Change-Id: I7b1df7622dd9be244b0238ed9c08845fb5b32215
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Output object name and class in QCOMPARE(). This should help
to debug flaky QWidget tests that for example check on focusWidget().
[ChangeLog][QtTestLib] QCOMPARE() now reports QObject * values by class and objectName().
Task-number: QTBUG-64446
Change-Id: Ife04e89bba04fc78d077c8f0f07af17a17c9cf8c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QNetworkInterface reports as up and running an interface,
seemingly having a valid IP address which actually has
not IPv4/IPv6 configured at all (this is what getifaddrs
gives us).
Change-Id: I5808d5dfdbc54004a1e02b791917e9b2ba62905f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
There were two problems here: first, qHash(std::pair) must be declared
before qHashMulti that might call back to qHash(std::pair) (i.e., a pair
with one element that is also a pair). But moving the declaration above
causes the second problem: the noexcept expression can't refer to qHash
functions that aren't declared yet. So we forward-declare a constexpr
function for that result, but implement it far below.
Fixes: QTBUG-92910
Change-Id: Ia8e48103a54446509e3bfffd16767ed2e29b026c
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 37e0953613 added a to-do, but we
can actually change the type, since we've documented since Qt 5.10 that
setting a non-zero value (aside from -1) with qSetGlobalQHashSeed was
not allowed. Storing a value to be reset later is simply not supported.
Change-Id: Id2983978ad544ff79911fffd1671f7b5de284bab
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It is now possible to call qt_add_big_resources with multiple .qrc files
that are in different directories but have the same file name.
Before, this resulted in target name conflict errors.
Pick-to: 6.1
Fixes: QTBUG-93230
Change-Id: Ic3d9d6974a107163aeb7ada0b6f1fa113fb18de0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For some reason the test case was (no longer?) detected by moc
Change-Id: I20f20de76479f7d9db43fae985cefe0869a7e203
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing conversions weren't handling gamma correctly and used
an ad-hoc definition of gray instead of based on true luminance.
[ChangeLog][QtGui] RGB conversions to grayscale formats are now
gamma-corrected and produce color-space luminance values
Change-Id: I88ab870c8f5e502ddb053e6a14a75102239a26f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The check is over-arching. is_move_constructible is sufficient;
we don't have to support "ridiculous" types that are copiable but
have deleted move operations (such types are fundamentally broken).
This is in line with the Move* (legacy) named requirements.
Change-Id: Idc7116b39013501b9be39628a4e7afd35fe15530
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
To see if a certain method is supported. To be used in an upcoming patch.
Change-Id: I1a5c2f655585331820701bb54f6991b4aba38273
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qt6_add_big_resources command was dysfunctional whenever AUTOMOC was
enabled for a target.
We passed multiple object files with the --temp argument of the second
pass of rcc. We must pass exactly one. The spurious object file was the
one that's created by AUTOMOC. Turn off all of AUTOGEN for the C++
source file that's generated in the first pass of rcc.
Enable AUTOMOC for tests/auto/cmake/test_add_big_resource to cover this
situation.
Pick-to: 6.1
Fixes: QTBUG-85051
Change-Id: I6d2ce4953297db0751913456db0a4a126fe33f14
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's very likely that we'll have to run certain finalizer code for
targets other than executables.
Rename qt_finalize_executable to _qt_internal_finalize_executable so
it's internal.
Introduce a new function qt_finalize_target which will call the above
internal one when the target is an executable.
This should future proof the API so we have a hook to call code for
any user CMake project that intends to use Qt CMake API.
Change-Id: I03f6f4dcba22461351c247a20241ca7de1a59c1d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In QFileSystemModel, in some cases the hostname in a UNC path is
converted to lower case and stored in the root node's visibleChildren.
When QFileSystemModel sets the UNC path as the root path, it tries to
get the row number for the host, but it didn't convert the hostname to
lower case before getting the row number, which resulted in the host
not found in the root node's visible children. As a result, it returns
-1, an invalid row number. Change the behavior to find the node for the
host using the host name case-insensitive and then get the row number.
Fixes: QTBUG-71701
Pick-to: 5.15 6.0 6.1
Change-Id: Ib95c7b6d2bc22fd82f2789b7004b6fc82dfcb13b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
There was previously no way to compare QByteArrayView to with another
QByteArrayView case-insensitively without allocating memory.
[ChangeLog][QtCore][QByteArrayView] Added compare(), enabling case
sensitive and insensitive comparison with other QByteArrayViews.
Change-Id: I7582cc414563ddbde26da35a568421edcc649f93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allow linking all plugin initializer object libraries directly
into the final target (executable or shared library).
The finalizer mode is triggered when the project adds a call
to qt_import_plugins, as well when the project has an explicit
call to qt_finalize_executable or when it is defer called by
CMake 3.19+.
Otherwise the old non-finalizer mode is used, where each plugin
initializer object library is propagated via the usage
requirements of its associated module.
A user can explicitly opt in or out of the new mode by calling
qt_enable_import_plugins_finalizer_mode(target TRUE/FALSE)
The implementation, at configure time, recursively collects all
dependencies of the target to extract a list of used Qt modules.
From each module we extract its list of associated plugins and
their genex conditions. These genexes are used to conditionally
link the plugins and the initializers.
Renamed QT_PLUGINS property to _qt_plugins, so we can safely query the
property even on INTERFACE libraries with lower CMake versions.
QT_PLUGINS is kept for backwards compatibility with projects already
using it, but should be removed in Qt 7.
The upside of the finalizer mode is that it avoids creating link
cycles (e.g. Gui -> SvgPlugin -> Gui case) which causes CMake to
duplicate the library on the link line, slowing down link time as well
as possibly breaking link order dependencies.
The downside is that finalizer mode can't cope with generator
expressions at the moment. So if a Qt module target is wrapped in a
generator expression, it's plugins will not be detected and thus
linked.
Task-number: QTBUG-80863
Task-number: QTBUG-92933
Change-Id: Ic40c8ae5807a154ed18fcac18b25f00864c8f143
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
After commit 3966b571 the function was kinda broken already, though
this got unnoticed since it was not covered by an the auto-test.
This commit adds another test case with Windows native separators
and removes the use of QDir::fromNativeSeparators. Instead use the
original code from QDir::fromNativeSeparators to replace the backslashes.
Pick-to: 5.15 6.0 6.1
Change-Id: I190560d0e75cb8c177d63b142aa4be5b01498da2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Normally we only allow creating wrappers for texture objects. These
can then be used with a QRhiTextureRenderTarget to allow rendering into
an externally created texture.
With OpenGL (ES), there are additional, special cases, especially on
embedded. Consider EGLImages for example. An EGLImageKHR can be bound to
a renderbuffer object (glEGLImageTargetRenderbufferStorageOES), which
can then be associated with a framebuffer object to allow rendering into
the external buffer represented by the EGLImage. To implement the same
via QRhi one needs a way to create a wrapping QRhiRenderBuffer for the
native OpenGL renderbuffer object.
Here we add a createFrom() to QRhiRenderBuffer, while providing a dummy,
default implementation. The only real implementation is in the OpenGL
backend, which simply takes a renderbuffer id, without taking ownership.
Task-number: QTBUG-92116
Change-Id: I4e68e665fb35a7d7803b7780db901c8bed5740e2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Mostly for testing QLatin1String::indexOf optimizations in the next
patch but useful in general
Change-Id: I85bf76f3e1d5abb994fd12907db2f2a723a8d330
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The BASE argument of qt_add_resources now denotes the root point of the
alias of the file. Before, BASE was merely prepended to every file that
got passed to qt_add_resources.
Old behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "images/button.png")
Alias is "../shared/images/button.png", and pro2cmake generated
QT_RESOURCE_ALIAS assignments to fix this.
New behavior:
qt_add_resources(app "images"
PREFIX "/"
BASE "../shared"
FILES "../shared/images/button.png")
The alias is "images/button.png". No extra QT_RESOURCE_ALIAS assignment
is needed.
The new behavior is in effect for user projects and for Qt repositories
that define QT_USE_FIXED_QT_ADD_RESOURCE_BASE. Qt repositories will be
ported one by one to this new behavior. Then the old code path can be
removed.
