The large file flags in qmake land are set in the
mkspecs/features/unix/largefile.prf file, which is loaded by qmake
when a CONFIG += largefile entry is written by configure into
qmodule.pri.
This essentially makes them global flags for all private Qt targets
because qmodule.pri is a global file loaded load(qt_build_config)
Thus assign the flags onto the PlatformCommonInternal target instead
of the PlatformModuleInternal one.
One peculiarity though is that in qmake land these flags are also
applied when building examples as part of the main Qt build. This
is because qt_build_config loads qmodule.pri even for an example,
because qmake sees it as part of the overall Qt build.
The flags are not applied by qmake if the example is built in
a different standalone build dir not part of the Qt buil dir.
We don't do that in the CMake build, and thus examples will never
have those flags.
Task-number: QTBUG-83929
Change-Id: If653a669b4835aadd1de84acb477c375ab523909
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The qt_internal_apply_gc_binaries function should apply both compile
and link flags, not just link flags.
The flags should be applied publically to all consumers of Bootstrap
regardless if the gc_binaries feature is enabled.
The flags should be applied publically to Core only in case if the
feature is enabled (aka for static builds only).
Change-Id: Id42af0d9b527004d74c04eff2c9e3c2be1e76aac
Fixes: QTBUG-84461
Task-number: QTBUG-83929
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This mirrors what qt_tool.prf does.
Task-number: QTBUG-83929
Change-Id: I892a3f5f62d461456abfa414718fcc4c4c05c012
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Like in the qmake build, we now set the target description of a Qt tool
to a value, different from the description of the Qt libraries.
Fixes: QTBUG-84900
Change-Id: I93419ddd513c83fe8488e70b5a8328cadc3541c7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In a qmake build this file serves the purpose of setting the right
prefixes for the build directory's qmake binary. This can be used to
build Qt repositories other than qtbase, esp. in a top-level build.
In the CMake build, we don't have qmake top-level builds, and we do not
support building Qt repositories with the build directory's qmake binary
(exception: non-prefix build).
To build a Qt module or user project with qmake, the installed qmake
must be used.
This fixes qmake for non-prefix top-level CMake builds.
Change-Id: Ibd10c36e8359225553d782d0c8117760db9f3370
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In static builds, due to our CMake design for auto-linking plugins
being incorrect we sometimes cause link failures on Linux in leaf
modules, because the link line order is incorrect.
So far such failures were fixed by explicitly modifying the order of
libraries on the link line in each failing CMake project.
This proves to be problematic because the failures appear in seemingly
random integrations that don't even touch the build system parts.
Until we fix the design, another less performant but more
general / safe way is to increase the link interface multiplicity,
which causes a cycle of libraries to be repeated more than 2 times
on the link line, thus giving the ld linker more chances to figure out
which symbols are needed for linking.
Implement this for Linux static builds to avoid random integration
failures for people that know nothing about this issue.
The link multiplicity for all qt modules is increased to 3, thus
QtGui would be repeated 3 times on the link line of each dependent
library. The value is also configurable via the
QT_LINK_CYCLE_MULTIPLICITY cache variable.
Task-number: QTBUG-83498
Change-Id: I2fd2bb2b5e7fec4e3ef5d1194668b524d20f7067
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
To be in line with the qmake build we drop the "d" suffix for MinGW
debug libraries unless the debug_and_release feature is enabled.
Task-number: QTBUG-84781
Change-Id: I1b83492bff561d3d7647dde467931ec3866ae940
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When doing a top-level build,
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX is not set in the
top-level scope. There's no point really in using the relocatable
path anyway, given this will only be displayed once when either
configuring qtbase or qt6.
Just use CMAKE_INSTALL_PREFIX directly.
Change-Id: Idb7e1953745f55048c42155868c2dd9384876c7c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It used to be called HAVE_DASH_UNDEFINED_ERROR, but that always
cause Coin to print the compile check as the first build error snippet
because it contains the word "error", and whenever you get emails from
Gerrit the first snippet is always this compile check.
Rename it to avoid confusion in emails and Coin status reports.
Change-Id: I5487623abf9df177b100d2b45635688504f0e25a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For static builds of Qt we installed the plugins into the lib
directory. However, they are expected in the plugins directory tree.
This happens, because we pass a value of an uninitialized variable to
ARCHIVE DESTINATION in the qt_install call in qt_internal_add_plugin,
and CMake defaults to "lib".
