The controls need to reflect the facts that e.g. maximized and fullscreen
can both be set at the same time, the same way a window can be minimized
and fullscreen.
Change-Id: I7f3e354a5efaefb9f51e6b1f24fa35980fe35899
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Makes operations like minimizing a window happen "behind the scenes"
because the window is hidden during the state change.
Change-Id: I01a00661e57f2dcfa6aef78ee0cfa36fbed1bb03
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Have a widget-based application that uses qTriangulate for fills
and QTriangulatingStroker (and optionally the dash stroke processor)
for strokes.
The resulting triangle (strip) set is visualized on a simple QPainter
canvas, offering the ability to zoom in and examine how the triangulator
behaves on a number of example shapes. It is also possible to step through
and only have the first N set of triangles drawn.
Change-Id: I3a27d86d4ea13a63dd4be0fe81dd4b5ed6e4fa75
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This change allows painting via QPainter onto a QOpenGLWindow, QOpenGLWidget
or QOpenGLFramebufferObject when an core profile context is in use. This is
important on macOS in particular, where compatibility profiles are not
available, and so the only way to use modern OpenGL is via a core profile
context.
Added core profile compatible shaders with moder GLSL keywords.
The paint engine binds a VAO and two VBOs from now on, whenever VAOs are
supported. Note that this changes behavior also for OpenGL 2.x context that
have VAO support via extensions.
The Lancelot test suite gains support for core profile contexts. This can
be triggered via -coreglbuffer in place of -glbuffer when manually inspecting
via 'lance', while tst_lancelot will automatically run core context-based tests
whenever supported.
Task-number: QTBUG-33535
Change-Id: I6323a7ea2aaa9e111651ebbffd3e40259c8e7a9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Sometimes it is desirable to use a new connection but keep already
entered user credentials for usability reasons. This is now possible by
clearing the connection cache (but keeping the authentication cache).
Change-Id: I2f5f64836ce19f81c8525701783a3da823dd468e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fix warning about unused variable printer in auto-test and redirects
output to qInfo() as intended.
Amends change a26435d65c.
Change-Id: Ia72a93267a54b9c4f9ef37fa058b95ef586ecc75
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change the main window to contain a QTabWidget and add a log widget
logging relevant events on the top level widgets for testing changes.
In the preview window, add new window flags of Qt 5 and output
geometry, margins and window state in addition.
Change-Id: Icec366223b6c163d58a69034687f3d9323a91533
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When a menu item's enabled state changes after
-[QCocoaMenuDelegate menuWillOpen:] is invoked, i.e.,
during or after QMenu::aboutToShow() is emitted, that
state change may not be taken into account. This is
because the automatic menu validation, upon which Qt
relies, is not made aware of any such change.
By calling -[NSMenu update] when syncing the QPA menu
item, we induce Cocoa to invoke -[QCocoaMenuDelegate
validateMenuItem:] and ensure that previously synced
items, whose state may have changed, will be properly
updated. This, however, has a small side effect, namely
that menu-holding items will also go through the automatic
menu enabling path and may appear disabled since, until
now, they were not properly configured. In order to solve
this, we set the action on those items as well, and make
sure that both of QCocoaMenuDelegate's relevant methods,
validateMenuItem: and itemFired:, properly process
menu-holding items.
Menurama manual test updated accordingly.
Change-Id: I62f955538b8be09b8494ea0ce87fca7910148d38
Task-number: QTBUG-56850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The existing cursor logic had a couple of issues:
- It made the faulty assumption that we could not use
the NSWindow invalidateCursorRectsForView API for
child NSViews.
- It used NSWindow invalidateCursorRectsForView and
NSView resetCursorRects. This API has been replaced
by the more general NSTrackingArea API.
- It did not implement falling back to the parent
window cursor if the current window has no cursor
set.
Document that QWindow cursors work the same way as
QWidget cursors in that a QWindow with no set cursor
will fall back to the parent window cursor.
Change the cocoa platform code to use NSTrackingArea
exclusively and implement NSView cursorUpdate which
sets the cursor. Handle immediate change on QWindow::
setCursor() manually.
Add QWindow::effectiveWindowCursor() and
applyEffectiveWindowCursor() which finds the correct
window cursor.
Add a manual test for the child window, child widget,
and QWidget::createWindowChild cases.
Task-number: QTBUG-33479
Task-number: QTBUG-52023
Change-Id: I0370e11bbadb2da95e8632e61be6228ec2cd5e9d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This leaves a clearer separation between the foreign-window and non-foreign
window use-cases, where a single QCococaWindow can only be in one mode,
which is determined in the constructor and doesn't change after that.
There are no source or binary compatibility guarantees for the QPA classes,
meaning the helper function in QPlatformNativeInterface can be removed.
Change-Id: I3232aedca1d98c49a8f54e16750832187f9dc69a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QSysInfo::WinVersion, QSysInfo::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::MacVersion,
QSysInfo::MacintoshVersion, and QSysInfo::macVersion() are now
deprecated.
QOperatingSystemVersion exists as a more flexible replacement.
Change-Id: Ib97d1bfb260f2595ba3c06ff8fd251c5de41cedc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to detect cases where the requested vsync combination was
not possible to fulfill.
Change-Id: Ie8f3665129f7a1ab7fcefb94b2298d54520b753a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The FPS is now calculated and output on the command line in a single
place. The animated fps counter has been replaced with a vertical line
which should make it easier to observe tearing issues when vsync is
disabled.
Change-Id: Id356fc1958c048d85aba48edfed59124454038d4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The animated FPS counter should be enough to observe smooth animations,
so we use the color of the window to visualize frame latency.
Change-Id: I1171a1c4bdc261ca8655771290c6735357821781
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QStorageInfo] Added QStorageInfo::subvolume(), which
returns the name of the subvolume of a volume that was mounted, if one
was detected. This is currently implemented only for btrfs on Linux.
Change-Id: Ib57b52598e2f452985e9fffd1459f3145d733ce5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
Use the correct method of QMetaEnum to convert enum values to names.
QMetaEnum::valueToKey() should be used, because it takes an enum value
as an argument, while QMetaEnum::key() takes an index of the enum value.
Change-Id: Ie895fcc935e8835e3d9c416ca34be8bfe82fd74e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Changes the --extrawindows option to --numwindows with a default of 3,
and layouts all windows in rows and columns so that they are all
exposed at startup.
Change-Id: I5e8d63a14b778bcddc2fee3bf7e78d6664532b5b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This manual test pretends to be a modest safeguard
against QMenu related regressions on macOS. It takes
a slightly different approach than the existing menus
manual test, tracking observed regressions instead of
providing extensive coverage (though this may change
in the future).
These regressions are listed as task numbers below,
most of them arising from the now infamous change,
09acf326db QCocoaMenu: Decouple NSMenuItem from NSMenu
So, from now on, please run this and the menus manual
tests and look for regressions every time you make a
change regarding QCocoaMenu and related. And, if you're
fixing a regression, add the regression example to the
Menurama manual test.
Task-number: QTBUG-52931
Task-number: QTBUG-53085
Task-number: QTBUG-53251
Task-number: QTBUG-54633
Task-number: QTBUG-54637
Task-number: QTBUG-54698
Task-number: QTBUG-55121
Change-Id: I276e916dcdf00f1a44faf64d87050bc3a037a3b5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
