Connecting to an IPv4 mapped IPv6 address (e.g. ::FFFF:127.0.0.1)
requires the IPV6_V6ONLY socket option to be cleared.
This was causing tst_qtcpserver::ipv6ServerMapped autotest to fail.
The same change is not required on MacOS X - the test passes there.
Task-number: QTBUG-24351
Change-Id: I6c08b19f0daa12765da2d44792ffb17299322695
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I70c324e6fcfd2bba3ab44837c5ce2c007de8896f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
and run the configure checks with the values
Change-Id: Ie8e0072c686c6a7dce1d02e25a9c1abce4679d34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QAccessibleInterface::relations() replaces both relatedTo() and
some of the RelationFlags that navigate() handled before.
Change-Id: I4b9d2c28ba3d753efe7cc9bfa0ad68bed3ee02fd
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
We want to drop support for old revisions in Qt 5.
This commit brings the QDBusAdaptorConnector meta-object in sync with
current moc output.
The QtDBus implementation was assuming that the relaySlot() slot
would be created at index methodOffset() in the meta-object, but
since revision 4 that's no longer the case (signals always come
first). Made the code more robust by actually querying the
meta-object what the index is.
Change-Id: Ie0791680cc2e9e5fb1472c4462c391f92ea22ea6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The inputSignature and outputSignature fields were not being used
anymore.
All tests still pass.
Change-Id: Icbc8fdcd5179a2b1b4843d58b90af925f6bef133
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no reason for them not to be, and it's a prerequisite
for making these functions constexpr.
Change-Id: I03c9965147b51014c7af60a4c2d7f25a3f6e21a7
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
qtypeinfo.h is still included from qglobal.h, and defines QTypeInfo
as well as all the specializations for built-in and default Qt types.
Change-Id: I24116174de288a730cbb7aa2f80d346d2b2f9408
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Many (most?) strings written aren't in fact UTF-8, and we can check at
compile-time which are and which aren't, so don't hard-code fromUtf8()
but use the much more efficient QStringLiteral() where applicable.
This is low-hanging fruit. This patch only optimises US-ASCII string
literals, not those that are latin-1 or even UTF-8, because that would
require more extensive changes to the original fixString() function.
Likewise, there are also other calls to QString::fromUtf8() being
generated (e.g. in the pixmap code) that could benefit from being
turned into QStringLiterals, but their code paths are more involved
than those this patch fixes.
This patch at least suffices in turning all the setObjectName()
arguments into QStringLiterals, which was the main goal.
The autotest baseline has been updated with the new expected results.
Change-Id: Ic1ef67f500f9ff92d36164d515f4e004ef2a10bc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Use the standard g++ specs, just override the compiler name
Change-Id: I4adacd7204d3880155bdfc3405e20f322ad593ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
CreateNamedPipe supports the flag PIPE_REJECT_REMOTE_CLIENTS since
Windows Vista. On earlier Windows versions the system call would fail
with ERROR_INVALID_PARAMETER.
This does not open a security hole on Windows XP as there can be only
one pipe instance.
Change-Id: I5a1c7fdf756678009857317c7b563c884afeef2c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When creating a deprecated header, create the directory it will be
located in, if it does not yet exist.
Change-Id: Id0ac7327e7dfe5b3e34b431c7bc3844b72251a3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is replaced by parent(), child() and relations()
Change-Id: Iabff6ec56176a1ca8465d6480860f6e0174fd134
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
LSB doesn't allow syscalls, so fall back to the normal _unix
implementation
Change-Id: I8aba6147da8b46e3f85b0454cf9aca219811c9fe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Because of an upcoming change to the meta-object data format, the
ability to extract parameter types from a signature will be needed by
meta-object builders (such as QMetaObjectBuilder) soon.
Change-Id: I1f21b2be41761a5db2f1a05976fad29eb3aebb03
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to drop support for old revisions in Qt 5.
