When fallbacks are disabled for QSettings then it should not be
falling back to any child groups or keys that might exist in a
fallback set of settings.
Fixes: QTBUG-85295
Change-Id: I563999293a103702035c8d3b027b59b94ca43c0e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test helper is expected to crash, but when built with asan, it
just fails.
Skip the test in that case.
Pick-to: 6.3 6.2 5.15
Change-Id: I583142f5ec623895df62498100c1a30539b149ab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We didn't delete the new'ed up QMetaTypeInterfaces, causing asan to
complain.
Fix by storing them in strong references alongside their users in a
statically-allocated container.
We use shared_ptr to hold them, because QMetaTypeInterface doesn't
have a virtual destructor, so deleting objects of the TypeInfo types
(plural!) derived from QMetaTypeInterface though a pointer to the base
class is UB. The shared_ptr constructor, however, is templated, so it
stores the correct call (~TypeInfo()) in its type-erased deleter.
We can't use std::make_shared(), because that doesn't support
aggregate initialization until C++20, so we manually new up the
TypeInfos.
5.15 is not affected.
Pick-to: 6.3 6.2
Change-Id: Ic7ec88c34e02a9e0dd3421848c0c0885f4756702
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
We now have a more reliable test for the case with freeSpaceAtBegin(),
so remove the old test, after we verified it actually doesn't even
test that case.
Task-number: QTBUG-99330
Pick-to: 6.3 6.2
Change-Id: Ic108a722cd2fef1e63a05085a76d7572d1f8c875
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The construction of the byte array doesn't actually yield
freeSpaceAtBegin() (anymore?), so the comment above it is misleading
(and the test didn't manage to catch QTBUG-99330, either).
Before removing the misleading test, verify that this assumption is
actually correct across all platforms.
Task-number: QTBUG-99330
Pick-to: 6.3 6.2
Change-Id: I2f497321abc26c4148ced5ac12a5880b9ff5ba9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Amends 9b320edb53.
The above commit made the mistake of relying on the 30yr+ old
fundamental relation
size() - capacity() == freeSpaceAtEnd()
which, however, Qt 6's prepend()-optimization (freeSpaceAtBegin())
broke. Because of that, while size() - capacity() may be large enough
to hold the new data, if freeSpaceAtBegin() > 0, then freeSpaceAtEnd()
may not.
Fix by inspecting freeSpaceAtEnd() instead of capacity(). The
following reserve() call is unaffected, since it internally already
adds freeSpaceAtBegin() to the requested size, which is why the
unconditional reserve() in 9b320edb535a0fbe118933d2e983b73f90c32685^
worked while 9b320edb535a0fbe118933d2e983b73f90c32685's capacity()
check did not.
Fixes: QTBUG-99330
Pick-to: 6.2 6.3
Change-Id: I520f36216011423f97a24484263acd40d8b1fa43
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
- Stress test creates too many threads on run time.
Testing system is limited in 123.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I215074fa432c8aa18b2a753169646841c01d0b2a
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As mentioned in the linked bugreport, we are not allowed to distribute
the uncompressed files from one of the XML test datasets that we use
in our tests.
This patch removes the uncompressed version, and replaces it by the
xmltest.zip archive taken from [0].
Once the test is started, QZipReader is used to uncompress the archive,
and once the test is done, the uncompressed data is removed.
However the test data from [0] is very old, so it is slightly different
from what we had previously (the previous data was taken from w3c).
As a result, 4 test cases are failing with this data. To fix it, we
store the updated versions of 4 xml files separately, and replace them
after uncompressing the archive.
[0]: http://www.jclark.com/xml/
Fixes: QTBUG-81503
Pick-to: 6.3 6.2 5.15
Change-Id: Ied5233970a529deebca56b1eab07fe1c328a2ee0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Tests were leaking objects even if all tests passed. In two cases,
there just wasn't a delete at all, in a third, the existing delete
wasn't reached because of a QSKIP.
tst_QPropertyAnimation is now, locally, LSan-clean.
Pick-to: 6.3 6.2 5.15
Change-Id: Ia53d6f6e467f1d2598a7c50efcdf3a3732fe54df
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Due to the way Qt 5 and 6 registered type names, they end up producing
different type names for the same content for a typedef. For example,
because Q_DECLARE_METATYPE can't manage a comma (it's a macro), users
are forced to write something like:
using MyTypeMap = QMap<QString, MyType>
Q_DECLARE_METATYPE(MyTypeMap)
Qt 5's Q_DECLARE_METATYPE's argument "MyTypeMap" was the only name we
knew about the type, so that's what got saved in the stream. However, Qt
6 QtPrivate::typenameHelper is much more clever and obtains the name
from the compiler itself, so it "sees through" the typedef and registers
"QMap<QString,MyType>" as the official type name.
If another library/plugin has a different typedef name for the same type
(e.g., StringTypeMap), it's indeterminate which type gets saved and will
even change from run to run (depends on the QHash order).
[ChangeLog][QtCore][QDataStream] If QDataStream is used with a
QDataStream::Version < Qt_6_0 to serialize a user type that was
registered via a typedef with the metatype system, the typedef's name is
used in the stream instead of the non-typedef name. This restores
compatibility with Qt 5, allowing existing content to read the same
QDataStreams; reading from older Qt 6 versions should not be affected.
(Note: if more than one typedef name is registered, it's indetermine
which name gets used)
Fixes: QTBUG-96916
Pick-to: 6.3 6.2
Change-Id: I2bbf422288924c198645fffd16a8d811aa58201e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
By using the bucketForHash function we can loop through and find
some appropriate keys to test the edge-case. This will then
automatically keep the test working even if some internals
of QHash changes.
We do this because certain changes which change the bucket the
pre-selected keys would end up in could make the test a no-op,
without warning. And recent and upcoming changes have changed
both this and erase(). We limit the search-space to
the minimum numBuckets * 4, where minimum numBuckets is current
128.
Change-Id: I13b0bce15ee884144e3248846be34667fb5d35cc
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
... and add some additional checks that hopefully leave the next
reader of the code a little less confused than this one was.
Pick-to: 6.3 6.2 5.15
Change-Id: I73c1b9b1ed1683e3b2de0d811d9b20d65464dff4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
memcpy() mustn't be called with a nullptr, even if the size is zero.
Fixes ubsan error:
tst_qiodevice.cpp:561:15: runtime error: null pointer passed as argument 1, which is declared to never be null
Even though ubsan only complained about one of them, fix all three
occurrences of the pattern in the test.
Pick-to: 6.3 6.2 5.15
Change-Id: I5c06ab4a20a9e9f8831392c46c6969c05248fdac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The first case is simple, as it's a static overflow. Theoretically,
the compiler would be allowed to just remove the complete function as
dead code. This is an error left from the port from int to qsizetype:
Qt 5.15 there has uint(MaxAllocSize) + 1, so use quint here again,
qint64 is wrong.
In the second case, we _may_ reach alloc == MaxAllocSize. Check that,
if we do, we don't then add 1 to it.
Pick-to: 6.3 6.2
Change-Id: I93044ed6f1b77559642fa1e4e8f313cf59eeeb79
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
- add test resources to binaries
- link Qt::Gui to tst_qpointer for static build case
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I311827b9c641eaf9537091b051c15f9fcbcb9f0c
Reviewed-by: Kimmo Ollila <kimmo.ollila@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that all platforms can deal with the full tst_QMetaType again,
remove the last traces of the workaround.
Pick-to: 6.3
Change-Id: I530cab8413f8b68903991b30a1f29b5871877a88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QHash::operator[] could grow the hash even if the key being
looked up already existed. This in turn invalidated all iterators.
Avoid this by refactoring findOrInsert() to not grow if the key
already exists.
Added advantage is that this should make lookups of existing keys
slightly faster.
Fixes: QTBUG-97752
Pick-to: 6.3 6.2
Change-Id: I9df30459797b42c434ba0ee299fd1d55af8d2313
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Let's see whether splitting the TUs has made the test amenable to be
compiled with MinGW again.
Pick-to: 6.3
Change-Id: Icde1bad20943c7648dbb119ca879bce62325bd6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There's no sense in copying a ring buffer. Moving is enough. This
marks an important step on the way to preventing accidental copies of
ring buffer content, because the 'QList buffers' member can now no
longer be implicitly shared. While the compiler will still emit the
code for detach()ing, it will now never be executed.
Pick-to: 6.3
Change-Id: I968bfe3e50c46720ed4baca55c99c1f9c518f653
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Let's see whether splitting the TUs has made the test amenable to be
compiled on Clang for ARM again.
Pick-to: 6.3
Change-Id: I6bf1e31189f5058dc393adefabaf3014dce4bcf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 925ad78024.
Reason for revert: Meanwhile, the QNX VM has been assigned more
resources, and the offending test function been split. Re-enable the
test on QNX, to get back to previous test coverage.
Fixes: QTQAINFRA-4669
Pick-to: 6.3
Change-Id: Ib085fbfa7e0d8445f007d1a9346cee3113620720
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Check, in tst_qvarlengtharray, that the forwarding header still works.
Pick-to: 6.3
Change-Id: Ia03cf48457f538287880bb676aea3fa44aeb255f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch installs a QAbstractItemModelTester in the
QSortFilterProxyModel tests.
Change-Id: I9bdcc21ba12f919c91c5b9514a5f4362437318c2
Reviewed-by: David Faure <david.faure@kdab.com>
QHash changes some of its preconditions, so we must not call
findNode without verifying !isEmpty()
Task-number: QTBUG-91739
Task-number: QTBUG-98436
Change-Id: I2701b9a01187530f541a7c9a12db56c92f856d87
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Especially static inline variables. This greatly reduces the amount of
code that existed in macros, moving them to templates.
Additionally, this removes one level of indirection from
Q_APPLICATION_STATIC by removing the std::unique_ptr. We now directly
manage the object's storage.
Change-Id: I2cffe62afda945079b63fffd16bcc825cc04334e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Large amount of threads is unstable and do not finish in given time
Pick-to: 6.2
Change-Id: I0ce4c8cd278d6611c9e9da7326048279ccc458fd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also change usage of QDir::currentPath to QDir::tempPath
instead as QNX tests are run on CI at qemu over NFS.
Pick-to: 6.2
Change-Id: I2e1d6629299acd125117bcce90320c70eeb4a1a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modify similar like is used for Windows
Pick-to: 6.2
Change-Id: I133a8dde2e78cc66aa9544246cd750a6543b4883
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Filter out the last argument of type QPrivateSignal from the signal's
arguments passed to QtFuture::connect().
Pick-to: 6.2
Fixes: QTBUG-92501
Change-Id: Idcd6baba1f01fcc94fa64b1c7030a629d01ed7a1
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
All Qt 6 containers have "fast" prepend these days. Except
QVLA. Instead of enabling "fast" prepend for QVLA, slowing down
idiomatic QVLA use, simply deprecate prepend().
There appear to be no users of this function in qtbase outside tests.
[ChangeLog][QtCore][Deprecation Notices][QVarLengthArray] Deprecated
prepend() because QVarLengthArray is the only Qt container without a
"fast" prepend. If you require that functionality, even though it's a
linear operation, then use insert(cbegin(), ~~~) instead.
Change-Id: I39ff1dd7d4de7fc08d5380a5a7450dd8c8996fe2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove scaffolding in the test again.
[ChangeLog][QtCore][QList] Fixed a regression that caused the range
constructor to fail for pure input_iterator's.
Pick-to: 6.2
Fixes: QTBUG-99036
Change-Id: I72d01a9c44c3862c335d96538f26a453b4c7c554
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code had several bugs:
- it immediately clobbered *this with new state, before having copied
over the elements from the old to the new buffer
- when buffer relocation threw, it would keep the new (partially-filled)
buffer and throw away the old
- it unconditionally used std::move() for non-relocatable types, making
it impossible to restore the original buffer when a move throws
Instead of clobbering *this with new state, do all the work on the
side and change *this only once the reallocation has happened
successfully.
