Input value which is over the highest acceptable value, but consisting
of a number of digits equal to or less than the max value should be
considered intermediate.
[ChangeLog][QtGui][QIntValidator] Input value with over the highest
acceptable value, but with equal or less amount of digits than the maximum
value is now considered intermediate.
Task-number: QTBUG-59650
Change-Id: I71a77c9c266f0f3b62c71ac6cb995019385c1cf5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The existence of the helper application confuses Coin which will
result in an error.
Change-Id: I3edf3f27acbe133b180d41a8ae950991e9a5b5da
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The test and its helper were removed some time ago.
Change-Id: Id82a2a1bf829f272e9c1447e697935934c923092
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I017b501506c54c4b89773d2b949c097598bc7049
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I53d5238ff36706eb9c6f8eb04b954ec595ca30de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I55078563304959c41e0dd9bb7bb91a6fc51e005a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
By disabling the "stdinprocess"-related tests/code...
... but differently. After fixing my earlier mistakes I'm getting
segmentation faults when it executes a couple different library calls
after the QProcess object has started.
Task-number: QTBUG-68596
Change-Id: Id42a1f939c000754a187dee90c4a4cdfec816232
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The "app" subfolder was already excluded in the .pro-file but Android
supports QProcess, so lets include it in the build. Unfortunately it
currently has trouble and crashes (the child process or both processes).
So we skip those tests.
Task-number: QTBUG-68596
Change-Id: I2e6d0869c408bf08b22c02145db8ce522c64c617
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
To make it run we make sure it finds the syslocaleapp, however since it
causes a crash we skip the test that uses it...
"formatTimeZone" was failing, but it is the exact same issue as in
e08ba34f26, so we solve it the exact same
way.
Change-Id: Ifd5c796735775dad94acf55210cf18c0f4d375ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Same issue as has been seen a few other places: path to executable being
wrong, and then a crash when the paths are fixed.
Change-Id: I77a596c6e52d2a02a69a6b9dfe91f878b3ffe07c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The row names for this test were very unspecific.
After reverse-engineering what they are testing, I gave them proper
descriptive names, which allowed me to notice that there were tests
for "filtered in after sourceModel->setData" but not for
"filtered out after sourceModel->setData".
Change-Id: Ib79108db803ae77fb65d29cf0c0ef96c26655980
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTableView::doItemsLayout() updated the scroll offset for the vertical
header after layouting was done. Since the scroll offset affects the
viewport of the editors, the adjustment was done too late.
Therefore we update the scroll offset right after the scrollbars are
set inside QTableView::updateGeometries()
[ChangeLog][QtWidgets][QTableView] Fixed calculating geometries
for editors
Task-number: QTBUG-48244
Task-number: QTBUG-49548
Change-Id: I3b057764cf99d42d861928a1c73277d34b440f9a
Reviewed-by: David Faure <david.faure@kdab.com>
It was observed on OpenSUSE VM in CI - apparently, even after succesfull
read from UDP socket error was not UnknownSocketError. While it's under
investigation, the DTLS auto-test should limit itself by DTLS things and
barely test IO success (socket-wise) when needed.
Change-Id: I0773a02c591432b0d6c894f4131f70e41dc7ed72
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It all started from the compiler's warnings about 'this' captured but
not used in lambdas. While fixing this it was noticed that 'client' socket
has a lifetime longer than the test case itself (the socket has a parent,
which is tst_QSslSocket object). The 'server' socket was simply leaked.
So there is no guarantee that some of them (or both) later, after the
test failed in one of QVERIFY, for example, does not emit 'encrypted'
upon receiving more data; this will result: in reading/writing from/to
invalid memory location (captured local 'encryptedCount') and/or probably
exiting event loop when it's not expected to do so.
Change-Id: I51de0493d989a5ba36de2cef58d35526c0e26cda
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QTest::addRow expects a format specifier; this usage makes GCC complain
with -Wformat-security. Use the "old" newRow call instead.
Change-Id: Ieed8e4f64ff5e3d0d4e87325629d20ed6839ff9d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you're on a Unix platform which don't have the necessary defines then
the thread will never be launched due to an error. Skip the test
instead.
Change-Id: I83159988b8f330a750c7aa328a8805e4fa478070
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
at the time this patch was conceived, it was meant as an exercise in
getting rid of usages of ProString::toQString(m_tmp). however, this was
meanwhile superseded by use of toQStringView().
but the change itself should have been done a long time ago already, and
there is no harm in going through with it.
on the way, this also unifies and fixes some of the error messages.
Change-Id: I337aff994c508df783df4794c3fa0762d83a691b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Using SSE 4.1 because of the need for PMINUB.
Change-Id: Ib48364abee9f464c96c6fffd152ebd3f8ea7fe94
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
With ICU and on macOS it appears that the comparison is done on a
canonical form, while CompareString(Ex) does not do that, as the added
test verifies. Explicit normalization fixes that.
As a bonus, this also unifies the code path between regular Windows
and UWP by unconditionally using CompareStringEx (which requires
Vista or later).
This issue surfaced while running the ECMASCript 6 Conformance Test
Suite in QtQml.
This re-uses the existing test for localeAwareCompare, which was
disabled on Windows, macOS and Linux with ICU (the common case).
Change-Id: I52440fce60b54745ead1eff005ec51e98e2a79ec
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I034752b4e5d22b98f6def95fb53c2b1947dded03
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QFileDialog::selectedMimeTypeFilter() returns either an empty
filter in the case when a platform file dialog doesn't implement
mime type filters, or initiallySelectedMimeTypeFilter() in the
case of Qt's file dialog. In both cases the result is incorrect.
Make it return a mime type filter corresponding to a selected
name filter. As a result, tst_QFiledialog::setMimeTypeFilters()
has to be fixed: QFileDialog::selectMimeTypeFilter() can't select
a name filter for an invalid mime type, and "application/json"
is not supported by RHEL 6.6, so replace it by "application/pdf".
Change-Id: I58d3be860a9b5e8a72cba86d74b520178115a812
Reviewed-by: David Faure <david.faure@kdab.com>
When removing rows, the tester is looking at the data of the row
"just before" and the row "just after" the removed rows, to see if
they are still the same at the end of the removal operation.
Guard this with bounds check, in case there is no row just before
or just after.
This is the opportunity to use modeltester in tst_qidentityproxymodel,
which was already a testcase for removing the only row in a given parent.
Change-Id: Iec8228c16b9c670b794e2665356d153679178494
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When testing zones "America/Mazatlan" and "Mexico/BajaSur" the test
crashes from an assert. Skip testing the zones for now.
Task-number: QTBUG-69132
Change-Id: I595089647792e9a2c094d63cb837584b8cdc9cb9
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The previous approach of having the signalbug helper in a subdirectory did
not work for shadow builds, as QFINDTESTDATA would not find that dir. By
putting both test and helper into the same directory, the helper will be
found in the test's current working directory.
The second problem was that not putting executables into debug/release
subdirectories might have lead to the WinRT AppxManifest being overwritten
by the wrong configuration. When Qt is configured with -release for
example, it was possible that the debug manifest (Manifest files are
always created next to the target) is written last and thus contains
debug VCLibs as a dependency.
Change-Id: Ia39315432860405642542449296c16dd2ae9fa9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It causes most of the fails seen on Android.
Task-number: QTBUG-69064
Change-Id: I2f97fea41ee78e7962b8c34ed996bbe4bcb88732
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Skip a few tests that Android's time-zone information doesn't suffice
to get right.
Task-number: QTBUG-68835
Change-Id: Ibf8d213c96b29d74fc478a0ede686ae52b5200fb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The original code was added by b316c3ac5e
(in 2012). This patch changes two things:
1) We now rely on WM to position a window based on the set gravity. It
should not be necessary to calculate coordinates manually as was done
in windowToWmGeometry(). We don't even know the decoration size before
the window is mapped.
2) We now update gravity whenever needed instead of hardcoding based
on what Qt APIs (setGeometry vs setFramePosition) where used to set
the initial window position.
The patch from b316c3a says:
"Determine gravity from initial position. Do not change later as
it will cause the window to move uncontrollably"
Since it did not elaborate on the situation, we can only assume
that it was caused by another bug in Qt at the time or perhaps
a broken WM. From [1]:
"Applications are free to change their win_gravity setting at any
time. If an Application changes its win_gravity then the Window Manager
should adjust the reference point, so that the client window will
not move as the result."
Tested on Ubuntu/Unity, KDE/KWin, Gnome-shell/Mutter, Lubuntu/OpenBox.
Works as expected everywhere expect Unity. Unity seems to ignore
XCB_GRAVITY_STATIC and treats it as XCB_GRAVITY_NORTH_WEST, which means
that setGeometry/setFramePosition produce the same placement on this WM
(the behavior was the same also before this patch).
P.S. Also renamed xRect -> rect, which was a leftover from
ae5f2a6672
With this change we can un-blacklist QWidget save/restore geometry
auto tests.
[1] https://specifications.freedesktop.org/wm-spec/latest/ar01s09.html
Task-number: QTBUG-66708
Change-Id: I381eef5d34dddb04de16a897ce5540b9c430b216
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Where possible. Sometimes the replacement is QTRY_COMPARE instead.
Also don't use QTestEventLoop directly when it can also be replaced with
QSignalSpy use.
Remove the TimerHelper class, since its uses can be done with QSignalSpy (and a
lambda when remainingTime is checked). Although checking static single-shot
timers still needs a target object, so use a stripped down version in those
tests.
remainingTimeDuringActivation() was not actually testing the repeating case, but
single-shot case twice, so fix that. In the repeating case the remaining time is
exactly 20 ms on my machine, but QEMU emulation seems to be slow enough for time
to advance before the lambda is executed, so relax the conditions.
Task-number: QTBUG-63992
Change-Id: Iae92ff7862a13d36e695eec63b54403ec872f2b4
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: I86640b22c9e7a258965805a661e1e8c3ead8d012
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: Ia7fda4c42d4aeaecd4485d18383cf46bf6af63d1
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
QWidget::restoreGeometry() is calling QWidget::move() with restoredFrameGeometry,
which internally calls setGeometry() and sets positionPolicy = QWindowPrivate::WindowFrameExclusive,
which is invalid: restoredFrameGeometry is WindowFrameInclusive geometry.
QPA plugins rely on correctly set policies when interpreting x,y. QWidget::move()
was not designed for this AFAICT, so making it to accept frame geometry is
no-op. It is widely used legacy code, changing it could cause regressions.
Save/restore API was introduced in Qt 4.2, at that time we did not have APIs
like QWindow::setFramePosition(), so its unclear why geometry() was not stored
instead. The documentation also is somewhat unclear:
"[..] save the geometry when the window closes [..]"
Frame or client geometry? It does not specify. And from the code we see
that frame geometry was passed as client geometry, not making the original
intention clearer. Besides that, restoreGeometry() is full of other undocumented
assumptions where to place windows and when to fail (fortunately its easy
to write your own save/restore logic). Added a Qt 6 note in the source code.
What this patch changes:
Now we store geometry() in saveGeometry() and use that value in restoreGeometry()
by setGeometry(). This does not cause any behavior difference in window
positioning (tst_QWidget::saveRestoreGeometry still works). Geometry restored
from data saved with earlier versions of saveGeometry() might be positioned at:
x + leftMargin, y + topMargin.
This patch makes tst_QWidget::saveRestoreGeometry to always fail instead
of being flaky. Blacklisting for XCB instead of selected distros.
Also enabled excluded code paths for XCB on tst_QDockWidget::restoreDockWidget().
It does not seem to be flaky, maybe it was in 2015, but lot of things have changed
since then.
Task-number: QTBUG-66708
Change-Id: Ic86a6fd091e2c71b7550b2f476386da704253cd4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as specified in the documentation. This was a regression from Qt4
and can cause mouse cursor flickering durig dragging on e.g. custom
widget where some areas of the widget do not accept drag-and-drop.
Task-number: QTBUG-67155
Change-Id: Iaa6f9407181931ed8e3d6a8fec13fd59d3c8625d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This was a regression from Qt4 and also is the documented behavior.
In addition this patch fixes various issues with cursor shape updating
that were discovered along the way and that are necessary for testing
the new changes.
The code in QGuiApplicationPrivate::processDrag() also needed a fixup,
particularly the resetting of QGuiApplicationPrivate::currentDragWindow.
Without this fix we would get DragMove (the one that immediately follows
the DragEnter) only for the first DragEnter event. For example when dnd
starts on mouse press then for mouse click we would get:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragLeave
but the expected is:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragMove->DragLeave
Task-number: QTBUG-34331
Change-Id: I3cc96c87d1fd5d1342c7f6c9438802ab30076e9e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
A follow-up of 9d078c8f147ea875e862360b0d7480201fbbcff7 in qtqa repo.
Change-Id: Ib7c1f5cf325e9ad0066aae139b0dc72bc0184b32
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Need to do the same for startsWith() and endsWith(). indexOf() is a lot
harder.
[ChangeLog][QtCore][QByteArray] Added compare(), which takes
Qt::CaseSensitivity as one of the parameters. This function is more
efficient than using toLower() or toUpper() and then comparing.
Change-Id: Ib48364abee9f464c96c6fffd152e69bde4194df7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When an internal DnD occoures in IconMode, the item is moved to it's new
place but the logic in filterStartDrag() has no clue about the fact that
an internal move happend. Therefore the item gets deleted. Fix it by
changing the event's drop action to Qt::CopyAction to avoid the deletion
as it is done within QListWidget DnD code.
[ChangeLog][QtWidgets][QListView] Do not delete item on internal move.
Task-number: QTBUG-67440
Change-Id: I873d3c9fa76e107e108d9af0dcf8cecd1e18a18f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
After the move to PCRE2, optimizing patterns has been a thorn in the
side due to the fact that PCRE2's JIT compiler modifies the pattern
object itself (instead of returning a new set of data, like PCRE1
did). To make this fit with the existing behavior, a read/write
lock was introduced, with the read part locking when matching and
the write when compiling (or JIT-compiling) the pattern.
This locking strategy however introduced a performance issue,
as we needed:
* to acquire a write lock to compile/optimize the pattern (incl. the
common case where the pattern was already compiled, so bailing out
immediately);
* to acquire a read lock during the actual match, to prevent
some other thread from optimizing the pattern under our nose.
This was due to the "lazy" optimization policy of QRegularExpression
-- optimize a pattern after a certain number of usages. The
excessive amount of locking effectively limited scalability.
Simplify the code, and drop that policy altogether: since JIT
compiling in PCRE2 is faster and pretty much "always recommended",
just always do it for any pattern (unless it gets disabled via
env variables) when compiling it.
This allows to go back to a plain QMutex, and now the actual
matching doesn't require acquiring any locks any longer. Of course,
there is still a mutex acquired just before matching for checking
whether the pattern needs recompiling in the first place; this can
probably be further optimized via double-checked locking (using
atomics), but not doing it right now.
This shift makes a couple of pattern options controlling
optimization useless, and allows to centralize the 3
QRegularExpression tests (which were actually the very same test,
just setting slightly different optimizations strategies).
While at it, install a stress-test for threading, with the idea
of running it under TSAN or helgrind to catch bugs in
QRegularExpression's locking.
[ChangeLog][Important Behavior Changes][QRegularExpression] Regular
expressions are now automatically optimized (including JIT
compiling) on their first usage. The pattern options
OptimizeOnFirstUsageOption and DontAutomaticallyOptimizeOption no
longer have any effect, and will get removed in a future version of
Qt. QRegularExpression::optimize() can be still used to compile and
optimize the regular expression in advance (before any match), if
needed.
