We must add all test data to resources.
Change-Id: I1b18415cd53a27bd23e51ac6b738d3ed94162ac9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
This adds the testdata to a qrc to make them available on Android.
There are still some failures which might be actual errors, and which
will be addressed separately.
Change-Id: I1bdcfb2c6676134ca52388d49a1b2d25cf2813f9
Reviewed-by: BogDan Vatra <bogdan@kde.org>
QWidget is polished when show() is called, so unless you do this
first, QWidget::font() will return a default constructed QFont,
and not necessarily the default specified in the platform theme.
Comparing this to QPainter::font() later, which has been resolved
against the platform theme font, and not the default constructed
font, you can get a mismatch and a false test failure. This
happened on Android.
Change-Id: I41ef5b10879bbd4bb8ef8d52ecaccf5e8e894075
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Fixed a few instances of files that should be deployed to the
file system. The way we do this on Android is via qrc. We also
need a special case for the resources/test.txt, because
QFINDTESTDATA will find this in qrc, but that's not the one
we are looking for.
Change-Id: I7097e8b7795b3a8fd483adad090208f295478412
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The testdata needs to be in a qrc to be available on Android.
Note that a single test will still fail. Since this requires
a platform-independent fix, it will be committed separately.
Change-Id: Ib2438a3298d81d77b7f4f240ef045aa0500d8382
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We must add all test data to resources. Write output data into a writable location.
Change-Id: I5a1c212f6108abf2a82288a2c84cfb31eda5e101
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
QVersionNumber will gain a small-version-number optimization, which
stores sequences of less than 4 (32bit) or 8 (64bit) 8-bit signed
segments inside the class instead of a QVector. Make sure the tests
cover those cases, too.
Change-Id: If1d875c75d284908756b305f767a7218cab5226f
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The change 35bc3dc45a moved some padding out
of QTextureGlyphCache into the font engines directly, however this was not
done for the DirectWrite font engine so it caused a buffer overrun.
Task-number: QTBUG-41782
Change-Id: I4e643159036f06c5edd8a742dc6694d517a47826
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
There's a change in Qt 5.4.0 that makes Qt compile with its own set of
D-Bus headers, which means QT_CFLAGS_DBUS may be empty. Thus, we can't
compile or link if we're using the actual libdbus-1 API to build the
test.
This commit makes these unit tests use the same dynamic loading
mechanism.
Change-Id: I56b2a7320086ef88793f6552cb54ca6224010451
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The error of "Not connected".
This incidentally solves a crash when QDBusServer().lastError() is
called but libdbus-1 couldn't be found.
Change-Id: Id93f447d00c0aa6660d4528c4bbce5998d9186a8
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
On the unit test side, everything is sequential: we first ask for the
connection, verify that it is connected, then ask the remote side via
the session bus if it is connected. Unfortunately, the remote site may
handle things in a different order: it may handle the incoming function
call to "isConnected" before doing accept(2) on the listening socket.
So, instead, make the local side block until the connection is received
on the other side. On the remote, we don't block, instead we use the
feature of delayed replies.
Change-Id: Ie386938b8b39dd94a9d7e5913668125fb4a3c7da
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Skip the tests that require building and deploying an external
command line application, since that's not how we do things on
Android, and it's really not very relevant for that platform.
Change-Id: I2c1985687e25fb0cf124b1d57c8ba60e37d2ff96
Reviewed-by: BogDan Vatra <bogdan@kde.org>
On Android the POSIX implementation of QCollator is used, and
this does not support setting other locales than the default.
Change-Id: I25d23949341fc555e8be4f6836ae68cc8813cc46
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Include test data in qrc so it can be found on Android.
Change-Id: Iaca8422120f1ef842aafeb0cc209cb9fdd70f05f
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Bundle test data in qrc on Android. Extract it, as the tests
expect to find it in the file system.
Change-Id: I251eca3c23141a608b1cbac5ee0b7164c068f9b4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The failures will be printed in red color.
Use -f param to stop on fail.
Change-Id: Ife58f9264a9ac859d739842c6d1359acde807ce7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The orientation is unsigned short, read it as such. In
JPEG-files created by Ricoh/Pentax cameras, the data is saved in
Motorola format. Reading the wrong data size will produce invalid
values when converting the byte order.
