BlackBerry OS does not allow for explicitly controlling the locale through the
"LANG" environment variable. Locale is controlled by the underlying PPS
Service instead.
Change-Id: I22154e39f81a9467ad7fdb90a042396390398b1b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Mehdi Fekari <mfekari@blackberry.com>
qt_nameprep is tested by tst_qurlinternal. We just need to be sure that
QUrl handles them correctly.
Change-Id: Ic563004870d2cf2fa7a31ce49fff7280d5ffb5f3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
warning C4804: '<=' : unsafe use of type 'bool' in operation
Remove outer loop and replace ugly ROW_NAME macro by
inline function.
Change-Id: Id7e4ef047adaf8017b8c21621d19c151993cc6dd
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
warning C4267: 'argument' : conversion from 'size_t' to ' int', possible
loss of data.
Change-Id: I79af7497420d468b5bc7c48c9ae21b86117519a9
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Edge case: a > that should have been >=. Without it, we never ran the
rest of the IDN nameprepping.
Change-Id: I2276d660de3a70d0c561bb18816820d9a0f47e77
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
RFC 3454 says about prohibited characters (section 2, "Preparation
Overview"):
3) Prohibit -- Check for any characters that are not allowed in the
output. If any are found, return an error. This is described in
section 5.
In other words, we mustn't simply strip the output of prohibited
characters. We must generate an error if they are present. We do that by
clearing the data.
We already had tests for prohibited output, but they were
indistinguishable from being stripped. So instead add some extra
characters so that we can tell whether the label was cleared.
Change-Id: I2d95217c27be5e2d54deed0036cb009e3b7f4886
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
When uc > 0xffff (non-BMP character) and l == 1 (replacement is in the
BMP), we must use QString::replace so the correct number of characters
is replaced.
There's one case testing this in tst_qurlinternal, but it is being
obscured by another bug (false positive).
Change-Id: I32388dd5bef32d4d6804aeeec4904bd5f563e9b9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
If the case folding operation results in either expansion or reduction
of the string, we need to adapt. Reduction happens most often when a
non-BMP character is case-folded to a character in the BMP (example:
mathematical signs at U+1D400-1D7FF). Expansion happens in the rare
case of symbols containing words, like U+2121 ℡ (this is part of the
unit test), and one common case: the German sharp S (ß) is expanded to
"ss".
Change-Id: I1bdbdc908b958a89bf30e4bb648d65dfdd9097f8
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Because tests are usually run as root on some setups, it does not
make sense to test for the right permissions of a readonly file.
Change-Id: I484f88722d3a9ce7123edc0fb57acae528fa194e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update the test code to match the current Qt idiom for finding test data (and
fix it on QNX).
Change-Id: I63e7c97b717722e4e6859a12f329d56b26584ce6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
To ensure the correct event order, only set the geometry() once the window is
actually made visible.
We also need to post the expose event even for child windows (i.e.,
windows which have a parent).
Change-Id: Ief80778bc3202352bd194e4b3ba655f619350b1a
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
On Mac it's expected that some elements are
filtered out of the a11y hierarchy.
We do this with the shouldBeIgnored function.
The problem is that we would ignore some objects
and then return them in the child attribute function.
This is inconsistent and leads to voice over not working.
For example having a plain QWidget with other widgets as
children would cut off all of these widgets, since the
plain QWidget would be ignored.
Change-Id: I5f6c26b272e5ca57d59c1ed1ef47e9a2b1181295
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
In some cases the event coordinates reported by evdev are in different
orientation compared to the primary orientation of the platform window.
This commit adds plugin parameter rotate=[90, 180, 270] to rotate the
normalized coordinate system before reporting the touch event.
Change-Id: Ic830a2d259f9d3c5fb63b80afb795d8b400c2ece
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
So far we stayed completely silent if the user forgot to deploy all
plugins, or deployed them in the wrong way.
Change-Id: Idd776c4b4a2ddffd5da08985e5925248c97e0270
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Add font combo to top level via layout and position top level
instead of the (child) font combo.
Change-Id: I0f754c37c009d1ed83615b800d6f2467e858c047
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Previously, normalized positions with either of coordinates equal to
1.0 would be reported outside the screen / window geometry, which would
cause hit test to fail.
