Child QWindows (or in the case of QWindows embedded in native applications:
top level QWindows where the corresponding NSView is a child of another
view, so not being the contentView of its window), still need some of the
NSWindow notifications to e.g. update their exposed state when the window
becomes visible.
We make sure to send the notification to all QCococaWindow children of
the relevant NSWindow, and let each callback decide if it should only
apply to content views.
This fixes an issue where a QWindow would never be exposed if the window
was a child NSView and added to a NSWindow that was yet to be shown.
Change-Id: I7f7df8bc5f4ca3ac553a2c146f8c3229b197c059
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There's no need for us to walk our own ancestor chain to figure out which
cursor to set. AppKit will automatically call cursorUpdate: on the view
that would be the hitTest target of the current mouse position, and by
falling back to super when no cursor is set for the current view, we
automatically get the behavior that effectiveWindowCursor tried to solve.
In addition, it solves the case of applyEffectiveWindowCursor applying
the arrowCursor when no cursor was set, which would mean that if any
native parent view of our view _did_ have a cursor set, we would not
fall back to the native view's cursor, but instead override it with
the arrow cursor. Following the responder chain gives the correct
behavior in this case.
Unfortunately, due to rdar://34183708, if a subview of one of our
views uses the legacy cursorRect approach to cursor management, the
cursor will not be reset back to our cursor via cursorUpdate: when
leaving the child and entering the parent view (our view). Moving
our implementation over to the legacy API would solve this problem,
but just propagate it to native parent views of our views, which
could potentially use NSTrackingAreas, and would not have _their_
cursors re-set.
Change-Id: Id20cc03136f0b1d4b9120750fe63ddc455363aaf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Add view to contentView, to allow checking parent view interaction
- Render via requestUpdate instead of manual timer
- Add two windows to check subview interaction
Change-Id: Ib028e62f585d45e42c0429e69ea6f45c8a90fe54
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Change c12072c685 fixed a problem
where tab labels would overlap with the icons if the tab became
too small to contain the text. But it did not properly account
for the full area occupied by the icon, because the horizontal
padding is hardcoded to 4 in the mac style, whereas in the
common style (where the icon is drawn) it uses the pixel metric
for this.
In addition, the change only allocated space on the left side,
causing the label to no longer be centered.
Task-number: QTBUG-61235
Change-Id: Ieec4f7044584361f92045addbc8bbd81bd5c9fc7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Calling -[NSMenu update] every time we add a new item can result in
a quadratic behavior since the function itself will iterate over all
the items in the menu. We solve this by using a 0-timer which will
trigger the call to update the next time the event loop spins.
Menurama manual test updated.
Change-Id: Ic155d364515cc93eb81b1c8085c8e44c93799954
Task-number: QTBUG-62396
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
It was working on Linux because _GNU_SOURCE gets us POSIX.1-2008
compatibility, but not on macOS or the BSDs. There, we were still stuck
to full second precision.
This commit uses the template trick introduced by the futimes code
(which itself was inspired by commit 2fb42eb4af
in QtNetwork). Also note how it adds support for birth time, if the
system's stat struct has that information.
Tested to work on MacOS and FreeBSD. The manual filetest produces:
Name: .
Path: . (/usr/home/tjmaciei/src/qt/qt5)
Size: 1536 Type: Directory
Attrs: readable writable executable hidden nativepath
Mode: drwxr-xr-x
Owner: tjmaciei (1001) Group: tjmaciei (1001)
Access: 2017-07-13T20:03:47.916
Birth: 2017-07-13T20:03:47.916
Change: 2017-07-13T20:04:41.648
Modified: 2017-07-13T20:04:41.648
Linux will require support for statx(2).
Change-Id: I8d96dea9955d4c749b99fffd14cd97d7a8c6d45d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Commit 32a94e54 changed the API of the QPS engine (PaintCommands
class). Update the usage accordingly.
Change-Id: Ide57609e636dad0aa434d1049b600b72f731bc30
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Covers non-document mode, tab icon, and adds a more
useable interface. Some parts are still missing, like
tab orientation and long tab titles.
Task-number: QTBUG-61092
Change-Id: Idbda84f513e3ff7f87fa04ae4476b11bd8bb6bf2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fix regression introduced by 175f33ed8. 'expanding' property set to true
was ignored when QStyle::styleHint() returned Qt::AlignRight for
SH_TabBar_Alignment.
When we calculate tabs geometry, we put an empty tab at the front and
back and set its expansive attribute depending on tab alignment AND
'expanding' property.
Task-number: QTBUG-61480
Change-Id: I6a1827ae8a3f2c6bee5124c18c7f2b1c0a7862f3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Change-Id: Ia0eddcb385207ada8c3df59d49ff1de27a2aeb71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In FileDialogPanel::options(), QFileDialog::DontUseCustomDirectoryIcons
was set when the "Don't use custom directory icons" box wasn't checked.
Change-Id: I6e9d9b41cf91f4abcc98c02bed44675908a8391d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We have been noticing several menu popup sizing issues
in the presence of multiple, heterogenous displays.