This flaw was introduced in b42feb02ce with the following intent:
"This patch also changes add_qt_plugin() to use the value provided in
INSTALL_DIRECTORY for ARCHIVE_INSTALL_DIRECTORY if no value is provided
for the latter."
The patch changed the value of arg_ARCHIVE_INSTALL_DIRECTORY but
missed to set the variable archive_install_directory, which is
actually used in the qt_install call.
We now directly set archive_install_directory and remove the unused
archive_install_directory_default variable.
Task-number: QTBUG-84781
Change-Id: Ifd0475d8452272e8765bf42fd912a45cfa3dbbd1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Because find_package usually creates targets in a local scope,
qt_generate_prl_file fails to generate a .prl file that has
references to generator expressions like
"$<TARGET_FILE:Freetype::Freetype>" which references targets
that are not found in that specific scope (e.g Freetype target is
present in qtbase scope, but not qtsvg scope).
This happens in static top-level Qt builds, and thus fails the
configuration. While we try to figure out how to fix this adequatly,
don't generate .prl files in such a configuration.
Task-number: QTBUG-84874
Change-Id: I69cf0ad1419d21e3676e1374624601f00936c405
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Users / developers usually configure a single example. The CI
can still continue to explicitly configure and build all examples.
Task-number: QTBUG-84471
Change-Id: I1c9ac857e7ad0e5602037265194f0a6742386b51
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Fixes the 'add_library cannot create imported target "dbus-1"
because another target with the same name already exists' error
when doing top-level static builds.
It's caused by the loading of Qt6DBus dependency when configuring
qttools.
Task-number: QTBUG-84874
Change-Id: Ia84ed460c4ce25de45fb41cb13edd0e63a276f11
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmake_use.prf understands the _DEBUG and _RELEASE suffixes for
QMAKE_LIBS_XXX entries. The CMake configuration "Debug" is considered
for the _DEBUG entries, "Release" and "RelWithDebInfo" for _RELEASE.
The qt_lib_XXX_private.pri files are now generated in multiple steps:
1. The QT_LIBS_XXX information is generated per $<CONFIG> and written to
.cmake files.
2. A preliminary qt_lib_XXX_private.pri file is generated, containing
only configuration-independent data.
3. A custom command runs the QtGenerateLibPri.cmake script that combines
the files from step 1 and 2 into the final qt_lib_XXX_private.pri
file.
The same is done for mkspecs/qmodule.pri.
To be able to trigger custom commands from header modules, which are
interface libraries, we introduce one XXX_timestamp ALL target per
header module that creates a timestamp file. To that XXX_timestamp
target we add the pri file generation target as dependency.
Fixes: QTBUG-84348
Change-Id: I610f279e37feeb7eceb9ef20b3ddfecff8cfbf81
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The module pri files of internal modules did not expose any include
paths. They must have both, the public and the private include paths.
Task-number: QTBUG-84781
Change-Id: I3cbe94d4e49c754e49d26b00012e668b0afbdc8f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MinGW plugins should not have the lib prefix in the shared library
names. Do this manually for a couple of libraries, and also for the
generic qt_add_cmake_library function.
Amends 9b0e23ef8a
Change-Id: I1cfaf8fc046f86edd3e755adfa599aa0aa854ee3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is needed so that other repos other than qtbase (like qtopcua)
can still find_package(WrapOpenSSL) successfully.
The path needs to be converted to a CMake path, to avoid issues
on Windows with backslashes.
Change-Id: I3d7652d93110f6b8f39a58a6c28aef6c7471aea7
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT might be empty on the
first configuration, but because QtBuildInternalsExtra sets the
CMAKE_INSTALL_PREFIX, a second reconfiguration of a test would
stop setting the fake install prefix.
After some further consideration, there's no need to set the local
fake prefix conditionally, we can always do it (unless explicitly
opted out).
This makes sure that a reconfiguration of a test doesn't suddenly
install into the Qt prefix again.
Amends 37b132cd4e
Task-number: QTBUG-84346
Change-Id: Ic61aefe18418658455d8cdb9ebe6bcbcb8d67c99
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
They are not necessary, and they conflict with what qttools generates.
Fixes: QTBUG-82133
Change-Id: I4a1273d694626345b32b45c653dd31d3b78621eb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now that the whole file is not included when doing standalone tests,
the conditions are not needed anymore.