Pick-to: 6.1
Task-number: QTBUG-86726
Change-Id: Ib895edd4df8e97b54badadd9a1c34408beff131f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QItemSelectionModel has the property selectedIndexes with
the notification signal selectionChanged. When a row is deleted
or inserted above the current selection, the row number of the
current selection changes and thus the return value of
selectedIndexes changes. This should trigger its notification
signal.
This signal was not emitted. This patch fixes this and
adds a unit test to verify this.
[ChangeLog][Important Behavior Changes][QtCore]
QItemSelectionModel now emits the selectionChanged signal
if only the indexes of the selected items change.
Fixes: QTBUG-93305
Change-Id: Ia5fb5ca32d658c9c0e1d7093c57cc08a966b9402
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
"Cherry-pick" of C++2b's std::to_underlying.
[ChangeLog][QtCore][QtGlobal] The qToUnderlying function has been
added, to convert an value of enumeration type to its underlying
value.
Change-Id: Ia46bd8e4496e55174171ac2f0799eacbcca02cf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Not just a compile-time one (that the macros compile and don't
raise warnings).
Change-Id: I5642bf242a6c26a33730708f3c1710237fc107a2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no reason to be storing `int` in the array data header and
then using it as a QFlags. Just store the QFlags.
Change-Id: I78f489550d74d15a560dacf338110d80a7ddfdd2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QFlags was lacking a named function for testing whether a QFlags object
contains _any_ of the bits set by a given enumerator/other QFlags.
Drive-by, add testFlags taking a QFlags, not just an object of the
enumeration; and simplify the implementation of testFlags to more
closely follow what its documentation says it does.
[ChangeLog][QtCore][QFlags] The testFlags, testAnyFlag and
testAnyFlags functions have been added.
Change-Id: Ie8688c8b0dd393d34d32bc7786cdcee3eba24d1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While at it, move tst_android under corelib/platform/android.
Change-Id: Icf91cd75cb5e04d03fe6a81d52fba52a485ca41f
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The initial approach for providing public access to native
interfaces via T::nativeInteface<I>() was based on the template
not being defined, and then having explicit instantiations of
the supported types in a source file, so that the accessors
were exported and available to the user.
This worked fine for "simple" types such as QOpenGLContext
and QOffscreenSurface, but presented a problem in the context
of classes with subclasses, such as Q{Core,Gui}Application.
To ensure that a native interface for QCoreApplication was
accessible both from QCoreApplication and its subclasses,
while at the same time preventing a native interface for
QGuiApplication to be accessible for QCoreApplication, the
nativeInterface() template function had to be declared in
each subclass. Which in turn meant specializing each native
interface once for each subclass it was available in.
This quickly became tedious to manage, and the requirements
for exposing a new native interface wasn't very clear with
all these template specializations and explicit instantiations
spread around.
To improve on this situation, while also squashing a few
other birds at the same time, we change the approach to
use type erasure. The definition of T::nativeInteface<I>()
is now inline, passing on the requested interface to a per
type (T, not I) helper function, with the interface type
flattened to a std::type_info.
The type_info requested by the user is then compared to the
available types in a single per-type (T) "switch statement",
which is a lot easier to follow for someone trying to trace
the logic of how a native interface is resolved.
We can safely rely on type_info being stable between the user
application and the Qt library as a result of exporting the
type info for each native interface, by explicitly ensuring
they have a key function. This is the same mechanism that
ensures we can safely dynamic_cast these interfaces, even
across library boundaries.
The use of a free standing templated helper function instead
of a member function in the type T, is to avoid shadowing issues,
and to not pollute the class namespace of T with the helper
function.
Since we are already changing the plumbing for how a user
resolves a native interface for a type T, we take the opportunity
to add a few extra safeguards to the machinery.
First, we add a static assert in the T::nativeInteface<I>()
definition, that ensures that only compatible interfaces,
as declared by the interface themselves, are allowed.
This ensures a compile time error when an incompatible
interface is requested, which improves on the link time
errors we had prior to this patch, and also offsets the
one downside of type erasure, namely that errors are only
caught at runtime.
Secondly, each interface meant for public consumption through
T::nativeInteface<I>() is declared with a revision, which
is checked when requesting the interface. This allows us
to bump the revision when we make breaking changes to the
interface that would have otherwise been binary incompatible.
Since the user will never see this interface due to the
revision check, they will not end up calling methods that
have been removed or renamed.
One advantage of moving to a type-erased approach for the
plumbing is that we're not longer exposing the native
interface types as part of the T::nativeInteface symbols.
This means that if we ever want to rename a native interface,
the only exported symbol that the user code relies on is
the type info. Renaming is then possible by just exporting
the type info for the old interface, but leaving it empty.
Since no class in Qt implements the old native interface,
the user will just get a nullptr back, similarly to bumping
the revision of an interface.
Change-Id: Ie50d8fb536aafe2836370caacb22afbcfaf1712a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Since we changed binding evaluation to be always eager, we notify and
evaluate all bindings as soon as any dependency changes. This includes
bindings which have been initially installed on a property, but which
were later removed.
With lazy evaluation, we would only notify those bindings and mark them
as dirty, which is unproblematic. With eager evalution, we attempt to
evaluate the binding, though. While that part is still fine, afterwards
we would attempt to write the new value into the property. However,
there is no property at that point, as the binding is not installed.
Instead of adding a check whether the propertydataptr is null, we skip
the reevaluation completely by removing the bindings observers - and
thus the cause for the binding function's reevaluation. As soon as the
binding is set, we reevaluate the function anyway, at which point we
also capture the observers again.
Task-number: QTBUG-89505
Change-Id: Ie1885ccd8be519fb96f6fde658275810b54f445a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Already blacklisted on the other linux versions, but is failing on
SLES now in 5.15
Pick-to: 6.1 5.15
Change-Id: I267908adf94ede51e5520aa2cb806b394fb0438e
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This removes traces of QPropertyAlias which is internal API which is
a) not really working even before this change (no compatibility with
QBindableInterface due to QPropertyAlias not being derived from
QUntypedPropertyData)
b) not used anywhere
For BIC reasons, we need to keep some methods still around until Qt 7,
though.
Change-Id: I5bb4735a4c88cba275dc2cc6e29a46ca09622059
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This takes care of the last two QSFPM properties. They were postponed
because of the tricky relation between them and some bugs in handling
the changes.
The bug was fixed in bcbbbdb2d6 and
now the behavior is well-determined: updating filter regexp does
trigger case sensitivity change and vice versa. However updating
only regexp pattern (via QString overload or setFilterFixedString
or setFilterWildcard) does not change case sensitivity.
Task-number: QTBUG-85520
Change-Id: Idc41cf817de9e6263ed65a80fa40fc8415c8c856
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
filterRegularExpression and filterCaseSensitivity
will be handled in a separate commit
Task-number: QTBUG-85520
Change-Id: I848c5c6cbe8642efa156f4f5d33467976bbf0351
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
takeItem and takeChild do not signal the change correctly to the
external world, this change fixes the problem
Fixes: QTBUG-89145
Pick-to: 6.1 5.15
Change-Id: Ib4844ace53007068a2cd62eba64df99e6e45fdc0
Reviewed-by: David Faure <david.faure@kdab.com>
child->widget() returns null if the layout item is not a widget.
Thus, calling removeWidget(nullptr) will remove all non-widget items
such as layouts or strechers.
Change-Id: I772c1158d0f7e8e2850b6e571b0405a2896f09b8
Pick-to: 6.0 6.1 5.15
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Now that we run tests for static Qt builds in the CI, it makes sense
to restore the CMake build tests that check that static plugin
importing works correctly.
Resurrect the previously commented out test_import_plugins project and
port the mockplugins qmake projects to CMake.
mockplugins is a CMake project that uses the internal Qt CMake API to
build and install some Qt modules and plugins.
test_import_plugins depends on that test (via a CMake fixture) to
build public projects that use those plugins.
The installation of the mockplugins modules pollutes the Qt install
prefix, but in the CI that only happens on the test VM, which means
the release packages are not affected.
