We already had code to handle attributes on funtcions, but we didn't
handle them correctly for classes so far.
Fix this by simply skipping over the attribute.
Fixes: QTBUG-105310
Pick-to: 5.15 6.2 6.3 6.4
Change-Id: Ic4149f940e74820de4f2fa9540d9dc5b4e626a3a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Added new setContent() overloads, that:
- take parameter of new ParseOptions enum type for specifying the parse
options that can be used for enabling namepsace processing and, in
future, whitespace-only text nodes, etc.
- use ParseResult for returning the information about error message,
line and coulmn number, instead of three parameters for each.
- use QAnyStringView for a QString input data.
To avoid ambiguities when calling setContent() with one argument,
removed the default argument for errorString from all the overloads.
[ChangeLog][QtXml][QDomDocument] Added new setContent() overloads that
allow specifying different parse options through ParseOptions flags.
These overloads use a new ParseResult struct for returning the
information about an error, and QAnyStringView for passing string input.
[ChangeLog][QtXml][QDomDocument][Potentially Source-Incompatible Changes]
setContent() overloads that take only one argument now return
ParseResult instead of a bool. ParseResult explicitly converts to bool,
so the expressions calling setContent() with one argument will continue
compiling, if they are contextually convertible to bool. If an implicit
convertion is required (e.g. bool b = doc.setConetnt(data)), the result
needs to be explicitly converted to bool first
(e.g. bool b = bool(doc.setConetnt(data)).
Task-number: QTBUG-104507
Change-Id: If6a78f8c9b1458f0e3ae719bfd3703a0b965449c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When tst_QDateTime::fromStringStringFormat_localTimeZone_data() skips
due to feature timezone being undefined, it should report that as the
issue, rather than claiming the system doesn't support the particular
zones used in the test.
Change-Id: I9837ac95c6d92317fbec7fcca184f7b7e6f81441
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also document the (seldom helpful) handling of over-long repeats of a
format. Add test to QDateTime and amend QLocale test.
[ChangeLog][QtCore][QDateTime] Doubling the 'z' format in a date-time
or time format string now produces the same output as a single 'z'.
Previously, this would have produced two copies of the milliseconds
field (eliding any trailing zeros in each). Contrast with 'zzz', which
produces the full milliseconds field, including any trailing zeros.
Change-Id: I4c60462b062fee4079370096d745c191c1939506
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Microsoft recommends to use CoInitializeEx()
and SetWindowLongPtr()/GetWindowLongPtr() in new code.
Use COINIT_DISABLE_OLE1DDE to avoid overhead of
initializing and using obsolete technology.
Pick-to: 6.4
Change-Id: I9d16943e864d4487dd4f46fd9325579c298c52b9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Add an option to limit the number of tests for building and testing
Android multi-ABI configurations in CI. Currently only Core tests
supposed to run.
Change-Id: Ibb8a41d60d108259ef2675ec54bde2482f87c8b2
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The rewrites in a1c34d8bd0,
0f76e55bc4 and in commit
b73ab954df didn't do this right, though no
problem ended up happening. In particular, the constructor one failed to
check if there were even more parameters.
Change-Id: I6f936da6f6e84d649f70fffd1706f827ba635584
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Commit 3695b35dfc accounted for pointer to
other incomplete types, but pointer-to-void was missed. This caused an
inconsistency in the stored metatype for void*, which is a built-in type
(QMetaType::VoidStar) but no pointer was recorded.
The test in tst_moc hadn't been enabled because the functions in
questions weren't extracted by moc. That is fixed in this commit.
Change-Id: I6f936da6f6e84d649f70fffd1706f613517a75fb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
...by removing the entire adjustedFormat() helper.
Qt Quick has never used this, which indicates it is not that
useful. Same goes for Qt Multimedia or Qt 3D. Ensuring depth and
stencil is requested is already solved by using
QSurfaceFormat::setDefaultFormat() or by adjusting the formats
everywhere as appropriate.
The helper function's usages are in the manual tests that use it as a
shortcut, and in the GL backend itself. Remove it and leave it up the
client to set the depth or stencil buffer size, typically in the
global default surface format. (which in fact many of the mentioned
manual tests already did, so some of calls to
window->setFormat(adjustedFormat()) were completely unnecessary)
By not having the built-in magic that tries to always force depth and
stencil, we avoid problems that arise then the helper cannot be easily
invoked (thinking of widgets and backingstores), and so one ends up
with unexpected stencil (or depth) in the context (where the GL
backend auto-adjusts), but not in the window (which is not under
QRhi's control).
It was in practice possible to trigger EGL_BAD_MATCH failures with the
new rhi-based widget composition on EGL-based systems. For example, if
an application with a QOpenGLWidget did not set both depth and stencil
(but only one, or none), it ended up failing due to the context -
surface EGLConfig mismatches. On other platforms this matters less due
to less strict config/pixelformat management.
Pick-to: 6.4
Change-Id: I28ae2de163de63ee91bee3ceae08b58e106e1380
Fixes: QTBUG-104951
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Problem description:
--------------------
Assume we have two properties, P1 and P2. Assume further that we assign
a binding to P2, so that it depends on P1. Let the binding additionally
capture some (non-QProperty) boolean, and only create the dependency to
P1 if the boolean is true.
The state afterwards is
P1:[p1vaue|firstObserver]
|
|
v
---[p2binding]
/
P2:[p2value|binding]
If the boolean is set to false, and P1 changes its value, we still
correctly re-evaluate the binding and update P2's value. However, during
binding evaluation we will notice that there is no further dependency
from P2 on P1, and remove its observer.
The state afterwards is
P1:[p1vaue|firstObserver=nullptr]
---[p2binding]
/
P2:[p2value|binding]
Then, during the notify phase, we traverse the observer's again,
starting from P1's firstObserver. Given that it is nullptr now, we never
reach P2's binding, and thus won't send a notification from it.
Fix:
----
We store a list of all visited binding-observers (in a QVarLengthArray,
to avoid allocations as long as possible). After the binding evaluation
phase, we then use that list to send notifications from every binding
that we visited. As we already have a list of all bindings, we no longer
need to recurse on binding-observes during the notification process;
instead, we only need to deal with static callbacks and ChangeHandlers.
The pre-existing notification logic is still kept for the grouped update
case, where we already have a list of all delayed properties, and should
therefore not encounter the same issue. Unifying its codepath with the
existing logic is left as an exercise for a later patch.
Fixes: QTBUG-105204
Task-number: QTBUG-104982
Pick-to: 6.4 6.3 6.2
Change-Id: I2951f7d9597f4da0b8560a64dfb834f7ad86e757
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sami Shalayel <sami.shalayel@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We pass a pointer to uninitialized memory to QMetaType::create().
There's no harm because we're using the invalid QMetaType, but GCC is
actually right to complain for any other type.
qtestcase.h:54:25: warning: ‘buf’ may be used uninitialized [-Wmaybe-uninitialized]
qmetatype.h:454:11: note: by argument 2 of type ‘const void*’ to ‘void* QMetaType::create(const void*) const’ declared here
Pick-to: 6.3 6.4
Change-Id: I3859764fed084846bcb0fffd1703eb7967acf0d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QRegularExpression::match (and globalMatch) is currently overloaded
for QString and QStringView. This creates a subtle API asymmetry:
QRegularExpression re;
auto m1 = re.match(getQString()); // OK
auto m2 = re.match(getStdU16String()); // Dangling
This goes against our decision that every time that there's a possible
lifetime issue at play, it should be "evident". Solving the lifetime
issue here is possible, but tricky -- since QRegularExpression
is out-of-line, one needs a type-erased container for the input
string (basically, std::any) to keep it alive and so on.