This commit brings the QSignalEventGenerator meta-object in sync with
current moc output.
Change-Id: Id5f4954b08cf49169850bd77543b2a7ab8274c18
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The signature() method will soon be replaced by a function that
returns a QByteArray rather than a pointer, and calling it will be
more expensive than calling isValid(). Plus, isValid() looks nicer.
Change-Id: I6844988c84dcadf876fc86bc71c8b310a21f88de
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This function provides a proper way of determining whether a function
returned by QMetaObject::method() is valid. (Checking whether
signature() returns a 0 pointer, which e.g. testlib does, is not an
ideal API -- especially given that signature() will soon be removed
and replaced by a function that returns a QByteArray.)
Change-Id: I644f476b09904925f2042945f5d0ad744482b682
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
There is no "str" member in QConstByteArrayData, it should be "ba".
Change-Id: Ife76460e9332733480c1ceded21e78388656092d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
It's sufficient to call it once per invokeMethod.
Change-Id: I1db826027eca87c799f216d65e27c801a23e64e2
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
generateFunctions() shouldn't (and doesn't) modify the list of
functions, so the list should be passed by const reference.
Change-Id: If5ff810e5623e734816c3089eb8b3fd4f54f2345
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
moc mostly operates on QByteArrays. When an actual const char * is
needed, it should be explicit.
Change-Id: I0b3e262830128306688f4512a4b59ce8966c2579
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is not C.
Furthermore, the function-level i was already shadowed in several
places by "for (int i = 0; ..." blocks later in the function.
Change-Id: Ic1777f78d9838bc2921d68337be05de454bbeabe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We no longer support universal ppc/x86 builds.
Change-Id: I8c4a1d087d02da1ad80d91a7a04147b37e81d74f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The logic here was wrong: test if the
target linker supports -rpath-link, and then set
it for both host and target via mkspecs/qmodule.pri.
Change-Id: Ie4da7ed2e06e784f9edb65a27290913ab838a8c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This fixes a "cast from 'void*' to 'int' loses precision" error and adds
a missing argument to qWarning.
Change-Id: I38544c4e317a3f6d1ecf26ebb3e35c66b1878d24
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
IBM's POWER and the PowerPC architecture have been merged into a single
ISA, the Power ISA (see http://www.power.org). Use this unified name in
Qt.
Change-Id: Ia41492b0031d890843e43c5f7ecd1e60c65bb75b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This flag was used by QWS to set or not set the composition mode
when filling the background. E.g. this was used by 'transparent'
windows to set the alpha bits. QPA didn't have this enabled in 4.8,
the code paths are gone in Qt5 and it is the responsibility of the
QPlatformBackingStore to initialize the alpha bits properly.
Change-Id: I4011d842b718d6a40b19922b5f75c597e63079c8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This is motivated by visiting a customer that re-implemented the
::winId method and returned WId(0) that resulted in a crash. Currently
there is only a comment inside the implementation of the ::winId
default implementation. Add a note to the API documentation, add
a Q_ASSERT to check if our assumption holds true.
Change-Id: I8607a4efc4f561f7849c976cd2454f6fbcb20eaa
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The helper functions contained QSKIP macros which do not also skip their
parent function. These QSKIP function were removed and replaced with a
return success value.
Change-Id: I533f57842fc95beaeb1fcde5235678e9807db056
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest seems to be caught in an event loop preventing further
correct signalling. Mark test function skipped with QSKIP.
Task-number: QTBUG-24374
Change-Id: Ic943a33b71fa87d0873278cb7b7b134c22602be3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For shadow builds where "make install" had not been run, the
tst_QLocale::emptyCtor test function would fail to find its helper
application because QFINDTESTDATA was not searching for it in the build
directory due to the test not instantiating QCoreApplication.
This commit fixes the test by instantiating a QCoreApplication using the
QTEST_MAIN macro, which also allows some special case code for Windows
CE to be removed.