Locally on a developer machine the Qt install path will be polluted,
but it's not that much of a big deal. We could try and address that in
a future change by using the QT_ADDITIONAL_PACKAGES_PREFIX_PATH
functionality added for Conan to allow the installation of Qt packages
into a non-standard prefix.
Task-number: QTBUG-87580
Task-number: QTBUG-92933
Change-Id: I0841064a60a5ffba5118640d3197527a38ba6c30
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The Qt CMake packages are not installed yet, so the CMake build
projects can't find Qt and fail to configure.
Skip the CMake build tests in a prefix in-tree configuration and issue
a warning for informational purposes.
Change-Id: Ie5cb5b9f6f1d8ec258b70528680e31c711c20f85
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When the listview setWordWrap is true and ScrollBarPolicy is
ScrollBarAsNeeded, if the text needs a newline display and the
vbar is not shown, the width of the item was subtracted from
the width of the scrollbar.
In most cases, the listview needs to reserve the size of the scrollbar.
But if the flow is TopToBottom and the vertical scrollbar is not
visible, the width of the vertical scrollbar cannot be reserved.
Fixes: QTBUG-92366
Pick-to: 5.15 6.0 6.1
Change-Id: I73cce691099a253d409019dbb3fe9a16e1830bb1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The commit amends commit 3966b571 to take UNC prefix into account as
well. Fixes the weird file name output as reported in QTBUG-74291 and
QTBUG-83365. Replace manual separator normalizing in qt_cleanPath(),
this is another spot where UNC prefix handling needs to be applied.
Also make QTemporaryFile operate on '/' as file separators to fix
creating both file types with native path separators on network shares.
Fixes: QTBUG-74291
Fixes: QTBUG-76228
Fixes: QTBUG-83365
Pick-to: 5.15 6.0 6.1
Change-Id: Iff8d26b994bf4194c074cd5c996cda3934297fa5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
from qt/qtx11extras 0e67fb41cfc4b4bfbaa7dc75f8ddebdf5a08e836.
The plan is to expose these as native interfaces, so this is a first
step.
Task-number: QTBUG-83251
Change-Id: Iecba8db9a4f616a08a3750ddaae08cc30ec66f89
Reviewed-by: Liang Qi <liang.qi@qt.io>
Most nested block elements are merged together, so while we shouldn't
do real inheritance we need to do it when block elements are combined.
Pick-to: 6.1
Fixes: QTBUG-91236
Change-Id: I9e37b15f705db92c79a620d0d772f25d0ee72b8d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
[ChangeLog][QtCore][QMetaMethod] It is now possible to query the
constness of a method with QMetaMethod::isConst.
Change-Id: I8a94480b8074ef5b30555aeccd64937c4c6d97d4
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The libs and symlinks are in the same directory, no need
to have absolute paths.
Change-Id: I22dab933b1f3bdf244b0953c6bb7caaeedef5697
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a tab has a font assigned to it through a style sheet, then take the
font size into account when calculating the contents rectangle.
Add a test, which hardcodes the windows style to avoid flaky behavior
when e.g. macOS lays tabs out in the center.
Fixes: QTBUG-92988
Pick-to: 6.1
Change-Id: Ifb0ac97db7647cc25367972737be8878e50f6040
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When trying to find the original window title, check for another
maximized sub window and use its title. Protect the calls to
setWindowTitle to prevent the original title from being cleared.
Pick-to: 6.1 5.15
Fixes: QTBUG-92240
Change-Id: I55175382ab261b4cf8b5528304adaaec4fbe2c31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We only need to the location of certain paths for the test. For that,
qtpaths is sufficient.
Change-Id: I5af0d56b548629edc48949150ed8fbd408b617a6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we are having nested lists then we need to ensure that the HTML is
outputted correctly so that the closing list and item tags are placed
in the right order.
[ChangeLog][QtGui][QTextDocument] The output of toHtml() now handles
nested lists correctly.
Fixes: QTBUG-88374
Pick-to: 6.1 5.15
Change-Id: I88afba0f897aeef78d4835a3124097fe6fd4d55e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This unit test is related to the parent commit.
Html export used to omit the text-decoration for the default font,
this unit test ensures that this property is added to the exported
html.
Fixes: QTBUG-91171
Change-Id: Ib68bec27f9963cdcac5c553b2c07557717b1c22e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It used to be ignored because we couldn't disable it, but that works
fine now. So re-enable it.
Fixes: QTBUG-91171
Change-Id: I4cf966211bb200b73326e90fc7e4c4d3d4090511
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
CLDR v39 has no locales for Abkhazian, so the locale_index[] entry for
it actually indexes the last entry before the next language up the
enum. This has m_language_id less than Abkhazian.
Change-Id: If8b88f30476a981b3ee00ff8760a46ede0b7aab7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The calls were trying to pass a JNIEnv* from a QJniEnvironment using
conversion operator which was removed, and weren't detected since they
are templates and were missing tests. This fix that and add test cases
for setField() and setStaticField() calls.
Pick-to: 6.1
Change-Id: I6e1e6b7f557bbc664248ad364c48d63f58b70756
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The API allows users to request and check the status of various
permissions. A predefined enum class of the common permission types
on different platforms is used to allow requesting permission with
a common code. Platform specific permissions are defined only on their
relevant platform. For permissions that are not predefined, they can
be requested via a string variant of this API.
This adds the Android implementation only.
[ChangeLog][QtCore] Add new API for handling app permissions with an
initial implementation for Android.
Task-number: QTBUG-90498
Change-Id: I3bc98c6ab2dceeea3ee8edec20a332ed8f56ad4f
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The biggest trick here is the getter (QAbstractProxyModel::sourceModel),
which is returning nullptr, while internally using a global
staticEmptyModel() instance.
This lead to inconsistency while binding to a proxy model without
source model. The bound object would point to staticEmptyModel()
instance, while sourceModel() getter returns nullptr.
To solve this issue a custom QBindableInterface is implemented.
Task-number: QTBUG-85520
Change-Id: I597df891c7e425d51b55f50ccbacabdfe935cbac
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Although the code is never executed compilers still throw a warning
because it's compiled.
Amends 12b8283f89
Pick-to: 5.15 6.1
Change-Id: Ib790d4bcb33c4b9f2a55a784b852275b59debde9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Currently, we test at 1x, 2x, and mixed typical desktop
DPI values. Add android DPI values, with scale factors
in the 2.5 - 3.75 range.
This test currently uses 96 as the base DPI (and so
does the Android platform plugin), so we normalize
the values to use that base DPI.
Change-Id: I25b66f5e16d37c01758d5623b805e4141247a74a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Previously, if multiplication overflowed when trying to set the date
and time of a formerly short-form QDateTime, its status didn't get set
to reflect the failed validity check. Added a test that now correctly
detects that it's produced an invalid date-time on overflow, where
previously it produced a wrong valid date-time.
Change-Id: Id46ca34d1e32e9b9b0630f3723cefd1c13b5761e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QCOMPARE made dead code of a more verbose QVERIFY2 below
Change-Id: I26b8286f61534f88b649fffd166b67d8603280a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Instead of silently failing, we now print an explanatory warning to aid
with debugging.
Task-number: QTBUG-89512
Change-Id: I36dd2ce452af12d0523c19286919095e366bd390
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch extends the QJniObject::callStatic[Object]Method functions
with the overload which accepts a jmethodID parameter. This can be
convenient when the method id is already cached and you do not want
to query the method by its name and signature.
Task-number: QTBUG-92952
Change-Id: Ib0852a5a27da2a244ac63112784751ef9e32cfa5
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This patch adds some convenience methods to QJniEnvironment API:
* an overload of registerNativeMethods() that accepts jclass instead
of const char *className.
* a findMethod() function is added to query a methodID of a static
or nonstatic method by its name and signature.
Task-number: QTBUG-92952
Change-Id: Ib1bc892decea97e625c4822888b6183af6edd6dc
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
This ensures correct handling of names with special characters.
Pick-to: 5.15 6.1
Fixes: QTBUG-92584
Change-Id: I95c7c54d9c7ee00b221a55f3d07ef1ec3a3bd217
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Test the name=factor format and various incorrect spec
strings. We expect that the screen DPI is used if the
scale factor specification is incorrect.