Instead I went for the simpler solution: deprecate match(QStringView)
and introduce matchView(QStringView) (same for globalMatch). This
makes it clear that the call is matching over a view and therefore
users are supposed to keep the source object alive.
Drive-by, remove the documentation that says that the QString
overloads might not keep the string alive: they do and forever will.
[ChangeLog][QtCore][QRegularExpression] Added the matchView()
and globalMatchView() functions that operate on string views.
The match(QStringView) and globalMatch(QStringView) overloads
have been deprecated.
Change-Id: I054b8605c2fdea59b556dcfea8920ef4eee78ee9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the QMetaMethodPrivate::invokeImpl() function we added in the last
commit, without recreating the method signature. Instead, only do a
comparison on the method name and allow invokeImpl() to decide whether
this method can be called with the given arguments. This will allow
invokeImpl() to have more flexibility in deciding if the arguments match,
using the stored metatype information.
Change-Id: I36b24183fbd041179f2ffffd17021a86484bfab6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This adds an internal method to QMetaMethodPrivate to do the work of
actually placing the call on a given meta method. This rewrite should
make the code clearer, but make no otherwise perceptible difference in
behavior.
The next commit will rewrite QMetaObject::invokeMethod to use this new,
internal function to avoid doing a lot of string allocations.
Change-Id: I36b24183fbd041179f2ffffd170219c0deaaf7f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The certificate was updated recently and doesn't have the same
deprecated hash functions and small key size as the old one did.
Change-Id: I301ad50a96a30483b92a6e30f61e78e8d6b955ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is in use in tst_qdbusinterface.cpp, so let's have it here to make
sure it works:
QVERIFY(QMetaObject::invokeMethod(&iface, "ping",
Q_RETURN_ARG(QDBusVariant, retArg),
Q_ARG(QDBusVariant, arg),
Q_ARG(QDBusVariant, arg2),
Q_ARG(QDBusVariant&, retArg2)));
Change-Id: I36b24183fbd041179f2ffffd170271424c048292
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We should fail to even find the method. `QString' and `QString&` are not
compatible.
Change-Id: I36b24183fbd041179f2ffffd170259bcf07fd459
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The type MyUnregisteredType needs to be only forward-declared for the
trick to work. The issue is not about registration, because since commit
fa987d4441 ("MetaObject: Store the
QMetaType of the methods"), we will record the meta type of the type
anyway, which will eventually allow the meta object to actually find
this type.
Instead, the tests are valid for a type that is only forward-declared.
Change-Id: I36b24183fbd041179f2ffffd1702182746f7c1b2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
In one of the three calls to customConstruct() -- QVariant::detach() --
we've already checked that the type is valid, so don't re-emit the
warning there.
Change-Id: I3859764fed084846bcb0fffd1703a3c7c0fb3164
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We can implement the trivial {default,copy,move} construction outselves
inside qmetatype.cpp and qvariant.cpp, simplifying the QMetaType
interface object, removing up to three relocations per QMTI.
This adds the testing for QMetaType::isXxxConstructible and
isDestructible that couldn't be added before.
Change-Id: Ic44396b31ba04712aab3fffd16ff0a28f541d507
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This also rewrites QMetaType::id() on top of the helper, with the benefit
of calling a member static function, so QMetaType doesn't need to be
spilled onto the stack. In some upcoming changes I need to ensure that
QMetaTypes are registered so they can be found by name and I'd like to
have a dedicated function name for that, instead of calling .id().
Since I needed to add docs for the new function, I've updated for the
old one too.
[ChangeLog][QMetaType] Added QMetaType::registerType() and an overload
of qRegisterMetaType() taking QMetaType (the two functions do the same
thing). These two functions ensure a given QMetaType is registered with
the Qt global registry, so they can be found by name later. Using
qRegisterMetaType<T>() also accomplishes the same thing, but is slightly
better for completely generic code because it will avoid emitting the
registration for built-in types.
Change-Id: I3859764fed084846bcb0fffd170351d606034c22
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's not registered until an ID is assigned.
Pick-to: 6.4
Change-Id: I3859764fed084846bcb0fffd17034f5b369c5b4d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The cause is that the first EXPOSE event comes with the window not
having focus yet. See QTBUG-105177.
Also remove processEvents() as events are always processed when doing
qWaitFor...().
Task-number: QTBUG-105177
Change-Id: I2260d1885388bbf7091c423bc9b4c16e2ed0090f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously the failure was been ignored because of the very generic
"linux" entry in the BLACKLIST file
Task-number: QTBUG-105201
Change-Id: I6914fe350f78266fc18541eb8fcd881f5a4ac511
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
+ I could not reproduce the flakiness on OpenSUSE Tumbleweed.
+ No significant flakiness can be seen for this test in our testresults
statistics.
+ Ubuntu-16.04 is no longer part of our CI
Change-Id: I7a18fc3fe2e58af8533171ebae0457b08424e810
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The cause is that the first EXPOSE event comes with the window not
having focus. See QTBUG-105177.
Fixes: QTBUG-67254
Task-number: QTBUG-105177
Change-Id: I04789d0a173979d9a60893989f76566b617c6576
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
There was an explicit int cast in fromBase64Encoding() which was never
ported to qsizetype and therefore truncated the result.
Fix by removing the int cast.
Add a test, optimize it for as low memory usage as possible, given we
need to work in input and output data each in excess of 2GiB.
Fixes: QTBUG-104985
Pick-to: 6.4 6.3 6.2
Change-Id: I9c0924957e62e5cb3003132cd811b8b0315d8ac1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The skipcleanup and failcleanup tests were actually testing skip and
fail in cleanupTestCase(), not in cleanup(). Add almost-duplicate
tests and clean up so that we now have {fail,skip}cleanup(,testcase}
tests to cover all four cases. Generated expected output. The new
tests (with old names) get their fail or skip - during cleanup() -
reported against the test instead of the cleanupTestCase function.
(Results for {init,cleanup}TestCase() are always reported, even when
these slots are not defined, as no-op passes.)
Pick-to: 6.4
Change-Id: I0988d1696b50c0e2f30c45ddc25e1bd0bfd2151a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
So long as you only ask us to copy it. Copying is mandatory, though.
I'll firm up the warning in a later commit, which may not get cherry-
picked as far back.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-105140
Change-Id: I3859764fed084846bcb0fffd170432abf65dc197
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Before a recent fix it would happen occasionally that
lastNormalizedPositions.at(0) would segfault because the list was
empty. The cause of the flakiness was fixed, but make the test more
resilient anyway by checking first the list is correctly populated.
Furthermore on some platforms this check fails:
qAbs(leftWidget.lastNormalizedPositions.at(1).x() - 0.8) < 0.05
So instead of QVERIFY use QCOMPARE_LT to print the values when it fails.
Task-number: QTBUG-104268
Change-Id: Id5430eb53c133cf5d23647cfd9749f01f266efce
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Sometimes XCB_EXPOSE event is being propagated twice, once before and
once after qWaitForWindowExposed(). But the window has focus only after
the second expose event. Changing it to qWaitForWindowActive() fixes the
issue.
Fixes: QTBUG-104268
Pick-to: 6.2 6.3 6.4
Change-Id: Ibc78dd4958ed1a4a8d0967b29d2a53457ab9ae8b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
And fix all the new warnings.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: I2a5791f495575d71d2344429aca3363f9922e31b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The QTextFormat::FontFamily enum is deprecated since Qt 6.0, however it
is still used in the code.
To retain backward compatibility with the old data stream formats, we
introduce a new internal QTextFormat::OldFontFamily enum value, which
has exactly the same value as QTextFormat::FontFamily, and use it
instead.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf5258b621c2b0aa507005dfe2c1e80c26ddb0d4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... when QT_DISABLE_DEPRECATED_BEFORE is past the deprecation version.