Also use q_uninitialized_relocate_n() and unique_ptr in the
implementation to simplify the code. The former got the necessary
update to use std::move_if_noexcept() instead of an unconditional
std::move() for the non-relocatable case.
[ChangeLog][QtCore][QVarLengthArray] The append()-like functions are
now strongly exception safe. This means reallocation will now use
copies instead of moves, unless the value_type has a noexcept move
constructor.
Fixes: QTBUG-99039
Change-Id: I031251b8d14ac045592d01caed59d4638c3d9892
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This commit extends functionality for QLocale::codeToLanguage()
and QLocale::languageToCode() by adding an additional argument
that allows selection of the ISO 639 code-set to consider for
those operations.
The following ISO 639 codes are supported:
* Part 1
* Part 2 bibliographic
* Part 2 terminological
* Part 3
As a result of this change the codeToLanguage() overload without
the additional argument now returns a Language value if it matches
any know code. Previously a valid language was returned only if
the function argument matched the first code defined for that
language from the above list.
[ChangeLog][QtCore][QLocale] Added overloads for codeToLanguage()
and languageToCode() that support specifying which ISO 639 codes
to consider.
Fixes: QTBUG-98129
Change-Id: I4da8a89e2e68a673cf63a621359cded609873fa2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the in-place constructor throws, the old code had already updated
the container's size(). Fix by delaying the update to after the
in-place construction.
[ChangeLog][QtCore][QVarLengthArray] Fixed a bug whereby a failed
append() would leave the container with an inconsistent size().
Pick-to: 6.2 5.15
Change-Id: Ief1e668d945149bd8ba96c8af1398baaa7876880
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
There seems to have been no-one that checked a simple empty()/isEmpty()...
Pick-to: 6.2 5.15
Change-Id: I7fa567f556532dfa21db759719f1303a768a9732
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If one destroys a running QThread, so far the behavior has been to crash
(à la std::thread) -- assuming the thread hasn't already signalled that
it has finished. This behavior is hostile to solutions such as using
QThread::create(), which always require a wait() before destroying the
thread object.
We can use the opportunity to change the behavior without breaking any
valid code. Instead of crashing, inside QThread's destructor we can ask
the new thread to quit, and then join it (à la std::jthread). This
simplifies the implementation of long-living runnables and the code that
manages them.
Deploying this solution for the whole QThread class may not be entirely
painless. While no correct code would work differently with the proposed
changes, incorrect code that deletes a running thread would no longer
crash "loudly" -- instead, it might deadlock "quietly", have memory
corruptions, etc.
Hence I'm limiting this approach to only the threads created by
QThread::create(), at least for the time being. This also side-steps
perhaps the biggest problem of generalizing the approach, which is that
placing such interrupt+join logic into~QThread's destructor would cause
it to be run _after_ a QThread subclass' own destructor has run,
destroying the subclass' data members too early. This might create
an antipattern if one chooses to subclass QThread. With create(), a
subclass in question exists, and it indeed has NSDMs, but it's entirely
under our control (in fact, I'm placing the logic just in its dtor).
[ChangeLog][QtCore][QThread] Destroying a QThread object created by
QThread::create() while the thread that it manages is still running will
now automatically ask that thread to quit, and will wait until the
thread has finished. Before, this resulted in a program crash. See the
documentation of QThread::~QThread() for more details.
Change-Id: Ib268b13da422e277ee3ed6f6c7b2ecc8cea5750c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The PRINT_2ARD_TEMPLATE macro expansion alone is responsible for about
50% of the compile time and RAM requirements of tst_qmetatype.cpp. By
factoring it into its own TU, we reduce the maximum memory load on my
machine from 4.0GiB to 2.5GiB, provided we don't parallelize the
build, then we take 0.5GiB more.
This is a quick-fix for the QNX build problems currently plaguing the
CI. Going forward, we should probably have a better solution, whatever
that may be.
Task-number: QTQAINFRA-4669
Change-Id: I2732b4c25b369b15cce1c7afe222d041ecb6795a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
... so it can be used by multiple .cpp files.
Task-number: QTQAINFRA-4669
Change-Id: I7212b9b08cd3bfa44ee741ee4789d1d0024e4708
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When deleting the last item in a chain, without it being the last item
in the chain, then we re-use the iterator which was passed in as an
argument. This is wrong if we detached earlier in the function, and
means we return an iterator to the previously shared data.
Pick-to: 6.2
Change-Id: I7da6309e23a32073da59e7da0cbfd1d16734f1ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
- GHS compiler is not fully compliant with iec559. Therefore we need
to update is_iec559 checking for GHS case.
Pick-to: 6.2
Change-Id: Ia094509d26bf5f0109f2937547a056267019cffb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Janne Koskinen <janne.p.koskinen@qt.io>
[ChangeLog][QtCore][QStringBuilder] Added support for QByteArrayView.
Change-Id: If2c23549d533dd31c320f3ee455fcd01ea5b460a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The new overload allows creation of files with non-default permissions.
This is useful when files need to be created with more restrictive
permissions than the default ones, and removes the time window when
such files are available with less restrictive permissions.
[ChangeLog][QtCore][QFile] Added QDir::open() overload that
accepts permissions argument.
Fixes: QTBUG-79750
Change-Id: Iddfced3c324e03f2c53f421c9b31c76dee82df58
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The new argument allows atomic creation of files with non-default
permissions.
Task-number: QTBUG-79750
Change-Id: I4c49455b41f924ba87148302c8d0f77f5de0832b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Commit 6cee204d56 introduced overloads
of lastIndexOf() which drop the 'from' argument, inadvertently fixing
QTBUG-80694, but failed to provide the new overloads for all existing
lastIndexOf() overloads, making the fix for QTBUG-80694 incomplete.
This patch completes the fix, by adding the missing overloads (for
char-likes) and also adds the missing (non-regex) tests to
tst_qstringapisymmetry.
Also amends 1c164ec7f2.
Fixes: QTBUG-80694
Change-Id: Ib4b3d597d658ce2edf01a2bce0d711ecea593d6e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
std::function, which is used to store the type-erased continuation
lambdas, requires the passed callable to be copy-constructible. This
makes impossible to use move-only callables with continuations/handlers.
In particular, it makes impossible passing lambdas that are capturing
move-only objects. The workaround is to store the continuation lambda
inside a wrapper for the callable, which stores the move-only lambda in
a QSharedPtr and can be stored in std::function, since it's copyable.
Pick-to: 6.2
Fixes: QTBUG-98493
Change-Id: I8b7a22fcf68dc132b3c533216a7a1665e9f9fb0a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The only documented replacements for Q*String*::arg() are sequences like
%1, %2, %3 -- where the n-th number is expressed using a sequence of
ASCII digits [1].
The code parsing the replacements however used the QChar::digitValue()
function. That function simply checks if a QChar has a *Unicode digit
value* (no matter what its block/category is), and if so, returns the
corresponding digit value as an int (otherwise returns -1).
The result of this is that a sequence like "%¹" or "%१" actually
triggered substitutions (both count as "1"). Similarly, QChars with
a digit value would be parsed as part of longer sequences like "%1²"
(counting as "12" (!)).
This behavior is weird, undocumented, and extremely likely the usual
backstabbing by Unicode by using "convenience" QChar methods -- that is,
never *intended* by the implementation.
This commit deprecates (via warnings) such usages, which for the time
being are left working as before (in the name of backwards
compatibility). At the same time: given it's extremely unlikely that
someone would be deliberately relying on this behavior, it implements
the desired change of behavior (only accept sequences of ASCII digits)
starting from Qt 6.6, that is, after the next LTS.
Throughout Qt 6's lifetime users will still be able to control arg()'s
behavior by setting an env variable, but that variable (and the support
for Unicode digits) will disappear in Qt 7.
To summarize:
* Qt 6.3->6.5: default is Unicode digits, env var to control
* Qt 6.6->6.x: default is ASCII digits, env var to control
* Qt 7: only ASCII digits, no env var
[1] That's the name Unicode gives to them, cf. https://www.unicode.org/charts/PDF/U0000.pdf
[ChangeLog][QtCore][Deprecation Notices] The arg() functions
featured in Qt string classes have always been documented to require
replacements tokens to be sequences of ASCII digits (like %1, %2, %34,
and so on). A coding oversight made it accept sequences of arbitrary
characters with a Unicode digit value instead. For instance, "%2੩" is
interpreted as the 23rd substitution; and "%1²" is interpreted as the
12th substitution. This behavior is deprecated, and will result in
runtime warnings. Starting from Qt 6.6, arg()'s behavior will be changed
to accept only ASCII digits by default. That means that "%1²" is going
to be interpreted as substitution number 1 followed by the "²" character
(which does not get substituted, so it gets left as-is in the result).
Users can restore the previous semantics (accept Unicode digits) by
setting the QT_USE_UNICODE_DIGIT_VALUES_IN_STRING_ARG environment
variable to a non-zero value. In Qt 7, arg() will only support sequences
of ASCII digits. Note that from Qt 6.3 users can also set
QT_USE_UNICODE_DIGIT_VALUES_IN_STRING_ARG to zero; this will make arg()
use ASCII digits only, in preparation for the future change of defaults.
Change-Id: I8a044b629bcca6996e76018c9faf7c6748ae04e8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In QNX, instead of #include <elf.h>, we have to use #include <sys/elf.h>
since that file is placed in a subdirectory.
Also removed the previous workaround.
Fixes: QTBUG-97833
Change-Id: Id932a5eeb618a42c8778459cdfd8bb5bf903523c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test currently passes in Qt 6, but fails in Qt 5.15, thus the
QT_VERSION check.
Pick-to: 6.2 5.15
Task-number: QTBUG-98653
Change-Id: I3c7b9bc7ef74f605ff63768b38c473296274d0de
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... instead of QT_PREPEND_NAMESPACE(qHash), which is qualified (prepends at least '::'), and therefore disables ADL.
This is not a problem as long as we wrote our qHash() overloads as free functions (incl. non-hidden friends), but it should™ fail for hidden friends, so use the old using-std::swap() trick to bring QT_PREPEND_NAMESPACE(qHash) into scope, proceeding with an unqualified lookup.
Pick-to: 6.2
Change-Id: I00860b2313699849f86bfe3dd9f41db4ce993cd3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These long target names can quickly lead to exceeding Windows' max path
length.
Pick-to: 6.2
Change-Id: Ibd77e53464a71221f9302d490afbe9c41c16646d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The old-syle signal-slot syntax had the advantage of not delivering
signals to slots in derived classes after that derived class's
destructor had finished running (because we called via the virtual
qt_metacall). The new syntax made no checks, so a conversion from the
old to the new syntax may introduce crashes or other data corruptions at
runtime if the destructor had completed.
This commit introduces a Q_ASSERT to print the class name that the
object is not any more. Since this is in inline code, this should get
enabled for users' debug modes and does not therefore depend on Qt being
built in debug mode.
It required some Private classes to be adapted to the new form, by
exposing the public q_func() in the public: part.
Pick-to: 6.2
Fixes: QTBUG-33908
Change-Id: Iccb47e5527544b6fbd75fffd16b874cdc08c1f3e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QAbstractProxyModel::itemData/setItemData should behave
just like data()/setData() instead of calling the
QAbstractItemModel implementation.
Before this change the QAbstractProxyModel implementation
calls its the QAbstractItemModel implementation,
which ends up calling data()/setData() in a loop
bypassing the convenience of itemData/setItemData.
[ChangeLog][QtCore][QAbstractProxyModel] The itemData()
and setItemData() functions will now call the respective
implementations in the source model (after mapping the
index to a source index), matching what data() and
setData() already did.
