QtTBUG-22642 added about 25 new values for the Qt::MouseButton Enum.
This change adds documentation for the new values. Note that the
special value 'Qt::AllButtons' is documented at the top (next to
the other special value, 'Qt::NoButton'.) The new internal value
'Qt::MaxMouseButton' is listed as a \omitvalue.
Task Number: QTBUG-22642
Change-Id: Iaec623754156fff8a2c73e357fef82e1fe36354b
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Fixes non-namespaced builds.
Change-Id: I0ec3c29f58042313dfa864f15c2b2d47914cdedb
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The word 'momentaneously' does not exist.
Change-Id: I3d2201d5b7b3a01af5989bb1c3fcd55110d5482c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Till Adam <till@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Change-Id: I14ca7f8a377bca39004defc96d69d62c151181f5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Jeremy Katz <jeremy.katz@nokia.com>
QGlobalNetworkProxy (a singleton) had two phase construction, with
the second phase being called from QNetworkProxy's constructor.
This isn't necessary, and has been reported as causing deadlocks.
Although constructing socket engine handlers has side effects
(they add themselves to a list on construction and remove themselves
on destruction), this appears to be safe. The socket engine handlers
are only used while holding the list mutex, and any socket engines
created don't have any reference to the factory that created them.
With the new version, it is possible that two instances of
QHttpSocketEngineHandler and QSocks5SocketEngineHandler exist
temporarily if a Q_GLOBAL_STATIC initialisation race occurs.
This appears safe, because the loser of the race deletes its
handlers, which remove themselves from the global list as above.
Task-number: QTBUG-13088
Change-Id: I8cf520da717d8ab7d862ab89c6de13aea6d60ac3
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QNetworkAccessManager was ignoring the supplied credentials, although
webkit seems to support these urls at a higher level.
Following the behaviour of browsers:
We use supplied credentials if authentication is required.
We add supplied credentials to the authentication cache.
We emit authenticationRequired signal if the credentials were wrong.
We do not use previously cached credentials for that url
Synchronous http requests fail, if the credentials were wrong.
Task-number: QTBUG-18107
Change-Id: If46e8eab1511ba8a0f4bbe0d4efaabc4df0b8ab4
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In certain circumstances, this could cause the request to time out
(and repeatedly send bad authentication credentials to the server)
instead of failing with AuthenticationRequiredError.
Change-Id: Iff66b32f1d7268f21fd77b6620aae4b5d49d857f
Reviewed-by: Richard J. Moore <rich@kde.org>
This feature was implemented in 4.8, but documentation was not
updated at the time.
Task-number: QTBUG-18181
Change-Id: I657d7ab7aaf43b73b7bf8fd1cb76086522cf5c2b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Non-mutating functions can (potentially) be constexpr.
On top of that, they often make for more readable code.
Change-Id: I3547327cf5a7162737353a864a1025d0d02ccc2f
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Marked a bunch of tests insignificant, and skipped one crashing test
case in QApplication test, as that couldn't be made to pass simply by
marking the test insignificant.
Once the underlying issues are fixed, the tests need to be re-enabled.
Task-number: QTBUG-24203
Change-Id: I9aea4fa207d307793445efdcaead72219fbf6c4f
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
It has been superseeded by QPlatformTheme.
Task-number: QTBUG-24204
Change-Id: I8c4131c7bfd8201e747984d772ed8042610192b8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
A number of network autotests are unstable in Windows, so don't
generate check target for them as is done for mac.
Once the tests are acceptably stable, this needs to be reverted.
Change-Id: I18262e28ce40eba541aecf3cfb651bff34698ead
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The "check" target always depended on debug-check on projects that
explicitly loaded the testcase.prf, even if Qt was configured with
-release parameter. This obviously caused build failure. Changed the
testcase.prf to check which configuration is preferred using
CONFIG(debug, debug|release) like is done with similar cases in other
.prf files.
Task-number: QTBUG-24332
Change-Id: Ib5140b106e99efe51932bdd5a48914786de23230
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Add 'using namespace' to moc code as was the case in 4.8.