This commit actually stops using the deprecated signals when we build
Qt with QT_DISABLE_DEPRECATED_BEFORE >= 0x060000. Otherwise we will
get a compilation error because the signals will be removed.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ie513ecc9451bf2d88f80857cf19f3d2b4958d022
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When the method is wrapped into
if QT_DEPRECATED_SINCE(MAJ, MIN)
we also need to add QT_DEPRECATED_VERSION_[X_]_MAJ_MIN macro right in
front of the method declaraion, to actually trigger a deprecation
warning.
This patch does that for QCursor's deprecated methods, and fixes all
related compilation warnings in QtBase.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ic8d059e8c852d4b2dee55e7ea94f4fc7a402cdf4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If the metatype does not support copy and default construction, then it
it unsuitunsuitable for use in QMetaType. We cannot prevent users from
passing in such metatypes (as we have e.g. a ctor taking QMetaType), so
verify this in customConstruct, and make the variant invalid in that
case.
Pick-to: 6.2 6.3 6.4
Change-Id: Ib1f0149c8fb9a1cce0049fd0311980754cc85d1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
- add move special member functions (docs copied from QHostInfo)
- add member swap
- use move-and-swap, not pure-swap, because these objects hold
resources (handles) other than just memory
- Q_DECLARE_SHARED (it's not implicitly shared, but explicitly)
- adds ADL swap and Q_DECLARE_TYPEINFO
[ChangeLog][QtOpenGL][QOpenGLBuffer] Added member-swap(), move
constructor, move assignment operator.
Change-Id: I22dc92108bdd393fff4361db23e94eaf3d7ea9cc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The tst_QByteArray test redefines the QCOMPARE macro to check the LHS
to be NUL-terminated. Because the code was never ported from int to
qsizetype, it fails for QByteArrays of size > 2GiB.
Fix by porting to qsizetype.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104985
Change-Id: Ib3951b0efed5f734ae1324ea2d455bb7762fb9c4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Or the previous limit, 10.
The test has a flaky and failing history, esp on macOS. Trying to
provoke race conditions with more threads than we have cores has little
value.
Pick-to: 6.4
Change-Id: I99dd2b5a6f64faa83963c279c84fc547416f914f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That test has a very flaky history on Windows 11, presumably because
there are even more fade-in/out effects. Wait longer for those to
finish.
Fixes: QTBUG-102239
Pick-to: 6.4 6.3 6.2
Change-Id: I1d59f4422469e60a8c4dc5a52c48f0344e954491
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
OpenSSL v3 fails to set server's certificate, complaining that
"md is too weak".
Pick-to: 6.4 6.3 6.2 5.15
Fixes: QTBUG-49205
Change-Id: Ib21b10ff13bc2621ae2aaaab962efaaf77a854bc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
a61bf508e3 reduced the tolerance from 4 to
3 in one case, making the test more rather than less flaky on systems
with a device-pixel-ratio of 1.
Pick-to: 6.4 6.3 6.2
Change-Id: I245443f0dcb1aa40176c127025501b63f12f161b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Amends 1d961491d8. We modify the resolve
mask after making a shared copy of 'other', so we must detach. Call the
setter designed for that purpose.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-98762
Change-Id: I4f45223e74764a341378992172787fae73efb8b7
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Deal with the case that the object gets deleted between a call to
moveToThread and the start of the thread by removing the object from the
list in that case.
Fixes: QTBUG-104014
Pick-to: 6.4
Change-Id: Ib249b6e8e8dfbc4d1332bb99a57fa9d3cff16465
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We set Qt::X11BypassWindowManagerHint on the view, which regularly makes
the test fail on X11 systems in the
QVERIFY(QTest::qWaitForWindowActive(dummyView.data()))
check.
If the view fails to show, skip the test instead of failing, we are not
testing anything X11 specific here, running this test on other platforms
will be good enough.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-98921
Change-Id: I46dbcddf51ee1e92eb3bbb29bb57fcc314266bea
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The test already accepts an error margin for coordinate mapping. It is
still flaky, so make that margin larger if the DPI of the widget >1.
Pick-to: 6.4 6.3 6.2
Change-Id: I0a598e5e94ac82c551cbeb935e2fa08cad048f84
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If the cached font has a different DPI than the one used in
QPainter, we need to treat this the same as if other font
properties have changed and redo the layout.
This happened when running the QStaticText test on Wayland,
because the default dpi was 100 and the QPixmap we ended up
drawing to was 96. This caused the pixel size of the font to
be calculated differently when doing drawText() (using 96 dpi)
and drawStaticText() (using the cached 100 dpi).
Pick-to: 6.4
Fixes: QTBUG-100982
Change-Id: Ie4270341bb8a64b6458eb67ba460a282c65dc26b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Running this test on Wayland passes for me, so maybe something
has magically improved.
Change-Id: I161b697c5be96af48938228267cb405048c78852
Reviewed-by: Inho Lee <inho.lee@qt.io>
This example connects an echo server running behind
WebSockify, on localhost.
For example, start websockify with
websockify 1515 localhost:1516
to accept a webscoket connection on 1515 and forward
to echo_server at 1516.
Pick-to: 6.4
Change-Id: Id71364e4ab8c46d3482b515fcd1b991b61d7404b
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Use a signal spy to watch for the relevant signal from the file system
model and wait for that before checking whether the completer responded
to that signal by showing (or not showing) the popup.
If the file system model doesn't fire within the default timeout of 5
seconds, skip the rest of the test.
Fixes: QTBUG-46113
Pick-to: 6.4 6.3 6.2
Change-Id: I9becfe19a220bdb178ed8275c327d55ea19aa342
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test has timed out when run on ARM in qemu. We start more threads
than the ideal count, which is likely too much for the emulator when not
running the native architecture.
Pick-to: 6.4
Change-Id: I42e11945070646551e77c10618df762a4bffc8ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For built-in types, this is a compile-time assert - we should not have
any types in Qt for which we have neither debug streaming nor a
QTest::toString specialization implemented. A build of most of Qt
submodules passes with this change, after minor modifications to some
tests. We cannot declare QSizeHint::Policy as a metatype after the
QMetaType has already been instantiated for it, and the QDebug stream
operator for QElaspedTimer needs to be correctly declared within the
namespace.
Add a self-test function for a custom type, and update reference files
of the self-test.
Task-number: QTBUG-104867
Pick-to: 6.4
Change-Id: I2936db5933f4589fce45f47cf2f3224ed614d8c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Wayland does not support window activation, so rather than skipping
tests based on platform name, we can use the platform capability
(which will also cover future platforms with the same issue)
Pick-to: 6.4
Task-number: QTBUG-104241
Change-Id: Ibf5f8968f3979b789ef68f92768419bef4500fb3
Reviewed-by: Inho Lee <inho.lee@qt.io>
If we create a QThread from QThread::current(), we want it to have a
correct value for its bindingStatus. Thus, initialize bindingStatus in
the ctor of QAdoptedThread.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4 6.3
Change-Id: I3ef27ed62c5dc25eed05d551c72743a1b8528318
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Connects to echo_server via websockify, like the async version.
Pick-to: 6.4
Change-Id: I9ed560cd388cfddbd0d284d8d40fb7ddf964ba96
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Use QThread::idealThreadCount instead. This requires that we use
QVarLengthArray, as MSVC doesn't allow us to allocate arrays with a
non-constexpr size on the stack.
By using as many threads as the system has cores, we are more likely
to detect race conditions reliably. On systems with fewer cores (in
particular on qemu platforms like QNX, where this test has been
failing a lot), we'll less likely end up with false negatives due
to timeouts.