Change-Id: I49ddd2fc4a8327e09529948785f40cda5dedbb11
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Three different people have encountered the issue that calling
calling qt-cmake on a project prints 1000 inclusion lines of the same
qt toolchain file, and then CMake bails out saying can't find the
CMAKE_MAKE_PROGRAM Ninja.
This happened because people accidentally called qt-cmake to configure
qtbase (instead of just cmake), which created a toolchain file that
chainloads itself recursively.
Error out when configuring qtbase, and when using the generated
toolchain file in the case when it would try to include itself.
The solution is to remove the qtbase CMakeCache.txt file, and
configure qtbase again, so it generates a proper qt.toolchain.cmake
file.
If somebody feels enthusiastic, they can move the check into the
qt-cmake and qt-cmake-private shell scripts, and error out before the
qtbase/CMakeCache.txt is polluted with the wrong toolchain file.
That is left for people that feel more comfortable with bash and batch
scripting.
Change-Id: If518c94791fe7c30731e6e462e347f26a5213c64
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Include headers in .pri files should point to the framework Headers
dirs.
The module name in the .pri file is not versioned when it's a bundle.
Paths to system frameworks in .prl files should instead be replaced
with -framework Foo flags.
Change-Id: Ia353d033799fae40a1bc55fad6f86b2c8ef76c56
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
We reported that double-conversion was found on macOS if the std
library supported sscanf_l and _snprintf_l, but that's different
from what qmake does.
This caused not to compile and link the bundled double-conversion
sources, and caused tst_qvariant to fail when doing double conversions
on macOS.
Remove the extra config tests, and make it work like in qmake, so that
the bundled code is used instead. This makes tst_qvariant pass.
Amends 729a73a9cf
Change-Id: I7ddaed5fe6916f483fb3de1962657d7fb6fb40be
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
And also fix qt-cmake-standalone-test to work for prefix builds.
The gist of it is that we have to protect tests not to be installed
into the Qt install prefix, but we also have to make sure that the
CMAKE_INSTALL_PREFIX is not changed globally (via cache value),
so that reconfiguration still works.
This took way too long to figure out.
Amends d6272d774c
Fixes: QTBUG-84346
Change-Id: I18c29574c9957fe05b86f701c8c14ec07e0f045b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Qml tests currently don't expose a CMake target, so no
dependency should be added to a non-existent target.
Make sure to add the check target only if the test was previously
added.
Fixes configurtion failure of qtdeclarative tests.
Amends 873aa682c5
Change-Id: Ic8bbfe668c00c1ce05f1e1dfe5494dafd91dd7b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch allows tools to be built for the target platform when the
QT_BUILD_TOOLS_WHEN_CROSSCOMPILING parameter is set at configuration
time.
To avoid naming conflicts, the target tools are suffixed with "_native".
The qt_get_tool_target_name() function can be used to get the tool name
for both scenarios (cross and non-cross compilation).
Extend pro2cmake to refer to the right target name for tools.
The relevant write_XXX functions have a new target_ref parameter that
will be "${target_name}" for tools and literally the target name for
everything else.
Fixes: QTBUG-81901
Change-Id: If4efbc1fae07a4a3a044dd09c9c06be6d517825e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Given a test named "tst_qdrag", you can run "ninja tst_qdrag_check"
to build and run the test.
Change-Id: I47dccb39dd60fca9cb07ff9af9fb739b293c5aaf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This avoids issues with some special characters and spaces.
Change-Id: I6b7cedbe2c9663f62fae104488454faebab52ce0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake sets "lib" as default prefix for Windows-GNU platforms.
Change-Id: I49e3123c385610307c84c584a21f5f3827a6fafd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The function name has been changed upstream (3.18).
Change-Id: I76a26cdc8de71dffa5402a7c7423006a7a01552e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's only calls were with the PUBLIC argument, so remove the argument
both in the declaration and call sites, and just return the public
dependencies.
Fix up the names of the variables as well.
Amends b56dc55c3a
Change-Id: I830c1894376d0d3a2eb2bd4ffa38a1b3b3066292
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Previously we checked the LINK_LIBRARIES property of the main module
target, but we should instead use the values of
INTERFACE_LINK_LIBRARIES set on the FooPrivate module.
Because both versionless targets and private targets are interface
libraries, we need to properly differentiate between them when
following versionless targets to their main associated target.
To do that, instead of using string comparison, export an additional
private _qt_is_versionless_target property, and query that.