Change-Id: Ic81d4699da2538c24b36b3d6bd52c4a02ad417f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Prior to this commit, a benchmark test could report 0..n passes and 0..m
fails or skips, where n is the number of accumulation iterations used to
collect benchmark data and m is the number of times the test function
was invoked. Depending on the type of benchmark measurer being used,
this could result in a very large volume of test output and inconsistent
pass, fail and skip counts between test runs.
This commit changes the behaviour so that each benchmark test reports
one pass, fail or skip, regardless of the number of iterations used to
collect benchmark data.
This commit also prevents benchmark data being reported in the test
output if the benchmark test failed or skipped, as any benchmark data is
of dubious value in such cases.
The latter change in behaviour requires a minor modification to the
badxml selftest, which now tests quoting of literal strings in xml test
output for both passing and failing benchmarks.
Finally, this commit also adds a new selftest specifically for verifying
correct behaviour for benchmarks that fail or skip.
Task-number: QTBUG-24313
Change-Id: I3426dc659a7511b62fd183a031c7235bc753f497
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Made test depend on subprogram to make sure it was there when
test ran.
- install signalbug subprogram
Change-Id: Ie0a19e52d131adcd17c97b263389aecffb81520e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Prior to this commit, when an unexpected pass occurred the test output
showed the message "XPASS : tst_foo::function() 'expr' returned FALSE",
where the problem was actually that the expression evaluated to true
when it was expected to be false.
This commit changes the output to make it clear that the expression
evaluated to true unexpectedly.
Task-number: QTBUG-22118
Change-Id: Id22c178073d3b75789675ca37a8ef019029b1f91
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
cb8445f032 removes an implied +1 from
document line height so we need to remove the compensating -1 from
image ascent/descent for image heights to be correct..
Change-Id: I310c06bcf1ce2eefef42c2828faa0eb435ad71cf
Reviewed-by: Yann Bodson <yann.bodson@nokia.com>
Reduce the thread and iteration counts to make this test execute faster.
This change reduces the runtime to 14 seconds (from 5 minutes, 38
seconds).
Change-Id: Id5ea056cfd33022da5a06809f0598a5cdb02b27b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
History of the development before the import:
ssh://codereview.qt-project.org/playground/mimetypes.git
Mimetype definitions come from shared-mime-info where available (UNIX systems),
loaded using a mmap'ed binary cache generated by update-mime-database.
As a fallback if no cache is found, we parse the raw XML files otherwise.
This makes the MIME type support fast and with very low memory usage on UNIX,
and it makes it easy to use on Windows (no dependency on shared-mime-info,
Qt even includes a freedesktop.xml file to use if none are found on the system).
Change-Id: I27b05008216ff936dc463bd80d3893422bfb940e
Reviewed-by: Richard J. Moore <rich@kde.org>
this was inconsistent with how qmake itself works, and was actually
wreaking havoc.
Change-Id: I5aa83cc88ffe7141cc0c31b03b76c48274f1ebdb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The visible property along with show/hideEvent tracks the
windows visibility from the application perspective and is
really a request. The exposeEvent() along with the isExposed()
accessor is used to notify the application of the actual
state of the window in the windowing system.
Change-Id: I7f5b7ed74a168e34aaa21ce0ae9042ddfb0bf6d8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Just implements what the note states (and removes the private function)
Change-Id: I9a6fd5134460712accf09ba01691df8b9b1f5d0d
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QEasingCurve internally holds the spline data in a
QVector<QPointF>. For the return from cubicBezierSpline(),
the vector is transformed into a QList<QPointF>.
This involves copying, and into an inefficient (for QPointF
payloads) container at that, so deprecate cubicBezierSpline()
in favour of a new toCubicSpline() returning the QVector
directly.
Change-Id: Ie4827fe7c6e289ad97a0b09772e47298779c76ca
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