Pick-to: 6.4 6.3 6.2
Change-Id: Ie8631aef544ca7b53c06a0729d05459016745486
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some of the offsets are already quint32 in the API (vertex input
attributes, dynamic offsets, offsets in draw calls), matching the
reality of the underlying 3D APIs, but many buffer-related functions
use int as of now, simply because that used to be the default choice,
and the same goes for sizes (such as buffer or range sizes). This is
not quite consistent and should be cleaned up if for nothing else then
just to make the classes consistent, but also because no 3D API use a
signed type for offsets, sizes, and strides. (except OpenGL for some)
When it comes to strides (for vertex inputs and raw image texture
uploads), those are already all quint32s. This is straightforward
because most of the 3D APIs use 32-bit uints for these regardless of
the architecture.
Sizes and offsets are often architecture-dependent (Vulkan, Metal),
but there is at least one API where they are always 32-bit even on
64-bit Windows (UINT == unsigned int, D3D11). In addition, we do not
really care about buffer or texture data larger than 4 GB, at least
not without realistic use cases and real world testing, which are
quite unlikely to materialize for now (esp. since we still have the
width/height of 2D textures limited to 16 or 32K in many cases even on
desktops, whereas 2GB+ buffers are not guaranteed in practice even
when an API seemingly allows it).
In any case, the important change here is the signed->unsigned
switch. A number of casts can now be removed here and there in the
backends, because the offsets and sizes are now unsigned as well,
matching the underlying API reality. The size can be potentially
increased later on with minimal effort, if that becomes necessary for
some reason.
Change-Id: I404dbc365ac397eaeeb3bd2da9ce7eb98916da5f
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Allow specifying the Java class on which to set/get the field via its
corresponding C++ type, removing the need to explicitly provide the
Java type string.
Those were missing from a085a14d76, which
was noticed when porting QtConnectivity over to the new template APIs.
Pick-to: 6.4
Change-Id: I8f324c9fcc486b4c6c2f2b9051f7eca0cbec0e91
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The iBridge interface is used for the keyboard touch bar, and the Apple
Wireless Direct Link interfaces are used by Apple for various purposes.
Setting up a server on these interfaces does not work.
Only the tst_QTcpServer::linkLocal unit test on macOS is affected by
this change.
Fixes: QTBUG-103892
Change-Id: I29701ce51d5e40dff6c59547a8639c1fba330d36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMetaTypeInterfaceWrapper tries to find the metaObjectFunction using
the MetaObjectForType template. Using SFINAE, for a QObject, it should
resolve to a suitable specialization.
Such a specialization doesn't yet exist. It had to be created.
The following path returns nullptr for registered meta types:
auto metatype = QMetaType(typeId);
requestedTestType.metaObject() -> returns nullptr since a bad template
argument is fed to MetaObjectForType<T> in
QMetaTypeInterfaceWrapper<IneritingFromQObject>::metaType's static initializer.
Change-Id: I8b31c51e12cb19c333e00480b0177354b910ce1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Port the constructor and addData() method to QAnyStringView, but keep
the overloads taking a QByteArray to avoid extra copies when actual
QByteArray is passed. These overlaods need to be Q_WEAK_OVERLOADs, to
avoid ambiguities (e.g. for const char * arguments).
Additionally, add a test to make sure the patch doesn't break parsing
from a QLatin1StringView input.
[ChangeLog][QtCore][QXmlStremReader] Added constructor and addData()
overloads taking QAnyStringView.
Change-Id: I0efaab82a2123271c88407e380f3c67d1099a4a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since wasm doesn't like filesystems that well, we omit this test in
tst_qchar for wasm, this allows us to still run the test without the
case where it needs to read the normalization file.
Change-Id: I37e54d97e119f94e1a9ca53917d0b93183321899
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
- QFileInfo::fileName() is not the name of a directory, so we need
absoluteFilePath() to construct a QDir
- QDir::entryList() returns only the name suffix, not the whole path
- stop at any arbitrary depth, and add a find command which does full
recursion
Amends 04a5a74685
Change-Id: I9870db092125a797e8b654e98954ac611dde1ab2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QString has several functions taking a QRegularExpression: indexOf(),
contains(), and so on. Some of those have an out-argument of type
QRegularExpressionMatch, to report the details of the match (if any).
For instance:
QRegularExpression re(...);
QRegularExpressionMatch match;
if (string.contains(re, &match))
use(match);
The code used to route the implementation of these functions through
QStringView (which has the very same functions). This however opens
up a lifetime problem with temporary strings:
if (getString().contains(re, &match))
use(match); // match is dangling
Here `match` is dangling because it is referencing data into the
destroyed temporary -- nothing is keeping the string alive. This is
against the rules we've decided for Qt, and it's also asymmetric with
the corresponding code that uses QRegularExpression directly instead:
match = re.match(getString());
if (match.hasMatch())
use(match); // not dangling
... although we've documented not to do this. (In light of the decision
we've made w.r.t. temporaries, the documentation is wrong anyways.)
Here QRE takes a copy of the string and stores it in the match object,
thus keeping it alive.
Hence, extend the implementation of the QString functions to keep a
(shallow) copy of the string. To keep the code shared as much as
possible with QStringView, in theory one could have a function taking a
std::variant<QString, QStringView> and that uses the currently active
member. However I've found that std::variant here creates some abysmal
codegen, so instead I went for a simpler approach -- pass a QStringView
and an optional pointer to a QString. Use the latter if it's loaded.
QStringView has some inline code that calls into exported functions, so
I can't change the signature of them without breaking BC; I'm instead
adding new unexported functions and a Qt 7 note to unify them.
Change-Id: I7c65885a84069d0fbb902dcc96ddff543ca84562
Fixes: QTBUG-103940
Pick-to: 6.2 6.3 6.4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before 0681a2dd5a, QCOMPARE'ing types
for which no QTest::toString specialization exists did not output
Actual and Expected lines on failure, as that would only print <null>
for both values (which then look like the same value, confusingly).
Commit 0681a2dd5a changed that behavior,
and started printing the confusing <null> values.
Take care of the logic in the formatFailMessage function: if both values
are nullptr, then print only the variable names, but not the confusing
<null> text representation of the values.
Remove dead and duplicated code related to the formatting logic, add a
self-test function, and update the expected_cmptest files.
Fixes: QTBUG-104867
Pick-to: 6.4
Change-Id: I4be98e79f91196b14690a2cc0a68ffd50b431a45
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Different shortcut editors seem to have different preferences. By
default, QWidget seems to utilise Tab, Backtab, Return and Enter for
navigation purposes. However, some shortcut editors would like to be
able to record these keys as part of combinations to use in the
application.
Therefore, leave it with the application developers to decide what key
combinations they would like to use for finishing the key sequence edit.
This should provide enough flexibility for application developers to
customize their shortcut editor behavior.
[ChangeLog][QtWidgets][QKeySequenceEdit] Added a property to allow
defining the finishing key combinations.
Fixes: QTBUG-103844
Fixes: QTBUG-103843
Change-Id: Id84644086ca7a4f11618d510e59698a43735b99b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's needed in QtHttpServer.
[ChangeLog][QtCore][QDebug] Can now stream QMetaType.
[ChangeLog][QtCore][QMetaType] Can now be streamed through QDebug.
Change-Id: I974d77d678137715472a3907ab1e50ba2dbaa087
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
56bd1b76d2 changed the update
resolve mask behavior in QPalette to avoid detaching brush data
when modifying the resolve mask if the brush value is not changed.
But this behavior broke compatibility, it introduced unknown risks, and
we cannot ensure that other code in Qt does not depend on the old
behavior.
We both need to ensure that we don't detach when the value is not
changed, and ensure that the resolveMask is always updated regardless
of whether the value changes, so we need to split them up and
independently share the brush data.
QFont will update its corresponding resolveMask even if the value has
not changed, so it is better to correct this behavior so that QPalette
and QFont are consistent.