Also make sure to set and export the _qt_config_module_name property
on the FooPrivate targets.
Also make sure to APPEND to EXPORT_PROPERTIES rather than override
(looking at you QtFeature.cmake).
Task-number: QTBUG-75666
Change-Id: Ia3261e218840e9f5217ab49755e8c876560e294d
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Needed to avoid linker warnings transformed into errors, when linking
QtWebEngine with qmake mixing.
ld: warning: linking against a dylib which is not safe for use in
application extensions:
The flag is added to libraries and plugins, unless opted out.
CMake equivalent of 944110089d
Task-number: QTBUG-83929
Task-number: QTBUG-75666
Change-Id: I3e9acca4712c9a266bf54c6e35e2fd2c0096692b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Qt module targets now export the "_qt_config_module_name" property,
which contains the module's name in qmake land. This can be different
from the lower case target name (e.g. Test vs testlib). This exported
property is used when retrieving the dependencies of a module outside
of qtbase.
The property's name is a bit odd and lower case, because we want to be
able to set it on INTERFACE_LIBRARY targets, for instance header
modules. This CMake pecularity is described in
https://gitlab.kitware.com/cmake/cmake/issues/19261
Fixes: QTBUG-84287
Change-Id: I4a75af3ebeabebc56a0f77d464e45ab7fd81eafa
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit e875f45805.
Reason for revert: syncqt creates a master header that includes
the *Depends header. Therefore we must always create the *Depends
header. Ignore for now that *Depends headers are empty and pointless
for module headers.
Change-Id: I1dcc836788b3d46c4f1b504d2d64e9eb67b66206
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For now, we have to turn off the 3rdparty lib generation code for
qt_lib_XXX.pri files, because it's broken for NMC if the 3rdparty
libraries have different binaries per config.
The actual fix is more involved.
Task-number: QTBUG-84348
Change-Id: I863e69085b68c0dbbb3f6c415111bc255799e155
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce a qt_finalize_module function that is called as a
CMakeLists.txt finalizer and call qt_generate_module_pri from there.
This is done in preparation for writing the QT.XXX.depends entries to
the module pri files, because we must do this after all dependencies
have been added.
Change-Id: Ia61db73383541651389fd647523ef535792874d4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If an OUTPUT_DIRECTORY option is provided, it should be used instead
of discarding it.
Change-Id: Ie53b56616f16589f7c05ff9378d7ba2e2ba34726
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The module pri files are supposed to add their public features to the
global QT_CONFIG variable.
Change-Id: I9a1719f897747a1d89011b1f1231c05a23539def
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoid writing module_plugin_types-NOTFOUND into the module .pri files.
Change-Id: I2fed7b0d1c21e2233eebcaca419f522a07d22af4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Calling cmake --install . only installs a single configuration.
To install both debug and release artifacts, the install
invocation needs to be done for each configuration.
To keep the Coin instruction code simpler, delegate the looping
over configurations to a custom CMake script, and use it in the
Coin instructions.
Replace all cmake --install calls in the instructions with calls
to either call_host_install.yaml or call_target_install.yaml.
The path to the script depends on whether we are building
qtbase or another module. In the former case the script should
be called from the build dir, otherwise from the install dir.
The other distinction is whether the host or target env prefix
needs to be added.
Task-number: QTBUG-80900
Change-Id: Ied4bf739e2b1a2307f22fc79c1cfad746c8cbc44
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When using Ninja Multi-Config, we don't want to install a "Release"
moc.exe, and then override it with a "Debug" moc.exe.
Because it doesn't seem possible to exclude installation of targets
per configuration, put the non-main configuration tools into
configuration specific subfolders like "bin/Debug", so no overriding
happens upon installation.
Introduce a new function qt_get_install_target_default_args() which
returns install destination arguments for consumption in qt_install()
calls. The function adds the config-specific suffix to the destination
for the appropriate configs.
Each call to qt_install *adds* new rules for installation,
which means that export registration needs to happen only on the first
call.
Make sure qt_add_tool doesn't ask qt_add_executable to install
yet again, to create duplicate rules.
Apply the same install arguments logic to qt_add_executable calls.
Task-number: QTBUG-80900
Task-number: QTBUG-80901
Change-Id: I3e732d27dba5bf5f8059d2878ef1e425237d383a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Thus we will build both Release and Debug configurations in Coin
when cmake --build . is executed, mimicking qmake's make which
builds both configurations in debug_and_release.