Before, the proxy model simply called the default
implementations of itemData()/setItemData() in its own
base class (QAbstractItemModel).
Change-Id: I9e680d355f44fa130660dd7e1c8ac37484c1566e
Reviewed-by: David Faure <david.faure@kdab.com>
Use variable args macros to swallow any extra commas in the
expression. To use this, the type of the exception has to be first.
Use Eddy's suggestion for a new name to avoid breaking the old macro.
[ChangeLog][QtTest] Added QVERIFY_THROWS_EXCEPTION, replacing
QVERIFY_EXCEPTION_THROWN, which has therefore been deprecated.
Change-Id: I16825c35bae0631c5fad5a9a3ace4d6edc067f83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch adds an overload of the QDir::mkdir() method that
accepts permissions. This allows setting of the directory
permissions at the time of its creation.
[ChangeLog][QtCore][QDir] Added QDir::mdkir() overload that
accepts permissions argument.
Task-number: QTBUG-79750
Change-Id: Ic9db723b94ff0d2da6e0b819ac2e5d1f9a4e2049
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Q(Multi)Map mutating functions that take reference to a key and/or a
value (e.g. insert(), take(), etc.) must make sure that those references
are still valid -- that is, that the referred objects are still alive --
after the detach() call done inside those functions.
In fact, if the key/value are references into *this, one must take extra
steps in order to preserve them across the detach().
Consider the scenario where one has two shallow copies of QMap, each
accessed by a different thread, and each thread calls a mutating
function on its copy, using a reference into the map (e.g.
map.take(map.firstKey())). Let's call the shared payload of this QMap
SP, with its refcount of 2; it's important to note that the argument
(call it A) passed to the mutating function belongs to SP.
Each thread may then find the reference count to be different than 1 and
therefore do a detach() from inside the mutating function. Then this
could happen:
Thread 1: Thread 2:
detach() detach()
SP refcount != 1 => true SP refcount != 1 => true
deep copy from SP deep copy from SP
ref() the new copy ref() the new copy
SP.deref() => 1 => don't dealloc SP
set the new copy as payload
SP.deref() => 0 => dealloc SP
set the new copy as payload
use A to access the new copy use A to access the new copy
The order of ref()/deref() SP and the new copy in each thread doesn't
really matter here. What really matters is that SP has been destroyed
and that means A is a danging reference.
Fix this by keeping SP alive in the mutating functions before doing a
detach(). This can simply be realized by taking a local copy of the map
from within such functions.
remove() doesn't suffer from this because its implementation doesn't do
a bare detach() but something slightly smarter.
Change-Id: Iad974a1ad1bd5ee5d1e9378ae90947bef737b6bb
Pick-to: 6.2
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
tst_QDate::startOfDay_endOfDay_data() naively assumed some zones would
exist. They don't on QNX, apparently.
Change-Id: I3a364964d03f59f5869b4b7639f089dd303180b1
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
I was briefly confused about why an Etc/GMT+3 test was using GMT as
localtime. Fortunately I worked it out before mis-"correcting" it.
Change-Id: I7b0473c7d3974ef186e1170cf4999aca52aaaf45
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
On QNX, tst_QDateTime::fromStringStringFormat_localTimeZone_data()
failed to set up any rows for the data-driven tests to fetch, leading
to an assertion failure on trying to fetch a row.
Change-Id: I7c405b1142a8cb6d445b501ea44fe3d440570cf3
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The compiler runs out of memory and fails to compile tst_qmetatype.cpp.
Set TST_QMETATYPE_BROKEN_COMPILER from a previous compiler workaround
for QNX to disable the most expensive part of the test.
Task-number: QTQAINFRA-4669
Change-Id: I3a99b6b790dc074e9d1db262e758555fb45e4331
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
If we detach from a shared hash while holding a reference to a key from
said shared hash then there is no guarantee for how long the reference
is valid (given a multi-thread environment).
Pick-to: 6.2
Change-Id: Ifb610753d24faca63e2c0eb8836c78d55a229001
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
We expect to produce all-bits-set in the combined OR'ed value of the
seed, so instead of counting how many bits got set and reporting that,
simply compare to -1 and count how long it took to get that far.
To make sure, I've increased the number of iterations by 50%.
Change-Id: I89446ea06b5742efb194fffd16ba37b2d93c19ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QHashSeed is not a random number generator (though it uses one). It
returns the same value over and over again unless you reset it to a new,
random seed.
Fixes: QTBUG-98480
Change-Id: I89446ea06b5742efb194fffd16ba36601f08d794
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore] Added QtFuture::whenAll() and QtFuture::whenAny()
functions, returning a QFuture that becomes ready when all or any of the
supplied futures complete.
Task-number: QTBUG-86714
Change-Id: I2bb7dbb4cdc4f79a7a4fd494142df6a0f93a2b39
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Extract the definition of q20::ssize() from tst_qanystringview.cpp,
where it had to be placed for its backport to 6.2.
Change-Id: I3f758c98a4b1efd453f4fc044b8d3f1a89de62d1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
At least one OS (QNX) can't dlopen() a library that is still
open for writing elsewhere
Pick-to: 6.2
Change-Id: I2d4425d8c69162cdfa43c2523c7459def7839eb9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Need to use QConcatenable<>::ConvertTo for SFINAE, the forwarded type
alias in QStringBuilder itself doesn't work.
[ChangeLog][QtCore][QAnyStringView/QStringBuilder] Implicit conversion
from QStringBuilder to QAnyStringView now works as advertised.
Pick-to: 6.2
Fixes: QTBUG-98138
Change-Id: I1c300675cf43b13017bc56398ae5d8c1c51e64fe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QObjects must be deleted if the QCoreApplication is being destroyed.
This was previously done by implementing custom code in qtbase and
other modules. So unify it and introduce a Q_APPLICATION_STATIC,
based on the Q_GLOBAL_STATIC, which centralises the logic.
Since we still have a few remaining living QObjects,
this comes in handy to fix those as well.
Task-number: QTBUG-84234
Change-Id: I3040a2280ff56291f2b1c39948c06a23597865c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The relevant MS system calls (say they) don't support date formatting
for years < 1601 (but apparently do in fact) and the year field of the
data structure is unsigned, so can't support years < 0. As a result,
the windows back-end for QSystemLocale failed for negative years.
So replace year < 1601 with a place-holder and substitute after
formatting.
Added new tests (based loosely on one in qtdeclarative that failed) to
verify that this actually works. These reveal that macOS also fails to
handle negative years; marked as expected failure there pending a fix.
Change-Id: I9b63cefd5f0b77a39cf1238549412de3e26ca1bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reduce overhead for including qguiapplication.h by splitting
up qnativeinterface.h into a public and a private part.
[ChangeLog][Potentially Source-Incompatible Changes] The
qguiapplication.h header no longer implicitly includes
qloggingcategory.h. If your code depends on the transitive
include, explicitly include <QLoggingCategory> where needed.
Pick-to: 6.2
Task-number: QTBUG-97601
Change-Id: Ic02327a1c3092e21730160af5c59a9d58dc1239c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The source was already protected, but the destination wasn't.
Pick-to: 6.2
Change-Id: I300f19c3e65abd8bc1eef4309aefa11852d1c049
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In case the class doens't have a default constructor, checking for
object.isValid() will give false because the object won't be created,
however, the class could still be loaded and we could have a valid
jclass.
Pick-to: 6.2
Fixes: QTBUG-96069
Change-Id: I8d59e26d9d7c0e8e363ce443937091a374a24473
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This lets it avoid a two-digit year that would clash with month or day.
That shall make fixing up system locale date formatting run cleaner.
Add a test for QGregorianCalendar's two extensions.
Change-Id: I77083ff9d5e4035763250904a59fcf416286545b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change allows canceling the chain of continuations attached to a
future through canceling the future itself at any point of execution of
the chain.
[ChangeLog][QtCore][Important Behavior Changes] The chain of
continuations attached to a future now can be cancelled through
cancelling the future itself at any point of the execution of the chain,
as it was documented. Previously canceling the future would cancel the
chain only if it was done before the chain starts executing, otherwise
the cancellation would be ignored. Now the part of the chain that wasn't
started at the moment of cancellation will be canceled.
Task-number: QTBUG-97582
Change-Id: I4c3b3c68e34d3a044243ac9a7a9ed3c38b7cb02e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Adding new entries to QOperatingSystemVersion in patch releases
was previously breaking our BC guarantees because the entries are
exported, thus users cannot freely switch between different
patch-releases without a recompile if they adopted the new entries.
Move the data itself to a base class so that the entries can be
constructed inline.
Task-number: QTBUG-97808
Change-Id: Ic44f07488af8a04a3bedc10bebb740c4d68f43f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMultiHash::operator== crashes when comparing two unequal objects.
This patch fixes it.
Pick-to: 6.2
Fixes: QTBUG-98265
Change-Id: Ibf9fef3372a2b4581843be5f25e65cc9a55ef64d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Explain why QSystemLocale needs to be an export. Unexport
QLocaleId::fromName() now that qttools no longer uses it.
QLocalePrivate was only Q_CORE_EXPORT for the sake of one use in
tst_QLocale, that can now be replaced by a call to a public QLocale
method.
Change-Id: I1efe8ee03488acfc6e1c36661f6e956a86e191c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Tests of QTimeZone::dispayName() were burying most of what was
interesting in the variations among them by repetition of a large
amount of boilerplate. Package the repetition in a macro so that
the differences between checks are more evident.
Change-Id: I23bcafab641b7d3bed50248ba5313250c150d30c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MSVC 2022 (17.0.0) complains about "'QString::replace':
12 overloads have no legal conversion for 'this' pointer".
This is a compiler bug. It is reported to MS. Still we workaround
it here so that qtbase can be built with MSVC 2022.
Pick-to: 6.2
Task-number: QTBUG-96975
Change-Id: I0180e2e6760d2809ca61e3cd8f02b04f970172a7
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
And bump NTDDI_VERSION to 0x0A00000B (NTDDI_WIN10_CO) at the same time,
to unblock the developers from accessing the latest Windows APIs.
Pick-to: 6.2
Change-Id: Ifbc28c8f8b073866871685c020301f5f20dc9591
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Stop turning THAI CHARACTER SARA AM into a grapheme boundary because it
breaks a test and chromium does not consider it to be a separate
grapheme.
Fixes: QTBUG-88545
Change-Id: Ib1aea8dbb66ac42b2129cf9fe04c39f5f76eeb36
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update tst_qlocale to take into account "narrow" day representation
change for Russian locales. This version of CLDR changes narrow forms
to one letter. Previously those forms were identical to short forms
(two letter). The new representation is consistent with other languages
and so does not appear to be a bug.
Fixes: QTBUG-94358
Pick-to: 6.2
Change-Id: I9724c281a250685da8232e5c05c9c375a8c79253
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use the Q_INT64_C() macro and qint64()-as-function instead of C-style
casts.
Change-Id: I9d169715da96a49898e9c9e2a6d3ee5182e1d91c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Where std::numeric_limits<...>::min() is used used as invalid value
for an API return, save it as a named constant so that the comparisons
are against an informative name, rather than leaving the reader to
guess the significance of the min-value.
Change-Id: Ia99c75e21856f65cb4494120d05eed36f5fc2d50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation for QProcessEnvironment's default constructor
says:
This constructor creates an empty environment. If set on a
QProcess, this will cause the current environment variables
to be removed.
This is not the case however, because setting such an environment
for a process is equivalent to not setting an environment at all
and the child process is executed with parent's environment.
It is still possible starting from Qt 6.2.0 to create an empty
environment by adding a variable to a null environment and removing
it, but that's cumbersome, and the comparison operator says that
it is equal to the null environment but it is obviously behaving in
a different way.