[ChangeLog][QtGui][QPalette] Always update resolve mask in
QPalette::setBrush, even if the value of brush has not changed.
Fixes: QTBUG-98762
Pick-to: 6.4 6.3 6.2
Change-Id: Ib845361b30f21c3d78c16ced923c1678b12e05ac
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In Qt 6.3, a check for WA_InputMethodEnabled was removed
in QWidget, to support IM queries also for read-only
widgets (7c6e4af48). This caused a regression on iOS, which
made the input panel open for widgets that didn't support
IM at all.
A patch was merged that solved the regression (3b12305575),
but it didn't take the widget attribute into account.
Since not doing so has the potential to cause regressions,
this patch will modify the affected code once more, so that
we instead fall back to test WA_InputMethodEnabled when
ImEnabled is not implemented. This will match closely
to the way ImEnabled was implemented in Qt 6.2.
Since we, with this change, now require that either ImEnabled
or WA_InputMethodEnabled is set, our own input widgets will
fail to support IM text selection when they're read-only, since
they actually don't implement ImEnabled.
This patch will therefore also make sure that we do so.
Task-number: QTBUG-104527
Pick-to: 6.4 6.3
Change-Id: I70ad910aec38d0a74f4dd7d3115d3c45c16d2b3b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
BINDABLE should generally behave the same as MEMBER if "WRITE default",
except where it cannot. In particular we cannot know if any NOTIFY
signal should be sent from the synthetic WRITE accessor.
[ChangeLog][QtCore] moc will now synthesize WRITE accessors for
properties with BINDABLE if you specify "WRITE default".
Task-number: QTBUG-97249
Change-Id: I883c40ba0dda7989c840971860addaeaa75a8c83
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's an opt-in warning that some people like to use. It was introduced
to clang 3.0.0 in 2011 by
98766db785
However, the feature is intentionally used here and the generated code is legit.
Make both sides happy.
Change-Id: I79335cd3a6a6cc128fa65f77d201a12f67424260
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
...that uses the old name after a recent change in the
name of a function.
Change-Id: Ife36fbb0c5d28b350cb1cfc48625528a205af8f9
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Unblock the qtdeclarative dependency update.
This behavior change is causing a regression for QQmlPreviewHandler's
zoom feature. Back out of the change for now, until we can find a way
to make both use cases work.
This reverts commit 1c0a56a2f3.
Change-Id: I1b3d84504bbcb4f2b2250a20194fdaf4ab4fd97f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This commit adds macros for declaring scoped native callbacks which are
in namespace or for example defined as static class member variables.
The existing macros don't allow this as they use QtJniMethods namespace
and the introduced callbacks' namespaces are not enclosed in that
namespace, yielding a compilation error.
Pick-to: 6.4
Change-Id: I754560bea7e9a1b57c2661d1ee7236e78db39ba1
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qdbusxml2cpp's -i option uses "" for the includes.
However, an option to include with <> would be also
desirable, since some compilers may use a different
search strategy for <> than for "".
Add a new command line option -I/--global-include
to include the given argument using <>.
The new option will be used in qtconnectivity.
[ChangeLog][qdbusxml2cpp] Added command line option
-I/--global-include to include header files with <> in
the generated files.
Fixes: QTBUG-103362
Change-Id: If8e7f8b86440bdec53f2517db1ad460912664b20
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Since we cannot rely on the clients specifying a suitable CSP that will
not forbid execution of js injections, we have to refrain from using
any explicit <script> elements. To keep the promise system working, a
thunk pool was introduced which keeps track of a limited pool of promise
callback exports. In case the resources are busy, pending calls are
enqueued. This works since the JS Promise.then/catch/finally always fire,
even on ready/failed promises.
As the situation of full thunk pool allocation is unlikely to happen
en masse IRL, the solution should not adversely affect the performance.
Heavy unit tests were created to confirm the solution works as expected.
Task-number: QTBUG-99611
Change-Id: I0e6982d4ee76a4263b59e72b004b3ff2f167e4df
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QFutureCallOutEvent is used externally, so it needs to be exported.
This reverts commit 3141a13b2a.
Fixes: QTBUG-104732
Pick-to: 6.4
Change-Id: I82c9e7414192ee948f78259bd74a404691a7805a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QT_SCREEN_SCALE_FACTORS in many cases set on behalf of the user,
instead of by the user, so we should make it less sharp and more
in line with standard high-dpi configuration.
Specifically, make it subject to the rounding policy set by
QGuiApplication::setHighDpiScaleFactorRoundingPolicy(). This
means that applications which support integer scale factors
only will see integers only, also when QT_SCREEN_SCALE_FACTORS
specifies a fractional factor.
Users who want to override can set
QT_SCALE_FACTOR_ROUNDING_POLICY=PassThrough
to restore the default Qt rounding behavior.
[ChangeLog][QtGui] The high-DPI scale factor rounding policy (settable with
QGuiApplication::setHighDpiScaleFactorRoundingPolicy() or
QT_SCALE_FACTOR_ROUNDING_POLICY) now applies to scale factors set
with QT_SCREEN_SCALE_FACTORS.
Pick-to: 6.4
Fixes: QTBUG-95930
Fixes: QTBUG-99546
Change-Id: Ibb0aa5cb9d3a356d33429d0efe69d984b2530728
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test setting both via QGuiApplication property and environment.
Change-Id: Iaccc920adb6294d610b02d4c844aa5b15eb7eecd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Implement a11y support by adding html elements of the
appropriate type and/or with the appropriate ARIA attribute
behind the canvas.
Also add a simple manual-test.
Change-Id: I2898fb038c1d326135a1341cdee323bc964420bb
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
It's always true these days, assert so in qatomic.cpp and
tst_QAtomicInteger.
Update the docs.
Pick-to: 6.4
Change-Id: I3684cff96c1d2e05677314e29514cc279bd6b1a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The promise tests have been ported to qtwasmtestlib so that they do not
have to use asyncify anymore.
Task-number: QTBUG-99611
Change-Id: Id1b5742c90e36a89540e7a2387cb4110c21ace9b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
As a preparatory measure for using showXFilePicker, the Qt file
filter has to be transformed to the format used by the showXFilePicker
(sXFP) options. A class structure reflecting the options was created. Based on
an input in the form of a qt file filter, it will parse the filter to
the sXFP options format. Unit tests were added and the code is not yet
used in non-test env, next change will use it.
Task-number: QTBUG-99611
Change-Id: I277286467a7b5ce6f323c19bdd31740a41b6a6be
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Added the functionality to report text statuses from tests, reporting
file and line of assertion failures. Refactored the qtwasmtestlib.js
for improved stability.
Task-number: QTBUG-99611
Change-Id: I717e0cc38ac7f155fe870710f6b5e4bfb81b9317
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Many algorithms (ciphers etc.) had become 'legacy' in OpenSSL v3,
meaning they are not available by default. Since we don't mess with
loading providers and don't load the 'legacy' one, we have to
skip tests involving such algorithms.
Pick-to: 6.4 6.3 6.2 5.15
Fixes: QTBUG-104232
Change-Id: Ieceabeb080e531aeb24f733cb8c83ad08a25049c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When item.height > viewport.height, the next item is not found
correctly, resulting in an infinite loop.
In this case, move directly to the next item.
Pick-to: 6.4 6.3 6.2
Change-Id: I67a40a079ca9dd9189bf84ae550758c685b83d75
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Under normal circumstances, when the second point is touched, the
first point has not been released, and the message at this time
should contain two touch points. We are simulating the case where
the message is lost when the popup is closed by touch. Amends
efc02f9cc3
Pick-to: 6.4 6.3 6.2
Change-Id: Ic722e3dbd615c46076ede26611d0107501c5e274
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Make our QRhiMemAllocStats struct a bit more generic, drop the memory
allocation part in the naming, and use the same getter and struct for
reporting some important timings. (we are free to rename for now, there
are no users in other modules yet)
The time spent in graphics (or compute) pipeline creation has a special
relevance in particular with the modern APIs (as it is the single
biggest potentially time consuming blocking operation), but also highly
interesting with others like D3D11 simply because that's where we do the
expensive source-to-intermediate compilation is HLSL source is provided.