Task-number: QTBUG-80900
Change-Id: If48aca249eb84e690d3f9d51a733b3a25df1f7ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Where NMC is the CMake Ninja Multi-Config generator.
The first use case is to allow building standalone tests with one
configuration even if Qt was build with multiple configurations.
Another use case is for regular Qt consumers that might use the
generated qt-cmake shell script which does not have the generator
specified (as opposed to qt-cmake-private).
Another detail is to use the first configuration from the initial
Qt configurations list (CMAKE_CONFIGURATION_TYPES) when building
standalone tests with a single config generator, so that it doesn't
default to Debug, but rather to the provided first configuration.
This matches qmake behavior, where on Windows with a
debug_and_release configuration, tests are still built against
release.
Task-number: QTBUG-80900
Change-Id: I0da91c1f91095332cfe9e38d17f440aad6a09d15
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Set the target property INTERFACE_MODULE_IS_HEADER_ONLY for
header-only modules, and only create *Depends header files if this
property is falsy.
Change-Id: Ic6b100787d18b3ff1f7b9d0f2b5c744018b1f295
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This value is the equivalent of qt_module.prf's MODULE_INCNAME and can
be used to specify a name for the module's include subdirectory. The
default is Qt<ModuleName>.
The include name is stored in the module's target property
MODULE_INCLUDE_NAME.
Change-Id: Ie6c8f6882ee2c3db78884ae5781593c803be3c05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And enable the same default when building Qt itself (it's implicit).
Allow opting out on a target-by-target basis, by using the public
qt_disable_utf8_sources() API call.
Change-Id: Ifc19a744d57b96b1c74a6926a0c6628c2a820464
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before, we were setting those properties only for Qt modules.
Now, Qt executables and plugins have a full VERSIONINFORMATION
resource on Windows.
Also, extend the CMake API with the possibility to pass target
information to modules, plugins and tools. This will be used in a
subsequent commit.
Change-Id: I2bb8d3637569e0eaec76f56331bc23282285d872
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is needed for building Qt plugins with qmake against other
CMake-built modules.
Change-Id: Ibd6ad0b08645c798be74285b24f71add947bea88
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise when applied to bundled 3rd party library C files,
the MinGW build fails when compiling src/3rdparty/md4c/md4c.c.
Change-Id: Ia522b10aa69aa15f239d20c65e31c84edbccee6d
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Due to the install prefix being changed for standalone tests,
the correct $qt_prefix/bin folder was not added to the PATH
environment variable when running tests.
Make sure to always include the the original qt install prefix,
even if a different install prefix is specified when configuring
standalone tests.
Amends 39090ea15c
Change-Id: I22aab732bb2bb679074a811d28d8209e1d535df3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Gets rid of mismatch warnings when looking for various
ECM packages like XCB.
Change-Id: I0bf4db993195993df7789c032454b7883e8efd35
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Enable sse2 and fpmath for modules when appropriate, the logic
is a port of the code in mkspecs/features/qt_module.prf.
Fix qdrawhelper.cpp to always be compiled when using GCC with a
special case. pro2cmake.py failed to handle the source subtraction
correctly.
Fixes: QTBUG-83791
Task-number: QTBUG-75578
Change-Id: Ibe32a250b266d580ad21f6c55f09fd03a14ceb82
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
... and update handling of CLASS_NAME in qt_internal_add_plugin
Change-Id: Iec8e5f9f80df02c9ba21648535872988839f4b64
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Traditionally, these make targets generated HTMLs
and QCH only. This change fixes the dependency for
these targets to ensure that behavior.
Fixes: QTBUG-83877
Change-Id: Ic7c8afe5853d33fc4cc4cfd996f87e5f65df31ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
It broke configuration of qtwayland standalone tests, due to qtwayland
doing 3 separate qt_find_package(Wayland) calls with the same package
but different arguments in 3 different directory scopes.
The top scope didn't have PROVIDED_TARGETS argument. The rest of the
scopes did have the arguments with either Server or Client, but because
of the debug behavior above being enabled by default the dependencies
weren't registered in the Qt6WaylandClientDependencies.cmake file (and
the server equivalent).
The registration didn't happen due to the skipping logic, when a package
is found and the targets already exist.
This led to standalone tests failing to configure because they tried
linking against non-existent Wayland::Client and Wayland::Server
targets.
This reverts commit dd7e40b108.