Change-Id: I8f7c5dc5bfc10c02e090d3654aaefa047229a962
Task-number: QTBUG-43563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Linux gracefully allows us to do that and treat the v6 socket as if it
were v4. Other OS (notably OS X) aren't so forgiving.
Change-Id: I13dd3274be2a4b13e8b1eef93cbc2dd17b648f96
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead of leaking the QLockFile instance, which causes
leak-checkers to emit false positives, simply call exit(),
which doesn't run the destructors, yet doesn't lead to
leak-checker warnings.
Change-Id: Ia61010671e5218ae412e2bcf873e66255a2c5a99
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So we can get the output when running with QDBUS_DEBUG=1.
Change-Id: I6a6b8e0d82727c522914fb90a7ce594c86307d8f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Instead of killing them outright (and note that terminate() doesn't work
on Windows), ask them nicely to exit on their own. This way, if we run
them in valgrind, valgrind gets a chance to print the leak check output
and summary.
Change-Id: Ib6cc8d4560ff0bf255f94980eb220e97592c00f0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The ROUND function for PostgreSQL only accept NUMERIC field as argument
Change-Id: I0c3753bfe4167cd47158e21b407cca8771816104
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Added support on QDateTime::fromString to read correctly dates on ISO
format with Time zone designators at format [+-]HH
Change-Id: Ied5c3b7950aee3d0879af0e05398081395c18df5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This patch adds correct timezone support in PSQL plugin. Prior to this
patch, no timezone support was provided, so only the following case
worked :
* using local time in both client application and postgresql server
* datetime were using second precision
This patch tries to take care that postgresql has two different
datatypes for date time, respectively :
* timestamp with time zone
* timestamp without time zone
Both are internally stored as UTC values, but are not parsed the same.
* timestamp with time zone assumes that there is a time zone
information and will parse date time accordingly, and then, convert
into UTC before storing them
* timestamp without time zone assumes that there is no time zone
information and will silently ignore any, unless the datetime is
explicitly specified as having a time zone, in case it will convert
it into UTC before storing it
Both are retrieved as local time values, with the following difference
* timestamp with time zone includes the timezone information
(2014-02-12 10:20:12+0100 for example)
* timestamp without time zone does not include it
The patch does the following :
* parse the date retrieved by postgresql server using QDateTime
functions, which work correctly
* always convert the date to UTC before giving it to postgresql
* force time zone so that timezone information is taken into account
by postgresql
* also adds the milliseconds when storing QDateTime values
The following configurations are tested to work :
* client and server using same timezone, timestamp with or without tz
* client and server using different timezone, timestamp with tz
The following configuration will *not* work :
* client and server using different timezones, timestamp without tz
Because data will be converted to local time by the postgresql server,
so when returned it will be different from what had been serialized.
Prior to this patch, it gave the illusion to work because since TZ
information was lost, time was stored as local time from postgresql.
Lots of inconsistencies occurred, though, in case client tz changes...
I don't expect this to be an issue since having different TZ in server
and client and *not* handling this is a broken setup anyway.
Almost based on changes proposed by julien.blanc@nmc-company.fr
[ChangeLog][QtSql] Added timezone support for datetime fields in PSQL
Task-number: QTBUG-36211
Change-Id: I5650a5ef60cb3f14f0ab619825612831c7e90c12
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
We want to use "localhost" if the server's address is "any", as some OS
can't send datagrams to "any" (e.g., OS X and FreeBSD).
Change-Id: I1004bc2282e7f930cdb7ed394aa9f4b5a1cfcf82
Reviewed-by: Richard J. Moore <rich@kde.org>
On my Mac Mini, port 5000 is in use, which means the broadcasting test
fails.
Change-Id: Ifb0883263e277f388342430349ea7315d42f324a
Reviewed-by: Richard J. Moore <rich@kde.org>
It was unconditional. Someone forgot to check for IPv6 support before
skipping IPv6 tests.