Task-number: QTBUG-66781
Change-Id: Ia0e97208ae78255fe811b78029ed01c204e47bd2
Reviewed-by: David Faure <david.faure@kdab.com>
Before the fix is applied this test fails because QFINDTESTDATA will
return "/usr/" instead of the folder with the same name in the current
directory.
The 'usr' folder can't be located 'next to' the application since this
does not trigger the issue (QFINDTESTDATA looks for the folder next
to the executable early on). So we put it in a subdirectory and change
the current working directory to its parent directory.
Change-Id: I627679dcb6f2f6954264e23bfc1a71de3bff7203
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The ObjectBoundingMode coordinate mode of QGradient allows specifying
the gradient coordinates relative to the object being painted. But if
the gradient brush also has a transformation, that transformation is
applied in the logical, not object, coordinate space. That behavior is
counterintuitive. However, changing it now would break existing
code. Instead, we introduce a new coordinate mode enum with the
expected behavior, and document the old one as deprecated.
This prepares to fix the bugs below in qtsvg, by making
it possible to specify the same behavior in Qt as SVG has.
[ChangeLog][QtGui][QGradient] Add ObjectMode coordinate mode
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to 18 to account for changes in the serialization of QGradient.
Task-number: QTBUG-59978
Task-number: QTBUG-67995
Change-Id: I8820a2555359812f3e1a46e37d6ac2cc29a2091d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
winrt still has some issues with some character sets. These
tests are skipped/blacklisted for now and will be investigated.
Task-number: QTBUG-68297
Change-Id: I898e3383a4673b6dc87815a75e705f3302a4cbba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A change between 5.11 and dev has modified the position of testqrc
inside the resource list. Adapt accordingly.
Change-Id: I697103f4b8c9e93bb613e814c47a4e68e9a997ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In order to get winrt CI checked, the network tests are being skipped
for now. As soon as winrt has landed in CI, these will be fixed and
re-enabled.
Task-number: QTBUG-68297
Change-Id: I692d72f9e0c97840bd7396551b4e707eec845ebb
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The test is somewhat similar to tst_QSslSocket but is smaller (in scope, will
grow in future), it has no QTcpSocket/QAbstractSocket-specific things and
has more DTLS-specific code. At the moment it does not use our network
test server, all work is done in the same process with two QUdpSockets
and two QDtls objects. We test (both on client/server ends):
- parameters validation (for all functions that do this) and
the correctness of error codes/handshake states
- handshake procedure (with/out certificates and with pre-shared keys)
- timeouts and re-transmissions during (D)TLS handshake
- peer verification (and related verification errors)
- aborted/resumed handshake
- encrypted I/O
- DTLS shutdown
For now, this test is OpenSSL-only.
Task-number: QTBUG-67597
Change-Id: I27006bfe3d6c02b89596889e8482a782c630402a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... by adding a prefix to the resource.
On android there is a resource ("qpdf") which gets included in the root
in all applications, included from "src/gui/painting/painting.pri".
So we move the test data to a sub-folder.
Task-number: QTBUG-68596
Change-Id: I67f2ed79a32c68d9a76cafba8ef23fe0da7c0fe8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"terminate" and "terminated" both fail on Android since
QThread::terminate not supported on Android. So we should skip them.
Task-number: QTBUG-68596
Change-Id: Id0d1dde2cfa02bb2978e5dd16087bf8f3bf112b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In tst_QDateTime::springForward(), we test correct handling of times
in the gap; these are formally invalid and a mktime() implementation
may reasonably reject them causing our date-time code to produce an
invalid result. So handle that case gracefully in the tests, only
insisting on consistency between the two ways of preparing the date.
In one test, package the repeated code I was going to adapt into a
macro to save repeitition.
Task-number: QTBUG-68832
Task-number: QTBUG-68839
Change-Id: Ib8a16ff007f4e75ab2ccff05b1ccf00a45e50dc8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Android doesn't use the proper zone-abbreviation, so just check it
starts with the right date-time. Revised the way the #if-ery for that
is handled, to avoid repetition of the (now more complex) condition in
the two tests affected.
Task-number: QTBUG-68833
Change-Id: Iceb5469f46c69ba5cdbaf7ca050ad70f2bb74f44
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Have a test expect what it does produce rather than fail what we can't
fix.
Task-number: QTBUG-68837
Change-Id: Icda7bd9968682daf97d46d597f8bb0433560cde2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They used different messages for the same excuse, which weren't well
worded in any case; and their #if-ery was differently decorated.
Change-Id: I28f5032693aff1036cb086ac4032c669110a5cb5
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This part of DTLS is relatively easy to test: we never do a complete
handshake. Certificates, verification, ciphers, etc. - do not matter
at this stage (to be tested in tst_QDtls). Errors are mostly insignificant
and can be ignored or handled trivially.
The test is OpenSSL-only: SecureTransport failed to correctly implement/
support server-side DTLS, the problem reported quite some time ago and
no fixes from Apple so far.
Task-number: QTBUG-67597
Change-Id: I21ad4907de444ef95d5d83b50083ffe211a184f8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When an item is explicitly hidden, then it should stay that way even if
its parent is reparented. The item itself needs to be explicitly shown
for it to be made visible.
Task-number: QTBUG-54843
Change-Id: I0c6eea9a936f82d5874e3246292bd16365440411
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68865
Change-Id: Ia245f72826be071e5617c417e3d9f50bdcc689a9
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68864
Change-Id: Ib4baa458b80eea5861e89145b85d865e9a78989c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68862
Change-Id: Ib02c28ede135c9ba4303dbf0224b32b080762a31
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68861
Change-Id: I343d8b583d105a7e1cc336e94399cde9eb261e9c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on QEMU armv7 builds.
Task-number: QTBUG-68866
Change-Id: Idb4bf39712a22c40f6d779a46ad2dd1f456ef48b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 and QEMU builds.
Task-number: QTBUG-68860
Change-Id: I1907e713e8c743cf5cf8e284df516600a0c03dba
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
It appears that in the 5 years since we deprecated this function, people
have not stopped using it. The removal of qt5_use_modules() caused lots of
troubles in packages still using it when they were compiled against Qt 5.11.0.
Instead, let's revive this function and keep it for the Qt5 life time.
See discussion on qt-development mailing list:
http://lists.qt-project.org/pipermail/development/2018-June/032837.html
Change-Id: Ic263e3bb6706268cb9ea38a0711665f166a3aa9e
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not possible to ask for window activation on Wayland, and some Wayland
compositors—such as Weston—don't give window focus to newly created window
either.
Task-number: QTBUG-62188
Change-Id: Ibebb2a14e03127fec703d79498627fccf65b2f88
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QString::sprintf(), like the C printf-family, always includes two
digits in any exponent it outputs. Up to 5.6, number() and arg()
taking a double did the same; but changes at 5.7 to enable opting out
of the leading zero this implies for a single-digit exponent
accidentally opted out of it in args() and number(). This commit
fixes number() and arg() to include QLocaleData::ZeroPadExponent in
the flags they pass down to the C locale's doubleToString(), restoring
the prior behavior, including consistency with sprintf().
[ChangeLog][QtCore][QString] Formatting of doubles with single-digit
exponent, by number() or args(), now includes a leading zero in that
exponent, consistently with sprintf(), as it did up to 5.6.
Task-number: QTBUG-63620
Change-Id: I10c491902b8556e9f19e605177ead8d9fd32abd9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If there is a parent (typically an itemview) then StatusTip events
should be sent to that. However in the case of there not being a parent
then the event should be sent to the QHeaderView itself.
Task-number: QTBUG-68458
Change-Id: I2a8c11c973210c7adf1bf29443f224f968a357a9
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It was the same in all test rows, so move it from the _data() to a
fixed value in the test. Also, don't implicitly coerce C-string
literals to QString.
Change-Id: Ieee4c7ffbf251c4b69b5acd79125dfa93eb51d6e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This property allows to change the default behavior in
which list items occupy the entire width of their column.
Setting it to Qt::{AlignLeft,AlignRight,AlignHCenter} will
reduce their widths to the minimum values, thus allowing to
have intermediate free space. Then the user will be able to
begin selections by mouse from this space.
[ChangeLog][QtWidgets][QListView] Added itemAlignment property.
Task-number: QTBUG-56606
Change-Id: Iae55c251379be4e45d0c0d69175ff4388b5785b4
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is very similar to QJsonDocument, but there's no QCborDocument.
QCborValue is that.
[ChangeLog][QtCore] Added QCborValue, QCborArray and QCborMap, classes
that permit DOM-like access to CBOR data. The API is similar to
QJsonValue, QJsonArray and QJsonObject, respectively.
Change-Id: I9741f017961b410c910dfffd14ffca50dd8ef3ba
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When pasting text, it is possible that part of the text is still pasted
but part of it is not. For example, if there is a maximum length set then
only the first part of the text is pasted and the rest is dropped. In
this case it should still emit inputRejected() as not all of the input
was accepted. This amends c901cdadc0.
Change-Id: If7906767be27e88ed9914c50bf0427833de5b8fa
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QIODevice represents considreable overhead, even with just QBuffer, for
parsing simple things. Benchmarking showed it was spending 25% of the
parsing time inside one QIODevice function or another. So this commit
accomplishes two things:
1) it increases the buffer size from 9 bytes to up to 256, which should
reduce the number of calls into the QIODevice
2) if the source data is a QByteArray, then use it directly and bypass
the QIODevice, thus increasing performance considerably
Change-Id: I56b444f9d6274221a3b7fffd150c531c9d28e54b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Adjust line positions to deal with negative leading which isn't included
in height of QTextLine.
Change-Id: Id7918968c0f9d7e65700b9e7a08fc5d761883f22
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
As the full range of TIME is '-838:59:59' to '838:59:59' then we cannot
use QTime as the object to store this data in. Therefore a QString is
used instead for passing the data to and from. This does not impact
existing code using QTime already as it will still convert it from
the QString to a QTime to give the same result as before.
[ChangeLog][QtSql][MySQL] The TIME data type is now treated like a
string-based type in order to respect the full range of the TIME data
type.
Task-number: QTBUG-57028
Change-Id: Ieb7105bff3043b845f76bc873d088e6bac1e4f10
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the fbo had samples > 0 set, it would use a temporary fbo with
a default configuration losing the HDR precision.
Change-Id: I7e9966165b3100f148c4ad24738f3ee71273f29a
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The implementation of QTransform::transposed() had a wrong assumption
about the type of the result.
Task-number: QTBUG-68630
Change-Id: Ia5ce794efe773d74fb5fdaff3da8cae2b452e7e5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The test doesn't make much sense on platforms that don't support window
activation.
Task-number: QTBUG-66849
Change-Id: I875314d026d666173ec345d0864ad41d66179783
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test is actually passing, so just enable it.
Task-number: QTBUG-66849
Change-Id: Ie1566b9e5e19f5ab6d919624aa14662a1d4483ec
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Link to a bug report so we can track the failures and figure out how to fix
it in Qt Wayland or if we should skip the tests in a proper way. I.e. with
platform capabilities or similar.
Task-number: QTBUG-66849
Change-Id: I7a16333c7d2284eb9da6efd4515891438e9976b3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Unlike QNAM, our toy http2 server sends payload as one big chunk as soon as
it fits in the receive window's size. Internally, 'frame writer' splits this
payload into many DATA frames of the appropriate size (imposed either by the
default value or the one from the client's SETTINGS frame). If some test fails,
we can end up with a server waiting for the writer to send all the DATA frames
though it is not needed anymore - there is nobody to receive them after a failure.
This patch moves such a loop into the test server instead and stops the loop early
if needed.
Change-Id: Iea2dcd718d8f83386fd16004807f6447bf999435
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Currently when doing comparison with std::tuple the fallback toString
method is called which returns a Q_NULLPTR thus not allowing proper
diagnostic of the values that triggered an error. This patch
adds support for std::tuple to improve the tests output readability.
[ChangeLog][QtTest][QCOMPARE] Now outputs contents of std::tuple on
failure.
Change-Id: I046a55e2ce44c3f7728d51e4745120d38aa5e007
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtWidgets][QLineEdit] Added inputRejected() signal for when
a key press is not accepted by the QLineEdit. For instance, when an
invalid key is pressed for a validator set.
Task-number: QTBUG-57448
Change-Id: I39182a78b07b37c6da01905b8da4c57930e3454b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Nothing in this test references date-times.
Change-Id: I4005cda550d54abe46370963b1e91fab9829298d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Similar to Qt::GlobalColor, the presets allow the user to create
brushes based on predefined gradients, quickly getting pretty pixels
on screen.
The presets are based on the linear gradients from WebGradients, a
free collection of gradients, hosted at https://webgradients.com/.
The few radial and blended gradient presets have been excluded.
Change-Id: I1ce8f2210a6045c9edb8829ab3eddcc313549127
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Avoids an unused function warning.
Change-Id: Id221595920e9a34eb83b66fe123d664f60fcae05
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
qFuzzyIsNull has a fixed range, where qFuzzyCompare can tell if numbers
are different in a more relative range. Without it QPointFs that are
heavily scaled will be interpreted as identical, when they are quite
different at their own scale.
Task-number: QTBUG-60359
Task-number: QTBUG-62161
Change-Id: Ic4ba90e9e994aedff5548d690f053eb309b0a60b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a QComboBox is used as the editor for a relation inside a view then
it could end up showing the contents of the EditRole. This would be the
field which is used to represent the entry as opposed to the DisplayRole
which is what the user would expect to see is.
Therefore, setEditorData() is overridden to ensure that it is showing
the right data to the user. When the model gets updated, it will take the
corresponding EditRole value as before to ensure it is updated correctly.
Task-number: QTBUG-59632
Change-Id: Ibbccc3e9477de1cdefb654051b97dd111df36382
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
It happens because our filesystemwatcher thinks it is subdirectory and not
two different paths
Task-number: QTBUG-60676
Change-Id: Ic753e9481cb26303a030044e0a5ab4d703bc529f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
QDesktopWidget::screenGeometry() and similar was deprecated in 5.11
and replaced by QScreen::geometry()
Change-Id: Ic630d022bc6461af78f49684c8ac9d1836d738bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is the counterpart of the previous commit.
[ChangeLog][QtCore] Added QCborStreamReader and QCborStreamWriter,
classes for low-level reading and writing of CBOR streams.
Change-Id: Ia0aac2f09e9245339951ffff13c72e4bffdf4a56
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When a new model was set with setSourceModel() and the mapping was
built up, the destruction of the old model caused a reset in the
QSortFilterProxyModel which lead to an empty view or an assertion.
Now we properly disconnect the old model again and also clean up the old
mapping/persistent indexes when a new source model is set.
Task-number: QTBUG-44962
Task-number: QTBUG-67948
Task-number: QTBUG-68427
Change-Id: I2e0612899c210bde3ac0cfa59aefd78269deee5b
Reviewed-by: David Faure <david.faure@kdab.com>
Use the screen resolution obtained from QScreen instead
of QDesktopWidget.
Change-Id: If27bcf1c94a783c4c617d5364846b95a625bb93d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
A step modifier already existed when scrolling with the
Qt::ControlModifier held. This patch applies this functionality to
other methods of stepping a spin box.
Holding the modifier increases the step rate when:
- scrolling;
- pressing the up/down keys;
- pressing the spin box up/down buttons.