Change-Id: I60e358a4891b84ecec0e127d9de8ab9747a6ab24
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Previously configuration of standalone tests might have failed
due to CMake trying to create files in the /usr/local default
prefix.
Make sure to use a fake prefix in the binary dir instead,
unless another prefix is explicitly specified.
Change-Id: Icfcb32285aa5596abf1a918396b26673880a8d27
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMake IMPORTED targets should be namespaced so that CMake knows that
the name refers to a target and not a file.
Use the existing WrapXXX naming scheme where applicable.
Fixes: QTBUG-83773
Change-Id: I5b0b722c811200c56c260c69e76940a625228769
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a SKIP_AUTOMOC argument to qt_add_3rdparty_library and use it in
BundledHarfbuzz.
Change-Id: Ie4aa61639a5ab64f286ac539989572a9ae6bc3d5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to the wrong string comparison, we were writing out the wrong
architecture for the arm64 builds to the deployment settings json file.
This leads to androiddeployqt tool not being able to locate the
stdlibc++.
Change-Id: I3d13b14c27f043445bf46aaca0e9f862f6ca84e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch allows all the sqldrivers to be built as a standalone project.
It is not possible to build each plugin separately due to the configuration
features definition being located in the sqldriver's folder CMakeLists.txt.
In other words, the project needs to be generated from the
src/plugins/sqldrivers/CMakeLists.txt file.
Fixes: QTBUG-82962
Change-Id: If41c7e3827589391830a894a9c998d2e56239562
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Without this behavior enabled by default it is currently not possible to
build QtVirtualKeyboard as a static build. We run into the error where
cmake is trying to promote the targets to be global due the XCB library
already being found by one of the modules in QtBase.
In case we wish to disable this fix, any module can simply specify
QT_FIND_PACKAGE_DISABLE_DEBUG_BEHAVIOR=ON during configuration time.
Change-Id: Id7f2ad12ddea941dda754361660c7606439cd5a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is Windows-only and must be turned on manually.
For MSVC it sets the MSVC_RUNTIME_LIBRARY target property.
For MinGW it adds the -static linker flag.
Change-Id: I9da3b88d545b34bc34a3a80301b2dd1b5986fa88
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds a publicly callable qt6_add_plugin() API to create
plugins. This API is meant to cover cases such as the plugandpaint
example.
This patch also renames qt_add_plugin to qt_internal_add_plugin in order
to avoid clashes with the public API. To avoid breaking the existing
projects, a compatibility wrapper function is enabled by default unless
QT_DISABLE_QT_ADD_PLUGIN_COMPATIBILITY is specified.
Fixes: QTBUG-82961
Change-Id: If5b564a8406c90434f1bdad0b8df76d3e6626b5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a negated feature config value like the following:
qt_feature_config("foo" QMAKE_PUBLIC_QT_CONFIG NEGATE)
If this feature was disabled, it would turn up in both,
enabled_features and disabled_features of module .pri files.
Also, QT_CONFIG would contain foo.
Expected however is that QT_CONFIG contains no-foo, and only
disabled_features contains foo.
Fix this by prepending a "no_" prefix to the value, similar to the
"no-" prefix in the qmake build. The qt_correct_config function was
adjusted to recognize "no_foo" and translate it to the qmakeish
"no-foo" config value.
Config values that start with "no_" but do not correspond to a feature
are left untouched. You can still have values like
"no_valley_too_deep" or "no_mountain_too_high".
Change-Id: I23d8b18c84e04ea6dfa25cc6ccd8f7e86211b144
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move QT6_ADD_RESOURCE to Qt6CoreMacros in order to avoid the extra
config file step.
Change-Id: Ib445ca35c648cf344ee8795de8bdddc0f0758972
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since there's no way to register callbacks or to store functions to be
called later in CMake, the only way to isolate the quick compiler
behavior for qt_add_resources() is to wrap it in a conditional check.
As soon as someone loads Qt6QmlMacros, the variable will set and the
functionality will be available.
Change-Id: I5fbdf2966e7dfdc734512a5b2b973e0ace9da5df
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Once we can require CMake 3.17 everywhere, we can remove the variable
set up from QtSeparateDebugInfo.cmake.
Change-Id: I91572583654054f5fa47ac1e41be23050a5a8c0b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In a non-prefix build, the module .pri files must end up in the
mkspecs/modules subdirectory of qtbase's build directory.