Change-Id: I7b11528ad02560f0db9defde3c64f76f48a6c1f8
Reviewed-by: Richard J. Moore <rich@kde.org>
QUdpSocket doesn't support binding to QHostAddress::Any and then joining
an IPv4 multicat group since QHostAddress::Any is really an IPv6 socket
with v6only = false. The test did check this case, but failed to ignore
the warning.
Change-Id: I62d782408319a6e566e0ff1a6081b706ac1f669c
Reviewed-by: Richard J. Moore <rich@kde.org>
With IPv6, you cannot bind to a multicast address. You need to bind to a
local address only. The previous tests either checked this or didn't
check the result of bind().
Change-Id: Ief70887d8988fc1bc4394cf6ff34b5d560e5748e
Reviewed-by: Richard J. Moore <rich@kde.org>
Sending 100*8 packets of each type of message is WAY overkill. That's a
stress test without limiting. My Linux system starts reporting EAGAIN on
the socket, so reduce the amount of data sent.
Change-Id: I153f44cf3b91d37526dac580b400114cc80b1769
Reviewed-by: Richard J. Moore <rich@kde.org>
IPv6 has no such thing, so don't try to bind to an IPv6 address to send
broadcasts (even though that works) and it's a poor idea to bind to IPv6
to receive broadcasts. Moreover, skip any IPv6 network addresses
(broadcast() is invalid).
Change-Id: I2829b042c000158565adfd92db682f37d67dacae
Reviewed-by: Richard J. Moore <rich@kde.org>
If you don't have /etc/lsb-release, you'd get
sh: line 0: [: =: unary operator expected
Change-Id: Idb5c79f799879e4d32cd640ef74fb388227f831e
Reviewed-by: Richard J. Moore <rich@kde.org>
It doesn't make sense because there is no command to ask the proxy
server to join a multicast group. At best, we could write a datagram via
proxy without joining, but we definitely can't receive.
Change-Id: Icc6b54572a053fb7821dfca1f4111f2046ff8686
Reviewed-by: Richard J. Moore <rich@kde.org>
This is a temporary measure while the Qt CI system is updated to have
the correct D-Bus configuration. Once it is fixed, this commit should be
reverted, so that we don't run into the situation in which the tests
aren't getting run on some configurations and we never know about it.
Change-Id: I7192d4d95a60dcb63acfa6cc90bfdc58592b0664
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The /home path doesn't exist on Android, so it doesn't work as
a non-writable current dir. Instead we use /data on Android.
Change-Id: Ib779f60822da1bef421a16a00c1030245a8c5b90
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The qtlogging.ini file needs to be detectable by QFINDTESTDATA,
so we put it in a qrc file on Android.
Change-Id: I5fb0217098c56f2b2e99ab8d1642c4a7904b18d1
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test requires building a console application first, deploying
this as part of the APK and then being able to execute the
bundled file from the main application. Since IPC is a limited
use case on Android, we just skip this test instead.
Change-Id: Ie68e495ff64b69e7027924291a411b5de0e2da76
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Test requires that tst_qiodevice.cpp is available on file system,
but since we're not able to deploy directly to the file system
on Android and since we want to actually test file system access,
we bundle it in qrc and copy it out during initialization.
Change-Id: Ida2b5bf6f1dcd43bc740a2b9380352bab5eb6c62
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Some of the tests expect QDir::homePath() and QDir::currentPath()
to be different, so we just set the current path to something
other than QDir::homePath().
Change-Id: Ib048d323f4745369821765230b995a73b8a97145
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test may not be possible on Android, since the file system
can be mounted with noatime or relatime which means read access
will not be registered.
Change-Id: I40f587e1a1f131ee06f0e3700e908ccaa19c83ce
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Since there's no way to deploy files directly to the file file
system on Android, we put them in a qrc file and extract them
on startup.
Change-Id: I6a42aa5e0372bfd9fb2f7ccfea964c9c3c2e45d8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test requires that the resources are also available
in the file system. Since it's not possible to deploy directly
to the file system using Android, we extract the files on
startup instead.
Change-Id: I1d1fe7d62c4c618a89713e3a7d1903e42bfb10b8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
There's no way to install files automatically into the file
system on Android, so to test QDir on the file system, we have
to bundle the files in qrc and then copy them into the file system
on startup. This adds some complexity, but at least it will detect
regressions.