In order to see the effects of the various caching mechanisms (of which
there can be confusingly many, on multiple levels), the ability to see
how much time we spent on pipeline creation e.g. until we render the
first view of an application can be pretty essential.
Task-number: QTBUG-103802
Change-Id: I85dd056a39db7e6b25fb1f9d02e4c94298d22b41
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The goal is to make it possible to implement QSGRhiSupport::backendName()
in Qt Quick with just a single line:
return QString::fromUtf8(QRhi::backendName(m_rhiBackend));
instead of duplicating the strings and the logic.
Similarly, QBackingStoreRhiSupport can now drop its apiName() helper
entirely.
Change-Id: Ia8cbb1f1243539ed4d7a98e71dcc2ed56b017e40
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The manually defined native JNI function tables allow defining a name
that may be different from the actual function name; this name is then
used from the Java-side.
This can be useful to provide also as an option with the new
"unstringifying" macros which can help for example in porting code
to these new macros.
Pick-to: 6.4
Change-Id: Icfebfb351cb8dfb122795d20b37e2eac167a41bf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
User code in an event handler can do arbitrary things, including
operations that lead to destroying the QWidgetWindow. An example is
what the autotest does: reparenting the top-level widget to under
another top-level upon the drop. Internally this leads to destroying
the drop target's QWidgetWindow as the widget is now a child, not a
top-level.
In fact some of the existing drag and drop handling code seems to be
prepared to handle the case of having the drag target widget destroyed
in the user's event handler during a drag-move. But none of it is
prepared for having the QWidgetWindow destroyed upon returning from
forwardEvent().
The associated bug report has the same root cause, it is just popping up
now via the new 6.4 behavior: adding a QOpenGLWidget to a widget
hierarchy upon a drop leads to getting a new QWidgetWindow (if the
window only had regular raster widgets before).
To solve this, avoid touching members on 'this' after the
forwardEvent(). It looks like the handlers for mouse events follow
this pattern already, no member data is touched after forwarding events
(not sure if that is intentional or just incidental but it is the safe
solution, even if this is not feasible everywhere, but ideally input
events should take this into account).
Fixes: QTBUG-104596
Pick-to: 6.4 6.3 6.2
Change-Id: I96c704cadcd799fc5619b776e939dfdf313a27dd
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since objectName() isn't always set, the className() makes it slightly
easier to find and fix the issue.
Also unify some wording "produce a warning", which is generic enough to
fit:
print warning in terminal
print warning in logviewer (if you're unlucky and have to use Windows?)
print warning in system journal (if you're unlucky have to use binary
systemd journal logs)
Pick-to: 6.4
Change-Id: I7522d65666cb5829c33c45039b8646dd535e21ea
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A new property Qt::ImEnabled was added in Qt 5.3.
Since the already existing widgets with IM support
(3rd party included) didn't implement this property,
QWidget got the fall back logic that if a widget
was queried for Qt::ImEnabled, and the returned QVariant
was invalid (the widget didn't implement it), we
would, for backwards compatibility with Qt 4, return "true"
(meaning that the widget supports IM).
But a side effect from this fallback logic, is that now
any widget that doesn't implement ImEnabled (or input
methods at all) report that they support IM. This will
confuse platforms like iOS, which uses ImEnabled to decide
if the input panel should show, and if text selection tools
should be enabled. The result is therefore that if you click
on a QPushButton, the input panel will open.
This patch will implement a more careful strategy to check if
a widget implements IM, if ImEnabled is missing. Rather than
saying that all widgets that don't implement ImEnabled supports
IM, we now require that the widget also returns a valid QVariant
for Qt::ImSurroundingText. We assume then, that a widget that
doesn't do so will anyway not be in need of input method support
from the platform.
Fixes: QTBUG-104527
Pick-to: 6.4 6.3 6.2
Change-Id: Ib391fd1daae92c4325e9ccb59730fbdd7c9328fc
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Currently, to use a promise from C++ we either have to use an ASM block
(which does not work well with dynamic linking) or declare exports in
the EMSCRIPTEN_BINDINGS block, which is cumbersome and cannot be chained.
This solution makes it easy to use js promises by introducing the
WebPromiseManager which dispatches callbacks to appropriate callers when
available.
This is a preliminary patch for FileSystem support, which will heavily
use async APIs.
Task-number: QTBUG-99611
Change-Id: I368a8f173027eaa883a9ca18d0ea6a3e99b86071
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
qtwasmtestlib supports writing asynchronous tests for
the web platform.
Asynchronous test functions differ from normal test
functions in that they allow returning from the test
function before the test has completed:
void TestObject::testTimer()
{
QTimer::singleShot(100, [](){
completeTestFunction(); // Test pass if we get here
});
}
Currently one logging backend is supported which
writes the results to an html element. See the README
file for further documentation.
Change-Id: Ia633ad3f41a653e40d6bf35dd09d62a97c608f84
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Previously trying to execute a test function with an unknown data tag
would print an error message but exit with 0.
This patch stores a test failure, and continues trying to execute the
rest of the command line arguments, if any. In the end the process exits
with the usual exit code (number of failed tests) which is now !=0.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-24240
Change-Id: Id4d422035f173e01e77ca88028dfd94dc0f9085c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This convenience should be, according to the Apple docs, equivalent to
calling present from a scheduled handler. (which on its own makes it
unclear why we switched in the first place)
In practice it seems the two approaches are not identical. It looks
like that once a frame is submitted earlier than the next display link
callback, the throttling behavior we implement in beginFrame()
(waiting on the semaphore for the completion of the appropriate
command list etc.) starts exhibiting unexpected behavior, not
correctly throttling the thread to the refresh rate. Changing back to
presentDrawable does not exhibit this at all.
The suspicion is that presentDrawable is probably doing more than what
the docs suggest, and so is not fully equivalent to calling present
manually from a scheduled handler.
Therefore, switch to presentDrawable now, which restores the expected
cross-platform behavior, but make a note of the oddity, and also
prepare the hellominimalcrossgfxtriangle manual test to provide an
easy, self-contained application to allow experimenting in the future,
if needed.
This allows Qt Quick render thread animations to advance at the
expected speed (because the render thread is correctly throttled to
the refresh rate), even if the render thread decides to generate a new
frame right away, without waiting for the next display link update.
Without this patch, attempting to get updates not via requestUpdate(),
but by other means (timer etc.) leads to incorrect throttling, and so
the triangle in the test app is rotating faster than expected - but
only with Metal. Running with OpenGL on macOS or with any API on any
other platform the behavior will be correct. Even if scheduling
updates without display link is not efficient, and should be
discouraged, not doing so cannot break the core contract of vsync
throttling, i.e. the thread cannot run faster just because it renders
a frame not in response to an UpdateRequest.
Amends 98b60450f7 (effectively reverts
but keeps the code and the notes because we might want to clear this
up some day)
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-103415
Change-Id: Id3bd43e94785384142337564ce4b2644bf257100
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The siginfo_t parameter allows us to show what process sent a signal or
the crashing address. Additionally, it allows us to determine if the
crashing signal was indeed sent due to a crash.