[ChangeLog][QtWidgets][QAbstractSpinBox] The Qt::ControlModifier
increases the number of steps a QAbstractSpinBox takes for the
following interactions: scrolling, up/down keyboard keys and the spin
box buttons. Previously, Qt::ControlModifier only affected scrolling.
Task-number: QTBUG-67380
Change-Id: Icc8754d5c007da0771bfaef113603a2f334dd494
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
tst_QListView::horizontalScrollingByVerticalWheelEvents failed to
compile with this qmake argument.
Change-Id: I35dd4ad4c9ee92c06c94b21dd7325aee00fc98d4
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The bounding rect was not including positive leading of the last line. This
patch solves it by changing using QTextLine's setLeadingIncluded, and adds
handling of negative leading to keep rendering unchanged in that case.
Change-Id: I4d18b81892184bb85cd7949a5dc3fb9cfa270a26
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Qt already has the widget attribute WA_StyleSheet to which indicates that
a widget was subject to a style sheet, but it doesn't indicate that the
widget was actually affected by the style sheet. For example, an application
style sheet will set the WA_StyleSheet attribute on all widgets, even if it
only targets QPushButtons. The WA_StyleSheetTarget new attribute pairs with
WA_StyleSheet to give this extra information.
[ChangeLog][QtWidgets] Added the Qt::WA_StyleSheetTarget attribute to
indicate that a widget was affected by a style sheet.
Change-Id: I7cca18ddec8fbb69f294ae2ef990672a5f4f1d83
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
On macOS the selected text was empty when run together with other tests. Change
QApplication::setActiveWindow() to QWidget::activateWindow() to get keyboard
focus as well. After that the expected temporary file name is selected.
Change-Id: I3b0c2bfca8008cb89b7e666a362beb15a851d8e0
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Right now itemHasNoContents() is flaky when run together with others on macOS.
The failing assertion seems to be just checking that an effect added to an item
with the QGraphicsEffect::ItemHasNoContents flag is painted, so relax it to
allow multiple repaints.
Change-Id: Iecf445ce1bce672e7cd180a148cd53f9c60e40fe
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Windows 10 windows contain an invisible area within the NC window frame
on which the mouse cursor is enabled to perform resizing. This change
captures the geometry of the invisible margins and considers it when
moving a window, so that, for instance, a move(0,0) does not generate
gap between the window and the beginning of screen.
[ChangeLog][Windows] The dimensions of invisible margins inside the
frames of Windows 10 windows will now be disregarded in the positioning
of Qt windows to avoid a misplaced look (offset by a few pixels from
the expected position).
Task-number: QTBUG-55762
Change-Id: I1f537756eb1a093f78b919de9d44992528199700
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Wait for the spinbox to show become active in the previous test. Also use
QWidget::activateWindow() instead of QApplication::setActiveWindow(). Use of the
latter seemed to result in some confusion where QWidget::isActiveWindow()
returned true but QWindow::isActive() on the underlying window returned false,
leading qWaitForWindowActive() to fail.
Also remove superfluous setting of focus. It was just set and verified.
Change-Id: I023cdc2d272e23b2537b32606b7a3bf35bf671ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that made create()
on a type with const qualification fail to compile.
Task-number: QTBUG-68300
Change-Id: I0825ff5b5f6f4c85939ffffd152f3e55e5b9caae
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This accounts for a case of a placeholder being duplicated in the
prepare query, but where only one placeholder was used. This amends
e4e87a2ece
Task-number: QTBUG-68299
Change-Id: Ia92ee912facd51a13e7222886debb219b24442b0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
setAutoRepeat() is failing on macOS and Windows when run together with
defaultAndAutoDefault(). It succeeds when run on its own. Adding the wait allows
it to succeed when run with the other tests as well.
Amends 0cb940b1d3, which removed the wait.
The comment is the same as before. I couldn't see a better way to replace the
wait (QApplication::topLevelWidgets() already returns only the testWidget and
testWidget->isActiveWindow() returns true).
Another theory I had was something waiting for the KeyRelease so I changed
QApplication::sendEvent() uses to QTest::keyClick(). It did not help but that
still seems preferable.
Change-Id: If87d1e6e018751f3068ea4c913ae6731aba41ff0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QTableModel::setItemData() did not treat Qt::EditRole and
Qt::DisplayRole as the same. This lead to inconsistencies between
setItemData() and QTableWidgetItem::setData()
[ChangeLog][QtWidgets][QTableWidget] Fix handling of Qt::EditRole and
Qt::DisplayRole in setItemData().
Change-Id: I456f4c8e654de701dcd579236162b8aaa8ba1e53
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
tst_QProcess hangs sometimes in QEMU. Based on my experiments in a debug VM the
offending test seems to be processesInMultipleThreads(), since that was were I
was able to reproduce the hanging in.
Since the whole test executable hangs, blacklisting is not enough, so skip the
test.
Task-number: QTBUG-67760
Change-Id: I34f8852be955a8612deac22b369f68d79a139d11
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The added test case contains the binary JSON equivalent of
["ž"]
with the modification that the string's length has been set to INT_MAX. In
Value::usedStorage this length is used through the pointer d like so
s = sizeof(int) + sizeof(ushort) * qFromLittleEndian(*(int *)d);
Because 2 * INT_MAX is UINT_MAX-1, the expression as a whole evaluates to 2,
which is considered a valid storage size. However, when converting this binary
JSON into ordinary JSON we will attempt to construct a QString of length
INT_MAX.
Fixed by using String::isValid instead of Value::usedStorage. This method
already takes care to avoid the overflow problem. Additionally, I've tried in
this patch to clarify the behavior of Value::isValid a bit by writing it in a
style that is hopefully more amenable to structural induction.
Finally, the test case added in my previous patch had the wrong file extension
and is renamed in this one.
Task-number: QTBUG-61969
Change-Id: I45d891f2467a71d8d105822ef7eb1a73c3efa67a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QTableWidgetItem setData() function
Task-number: QTBUG-48295
Change-Id: I82289b6db78eeef09d586da267046032984952da
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Previously the test worked because the client was the last party to know
when encryption was established. However, due to changes in the TLSv1.3
handshake the server is now the last one.
In either case, relying on both to be encrypted when one of them is
finished is not great, so now we only quit the event loop when both
client and server have emitted 'encrypted'.
Change-Id: Ic1fc75671206d866f7ea983805fd58a99657aac6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QHeaderView::reset() did not reset the cached size hint which could lead
to wrong geometries when the model was reset.
Task-number: QTBUG-67927
Change-Id: I5100b28a741cc816133a229c422f9abf83f2187e
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
tst_QHeaderView::sectionSizeHint() did set some values but did not check
the return values.
Change-Id: Id606d7a06935a3d6783bc9a8c10bf05d953adec6
Reviewed-by: David Faure <david.faure@kdab.com>
This supplements b1945604a7, which
removed the qrc file in favor of test/test.pro coding for it.
Change-Id: I15507c89ca14fa6e6b8223de671ffff7092272d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Replace with QSignalSpy or QTRY_COMPARE when possible.
Task-number: QTBUG-63992
Change-Id: I18dc8837301424855487a12ee62451a5aeb21bf0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Put it in alphabetical order like the rest of the list.
Change-Id: I3da3bb68d1847f53419bb79490b946c935ebb518
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
They didn't exist up until now, and future patches rely on them, so
add them.
Change-Id: I8afdb9417263b45d43355c688a813bdf99ea5fc8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The test relies on the existence of qt-project.org in resources. It
contains mimetype data and is automatically added. For static builds on
MSVC it is only added if it is actually needed though.
Change-Id: Icd1d74466607196f9b635205f7cb4d9b300ec4b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If builtin_testdata is present additional data ends in inside of
resources so that tests can access this data when needed. The addiitonal
data has to be taken into account in the resource engine's test.
Change-Id: I10de6b9612ca49b314d77cfadd5b2360a5d90d53
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: I399cc1aed3ee4151cf6adfd8f8780d8975604d52
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
The formatting of the output from QSslCertificate::toText has
changed slightly from before, so it no longer matches the test's
data.
From what I can tell we just do a manual sanity check and create
a new file with the new output and then augment the test.
Task-number: QTBUG-67463
Change-Id: I751e5a3f9a28015f97c895cea47384704fd68e38
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The added test case is the binary JSON equivalent of
{"a":{"š":null}}
with two modifications. First, the length of the string "š" has been corrupted
to 0xFFFFFF00. Second and more import, the Base::size field of the inner object
has been reset to 0.
On its own the first modification would normally trigger a validation error.
However, due to the second modification the Value::usedStorage for the inner
object evaluates to 0, completely disabling all further validation of the
object's contents.
Attempting to convert this binary JSON into standard JSON will lead to the JSON
writer trying to construct a QString of length 0xFFFFFF00.
Fixed by validating also objects with usedStorage == 0.
Task-number: QTBUG-61969
Change-Id: I5e59383674dec9be89361759572c0d91d4e16e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The added test case is a binary JSON file describing an array which contains
itself. This file passes validation even though attempting to convert it to
plain JSON leads to an infinite loop. Fixed by rejecting it in validation.
Task-number: QTBUG-61969
Change-Id: Ib4472e9777d09840c30c384b24294e4744b02045
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This method takes a pointer+size pair, but begins reading through the pointer
without first checking the size parameter. Fixed by checking the size parameter.
A new test case is added with an empty binary json file. Although the test does
not fail under normal conditions, the problem can be detected using valgrind or
AddressSanitizer.
Task-number: QTBUG-61969
Change-Id: Ie91cc9a56dbc3c676472c614d4e633d7721b8481
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the application closes, we should clear the cache to not run into
memory sanitizers claiming that we leak.
Change-Id: Ibf9fcda107be6b7f3ed414d7651080aa1f61a3a5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
This allow to customize easily placeholders in QLineEdit by example.
Change-Id: I2bb379164376e1d88b42d6c86c2e5b8df99fbc56
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When showing a condensed font with AnyStretch, we should
not apply any stretch to the font (and if a stretch is
requested, we should calculate the actual stretch based
on how much the font is already stretched or condensed).
This usually works as expected, however, when using
QFont::NoFontMerging as the style strategy, we would
scale the glyph advances by the stretch of the font
since the calculated stretch of the font engine would
be overwritten by the actual stretch. In the case where
we use font merging, this would be done for the multi
engine, so we would not get the same issue, since the
text engine gets the stretch from the actual font engine
and this still has the original, calculated stretch
set.
Note on the test: We can't use testString() for this,
since it contains a space, and the test font does not
have a glyph for this, so we will end up merging a
different font for the space, giving us a slightly
different advance.
[ChangeLog][QtGui][macOS] Fixed display of condensed fonts
when NoFontMerging is in use.
Task-number: QTBUG-63800
Change-Id: I5b05e0dbfc8ae4b5d10c621ecb0975f53fda9483
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When the page size was not valid on the new printer, it would end up
having the wrong page size name on the new printer. What should happen
in this case is that it should set the originally set page size as a
custom page size on the printer instead.
Task-number: QTBUG-62221
Change-Id: Iaca34ae262f5d0685ca60e4ca4b38229a2283289
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
The reason it crashed was this:
1. Button was pressed => _panTimer started with the graphics view as
destination.
2. Button was released => the graphicsview is destroyed
3. 300 ms later: Qt tries to deliver TimerEvent from _panTimer to the
graphics view. Unfortunately, the graphics view is deleted, but Qt
doesn't know that... (*crash*)
We therefore chose to start the timer with a destination we are controlling the
lifetime of: the QMacPanGestureRecognizer. Inside the timerEvent of that we can
check if the actual target is already destroyed.
Task-number: QTBUG-60404
Change-Id: Iff8f5b7217de42c4c5cf551ca507f0cff1c99a78
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
paintEventCount() is currently flaky on macOS. It gets extra paint events after
qWaitForWindowExposed() returns, which causes the following assertions to fail.
Add the wait that was removed in 0cb940b1d3 back
to fix those failures.
Task-number: QTBUG-68032
Change-Id: I68e0b6008de40922ec740291dfdd1842e0f62f89
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This warning was removed when we refactored QCocoaMenuItem::sync().
This change amends 8412009de6.
Task-number: QTBUG-68013
Change-Id: I0d65109dff5f82db530b6bdced96c05692af6b4b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Replace the code for isRowSelected and isColumnSelected with
a much simpler algorithm for deciding if a row/column is selected.
In a model with a cross-hatch of unselectable indexes, the return values
of is(Column/Row)Selected would depend on the order in which the
selections were done.
Task-number: QTBUG-18001
Change-Id: I6aa4b1df7c07fae469a686041927fa8c42bc9b16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Home/End don't actually work on macOS. The "select all and delete" key
was not actually testing anything at all.
Change-Id: I44d3e9dd27da418afd699bf8720d5369325d20df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
... but only if the host it came from is an EXACT match. Also only apply
the cookie if the url is an EXACT match.
[ChangeLog][QtNetwork][QNetworkCookieJar] Cookies will no longer be
rejected when the domain matches a TLD. However (to avoid problems
with TLDs), such cookies are only accepted, or sent, when the host name
matches exactly.
Task-number: QTBUG-52040
Change-Id: Ic2ebd9211c48891beb669032591234b57713c31d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
checkReason_ActiveWindow() started failing on Windows when run together with
other tests, but still passed on its own.
The offending tests was checkReason_focusWidget(), which showed a window but did
not wait for it to be active.
After adding this wait the whole test executable passes on Windows as well.
Amends fd87c8da82.
Change-Id: I384bc45176fcd7bf6f491a4f39b46464ba45693b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This way the platform window is destroyed in a timely manner, preventing
redundant close events from the window system.
Task-number: QTBUG-43344
Change-Id: Ifdfca59ceacef54405f1c227c493dc514a1b27ea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Instead of a local wrapper for it.
Change-Id: I0708dfad44b3db0c7a13e75ba5b4193ab50ac315
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Although QPainter::drawImage()/drawPixmap() would render images scaled
according to their devicePixelRatio(), that would not happen for
drawTiledPixmap() and when using a textured brush. Implemented here,
in combination with the pending "High-dpi drawTiledPixmap (raster
paint engine)" commit.
[ChangeLog][QtGui] Fix drawTiledPixmap() and texture-brush painting with high-DPR images
Task-number: QTBUG-67248
Change-Id: I037e3f897fa708038a0222d3b0c61c7842d87961
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Don't use QCursor when we can position a mouse relative to the
window coordinates via QTest::mouse*() functions. Even the way
QCursor was user here seemed to be hackish. This hack apparently
was there to make the test pass on macOS, I have verified that
the updated test continue working on this platform.
- Remove Q_OS_QNX ifdef, as this test does not depend on QCursor anymore.
- Remove QTest::qWait()-s. Unconditinal waiting should not be used.
- Add better comments.
- Other minor things.
And move tst_QComboBox to use QTEST_QPA_MOUSE_HANDLING code path.
Eventually we want to deprecate the legacy code path.
Change-Id: Ib72f324b5197d0fd66fc32b8c1c7509e58838e04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The NEON implementation uses rsqrt and thus can not be taken on 0, so
replace the minimum with something close to zero instead of zero.
Task-number: QTBUG-59961
Change-Id: Ia39e45be675b056c1e22900495ce9ba4e8b70e5f
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
This was originally added so that you could replace a T with
QAtomicInteger<T> in the same class and still keep ABI. However, for
legacy reasons, on 32-bit x86, types larger than 4 bytes keep an old
1990s alignment of only 4 bytes, but modern std::atomic<T> for those 8-
byte types enforces an alignment of 8 bytes. Therefore, the requirement
to keep alignment is not possible to guarantee.