Change-Id: Ia990e70cf71e370dd2bb4b1047a101dfe9e59cb0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Skipped startValue/endValue properties, since they are computed and
writable, which is not supported at the moment.
Skipped currentValue, since its setter might be called inside the
getter, which is not recommended.
Task-number: QTBUG-85520
Change-Id: I1f872b4fcc7227ed91b6915891bbc66019151826
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch amends bcbbbdb2d6.
It fixes the logic of filterCaseSensitivityChanged signal emission.
The call to QRegularExpression overload of setFilterRegularExpression
could change the filterCaseSensitivity, but the signal was never
emitted.
[ChangeLog][QtCore][QSortFilterProxyModel] A call to QRegularExpression
overload of setFilterRegularExpression now emits a
filterCaseSensitivityChanged signal, if required.
Pick-to: 6.0
Pick-to: 6.1
Change-Id: Id4ef04227c1f8ed98153fa5107ec3fbe4c0c77fb
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
And use this in the authenticationRequired test.
Pick-to: 6.1 6.0 5.15
Change-Id: I18e991eb67168214c2c4f829afaca5018568e989
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit 40330b8f0a.
It was a bad idea to use QFlatMap here, because it is a sorted map, but
we need to keep the passive grabbers in the same order as the grabs happened.
So need to go back to an earlier version of the patch that uses two parallel QLists.
Pick-to: 6.1
Change-Id: I9e6013c2565986fe1eb9fd754f8259766f83bee5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Analysis of problems with the new test for qFuzzyIsNull() revealed
that, where its version for double uses approximately 4500 * epsilon
and for float used 84 * epsilon as threshold, the qfloat16 version's
value was barely more than epsilon, with the result that the test had
to use a different value than the threshold to pass. (Converting the
threshold from float to qfloat16 and back made it bigger; in effect,
the threshold value was not <= itself.)
Furthermore, comparison with qFuzzyCompare() implied a value of
1/102.5 should be used, roughly 10 * epsilon, for consistency. When
1/102.5 is rounded to three significant digits (the precision we use
in QTest::toString(), for example), to give 0.00976f as threshold, we
get a value that, after conversion to qfloat16 and back to float, does
give a result <= what we started with. So change qFuzzyIsNull() and
its test to use this as qfloat16's threshold value.
[ChangeLog][QtCore][QFloat16] The qfloat16 threshold value for
qFuzzyIsNull() has changed from 1e-3 to 9.76e-3, almost a factor of
ten increase, for consistency with qFuzzyCompare()'s tolerance. Values
between these would previously have had qFuzzyIsNull(f) false despite
qFuzzyCompre(f, 1+f) being true.
Change-Id: I35816dce78da34a3e2339c8bc42d5bd03714a3f6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They were missing.
I also wanted to verify that it's true for sub-normal values.
At the same time, relocate qfloat16's implementation of qFuzzyIsNull()
to between those of qFuzzyCompare() and qIsNull(), since its apparent
absence initially confused me.
Change-Id: I9637c0070e754d16744c76fc9f846596257c6a63
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit ec8808c302 but
retains its test, as the problem it fixed is now solved by having the
TZ backend validate the ID it's passed, so that it now only accepts
valid POSIX zone-descriptions and valid IANA IDs. The former were
being excluded by this check.
Amended a POSIX test to fail with the check in place; it passes now.
Change-Id: I0d5e8c6e0a315ac2509f3d23bebb52aede8f79d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
With Qt 6 we made HTTP/2 default, which exposed missing handling of
401 Unauthorized (and 407 Proxy Authentication Required).
In HTTP/1.* we would handle this after the response had finished, while
handling the status code. For h2 this path isn't used since it is
heavily reliant on the structure we have for HTTP/1.* (one request per
channel). So we must handle the status code and header directly.
Having that part fixed exposed another issue - when resetting/rewinding
uploaded data we were not resetting the 'totallyUploadedData' counter in
the reply (this, in turn, exposed another small issue). Because of that
we did not actually send any data on the retry, only sending the
content-length followed by no data.
Finally, the small issue mentioned in the previous paragraph was how we
check if we have uploaded all our data. It was only checking if the
byte-device was atEnd(), which it was. But only because it had not yet
prepared any data for us.
Fixes: QTBUG-91284
Pick-to: 6.1 6.0 5.15
Change-Id: I798d105b02688b18a02897cc476f19f57a47f98f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
With C++20 standard, src/corelib/kernel/qproperty.h of Qt Base cannot be
compiled at line 100:
QPropertyBindingSourceLocation(
const std::experimental::source_location &cppLocation
)
The reason is that source_location has been merged into namespace std
since C++20, and the header file has also been change from
<experimental/source_location> to <source_location>.
The problem can be avoided by define a constant.
Fixes: QTBUG-93270
Change-Id: I46b4daac6ea20f9623b43746880500d41396afb2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Cast consistently to quint8, which is the type we are streaming out
in the test.
Change-Id: I44d360ca6b75f14e7a2b80962ad249a6f6b1cb31
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The comparison between nullptr and QWeakPointer was just bogus
and ill-formed. The INTEGRITY compiler catches that even if
nothing tries to use the comparison. It is an ill-formed, no
diagnostic required case of a function template never being
able to produce a valid specialization. And while we're at
it, this patch makes the result of comparing a nullptr to
a QWeakPointer or vice versa the same as asking .isNull() from
the weak pointer, because it seems mind-boggling if those
are not the same operation.
Task-number: QTBUG-93093
Change-Id: I0cc80e795c9af2be1b76de05157aa458ef260f2e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHighDpiScaling has two init/update functions:
- initHighDpiScaling(): called once during QGuiApplication construction
- updateHighDpiScaling(): called whenever (relevant) screen configuration changes
Currently the calls to updateHighDpiScaling() are made from
multiple places including platform code. Simplify by calling
it from two locations:
- QWindowSystemInterface::handleScreenAdded()
- QGuiApplicationPrivate::processScreenLogicalDotsPerInchChange()
Replace comment about early calls to qt_defaultDpi with a
test which calls qt_defaultDpiX/Y with no screens attached.
(Looking at the qt_defaultDpiX() implementation, it is unlikely
that there will be a problem as long as updateHighDpiScaling()
is called before QGuiApplication::primaryScreen() starts returning
a non-null value.)
Change-Id: I447db42894617495843a5cb531a1322b000fed62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In Qt Quick we now need to keep track of which QQDeliveryAgent is
responsible when a point is grabbed, either passively or exclusively.
When we re-deliver to that grabber, we need to do it via the same agent,
so that the same scene transform is used, and the grabber will see the
event in the correct coordinate system. It's easier to track this
mapping here instead of in a separate map in Qt Quick.
Pick-to: 6.1
Task-number: QTBUG-92944
Change-Id: I69f769c694d0da24885cdf4087e5032022bff629
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is one of the more complicated ports. The target object
was represented by two variables in the past: A raw pointer and a
QPointer. The QPointer is checked in some cases to check whether
the target object still exists.
This patch introduces a targetObjectDestroyed() slot and connects
it to the destroyed(QObject*) signal of the target object.
In this slot, the animation is stopped. The checks become
obsolete thereby and it is sufficient to represent the target
Object in one raw pointer.
This raw pointer becomes a bindable property.
Fixes: QTBUG-92992
Change-Id: I7e2ddb5d8aed007400fe74bea1becf7bdfbf2563
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Cast size_t return from std::vector explicitly to int to silence compiler
warnings.
Change-Id: I0c425b3cec7feec0712e1173ab7e60b28695d6d7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Windows wants ISO C++ _fileno and _unlink instead of posix fileno and
unlink. For fileno we have the QT_FILENO macro in qplatformdefs.h, so use
it. For unlink we don't have a macro in Qt, so declare one in the test.
Change-Id: I56c5c3fb4e500769c744132c46107816f89bb2c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The property 'model' is ported to a bindable property.
The properties hasSelection, selection, selectedIndexes,
and currentIndex are left for later patches.