We also need to make sure the current directory is the same as
the data path, since the test assumes this, and /usr/ does not
exist on Android, so we have to use a different path to find the
root path.
Change-Id: I18d79b5ed99a0afff573beb30c61745c403f8991
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This will arbitrarily fail at certain points. Adjusting the
timeouts helps, but it's very unpredictable, so it's better
to do what we do on Windows and just expect-fail the results
that we get.
Change-Id: Ie6033c73539c2dd69115b06096919e173f097367
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Add all test data to resources.
Change-Id: Id42a4c033b75409f65cb4d56ebf1161336b93832
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: Ic12f8fce9afb965aff32e7141516c8d223e64491
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: I7f9e7650156b174b7c16270d86b78e9408dff254
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add test data to resources.
Change-Id: Ib8a5688e7caab8434b8f0676f53a2a79ec94b264
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Wait for the subprocess to print "ready" before assuming that it is
ready to receive calls. waitForStarted() will return as soon as the
child is running, but it may not have registered on D-Bus yet.
This also solves the synchronization problem more elegantly than how
tst_qdbusmarshall.cpp was trying to do it.
Change-Id: I548dfba2677cc5a34ba50f4310c4d5baa98093b2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The executables are not in the same dir as on Unix, so we need to use
QFINDTESTDATA to find them. The DESTDIR setting prevents qmake from
placing the executables in a "debug/" subdir.
Change-Id: I1d6d10e6f6f109f55fd9809dcf83da0386f38772
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Rohan was right in e88f9a92b7 to stabilize
the test and reset the state, but killing the subprocess is overkill.
All we need is to reset the state in both applications, which includes
disconnecting and reconnecting to the peer, to discard any sent but not
yet received messages.
Change-Id: Ie01392e6e63bd70ef8345217d3fc641ed63c7aba
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QDBusServer::address() will return an empty QString, which caused the
tests to fail later with no apparent reason.
Change-Id: I86f448dfc67a6cdb27ecda2d490f335766cfaf4f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This allows the tests to be run on Windows too by using TCP socket
connections instead of requiring Unix sockets. The tests shouldn't have
hardcoded the path, which came from QDBusServer anyway. Now the tests
simply defer to QDBusServer.
This is a slight behavior change for Windows, but not one that should
matter since anyone who was using the default constructor resulted in a
QDBusServer that failed to listen.
[ChangeLog][QtDBus][QDBusServer] Fixed a bug that made QDBusServer's
default constructor try to bind to a Unix socket on non-Unix systems.
Now QDBusServer will attempt to bind to a TCP socket instead.
Change-Id: I2a126019671c2d90257e739ed3aff7938d1fe946
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
No need to loop twice to add the "native" entries, since they are added
by the helper function anyway.
Change-Id: I9caabc6fc4973a90b483840815769b1351947a89
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Put also processing of control activation into initial timer check for possibly
pending mouse release event.
[ChangeLog][QtWidgets][QScrollBar] Fixed a bug where the valueChanged() signal
was emitted twice if a connected slot took too much time.
Task-number: QTBUG-42871
Change-Id: I7bad5279ef84463a033b55256d241d4445374081
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Add a functions to dump out texts character by character and
as code.
Task-number: QTBUG-43191
Change-Id: I1ac17f2485563f909b71bb1fbd1fd595d1d94223
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QStandardPaths::writableLocation() is documented to return the
empty string if no matching writable location can be determined.
This is the case for e.g. FontsLocation and ApplicationsLocation on
Android. We need to still accept this as a valid response.
Change-Id: I2824e9dcfd41b1c24dbf3896b7ae9b5260e9accd
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The test expects all the files to reside in the file system,
both for loading the runtime resources and for comparisons.
Since we can't deploy directly to the file system on Android,
we go via qrc and extract the files on startup instead.
Change-Id: I17ff8985cb17dbfc45f0fb692ca46558bb5c5cdc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This fixes a regression introduced with
c09e9f71173a698670d6c728291ee24f53d50800 which caused the lineedit to
clear the whole text when an invalid character was entered into a lineedit
with an echo mode that was not Normal and a validator was set.