Change-Id: I241f4e274d31de7c1e3c2fa8e5e26fb8747f11c5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Implemented some necessary functionality to generate correct .pri
information, so that qmake can build modules.
Task-number: QTBUG-75666
Change-Id: I63281adfef3d01385928b1d8c4be0b32ac97c4d7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit also adds a qt_finalize_module function that is called for
every Qt module after all link dependencies have been added.
Change-Id: I489d188d05e368208a8a62828bb12fb395df54bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We don't want people accidentally installing tests into the
Qt prefix.
Change-Id: Ic99492559875f753897a83af162253cac846a8a5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The install prefix in such a case is the qtbase build dir,
and not the qt6 top-level build dir. This caused issues with
certain incorrect paths being generated, including a broken
qt-cmake-standalone-test script, as well as upon reconfiguration
determining that a non-prefix build should be installed.
The fix for a non-prefix build is to check explicitly for
the qtbase build dir. This works both for super and non-super
builds.
Task-number: QTBUG-83496
Change-Id: Ida2393176c4c81da767023ff48159afdedfb0a19
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of using CMAKE_INSTALL_RPATH to embed an absolute path
to prefix/libdir into all targets, use the more sophisticated aproach
that qmake does.
For certain targets (modules, plugins, tools) use relative rpaths.
Otherwise embed absolute paths (examples, regular binaries).
Installed tests currently have no rpaths.
On certain platforms rpaths are not used (Windows, Android,
iOS / uikit).
Frameworks, app bundles and shallow bundles should also be handled
correctly.
Additional rpaths can be provided via QT_EXTRA_RPATHS variable
(similar to the -R option that configure takes).
Automatic embedding can be disabled either via QT_FEATURE_rpath=OFF
or QT_DISABLE_RPATH=ON.
Note that installed examples are not relocatable at the moment (due
to always having an absolute path rpath), so this is a missing feature
compared to qmake. This is due to missing information on where
examples will be installed, so a relative rpath can not be computed.
By default a Qt installation is relocatable, so there is no need to
pass -DQT_EXTRA_RPATHS=. like Coin used to do with qmake e.g. -R .
Relative rpaths will have the appropriate 'relative base' prefixed
to them (e.g $ORIGIN on linux and @loader_path on darwin platforms).
There is currently no support for other platforms that might have a
different 'relative base' than the ones mentioned above.
Any extra rpaths are saved to BuildInternalsExtra which are re-used
when building other repositories.
configurejson2cmake modified to include correct conditions for the
rpath feature.
It's very likely that we will need a new qt_add_internal_app()
function for gui apps that are to be installed to prefix/bin.
For example for Assistant from qttools. Currently such apps
use qt_add_executable().
The distinction is necessary to make sure that relative rpaths are
embedded into apps, but not executables (which tests are part of).
Amends e835a6853b
Task-number: QTBUG-83497
Change-Id: I3510f63c0a59489741116cc8ec3ef6a0a7704f25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The CMAKE_INSTALL_RPATH cache var had the PATH type, which made
CMake transform the value into an absolute path, getting rid of the
$ORIGIN value.
Fix that by changing the cache var type to STRING.
Also clean up the all-caps commands, add a usage example and print
the install RPATH.
Change-Id: Ibf40cfde4283369ddfcf52609143799cc8e47d68
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is required to support QtVirtualKeyboard's third party OpenWnn
library.
Change-Id: I64b6a2b6b6b0259bea5aa249a8c901def31f916c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a find_package() in a try_compile project doesn't find a package,
and we then link against a non-existent target, the configuration
failure of the compile test also fails the configuration of the
project.
To avoid that, separate library targets from non-targets, and make sure
to only link against the targets if they exist.
pro2cmake now outputs modified compile test project code which iterates
over targets and non-target libraries, and links against them when
needed.
Change-Id: Ib0f4b5f07af13929c42d01a661df2cabdf9b926b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In Coin when provisioning for Android, we download and configure
the OpenSSL package, but don't actually build it. This means that
find_package(OpenSSL) can find the headers, but not the library,
and thus the package is marked as not found.
Previously the openssl_headers feature used the result of finding
the OpenSSL package, which led to it being disabled in the above
described Android case.
Introduce 2 new find scripts FindWrapOpenSSL and
FindWrapOpenSSLHeaders. FindWrapOpenSSLHeaders wraps FindOpenSSL,
and checks if the headers were found, regardless of the OpenSSL_FOUND
value, which can be used for implementing the openssl_headers feature.