Task-number: QTBUG-85520
Change-Id: Ia424ce99fc80c3d807c634c21d161a3ad94b27d2
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Those tests don't fail anymore and show in CI as BPASS, so we
can safely, hopefully, unblock them
Task-number: QTBUG-87429
Fixes: QTBUG-68974
Fixes: QTBUG-69166
Fixes: QTBUG-87403
Fixes: QTBUG-87411
Fixes: QTBUG-69083
Fixes: QTBUG-69084
Fixes: QTBUG-87426
Pick-to: 6.1
Change-Id: I831b955116c0f465319b9c5fc726dd98804d1c00
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since these tests do not actually use the filename in the loops, add
macros to declare them unused.
Change-Id: I3362e0478ac6802b37f54f90ca377aa462570d8c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously, an apparent POSIX rule would be saved and any defects in
it would only be discovered when trying to use it to generate
transitions. Instead, check that it has the right form during the
initial parsing of its data.
In the process, since checking for DST in the process is trivial,
implement a long-standing TODO to cache hasDaylightTime()'s
answer. The array it scanned was in any case being scanned during
construction, so detecting DST in init()'s scan is trivial; and its
failure to check the POSIX rule mean it failed to notice when zones
entirely specified by a POSIX rule have DST.
Adapt a test using a POSIX-only rule to verify it does know the zone
has DST; it did not, before this change.
Change-Id: I690c013d3331600f7348dae61c35d41e5599da70
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The description necessarily has fake transitions at start and end of
the year, potentially outside the year. These transitions should not
be reported by QTzTimeZonePrivate as transitions, although its data()
must find a "transition" whose data it can use (as in the permanent
standard time case, which could potentially be represented the same
way, although there's a saner way to do so, that the code already
handles) to report the zone's properties.
In the process, fix (and make more straightforward) the convoluted
decision-making code that was deciding which transitions to include in
the returned list. It was assuming invalidMSecs() would be set as the
atMSecsSinceEpoch of a transition, although this is computed in a way
that makes that value most unlikely, even when the result is invalid.
It also rather confusingly mixed < 0 tests as tests for overflow with
the one < 0 test that's about ignoring DST before 1970. Also added
comments to clarify some of what's going on there.
Expanded a recently-added test of a permanent DST zone to verify this
now works correctly.
Change-Id: Ia8d98f433fb1e479dba5479220a62196c30f0244
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are two formats for such fields: one with a J prefix on a number
in the range 1 to 365, the other with no prefix and a range from 0 to
365. The code mistakenly treated the latter as if its range were from
1 to 366. The J-form doesn't count Feb 29th, so March always starts on
day 60; the code tried to take that into account, but adjusted in the
wrong direction (and this mislead me, in a recent partial fix, into a
fence-post error).
Add a test-case based on the Africa/Casablanca POSIX rule seen on RHEL
8.2, which tripped over the off-by-one error without a J prefix. This
incidentally also tests the J case.
Change-Id: I692ca511e5c960f91a6c21073d3b2f037f5e445f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It usually fails the test with "corrupted size vs. prev_size" message
coming from malloc() or some other memory allocation routine (which
signals about memory corruption probably)
Task-number: QTBUG-93176
Change-Id: I5e34971267c52c63cda2489bef5b09bed739f532
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 6d52d86b999088ec07e58c14197bddda043ef0aa)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
The major part is stability tests for QList operations,
Also added std::shared_ptr to the Custom type. shared_ptr
accesses the memory which does not directly belong to
QList, so using it inside a passed-to-qlist type is
beneficial (e.g. ASan could catch extra issues)
Basic prepend-aware cases added to QString/QBA tests
Task-number: QTBUG-93019
Change-Id: I50e742bdf10ea9de2de66539a7dbb9abc4352f82
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit adb41bbe00b2b853d4dd26cd9ee77ae5ed541576)
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Test the relocation logic through the QADP::relocate() method which
basically calls q_relocate_overlap_n inside and then ensures that
the data pointers are in good state
Running these locally in fact revealed a bug in the implementation,
so these tests are definitely good to have
Task-number: QTBUG-93019
Change-Id: I353ed46a31c5c77cd0c5fcacd3dfce46e5cf3e67
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit 65d0f6829cc124f6d0d4003a17bedcb74dddf33b)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Use the data moves to readjust the free space in the QList,
which ultimately fixes the out-of-memory issues caused by
cases like:
forever {
list.prepend(list.back());
list.removeLast();
}
Task-number: QTBUG-91801
Task-number: QTBUG-91360
Task-number: QTBUG-93019
Change-Id: Iacff69cbf36b8b5b176bb2663df635ec972c875c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
(cherry picked from commit a0253f5f0249024580050e4ec22d50cb139ef8d9)
DEFAULT_IF needs to be true so that in a static build the
built plugin is automatically linked into the test executable
using the special static plugin per-repo behavior in
qt_internal_add_executable.
The QtPostProcess routines are not executed for this test project
because we don't use qt_build_repo. This means that no
QtFooPluginCMakeConfig.cmake file is generated and thus there's no
point in using qt6_import_plugins because the pulic plugin genexes
won't know about this target anyway.
Explicitly set the CLASS_NAME so that the name expected by the
Q_IMPORT_PLUGIN macro matches the name of the plugin instance that moc
generates in QT_MOC_EXPORT_PLUGIN.
Amends 22e967c304
Task-number: QTBUG-87580
Task-number: QTBUG-90341
Pick-to: 6.1 6.0
Change-Id: I5ef361e7e2cebc46b35310c679f15c84cd61b4a5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The six properties duration, updateInterval, currentTime,
direction, loopCount and easingCurve have been ported to the
new property system and are now bindable.
Drive-by renamed a local variable to avoid shadowing.
Task-number: QTBUG-85520
Change-Id: Ibabf106f5200d2dd4329a1e1f96112eccc29d6b1
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For items that are children of other items, removeRows calls
beginRemoveRows directly and then once again inside takeChild()
The signal blocker that dates back to the monolitic import from Nokia
prevents the model from emitting extra signals
but the persistent indexes are corrupted nonetheless.
Fixes: QTBUG-90030
Pick-to: 6.1 6.0 5.15
Change-Id: I5bc4b2598bf13247683b113faeec22471f1f04a4
Reviewed-by: David Faure <david.faure@kdab.com>
When inserting rows to a branch with no columns
the tester should not complain about indexes being invalid
Pick-to: 6.1 6.0 5.15
Change-Id: I466f4e5140b10f6dcf65a71f109c2d3be7336507
Reviewed-by: David Faure <david.faure@kdab.com>
The qt_ForceTlsSecurityLevel symbol is not defined if SSL is not configured,
so don't use it in the QNetworkReply test if it's not.
Change-Id: Id3110a1997fea1648b48bfc411e90e7efe306678
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Routine update with minor changes to locale data, no new languages,
territories or scripts. Various Spanish locales change m_grouping_top
from 1 to 2, reversing a change to a test of Costa Rica's currency
formatting made in commit bb6a73260e.
Includes updates to time-zone IDs.
Fixes: QTBUG-91478
Pick-to: 6.1 6.0 5.15
Change-Id: I78ee161275b3c456c5800a7317a96947c932cf8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt defines some integral datatypes (qsizetype, qintptr, quintptr,
qptrdiff) not in terms of the corresponding language datatypes (resp.
make_signed_t<size_t>, intptr_t, uintptr_t, ptrdiff_t) but as "integer
types with the same bit size of the corresponding language type" (and of
course the corret correct signedness for the target type).
This makes the Qt datatypes not printable via printf-like formatted
output, incl. qDebug, qWarning, QString::asprintf and so on; that's
because there isn't a format modifier that would universally work
with the Qt definitions.
For instance, on a 32 bit platform, ptrdiff_t may be a typedef for long,
while qptrdiff is a typedef for _int_ instead. Both long and int would
indeed be 32 bits, but they still are different types, and this means
that the ptrdiff_t-specific 't' length modifier would be wrong for
qptrdiff:
qptrdiff p;
printf("%td", p); // WARNING: -Wformat: wanted long, got int
Similarly, not using 't' breaks on 64 bits, and so on and so forth.
There isn't a way out, short of inserting casts on every print
statement.