The selftest tst_crashes produces now:
$ QTEST_DISABLE_STACK_DUMP=1 ./crashes
********* Start testing of tst_Crashes *********
Config: Using QtTest library 6.4.0, Qt 6.4.0 (x86_64-little_endian-lp64 shared (dynamic) debug build; by GCC 11.2.1 20220420 [revision 691af15031e00227ba6d5935c1d737026cda4129]), opensuse-tumbleweed 20220428
PASS : tst_Crashes::initTestCase()
Received signal 11 (SIGSEGV), code 1, for address 0x0000000000000004
Function time: 0ms, total time: 0ms
[1] 201995 segmentation fault (core dumped) QTEST_DISABLE_STACK_DUMP=1 ./crashes
The last line comes from the shell. The code isn't decoded, but on Linux
it's a SEGV_MAPERR. macOS prints exactly the same thing.
I've updated one of the expected_crashes_*.txt output that doesn't seem
possible (the "Received a fatal error" message does not appear in Qt
anywhere).
Pick-to: 6.4
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16ebc8391234f0e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
At the very least, it would be important to have a single combination
key sequence. This is commonly seen in keyboard shortcut editors where
QKeySequenceEdit is very much applicable.
[ChangeLog][QtWidgets][QKeySequenceEdit] Added a maximumSquenceLength
property.
Done-with: Marc Mutz <marc.mutz@qt.io>
Change-Id: Id7fa5a8593eb150fa67d7e89308492c0a200ac36
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
On some machines having an empty path passed to QDBusInterface
would cause a crash.
This happened because the code created a QDBusMessage and manually
marked it as validated when it was not. The validation would not
pass for this object.
Change-Id: I496dd922fa64353399655a1e84996b99990f5879
Pick-to: 6.4 6.3 6.2 5.15
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Our limit of 8k for a single header field was too small for certain
services which returned Location values or WWW-Authenticate challenges
longer than 8k.
Instead, taking inspiration from Chromium, we have a limit of 250k for
the full header itself. And increasing our field limit to 100k, which
would occupy almost half of what the total header allows.
Also took the opportunity to make it adjustable from the outside so we
can set more strict limits in other components.
Fixes: QTBUG-104132
Pick-to: 6.3 6.4
Change-Id: Ibbe139445e79baaef30829cfbc9a59f884e96293
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
You can't mismatch the export macros. The QT_MOC_EXPORT_PLUGIN_V2 macro
defines these functions as Q_DECL_EXPORT so they can be found by
QPluginLoader. We must match the macro here, otherwise GCC 12 complains
(tst_moc.cpp is compiled with -fvisibility=hidden):
tst_moc.cpp.o: non-canonical reference to canonical protected function `qt_plugin_instance' in moc_plugin_metadata.cpp.o
Pick-to: 6.4
Change-Id: Id0fb9ab0089845ee8843fffd16f99893d5730da5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When a markdown document contains a "naked" URL, or an angle-bracketed
<URL>, md4c recognizes it, and we set the AnchorHref charfmt property.
There's no need to expand it into the [text](url) form if the text is
the same as the url, there is no tooltip, and the url is valid.
QTextMarkdownWriter now writes a CommonMark "autolink" in that case:
https://spec.commonmark.org/0.30/#autolinks
[ChangeLog][QtGui][Text] QTextMarkdownWriter now writes an autolink
whenever a hyperlink has no custom text and no tooltip, including
when the document was parsed from Markdown containing a naked URL.
Pick-to: 6.4
Fixes: QTBUG-94713
Change-Id: I432db8499c62e1e0b1e913bfd8ef2147e3c2bb2a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Since 4edcea762d the dropsite example
shows markdown if available; and now it shows that when we do DnD
of a selection from the richtext example, text/markdown is available.
- If we artificially make html unavailable, copying and pasting between
widget-based rich text editors uses markdown.
In case markdown writer output contains unnecessary backticks due to
monospace fonts getting used, the workaround from
1ad456c908 is applied.
Pick-to: 6.4
Task-number: QTBUG-76105
Task-number: QTBUG-103484
Change-Id: Ie6ca4dbb450dbc36b3d09fd0df1ae5909aaebca7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This was unblacklisted in b885820c39
however it is still very flaky.
Change-Id: If9796231c584c894387106dfeb262c9eb4ce73f5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We had the code to calculate the length, but were improperly using it
only for the offset, not the length of the string or its containing
array. That resulted in the generated moc output containing:
QT_MOC_LITERAL(111, 5), // "\xffz"
QT_MOC_LITERAL(114, 5), // "\0012"
QT_MOC_LITERAL(117, 23), // "slotWithAReallyLongName"
The two strings are described as occupying 5 bytes (length 4 + null
terminator), which is incorrect. The offset was correct: 114 - 111 = 3
and 117 - 114 = 3. The new output is:
QT_MOC_LITERAL(111, 2), // "\xffz"
QT_MOC_LITERAL(114, 2), // "\0012"
QT_MOC_LITERAL(117, 23), // "slotWithAReallyLongName"
The effect of the array size calculation would only be felt if moc
decided it needed a second string array (for strings over 65535 bytes),
which would cause the offsets in the second array to be all wrong. There
was no such test until now.
Drive-by fixing of the newline, indentation, and the stale comment
referring to QByteArrayData (Qt 5).
Pick-to: 6.2 6.3 6.4
Change-Id: Id0fb9ab0089845ee8843fffd16f9cd01b3e0709a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QDom's internalSubset() always returned empty because nothing
actually set the internal data member it returns. When parsing
the DECLTYPE, extract the internal subset and save it to the
doctype()'s member when present.
Pick-to: 5.15 6.2 6.3 6.4
Fixes: QTBUG-53661
Change-Id: I6e41ff8b914381168246073b3289d82205b1c255
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The behavior is similar to MEMBER: If the READ accessor is "default",
synthesize it using the bindable.
[ChangeLog][QtCore] You can now specify "READ default" in a Q_PROPERTY
if you also specify a BINDABLE. moc will synthesize a READ accessor in
that case.
Task-number: QTBUG-97249
Change-Id: I4a275adabaed12df95dac505095f847c4be65dfe
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is a repeat of commit de6ced6692
"QCborValue: fix incorrect to{Array,Map} when the value is empty" (6.4),
which fixed the same thing for QCborValue. I've just copied the exact
same implementation onto the QJsonValue functions.
Pick-to: 6.2 6.3 6.4 5.15
Fixes: QTBUG-104085
Change-Id: I175efddd75f24ae59057fffd16f6b257bf7ed36d
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
There's currently no statistically-significant difference between the
two, due to a huge pessimistion in QTestLib where every QCOMPARE* and
QVERIFY writes 1KiB of data onto the stack before doing anything else,
so I'm not reporting numbers in this commit message.
Pick-to: 6.4
Task-number: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: I233878596f0a8fe6b96360adb839fecd72c398a2
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If, for whatever reason, BOOST_NO_EXCEPTIONS is defined, the user of
the Boost libraries is supposed to provide a definition of
boost::throw_exception, which we didn't.
We used to run into this only on ubsan builds, but it seems we now
have the problem on a regular Ubuntu 22.04 build, too (cf. bugreport).
Fix by adding the necessary definitions.
Fixes: QTBUG-104083
Pick-to: 6.4 6.3
Change-Id: I9b061a158a5b77e8d286bd7b40312e5bc63ee8de
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
If the QFuture is canceled because the associated QPromise has been
destroyed, we still need to run its continuations (i.e. onCanceled
handler, if it's attached), so replaced the cleanContinuation() call
inside ~QPromise() with runContinuation(), which will also take care of
cleaning the continuation.
[ChangeLog][QtCore][Important Behavior Changes] QFuture now runs its
continuations when its associated QPromise has been destroyed.
Previously, if a QFuture was canceled because the associated QPromise
has been destroyed, its continuations were skipped.