This change adds an additional constructor to QProcessEnvironment
that can be used to construct a null environment, and changes the
default constructor to produce an empty environment. The comparison
operator is changed to correctly distinguish between such objects.
This is a behavior change, but the current behavior is broken
and this is unlikely to affect working code.
[ChangeLog][QtCore][QProcessEnvironment] An additional constructor
was added to explicitly create an object that when set on QProcess
would cause it to inherit the environment from parent (this was
formerly the behavior of a default-constructed QProcessEnvironment,
which will now (as documented) actually give a process an environment
with no variables set). A new method inheritsFromParent() was added
to test for such objects.
Fixes: QTBUG-58053
Change-Id: I15e20c6a5f01ebe2c736d5578c75dba1ee319320
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Indetnation was bad in commit 0ab3c5c250
and was missed in code review and one comment wasn't updated when the
code was.
Take the opportunity to remove an old TODO that has been completed for
years.
Change-Id: Ice04365c72984d07a64dfffd16b4899604513680
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Don't rely on transitive include from qobject.h, which will go away.
Change-Id: I99dd97ff4fb1d0632d040daab0bffa2d7b85d3ae
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Clang aligns the object at 32-byte boundaries even though we
specifically asked for alignof(void*), so tell it not to sanitize the
address of the plugin object. Tested with Clang 12 and 13.
GCC seems not to be affected, even when ASan is enabled.
If this doesn't work, we may need to accept reading a note that is
improperly aligned. I don't think the output will be actually a correct
note because the intra-note alignment will be wrong (I carefully chose
the ELF note name so it would not require alignment, but that's only
valid up to 8-byte alignments).
Fixes: QTBUG-97941
Change-Id: Ice04365c72984d07a64dfffd16b422fe074d8a70
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since QByteArray/QByteArrayView don't overload nicely, we need to make
the existing QByteArray overload a Q_WEAK_OVERLOAD (= a template) as a
tie breaker. This automatically prefers the QByteArrayView version
over the QByteArray overload, transparently optimizing existing users
passing char string literals to avoid the implicit creation of a
QByteArray just for passing the separator.
None of our modules exports a subclass of QByteArrayList, so turning
join(QByteArray) into a function template should be ok.
[ChangeLog][QtCore][QByteArrayList] Added join(QByteArrayView)
overload.
Change-Id: I090671d9b94c30b63a986f17e966d124c22b5c54
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Beats a manual array with too wide strings. I thought even to simply
replace this with a switch (loc)... it's not like this is
performance-critical code, given it uses QString.
Change-Id: I2bbf422288924c198645fffd16a977778ff8d52d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove at() and chmod() methods of MyEngine class. Those methods
are not used anywhere and look like remainder of old API to me.
Change-Id: I754a4281124cb8c9d74e79a9a2b99fb1b1f41e52
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove useless overrides of QAbstractFileEngine methods from the derived
classes. Also remove "This virtual function must be reimplemented by
all subclasses" passages from the QAbstractFileEngine's documentation.
There are pure virtual methods for such use cases. QAbstractFileEngine
already contains useful defaults for classes not supporting all the
functionality.
Change-Id: Ia25965854f3809b15d7502da3749cc2f3414bbc3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing symLinkTarget() always resolves the symlink
target to an absolute path; It will be clearer to change
LinkName to AbsoluteLinkTarget. It is ready for the commit
about add symLinkPath() to read the raw link path.
Fixes: QTBUG-96761
Change-Id: I8da7e23b066c9ac1a16abb691aa1c4a5f1ff8361
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Wang Fei <wangfeia@uniontech.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Collation with the default QCollator object (no numeric, punctuation or
case sensitivity changes) is a common-place occurrence, so add two
functions to do this work.
It's also what QString::localeAwareCompare() calls.
The test ends up testing that default, static collator updates after the
default QLocale changes too.
Task-number: QTBUG-95050
Change-Id: I7e0b82c2d2fe464082d8fffd1696ac77f32840b2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The check was made against the default locale but the code calls the
system functions (wcscoll, wcsxfrm, wcscmp) for locale-specific
collation, so should be comparing to the system locale's collation
locale (i.e. LC_COLLATE). Also correct the Android-only check in
tst_QCollator::compare() which duplicated the check but neglected the
C locale, which is also supported (via QString::compare).
Pick-to: 6.2
Change-Id: I48c3237dd6825e2070272ab88d95bdb8cbb9fc37
Reviewed-by: Aleix Pol Gonzalez <aleixpol@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QArrayDataPointer<>::size is now a qsizetype, not the uint it used to be.
Pick-to: 6.2
Change-Id: I09d7e5a50401b46a12f29f93b2b39d646b771cfc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
It seems that after commit id 46fc01d7ca
the qpluginloder test case cannot find elf.h in QNX test environment.
This is just a workaround, fix for missing elf.h (QTBUG-97833) needs
to be done later on.
Change-Id: I3f6ec36c8ceaed82552fd0e156a56637c056780d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There's now another half of the seed which will be used by the hashers.
This is not stored in QHash, so it is never changed for the lifetime of
the application (not even when QHashSeed::setDeterministicGlobalSeed()
is called). However, we will not use it when we're in deterministic
mode.
This commit uses the compiler thread-safe statics to implement the
initialization of more than one atomic word, thus freeing us from having
to have a reserved value. As a bonus, the QT_HASH_SEED warning will only
be printed once.
Change-Id: Id2983978ad544ff79911fffd16723f1673f9a5b4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The call to std::from_chars() accepts a sign, but we've already dealt
with a sign, so that would be a second sign. Check the first character
after any prefix is in fact a digit (for the base in use). This is a
follow-up to commit 5644af6f8a.
Fixes: QTBUG-97521
Change-Id: I65fb144bf6a8430da90ec5f65088ca20e79bf02f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, we allocate memory for elements one by one which can get
pretty slow when adding many elements.
[ChangeLog][QtCore][QVarLengthArray] Reduced number of memory
allocations in emplace() by allocating more memory at once.
Fixes: QTBUG-97489
Pick-to: 6.2
Change-Id: Idfb5b5946b047d5215c8ed00770574249f9f5d40
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix warning about unused variable, and use qScopeGuard to make sure that
the limit of the global threadpool is restored even if one of the tests
fail.
Pick-to: 6.2
Change-Id: I36747cb451074cceea961561478210728ed6d313
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qvariant.cpp:3624:15: warning: ‘void* memcpy(void*, const void*, size_t)’ writing to an object of type ‘class QVariant’ with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess]
Change-Id: Ic17a33f599b844d8ab5dfffd16aafcbd74823696
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It doesn't make sense to have a recursive QSet with deleted operator==,
since it's not possible to add elements to it. Consequently declaring a
metatype for it also doesn't make sense. Remove the commented
compile-time check for it.
Task-number: QTBUG-96257
Change-Id: I74ebefb38adcbe36d5c2f317188743e1f37fe16d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When declaring metatypes, the metatype system tries to detect if the
comparison operators for the given type exist and automatically register
them. In case of QHash, the equality operator was enabled if the value
type provides one. But the implementation needs equality operator of
the key type as well. As a result, when the key type has no equality
operator, the metatype system detects that the equality operator is
available for the QHash itself, but the compilation for metatype
registration fails when trying to instantiate the code that uses
equality operator for the key. This is fixed by enabling equality
operators for the QHash only when both the key and value types provide
one.
The same issue existed also for QMultiHash, with the difference, that
QMultiHash didn't have the constraints even on the value type. So added
checks for both.
Fixes: QTBUG-96256
Pick-to: 6.2
Change-Id: Ib8b6d365223f2b3515cbcb1843524cd6f867a6ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add additional template argument to QObjectCompatProperty to specify
a custom getter. This may be useful for classes like
QAbstractProxyModelPrivate the need to customize property getters.
Task-number: QTBUG-89655
Change-Id: I34fe4bdebbbf1446aff60bd20a946454607f52d5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
On macOs with APFS mkdir sets errno to EISDIR, so take the error code
into account.
Pick-to: 6.2
Fixes: QTBUG-97110
Change-Id: I8e7d10c95430a2802bdbfbf94dd65219bd9071a7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Commit ed48391c59 removed the check for
ERROR_ACCESS_DENIED reported by the Windows CreateDirectory(...)
function in case an existing windows drive name was passed as argument.
This restores the behavior of the function which broke after 5.15.
Pick-to: 6.2
Fixes: QTBUG-85997
Change-Id: Ie86188100766f7364acee57b15a250f4a2720b9f
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
- GHS's __PRETTY_FUNCTION__ (used by QT as Q_FUNC_INFO) doesn't have spaces
round the = operator when indicating the type of the template parameter.
The compilation error:
qt5/qtbase/src/corelib/kernel/qmetatype.h", line 2104: note #3316-D:
cannot access position 53 in array of 49 elements
constexpr const char *begin = func + prefix;
^
detected during:
instantiation of
"auto QtPrivate::typenameHelper<T>() [with T=void]" at
line 2186
Task-number: QTBUG-97087
Pick-to: 6.2
Change-Id: I33e61f5d54a61944a5aecf07d149a8dee0ef1e5d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This corresponds to Unicode version 14.0.0.
Added the following scripts:
* CyproMinoan
* OldUyghur
* Tangsa
* Toto
* Vithkuqi
Full support of these scripts requires harfbuzz version 3.0.0,
this version adds support for Unicode 14.0:
https://github.com/harfbuzz/harfbuzz/releases/tag/3.0.0
With this release 10 test cases in tst_qurluts46 were fixed, one
additional test case is failing in tst_qtextboundaryfinder and
is commented out. In total 62 line break test cases and 44 word
break test cases are failing.
A comment in src/corelib/text/qt_attribution.json was updated to
include the URL of the page containing UCD version number.
Fixes: QTBUG-94359
Change-Id: Iefc9ff13f3df279f91cbdb1246d56f75b20ecb35
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few systems, like OpenWRT, may strip the section table off the
resulting binaries (see [1]), making it impossible for us to pinpoint
the exact location of the Qt plugin metadata. This commit moves the meta
data to a location that is identifiable even in fully stripped binaries:
an ELF note.
By naming our section ".note.qt.metadata", we instruct the linker to
place it along the other notes and to mark it in the program header
section. Another advantage is that the notes are usually in the very
beginning of the file, as they are used by the dynamic linker itself, so
we'll need to read much less of the full contents.
The unit test is modified not to attempt to strip the plugin of
debugging data. In fact, we add something to the end that would,
otherwise, be matched as (invalid) metadata.
The following was produced with GCC 11 and GNU binutils ld 2.36.1.
Section Headers:
[Nr] Name Type Addr Off Size ES Flags Lk Inf Al
[ 0] NULL 0000000000000000 00000000 00000000 0 0 0 0
[ 1] .note.gnu.property NOTE 00000000000002a8 000002a8 00000030 0 A 0 0 8
[ 2] .note.gnu.build-id NOTE 00000000000002d8 000002d8 00000024 0 A 0 0 4
[ 3] .note.qt.metadata NOTE 00000000000002fc 000002fc 000001ac 0 A 0 0 4
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
...
NOTE 0x0002a8 0x00000000000002a8 0x00000000000002a8 0x000030 0x000030 R 0x8
NOTE 0x0002d8 0x00000000000002d8 0x00000000000002d8 0x0001d0 0x0001d0 R 0x4
The Qt metadata note is 4-byte aligned and can thus be found in the
second note section, which spans from 0x02d8 to 0x02d8+0xac=0x0384.