So, let's adopt the same solution C/C++ use for their own integer
typedefs: the PRIx macros. This allows one to always use the correct
formatting specifier without the need of a cast.
I'm not adding the macros for the qintXX datatypes, as they already
exist in the Standard Library.
[ChangeLog][QtCore][QtGlobal] A series of PRIxQTDATATYPE macros have
been added. They make it possible to print some Qt type aliases
(qsizetype, qintptr, etc.) via a formatted output facility such as
printf() or qDebug() without raising formatting warnings and without
the need of a type cast.
Change-Id: I473226a661868aed9514d793c8e6e4d391ab5055
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use QBENCHMARK_ONCE rather than QBENCHMARK to avoid skewing the results:
when the QBENCHMARK block is repeated multiple times after the setup
code above runs once, only the first setFilterRegularExpression() call
unfilters some rows, while the subsequent calls simply check that there
is nothing to do.
The added benchmark is sensitive to the inefficiency - quadratic rather
than linear time complexity - fixed by
7d92ef63d7. The following two tables
contain the benchmark results on my GNU/Linux system. The numbers denote
milliseconds per iteration.
1. Qt 5.15.2 without the performance fix:
10K 25K 50K 100K 250K 500K
no match 0 1 2 5 14 28
all 0 0 0 1 3 7
first 0 1 2 5 14 28
1000th 2 6 12 25 68 302
middle 3 34 132 518 3300 13665
1000th from end 1 4 9 19 50 103
last 0 1 2 5 14 30
each 10'000th 0 39 211 937 6326 41050
each 100'000th 0 1 2 5 4226 34780
Without the fix the benchmark times out and aborts at 1000K and 2000K
data rows.
2. Qt 5.15.2 with the performance fix:
10K 25K 50K 100K 250K 500K 1000K 2000K
no match 0 1 2 4 12 26 56 136
all 0 0 0 1 3 7 14 28
first 0 1 2 4 12 26 56 136
1000th 0 1 2 4 13 28 62 145
middle 0 1 2 4 13 27 59 142
1000th from end 0 1 2 4 13 28 60 145
last 0 1 2 4 13 27 59 141
each 10'000th 0 1 2 6 22 69 290 1413
each 100'000th 0 1 2 4 13 30 81 261
Change-Id: I419a5521dd0be7676fbb09b34b4069d4a76423b1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Even if the user (usually accidentally) sets a thread count of zero or
negative. The reporter in the bug report did
QThread::idealThreadCount() - 1 on a 1 CPU system...
Drive-by add to the documentation and the missing #include.
Pick-to: 6.1 6.0
Fixes: QTBUG-93007
Change-Id: I6cdea00671e8479b9c50fffd167807d14e030154
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Don't call pre routine function in qAddPreRoutine if
the qt_call_pre_routines is not called
Pick-to: 6.1 6.0
Task-number: QTBUG-90341
Change-Id: I0ee70561dc57b857f8b3b1cf42c9dfe0cf45bd49
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Define the template calls in the header to allow for better type
handling and checking with constexpr and avoid overuse of macros.
Depending on the type provided in the QJniObject's call, the
signatures and the correct JNI function variant is used.
If a type is not supported a static_assert throws a compiler error.
Pick-to: 6.1 6.1.0
Change-Id: I8a4d3ce85e1ff76ef385633f2a68511fffd12e55
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
When cross compiling from a case sensitive file system, casing
matters, and mingw headers and import libraries consistently
use lowercase.
This was uncovered by d385158d5213ef568b7629e2aa4a818016bbffac;
prior to that, the schannel TLS plugin didn't end up built (at
least when cross compiling).
Fix other similar cases that can be found by grepping the repo.
Change-Id: Ia696e17b7aaa979d7b7f5b0801383f338a8b585b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Those overloads have been documented as obsolete, but never been deprecated.
Add the deprecation macros to trigger warnings as of Qt 6.2.
The overloads taking a single StandardButton should not be deprecated until
Qt 7, as otherwise porting from old to new API will require an unnecessary
cast to StandardButtons for calls with only a single enum value.
The unit test explicitly tests the deprecated members, so disable warnings
there.
Fixes: QTBUG-92483
Change-Id: I283ddce4681eafda2378607f999946e56bbb777e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
All TLS (and non-TLS) backends that QSsl classes rely
on are now in plugins/tls (as openssl, securetransport,
schannel and certonly plugins).
For now, I have to disable some tests that were using OpenSSL
calls - this to be refactored/re-thought. These include:
qsslsocket auto-test (test-case where we work with private keys),
qsslkey auto-test (similar to qsslsocket - test-case working with
keys using OpenSSL calls).
qasn1element moved to plugins too, so its auto-test have to
be re-thought.
Since now we can have more than one working TLS-backend on a given
platform, the presence of OpenSSL also means I force this backend
as active before running tests, to make sure features implemented
only in OpenSSL-backend are tested.
OCSP auto test is disabled for now, since it heavily relies on
OpenSSL symbols (to be refactored).
[ChangeLog][QtNetwork][QSslSocket] QSslSocket by default prefers 'openssl' backend
if it is available.
[ChangeLog][QtNetwork][QSslSocket] TLS-backends are not mutually exclusive anymore,
depending on a platform, more than one TLS backend can be built. E.g., configuring
Qt with -openssl does not prevent SecureTransport or Schannel plugin from being
built.
Fixes: QTBUG-91928
Change-Id: I4c05e32f10179066bee3a518bdfdd6c4b15320c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If the signal takes a value, we pass the current value of the property
to it.
As we now use eager evaluation, accessing the current value is now
possible.
Change-Id: I5e6947a6575bfa8ca5143f56620c645d4750a686
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This mirrors the functionality of QObjectCompatProperty::notify, and can
be useful to delay notifications until a class invariant has been
restored.
Change-Id: I1c16a0b1537a1b53d144c8abe48e546553edf877
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch fixes the breaking of case sensitivity handling. The removal
of QRegExp killed the wrong code paths which leads to inconsistencies
when changing the regular expression throuh methods like
setFilterWildCard or setFilterFixedString. Changing the case sensitivity
also nukes the original options that were set on the regular expression
if it was set through setFilterRegularExpression.
[ChangeLog][QtCore][QSortFilterProxyModel] Case sensitivity as well as
regular expression options handling have been fixed. The original value
is properly kept when using setFilterWildCard and setFilterFixedString.
The regular expression options are now also properly kept when changing
the case senstitivity through setFilterCaseSensitivity.
Fixes: QTBUG-92260
Pick-to: 6.1
Pick-to: 6.0
Change-Id: Ifb4732306f0c7d79ad0b18d3f5437c4523bb40e5
Reviewed-by: Igor Kushnir <igorkuo@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
contentsMargins is a Q_PROPERTY on a QLayout. Qt 6.1 introduced
QLayout::unsetContentsMargins() to reset the contents margins to the
"default" ones (that the user can't know); that's the textbook
description of a RESET function for the property.
Add some tests also for unsetContentsMargins.
[ChangeLog][QtWidgets][QLayout] The unsetContentsMargins() function now
acts as the RESET function for the contentsMargins property.
Change-Id: I463d88363c11f4a15ad3d6af71401d8698de1d41
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Extended QObjectPrivate::ExtraData to store a pointer
to its parent, and reimplemented qGetBindingStorage()
function for QObjectPrivate::ExtraData.
This allows to use Q_OBJECT_COMPAT_PROPERTY macro
for a property, stored in QObjectPrivate::ExtraData
and solves all the problems with calling a custom
setter.
Task-number: QTBUG-85520
Change-Id: I40e01c29430846359ef9160fa1ae97c702be9a18
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Removed 5.15 specific QVector code, which is unlikely usable now when
we are at 6.1+ timeline (that was really only a nice-to-have during
5.15 -> 6.0 transition)
Added "remove first" benchmark to track the fast (or not so fast)
removal path
Updated mid insertion and mid emplace to actually trigger both paths
(growing at the beginning and at the end), before it was really using
just one side, which is not quite the "mid" way it feels. Also changed
mid insertion to actually use the insert algorithm. Seems like
insert(i, t) calls emplace under the hood at least from the visual
introspection
Change-Id: I01b82cfa0ae38d481ea7362947f3607d757bf5d0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add rounding one place, and skip addFile for now since
the assumption about rounding dpr up no longer applies.