In other words: you may not replace T with QAtomicInteger<T> or
std::atomic<T> and assume no ABI breakages in all platforms.
This is a requirement to implement atomicity. An 8-byte type aligned to
only a 4-byte boundary could cross a 16-byte boundary or, worse, cross a
cacheline boundary. Crossing the 16-byte boundary could be bad on some
processors, but crossing the cacheline boundary (addresses ending in
0x3C, 0x7C, 0xCC and 0xFC, or 4 out of 64 possible addresses or 6.25%)
is always bad: the CPUs cannot guarantee an atomic load or store
operation.
See also <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71660>.
Task-number: QTBUG-67858
Change-Id: If90a92b041d3442fa0a4fffd15283e4615474582
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
RCC generates code that registers resources automatically on program
startup via global constructors. When linking statically and nothing
references the symbols in the .o file compiled from the RCC generated
code, then the linker will discard the embedded resources and they will
not get initialized. That is why for static linking it is necessary to
explicitly initialize resources using the Q_INIT_RESOURCE macro.
We can avoid the need for the explicit initialization in the context of
plugins that are statically linked into the application. resources.prf
can generate a .cpp file with a helper function that contains all the
Q_INIT_RESOURCE calls for all resources in the plugin. That helper
function in turn is injected into the plugin entry point, which in turn
is guaranteed to be included in the final binary.
Change-Id: If1abf9c85ef92935020af073b989c58c1ae6ca63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Added a few functions to derive keys from passwords. Currently it
supports PBKDF1 and PBKDF2 as defined in
RFC 8018 ( https://tools.ietf.org/html/rfc8018 ).
[ChangeLog][QtNetwork][QPasswordDigestor] Added QPasswordDigestor
Task-number: QTBUG-30550
Change-Id: I2166b518bd8b54e3486514166e76fd9ba2f219c8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch adds the ability to decode keys which are encoded with PKCS#8
using the generic back-end (used in winrt and secure transport).
It works on both WinRT and macOS; however QSslKey seems unused in the
WinRT backend and it seems only RSA keys can be used for certificates
on macOS. Meaning that DSA and Ec, which in theory* should represent
their unencrypted versions, can't currently be tested properly.
* Can also be confirmed by loading the key using the ST or WinRT
backend, calling toPem(), writing the output to a file and then loading
the unencrypted key using openssl.
[ChangeLog][QtNetwork][QSslKey] Added support for PKCS#8-encoded keys
in the generic SSL back-end (used for SecureTransport on macOS and for
WinRT). Note that it does not support keys encrypted with a PKCS#12
algorithm.
Task-number: QTBUG-59068
Change-Id: Ib27338edc7dbcb5c5e4b02addfdb4b62ac93a4c3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
That check is flaky on Windows. It doesn't seem to be testing Qt functionality.
I also don't see CreateFile2() documentation mentioning any guarantees that
opening the same file twice would give the same HANDLE each time.
Change-Id: Ica2e60571ae9fc39bf822803a2a9dd6add8323d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The manually maintained qrc file was missing corrupt_clut.bmp among
others.
Change-Id: I8916ba76a63950de03f25814d893306d046d273d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a key press is received which is not spontaneous then it needs to
be manually sent as a shortcut override event to ensure that any
matching shortcut is triggered first. This enables emulation/playback
of recorded events to still have the same effect.
[ChangeLog][QtWidgets] Sending a key press event with sendEvent() now
sends a ShortCutOverride event first to the widget to trigger any
shortcuts set first.
Task-number: QTBUG-48325
Change-Id: Iafcc2cdb1773bffe89edaeb0abc44cd5a51088e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QNetworkRequest is already aware of the Last-Modified header but
has been lacking support for the If-Modified-Since, ETag, If-Match
and If-None-Match headers. These headers are used with HTTP to
signal conditional download requests.
See RFC 7232 for more information.
Change-Id: I248577b28e875fafd3e4c44fb31e8d712b6c14f1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sometimes it is hard to find the line, when the warning
"QObject::connect: invalid null parameter" appears in the log.
This change adds the class names of the sender and receiver
to give a hint where to search for the wrong call to connect.
Change-Id: I00cead7d943f96d60f198cb3f0bed34ba10285c5
Reviewed-by: André Hartmann <aha_1980@gmx.de>
QTestEventLoop (conveniently so) takes care of timeouts thus no
external QTimer/handling logic needed at all.
Change-Id: Id65ea928daec1e7d9380107e63916896f19d3d14
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtWidgets] QApplication no longer sends a mouse move event
to the entered widget if it sends synthetic enter and leave events.
Task-number: QTBUG-67736
Change-Id: I75daaffd53f1ddc2bc4d7df67382cbc22d3eb6fc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When generate_expected_output.py is run for an in-source build, the
raw output contains no paths to the sources for the script to whittle
down, as it does for shadow builds, to just the path from qtbase down.
So kludge together some extra regexes that can fix that up and tweak
some relevant code to provide them with the data they need.
Change-Id: I656d7126087bd9ad20b2af6835fba314d90a171d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The documentation states that if you have a range of
0.00-2.00 with the number of decimals set to 2 then
any number up to 9.99 would be considered intermediate.
This is because the number of digits still matches both before
and after the decimal point. If it is 10.0 or 9.999 then
it is still considered invalid.
In the case of 9.999 being invalid in this case, the documentation
is corrected as this was incorrectly indicated as Intermediate,
as the code indicates it as Invalid.
Change-Id: I07b433e856f355916a1240deafdf4ef58e680639
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
The drive has to be defined for every Windows configuration (also
including winrt).
Change-Id: I94a3131b8aec20cda97dc78f55b1d87aa10240e4
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This static method can be called before QGuiApplication is created. At
that point there is yet no primary screen, so the implementation
needs to guard against dereferencing a nullptr.
Task-number: QTBUG-67309
Change-Id: I6b7b9e97b1c3c79bf2f9c6d6247c3b10f39f7a55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
To read data from a named pipe, QWindowsPipeReader uses the ReadFileEx()
function which runs asynchronously. When reading is completed and the
thread is in an alertable wait state, the notified() callback is called
by the system, reporting a completion status of that operation. Then the
callback queues a readyRead signal and starts a new sequence. The latter
is skipped if the pipe is broken or the read buffer is full.
Thus, if an application does not run the event loop, the next call to
QWindowsPipeReader::waitForReadyRead() should emit the queued signal
and report true to the caller even if no new read operation was started.
Change-Id: I37102dbb1c00191d93365bfc2e94e743d9f3962a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
1. If a request was redirected or some error was encountered, we
try to reset the uploading byte-device.
2. Disconnecting from the byte-device is not enough, since we have a
queued connection, _q_uploadDataReadyRead() gets called even if
byte-device was deleted and thus sender() can return null -
we have to check this condition.
3. Update auto-test with a case where our server immediately
replies with a redirect status code.
Task-number: QTBUG-67469
Task-number: QTBUG-66913
Change-Id: I9b364cf3dee1717940ddbe50cba37c3398cc9c95
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This failed (occasionally) in finding the editor widget, so wait for the window
to be shown properly. Also enter the event loop with QTRY_VERIFY and not for a
fixed time of 1 s.
This however just moved the point of failure. Now the test fails since the
clearing and setting of focus does not dismiss the editor widget sometimes, so
still blacklist it.
Task-number: QTBUG-67282
Task-number: QTBUG-66216
Change-Id: Iec598609fce23a25d7b955082d0973685d612715
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Fix a mistaken #ifdef that should have been #if; and only call
QTimeZone::availableTimeZoneIds() once in transitionEachZone_data(),
while switching to use of a ranged-for.
Change-Id: Id27aae9ef450f21350283099c892ca7173884b94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_COMPARE instead of a wait followed by QCOMPARE. Unless the condition
doesn't change and the wait provides the opportunity for things to go wrong.
Task-number: QTBUG-63992
Change-Id: I13474a45f1f4df9d77a418729a5748235ae0dd1a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
For the time being, no more stretched QComboBox. They
were already looking bad before and nobody complained,
so it's a non-issue. In the future, we might use square
combo boxes in the same way as we do for push buttons
but for non-editable QComboBox only.
Removes what is now dead code, including some leftovers.
tst_QMacStyle updated to reflect size changes to accom-
modate the focus ring.
Change-Id: I60fac86b9acb52cc96373bca0b3cad598ec4f1e7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QTextDocumentWriter only supports a small subset of table formatting
when exporting to ODF-format. This patch adds more formatting
capabilities to the ODF exporter:
- table border support
- table alignment
- table width
- respect column constraints (column widths)
- add a tab before soft line breaks. This will avoid causing the last
line to stretch all over the cell in justified paragraphs.
With this patch, line height settings are now exported, too.
[ChangeLog][QtGui][QDocumentWriter] QDocumentWriter now supports table
borders, table alignment, table width, column widths, line height and
image resolution when exporting QTextDocuments to ODF files.
Task-number: QTBUG-63581
Change-Id: I2d269ef0f842e73af64d48bfef531d5fa3078088
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When we load DER-encoded keys in the openssl-backend we always turn it
into PEM-encoded keys (essentially we prepend and append a header and
footer and use 'toBase64' on the DER data).
The problem comes from the header and footer which is simply chosen
based on which key algorithm was chosen by the user. Which would be
wrong when the key is a PKCS#8 key. This caused OpenSSL to fail when
trying to read it. Surprisingly it still loads correctly for unencrypted
keys with the wrong header, but not for encrypted keys.
This patch adds a small function which checks if a key is an encrypted
PKCS#8 key and then uses this function to figure out if a PKCS#8 header
and footer should be used (note that I only do this for encrypted PKCS#8
keys since, as previously mentioned, unencrypted keys are read correctly
by openssl).
The passphrase is now also passed to the QSslKeyPrivate::decodeDer
function so DER-encoded files can actually be decrypted.
[ChangeLog][QtNetwork][QSslKey] The openssl backend can now load
encrypted PKCS#8 DER-encoded keys.
Task-number: QTBUG-17718
Change-Id: I52eedf19bde297c9aa7fb050e835b3fc0db724e2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Properly handle single protocol TLS configurations. Previously,
due to the use of generic (non version-specific) client/server method
they worked as ranges of protocols instead. This also fixes a couple
of previously broken tests.
Task-number: QTBUG-67584
Change-Id: Ied23113a4fab6b407a34c953e3bd33eab153bb67
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reduces the timeout from 10 seconds to the default 5, but the tested events
(resize events, painting) seem like something that should happen in 5 seconds.
Change-Id: I1d12372f37264bf7be64096e43813cd03f567102
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
BuiltIn inputs shouldnt be translated into a code input. We comment the
input line for this variables
Change-Id: I3b7d2fd06afc6a122d90a999fc5a5246fc93234e
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
The cost for the pixmap cache was calculated in bytes but
setCacheLimit() takes the size in kilobytes. This lead to the
situation that all values above 2097152 overflowed and disabled
the caching completely. Fix it by calculating the cost in
kilobytes as it is done in QGLContext.
Task-number: QTBUG-45293
Change-Id: Ib8dc2360c8f3201ce0b615a04c38b5ccaa8fc6cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add functions for converting QImage to HBITMAP and back
supporting additional formats of QImage (RGB888, RGB555,
Indexed8 and Mono). Add test with roundtrip to tst_qimage similar
to tst_QPixmap::toWinHBITMAP().
Task-number: QTBUG-51124
Change-Id: Ib568898e7162686bfa527d828785628eb0b78e21
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It's useful when you need to check how long a hash will be without first
generating one.
[ChangeLog][QtCore][QCryptographicHash] Add a static method, hashLength,
which returns the length of the output of a hash function in bytes.
Change-Id: Id6a454016523de83d157fd95c50105c6db4bb1d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test was failing because the files it expected to create were not actually
visible on the disk.
This was because 189e9c93d7 made QTemporaryFile
use unnamed files if the file name is not actually requested. Fix by forcing the
temporary file to be made with the requested name.
CI has not caught this because the test executable is marked insignificant_test
on Linux.
Change-Id: Ibe0244fdfcc66acf3be4314da51b4c0b3b520b71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Except RHEL-6.6 and 7.4
It was blacklisted in f3939d943e, along
with a lot of other entries. No specifics are known about why it was
blacklisted originally, but now it only fails on RHEL because they
use OpenSSL 1.0.1.
Change-Id: I6d1d1b7b7bf5386b2115b8780163550cf03bbad7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On Wayland, manipulating the clipboard requires an input event serial, which is
not possible to get unless the compositor sends us input events.
Change-Id: If5231a5db85f8d6ad988ea93f240cee0c3466f9f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This makes the tests pass on Wayland compositors that don't automatically give
focus to newly created windows. Such as a headless Weston, which is very useful
for testing.
Task-number: QTBUG-66846
Change-Id: I502504b333499c89be193a3ebc19d41264a13580
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Instead of an unconditional wait.
The QSKIP is necessary because the PDF format is non-native and the Windows
implementation of QPrintDialog doesn't work then.
The macOS implementation has the same warning, so add the check for that OS
as well.
The test has previously passed, since it hasn't seen not actually opening the
dialog as an issue.
Change-Id: Ib53e378b232580358f13e0c5206404412f9e6ee2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is a long overdue change so we don't break ADL of operator|.
I think will not break source or binary compatibility.
The problem is code like this:
namespace Foo {
struct MyStruct;
MyStruct operator|(MyStruct, MyStruct);
void someFunction() {
fooLabel->setAlignement(Qt::AlignLeft | Qt::AlignTop)
}
}
This would be an error before as ADL would find only the Foo::operator| and not
the global one since the arguments are not in the global namespace.
After this change, ADL works fine and this code compiles
This bites people with misterious error, see questions on
https://stackoverflow.com/questions/10755058/qflags-enum-type-conversion-fails-all-of-a-suddenhttps://stackoverflow.com/questions/39919142/broken-bitwise-or-operator-in-a-qt-project
[ChangeLog][QtCore] QFlags's operator| for enum types in the Qt namespace are
now declared in the Qt namespace itself.
Change-Id: I021bce11ec1521b4d8795a2cf3084a0be1960804
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The TZ database has recently revised its ccount of when they skipped a
day to cross the international date line, from skipping Jan 1st 1995
to skipping December 31st 1994. So Move the before-days check to
December 30th; and correct the Feb 2nd that was meant to be Jan 2nd
(and does need to remain so, for compatibility with systems with out
of date data).
Task-number: QTBUG-67497
Change-Id: I5b9483c553205817f995f91793662a5a85e03192
Reviewed-by: Liang Qi <liang.qi@qt.io>
OCIBindByPos2 is only needed when using execBatch(), binding data that
is longer than USHRT_MAX works for exec() so this is left unchanged.
Change-Id: Ifdcf91939d184f225d24c13052ea0b81611ecf91
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no need to qWait() before a QTRY_VERIFY. qWait() will also
intermittently handle events while waiting, so calling it in a loop isn't
necessary.
Change-Id: Ica7fbf18c03e673213dd9b72f31f71937cdcb145
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_ASSERT(mimePrivate.fromCache) at qmimedatabase.cpp:218
which I added in commit 7a5644d648, was being triggered when calling comment()
for invalid mimetypes such as db.mimeTypeForName("").
Change-Id: I8037041a4b435d2a5ba24ec94b7858e38b2f0bf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the db isn't valid, then that's the actual issue, not the fact that we're
getting the same invalid db (with the same driver QSqlNullDriver) in
multiple threads.