FindWrapOpenSSL uses FindWrapOpenSSLHeaders, and simply wraps the
OpenSSL target if available.
The find scripts also have to set CMAKE_FIND_ROOT_PATH for Android.
Otherwise when someone passes in an OPENSSL_ROOT_DIR, its value will
always be prepended to the Android sysroot, causing the package not
to be found.
Adjust the mapping in helper.py to use the targets created by these
find scripts. This also replaces the openssl/nolink target.
Adjust the projects and tests to use the new target names.
Adjust the compile tests for dtls and oscp to use the
WrapOpenSSLHeaders target, so that the features can be enabled even
if the library is dlopen-ed (like on Android).
Task-number: QTBUG-83371
Change-Id: I738600e5aafef47a57e1db070be40116ca8ab995
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The previous approach didn't work for prefix builds. While a target
might be excluded from building via EXCLUDE_FROM_ALL property, when
calling make install it would still try to install the target and
thus fail.
It's not possible to modify an install() command in a post-processing
step, so we switch the semantics around.
pro2cmake will now write a
qt_exclude_tool_directories_from_default_target() call before adding
subdirectories. This will set an internal variable with a list
of the given subdirectories, which is checked by qt_add_executable.
If the current source dir matches one of the given subdirectories,
the EXCLUDE_FROM_ALL property is set both for the target and the
qt_install() command.
This should fix the failing Android prefix builds of qttools.
Amends 622894f96e
Change-Id: Ia19323a2ef72a3fb9cb752ad2d4f2742269d11c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
list(JOIN) removes a layer of escaping, which force doubling up
on the backslashes. Instead use string(REPLACE) thus making the
escaping a bit saner.
Change-Id: Ie3daf0112dd09fbcbaf8798552949470952611c9
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On Android, check_language() reports that the languages are supported,
but enable_language fails afterwards.
On Linux it causes issues with the PCH. The PCH file might contain
a Clang pragma, even though the C++ compiler is GCC. Presumably due
to finding a Clang Objective-C compiler.
Change-Id: I1b4c54459772c089e7f6350872c87af52ad72a37
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
configurejson2cmake handles the 'static' and 'shared' features now.
There's no need to special-case it anymore.
Change-Id: I956e9f46ebe022b1da862e986ec05f41e1e804e0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
configurejson2cmake handles the 'rpath' feature now. There's no need
to special-case it anymore.
Change-Id: I9aa9c9acdeb586de09d8a8d269909f8acb02e40a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add -Wno-error=format-overflow. This is similar to what is done in
qt_common.prf, however we don't turn the warning off completely.
For now at least.
Change-Id: I93c20064759dea43309c3a17de4d733ede9ca2cb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Starting with CMake 3.18, there is PCH support for darwin multi-arch
builds, like iOS simulator_and_device builds.
Also enable PCH for Objective-C++ files when the support is there.
To enable PCH for Objective-C++, we need to do enable the OBJCXX
language as well, but conditionally, because on non-darwin platforms
the language is probably not available.
Introduce the qt_enable_cmake_languages() macro which is called
automatically by qt_build_repo_begin().
Change-Id: I0e7f44be6577ac54ce940470036626409920e272
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some library entries in configure.json have a test entry.
An example is assimp in qtquick3d.
qmake tries to find the library via the sources section, and then tries
to compile the test found in config.tests/assimp/assimp.pro while
automagically passing it the include and link flags it found for assimp.
We didn't handle that in CMake, and now we kind of do.
configurejson2cmake will now create a corresponding
qt_config_compile_test call where it will pass a list of packages and
libraries to find and link against.
pro2cmake will in turn generate new code for the standalone
config.test project. This code will iterate over packages that need to
be found (like WrapAssimp) and then link against a list of passed-in
targets.
In this way the config.test/assimp/main.cpp file can successfully
use assimp code (due to propagated include headers).
qt_config_compile_test is augmented to take a new PACKAGES argument,
with an example as follows
PACKAGES PACKAGE Foo 6 COMPONENTS Bar
PACKAGE Baz REQUIRED
The arguments will be parsed and passed to the try_compile project,
to call find_package() on them.
We also need to pass the C/C++ standard values to the try_compile
project, as well as other try_compile specific flags, like the
toolchain, as given by qt_get_platform_try_compile_vars().
Change-Id: I4a3f76c75309c70c78e580b80114b33870b2cf79
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