GNU readelf -n can even show it:
Displaying notes found in: .note.qt.metadata
Owner Data size Description
qt-project! 0x0000018f Unknown note type: (0x74510001)
description data: 01 06 03 81 bf ...... ff
I chose 0x7451 as the prefix for our notes, even though they're already
namespaced by the owner in the first place, because eu-readelf
mistakenly tries to interpret note 1 as a GNU ABI tag regardless of
owner. The owner name was chosen to be 12 bytes long, so the ELF note
header is 24 bytes in total. There's no space wasted because the payload
needs to be aligned to 32-bit anyway and I didn't want to use only 4
characters (header total size 16 bytes) so we'd skip the "GNU" note on
size, without string comparison. And I couldn't think of a 4-character
representative string ("QtP" ?).
[1] https://github.com/openwrt/video/issues/1
Fixes: QTBUG-96327
Change-Id: I2de1b4dfacd443148279fffd16a3987729346567
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- getgid/getpwuid are not supported
- process should be used with config check
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: Ib6854772bcf52f3533cb722f963426717926258b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Being a test, I'm going to abuse operator-> on end() to check
that we get what we want (a pointer past the end).
Change-Id: I7ab8d017b0fe320018820eff336d496328ade481
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This define used to be set for the entirety of the Qt build but
was lost during the qmake->CMake transition. Re-enable it.
Change-Id: Idc4cb6ada485158559485b60f62f76439550b255
Pick-to: 6.2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This was handled correctly when the backend supplies transitions
bracketing the time in question, but the fallback code tried to use
the DST offset at the time with larger offset from UTC; this did not
work when the gap was due to a change in standard time. Discovered by
ANS1 parsing of a date-time with two-digit year, for which the
date-time parser tried to use 1921-05-01T00:00 local time when filling
in the fields it had parsed; but, when run in Europe/Helsinki, there
is no such time due to the 20m 11s skipped when joining EET from the
prior local solar mean time.
Correct the calculation to use the actual change in offset from UTC,
as used in the (far better tested) between-transitions branch of the
code, rather than the DST offset after the transition.
Add a test-case based on the ASN.1 certificate date whose parsing
revealed the issue. Although it seems nothing in Coin can reproduce
the issue, the reporter has verified that the test does indeed fail on
the system where the bug was found and the fix does fix it.
Fixes: QTBUG-96861
Pick-to: 6.2
Change-Id: I12b02bad01daca2073d1a356452cd573684aa688
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because of the addition of the operator T*(), the expression "it + N"
where N was not exactly qsizetype but any other integer type was a
compilation failure because of ambiguous overload resolution.
With GCC it's apparently a warning:
warning: ISO C++ says that these are ambiguous, even though the worst conversion for the first is better than the worst conversion for the second:
note: candidate 1: ‘QList<T>::iterator QList<T>::iterator::operator+(qsizetype) const [with T = char; qsizetype = long long int]’
note: candidate 2: ‘operator+(char*, ptrdiff_t {aka long int})’ (built-in)
With Clang, it's an error:
error: use of overloaded operator '+' is ambiguous (with operand types 'QList<int>::const_iterator' and 'ptrdiff_t' (aka 'long'))
note: candidate function
inline const_iterator operator+(qsizetype j) const { return const_iterator(i+j); }
note: built-in candidate operator+(const int *, long)
Pick-to: 6.2
Fixes: QTBUG-96128
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a06f23dd56b060
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Less clunky due to having better constexpr support, plus fold
expressions.
Change-Id: I3eb1bd30e0124f89a052fffd16a6bc73ba79ec19
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Unify cancel and finish in QPromise destructor in a single call. This
saves us one extra mutex lock and atomic state change.
Task-number: QTBUG-84977
Change-Id: Iac06302c39a2863008b27325fcf6792d4f58c8ae
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
For now it only has a trivial test (empty) and an all-surrogate test
(Chakma digits) - but at least now all conversions to and from UTF-16
are tested. In particular, there were previously no UTF-32 tests.
Pick-to: 6.2
Change-Id: I9317928a88b9990530126db80e4756b880a364df
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This rewrite uses the actual structures supplied by the system's C
library, so it should be easier to read. It removes hardcoded constants
with little evident meaning in favor of sizeof() and the macros from
that header. It also removes advancing the data pointer in favor of
having absolute offsets.
The resulting implementation is stricter than the original, checking
more fields in the header. Because the QPluginLoader and QFactoryLoader
users may make decisions based on availability of plugins before
attempting to load them, it's better to be stricter here than to fail
later when trying to dlopen() them.
Debugging and testing are much improved. Instead of stored artifacts, I
added a routine to modify a valid plugin to make it invalid, given the
conditions we've found so far.
If you turn debugging on for this category, you'll see things like:
not-elf.fcqdMq.so : Not an ELF file (invalid signature)
wrong-word-size.QrnSAx.so : ELF 32-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
invalid-word-size.bOkXvp.so : Invalid ELF file (class 0), LSB (GNU/Linux)
unknown-word-size.ogYKeF.so : Invalid ELF file (class 66), LSB (GNU/Linux)
wrong-endian.owiElX.so : ELF 64-bit MSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
invalid-endian.FRxClR.so : ELF 64-bit invalid endianness (0) (GNU/Linux)
unknown-endian.FfvRrP.so : ELF 64-bit invalid endianness (65) (GNU/Linux)
elf-version-0.gPTdpQ.so : ELF 64-bit LSB (GNU/Linux), file version 0
elf-version-2.jlIUUg.so : ELF 64-bit LSB (GNU/Linux), file version 2
executable.LlXiFp.so : ELF 64-bit LSB (GNU/Linux), version 1, executable, x86-64
relocatable.UsOYuy.so : ELF 64-bit LSB (GNU/Linux), version 1, relocatable, x86-64
core-file.hqvNRz.so : ELF 64-bit LSB (GNU/Linux), version 1, core dump, x86-64
invalid-type.CIJgfS.so : ELF 64-bit LSB (GNU/Linux), version 1, unknown type 259, x86-64
wrong-arch.UcNmgz.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, AArch64
file-version-0.lZYuda.so : ELF 64-bit LSB (GNU/Linux), version 0, shared library or PIC executable, x86-64
file-version-2.ucfdwL.so : ELF 64-bit LSB (GNU/Linux), version 2, shared library or PIC executable, x86-64
no-sections.rSjsHh.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
no-sections.rSjsHh.so : contains 0 sections of 64 bytes at offset 0 ; section header string table (shstrtab) is entry 0
no-sections.rSjsHh.so : no section table present, not able to find Qt metadata
qtmetadata-executable.vrxcIf.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
qtmetadata-executable.vrxcIf.so : contains 42 sections of 64 bytes at offset 997256 ; section header string table (shstrtab) is entry 41
qtmetadata-executable.vrxcIf.so : shstrtab section is located at offset 996831 size 423
qtmetadata-executable.vrxcIf.so : section 0 name "" type NULL flags X offset 0x0 size 0x0
qtmetadata-executable.vrxcIf.so : section 1 name ".note.gnu.property" type NOTE flags AX offset 0x2a8 size 0x30
qtmetadata-executable.vrxcIf.so : section 2 name ".note.gnu.build-id" type NOTE flags AX offset 0x2d8 size 0x24
qtmetadata-executable.vrxcIf.so : section 3 name ".hash" type HASH flags AX offset 0x300 size 0x44c
qtmetadata-executable.vrxcIf.so : section 4 name ".gnu.hash" type 0x6ffffff6 flags AX offset 0x750 size 0x3b8
qtmetadata-executable.vrxcIf.so : section 5 name ".dynsym" type DYNSYM flags AX offset 0xb08 size 0xd50
qtmetadata-executable.vrxcIf.so : section 6 name ".dynstr" type STRTAB flags AX offset 0x1858 size 0x15d8
qtmetadata-executable.vrxcIf.so : section 7 name ".gnu.version" type 0x6fffffff flags AX offset 0x2e30 size 0x11c
qtmetadata-executable.vrxcIf.so : section 8 name ".gnu.version_r" type 0x6ffffffe flags AX offset 0x2f50 size 0xb0
qtmetadata-executable.vrxcIf.so : section 9 name ".rela.dyn" type RELA flags AX offset 0x3000 size 0x480
qtmetadata-executable.vrxcIf.so : section 10 name ".rela.plt" type RELA flags AX offset 0x3480 size 0x7e0
qtmetadata-executable.vrxcIf.so : section 11 name ".init" type PROGBITS flags AX offset 0x4000 size 0x1b
qtmetadata-executable.vrxcIf.so : section 12 name ".plt" type PROGBITS flags AX offset 0x4020 size 0x550
qtmetadata-executable.vrxcIf.so : section 13 name ".plt.got" type PROGBITS flags AX offset 0x4570 size 0x8
qtmetadata-executable.vrxcIf.so : section 14 name ".text" type PROGBITS flags AX offset 0x4580 size 0x110e
qtmetadata-executable.vrxcIf.so : section 15 name ".fini" type PROGBITS flags AX offset 0x5690 size 0xd
qtmetadata-executable.vrxcIf.so : section 16 name ".rodata" type PROGBITS flags AX offset 0x6000 size 0x473
qtmetadata-executable.vrxcIf.so : section 17 name ".qtversion" type PROGBITS flags AX offset 0x6478 size 0x10
qtmetadata-executable.vrxcIf.so : section 18 name ".qtmetadata" type PROGBITS flags AX offset 0x64a0 size 0x19b
qtmetadata-executable.vrxcIf.so : found .qtmetadata section
qtmetadata-writable.stzwrk.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
Change-Id: I42eb903a916645db9900fffd16a4437af9728eea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
clang warns that: local variable 'big' will be copied despite being
returned by name [-Wreturn-std-move]
So force the intended move using std::move.
Change-Id: If5ff557c1b577789e6659783d8106295fafb3485
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add startOnReservedThread that specifically releases a reserved thread
and uses it atomically for a given task. This can make a positive
number of reserved threads work.
Change-Id: I4bd1dced24bb46fcb365f12cbc9c7905dc66cdf1
Reviewed-by: David Faure <david.faure@kdab.com>
Given on most CI configurations we run tests only on debug builds, this
means that effectively we don't test JIT paths (JIT is kept disabled in
debug builds). To keep it enabled in a test, we have a few options:
* export a developer-build-only variable from QtCore, to force JIT
usage, and set it in the test. This is still suboptimal as many
configurations aren't using developer builds in the first place;
* use the already existing QT_REGEXP_USE_JIT environment variable,
setting it from CMake/CTest. The problem here is that although add_test
does support it, we don't expose it through our wrapper functions;
* just set that env variable from within the test itself. I went for
this option.
Change-Id: I73abfb7fc0d76ec77e881f24c5daf5be304ab948
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- getgrgid/getpwuid are not supported
- the default constructor of "ObserverOrUninit" must be referenced for GHS compiler
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I24093da76e116aba4b87a8f5c5763b03d082a2cd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Both functions took a QString for the input file name, but while the ELF
parser had an optional QLibrary pointer (which was never null) where to
store the error string, the Mach-O parser received a pointer to a
QString. So make both of them take a single in/out QString pointer,
which has the file name on input and is cheap for us because of COW.
Drive-by fix the name of the static function in qmachparser.cpp from
"ns" (which stood for "not suitable") to "notfound".
Change-Id: I3eb1bd30e0124f89a052fffd16a8182f4f8541c3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When we created the functionality, the levels were not yet standardized.
Now they are and you can use -march=x86-64-v3 (for example) to get to
them. We're making a split between "v1" and "baseline" here for the
benefit of 32-bit, which is not included in the ISA levels.
Change-Id: I2de1b4dfacd443148279fffd16a397a700b9a15a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This will allow us to make changes in QtCore itself, without having to
worry about moc compatibility.
The output uses an #ifdef so this version of moc can still be used to
compile earlier versions of Qt (usually, in cross-compilation
environments). See discussion in the mailing list[1].
[1] https://lists.qt-project.org/pipermail/development/2021-September/041732.html
Change-Id: I2de1b4dfacd443148279fffd16a39784c80c5f3b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch removes most of the checks that are made using C++20
__cpp_* macros for features available in C++17 and earlier.
Library feature check macros (__cpp_lib_*) are unaffected.
