These macros should only be called inside a test function, otherwise
they cannot abort the test function correctly. Solve this by making the
helper function return a boolean result (and output a warning on
failure to help with debugging) and verify the return value in each test
function that calls the helper.
Change-Id: I599673fda49051baf80a8c94b5d85a4d8c2cb406
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The standard IPv4 loopback address is 127.0.0.1, however anything in
the 127.0.0.0/8 range is also a loopback address.
isLoopback returns true for any address that is in the IPv4 loopback
address range, or is the single IPv6 loopback address ::1
Task-number: QTBUG-22246
Change-Id: Ic39100e2e97a52db700e01b109998a1cfd4335e3
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
Add new cases for custom types and QStringList.
Change-Id: I79f8d415be43774e6b2488e8a6a8028bf4a5fd45
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Moving three benchmark tests from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void asScrollingList();
- void cacheBenchmark();
- void contiguousCacheBenchmark();
were moved to 'tests/benchmarks/corelib/tools/qcontiguouscache'
Task-number: QTQAINFRA-353
Change-Id: Icbdd852f9c14c3df042d2e19abd42af6c645a3cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Change-Id: I33b2cf1e833fc6b1d0b3525018945148ba2d3492
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Using relative paths in #include is best avoided.
Change-Id: Iacaab7b4c402dfc96f944f21c634afa6e4a2a32a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The queries were limited to current block, because that is the
available surrounding text. Input method side, however, cannot then
distinguish between anchor being really at start or end of the
surrounding text, or beyond it. Without the limitation there at least
is a way to know anchor is at unknown territory.
Change-Id: I388d33566388344ec816ea7d86662b7e36a3d7d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Moving benchmark test from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void benchmark();
was moved to 'tests/benchmarks/sql/kernel/qsqlquery'
Task-number: QTQAINFRA-353
Change-Id: I241bb1a2fba1c1b5524c21e5941a6c5daf5a4a89
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Which required porting the related unittests to qstandardpaths
Change-Id: I6eb63c46845f05cd29cc42b59872707526277c90
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
With this change, the file template is always processed in original
QString format. Trying to generate native paths before adding a missing
placeholder mask could change the meaning of templates, such as "." and
"..", which are now tested to mean "..XXXXXX" and "...XXXXXX",
respectively.
After ensuring the template includes a placeholder mask, the path is
converted to a native *absolute* file path and the mask is sought for
again. On Windows, native paths were already absolute. On Symbian, we'd
need at least a clean path, as "." and ",," are not natively understood.
There is a requirement that the placeholder mask /XXXXXX+/ makes it
through this conversion unaltered, which relaxes prior requirements on
*nix platforms. On Windows and Symbian the conversion is under Qt's
control and not user-configurable.
Reviewed-by: Shane Kearns
(cherry picked from commit 401722ef9e6fe79bd41f9d5f79668f5c4997c8e6)
Conflicts:
tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp
Change-Id: Iac823881c865adf0931dc4f429c6c1ef135eeb56
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Besides generating a unique name, createFileFromTemplate now also
acquires a file handle on all platforms. The file engine's native handle
is passed by reference and modified in place.
This fixes a long standing security issue on Windows.
On Windows and Symbian platforms we directly use the "native" file path
when processing the template and generating the unique name. Since the
native encoding is known, conversions at this point are safe.
Errors other than "file exists" are propagated to Q(Temporary)File,
and result in a failure in open(). The changes also unify error handling
and should give consistent behaviour across all platforms.
Worthy of note, there's a change in behaviour on Windows and Symbian:
fileNames returned by QTemporaryFile on Windows and Symbian are always
absolute after open has been called. This has to do with how
QFileSystemEntry::nativeFilePath works on these platforms. (Test was
updated to reflect change in behaviour.)
Reviewed-by: Gareth Stockwell
Reviewed-by: Shane Kearns
(cherry picked from commit ff9b69838ec146aeb43d4af8a03043f9c5f0454d)
Conflicts:
tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp
Change-Id: Ibc9affb321ea4f4b193efc1f7336c9770b43d8df
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When the SkipAll mode is used, tests only report a SKIP for the first
line of test data and subsequent lines are not reported at all. This
behaviour makes it impossible for anything post-processing test results
to accurately report test pass- and run- rates because they cannot see
how many lines of test data were skipped.
This commit removes SkipMode. QSKIPs in regular test functions and data
functions are treated the same as SkipSingle, so that every skipped line
of local or global test data is reported in the test log. QSKIPs
elsewhere are treated the same as SkipAll -- skipping in init() causes
the next test function to be skipped entirely, and skipping in
initTestCase() or initTestCase_data() causes all test functions to be
skipped.
This commit only changes qtestlib and the selftests. A further commit
will change the autotests to remove the SkipMode parameter from QSKIP
calls.
Note that the change in expected output for the globaldata selftest is
deliberate, as the QSKIP in the skipLocal test function has effectively
changed from SkipAll to SkipSingle.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I7b1c53fe7ca9dde032810b789d967e2a402bbe5d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Alex <alex.blasche@nokia.com>
There are lots of buggy SSL servers around and to connect to them you
need to disable various features. This commit adds the ability to
disable the SSL ticket extension, the ability to disable the insertion
of empty fragments, and the ability to disable compression.
Task-number: QTBUG-21906
Change-Id: I3e1d0347a46e9030b889bbf15b2aad19b8513b73
Merge-request: 68
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Removed the bogusFds test, as it is only run on symbian in 4.8
Forward ported the posixSockets fix from 4.8
Task-number: QTBUG-20892
Change-Id: I8a8c67e12eae402724bbb07fe37e7ea1770aaeee
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Now, users of QBasicAtomicInt and QBasicAtomicPointer must be sure to
use .load() and .store() to access the values.