Most remarkably, we'd often pick the primary display's
geometry when computing the menu's size hint. This results
in usability issues if the primary display is smaller than
the display onto which the menu popup is being displayed.
This manual test covers menu bar, context and push button
menus. Torn-off menus are also enabled. We turn off the use
of native menu bars to cover a few more cases.
Change-Id: I29658ebdc56e41aa1bf99d06d96aed6bfb5461b3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
For Android, Windows and xcb. Verified on Win10 with NVIDIA, Win10
with AMD, Android with Tegra K1, Android aarch64 with Tegra X1, and
Linux aarch64 with Tegra X1 (Jetson TX1, L4T).
Introduce QPA-based Vulkan library loader, core function resolver, and
instance creation support. In addition to creating a new VkInstance,
adopting an existing one from an external engine is supported as well.
The WSI specifics are hidden in the platform plugins. Vulkan-capable
windows use the new surface type VulkanSurface and are associated with
a QVulkanInstance.
On Windows VULKAN_SDK is picked up automatically so finding vulkan.h
needs no additional manual steps once the LunarG SDK is installed.
[ChangeLog][QtGui] Added support for rendering to QWindow via the Vulkan
graphics API.
Task-number: QTBUG-55981
Change-Id: I50fa92d313fa440e0cc73939c6d7510ca317fbc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The controls need to reflect the facts that e.g. maximized and fullscreen
can both be set at the same time, the same way a window can be minimized
and fullscreen.
Change-Id: I7f3e354a5efaefb9f51e6b1f24fa35980fe35899
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Makes operations like minimizing a window happen "behind the scenes"
because the window is hidden during the state change.
Change-Id: I01a00661e57f2dcfa6aef78ee0cfa36fbed1bb03
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Have a widget-based application that uses qTriangulate for fills
and QTriangulatingStroker (and optionally the dash stroke processor)
for strokes.
The resulting triangle (strip) set is visualized on a simple QPainter
canvas, offering the ability to zoom in and examine how the triangulator
behaves on a number of example shapes. It is also possible to step through
and only have the first N set of triangles drawn.
Change-Id: I3a27d86d4ea13a63dd4be0fe81dd4b5ed6e4fa75
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This change allows painting via QPainter onto a QOpenGLWindow, QOpenGLWidget
or QOpenGLFramebufferObject when an core profile context is in use. This is
important on macOS in particular, where compatibility profiles are not
available, and so the only way to use modern OpenGL is via a core profile
context.
Added core profile compatible shaders with moder GLSL keywords.
The paint engine binds a VAO and two VBOs from now on, whenever VAOs are
supported. Note that this changes behavior also for OpenGL 2.x context that
have VAO support via extensions.
The Lancelot test suite gains support for core profile contexts. This can
be triggered via -coreglbuffer in place of -glbuffer when manually inspecting
via 'lance', while tst_lancelot will automatically run core context-based tests
whenever supported.
Task-number: QTBUG-33535
Change-Id: I6323a7ea2aaa9e111651ebbffd3e40259c8e7a9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Sometimes it is desirable to use a new connection but keep already
entered user credentials for usability reasons. This is now possible by
clearing the connection cache (but keeping the authentication cache).
Change-Id: I2f5f64836ce19f81c8525701783a3da823dd468e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fix warning about unused variable printer in auto-test and redirects
output to qInfo() as intended.
Amends change a26435d65c.
Change-Id: Ia72a93267a54b9c4f9ef37fa058b95ef586ecc75
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change the main window to contain a QTabWidget and add a log widget
logging relevant events on the top level widgets for testing changes.
In the preview window, add new window flags of Qt 5 and output
geometry, margins and window state in addition.
Change-Id: Icec366223b6c163d58a69034687f3d9323a91533
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When a menu item's enabled state changes after
-[QCocoaMenuDelegate menuWillOpen:] is invoked, i.e.,
during or after QMenu::aboutToShow() is emitted, that
state change may not be taken into account. This is
because the automatic menu validation, upon which Qt
relies, is not made aware of any such change.
By calling -[NSMenu update] when syncing the QPA menu
item, we induce Cocoa to invoke -[QCocoaMenuDelegate
validateMenuItem:] and ensure that previously synced
items, whose state may have changed, will be properly
updated. This, however, has a small side effect, namely
that menu-holding items will also go through the automatic
menu enabling path and may appear disabled since, until
now, they were not properly configured. In order to solve
this, we set the action on those items as well, and make
sure that both of QCocoaMenuDelegate's relevant methods,
validateMenuItem: and itemFired:, properly process
menu-holding items.
Menurama manual test updated accordingly.
Change-Id: I62f955538b8be09b8494ea0ce87fca7910148d38
Task-number: QTBUG-56850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The existing cursor logic had a couple of issues:
- It made the faulty assumption that we could not use
the NSWindow invalidateCursorRectsForView API for
child NSViews.
- It used NSWindow invalidateCursorRectsForView and
NSView resetCursorRects. This API has been replaced
by the more general NSTrackingArea API.