Change-Id: I557b2bd0d4ff09b13837555e9880eb28e0355f64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With the QRegExp variant removed, it was weird to have all QSFPM
tests in "tst_qsortfilterproxymodel_regularexpression", even those
completely unrelated to regexps. Instead of reuniting into a single
executable as before, I simply split it out in separate executables:
* tst_qsortfilterproxymodel has the "standard" QSFPM tests
* tst_qsortfilterproxymodel_regularexpression has the regexp-related tests
* tst_qsortfilterproxymodel_recursive is separate as before
Change-Id: I345530b4352671164008bba4805af7b12ac90247
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Don't bother overwaiting in waitForDone(), if it was done at one point
after it was called we can return true. And do not stop threads recently
awakened by a startThread call as they have tasks to do.
Make allowing at least one thread regardless of reservation more
standard instead of hacked in certain places.
Pick-to: 6.2
Change-Id: I304bcdc5822f440d5e72fc33ba2aa1678c9ba0d0
Reviewed-by: David Faure <david.faure@kdab.com>
This header is a C++17 feature that is already used unconditionally
in qtypeinfo.h.
Change-Id: I26330d298e95102f3e94c0c69fc95c1025666eb4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Testlib is not thread safe. Store the status into variable and check
it in the main thread instead.
Pick-to: 6.2
Change-Id: I840c8a3dceb1115a1b81ffeaa0fab96f9d2f1ff0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt requires a compiler that support C++17 thus __cplusplus
is always 201703L or higher. This patch removes checks
for __cplusplus value that always succeed.
Change-Id: I4b830683ecefab8f913d8b09604086d53209d2e3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
In addition to checking the .lnk extension, check that the
the specified path is not a path to a directory.
Pick-to: 6.2
Fixes: QTBUG-85058
Change-Id: I83cef3d94c6ffa82a88f374c5b41779e88fe40b8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Unix QThread implementation stores pthread_t as a system thread ID
when the thread is created, but never resets the system ID when
those threads are destroyed. Some implementations may reuse the
same thread IDs for new threads, and this may cause QThread::wait()
to erroneously complain that "Thread tried to wait on itself".
This patch sets the system thread ID to nullptr when the thread is
about to exit and be destroyed by the system.
A regression test is added to tst_qthread.
Fixes: QTBUG-96846
Pick-to: 5.15 6.2
Change-Id: I0850425dd0e09af50e59c9038e7e662a2a624beb
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The multi-state return code was a legacy of how Arvid wrote the ELF
parser code back in the day, the fact that it scanned for two different
types of plugins in Qt 4 and that the metadata could exist in different
places. None of that matters nowadays: who cares if the file is a
corrupt binary, not a valid binary, does not have the right
architecture, or has no suitable section? It's not a plugin, period.
The Qt 4 plugin mechanism was removed for Qt 5.0 in commit
7443895857 ("Remove support for Qt 4 style
plugins").
Change-Id: I42eb903a916645db9900fffd16a442d800399b98
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Debug builds were broken.
WARNING: tst_QPluginLoader::errorString() testdata bin/libtst_qpluginloaderlib.dylib could not be located!
$ ls -l bin
total 112
-rwxr-xr-x 1 tjmaciei staff 77296 Sep 14 08:46 libtheplugin_debug.dylib
-rwxr-xr-x 1 tjmaciei staff 33408 Sep 14 08:46 libtst_qpluginloaderlib_debug.dylib
Pick-to: 6.2
Change-Id: I42eb903a916645db9900fffd16a4bb0a51ef967c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit efb90f6e7e.
Reason for revert: behavior change for signal listeners
Change-Id: Ibe3c5d496cd61a9fccab17a10cc9fda8334fc9d4
Reviewed-by: Björn Schäpers <qt-codereview@hazardy.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends ca54b741d6.
operator< is not constrained in MSVC's standard library, either.
Pick-to: 6.2
Fixes: QTBUG-96690
Change-Id: Ibcbb9e53a1f9e8b13786f6d8c01489c61d8d2d7f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This amends commit 68f19fb630 to only
consume one 't' from the format string, to match qlocale.cpp's
serialization of time-zone specifiers, which only consumes one, so
will repeat the time-zone specifier as many times as unquoted t
appears in the format. It's hard to imagine why anyone would want this
behavior, but it's what our serialization has always done and parsing
should match serialization.
Add test-cases for double time-zone specifier.
Delete a lie in the process.
Task-number: QTBUG-95966
Change-Id: I574896040a74085dee89a4fefd8384be44ad827b
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This signal is emitted by the QIODevice itself, so we don't have to
emit it from QProcess::close().
Pick-to: 6.1 6.2
Change-Id: I9165b3eebadc17a66cc834d5ef54441d13f23d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Ensure that expired threads have actually finished before attempting
to restart them. Calling start() on a thread that is not yet finished
does nothing.
Add a regression test into tst_qthreadpool that attempts to trigger
reuse of expired threads and verifies that all submitted tasks
execute.
Fixes: QTBUG-72872
Pick-to: 6.2
Change-Id: I2109b628b8a4e91491115dc56aebf3eb249646b5
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QLocale::system() was not making use of QLocaleFormat::Narrow, always
treating it in the same way as QLocaleFormat::Short.
This patch fixes the issue for day and month names.
The implementation falls back to CLDR if system locale fails to
provide some data.
Pick-to: 6.2
Task-number: QTBUG-84877
Change-Id: Ia37e59dbf02d7a5e230f2767d294b9ab7de37f33
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
System headers were jumbled in with Qt headers. Separate those out and
use standard names for Qt headers. Tidied some #if-ery.
Change-Id: Ic8c61797303567eeaef48e2560e91924ddb380f0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLocale and QString tests had copies of a TransientLocale; we've
recently improved the QLocale one. Rather than duplicating those
rather complicated improvements, finally share a common version.
In the process, I noticed that setlocale() only returns the prior
value when passed nullptr as the new value; so rework the
implementation to get that right, so that it now correctly restores
the prior locale. That, in turn, means there's now a later call to
setlocale(), when we actually set the changed setting, which may
invalidate the earlier return; so copy it to a QByteArray before the
second call.
Included Ivan Solovev's improved version of how to reset the locale,
since TransientLocale needs it.
Pick-to: 6.2
Change-Id: I4cb1efbda42f0e2cdd934e04b3b3732ce0f45a06
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Qt 6.x does not need to be able to read the old Qt 5-based binary JSON
metadata. The QT_WARNING_DISABLE_DEPRECATED was needed in 5.15 while we
used the then-deprecated functions to decode.
Pick-to: 6.2
Change-Id: I2de1b4dfacd443148279fffd16a39ee074da3ef4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
It was disabled during the CMake port, but appears to work now.
Change-Id: I2de1b4dfacd443148279fffd16a3a166a3e10671
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test is randomly failing in the CI on QEMU. Couldn't reproduce it on
the actual armv7 hardware, so most likely it's not a Qt bug.
Fixes: QTBUG-96103
Pick-to: 6.1 6.2
Change-Id: I60b7264c6ce44b3b327fdd0dbcede006717c65a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The name of is_utf8_encoded type seems to imply that QByteArray and
const char * contain UTF-8 encoded data. This is not always the case.
When used with QByteArray API, those types are handled as containing
ASCII-only. It's only when used with APIs of other classes (QString,
QLatin1String) they are handled as UTF-8. This renames the check to
is_bytearray_like_v and clarifies its usage. No need to handle
QUtf8StringView this way because it works just fine with the current
testcases.
While at it, also remove unused is_latin1_encoded trait.
Task-number: QTBUG-92021
Change-Id: I44e40cf3c0dd07e5b3cf1e47ff7a04f1c548aa97
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing a, ap, A and AP specifiers all force the case of the
formatted am/pm indicator. The indicators returned by QLocale's
amText() and pmText() methods are those given in CLDR, with no case
coercion. Application writers may reasonably want these strings used
verbatim, rather than having to chose a case and impose it on the
locale's indicators, in defiance of national custom. For example,
while en_US uses upper-case indicators by default, cs_CZ uses
lower-case ones. An application author writing a time format has been
forced to chose which of these locales to be wrong in.
Add support for aP and Ap specifiers, whose mixed case indicates that
the locale's case is to be respected. Amend an existing test-case of
tst_QLocale's formatDateTime() that used Ap (expecting, of course, an
upper-case indicator followed by a stray p) to now expect the
locale-appropriate-cased indicator. Extend formatTime() to test cases
using aP and Ap, to illustrate the difference between en_US and cs_CZ.
Rework QDateTimeParser to also support the new format specifier. This
required expanding its Case enum, used by the getAmPmText() method,
which was formerly shared with QDateTimeEditPrivate; however, as that
class no longer makes any reference to this method, it and the enum
can be made private, allowing a systematic clean-up of their use.
Added test-cases for both serialization and parsing; and amended some
existing parsing tests to verify am/pm indicators are matched
case-insensitively.
[ChangeLog][QtCore][Important Behavior Changes] Time formats used by
QLocale, QTime and QDateTime's parsing and serialization now recognize
'aP' and 'Ap' format specifiers to obtain an AM/PM indicator, using
the locale-appropriate case for the indicator, where previously the
author of a time format had to pick a case that might conflict with
the user's locale. For QTime and QDateTime the locale is always C,
whose indicators are uppercase. For QLocale, the case will now match
that of amText() or pmText(). Previously, 'aP' would have been read as
a lower-case indicator followed by a 'P' and 'Ap' as an upper-case
indicator followed by a 'p'. The 'P' or 'p' will now be treated as
part of the format specifier: if the prior behavior is desired, either
use 'APp' or 'apP' as format specifier or quote the 'p' or 'P' in the
format. The prior 'a', 'ap', 'A' and 'AP' specifiers are otherwise
unaffected.
Fixes: QTBUG-95790
Change-Id: I26603f70f068e132b5c6aa63214ac8c1774ec913
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Instead of making it return a non-useful nullptr.
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a245cce5ea65f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The operator checks cause compilation errors when trying to check for
their existence for recursive containers. This happens because of trying
to check for the operators on the template parameter type(s), that
inherit from the container itself, which leads to compilation errors.
Introduced alternative versions of the operator checks (with _container
suffix), that first check if the container is recursive, i.e. any of its
template parameter types inherits from the given container, and skips
the operator check, if that's the case.
The fix is done for all Qt container types that had the problem, except
for QVarLengthArray and QContiguousCache, which don't compile with
recursive parameter types for unrelated reasons.
Fixes: QTBUG-91707
Pick-to: 6.2 6.1
Change-Id: Ia1e7240b4ce240c1c44f00ca680717d182df7550
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The parser was lenient in accepting backslashes followed by invalid
characters, but accidentally sign-extended everything above 0x7f causing
broken outputs that weren't valid UTF-16 either.
For example, the sequence "\\\xff" (backslash followed by 0xff) produced
sequence "\ud7bf\udfff" (U+D7BF is not a surogate pair).
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a113c703a7696f
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Some backends were missing support for standalone days and months,
also the standaloneDayName() implementation was always using the
same codepath as dayName().
This patch fixes the issues.
Support for narrow format will be added in the following patch.
Task-number: QTBUG-84877
Pick-to: 6.2
Change-Id: I38ee06342cafab544e3c69097bd0e6ae68e85645
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was previously calling setlocale(), which makes no difference to
the Unix backend for the system locale, since that's based on
environment variables (that would normally be used to get default
values for the various setlocale() categories, but only the first time
each is asked for). So, on Unix, set the environment variable, too.
It's also necessary to instantiate a QSystemLocale instance
transiently to trigger a refresh of the system locale data.