Change-Id: I95490818ed78e741c3823e115f139c2cff01b0b1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Also use data-driven test to reduce duplication.
Change-Id: I9516e52267cb3c7b239030fd73dbbf23ac8f52f7
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes an irreversible global change: tests that do it will mess
with other tests. So make sure they're all last. This required
splitting up one test; and revealed another that secretly depended on
being run with C as default locale.
Task-number: QTBUG-67276
Change-Id: Ic24ef48b2c9bd5c37c1f11260b437628019624ca
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
The test creates client and server sockets with mismatching protocol versions,
trying different combinations, for example: 1) server (TLS 1.0) vs
client (TLS 1.2) or 2) server (TLS 1.2) vs client (TLS 1.1), etc.
Since TLS v < 1.2 does not support signature algorithms, they are ignored
and handshake is always successful. But our new OpenSSL 1.1 backend uses
generic TLS_client_method and TLS_server_method when creating SSL_CTX.
This means, both server and client will support TLS v. 1.2, they
will have no shared signature algorithms, thus handshake will fail
with an error string similar to this:
"tls1_set_server_sigalgs:no shared signature algorithms".
For OpenSSL 1.1 this test makes no sense.
Task-number: QTBUG-67456
Change-Id: Ibb2a12eea5e5c0ebaeee7d0719cc721ecf4763e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Do not let a global qtlogging.ini interfere with an autotest.
This works around an issue on Ubuntu 17.10
Task-number: QTBUG-67385
Change-Id: I0d02835eb7a561b43fe0b98f4383c170c6d51303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
As setting cursor position is not allowed on Wayland.
Task-number: QTBUG-66824
Change-Id: I1f065b7072dff13b1ee8a4fc3ccec347e8d71ed1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Uses the scripts and tests we already have for lancelot as a painting
benchmark.
Change-Id: Idf8a55e2261162e619f6dbb567dc19f8dc96da4e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead use QSignalSpy to wait directly for the expected events.
Change-Id: I319302ea7177fe690b5d885347c505454904518e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
It is suspected that the fault actually lies in CI infra.
Amends e3cf2a1ae9.
Task-number: QTBUG-66311
Change-Id: I967da283f0b94be1d0b99481d0cbd15ca7f98d45
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These two places were sort of manually implementing QTRY_VERIFY except that they
never time out.
Change-Id: I136e6c7400194327c0475c6acfc019825ccec1b5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Use QSignalSpy::wait or QTRY_VERIFY instead. This shaved off ~200 ms of the
running time of the test and is more reliable.
Some unconditional qWait()s still remain in this test. They are giving an
opportunity for the wrong thing to happen and thus are not waiting for any
specific condition to be fulfilled.
Task-number: QTBUG-63992
Change-Id: I25a4470fe8d6a5b8b5039b3ed77321d24faa1707
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This method will make QRegularExpression on par with QRegExp and
will allow to replace this class when a wildcard expression can be
set through an API (e.g. QSortFilterProxyModel::setFilterWildcard).
For other use cases, see QTBUG-34052.
[ChangeLog][QRegularExpression] Implemented support for wildcard
patterns.
Warning: QRegularExpression might not give the exact same result
as QRegExp as its implementation follows strictly the glob patterns
definition for the wildcard expressions.
Change-Id: I5ed4617ca679159430c3d46da3449f6b3100e366
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Use QTRY_VERIFY instead of hard-coded wait for the tooltip to appear.
Also use QTRY_VERIFY to verify that no top level widgets are left over
to account for tooltips and effect windows.
Change-Id: Ia9835fdc480c6abb034f6fc4ad3d6b32751ee536
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
sync-up with qt-creator; no effect on qmake.
comment on cherry-pick: this is actually a lot more than a cherry-pick,
because the dual VFS needs to deal with the file ids which were
concurrently introduced on the qmake side.
Change-Id: I2c1eb16c97526fa275a1c6a2eae9266d385859ac
(cherry picked from qtcreator/424639ecac9d2e404d2bfaff7f46b45ed98664b8)
(cherry picked from qtcreator/a8010b0fff47d903d4a1f80e3adb1a2ef41beb33)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
when the QFile object is already constructed, querying whether the file
exists is actually cheap, so do it right away instead of later on
demand. that makes the calling code a bit cleaner.
fwiw, that we need to explicitly query the file's existence at all is a
result of QFile's completely useless error "codes" (which merely say
which function failed, as if the caller would not know).
Change-Id: Ifec39d05b1713d8128046f679287e510f10e45dc
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
(cherry picked from qtcreator/5ba32e3484ead2e35cc7732dcd59a97e7459dbfd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Has been flaky on those platforms in CI.
Task-number: QTBUG-67254
Task-number: QTBUG-66216
Change-Id: Ia1a718a23b1992fcc0e85bf49b714bc43acc4ce2
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Otherwise the ::debug() test fails when a build does not print qDebug()
messages.
Change-Id: I3f3c4b3c7d74004abe5ed8d7ac52164d4f88ef1f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is what the other reporters also do, in various forms.
Task-number: QTBUG-67351
Change-Id: I16f2c4e0991176145ee0fbcbbfeeda071603a3c2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Also expands the tst_qsqlquery::batchExec() test to account for this
case and generally test the functionality. In addition it is made to be
more robust to avoid any discrepencies with the testing data. The test
in general is also cleaned up to enable more of it being tested with
the different database drivers where possible.
An expected fail is added for MySQL due to the fact that it has a bug
where null timestamp entries are being converted to the current
datetime when adding it as a bind value.
Change-Id: I0061bd1c69ae35b4858afc49420f13ce59cf48ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Many subclasses of QIODevice have a functionality to block execution
until some asynchronous I/O operation completes. In case we are using
QWinEventNotifier, a typical reimplemented waitFor{ReadyRead
|BytesWritten}() function could look like:
if (WaitForSingleObject(notifier.handle(),...) == WAIT_OBJECT_0) {
notifier.setEnabled(false);
ResetEvent(notifier.handle());
bool res = GetOverlappedResult(...);
...
return true;
}
Despite the fact that the operation ends synchronously, it leaves the
notifier in a state that indicates it has received the event, so its
next call to setEnabled(true) will produce a fake notification.
So, we should reset a notifier's history before enabling it again.
Change-Id: I62a9dd809ce6a7a40e9d8038f2a49299b36f8142
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Clipping enabled state would not always be correctly restored for the
raster engine (other engines work fine). The raster engine's QClipData
object is sometimes shared between painter state objects on the
save/restore stack. QClipData has its own enabled flag, and this could
then come out of sync. Fix by making sure we sync the enabled state on
restore.
Task-number: QTBUG-58789
Change-Id: I81e6254ebb93df6e153bbef58e32a885273e3224
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Previously, we would divide by zero in BezierEase::findTForX if factorT3
was zero when solving the cubic equation.
This change fixes the problem by adding solutions for the special cases
where the cubic equation can be reduced to a quadratic or linear
equation.
This change also adds tests that cover cases where the equation becomes
quadratic, linear or invalid.
Task-number: QTBUG-67061
Change-Id: I2b59f7e0392eb807663c3c8927509fd8b226ebc7
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
There are a couple of Qt classes where you almost always use the
same signal, for example QTimer::timeout, QPushButton::clicked,
and QAction::triggered.
Simply doing timer.connectTo([]{}) is much more convenient, less
tedious and even fun.
Not overloading connect() as it would be confusing to see the
receiver as first argument.
And not naming it onTimeout, as that's a popular way of doing it in
other frameworks. People would assume you could use on* with any signal.
If we ever have on* it should be all or nothing.
[ChangeLog][QtCore] Added QTimer::connectTo(), a shorthand way of
connecting to the timeout() signal.
Change-Id: Ida57e5442b13d50972ed585c3ea7be07e3d8e8d2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This removes the following functions from Qt5CoreMacros:
- qt5_use_modules(...)
Task-number: QTBUG-63519
Change-Id: I59769060a3a93686bf319b558c0ede55755fdb70
Reviewed-by: David Faure <david.faure@kdab.com>
disableNotifiersInActivatedSlot(disable_signaled2) fails, if a signaled
state of the event #2 is detected prior to the event #1. In this case,
we get a timeout on waiting for event #1 which was disabled by the
first notification.
So, accept a disabled state of the notifier in condition for successful
exit from the loop.
Change-Id: I8a2fe76f8ec9362556d1ca1fe0be39a93ed58977
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Adds the feature of adaptive decimal step sizes for the QSpinBox and
QDoubleSpinBox. By performing a calculation in
QAbstractSpinBox::stepBy() we continuously set the step size one power
of ten below the current value.
So when the value is 1100, the step is set to 100, so stepping up once
increases it to 1200. For 1200 stepping up takes it to 1300. For
negative values stepping down from -1100 goes to -1200.
It also works for all decimal values. 0.041 is increased to 0.042 by
stepping once, and so on.
The step direction is taken into account to handle edges cases, so that
stepping down from 100 takes the value to 99 instead of 90. Thus, a
step up followed by a step down -- or vice versa -- lands on the
starting value; 99 -> 100 -> 99.
Setting this property effectively disregards singleStep, but preserves
its value so that it takes effect again when adaptive decimal step is
disabled.
Adaptive decimal step allows values to be easily set to reasonable
levels. If the spin box value is 12000, changing to 13000 often makes
more sense than to 12001. The feature is turned off be default, when
single stepping is desired.
The accelerated property allows values to be changed quickly, as well,
but it is imprecise. Holding down the button makes it hard to land on
an even thousand, like 12000 or 13000. Often you end up somewhere
nearby and would need a second adjustment to get to an even hundred or
thousand.
[ChangeLog][QtWidgets] Add option of adaptive decimal step size for
QSpinBox and QDoubleSpinBox.
Change-Id: I9f286479b821e240c8ea05c238932fc128c582bb
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This test has been flaky on openSUSE in CI. The problem was that the window is
sometimes resized or removed while processing events after adding the rectangle
item to the QGraphicsScene. When the same mouse event is reused again, it uses
wrong screen coordinates. QGraphicsScene handling of mouse events then looks for
items under cursor at the wrong coordinates, does not find any items and thus
doesn't accept the mouse event.
Fix by using QTest API for simulating mouse events. Also wait for changed signal
rather than blindly running one iteration of event loop.
Task-number: QTBUG-67212
Task-number: QTBUG-66216
Change-Id: I968f9470c6f8803d01cebeda6f12ad76b4fd5293
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Thanks to QTBUG-61373, this qmake function was called with
/usr/local/5.10.1 as baseDir, which isn't absolute, leading to an
assertion failure. We could raise the error within qmake but it
proved easier to simply resolve any non-absolute baseDir using PWD,
before trying to use it as an absolute path.
Did the same for $$absolute_path(). Documented both. Adjusted the
assert that caught this to report any non-absolute path that upsets
it. Added simple tests, fixed an existing test.
Task-number: QTBUG-66156
Change-Id: Icfef2e2f5b236e071177c9beffa38d71bf404292
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We can use the QT_LIB_FOO #defines instead of our own WITH_FOO ones to
determine if a library is available. Also, it doesn't currently make
sense to refer to libraries which are not part of qtbase here. We might
add that in the future, but QtScript (being deprecated) is probably not
the first one we should add.
Change-Id: I7f2397ca5499ba6003088478161182e960e815fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
They are faster, and using them makes it paint commands be the most
CPU intensive part of lancelot instead of regular-expression matching.
Change-Id: Ifabf1081c48a83ce089660049051428fd3a43042
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When the thread that got woken up by release() is supposed to release()
to wake up another thread, we were deadlocking. This happened because we
cleared the bit indicating that there was contention when the first
release(). Instead of storing a single bit, we now store the number of
threads waiting.
Task-number: QTBUG-66875
Change-Id: I72f5230ad59948f784eafffd15193873502ecba4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
selectFile() is a no-op if the dialog is visible and
its line edit has focus, which will happen at some
point after show() is called.
In other words this is a race, and the test will pass/fail
depending on the timing of the platform implementation.
Task-number: QTBUG-66536
Change-Id: I03957edb6496d17af7a8ed1d4ca86435375e0d40
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don’t assume that there is an active modal widget
on QApplication::focusChanged(). That signal can also
be emitted on focus clear during dialog destruction.
Task-number: QTBUG-66536
Change-Id: I20c64339c56a52b39c26a7683b62779deba576d9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add qWaitForWindowExposed() calls in addition to the
existing qWaitForWindowActive().
Depending on the platform, window activation events may
be synchronous, which means that a window can (and will)
become active before it becomes exposed.
This causes test failures for tests that count paint
event, and does not wait-for-exposed, when the expose/paint
event is delivered after waitForWindowActive() has returned.
We need to keep the waitForWindowActive() as well: the
test has several qWait() calls with he comment:
“Increase the probability of window activation not
causing another repaint of test items”.
These qWait() calls can possibly be removed in a future
commit.
Task-number: QTBUG-66536
Task-number: QTBUG-61967
Change-Id: Ie61bba058b583fdd1d80e600475aff3efccc32eb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test function was removed from the blacklist as
a part of the cleanup in 2056bc6b, but is still flaky
on CI.
Change-Id: I348ed167dff6fd618ede28456ada6da86ee341cd
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Resizing is broken on Wayland EGL on Intel Mesa. Move resizing into a separate
test and skip it on Wayland it until it's fixed in Mesa.
Task-number: QTBUG-66848
Change-Id: I9450a5a588b0f5d8f0bd0210aae2dc72aa48d622
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QRasterPlatformPixmap::systemOpaqueFormat returned QPlatformScreen::format
without checking that the format was actually opaque.
This caused several QPixmap tests to fail on Wayland because Wayland
compositors don't communicate the native format of the screen, just a list of
supported pixel formats, so we just return ARGB32_premultiplied in
QWaylandScreen::format().
Rename the method systemOpaqueFormat to systemNativeFormat since that's how
it's used most of the time. And do a conversion when we actually care whether
the format is opaque or not.
Task-number: QTBUG-51748
Change-Id: I47dc1c3f185fb802016ca361206d47d02e8d3cf1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Although not defined, the jpeg comment field 'content' is treated as
utf-8 nowadys. At least exiftool and exiv2 (tested via gwenview) are
expecting utf-8 here. So we should do the same.
Task-number: QTBUG-44709
Change-Id: If84dafac3e337c7993f09cd59792e721977c9adb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QTreeView is stretching the last section by default which was not
considered in this test. It worked by accident on linux because
there the default section size is 100 and the default window width
is also 100. On windows this was not the case and therefore the
test failed.
Task-number: QTBUG-51149
Change-Id: I9be1c1e942fc19817713773fe29d4afa93d73232
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This fixes the following:
- tst_QSqlDatabase::recordMySQL() to account for performance
improvements done for small integral types
- tst_QSqlQuery::nextResult() so that NUMERIC results are seen
as doubles
- tst_QSqlQuery::timeStampParsing() so that MySQL accepts the
CREATE TABLE statement
Change-Id: I68fb1d06dac12d500bb4596463f5bdd65cc9c226
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When using a virtual table inside a SQLite database it is possible that
it does not report the right number of parameters. Therefore we need
to account for this case to prevent it from crashing when trying to
bind parameters it thinks does not exist.
Task-number: QTBUG-66816
Change-Id: I3ff70bb1fe73091f43c3df53616f75858e451cfd
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When network access is disabled, every QNAM request returns a
QDisabledNetworkReply instance, which emits error and finished
immediately. However isFinished() was still false, which could confuse
application code.