- It did not implement falling back to the parent
window cursor if the current window has no cursor
set.
Document that QWindow cursors work the same way as
QWidget cursors in that a QWindow with no set cursor
will fall back to the parent window cursor.
Change the cocoa platform code to use NSTrackingArea
exclusively and implement NSView cursorUpdate which
sets the cursor. Handle immediate change on QWindow::
setCursor() manually.
Add QWindow::effectiveWindowCursor() and
applyEffectiveWindowCursor() which finds the correct
window cursor.
Add a manual test for the child window, child widget,
and QWidget::createWindowChild cases.
Task-number: QTBUG-33479
Task-number: QTBUG-52023
Change-Id: I0370e11bbadb2da95e8632e61be6228ec2cd5e9d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This leaves a clearer separation between the foreign-window and non-foreign
window use-cases, where a single QCococaWindow can only be in one mode,
which is determined in the constructor and doesn't change after that.
There are no source or binary compatibility guarantees for the QPA classes,
meaning the helper function in QPlatformNativeInterface can be removed.
Change-Id: I3232aedca1d98c49a8f54e16750832187f9dc69a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QSysInfo::WinVersion, QSysInfo::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::MacVersion,
QSysInfo::MacintoshVersion, and QSysInfo::macVersion() are now
deprecated.
QOperatingSystemVersion exists as a more flexible replacement.
Change-Id: Ib97d1bfb260f2595ba3c06ff8fd251c5de41cedc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to detect cases where the requested vsync combination was
not possible to fulfill.
Change-Id: Ie8f3665129f7a1ab7fcefb94b2298d54520b753a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The FPS is now calculated and output on the command line in a single
place. The animated fps counter has been replaced with a vertical line
which should make it easier to observe tearing issues when vsync is
disabled.
Change-Id: Id356fc1958c048d85aba48edfed59124454038d4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The animated FPS counter should be enough to observe smooth animations,
so we use the color of the window to visualize frame latency.
Change-Id: I1171a1c4bdc261ca8655771290c6735357821781
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QStorageInfo] Added QStorageInfo::subvolume(), which
returns the name of the subvolume of a volume that was mounted, if one
was detected. This is currently implemented only for btrfs on Linux.
Change-Id: Ib57b52598e2f452985e9fffd1459f3145d733ce5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
Use the correct method of QMetaEnum to convert enum values to names.
QMetaEnum::valueToKey() should be used, because it takes an enum value
as an argument, while QMetaEnum::key() takes an index of the enum value.
Change-Id: Ie895fcc935e8835e3d9c416ca34be8bfe82fd74e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Changes the --extrawindows option to --numwindows with a default of 3,
and layouts all windows in rows and columns so that they are all
exposed at startup.
Change-Id: I5e8d63a14b778bcddc2fee3bf7e78d6664532b5b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This manual test pretends to be a modest safeguard
against QMenu related regressions on macOS. It takes
a slightly different approach than the existing menus
manual test, tracking observed regressions instead of
providing extensive coverage (though this may change
in the future).
These regressions are listed as task numbers below,
most of them arising from the now infamous change,
09acf326db QCocoaMenu: Decouple NSMenuItem from NSMenu
So, from now on, please run this and the menus manual
tests and look for regressions every time you make a
change regarding QCocoaMenu and related. And, if you're
fixing a regression, add the regression example to the
Menurama manual test.
Task-number: QTBUG-52931
Task-number: QTBUG-53085
Task-number: QTBUG-53251
Task-number: QTBUG-54633
Task-number: QTBUG-54637
Task-number: QTBUG-54698
Task-number: QTBUG-55121
Change-Id: I276e916dcdf00f1a44faf64d87050bc3a037a3b5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Change QOpenGLTextureBlitter to be a public API, as it was originally intended.
There are now significant external uses outside qtbase (C++ compositor examples
in QtWayland), and the API is considered proven enough.
[ChangeLog][QtGui] QOpenGLTextureBlitter, a utility class to draw textured quads,
has been made public.
Change-Id: If7a2c94e1494195e2aa375d214932fa7b4c78321
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Add a test for embedding Qt windows into foreign windows.
Complements the existing "foreignwindows" test (which embeds
foreign windows into Qt).
The test has a simple UI based on QRasterWindow allowing
for checking events and geometries.
Task-number: QTBUG-41186
Change-Id: Ie62a3e250ca666e2fa5c2e3ef37ef0654829397c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Add a class to display debug messages, providing convenience functions for
installing and formatting parameters like indentation. It prints a startup
message containing relevant information about Qt.
Change-Id: Id0a19adbb5953a6ded1a8e692f242b63748e7273
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Output the class hierarchy until a base class within QtWidgets is found.
Change-Id: I0ecee22e2ead1dea8b39cce8ca2f0739290aac22
Reviewed-by: Alexandru Croitor <alexandru.croitor@theqtcompany.com>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
In German layout, "Ctrl+]" is "Ctrl+AltGr+9".
Task-number: QTBUG-51848
Change-Id: I8c05c13a4d46c0818ce4f56ce476c5310a677af2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