Pick-to: 6.1
Change-Id: I0a84dfabb218acf42cb3816ba50ef899c8762523
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A POSIX rule's transition time is allowed an hour in the range from
-137 to 137; in particular, a negative hour is allowed, and used by
some Greenland zones using Europe's time-of-transition which, as they
are more than two hours west of Greenwich, happens before midnight.
This means the time of transition can't be represented by a QTime(),
so propagate the int that represents it to the code that consumes it;
and treat parsing failure as an error rather than "correcting" it - if
the transition time is given, it must be valid.
Changed tst_QTimeZone::isTimeZoneIdAvailable()'s verification of
validity to report the name of the zone it thought was invalid.
(A later change, validating POSIX rules, caued this to fail for
America/Nuuk without the present fix.)
Change-Id: I5c9127ac34d878554dd0aca1c1c7338c7e0e1c28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the ID isn't even valid, don't waste cycles trying to make sense of
it as identifying a time-zone.
Add test of an invalid ID that provoked an integer overflow on trying
to parse it as a POSIX zone specification.
Fixes: QTBUG-92842
Change-Id: Ib80bbb88c11c0484ce0358acabbdc25c5bd8e0b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test use aggregate initialization on some classes which however
are no longer aggregates in C++20 (the rules changed again; in C++20
having a user-*declared* constructor makes a class not an aggregate).
Just add a constructor so the code keeps compiling in both 17 and 20.
Fixes: QTBUG-92963
Pick-to: 6.0 6.1
Change-Id: I52371c5ee34c84358987b5ae8bee9ab9c49c8eab
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before this change, QXmlStreamReader prefix value was always an empty
string for EndElement when the documentation state : "Returns the prefix
of a StartElement or EndElement."
The error was a missing update of the prefix value when parsing
EndElement.
I updated the tests data which were also wrong because no prefix were
reported even for </a:foo>. No new test is necessary, I think, the test
data already cover the cases of EndElement with a prefix and without one
(unchanged here).
Fixes: QTBUG-86847
Pick-to: 5.15 6.0 6.1
Change-Id: I0ad38b9741d760f1ce688a36f969ec14e20a928c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When rows are removed from a model with no columns,
the test should not report a problem if indexes are invalid
Fixes: QTBUG-92886
Pick-to: 6.1 6.0 5.15
Change-Id: I7a042dfdb2575f87208a00cbed13db3869807f84
Reviewed-by: David Faure <david.faure@kdab.com>
The testcase relied on having optional packages, and that the last
package in that list was found. Otherwise the version numbers of
the found modules were not set.
Change-Id: I76743fd029d6eed2f4b347280591e6fdaed19053
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
ScreenGadget visualizes virtual desktop screen layout,
in device independent and native pixels.
This can be used to debug the (sometimes surprising)
device independent screen geometry resulting from Qt
applying a scale factor.
Change-Id: I5b18e0fc9a54ba3e14d648794429b2eeadd25748
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Display active environment variables. Reorder the
labels with device independent values to the left
and native values to the right. Display the Qt scale
factor.
Change-Id: If95c252b06eff5abd91a25847777246effe94be2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
There is only one property in QSequentialAnimationGroup,
currentAnimation.
This patch ports this property to the new property system
Task-number: QTBUG-85520
Change-Id: Id528d30f551e88a6165bbb6a3c09d44e89257de5
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Port watchMode in QDBusServiceWatcher to the new property
system. This is the easiest part.
Task-number: QTBUG-85520
Change-Id: I588212af205e77765862b8fecdbdcbf871717142
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Setting a cancel button on QProgressDialog more than once caused the layout
to be invalid. The layout was only applied when the dialog resizes or the
style changes, but not when a new cancel button is set.
The solution is to update the layout() before showing the dialog when adopting
new child widgets.
Fixes: QTBUG-19983
Pick-to: 6.0 6.1
Change-Id: Id8fb1ac56e94a9bd97d4559a2e8d4835856fd7d0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QList tests have mostly a scheme of:
void opInt() { op<int>(); }
void opMovable() { op<Movable>(); }
void opCustom() { op<Custom>(); }
As a drive by, move the leak checking into a separate struct/macro
Change-Id: I7cdda3a6c2aa324968aa26594da9f9eafbd49a0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A sticky QPropertyBinding is a binding that does not get removed when a
write occurs. This is used in the QML engine to implement support for
the QQmlPropertyData::DontRemoveBinding flag.
Task-number: QTBUG-91689
Change-Id: Ib575b49abe634215318ccc7ba46212cc21eb4dad
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
UAX #29 in Unicode 11 changed the EGC algorithm to its current form.
Although Qt has upgraded the Unicode tables all the way up to
Unicode 13, the algorithm has never been adapted; in other words,
it has been working by chance for years. Luckily, MOST
of the cases were dealt with correctly, but emoji handling
actually manages to break it.
This commit:
* Adds parsing of emoji-data.txt into the unicode table generator.
That is necessary to extract the Extended_Pictographic property,
which is used by the EGC algorithm.
* Regenerates the tables.
* Removes some obsoleted grapheme cluster break properties, and
adds the ones added in the meanwhile.
* Rewrites the EGC algorithm according to Unicode 13. This is
done by simplifying a lot the lookup table. Some rules (GB11,
GB12, GB13) can't be done by the table alone so some hand-rolled
code is necessary in that case.
* Thanks to these fixes, the complete upstream GraphemeBreakTest
now passes. Remove the "edited" version that ignored some rows
(because they were failing).
Change-Id: Iaa07cb2e6d0ab9deac28397f46d9af189d2edf8b
Pick-to: 6.1 6.0 5.15
Fixes: QTBUG-92822
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
There isn't a QByteArray constructor taking a char8_t*. (I am not
sure if there should be one; QByteArray is not going to anything
special about that information anyways.)
Change such strings to be "ordinary" narrow string literals.
There should be no problems at doing so, as by default we build in
UTF-8 mode under all compilers.
Pick-to: 6.1 6.0
Change-Id: Ia200ec6e3b0453bad033d5d8ff34c013bb27abd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add Qt::begin/endPropertyUpdateGroup() methods.
These methods will group a set of property updates together and delay
bindings evaluations or change notifications until the end of the update
group.
In cases where many properties get updated, this can avoid duplicated
recalculations and change notifications.
Change-Id: Ia78ae1d46abc6b7e5da5023442e081cb5c5ae67b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When a property value changes, first update all dependent bindings to
their new value. Only once that is done send out all the notifications
and changed signals.
This way, if a property depends on multiple other properties, which all
get changed, there will only be one notification; and (potentially
invalid) intermediate values will not be observed.
Fixes: QTBUG-89844
Change-Id: I086077934aee6dc940705f08a87bf8448708881f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Too much of the existing code in Qt requires eager evaluation without
large scale modifications. Combined with the fact that supporting both
eager and lazy evaluation has a high maintenance burden, keeping lazy
evaluation, at least in its current state, is not worth it.
This does not diminish other benefits of the new property system, which
include
- a C++ API to setup and modify bindings and
- faster execution compared to QML's existing bindings and the ability
to use them without having a QML engine.
We do no longer benefit from doing less work thanks to laziness. A later
commit will introduce grouping support to recapture some of this
benefit.
[ChangeLog][Import Behavior Change][QProperty] QProperty uses always
eager evaluation now when a dependency in a binding changes.
Change-Id: I34694fd5c7bcb1d31a0052d2e3da8b68d016671b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
At least some modern 64-bit systems have widened time_t to 64 bits
fixing the "Unix time" problem. (This is even the default on MS-Win,
although the system functions artificially limit the accepted range to
1970 through 3000.) Even the 32-bit range extends into January 2038
but the code was artificially cutting this off at the end of 2037.
This is a preparation for using the same also all the way back to the
start of time_t.
In the process, simplify and tidy up the logic of the existing code,
update the docs (this includes correcting some misinformation) and
revise some tests.