Now if undo() is called directly then it will still clear the text as it
is considered to be called as a user. Whereas the validation will take
care of the invalid entry by using internalUndo() as before which avoids
the clearing of the entire text.
Task-number: QTBUG-29318
Change-Id: I5ff5777a75ab864de2217441b5f518f50646bd8f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since those are unpredictable, there's little we can match, besides the
"0x" for the QThread pointer. For the PID, at least we can compare it to
the value from QProcess.
Change-Id: I89420306863b95c82be761baabd733a7f17eba5e
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This test fails if the environment has the variable set.
Change-Id: Ibd54ff3e6e22a885341898889088ac56e84282b1
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Our theory for the failure of framePosition() not having the expected
value after setFramePosition towards the end of the test is that we try
to call setFramePosition() while the getting-back-from-fullscreen-to-normal
window animation is still running, at which point the compositor may
just choose to ignore our move request.
Similarly to when going fullscreen, also wait when coming back from it.
Change-Id: Icfc92f277d96dccdfad772c4aac252b2a20c6196
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Add the source widget to the texture list (may be null for custom
compositor implementations that add textures not belonging to actual
widgets). This allows us to do proper checks with the
dirtyRenderToTextureWidgets list.
As a result paint events are only sent to a QOpenGLWidget if (1) there
was an update() for it or (2) it was actually marked dirty. (2) was
previously behaving differently: the widget got a paint event when
anything in the window has changed. This is fine for naive animating
OpenGL code but less ideal for QGraphicsView.
Bool properties like stacksOnTop are now stored in a flags value to
prevent future explosion of texture list fields and parameters.
Task-number: QTBUG-43178
Change-Id: I48cbcf93df72ac682c9b5d64982a8b648fe21ef3
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The Qt bug tracker URL changes as part of the qt.io transition
Change-Id: Icb4ab198943b93639b5e3a8d99262303785c6459
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The test still fails sporadically at a new place, so this adds some
debug information when it fails to may help us identify what is going
wrong.
Change-Id: Ife0f171299ef7e800a2d808602e76ca2f3885964
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The calculateTabWidth() can trigger shaping of the item, which can
cause the layout data to be reallocated, so we need to update the
local pointers to it, like we do when we explicitly invoke the
shaper.
[ChangeLog][Text] Fixed problems with text layout when using custom
tab stops.
Task-number: QTBUG-43126
Change-Id: Ifaeeeb4bfb1a55e6638b12b444f53d2679d3d1e6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Calling QOpenGL2GradientCache::getBuffer() will generate the texture the
first time, calling glBindTexture in the process. We did this without
first ensuring that the right texture unit was active, resulting in the
generated gradient texture binding onto the glyph cache mask unit.
We now provide a specialization of bindTexture for a QGradient, which
ensures that the right unit is active before calling getBuffer().
Unfortunately we have no way of knowing if the result of getBuffer()
was a texture that was already bound, or if we need to bind the result,
which means we have to do an unconditional bindTexture of the resulting
texture ID. This means double-bind for the initial texture generation,
but this was already an issue in the original code.
Task-number: QTBUG-43039
Task-number: QTBUG-41244
Change-Id: I20c9b795c8c14f8d58be2b60a284c5a060705ec0
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The part of the test that verifies that setFramePosition moves the window
successfully appears to be very unreliable in the CI system. The "tested"
frame position is calculated to be at (40, 40) relative to the top left
of the available screen geometry, which can be non-zero due to task bars
and similar system ui elements. However that position appears to be
unreliable in the sense that the window manager doesn't seem to always
respect that. So instead let's try placing the window (by frame position)
in the center of the screen instead.
Change-Id: I96fe6c37e748fc18262632b5effe5a9e90dc0028
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Don't check for absolute counts of resize events but just check if we
were resized. Also use QTest::qWaitForWindowExposed instead of QTRY_COMPARE
and checking for QEvent::Expose.
Change-Id: Ie383493a8ce6d88cad50bd6375d432ad1578449c
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
When setting a left corner widget on a QMenuBar, the first
action rectangle is offset by its width and thus the width
should not be added to the size hint. Use QSize::expandedTo()
instead.