Change-Id: Ifd43c86364b11a9583a38fde536e6c09c109b55f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Matches glibc commit 9a0cc8c1bd7645bf3c988890ffb59639c07a5812.
[ChangeLog][QtCore][QUrl] Fixed a bug in parsing IPv6 addresses with
more than 4 hex digits in a component.
[ChangeLog][QtNetwork][QHostAddress] Fixed a bug in parsing IPv6
addresses with more than 4 hex digits in a component.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=9a0cc8c1bd7645bf3c988890ffb59639c07a5812
Change-Id: I2701038131d91eb108aebb3bec16278e4efe3de2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit fdddb3a481.
After b85b272c26810e54a4ceb0707cf4569f87517b67, Windows 10
(msvc2017-x86) is tested on Windows 10 (msvc2017-x86_64). The
failure is gone.
Task-number: QTBUG-66798
Task-number: QTBUG-66216
Change-Id: Iba353b18b0be1346007fde674a9f768c4b9bf384
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit a0db55040d.
After b85b272c26810e54a4ceb0707cf4569f87517b67, Windows 10
(msvc2017-x86) is tested on Windows 10 (msvc2017-x86_64). The
failure is gone.
Task-number: QTBUG-66756
Change-Id: I4a8e8c62b4a021d144d570c38c4f4c10e8b1317c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Test Anything Protocol (TAP), was originally Perl's simple text-based
interface between testing modules and test harnesses, but has since been
adopted by a large number of producers and consumers in many different
languages, which allows colorizing and summarizing test results.
The format is very simple:
TAP version 13
ok 1 - test description
not ok 2 - test description
---
message: 'Failure message'
severity: fail
expected: 123
actual: 456
...
ok 3 - test description # SKIP
1..3
The specification [1] is very brief, so the implementation has been
based on how typical consumers behave, especially when it comes to
the undefined diagnostics block.
[1] http://testanything.org/tap-version-13-specification.html
Change-Id: I616e802ea380165c678510e940ddc6607d39c92d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Using QFileInfo to check if the file exists based on the filename
alone ignores the fact that all the expected files are embedded
as QRC resources.
The expectedResult() function already does a similar check, so we
can use that directly instead of checking twice if the file exists.
Task-number: QTBUG-66981
Change-Id: I0beb8d3503ed49682ae7d7e2a5172922fab5420d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This reverts commit 7257862fb2.
It has been reported that this patch causes widgets with certain effects
become invisible.
Task-number: QTBUG-60231
Task-number: QTBUG-66803
Task-number: QTBUG-66387
Change-Id: I9c3c4cf2f17ac639d1aee5489b665aa1e165af16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Rename getter QHeaderView::firstSectionMovable()
to QHeaderView::isFirstSectionMovable(), turn into a property
and fix \since.
Change-Id: Ica2ca43d22f3fd78ff63178ba75014807fc9b823
Reviewed-by: David Faure <david.faure@kdab.com>
Commit f55c73ede2 added various backendConfig methods;
API review for 5.11 pointed out that Config should not be abbreviated.
Change-Id: I3b294b44a030b2a6e4cdd034fa27583c228dfe42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the source model of a QSortFilterProxyModel has rows removed, a
mapping is performed in order to figure out which corresponding rows in
the sorted and filtered view of the model are affected. In doing so it
constructs a vector of removal intervals which are subsequently used to
emit rowsRemoved signals. In the case where many rows are removed (e.g.
all of them), many removal intervals are identified that are often
adjacent and could be simplified, which is what this patch does. i.e.
instead of emitting 3 rowsRemoved for 0-3, 4-6, 7-12, now a single
rowsRemoved is emitted for 0-12.
Change-Id: Ia503091cc4928378c88257cd8b431582e9ff454e
Reviewed-by: David Faure <david.faure@kdab.com>
They seem to be running just fine
Task-number: QTBUG-66849
Change-Id: Ia48d47c0fff173eb1d6eba38bdba752a91bd2b56
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QDir::isAbsolutePath(name) thinks any path starting with a slash is
absolute; however, to return a valid absolute path, we need to put a
drive prefix onto such a name. So use QFileSystemEntry::isAbsolute()
for that check (it believes in the need for a drive, or UNC prefix)
and handle the absolute-but-for-drive case when it arises.
Add a regression test and make related changes to existing tests.
Task-number: QTBUG-50839
Change-Id: Id5d2b2586bb1423fa2d9375a298a4bb5241cffe0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise random debug messages from Qt might mess up the expected vs
actual results.
The setting of QT_LOGGING_RULES in initTestcase has been removed, as
the selftest overrides that for each invocation of a subtests, via
the processEnvironment() function.
Task-number: QTQAINFRA-1631
Change-Id: I855d31274f8261f8b125df23409353f7101be0e4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_GADGET macro cannot be used in templates. It can however be useful
to derive a template class from a Q_GADGET enabled base class to benefit
from type safety features in C++ (e.g. the class could represent an id
or handle for some C++ type).
For proper wrapping of a QVariant with a gadget value in a QJSValue, the
QMetaType::IsGadget flag must be set for the registered template
instance type - which does not happen prior to the fix because
IsGadgetHelper requires qt_check_for_QGADGET_macro to be defined in the
registered class but not in an ancestor class - in other words: The
class must declare Q_GADGET.
To overcome this, IsGadgetHelper/IsPointerToGadgetHelper can now
differentiate between a Q_GADGET flagged class (allowing
automatic registration) and a derived class, e.g. a template class
(forcing Q_DECLARE_METATYPE to be used explicitly).
[ChangeLog][QtCore][QMetaObject] It is now possible to use template
class instances inheriting from a Q_GADGET in Qml
Task-number: QTBUG-66744
Change-Id: I7632ad45cff79fa422b3f852ca0b963f35fab155
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Instead of keeping a static list in a qrc file.
Change-Id: I7783db5cad5929cc3f449889e1cbcbb87f7f2637
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Various tests were adapted to Q_OS_WIN to take account of the
deficiencies in its TZ APIs; which are now bypassed when ICU is
configured, as we use it instead. Replace some #if-ery on a local
define with QT_CONFIG(icu) and QMAKE_USE_PRIVATE += icu here, to match
in corelib/tools/tools.pri
Task-number: QTBUG-66367
Change-Id: Ia93abdeb7d12046310f0bb4a78c2669f8eecbbc2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
That is correct C++. GCC (and apparently Clang) accept it after the name
for compatibility with the old __attribute__ syntax.
Change-Id: Ie7f3adaaed83198ca1c61bc0efdf51634e457b07
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If buddy is deleted then QLabel will still try to deliver the
shortcut event to it, in QLabel::event(), and cras.
Besides connecting to destroyed() which alone fixes the crash,
also hardened it and guarded against dereferencing null buddy,
in the unlikely event of someone adding features to QLabel.
The second part is suitable for backporting to the LTS branches.
Task-Id: QTBUG-66841
Change-Id: Ib6a36a9f99cee31afe1f88eb77f5b6cafb8b1086
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Whitelist tests that pass locally and that have been
blacklisted since the BLACKLIST was introduced in
2015 (in commit a8dda3b8).
Change-Id: I777b490313ebaa6c8c8daee168487d350179a5e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test has been flaky on top of QEMU. The test is clearly a sort of manually
rolled benchmark, not a regular autotest. Remove the test and replace it with a
benchmark in QObjectBenchmark.
Task-number: QTBUG-66823
Task-number: QTBUG-66216
Change-Id: I7a48293023f32141eed6fea50fbb63af18933a8f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When QStandardItem::insertRows/Columns is called with an empty list
or an insert count of 0, do not assert but return false.
Task-number: QTBUG-66491
Change-Id: I328598e08584fb9b0a35075458bfeb31c57ebfee
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Since Qt 5.4 the QTabBar can be automatically hidden when it has less
then 2 tabs. Therefore the sizeHint should not consider the tabbars
size when the tabbar is hidden.
Task-number: QTBUG-64715
Change-Id: I2f248f88d9070de5354f7344c7628a78442ab499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Postgresql needs a special value for nan and +/- inf. This was
considered during insert but not during select.
Also remove some pre-c++11 inf/nan - handling and replace it with
Qt equivalents.
Change-Id: I044ca58e9cf673f4b100b05a0d8e25c8a9c29ec5
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The printVolumes function already adds line endings.
Change-Id: Id2553f881ccc0ab3c8b8fc77d3096dd5d968abda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of the current working directory, which doesn't necessarily match
the location of the settings file.
Change-Id: Idffe2e87190cc9b6027fbba3b84e9dbf72ccf2f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code that updates a section size must also update length,
otherwise saveState can end up saving inconsistent state, and
restoreState() goes to an early-return, not doing anything.
The actual bug was fixed meanwhile because _q_sectionsChanged is called
again, which recalculates length. I still see this only as a safety
measure, every other code path that changes section sizes updates length
right away.
Change-Id: I6cc16261692d93b3640afafef600a5bdff8dca0c
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
all of these iterator classes already have a member operator+, which allows iter+int.
This commits addes non-member operator+, which allows int+iter, and forwards to the member
QList and QArrayData iterators now satisfy RandomAccessIterator concept
Change-Id: I25c1dd8cea299e735d5a5e288dbe23dc1d7a1933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before running tests that depend on QWindow::requestActivate
Gets rid of several Wayland platform checks in tst_QWindow.
Change-Id: I7a5e029044a968dfcf87ecbb5105c01d52852d35
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
And make it easier to fix if platformName == wayland-egl etc.
Change-Id: Ia2d62ba003796e08f3e8a5bbfd0c3fd9d185e4e0
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
By using qWaitForWindowExposed instead of qWaitForWindowActivated.
Task-number: QTBUG-66824
Change-Id: Idf604157070731d9c92ccf64d8349c8571960b7c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The test actually passes, so there's no need to skip it.
Task-number: QTBUG-66824
Change-Id: Id091776ff7ca7637fdcf0e0ced833982b5788d92
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Has been flaky in CI.
Task-number: QTBUG-66815
Task-number: QTBUG-66216
Change-Id: I2c3eb42507eae618486aa402474b4b3f85ff310e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This follows on from a232251992 which
covered a similar instance of this. As with that change, we should not
abort the compilation, just ignore it.
Task-number: QTBUG-63772
Change-Id: Ide958080a90f43ed19edd8a320e7d45de1c96821
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When first starting an Android app we have invocation order issue, to
load the platform plugin we create the default QLocale (needed by the
resource locator code to see if :/qt/etc/qt.conf exists) so when the
android platform plugin loads and creates its own QSystemLocale, the
QLocale defaultLocalePrivate is already created and pointing to
globalLocaleData which means that systemData won't be called and thus
the code that triggers the call to QLocalePrivate::updateSystemPrivate
won't be called when calling QLocale().
I thought of two ways of fixing this, one was calling
QLocalePrivate::updateSystemPrivatea() from the QAndroidSystemLocale
constructor, but giving the responsibility to not break things to the
plugin seems a little fragile, so making the check on QLocale()
seems better.
Without this patch an Android app doing
QApplication app(argc, argv);
qDebug() << QLocale().name();
qDebug() << QLocale().name();
qDebug() << QLocale::system().name();
qDebug() << QLocale().name();
would print
""
""
"ca_ES"
"ca_ES"
now it correctly prints "ca_ES" the four times.
Task-number: QTBUG-41385
Change-Id: I2cf419f59aa008fa3aca11295fe7d42c40bcc32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Silence debug output by setting QT_LOGGING_RULES
to turn off all debug output.
Task-number: QTQAINFRA-1631
Change-Id: I5c2366b4fe4bac341dcfd92f68b6da8071c5b089
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Evaluating testlib's XML output in COIN would fail with:
"XML syntax error on line 7520: invalid UTF-8"
for the toLatin1() tests due to some Latin1/UTF8 mixup.
Add a helper function to convert the data to plain ASCII.
Task-number: QTQAINFRA-1797
Change-Id: I1c64878d4c2a67b8c2689905b5ffe6707b5963c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test has been crashing flakily recently.
1) It is creating a QGLWidget
2) It is stealing the QGLContext of that widget and moves it into a separate
thread.
3) In that secondary thread it makes the context current.
4) Meanwhile the QGLWidget itself may receive for example a resizeEvent or
other events and - since it assumes that it owns the context - attempts to
make it current.
5) Attempting to call makeCurrent() on a QGLContext that is in a different
thread than the current thread (via QObject thread affinity) will result
in a call to qFatal() and consequently the test aborts.
The conclusion from Simon Hausmann is that this test is testing a pattern from
Qt4 times that may or may not have worked back then. Nowadays with the Qt5
QOpenGL* API we do support this properly and there appears little sense testing
this.
Therefore remove the test altogether.
Task-number: QTBUG-66411
Task-number: QTBUG-66216
Change-Id: Ie2d66705bc7c3914ace6abcba9557c7c67ad4db3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This test executable was not flaky in the normal sense that when run, it
sometimes passes and sometimes fails. Instead, in some builds it would fail
consistently and in some builds it would pass consistently.
The first test to fail was version(ok00, default to last version) which gives
"mylib" as the library name and -1 as the library version. The description
implies that QLibrary selects the biggest or last used version when given -1.
However, versions less than 0 are not used at all. Instead the loading uses only
the name to select the library. Change the description to match.
So why did the test sometimes pass, sometimes fail? The test uses two library
projects lib and lib2 which install two different major versions of libmylib.
That includes the symbolic links:
libmylib.so -> libmylib.so.1.0.0*
libmylib.so.1 -> libmylib.so.1.0.0*
libmylib.so.1.0 -> libmylib.so.1.0.0*
libmylib.so.1.0.0*
libmylib.so -> libmylib.so.2.0.0*
libmylib.so.2 -> libmylib.so.2.0.0*
libmylib.so.2.0 -> libmylib.so.2.0.0*
libmylib.so.2.0.0*
The key thing being that both set the libmylib.so symbolic link. In a
multithreaded installation it's undefined which happens to set the link last.
The test code expected libmylib.so to point to libmylib.so.2.0.0. Ensure that by
building and installing lib2 after lib.
Task-number: QTBUG-66722
Task-number: QTBUG-66216
Change-Id: Ic513c772902273049c28e43fc1d83d550aafcd23
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QJsonValue] fromVariant() conversion now converts
from QUrl and QUuid using special encoding forms to ensure best JSON
compatibility.
Change-Id: I56b444f9d6274221a3b7fffd150cdc5ca1f87ff1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For compatibility with other parsers that may expect it to be so.
Change-Id: I56b444f9d6274221a3b7fffd150cd66390f98fd5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
After a37785ec76 went in, it become
apparent that multi mouse button state handling in qtestlib is
non-existent, for details see QTBUG-64030 and QTBUG-63786. What
happened behind the scenes often was not what one would expect based
on the provided QTest::mouse* input sequence - events went missing,
incorrect events were generated, each subsequent test function
started with a state set from the function that run earlier. It is
easy to see how a minor change in one test could easily affect outcome
of other tests.
With a37785ec76, Qt platform plugins
are now responsible for sending explicit mouse button type and state
information; qtestlib should take full responsibility now as well.
But using the new API from a37785ec7 alone in qtestlib is not sufficient.
We need to reset mouse state between each new test function run (we do
this at function scope as that fits with the current qtestlib API user
expectations). This patch implements the necessary reseting logic.
Updated tst_qwindow.cpp::generatedMouseMove() to use QTest::mouse* APIs.