Change-Id: Ia5e083bd52254c7e05143eedf930be3bcba7a412
Initial-patch-by: Aaron Kennedy <aaron.kennedy@jolla.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
The raw coordinates were not reported by the evdevtouch plugin.
Change-Id: Ia06129edd771b12cc9f6a97dc678b545d226af70
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
QOpenGLTextureGlyphCache::restoreTextureData restores FBO which
was binded before restoreTextureData call. More specifically,
it restores QOpenGLContextPrivate's current_fbo member. This works
if FBO was binded by QOpenGLFramebufferObject but not if FBO was
binded using glBindFramebufferObject and rendering done via
QOpenGLPaintDevice.
This patch fixes it by querying current FBO using
GL_FRAMEBUFFER_BINDING query and restoring it.
Change-Id: Ia97a21e62566dc39a5191b66d3ca0e3ad0845ce1
Reviewed-by: Valery Volgutov <valery.volgutov@lge.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
As shown in QTBUG-24345, QBitArray will exhibit invalid reads when
initialised with a negative size and run under valgrind.
QVector and QVarLengthArray both cause a crash if initialised with a
negative size.
This patch enforces sizes greater than or equal to 0 with asserts and
existing if statements, and hence impose no performance penalty for
release builds.
Task-number: QTBUG-24345
Task-number: QTBUG-30037
Change-Id: I9a969f6016e0a59904a60bbfe9e5360e6f523b87
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
all private headers are created by syncqt (and are thus in the source
dir), so we can simply override the normal (build dir based) paths
instead of extending them.
Change-Id: I9c1f3344c401b481b3f3d2295515f1aabffaa9a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
these builds usually assume all headers in the qtbase build (== source
== install) dir, so the path for adding our pre-generated per-module
include paths needs to be triggered explicitly.
Change-Id: I57ec441d58cdf8186907ee6c36dce08daa206c49
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
MinGW has a longstanding problem of providing the MSVC intrinsics that
every Windows developer expects to be there. Other projects have run
into those problems.
So instead just use the GCC inline assembly.
Change-Id: I5651f97f9a4dfbf98ebbf063f91f221eab80b224
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
All other main platform plugins leave the count parameter at its
default value (1). For improved compatibility, make the Windows plugin
do the same, instead of hardcoding the value to 0.
Task-number: QTBUG-31285
Change-Id: Id87fd559d13f42391be3200d5ff2393285f0d2a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
It's no more on QtWidgets.
Task-number: QTBUG-31508
Change-Id: Iba117a4103c2b32173816a4ecb5faa187f169b32
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The TXT record is particular because each RR can contain multiple text
strings. So we need to join each RR's texts too.
To make it easy, I've made everything be QStrings.
Change-Id: Ia0506544b913585e7be860c81077cff8e0dab547
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The DNS protocol changes the order of the RRs in each reply it sends,
in an effort to balance the load in servers. For most tests, to ensure
that we get always the same result, we simply sort it back.
For MX and SRV, we can't sort because we also need to test that
QDnsLookup sorted correctly according to priority. So instead allow
that test to have multiple alternatives.
Change-Id: I5c119f907b31789de5c9cf2471cc82ecd140d06f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Resolving compilation issues encountered when dynamically linking to OpenSSL release 0.9.8 (no letter)
Adding #ifdefs to address OpenSSL version issues, correcting q_sk_push declaration
Conflicting code in qsslsocket_openssl.cpp not present in stable branch.
Task-number: QTBUG-30615
Change-Id: I4b86ca4303343cca5d440ab9821b275028cc5a72
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
In the situation that the screenSize EGLFS hook had been defined, but
not the physicalScreenSize, the uninitialized contents of
fb_var_screeninfo vinfo would be used to calculate the fall-back
physical screen size. Since this value is undefined, devices like the
Raspberry Pi would end unable to render DPI dependent fonts.
Change-Id: Ic9f67c1c646cc7b328b695b76a84d78577fefcd8
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This prevents EGLFS from getting stuck after
exposing the first frame, by constantly generating
new Expose and GeometryChange events which are
synchronously processed.
Change-Id: Id3b09821ea31e9c1ddab7c520e782a4e42844a08
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