Task-number: QTBUG-36010
Change-Id: I660e3facbd0aeb5fb84fac8923db3e0c7998309d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
The sizeHintChanged() signal from the column and row delegates need to be
connected to the doItemsLayout() slot so that the view is updated when the
size hint changes.
Additionally doDelayedItemsLayout() is called to ensure that this is
up-to-date as the size hints may have changed when the new delegate was
set on the row or column.
Change-Id: I458293f05ce9ef40a03bdbcab1a6e7a10f648c89
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Kevin Puetz <PuetzKevinA@JohnDeere.com>
Most of QtDBus already needs very little from libdus-1, so create an
extra header containing the minimum API we actually need.
One large advantage of this solution is that now QtDBus can always be
enabled, even if the system doesn't have libdbus-1 installed. This is
interesting on OS X, where libdbus-1 is often installed by Homebrew or
MacPorts, which may include extra libraries we don't want in our
packaging.
Change-Id: I1b397121ec12eeca333ef778cf8e1c7b64d6b223
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
sizeHint() did it exactly like this, but minimumSizeHint() didn't,
which made it too small. Didn't affect the actual size in most cases
since the vertical size policy is fixed, so sizeHint() is called instead.
But when writing a subclass, if one re-implements sizeHint() by
calling the QLineEdit's minimumSizeHint(), it would then be wrong,
when text margins are used.
Change-Id: I29ae8dcab00842b3b5ca534cdb250efc0b496f45
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The enum was made public in f84b00c6d2, but this
makes it follow the convention to camel case acronyms too before it's too late
to change it.
Change-Id: Ibb81e9221cb73fe0502d0a26f2d73512dd142f08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a popup is opened it grabs the input, but the leave event to the other
windows needs to be sent.
Remove the popupEnterLeave test as it did not test any code. The Popup
never gets any enter or leave events so it will succeed always succeed
Task-number: QTBUG-36862
Change-Id: I625c616eeb74b5168af7b751485e2a9a53b76cd3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
- Fix prototype for glinfo() for Qt 4
- Add more event types and object type flags to event filter.
Change-Id: Ia4160b40486d054e860a339e7b5c9c28695330ae
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This makes it follow the coding style, which says to camel case acronyms too,
and makes it consistent with the rest of the class.
Change-Id: I4a1b21de1815530e476fc5aa8a0d41c724fc8021
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: hjk <hjk121@nokiamail.com>
The code in 4696e9dbaa was incorrect. It is perfectly valid to call
these methods with row=-1 column=1 parent=some_index, this is exactly
what happens in QListView and QTableView. Child row/column is only for
trees.
Move the coordinate mapping from QSortFilterProxyModel into a new
mapDropCoordinatesToSource internal method, used by QAbstractProxyModel.
Task-number: QTBUG-39549
Change-Id: I3312210473d84b639cbe4c01f70ea36437db3e91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Somehow, it doesn't shrink with btrfs, even if you write 1 MB of non-
null data. This does not seem to be a bug in QStorageInfo. strace
confirms that there is a second statvfs call happening.
Change-Id: I9ed99d27d25e191916278e6b8faeae132469fc63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The testcase always returns the expected result, independently of the
QEventLoop::ExcludeSocketNotifiers flag to processEvents.
In Qt4 the same test uses an intermediate QEventLoop and already runs
it before the QEventLoop::ExcludeSocketNotifiers:
QEventLoop loop;
// allow the TCP/IP stack time to loopback the data,
// so our socket is ready to read
QTimer::singleShot(200, &loop, SLOT(quit()));
loop.exec(QEventLoop::ExcludeSocketNotifiers);
This fixes and improves the test by connecting, processing and
checking the bytesWritten signal for the pending connection socket.
Change-Id: I1b1d2b7b83910c87ba3fe48e29ac9fd585ac62ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch is cherry-picked from
c38f1f19b8 and
d29d727d72
Task-number: QTBUG-32435
Change-Id: I6dbbb668b96737a5791bc688949a00bc09f1357f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This patch is cherry-picked from
63ae74f365 and
07f234d2a8
Task-number: QTBUG-42528
Change-Id: I5f86679e62a4be48ce25afa5a4987a2b6678a357
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