That test requires pressing multiple buttons, it was not possible with
QTest::mouse* APIs before this patch.
Added an auto test for multiple mouse button pressing/release in
tests/auto/testlib/selftests/mouse/. And few other tests which are
currently QSKIP-ed, but should be considered when re-designing qtestlib
APIs.
Task-number: QTBUG-64030
Change-Id: I39fdcbc73a467a7463ce2aed622bf22484095635
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Factor out a function to calculate the size and update the size when a
style sheet parent is set.
Task-number: QTBUG-64550
Change-Id: I3afe997085eae3cd48b7fe0a4c98582a8f572260
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Return value of qWaitForWindowActive should be checked as it is marked
Q_REQUIRED_RESULT.
One of the calls was failing, so remove it and wait for the next condition
instead.
Amends d0dffdfc01.
Change-Id: I0c0b2bf11504730477158a5e1fb3018f359a6fb9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The stdout of the processes used in the test was dumped if there was an error,
but the processes write their error messages to stderr.
Use MergedChannels process channel mode to dump both output streams.
Change-Id: I1645fd31c394da0871ee6ae36d37ca9a04d86052
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before there was a risk looking up e.g index -1 if there
were no visible sections in layoutAboutToChange.
Change-Id: Ic911e4292e8e8c4892fef1c0f34cf7dccaad2bac
Task-number: QTBUG-65478
Reviewed-by: David Faure <david.faure@kdab.com>
The refactoring to support multiple providers broke alias resolving
(e.g. "text/directory" would be an invalid mimetype, instead of being
resolved to "text/vcard"). The unittest didn't catch it because most of
it was running with a single mime directory (and therefore a single provider,
in the new model). Fixed by re-running a number of test methods once we
have a second mime directory.
Change-Id: Ib5da89ba79c11ed41813b2aff4bc71c30afcde7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The UBA in Qt was out of date, implementing the spec from pre
Unicode 6.3 days. It missed handling of directional isolates and
paired brackets.
This adds a completely new implementation of the UBA, that is
compliant with Unicode 10.
Added the test data from Unicode 10 to the qcomplextext auto
test and ensure that we pass the test suite.
Task-number: QTBUG-57743
Change-Id: Ie2d957bc9775d82f0a51d1c78dc6bd154f22847c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Has been flaky in CI.
Task-number: QTBUG-66708
Task-number: QTBUG-66216
Change-Id: I69878574a98139681100c1424d5bbf46cc4a87b8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
The test's client processes are prepared for the server not being ready when
they try to connect and handle QLocalSocket::ServerNotFoundError by waiting and
trying again.
However, on Ubuntu 16.04 and 17.10 and possibly other systems, sometimes the
error returned by qt_safe_connect inside QLocalSocket is ECONNREFUSED instead of
ENOENT. This has caused flaky failures in CI, so wait and try again in the case
of QLocalSocket::ConnectionRefusedError also.
Task-number: QTBUG-66679
Task-number: QTBUG-66216
Change-Id: I61e3d5b052d84c5ba9d1746f2c71db37cedbf925
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Has been failing a lot lately
Task-number: QTBUG-66247
Change-Id: Id940a573eb299379cacceb836890cbe0b3c896b7
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If _Thread_local is used on a block-scope declaration, it must be
combined with either static or extern to decide linkage.
Change-Id: I228b3520767197c6cdf5134ff5a666ab2aca33ea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They can be, if compiled with -Wl,-pie. Example:
$ file /usr/bin/ping
/usr/bin/ping: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0
And you can't detect via the interpreter, since libraries can have
them too:
$ file /lib64/libc-2.26.so libQt5Core.so.5.11.0
/lib64/libc-2.26.so: ELF 64-bit LSB shared object, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2
libQt5Core.so.5.11.0: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.17.0
Change-Id: I940917d6763842499b18fffd15143bb80ce0e531
Reviewed-by: David Faure <david.faure@kdab.com>
Do not clear the settings of QHeaderView during layoutChange when the
model is empty and the section count did not change. This will not work
when a section is moved or a section is replaced with a new one during
layoutChange. But since layoutChanged is also called on sorting, this
patch ensures that the settings are not cleared in this case.
This restores the behavior to the same as before 5.9.4.
Task-number: QTBUG-66444
Task-number: QTBUG-65478
Change-Id: I39989cfd45b42e58f49d18ec014d3a941cadb6c9
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
During (re)storing the sections within layoutChanged handling, the
hidden section size was not properly stored which lead to a section
size of 0 when the section was unhided afterwards.
Task-number: QTBUG-66413
Task-number: QTBUG-65478
Change-Id: I0b714c7e0530a1eae82b3bb0e0dc80ed576522d0
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Currently there is a bug in Qt regarding the PostgreSQL driver as it
does not correctly escape the table names when constructing queries
internally. Therefore, these tests are marked as expected failures until
the bug itself is fixed in Qt.
Change-Id: I74dadc187f8a08509128dfea27be99787e57ea51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This also accounts for some quirks on the PostgreSQL side:
- Null values for a related table are placed in a different
order when sorted.
- Functions (sum, count) return a different type than other databases
- Using quotes to account for case sensitivity with tables
Task-number: QTBUG-63861
Change-Id: Ib1894fa8d0c77d7045941f7c57be0d0acd8d117e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
TouchEvent::TouchPoint::pos was not updated in
QGraphicsScenePrivate::updateTouchPointsForItem().
To prevent the transformation being calculated repeatedly for each touch
point member, extract a function genericMapFromSceneTransform()
from genericMapFromScene() returning the transformation and use
that whereever multiple points are transformed.
Add a test, extracting helper functionality from
tst_QGraphicsItem::touchEventPropagation().
In addition, fold tst_QGraphicsScene::checkTouchPointsEllipseDiameters() from
c48f4bde00 into this test, so that
it is testing all transformations.
Task-number: QTBUG-66192
Change-Id: If71886d2c14c4e216f7781ea2f22f1adc444e6cf
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- Move ivars into @implementation
- Use instancetype where applicable
- Use dot notation for property access
- Use subscript operator for dictionaries and arrays
- Format selectors consistently
- Use proper style for init methods
- Use generics instead of void pointers where possible
- Use "range for" loops instead of indexing
- Replace or replace IBAction/IBOutlet with void
Change-Id: I1667812a51d4dfe44ae80fe337cb1f4bc9699d92
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Duplex doesn't really make sense in the context of printing to pdf,
and the variable was only being used in QCupsPrintEnginePrivate anyway
Change-Id: I801634c56759572825b5c9549d7a1dc92e5697a0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Since the PlatformInputContext is shared between test cases, the set commit
string from inputMethod() was otherwise saved and could pollute other tests.
For example on Windows PlatformInputContext::commit() was called when the
QLineEdit was first clicked onto in tst_QLineEdit::testQuickSelectionWithMouse()
and inserted "text" in the middle of the text, rather than starting selection as
intended.
This led to tst_QLineEdit::testQuickSelectionWithMouse() failing on Windows at
first in CI, but then always passing the repeats when it was tested alone.
Task-number: QTBUG-66499
Task-number: QTBUG-66216
Change-Id: Id6bdd263d57fd6d08fb48f013542b55b132907ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
[ChangeLog][QtCore][QByteArray] Added QByteArray::isUpper() and
QByteArray::isLower() to check if a byte array contains only uppercase
or only lowercase Latin1 letters.
Change-Id: I7ab3c775bc714138d4be259ac6fa2cfc70467ed4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add formatting for registered enumerations based on QMetaEnum
and unregistered enumerations as hex values.
[ChangeLog][QtTest] QtTest now prints values of QFlags that failed to
compare with QCOMPARE.
Task-number: QTBUG-65845
Change-Id: I3eae6d20d3c0d72441ca6c4037d9a8dafa4b6357
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Fix 'Too many segments for object format' errors for (Debug) builds
using Windows ICC.
Change-Id: Ie48f43199948477c426d0a4e557f039eda129b22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix 'unresolved external symbol __imp_Reg*' errors for builds
using Windows ICC.
Change-Id: I99cb6d53c45cadb31b5675182753f168a7bf4ea3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Switch to QTRY_COMPARE since thread-local references might be held shortly
after finished is signalled.
Change-Id: Ia32f1f45f6cc461352558e0f2acf9612f8a4639e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the focus is lost on an editor due to the application no longer
being the active one then we have to ensure the parent view is going to
get the focus when it is returned. Since the editor does not have focus
when this check is done we need to manually account for this case by
setting it on the parent view as if it would if the editor did have
focus.
Task-number: QTBUG-62253
Change-Id: I14ac347e9e3a2bfaa8715a45811b17c1c7cf15f8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The "crashes" subtest has several "expected" reference files. The matching
one was previously determined by checking the line count of the output.
This however does not work when there are several reference files with
identical line count as is now the case with boot2qt.
Refactor the comparison code from the QTest/preliminary void return to
the bool f(QString* errorMessage) convention so that all files can be tried.
While doing so, streamline the code and remove numerous unneeded
allocations of strings and regular expressions per compared line.
Task-number: QTBUG-65845
Change-Id: I722159d1753f2a36f0e497e315ffd81cb58cac0b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Has been failing on it, but not on any other platform.
Task-number: QTBUG-66396
Task-number: QTBUG-66216
Change-Id: I0b208c675a23fb4bc1808dd3aa4dfef9bddf136b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Previous version of Ubuntu used to be blacklisted and the test is still flaky on
Ubuntu 16.04.
Task-number: QTBUG-66390
Task-number: QTBUG-66216
Change-Id: Iec404879f61164b995f0df7348f4f4baf608ca90
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test sometimes ended up with:
QThread: Destroyed while thread is still running
Received a fatal error.
This was because as a member variable of the local struct the QThread object was
sometimes destructed before the signal connection quitting it was handled. Fix
that by making sure that the thread is finished before finishing the test.
Also moved connecting to the state machine's signal to be before starting the
machine. Because the counting of QStateMachine::finished signal could hit 1
after the first signal is emitted and the test could pass without the code
working, check that both of the signals have been emitted.
Task-number: QTBUG-66372
Task-number: QTBUG-66216
Change-Id: If14141e39f37541032ddd8c6471daf40a77b0469
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a main window, based on the observation that the original bug
report was about a typical main window.
The mainwindow typically has the mouse grabbed when clicking to open
a menu and all mouse events go to it. Mimick that in the test
by sending the mouse events to it.
Remove the code using QCursor::setPos().
Task-number: QTBUG-63031
Change-Id: I9117c9633f81aba8bdff235ce64884c489fdc9f7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Windows sends a mouse move with no buttons pressed to signal "Enter"
when a window is shown over the cursor. Discard the event and only
use it for generating QEvent::Enter as not to confuse tests.
This is preparing for the use of the new QPA API for mouse events.
Change-Id: I3eb7f3dad82d27d0b425c7eaf34b1eee11592074
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Without this fix, a fresh clean build of 5.9 will fail.
Change-Id: I69e4da382b07cc6e5e280e99478cbc3d44aa3f27
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It is flaky on Ubuntu 16.04 and openSUSE 42.3.
Task-number: QTBUG-66345
Task-number: QTBUG-66216
Change-Id: I06fb88ee65113136309a0faa0336dd11672bfe59
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtWidgets][QLineEdit] The textEdited() signal is now emitted even if the
QValidator has changed the user input.
Task-number: QTBUG-44046
Change-Id: Ife287269c7dcbb644cb03a291bf96f7db384ed56
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remove BLACKLIST files which are no longer valid because the mentioned
CI systems are no longer active:
- opensuse-13.1
- opensuse-42.1
- rhel-7.1
- rhel-7.2
- rhel-7.3
- ubuntu-14.04
or the testcases are no longer available:
- QTBUG_14292_filesystem in qactiongroup
Change-Id: I80a4397059fafba169096440fdc07d45c76a1ed8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The possible key sequences for QKeySequence::Copy on X11 is Ctrl+C, then
Ctrl+Insert and at last F16. The order is defined in
QPlatformThemePrivate::keyBindings.
Task-number: QTBUG-46053
Change-Id: I86a0767e268088edfce98cfb07f9fb78f00d0713
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
If more than one VM tries to run the test at the same time, it times out. These
sharing violations were attempted to be worked around in 1c3dc8cfb, but the
workaround just leads to timeout, not success.
Task-number: QTQAINFRA-1727
Task-number: QTBUG-66216
Change-Id: If8bfd60dbb6575843680971d45b1c82e5beff534
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
[ChangeLog][QtCore][QString] Added the functions QString::isUpper
and QString::isLower to check if a string contains only uppercase
or only lowercase letters.
Change-Id: I12d3a47d4605eb4514842071e80a9ba0723d4e01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has been observed that sometimes the output is not captured by QEMU.
Task-number: QTBUG-65845
Change-Id: Iddf888fb3aa019209dbe71f424d87884471784e0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This was the missing counter-part to indexOf(QWidget *), which is
sometimes implemented in user code.
Not sure why the original code doesn't use a for-loop and instead accesses
an out-of-bounds element, but I'll preserve the behavior of very old working code.
Change-Id: I7d7fa56b56a4626789774c15c23fdfef41d723e7
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Likely fail is 3d29a0dd74. Is preventing
merge from dev, so blacklisted for now.
Task-number: QTBUG-66324
Change-Id: Ieb522897e93d4a1b4c0e423fadd4138dfb089093
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qvarlengtharray.qdoc
src/corelib/tools/qvector.qdoc
Resolved documentation changes in favor of 017569f702,
which keeps the move overloads along with its const-ref sibling.
Change-Id: I0835b0b3211a418e5e50defc4cf315f0964fab79
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QTreeWidgetItem setData() function
Change-Id: Ife87e9e046621b464ad340bd9eb451355730e93c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test was blacklisted in 5.10 on opensuse, but it fails a lot on
ubuntu as well. While we are discussing a real fix for this, temporarily get this out of
the way.
Task-number: QTBUG-63152
Change-Id: I4f1d3b261013052636ee13eda30f94b647a43a38
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The peer Tests for QDBusAbstractAdaptor are so flaky that it's
very difficult to get any commits through to qtbase.
Task-number: QTBUG-66216
Change-Id: I8da80f71aa832e683f72129cb2d4785425d39c00
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When calling setSceneRect() on a QTouchPoint it will cause the
ellipseDiameters to be changed, whereas this should not be affected by
the scene rectangle as it should be in logical pixels.
Also add a manual test for visually checking the ellipse diameters on
various devices.
Change-Id: I1ee9207cb1a63cfef33fe904594c73aba221af5c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Timeouts with subsequent failures to delete the temporary
directories have been observed in COIN.
Previously, QProcess:terminate() was used to end the processes,
which does not have any effect on console processes on Windows.
Add a helper function which resorts to kill() on failure
to terminate().
Change-Id: I05539d1703280d34b392f2e8ff8565b9a04d703c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to save having to always run a query to get the tablename for
a known oid then we cache the result on the driver side. The oid stays
the same while the table exists, so only on dropping it would it change.
Recreating the table causes it to get a new oid, so there is no risk of
the old one being associated with the wrong table when this happens, if
the driver is still open at that point.
The benchmark added shows the improvement from the previous code, before
the results for PostgreSQL was:
RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
259 msecs per iteration (total: 259, iterations: 1)
whereas now it is:
RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
0.000014 msecs per iteration (total: 59, iterations: 4194304)
Task-number: QTBUG-65226
Change-Id: Ic290cff719102743da84e2044cd23e540f20c96c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use the clean implementation that does not use QCursor::setPos()
with the exception of macOS, where this causes
submenuTearOffDontClose() to fail.