Pick-to: 6.2
Change-Id: If92e44053f9021e96c814f4b289f4fadaa7027e0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This is the kind of loop that the autovectorizer is pretty good
at, but this is really just a type of memchr, so help dumber
compilers and build modes without vectorization.
Drive-up fix the style of the test code.
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a022a35fa24c17
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We have previously been using the standalong (nominative) month names
both when asked for that and when asked for the plain (genitive) month
name, probably because there was no LCTYPE value for the
latter. However, MS's docs for the standalone values do contain a
comment telling us how to get the genitive names.
Rename the old monthName() to standaloneMonthName() and add a
monthName() that calls GetDateFormat() suitably, as described by the
MS doc.
Pick-to: 6.2 5.15
Fixes: QTBUG-92018
Fixes: QTBUG-86279
Change-Id: I27f63198c3a15b792683f476d2019078b0860f99
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The new test is called tst_qurluts46. It verifies QUrl::{to,from}Ace()
functionality using the data from IdnaTestV2.txt supplied by Unicode.
The file was downloaded from
https://www.unicode.org/Public/idna/13.0.0/IdnaTestV2.txt
Task-Id: QTBUG-85371
Change-Id: I4c6a4942ef6018dafc90cb84ef73f6b2614566d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The testcase was disabled with no explanation in
2766322de3 but seems to work fine.
Change-Id: Ibc22a4ffb756604e22c1f2cf1165919c1d7f1212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Now that we don't need '\0'-termination on the data, this is possible.
Moved QByteArray's tests to tst_QByteArrayApiSymmetry and added some
more test-cases.
[ChangeLog][QtCore][QByteArrayView] Added numeric parsing methods.
Change-Id: Ic0df91ecfe5dbf6f008d344dd0464d7927f32273
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove third-party code in favor of STL. Implement (for now)
strtou?ll() as inlines on strntou?ll() calling strlen() for the size
parameter. (This is not entirely safe, as a string lacking
'\0'-termination but with at least some non-matching text after the
numeric portion would formerly be parsed just fine, but would now
produce a crash. However, strtou?ll() are internal and callers should
be ensuring '\0'-termination.)
Task-number: QTBUG-74286
Change-Id: I0c8ca7d4f6110367e93b4c0164854a82c5a545e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The connect() documentation makes it clear that UniqueConnection does
not work with free functions / function objects and the like; only with
actual PMFs. Rather than silently *ignoring* the flag, be vocal about its
presence by warning, and make the connection fail (as the user has
passed an illegal argument).
[ChangeLog][QtCore][QObject] QObject::connect() now will refuse to
connect a signal to a free function / function object if UniqueConnection
is passed. Note that UniqueConnection has never worked for such
connections -- the flag was simply ignored, and they were established
multiple times. Now, the flag is not ignored and results in a connection
failure (as well as a runtime warning by Qt).
Change-Id: I6509667018c74f9bd24910cde0a1b16c5f84f064
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a needle has length 1 (because it's a QChar/char16_t, or because
it's a string-like of length 1) then an ad-hoc search algorithm is
used. This algorithm had a off-by-one, by not allowing to match at
the last position of a haystack (in case `from` was `haystack.size()`).
That is inconsistent with the general search of substring needles
(and what QByteArray does). Fix that case and amend wrong tests.
This in turn unveiled the fact that the algorithm was unable to cope
with 0-length haystacks (whops), so fix that as well. Drive-by, add a
similar fix for QByteArray.
Amends 6cee204d56.
Pick-to: 6.2
Change-Id: I6b3effc4ecd74bcbcd33dd2e550da2df7bf05ae3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use U+FB01 LATIN SMALL LIGATURE FI instead of U+00DF LATIN SMALL
LETTER SHARP S in testcases that need non-ASCII URLs that are
normalized to ASCII. The latter is not normalized to ASCII when
using UTS #46 nontransitional processing.
Task-number: QTBUG-85371
Change-Id: I8c153feb58e556b1d31439018cc84d8e8f1de1a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
U+04CF CYRILLIC SMALL LETTER PALOCHKA was undefined in Unicode 3.5 used
by IDNA2003 but it is allowed in UTS #46.
Task-number: QTBUG-85371
Change-Id: I7f5c0f6dc57f1197fd509e98328207d6179f1624
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
IDNA 2008/UTS #46 do not use nameprep anymore and have different
validity rules.
Unexport qt_nameprep() and qt_check_std3rules() because they
are not used by any tests anymore.
Task-number: QTBUG-85323
Change-Id: I38c0dbae9a6bd108fbcfac350767aa7e757e786f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use U+1F100 DIGIT ZERO FULL STOP instead of U+1F4D9 ORANGE BOOK.
The latter is not allowed according to IDNA 2003 rules but is allowed
according to UTS #46 rules. The former is disallowed in either case.
Task-number: QTBUG-85371
Change-Id: Idc8afef68c26ae0b702a475e5a53592182998a08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Relying on the fact that a given capturing group captured a null string
doesn't allow users to distinguish whether a capturing group did not
capture anything, or captured a null substring (say, from a null subject
string).
Perl allows for the distinction: the entries in the @- and @+ arrays are
set to values in case there is a capture, but they're undef otherwise.
PCRE2 gives us the information already in the results "ovector", but
it was simply not exposed to QREM users. So, expose it.
[ChangeLog][QtCore][QRegularExpressionMatch] Added the hasCaptured()
family of functions to know if a given capturing group has captured
something.
Change-Id: Ic1320933d4554e2e313c0a680be1b1b9dd95af0b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was not ported to CMake yet.
Pick-to: 6.2
Fixes: QTBUG-88601
Change-Id: Ied3b1a0e2ddfbcf003cb0d8d01d5f64cb83cf4e7
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
An oversight in the code kept the algorithm in the GB11 state, even if
the codepoint that is being processed wouldn't allow for that (for
instance a sequence of ExtPic, Ext and Any).
Refactor the code of GB11/GB12/GB13 to deal with code points that break
the sequences (falling back to "normal" handling).
Add some manual tests; interestingly enough, the failing cases are not
covered by Unicode's tests, as we now pass the entire test suite.
Amends a794c5e287.
Fixes: QTBUG-94951
Pick-to: 6.1 5.15
Change-Id: If987d5ccf7c6b13de36d049b1b3d88a3c4b6dd00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the process, actually use the constants as the size of some arrays,
instead of making [1024] arrays and then only using a few entries.
Change-Id: I9f36b322840393b8680788190cf8b40a828f4957
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As QPropertyAlias was public by accident in 6.0, we have to ensure that
it still works in 6.2.
This re-adds some tests for it, and reimplements the unlinking
functionality. To avoid performance regressions in hot-paths,
a new unlink_fast function is added, which behaves like the old unlink:
It ignores the special handling for QPropertyAlias, so that we can skip
the tag check. It is only used in QPropertyObserverNodeProtector and
clearDependencyObservers, where we already know the type of the
observer.
Fixes: QTBUG-95846
Pick-to: 6.2
Change-Id: Ifb405b8327c4d61c673b1a912ed6e169d27c2d8f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
When assigning multiple variables to a specific section, both GCC
and Clang legitimately error out if those variables wouldn't end
up in the same section (e.g. if one of them is going to a read-only
section while the other one is going to a read-write section).
In C++, when a seemingly const variable needs dynamic initialization,
it needs to be stored in a read-write section.
Clang 13 changed internals for how some constants are materialized.
Now, when a variable is initialized with an expression containing
plain old fashioned casts, it is considered to be potentially
runtime initialized (at the point when section assignment conflicts
is evaluated). Therefore, Clang 13 errors out on fakeplugin.cpp
with errors like:
fakeplugin.cpp:36:39: error: 'message' causes a section type conflict with 'pluginSection'
QT_PLUGIN_METADATA_SECTION const char message[] = "QTMETADATA";
^
fakeplugin.cpp:32:40: note: declared here
QT_PLUGIN_METADATA_SECTION void *const pluginSection = (void*)(0xc0ffeec0ffeeL);
^
See https://bugs.llvm.org/show_bug.cgi?id=51442 for discussion
on the matter in Clang.
To simplify things, just initialize the fake pointers as regular
uintptr_t instead, avoiding the whole matter. This produces the
exact same contents in the section as before.
For what it's worth, the actual manually constructed metadata in
fakeplugin.cpp doesn't seem to have any effect on running the
QPluginLoader tests on either ELF or MachO right now.
Change-Id: Ib84a2ceb20cb8e3a1bb5132a5715538e08049616
Pick-to: 6.2 6.1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't go via QString when we don't need to.
Put expected after actual, not the other way round.
Give tests and test-cases sensible names.
Prefer function-style cast over C-style.
Change-Id: I0b79534a9cc95f2e312a85394693ac674ff3d1d6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There's no need of duplicating code all over the place; QString can
reuse the implementation of the indexOf/contains/count/lastIndexOf
family of functions already existing for QStringView.
For simplicity, the warning messages (that our autotests actually check)
have been made more generic, rather than introducing some other
parameter (as in, "which class is using this functionality so to emit
a more precise warning"), which would have just complicated things as
the implementation of these functions is exported and used by inline
QStringView member functions.
Change-Id: I85cd94a31c82b00d61341b3058b954749a2d6c6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
An empty QString(View) is allowed to have nullptr as its data pointer
(of course, only if its size is 0). This wasn't properly
checked in QRegularExpression, which passed such nullptr to
PCRE, and that resulted in PCRE raising an error (PCRE_ERROR_NULL).
Detect this case and pass a dummy pointer to keep PCRE happy.
Fixing and testing this in turn exposed a problem with QStringView
support in QRegularExpression when used over a null QString: the
code is supposed to use the QStringView(QString) constructor and NOT
qToStringViewIgnoringNull. That's because QRE distinguishes null
and empty subjects; when using qToStringViewIgnoringNull over
a null QString, one gets a non-null QStringView (!). Again, this in
turn exposed a problem with a QRegularExpression autotest that assumed
that a null match could only mean "no match" (instead, it can happen at
position 0 of a null QString(View)).
Change-Id: Ifb3cf14dec42ce76fcdbcb07ea1d80784d52ef65
Pick-to: 6.1 6.2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When trying to fix 0-length matches at the end of a QString,
be83ff65c4 actually introduced a
regression due to how lastIndexOf interprets its `from` parameter.
The "established" (=legacy) interpretation of a negative `from` is that
it is supposed to indicate that we want the last match at offset `from +
size()`. With the default from of -1, that means we want a match
starting at most at position `size() - 1` inclusive, i.e. *at* the last
position in the string. The aforementioned commit changed that, by
allowing a match at position `size()` instead, and this behavioral
change broke code.
The problem the commit tried to fix was that empty matches *are* allowed
to happen at position size(): the last match of regexp // inside the
string "test" is indeed at position 4 (the regexp matches 5 times).
Changing the meaning of negative from to include that last position (in
general: to include position `from+size()+1` as the last valid matching
position, in case of a negative `from`) has unfortunately broken client
code. Therefore, we need to revert it. This patch does that, adapting
the tests as necessary (drive-by: a broken #undef is removed).
Reverting the patch however is not sufficient. What we are facing here
is an historical API mistake that forces the default `from` (-1) to
*skip* the truly last possible match; the mistake is that thre is simply
no way to pass a negative `from` and obtain that match. This means that
the revert will now cause code like this:
str.lastIndexOf(QRE("")); // `from` defaulted to -1
NOT to return str.size(), which is counter-intuitive and wrong. Other
APIs expose this inconsistency: for instance, using
QRegularExpressionIterator would actually yield a last match at position
str.size(). Similarly, using QString::count would return `str.size()+1`.
Note that, in general, it's still possible for clients to call
str.lastIndexOf(~~~, str.size())
to get the "truly last" match.
This patch also tries to fix this case ("have our cake and eat it").