Change-Id: I26cba9ad74bf05eecc5205714c32c3176695e3b4
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove config.tests/mac/defaultarch.test, but do the same type of
default arch detection, only using the qmake binary instead of compiling
an empty file. Qt 5 will only support 10.6 and up, which means we
only support i386 and x86_64 now.
Change-Id: I24949ac803b965c523b1ee45cf769e266dcde134
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The first IP address on the machine might not be a usable one.
Changed the QLineEdit to a QComboBox, and populated it with
all IP addresses of the machine, along with the machine names
if they are configured.
Task-number: QTBUG-13121
Change-Id: I7c443f5ce6efb0d0b525c5abad1671d3dcbba33c
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Change-Id: I14706abb8441c153f738563cb1a46205fdb2dae6
QWindow::visible() did not follow the API guidelines.
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The default JSON file is /etc/user-dirs.json, but may be
overridden by setting PATH_CONFIG_HOME to the file to be used.
This provides functionality similar to the XDG based QStandardPaths,
but uses a JSON file to define paths, rather than the XDG A=B
format. Values other than HomeLocation and TempLocation may be
specified by removing the "Location" postfix, converting to upper
case, and separating words with _. Values are independent. For example,
CacheLocation does not depend on GenericCacheLocation.
Variables specified as ${[^{]*} will be replaced with environment
variables.
Change-Id: I374f5e6bae498dbfa9cb4ecadf915b05fb91fc34
Reviewed-by: David Faure <faure@kde.org>
This is similar to the focusColors() failures in QTBUG-23686.
Task-number: QTBUG-23686
Change-Id: I1f01a4e41e61a7a664309be34cfa4fe916a92b15
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test fails intermittently, and at random locations.
Task-number: QTBUG-24322
Change-Id: Ied6dd4d1593066debc0fb48c6ca2a17a1f4d51b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
All of these tests currently hang.
Task-number: QTBUG-24321
Change-Id: I7664b57f6539d4c03008701da66e193019a4440a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
tst_QColorDialog::native_activeModalWidget() hangs, so skip this test.
tst_QColorDialog::task247349_alpha() fails, so XFAIL this failure.
Task-number: QTBUG-24320
Change-Id: Ie4d69e07063e9a648ec4fa3337274143a52ea3e3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The first block of tst_QApplication::quitOnLastWindowClosed() hangs
on Mac OS X, so skip that block for now.
tst_QApplication::testDeleteLAter() both hangs and fails on Mac OS X,
so skip the test and XFAIL the failure.
Task-number: QTBUG-24318
Task-number: QTBUG-24319
Change-Id: Ice11292d84e63215f1bb9e03f3ef369943d1d887
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The xarch.test and crc.test are not run by configure, so remove them
along with the related CFG_MACH_XARCH and QT_NAMESPACE_MAC_CRC configure
variables.
The kEventClassQt variable in qt_mac_p.h is also unused now, so remove
it as well.
Change-Id: I596ab9b493ce3164b6a4d40e8942479efc91b60d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The default constructor for QSettings does not set NoAccess status, even
if the organization domain, organization name, and application name are
empty. Instead of trying to fix QSettings, keep the existing behavior,
and test for it.
Failures from tst_QSettings no longer need to be ignored, so
mac:CONFIG+=insignificant_test has been removed from the .pro file.
Task-number: QTBUG-22745
Change-Id: Ic9f8b6821c483c217e1ef2ece704be2da169e340
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
- Move palette() from deprecated QtWidgets/QGuiPlatformPlugin
to QtGui/QPlatformTheme, Make it return a const * since
QPalette does not have isNull().
- Initialize QGuiApplication::palette() and
QApplication::systemPalette() from it.
- Do not initialize QPalette from QGuiApplication::palette()
unless app_pal is non-null (default to Qt::black if it is 0).
This avoids initialization order crashes/recursions in the
QPA plugin. Streamline initialization function.
- Remove styleName(), systemIconThemeName() and iconSearchPaths()
from QGuiPlatformPlugin and re-add them as
QPlatformTheme::themeHint().