Fixes: QTBUG-73225
Change-Id: Ib8001b5a982386c747eda3dea2b5a26eedd499ad
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the backends run into an error in computing the offset, they return
INT_MIN; but they are valled via the front-end, which returns zero
when the zone is invalid. So treat INT_MIN returns from the backend
the same as the case of being invalid.
Change-Id: Ic3c4dfe964dbfba4030c770213eca8a63e84736d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For QProcess, there is no point in suppressing recursive
QWPR::readyRead() emission, as the former manages this logic itself. On
top of that, the non-recursive nature of QWPR::readyRead() indirectly
disallowed reading from the channels inside
QProcess::waitForReadyRead(), if that is called from a slot connected
to QProcess::readyRead().
QWPW had two signals, one allowing recursion and one not.
This commit allows recursion of QWPR::readyRead() and
QWPW::bytesWritten(), and moves recursion suppression to the higher-
level classes. This makes the code more uniform and efficient, at the
cost of a few duplicated lines.
Change-Id: Ib20017fff4d92403d0bf2335f1622de4aa1ddcef
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
pro2cmake did not take into account the
QT -= qt
bit of the .pro files.
Fixes: QTBUG-91676
Change-Id: If1373ee966312e4246490bd7389d75be9fa739cb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The use of "Country" is misleading as some entries in the enumeration
are not countries (eg, HongKong), for all that most are. The Unicode
Consortium's Common Locale Data Repository (CLDR, from which QLocale's
data is taken) calls these territories, so introduce territory-based
names and prepare to deprecate the country-based ones in due course.
[ChangeLog][QtCore][QLocale] QLocale now has Territory as an alias for
its Country enumeration, and associated territory-based names to match
its country-named methods, to better match the usage in relevant
standards. The country-based names shall in due course be deprecated
in favor of the territory-based names.
Fixes: QTBUG-91686
Change-Id: Ia1ae1ad7323867016186fb775c9600cd5113aa42
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since conversion operators do implicit conversion that might bring
some potential issues while using the API, let's stick to having
an operator* instead.
Pick-to: 6.1 6.1.0
Change-Id: Ie7ad5537958944b8d1c11d69fbd30284b4b0344d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
When stroking a dashed path, an unnecessary amount of processing would
be spent if there is a huge number of dashes visible, e.g. because of
scaling. Since the dashes are too small to be indivdually visible
anyway, just replace with a semi-transparent solid line for such
cases.
Pick-to: 6.1 6.0 5.15
Change-Id: I9e9f7861257ad5bce46a0cf113d1a9d7824911e6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As suggested in the API review.
Amends 37bd7b5733
Pick-to: 6.1 6.1.0
Change-Id: Ic3e8567f349568dc3b4dbf79be27c304b39480cf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The POSIX rule parser used by QTzTimeZonePrivate recklessly assumed
that, if splitting the rule on a dot produced more than one part, it
necessarily produced at least three. That's true for well-formed POSIX
rules, but we should catch the case of malformed rules.
Likewise, when calculating the dates of transitions, splitting the
date rule on dots might produce too few fragments; and the fragments
might not parse as valid numbers, or might be out of range for their
respective fields in a date. Check all these cases, too.
Added a test that crashed previously. Changed
QTimeZone::offsetFromUtc() so that its "return zero on invalid"
applies also to the case where the backend returns invalid, in
support of this.
Fixes: QTBUG-92808
Pick-to: 6.1 6.1.0 6.0 5.15
Change-Id: Ica383a7a987465483341bdef8dcfd42edb6b43d6
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Robert Löhning <robert.loehning@qt.io>
On Windows, on exit, the backend will deref (and then implicitly start
deletion of) a COM object. This object tries to communicate with an
object in another thread, though it seems this other thread quits before
the main thread in _most_ cases.
To get around this we move the deletion to earlier in the program. While
this is only reported as a Windows issue it makes for more consistent
behavior if all platforms behave the same.
Document and test that recreation of QNI works as expected after the
destruction (and recreation) of QCoreApplication.
Amends: 0875626e22
Fixes: QTBUG-92568
Pick-to: 6.1 6.1.0
Change-Id: Iffc07f38673019aa059efd4d64d2ad706a03f6fe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
A few methods in QBindable which do not modify anything were not marked
as const so far. This adds the missing const, and a test to verify that
they work.
As all methods are fully inline, this does not cause any binary
compatibility issues.
Fixes: QTBUG-89508
Change-Id: If06d33bc405232887b8c371c268840ba34dbadf6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These are also failing in RHEL 8.2
Task-number: QTBUG-52523
Change-Id: I1448124376a2b415351d1a755043431050808e38
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The test follows up the discussion about tests related to the static
plugin resources:
https://codereview.qt-project.org/c/qt/qtbase/+/341203/6/tests/auto/other/init_resources_static_plugin/CMakeLists.txt#1
It emulates the static plugin that contains resource files. Since the
test already exposed few issues related to the resource object linking
it makes sense to have it in test set.
Change-Id: I62621c2db1eae6ae5842ba52035774a662d93423
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
During reportFinished we may call a continuation which might end up
triggering one of the signals.
Pick-to: 6.0 6.1
Change-Id: I19546fcca12be71cd536e4287eb5eddd9d236830
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Copying is deprecated as of 14f9f00fdb.
Pick-to: 6.1
Change-Id: I235d45ff6769a29a4fdfd888c20dd9fe2fe81346
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QVectorND, QQuaternion, and QColor all operate on floats rather than
qreal or double, so explicit use float literals in the tests.
Pick-to: 6.1
Change-Id: If12cc12ddd9cd8219f3d78bf24e1400921e26c2b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was more complex than needed in a few places.
Change-Id: I0609423f82420f72c65637cf398ccd7694ee85e5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QT_TESTCASE_BUILDDIR was implicitly defined by Qt::Test target for
library users in Qt5. By default, this definition will point to
CMAKE_CURRENT_BINARY_DIR. This logic works similarly to qmake logic.
From user's perspective it might be useful to not rely on standard
search paths, but specify own. This can be done by setting the
QT_TESTCASE_BUILDDIR property for the user's target. CMake will
substute the value of the QT_TESTCASE_BUILDDIR property into the
QT_TESTCASE_BUILDDIR definition.
The implicit QT_TESTCASE_SOURCEDIR also seems to be useful. According
to the current logic, it points to CMAKE_CURRENT_SOURCE_DIR.
Fixes: QTBUG-92079
Change-Id: I8a9065f08e859c713b3c8cc08142a9ced0677770
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
test_QFINDTESTDATA builds the project in the source tree, this is
necessary because the test requires relative paths to the source file
names. This function could be useful for other tests, so it makes sense
to extend the _qt_internal_test_expect_pass/fail macros to support
build in the source tree.
Note that, the SIMULATE_IN_SOURCE argument doesn't build the test in
the existing source tree, but copies source files to the build tree
first to do not litter the source directory.
Change-Id: I16e790d74be2a0c5ca0593e0f88580dbe09882b9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before calling the index function, we need to check the validity of the parameters.
Fixes: QTBUG-91878
Pick-to: 5.15 6.0 6.1
Change-Id: I9ec7265fff3f81b8a288c4ba8fae606a2ec808a6
Reviewed-by: David Faure <david.faure@kdab.com>
There was a recent behavior change where the public CMake API
qt_add_plugin API took into account the value of BUILD_SHARED_LIBS
to decide whether the plugin should be a static or shared library.
Instead, use the following new behavior
- If no explicit option STATIC / SHARED option is passed, default to
whatever flavor Qt was built as.
Aka if Qt was configured with -shared, qt_add_plugin defaults
to creating shared plugins. If it's a -static Qt, create static
plugins.
- If an explicit STATIC / SHARED option is set, override the default
computed value with the given value.
As a result BUILD_SHARED_LIBS does not affect Qt plugins anymore. This
is more in line with Qt expectations.
Add SHARED as a new valid option to pass to qt_add_plugin (it wasn't
before).
Add tests to check for the above behavior.
Amends aa4a1006cb
Pick-to: 6.1
Fixes: QTBUG-92361
Task-number: QTBUG-88763
Change-Id: Iae806024ddd5cf10cfe58ddbcebd2818084b0bd7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
