We can squeeze, but not by discarding elements. Make sure the size of
the object stays intact after changing the reserved capacity.
I've also added unit tests for other containers, just to be sure.
Task-number: QTBUG-37750
Change-Id: I5135b095943b7589423c51cebcb52af792468e61
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The code did discard the the data, so it wasn't affecting the comparison
result (tests added anyway), but it could cause crashes if the pointer
to the beginning of the data in the first 8 bytes of a page.
Change-Id: I618e68de329b65de34ef8c934934c3e631cc6c9f
Reported-By: Erik Verbruggen
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
It doesn't depends on windget for quite a long time already.
Change-Id: I251e2e0d52028d17a61c892308d099f344728e79
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
That #ifdef is placed before any include, so it has no effect.
Change-Id: I4bbf967bda720d287b363847669c5c7a22807bc4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Actually guarantee cursor doesn't move in this case for both logical
and visual modes (just what the documentation says we already do ;)
Change-Id: Iabdca7aa1d205672386a0095e3487e585611cdb5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To guarantee proper positioning at the end of the last line in a
bidirectional text we have to insert the eol position into the
insertion points vector, accordingly to the visual ordering.
Detection of the last *logical* item in a *visual* line is unrelaed
to the text direction, it is simply `iterator.item == iterator.lastItem`.
[ChangeLog][QtGui][QTextLayout] Fixed visual cursor movement
in bidirectional text.
Task-number: QTBUG-18060 (partially related)
Change-Id: I53b6ab889ef580ab0560b620b808b1e09efc0fbd
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Ahmed Saidi <justroftest@gmail.com>
Initialize directory delayed in shared code and add checks to verify
that it is valid. Close attached / cloned databases to prevent locks
on files and leaking temporary directories caused by SQLite:
QTemporaryDir: Unable to remove "...\Temp\tst_qsqldatabase-P1XkOA" most likely due to the presence of read-only files.
QTemporaryDir: Unable to remove "...\Temp\tst_qsqltablemodel-P1XkOA" most likely due to the presence of read-only files.
QWARN : tst_QSql::concurrentAccess() QTemporaryDir: Unable to remove "...\Temp\tst_qsql-l0VAKJ" most likely due to the presence of read-only files.
Change-Id: If85bbaed04bb1a32e427d642be332996d967f796
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change b94493e revealed that in the lance script rendering, at the
surface_end command, cleaning up the fbo stuff and enabling the
ordinary painting again was done in the wrong order.
Change-Id: I358dafeffe95b25303fc2a8dc1d61384b2ca64fb
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
One problem was that tests expect the top-level window to have a certain size,
which is not possible on BlackBerry. Another problem was that certain elements have a
dpi dependent size which the task250754_fontChange test did not consider.
Change-Id: I465ebe234a74d6150cdcbb7fc7e458a62155e0d0
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Using show() might result in showFullScreen() on some platforms,
so let's use setVisible(true) which has the same effect and seems
to be a more crossplatform solution.
Change-Id: I712584ace2adbe73b99e620a1ae5e88ff328fffb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Some quick benchmarks against GNU coreutils 8.21 and OpenSSL 1.0.1e
(time in µs; time for coreutils and OpenSSL include the loading of the
executable):
Qt Coreutils OpenSSL
n SHA-1 SHA-224 SHA-512 SHA-1 SHA-224 SHA-512 SHA-1 SHA-224 SHA-512
0 0 0 0 717 716 700 2532 2553 2522
64k 120 484 381 927 1074 966 2618 2782 2694
Diff 120 484 381 210 358 266 86 229 172
The numbers for Qt are pretty stable and vary very little; the numbers
for the other two vary quite a bit, since they involve launching and
executing separate processes. We can take the lesson that we're in the
same ballpark for SHA-1 and we should investigate whether our SHA2
implementation is sufficiently optimized.
Change-Id: Ib081d002ed57c4f43741eca45ff5cd13b97b6276
Reviewed-by: Richard J. Moore <rich@kde.org>
One issue was that the text of a QPushButton would stretch the widget if the
platform font is to big. The other issue was that the autotest did not expect
that show might translate to a showFullScreen on some platforms.
Change-Id: I3a9903979d766d04c402fda309d0492cfa506ed6
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
In the sizeHint test the show command was replaced by showNormal.
This fixes the test an all platforms where show translates to
showFullScreen.
Change-Id: I307790a6987c61a57679094b26818383815036a0
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Only accept lower-case "true" and "false", as documented.
The old check didn't match either the documentation, nor the QSettings/
QVariant behavior (where, for a boolean value, any lower-cased content
that not empty, "0" or "false" is considered true).