Fixes: QTBUG-103992
Pick-to: 6.4 6.3 6.2
Change-Id: Ie05bc760c96c349aade8adb8d2fe5263aff8efac
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Now that QStringConverter can handle non UTF encodings through ICU,
add a way to get a decoder for arbitrary HTML code.
Opposed to QStringConverter::encodingForHtml(), this method will
try to create a valid string decoder also for non unicode codecs.
Pick-to: 6.4
Change-Id: I343584da1b114396c744f482d9b433c9cedcc511
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to https://www.w3.org/TR/REC-xml/#NT-Char unicode characters
within the range of [#x10000-#x10FFFF] are considered to be valid, so
fix the check for valid characters accordingly. This requires changing
the loop over the input QString to iterate over code points (instead of
code units).
Fixes: QTBUG-104362
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I7dcf5cad05265a54882807a50522d28b647e06ee
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When assigning the lambdas directly to a function_ref their lifetime is
limited to that of the expression. Store them on the stack first to
avoid the UB.
Fixes: QTBUG-104419
Pick-to: 6.4
Change-Id: I3c85ac683b0bd7768b646dc9d0a1ed4dd173e6f3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QGraphicsItems may override itemChange to prevent certain attribute
changes. Overriding ItemSelectedChange this way is explicitly documented
to be allowed.
However QGraphicsScene::clearSelection did not test whether items were
in fact deselected after the call to setSelection, and always cleared
the stored set of selected items.
Fix this by checking the actual selected state of the item as we iterate
over them, and store those items that are still selected in a set that
becomes the new selectedItems set (which will be empty if no item
overrides, which is the default).
Add a test that also checks that clearing the selection emits the
selectionChanged signal correctly (and does not if all selected items
block being deselected).
Fixes: QTBUG-85474
Pick-to: 6.4 6.3 6.2
Change-Id: I665afc132876e02e6e1061b7be37f4f6e4be418f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Set it to nullptr on clear, and deal with possibly null bindingStatus.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4
Change-Id: I66cb4d505a4f7b377dc90b45ac13834fca19d399
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We missed the terminating ";" in the QSKIP lines.
Amends ea4d6b987a
Pick-to: 6.3 6.4
Change-Id: Ibda43b8a84230c243dbcc74e157f4c3f8ef3891d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Thread termination might prevent stack unwinding, which then
generates ASAN errors such as
ERROR: AddressSanitizer: stack-buffer-underflow on address
0x7f3c1d7858b0 at pc 0x7f3c243d8918 bp 0x7f3c1d7857f0 sp 0x7f3c1d7857e8
Skip such tests so that we can enable blocking CI runs under ASAN.
Fixes: QTBUG-104421
Pick-to: 6.4 6.3
Change-Id: I169235a12190e3f72525cddfe1a44a4bee19eca1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This adds support for additional codecs to QStringConverter when ICU is
available.
We store the converter in the state (d[0]), and its canonical name in
d[1]. We need the name there, as in the clear function we close the
UConverter, and set the pointer to null. Consequently, the actual
conversion functions might need to re-open the converter again. The
advantage of this approach is that clear is used in the destructor of
State, and with this approach we properly clean up the state.
There is however a disadvantage: The clear function was so far also used
for resetting the state when QStringConverter::resetState . Discarding
the whole Uconverter for that is however rather costly. For that reason
we modify resetState to call a new function, State::reset. For existing
converters, it behaves the same as clear; for the ICU based converter,
we call the more efficient ucnv_reset. Code compiled against Qt 6.4 can
benefit from this more efficient version; code compiled against older Qt
versions will continue to work, as the conversion functions can just
recretate the converter from the name.
We can distinguish between ICU and non-ICU converters by checking if the
UsesIcu flag is set.
QStringConverter::name is changed to return the name stored in d[1]. The
interface of the ICU converter has a dummy name, so code using the old
name function from QT < 6.4 still returns something, namely a message
asking the user to recompile.
The function is moved out of line, as we need to check for the private
ICU feature, and want to avoid having that check in the public header.
As the QStringConverter ctor taking a name now can allocate memory, it
can no longer be noexcept. Removing the noexceptness is safe, as it was
only added after Qt 6.3.
Note that we cannot extend the API consuming or returning Encoding, as
we use Encoding values to index into an array of converter interfaces in
inline API.
Further API to support getting an ICU converter for HTML will be added
in a future commit.
Currently, the code depending on ICU is enabled at compile time if ICU
is found. However, in the future it could be moved into a plugin to
avoid a hard dependency on ICU in Core.
[ChangeLog][Corelib][Text] QStringConverter and API using it now
supports more text codecs if Qt is compiled with ICU support.
Fixes: QTBUG-103375
Change-Id: I7afb92fc68ef994179ebc7a3aa73beebb1386204
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QWidget::resize() is called on a maximized or minimized QWidget,
the window state of the widget and the corresponding QWindow is not
updated (i.e. remains maximized or minimized).
This patch updates the window state to Qt:WindowNoState when
setGeometry() is called in QWindowsWindow or QXcbWindow.
A test is added in tst_QWidget.
Fixes: QTBUG-104201
Pick-to: 6.4
Change-Id: I07491fb9293d13509573fc403750da0a50f6a785
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Restoring the toolbar state of a QMainWindow could not update
QWidgetPrivate::widgetItem for the QToolBar, because at that point it
was still holding the pointer to the widgetItem of the previous state.
Later on, when the new state was successfully applied, the previous
state was deleted, and the corresponding widgetItem was reset to
nullptr.
This patch explicitly resets the QToolBar's widgetItem while updating
the state, so that it is later correctly updated while creating a
new QWidgetItemV2.
Fixes: QTBUG-102395
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: I17613d62423edcc0faf85ecb0a714865a50d87e8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It was previously understanding them as character literal delimiters,
with unfortunate consequences if a numeric literal contained an odd
number of them. Recognize that an apostrophe with a digit on each side
of it isn't the opening quote of a character literal (unless the digit
before it is preceded by a u). Extend the findMocs test to trigger the
bug, prior to the fix; verified it passes with the fix.
Fixes: QTBUG-98845
Change-Id: I5db3ac59aaeade7c2d6c1fb680ba97261ec0e8a9
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
QComboBox uses QPersistentModelIndex to store the current index of the
underlying model. When the model is cleared, that index is automatically
invalidated, so calling QComboBoxPrivate::setCurrentIndex(QModelIndex())
does not result in signals being emitted, because we do not detect the
index change.
This patch uses indexBeforeChange to detect such situation and emit all
necessary signals.
Fixes: QTBUG-103007
Pick-to: 6.4 6.3 6.2
Change-Id: I29326830a30a17900839e8d1737a08bd940081ea
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Work around https://gitlab.freedesktop.org/mesa/mesa/-/issues/5875 by
treating the driver as broken when both the driver and device UUIDs
are all zeroes.
Fixes: QTBUG-104231
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf7973361d472ebb1cb433bc61b50b2828f75c6b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
If a window becomes active, then the accessibility system gets informed
about that already. Qt puts focus on the focus child of the activated
window afterwards, and if this emits another accessibility event, then
accessibility clients like Windows Narrator will stop reading the
activated window, and instead read about the focused widget.
This makes dialogs like message boxes poorly accessible.
Accessibility clients already know that a window became active, and can
query Qt about the focused child within that window.
Amend test case.
Fixes: QTBUG-101585
Pick-to: 6.4 6.3 6.2
Change-Id: I2d6bff7c415a6f29c4a4f7f4e4be38079fb976ca
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QMessageBox has text values that an accessible client should be able to
read directly without having to navigate through the text labels.
Add test coverage.
Windows Narrator is inconsistent in reading the contents of a message
box. It might skip them completely, even though the text property is
read through the interface.
Task-number: QTBUG-101585
Change-Id: I639c2210a627733c093743790c6a6b83f4bb80d0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