Change-Id: I6b48ed175618baf387dd38d821bd50e6e93c082e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Add a ok return value for whether found or not.
Task-number: QTBUG-21672
Reviewed-by: Olivier Goffart
Change-Id: Ic0ea7455dccf1ac91705bcc1479444eb4091ded3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Liang Qi <liang.qi@nokia.com>
Example of message of failed assert (gcc 4.6, file tst_qglobal.cpp:300):
tst_qglobal.cpp:300:92: error: invalid application of ‘sizeof’
to incomplete type ‘QStaticAssertFailure<false>’
Change-Id: Ic1798094f718eaad388d754034115aafbbb6bd5e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
By making it possible to specify the place in memory where a
type should be constructed, any meta-type can be allocated on
the stack, for example. In the QML/JS QObject binding, this
makes it possible to call slots and access properties from
JavaScript without having to perform any mallocs (e.g. due to
QVariant creation) in the C++ <--> JS value conversion, in
the best case.
In addition to QMetaType::construct() and QMetaType::destruct(),
this change introduces QMetaType::typeSize(), which returns the
size of a type in bytes. This can be used to prepare a suitable
buffer for constructing a type using construct().
Benchmarks indicate that in-place construction is 2-5x faster
than normal construction for core and GUI types on linux-g++.
Note that there is already a QMetaType::construct() function
in Qt 4, which has been renamed to QMetaType::create() in Qt 5.
In order to avoid existing usages of construct() in user code
to call the Qt 5 construct() (when they really meant to call
create()), the third argument ("copy") of construct() is made
mandatory. Hence, calls to QMetaType::construct() written for
Qt 4 will cause a compile error when compiled with Qt 5, and
the user must adapt his code.
Task-number: QTBUG-12574
Change-Id: I836f06f6ee1c1c3edbd199a03424c78c942bdd3e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Use a standard path for filenames that appear in the selftest's expected
test data. This will make future patches smaller.
Change-Id: I04b2e739d261f80d20b834e5b33c5b6e88d26379
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test duplicates the skipinitdata selftest and has slightly less
informative output.
Change-Id: Ifd40e3ef8030059ec8fa0089ce5b2a994624abeb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The DEPENDS_ON macro didn't do anything and has misled many users to
think that they can write test functions that depend on other test
functions.
Task-number: QTBUG-21851
Change-Id: Ibe65b2d5d88bb81b6a0ebbe0b220f7d409a1446c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have lived in tests/shared/util.h for a long time, but
they really belong in qtestlib.
Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that this test won't be testing anything until it gets fixed
for Qt5.
Change-Id: I4fa73883f58d8d4a533a7c21ecd4dd5b3c55b174
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that this test isn't testing anything when not built for X11.
Change-Id: I9e9ef8fe738c06eb86f2ce398f6a515bf17e220a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There is no way for a .pro file to know if QProcess is in the Qt build,
so the QProcess autotest cannot be omitted from the build if QProcess is
not available. Because of this limitation, the test was using
QTEST_NOOP_MAIN when QProcess was not available, making the test appear
to pass. This commit changes QTEST_NOOP_MAIN to QSKIP, so that the user
receives a clear indication that the test isn't testing anything when
QProcess is not available.
Change-Id: I79f667b17ff98dfc47eb61fb977365abef8883fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that these tests aren't testing anything when the required
defines are not defined.
Change-Id: I977e24205a1bb7787ecddbdb1ebbeda1f2ded321
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that these tests aren't testing anything when the required
defines are not defined.
Change-Id: I8508f50c6264fafa836090c5d6ffa6ce02dda102
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The addition of testing for multiple loggers greatly increased the total
runtime of this test, in fact making it the slowest testcase in Qt.
Fortunately this is only due to a couple of slow subtests whose behavior
is unlikely to be affected by the loggers. Change it to run these slow
subtests just for a couple of loggers, instead of all the combinations.
Change-Id: Ie90f6c0ca29470ed6a7c4e2e185f852602a2d162
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
There is no way for a .pro file to know if exceptions are supported in
the Qt build, so these tests cannot be omitted from the build if
exceptions are not supported. Because of this limitation, these tests
were using QTEST_NOOP_MAIN when exceptions were not available, making
the tests appear to pass. This commit changes QTEST_NOOP_MAIN to QSKIP,
so that the user receives a clear indication that the test isn't testing
anything when exceptions are not available.
Change-Id: I2facf08ba69e6f985e2da50dd36ad2658246b22e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The QCopChannel class was removed during Qt5 refactoring.
Change-Id: I62914eca1db65c680d90233ce9dad5d891890c4a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The qgraphicswidget and qgraphicsproxywidget tests are empty if Qt is
built without the cleanlooks style, so don't build the tests in that
case.
Change-Id: I2308e723a9b0abcc3e95b32a562fcb02afe0444d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test appears to be applicable only if building with g++, and even
then the test is broken.
Change-Id: I9eefb13325a10ec295a59c2bd1111e3c324ff94f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test was empty, the logic having been recently removed because it
only applied to the Carbon UI, which will not be supported by Qt5.
Change-Id: I2b5d6aba6be4a51eadbac3ca9d19d1a68c4fc1ab
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is only valid with obsolete Qt Solutions packages. Any Qt
Solutions that are still of value need to be rewritten as Qt5 addons and
will be delivered with their own unit tests.
Change-Id: I099ef816655cc7de13715f5a4e5f4a06099df2d5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make the parent .pro files follow the pattern of listing all tests in
one place and then removing inapplicable tests as needed.
Change-Id: Ide1ae98d50dd63cd8c1b4d6fd53135cdff801bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