Change-Id: I317d29c16a27f862001b9dff02e8298df8acf5a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Patch 9a08483d76 introduced a regression,
tst_qmetatype test was not meant to be removed.
Change-Id: I5456ffbbd9d9f8e461f828c6183e46dabf67952b
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On QNX grabbing the frame buffer returns the content of the back buffer.
In order to execute the OpenGL tests properly a swapBuffers is executed before
in order to be able to retrieve the content of the front buffer.
The patch also documents this platform behavior.
Change-Id: I7a501818ec6eea061f2f54f95854f68cb72e0534
Reviewed-by: James McDonnell <jmcdonnell@qnx.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This patch aims to provide an updated test that follows changes started
in 10.7: new rule is that only root can access SystemScope settings. It
also disables the sync() workaround code path which is at least not
executed during the tst_QSettings execution and returns wrong value to
the test.
From Apple's documentation:
"Note that modification of some preferences domains (those not
belonging to the “Current User”) requires root privileges (or Admin
privileges prior to OS X v10.6)—see Authorization Services Programming
Guide for information on how to gain suitable privileges"
https://developer.apple.com/library/mac/documentation/CoreFoundation/Reference/CFPreferencesUtils/Reference/reference.html
[ChangeLog][QtCore][QSettings] QSettings now returns the correct value
for isWritable() when using SystemScope settings.
Task-number: QTBUG-9824
Task-number: QTBUG-21062
Task-number: QTBUG-22745
Change-Id: Ib6a1490ec596b99d189ec4de9a0f28ecfd684172
Reviewed-by: Liang Qi <liang.qi@digia.com>
In tst_QEvent, add a check that exhausts the available event type ids and verifies
that registerEventTypes() returns -1 in that case, as documented.
I haven't found a way to test the other case in which -1 is returned.
Since this test operates on a global write-only registry the new test case needs
to keep track of whether the earlier test cases have run successfully. If they
didn't, skip this test case.
Change-Id: I68ea9d17d10dcec22175994aba269dd09c9adf43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A test for a hint > QEvent::MaxUser was missing.
Added.
Change-Id: I00c1c45f6673f35d4203df15b4ffc35f57273e46
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes failures on Windows 8.1.
Task-number: QTBUG-37822
Change-Id: I30460f430e2249555c4e857237e27aa9b03dfa1b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Change the test widget to use a non-single-shot timer
to hide the menu once it has become visible.
The test shows hangs on Windows 8.1 CI nodes.
Task-number: QTBUG-37822
Change-Id: I8fc782e53256616119920aef714f89f25863b39f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Ensure triggered() and task176137_autoRepeatOfAction()
are using an active main window. Change click timer in
triggered() to repeat until the menu is visible and
add a timer to close the widget and bail out if the
simulated click fails to close the menu.
Task-number: QTBUG-37822
Change-Id: If675660d02335bffd5caa89796914924dad1a909
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
QFontDialog should always show the correct size, even if the size
is not available in the list of standard font sizes. Native font
dialogs across common platforms show the correct size at all times.
Inside init() function, the size list requires proper initialization
since the initial value of size is zero.
Task-number: QTBUG-10317
Change-Id: Idc9e922ac95f797ac98bbf6c885e52828c4c48fd
Reviewed-by: Liang Qi <liang.qi@digia.com>
The calculation of the width/height required for the
scaling algorithm was prone to floating point rounding
issues, where the lower value got rounded down, the higher
one rounded up. This could lead to a situation where we
iterated over one more line/pixel in the line than we have
in the source image.
Correct this by passing the dimension of the source image into
the function and bounds checking the values before iterating.
Task-number: QTBUG-35927
Change-Id: If44b2235a479224660d508a0504fec40d724763a
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
We don't support xlfd fonts anymore and indeed QFont::setRawName()
is an empty method.
[Changelog][QtGui] QFont::setRawName() and QFont::rawName() are
deprecated.
Change-Id: Ic52d42a9bc200ba8b246dd4e28c77f84e086dad5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
- Record the last event ID with every callback. This event ID is passed
to FSEventStreamCreate when restarting the stream, so the watcher will
receive all events that occurred since invalidating the previous stream.
- Never start with kFSEventStreamEventIdSinceNow, because this will
generate a (bogus) soft-assert in FSEventStreamFlushSync in CarbonCore
when no event occurred since stream creation. The last globally
generated event ID is used instead to simulate the "now".
- Do not dispose and recreate the stream in the callback, but use a
queued signal-slot connection to schedule this on thread that owns the
watcher.