Change-Id: I95a615c37bcf419ce1ede65b5ed79a5ec0568391
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
... and use it.
[ChangeLog][QtGui][QBitmap] Add overloaded QBitmap::fromImage that takes QImage rvalue
Change-Id: Idb6e6bb1645371996700349714041cc54bb3d005
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QFontEngine::cloneWithSize() is used by QRawFont internally when switching
a raw-font from one size to another using setPixelSize. For CoreText, we
use a subclass of QCoreTextFontEngine to keep track of the QByteArray data
of a raw-font, but failed to overload cloneWithSize, so we would lose the
data whenever setPixelSize was called, resulting in missing text rendering
in QtWebKit. We now retain the data as we should.
Task-number: QTBUG-65923
Change-Id: I7d4186a3c32a61d48d1e9388e43f2792e8e46081
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This way, it's lossless.
This commit is a cherry-pick of ab1e507574,
which was reverted.
[ChangeLog][QtCore][QVariant] Conversions of QDateTime to strings now
contain the millisecond components.
Change-Id: I5e421e32396d44e4b39efffd150b744e40fff3a1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Commit 8f52ad9fe0 ("ucstricmp: compare
null and empty strings equal") made sure empties and nulls would compare
equally, but may have broken the null vs non-empty comparison (which was
not tested). The commit message also said that it expected all callers
to handle null before calling into those functions, but that's not the
case for QStringView created from a null QString: the incoming "a"
pointer was null.
So just remove the checks for null pointers and rely on the size checks
doing the right thing.
[ChangeLog][QtCore][QString] Fixed a regression from 5.9 that caused
comparing default-constructed QStrings to be sorted after non-empty
strings.
Task-number: QTBUG-65939
Change-Id: I56b444f9d6274221a3b7fffd150c83ad46c599b6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
While we're at it, add a way to get it without the dashes too. I'm
calling it "id128", as in "128-bit ID", as seen in journald's sd_id128_t
type and the sd_id128_xxx() API.
[ChangeLog][QtCore][QUuid] Added a parameter to both toString() and
toByteArray() to allow controlling the use or not of the braces and
dashes in the string form.
Change-Id: I56b444f9d6274221a3b7fffd150cde706cfc5098
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is a standard feature in GtkEntry widgets or HTML
<input type="text"> elements. During a normal text selection by mouse
(LeftButton press + mouse move event), it's now possible to quickly
select all the text from the start of the selection to the end
of the line edit by moving the mouse cursor down.
By moving it up instead, all the text up to the start of the line edit
gets selected. If the layout direction is right-to-left, the semantic of
the mouse movement is inverted.
This feature is only enabled if the y() of the mouse move event is
bigger than a fixed threshold, to avoid unexpected selections in the
normal case. This threshold is set by the QPlatformTheme and a value
smaller than zero disables this feature.
The threshold is updated whenever the style or the screen changes.
[ChangeLog][QtWidgets][QLineEdit] Implemented quick text selection by
mouse in QLineEdit.
Change-Id: I4de33c2d11c033ec295de2b2ea81adf786324f4b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This reverts commit ab1e507574. That was
supposed to be a minor behavior change, but ends up having visible
effects such as QtXmlPatterns xs:dateTime type now reporting sub-second
fractions. So we're reverting in 5.10 and re-applying in 5.11.
Change-Id: I741e49459c9a688c1c329d6cbd521cd4a0b2aa84
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Actually check that there's a T where ISO 8601 wants it (instead of
just skipping over whatever's there), with something after it; move
some declarations later; add some comments; and use the QStringRef API
more cleanly (so that it's easier to see what's going on). Simplify a
loop condition to avoid the need for a post-loop fix-up.
This incidentally prevents an assertion failure (which brought the
mess to my attention) parsing a short string as an ISO date-time; if
there's a T with nothing after it, we won't try to read at index -1 in
the following text. (The actual fail seen had a Z where the T should
have been, with nothing after it.)
Add tests for invalid ISOdate cases that triggered the assertion.
Task-number: QTBUG-66076
Change-Id: Ided9adf62a56d98f144bdf91b40f918e22bd82cd
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit a9c111ed8c)
- Allocate widgets on stack. The previous version was inconsistent (some
widets were managed by QScopedPointer and some were simply leaking).
- Use QTest::mouseMove(QWindow *)
- "This test fails on OS X on CI" was a clear indication that test is
flaky, the new implementation can reliably reproduce issue which is
now tracked in QTBUG-63031.
Task-number: QTBUG-63031
Change-Id: I59965ef8fa8edca17c8a73901d81e9efc7da3c5b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QHeaderView is doing a complete rebuild of the sections when the layout
changed because everything could have happened. But since layoutChanged
is also called during e.g. sorting, the old data must be restored when
possible.
Task-number: QTBUG-65478
Change-Id: I088d4d843cad362b97df6dc5e0dcb9819b13547f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is in preparation to adding CBOR support. We don't need yet another
dir for CBOR and placing it in src/corelib/json is just wrong.
Change-Id: I9741f017961b410c910dfffd14ffb9d870340fa6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QListWidgetItem/QStandardItem
setData() functions
Task-number: QTBUG-55903
Task-number: QTBUG-63766
Change-Id: I4da9346ef8401cc8633dc4b2ea7d00451d1e3942
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Wait a little bit longer for the visibility and resize events. By
directly waiting for the incoming events with QTRY_COMPARE we give
the test some more time to deliver the expected events.
Also move the check for the expectedResizeCount/expectedPaintCount
before the geometry check for better debugging.
Task-number: QTBUG-64639
Change-Id: I712e432aa8f8d35dd199adf88af3653009528b57
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
File system operations like renaming/removing may fail on Windows when
file system watchers are present. Add functions to
QFileSystemModelPrivate to temporarily remove the watchers prior to such
operations and to restore them in case of failure. Use them for
rename/remove (within a feature check for QFileSystemWatcher
and Q_OS_WIN).
Task-number: QTBUG-65683
Change-Id: I90142901892fbf9b1e1206a3397a95ffd3c8f010
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
With this change it is possible to use all supported
configurations in different backends without any new interfaces.
Change-Id: Ib233539a970681d30ae3907258730e491f8d3531
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Instead of having to modify the tst_databases.h file whenever you want
to add a test database, this will now read from a file to find what
databases are available. This defaults to dbs.json in the same directory
or the QT_TEST_DATABASES_FILE environment variable can be set to point
to the file that contains the databases. The latter makes it easier for
CI then to have something set up on a per configuration basis.
The SQLite database stays hardcoded so this will continue to be tested as
before without any additional changes.
Change-Id: I7e7ccde6a6be3e490dd640b1590e3b691a6b2ab3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The include is needed for std::unique_ptr on winrt.
Change-Id: I72a28bd0951cc947ac65877ccc35f464c757c444
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The backwards iteration was done under the assumption that the only
valid modification of the winEventNotifierList in a slot connected to
activated() would be the removal of the notifier itself. This is wrong.
Instead, iterate forwards, like before 85403d0a, and check the index
against the current list size in every iteration. This ensures that we
do not run out of bounds while the list is modified.
Also, retry the activation loop if the list was modified by a slot
connected to activated(). This ensures that all notifiers with signaled
handles are activated.
Task-number: QTBUG-65940
Change-Id: I25f305463b9234f391abc51fe0628d02f49b6931
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This way, it's lossless.
Change-Id: I5e421e32396d44e4b39efffd150b744e40fff3a1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The idx member of EventWithNotifier is unused.
Change-Id: I0f5aacaaad4b4e82c57ff7bb020586944014f139
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Adds inline handling of the C++17 type std::variant, so the type will
be resolved if converted into a QVariant.
Change-Id: I31809d70d7f347277389d42a3695836ec7a32d02
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 29bc68cf16 added support for
unsigned and commit 5ff7a3d96e later added
support for int. This commit adds support for qsizetype, which isn't int
on 64-bit platforms.
We do this by reorganizing the code and using the generic version of
__builtin_{add,sub,mul}_overflow from GCC 5 and Clang 3.8, which ICC 18
seems to support now too on Linux. That leaves older versions of GCC and
Clang, as well as MSVC, ICC on Windows, and the GHS compiler, to use the
generic implementations, as I've removed the assembly code those
versions of GCC and Clang on x86 are now uncommon.
Note: any older version of ICC probably breaks. We only support the
latest.
Change-Id: I9e2892cb6c374e93bcb7fffd14fc11bcd5f067a7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Use qInfo() instead of qDebug() in case QDebug is turned off.
If the 'diff' tool is available, write the output to temporary files and
run diff on it. Otherwise, print the lines as was before, but onto one
stream to avoid indentation by the testlib handler.
Change-Id: Ib5a5dfb66ce481b493b85b915aa8c785ecb6b387
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While menubar actions are hidden, as menubar was too narrow
to contain them, by clicking the blank area, where the action
was supposed to place, can still trigger the action.
Task-number: QTBUG-65488
Change-Id: I6b137e0717f634ebd3371dbcc2c1ce2089688374
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Setting speed to 0 means the current frame will continue to be shown,
the finished signal is not emitted, and state remains QMovie::Running.
Task-number: QTBUG-65758
Change-Id: I681d902e3211c5899b21043e5177b7c73d5d3fb5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Passing -1 to waitForReadyRead() may cause it to wait for some time
but the data retrieved may be enough for processing. So if 0 is passed
from read, indicating that there is potentially more to come, then
it will do a waitForReadyRead() then for more data to come.
Change-Id: I75f270d1f124ecc12b18512cc20fb11f7a88f02e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By ensuring that the current index follows the focus of an index widget,
we can ensure that moving the cursor will happen in the way that is
expected from the focused widget.
Task-number: QTBUG-27793
Change-Id: Ia36891a94ce41c7d12fba678de23a6f3b69374ae
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The action which added by QMenuBar::addAction(const QString &text) already
connected relevant signals and slots implicitly, however, while
QMenuBarPrivate::updateGeometry -ing, it reconnects them
if there's a extension button associated with a hidden popup menu.
In that case the QMenuBar::triggered would be fired twice.
Since the QAction's ownership may be changed or added dynamically,
there are still very rare cases like several widgets share the same
QAction object to result in this problem.
[ChangeLog][QtWidgets][QMenu] Fixed a bug in QMenu that caused QMenuBar::triggered
to be fired multiple times.
Task-number: QTBUG-25669
Change-Id: I4d52e82a2136a992e0b37118e41237d96a2c5d22
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The size of the QStaticText was always adjusted, even if setTextWidth()
was used. Now size of the QStaticText is calculated according to
the set width of the text, and if no width was set, then the
automatically adjusted size is used.
[ChangeLog][QtGui][QStaticText] Fixed explicitly set width not being
respected.
Task-number: QTBUG-65836
Change-Id: If2f9f6952fb168f4bcb6d8fabfdc7360f8a36485
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Improves performance and STL compatibility by adding rvalue versions
of prepend and insert.
[ChangeLog][QtCore][QVarLengthArray] Added rvalue overloads of
prepend and insert.
[ChangeLog][QtCore][QVector] Added rvalue overloads of prepend
and insert.
[ChangeLog][QtCore][QVarLengthArray] Can now contain movable but
non-copyable types, such as std::unique_ptr.
Change-Id: I6c946acc5b67502c91c52ac5dea67cedb1af93a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a regression test for bugs resulting from failure to take
account of the MS TZ APIs fake-DST handling of standard-time
transitions happening during DST. Has to skip the 2014 test on Win7,
as it's so old it doesn't know about the (for it) "future" transition.
Task-number: QTBUG-42021
Change-Id: I853b86d03a86f0269371bf1622bf63882fb8ee5d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QItemDelegate::doLayout added a margin after the checkbox which is not
done within QCommonStylePrivate::viewItemLayout. This created a small
but visual difference between using QItemDelegate or QStyledItemDelegate.
The additional margin was removed from viewItemLayout somehwere between
4.4 and 4.5 so it was intentional.
Change-Id: I2fc3f287fe8b181355edeebec9626c49d85fe74d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
For Q_OS_WIN, a path is only truly absolute if it includes a drive
letter; merely starting with a slash is not enough. (We can't support
UNC paths, so don't even try: qmake runs various commands in the
source directory using CMD.exe, which doesn't support UNC as PWD.)
This requires, when resolving a path relative to a root, transcribing
the root's drive to such not-quite-absolute paths.
Changed QMakeGlobals, $$absolute_path() and $$relative_path() to now
use IoUtils::resolvePath() rather than delegating to QDir's absolute
path method, since that doesn't correctly recognize the need for a
drive letter (and qmake did run into problems with some paths, from
splitPathList and a failing test, as a result).
Moved existing ioUtils tests for handling of relative / absolute paths
out into separate functions and expanded significantly. Fixed some
existing tests to use an absolute path where one is needed; added two
tests involving driveless (but rooted) paths; and fixed the test init
to set a value for QT_HOST_DATA/src property (the lack of which lead
to an assertion failure with this fix).
Task-number: QTBUG-50839
Change-Id: I2bfc13c1bfbe1ae09997274622ea55cb3de31b43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Use Ids from newly introduced id attribute depending
on the global form setting.
Change-Id: I0a5094d5543c0714c88511fa159b60afc9be3c81
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When QFile::open is called with the NewOnly flag, the call will
fail if the file already exists. As usual, if the file does not exist,
it will be created. Like QTemporaryFile, there is a guarantee from
the operating system that you are not accidentally creating a new file
on top of an older file. When QFile::open is called with the
ExistingOnly flag, the call will fail if the file does not exist. The
ExistingOnly flag only provides new functionality when used with the
WriteOnly flag. For ReadOnly it provides no change in functionality,
as ReadOnly by itself already never creates.
Task-number: QTBUG-52244
Change-Id: I8e3206728f245f95172c225bf297023fb078fc6d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Generate it only when the form contains some actions.
Change-Id: Ic1d64003ccff6102174771c04999cf7c90ac2ae8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Generate it only when needed.
Change-Id: I7a89b18ec0f2ee7d55fcad1b3f9701269d7616ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
... that will be used if an icon can't be found in the
current theme.
The Icon Theme Specification
https://standards.freedesktop.org/icon-theme-spec/latest/ar01s05.html
states that unthemed icons must be searched in the base directories,
i.e. /usr/share/icons, ... But in practice unthemed icons are
installed into /usr/share/pixmaps and this dir is not used as
a base dir for icon themes. So it's better to explicitly specify
fallback dirs to avoid needless access to the filesystem.
Also some KDE application install their own unthemed icons
(into /usr/share/<appname>/pics), that can't be found by
QIconLoader. With this change it would be possible for them
to specify dirs with unthemed icons and thus be displayed
correctly in non-KDE environments.
[ChangeLog][QtGui][QIcon] Added fallbackSearchPaths() that
will be used to find icons missing in the current icon theme.
Change-Id: I0dc55ba958b29356a3b0a2123d6b8faa24d4c91e
Task-number: QTBUG-33123
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Data in item models is most often organized in rows, where each column
contains an attribute of the item represented by the row. Often when
sibling is used, it is to request another piece of data from the same
row. Having a specialized version makes this easier and less awkward
to do, simplifying
auto sibling = index.sibling(index.row(), columnOfInterest);
to
auto sibling = index.siblingAtColumn(columnOfInterest);
For symmetry reasons, siblingAtRow(rowOfInterest) was also added.
Change-Id: Ib203b2cdb16154cbb2680d16fb5c6a7538f33d07
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