- Remove styleHint() from QGuiPlatformPlugin, add it to
QPlatformTheme::themeHint().
- Add UNIX themes with factory function (Generic,
KDE, Gnome), taking it from Qt 4.8 code (stripping the
KDE 3 code).
- Implement Windows palettes.
Task-number: QTBUG-24204
Change-Id: Ie27ec035df4f84c42deaffc4816b2e53ce705462
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Because fork()/vfork() on QNX are not supported on multithreaded applications,
QProcess had been disabled on this platform. The corresponding code has now
been replaced with functions that wrap around spawn().
Change-Id: I46091b7d41f322a5cad07d17893aa929c84941ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The = means that a single, static, compat plugin replaces the list of
keys (eg. from previously checked static plugins or from dynamic plugins).
Using += prevents this undesirable behaviour.
Change-Id: I3a40752c08dddbfe81444ca9c782b633e9742ab9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- made subdir test depend on echo
- remove SRCDIR and changed to use TESTDATA and QFINDTESTDATA
- added waitForFinish() to handle slow networks
- removed core module header from echo subprogram and replaced
with needed header only
- Added ipv6 skip to connectToIPV6Address() if not available
- Added check QT_BUILD_INTERNAL and skip tests if backend
not available
- Skip permission tests if run as root
- Removed win32 debug and release directory locations so that
application is in known location relative to test data
Change-Id: I58c3c2fca3cd2fee72fdb81d016bb4fd7fe08ac2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- no longer needed after test that used it was removed
Change-Id: I63fc8a9db07f9250507becb9bf6c2aefe0fdc254
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The QTextStream paragraph that is removed referred to something that is
incorrect. This was confirmed for Windows, Linux and Mac.
Change-Id: Ibac8f82482f2060308b5b8485d6da228bdf52fe6
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
(cherry picked from commit 80cebfde10cf34dcc0777c24f1b3ff37cad20181)
Neither rendering with outline nor fetchMetricsOnly requires the
rendering from FreeType so we don't need to render them or cache
it. It should speed up recalcAdvances() quite a lot.
Change-Id: I0f623cb4f79da2edf6e9c9634a2f22fb0c66823c
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QSqlDatabase::database() is documented to be thread-safe and when the
driver is queried for the numericalPrecisionPolicy set then it can
comprimise the thread-safety.
Since the driver itself (if one is set) will be queried for the
numericalPrecisionPolicy when numericalPrecisionPolicy() is called on
the QSqlDatabase then we can have it fallback to the default instead
rather than taking the driver's own setting.
Task-number: QTBUG-13423
(cherry picked from commit e7e9fca6c0cd1d0869029fc6e9d7605234ee5bb2)
Change-Id: Ie7e9fca6c0cd1d0869029fc6e9d7605234ee5bb2
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
When the filedialog was reshown the context menu for the header was not
in sync with the sections that were actually visible. This ensures that
it is in sync after the state of the header is restored.
Task-number: QTBUG-23271
Change-Id: Ia1546bf300d43a5822482f63de99eb52b674bf52
Reviewed-by: Zeno Albisser <zeno.albisser@nokia.com>
(cherry picked from commit 2e220e4603d6a0c21efee3a884be76e9f2d7ebb7)
Change-Id: Ib5a8513cc2d08adce49602b2590059b918b1ffda
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fixes non-namespaced builds.
Change-Id: Ie743fc57e7f208fdd50c61b08dc8a4b150de3930
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
C++11 supports user-defined string literals, which makes
the C++98-accepted literal string concatenation sequence
"foo"MACRO
illegal under C++11.
The solution is to add whitespace between the string
literal and the macro. For symmetry, this patch adds it
on both sides.
Change-Id: Ie0c698f610986c4d1b12dc2083489043b696936d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the use of QList<QPair<>> to a simple C array of xcb_keycode_t*s.
This is possible since the number of elements in the container is
statically known.
I have not measured speedup; this is just preventing premature pessimisation.
Change-Id: I8855fc8a4e7ee840d8b7497ec4166074da7d8ea8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