Change-Id: I02f5a845d9e27f9853ed97925ab9c7a5bc0dede1
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Introduce function checking whether the system settings in
native format can be written to. If not, default to user scope or
skip the respective tests instead of failing.
Task-number: QTBUG-37822
Change-Id: I330aff9b79bb22254216f022af807e010bc8e8ba
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
After a test ended, we would instantly try to fetch its output,
but at this point, it might still not be available through the
adb interface, probably due to some cache synchronization in the
file system? Adding an arbitrary three second pause between
finishing the test and requesting the file fixes this. If the
error pops up later again, we could do something more robust,
like going in a loop for X seconds until the file has been fetched.
Especially if detecting task finish was successful.
Task-number: QTBUG-37444
Change-Id: I5442e1e0181f489b0626834a390e46c15bc0b371
Reviewed-by: Simo Fält <simo.falt@digia.com>
This patch fixes an issue when a font that was added with
QFontDatabase::addApplicationFont can not be removed any more.
The reason for that is that QFontconfigDatabase::addApplicationFont
adds the font to the FontConfig application set from where it
cannot be removed any more and is picked up every time the font database
is repopulated (e.g. after a call to QFontDatabase::removeApplicationFont).
This also fixes the QFontDatabase autotest which unfortunately does
not fail on linux, because it tries to add "FreeMono" (which in most
cases is already there as a system font). So this patch removes FreeMono
and adds LED_REAL as test font.
Change-Id: I70fc823075923aa426da1eb3e052affcc416e399
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
On QNX a actual platform window is not created unless the window is explicitly
postet (raster) or a swapBuffers (opengl) is executed.
Change-Id: Ia06b97ea1a477d59e78d74d895c5d6ba6dd86edf
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
This simplifies how we handle QNSView for accessibility purposes.
Instead of trying to half-merge the top level widget
(window->accessibleRoot) into the view, just have the view
always return it as child.
This makes the accessibility implementation for QNSView simpler
and makes applications that show a top level widget such as a button
possible. (We would return accessibility ignored for the button before).
As a side effect finding the active focus and hit-testing should be more reliable as
well.
Task-number: QTBUG-37794
Change-Id: Ib52037f88da8887a0bdc77204b0f3daddfe7709d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This test takes more than 5000ms to finish some times, so waiting
for 10000ms should be enough to make it more stable on all
platforms.
../tst_qprocess.cpp:1072 :: [gui app]
QTestLib: This test case check ("proc.waitedForFinished") failed because the requested timeout (5000 ms) was too short, 6150 ms would have been sufficient this time.
Change-Id: I266ad0e65bf3c84e73b7ca6543dc15335dad4c99
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Extending this to stock QNX as well since it is not
BlackBerry 10 specific.
- tst_QNumeric::floatDistance()
- tst_QNumeric::floatDistance_double()
- tst_QtJson::testNumbers_2()
- tst_QtJson::toJsonLargeNumericValues()
- tst_QtJson::parseNumbers()
Task-number: QTBUG-37066
Change-Id: If0e5d4fbefac5e8a0efed8ef8b1b7655ff6e7766
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Constructing a QCollator is somewhat expensive, and made
localeAwareCompare really slow. As QCollator (at least with
the ICU implementation) is not thread safe, use one collator
per thread. This speeds up collation of a long list of strings
by a factor of 250 for the test case in the bug below.
Task-number: QTBUG-36149
Change-Id: I645cdc3546347d1dcc7a03b7563b628c7f756944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Output the SSL library version, output socket error string on connection
failure consistently, silence numerous warnings about QIODevice not
being open in tst_QSslSocket::constructing.
Change-Id: Ia23d42de5b2daca55b2f6f50af025d61e99c52a0
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Add all the available QPrinter options to the QPrintDialog manual test
to allow for testing presets.
Change-Id: Ia6394094fc9920da0d6c645793d51650404899d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Convert the manual print dialogs test to use a ui file as subsequent
changes will add a lot more widgets.
Change-Id: I06ac54b67532f0eea1e91a2d9aca4f587d2fa332
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The text shaping process has been unified for all platforms.
Task-number: QTBUG-23064
Task-number: QTBUG-24565
Task-number: QTBUG-26495
Change-Id: Ida4c4be85f1a72c04399d2e6760fa36b33a0464e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QQuickWindow depends on maintaining state of known touch points
between events, so it needs to be notified when it will not be
receiving the corresponding release event for one or more.
This temporary fix needs to be reverted when we have a proper
event forwarding solution.
Task-number: QTBUG-37371
Change-Id: I5dc40af6feac425be8103c1586f8ebe3a6aad20d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>