First and foremost, a couple of bugs in QByteArray and QString code are
fixed (when dealing with 0-length needles).
Second, a lastIndexOf overload is added. One overload is the "legacy"
one, that will honor the pre-existing semantics of negative `from`. The
new overload does NOT take a `from` parameter at all, and will actually
match from the truly end (by simply calling `lastIndexOf(~~~, size())`
internally).
These overloads are offered for all the existing lastIndexOf()
overloads, not only the ones taking QRE.
This means that code simply using `lastIndexOf` without any `from`
parameter get the "correct" behavior for 0-length matches, and code that
specifies one gets the legacy behavior. Matches of length > 0 are not
affected anyways, as they can't match at position size().
[ChangeLog][Important Behavior Changes] A regression in the behavior of
the lastIndexOf() function on text-related containers and views
(QString, QStringView, QByteArray, QByteArrayView, QLatin1String) has
been fixed, and the behavior made consistent and more in line with
user expectations. When lastIndexOf() is invoked with a negative `from`
position, the last match has now to start at the last character in the
container/view (before, it was at the position *past* the last
character). This makes a difference when using lastIndexOf() with a
needle that has 0 length (for instance an empty string, a regular
expression that can match 0 characters, and so on); any other case is
unaffected. To retrieve the "truly last" match, one can pass a
positive `from` offset to lastIndexOf() (basically, pass `size()` as the
`from` parameter). To make calls such as `text.lastIndexOf(~~~);`, that
do not pass any `from` parameter, behave properly, a new lastIndexOf()
overload has been added to all the text containers/views. This overload
does not take a `from` parameter at all, and will search starting from
one character past the end of the text, therefore returning a correct
result when used with needles that may yield 0-length matches. Client
code may need to be recompiled in order to use this new overload.
Conversely, client code that needs to skip the "truly last" match now
needs to pass -1 as the `from` parameter instead of relying on the
default.
Change-Id: I5e92bdcf1a57c2c3cca97b6adccf0883d00a92e5
Fixes: QTBUG-94215
Pick-to: 6.2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All the tests were using the C locale, so were equivalent to tests of
QTime::toString(). Add a locale column and some test-cases in
preparation for a change to am/pm indicators.
Task-number: QTBUG-95790
Change-Id: I3ad917b7a6f3d3bfe31d6a5a5da596025f173e81
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QtConcurrent::RunFunctionTask class keeps a variable to store the
result of QtConcurrent::run when it becomes available, so that it can be
reported afterwards. This requires the result type to be
default-constructible. However there's no need in storing the result, it
can be reported immediately after it becomes available.
Pick-to: 6.1 6.2
Fixes: QTBUG-95214
Change-Id: I95f3dbff0ab41eaa81b104a8834b37d10a0d193a
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Doing the deletion at the end of the block only works if the test
passes. Drive-by: remove spurious braces from single-line bodies of
single-line controls. The QTest macros are done properly.
Pick-to: 6.2 6.1 5.15
Change-Id: I83002547dba49ab9792f4db44d73151b1c036900
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
When the test failed, it never released the blocking slot, so the
tested thread remained blocked indefinitely. Blacklisting doesn't
rescue that: the test run gets killed by Coin's watchdog.
Use a QScopeGuard() to release the clocked slot on failure.
replacing the release that was happening only on success.
As drive-by clean-up, smarten up the code a little and remove an
unused enum.
Pick-to: 6.2 6.1 5.15
Change-Id: Ie035dafe6e4b1d82aea5de38ceb31c0f7fcf81d7
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Exhausts the entire buffer which double-conversion is left to work with.
Also has a large amount of precision, which apparently we need to store
temporarily.
Task-number: QTBUG-88484
Change-Id: I87e8c323676465f1b8695e086020df1240d0d0d7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add more overflow checks from the sample code in RFC 3492.
Also check if a code point to be inserted into output is in
the allowable range for Unicode.
Rewrite all overflow checks to use {add,mul}_overflow()
functions.
Do not try to process any inputs that are too long to be
part of a valid domain name label.
This fixes a test in tst_qurlinternal.
Fixes: QTBUG-95689
Pick-to: 6.2
Change-Id: Ice0b3cd640d8a688b63a791192ef2fa2f13444be
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Take the rvalue insert() function and turn it into the emplace()
function. Reformulate rvalue-insert using emplace(). Lvalue insert()
is using a different code path, so leave that alone. This way, we
don't need to go overboard with testing.
[ChangeLog][QtCore][QVarLengthArray] Added emplace(), emplace_back().
Change-Id: I3e1400820ae0dd1fe87fd4b4c518f7f40be39f8b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Unlike simplified(), it just moves the end-points, without needing to
modify contents, so it makes sense (as for QStringView and
QLatin1String) to provide it. Moved QByteArray's trimmed() tests to
tst_QByteArrayApiSymmetry so that QBAV can now share them.
[ChangeLog][QtCore][QByteArrayView] Added trimmed().
Change-Id: Ifd7a752adb5f3d3e2ad0aa8220efa7e7d2d39baa
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Return ASCII sequences that start with xn-- but fail Punycode
decoding as is when converting URLs to Unicode. This is consistent
with handling of sequences that do decode successfully but fail other
validity checks.
This fixes one test in tst_qurlinternal.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: I63d7197f25102c96f5dc21d9fecec5e015c531cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test string "xn--l0902716a" encodes 2**32. Currently
the IDNA code returns an empty string when encoding this
to Unicode instead of expected original string.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: I5ce7bcc744c9d5426f66b8a7d0ae76c7c92f552b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use a lambda to simplify testcases for bad IDNs.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: Ia4f3a5dbc73c74968628d89bd64d7aa6692b1c46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When formatting numbers, if the fill character used to left-pad to
field widths is '0', the code delegates that padding to the
QLocaleData's ZeroPadded formatting option. Since we want the zeros
before any minus sign, and don't want to subsequently add more zeros
before it, check that this has worked as expected when calling
replaceArgEscapes(), to confirm that it doesn't need to worry about
that.
Add some tests that verify the expected behavior.
In the process, tidy up the code doing this. Rename a local variable
to match our coding style, split a long line.
Pick-to: 6.2
Change-Id: I7cc430c5bceb006cf4e226bca33da16bd2bb1937
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add two tests for decoding IDNs when they encode values outside Unicode
(> 0x110000).
"xn--5p32g" decodes to "a" (all ASCII) before QTBUG-95577 got fixed.
"xn--400595c" decodes to the same value as "xn--097c" after the above
mentioned bug got fixed. This test is currently failing.
Task-number: QTBUG-95689
Pick-to: 6.2
Change-Id: Icab55c41e0233b34d57e38232fa90ac42f35a50a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Iterate over Unicode codepoints instead of UTF-16 characters
when converting to/from Punycode as described in the specification.
Additionally reject strings with invalid surrogate pairs when
encoding to Punycode, reject strings with any encoded surrogates
when decoding.
Remove expected failure marking from the test for this issue
in tst_qurlinternal.
Fixes: QTBUG-95577
Pick-to: 6.2
Change-Id: I3dd68f95ada6d652e2fa5c0c3118dcfa0a5f4c4d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QMetaType does. QVariant should do the same.
Pick-to: 6.2
Change-Id: I3419276b78b3b5ce8bd144dee92685195797d568
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Daniel Nicoletti <daniel.nicoletti@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use U+102F7 as an example. The current code is not able to handle conversion
of Unicode codepoints outside BMP correctly, so mark the test as expected
failure.
Task-number: QTBUG-95577
Pick-to: 6.2
Change-Id: Ifd50cf306bce4940f84cb412de148eac952e6c09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Oliver Wolff reports that this test no longer hangs on Windows; and
the other plafroms for which it was skipped are no longer supported,
so remove the #if-ery that skips this test for platfroms on which
uncompressing corrupt data used to hang.
Change-Id: I94a3fd4b83338fe6e3a97ab055fe05e2f15b6b45
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Move out and share the test data from the QString::number_double() test
and re-use it for this one.
Task-number: QTBUG-88484
Change-Id: I6502d1d360657f6077e5c46636f537ddfdde3a83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was producing a warning about the invalid test, for which
replace_regexp() had anticipated that warning; do the same in
remove_regexp(). The two tests shared a date() method, but the remove
test was a no-op on the tests with non-empty replacement text; move
the column set-up and data rows with empty replacement to remove's
data() function, from replace's, and reverse the direction of calling
each other between data() functions, so each test gets the cases that
are relevant to it and no spurious PASSes happen for no-op tests. In
the process, give moved test-cases informative names; relocate the
(entirely re-written) remove data function to beside its test; and
eliminate a pointless local variable from both tests (it used to be
needed when testing both QRegExp and QRegularExpression).
Pick-to: 6.2
Change-Id: I93dcfc444f984edf5c029f99306aff6bc95d554a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code to work around setlocale() mis-describing en_US as C ensured
that we didn't accept the C test-cases when the locale was really
en_US; but neglected to accept the en_US test-cases when the locale
really was en_US but was misdescribed as C. This lead to no tests
being run when the locale was en_US.
Tweak the logic of the test filtering to compare the wanted locale
against the system locale both when C is wanted and when it isn't.
Make the skip-messages a little more informative.
Pick-to: 6.2 6.1
Change-Id: I4e072e12819144b2941b87a5f486534047d9a579
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows up on commit 98666c8afc,
which did the same for QString. If someone wants to get formatting
suitable to an unsigned value, they can cast the value to that
unsigned type and the correct overload shall pick it up.
[ChangeLog][Important Behavior Changes] QByteArray's formatting of
negative whole numbers to bases other than ten now, like QString's
(since Qt 6.0), formats the absolute value and prepends a minus sign.
Task-number: QTBUG-53706
Pick-to: 6.2
Change-Id: I91fee23d25ac0d5d5bcfcbeccbac1386627c004a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- avoid calls to private and virtual functions, if the device is not
open;
- avoid repetitive checks in loops;
- add missing checks in readLine() overloads;
- remove check against unsuccessful resize().
Change-Id: I973d5931163b25db1c09c7c3b66f29ea90bb1b29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Remove the QString/QStringView/QLatin1String/const char* overloads
from the API, but not the ABI.
As a drive-by, replace a use of QStringView::left() by truncate(), as
suggested by a comment.
[ChangeLog][QtCore][QUuid] The from-string constructor and the
fromString() function now take QAnyStringView (was: overload set with
a subset of QString, QByteArray, const char*, QLatin1String,
QStringView each).
Change-Id: If7fa26cfbef9280480c78b669d9f5f14118995ed
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Formatting using scientific notation with extra precision wasn't tested
Change-Id: I7a89a0f3d6468515604e43e52fc366dedf3c39ea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed string.
Apart from that, many other tests are added to extend code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: If86ef3d8611a678798b1bcc60a1a4f5598fd2179
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch fixed two bugs in indexOf/lastIndexOf:
1. The lastIndexOf(char, qsizetype) overload was crashing with an empty
QByteArray. It was unconditionally calling lastIndexOfCharHelper()
which assumes that this QBA is not empty. An explicit check for
the empty case is added.
2. The indexOf(QByteArray, qsizetype) overload was behaving incorrectly
while searching for an empty QByteArray. In this case it
unconditionally returned its second parameter (from). However, from
can be negative, or even exceed the size of this QByteArray. This
patch handles this cases properly.
As a drive-by: this patch adjusts the QByteArray::indexOf(char, qsizetype)
and QByteArray::lastIndexOf(char, qsizetype) overloads to match with the
QByteArrayView implementation. This is done to have similar code paths
in both cases and avoid tricky bugs in future.
Ideally we had to adjust the QByteArrayView implementation, but it's
fully inline, so can't be changed without breaking BC.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Iaef2fdc5b99cce6aa342cca2d17544a1ad7ca677
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There are few slots whose lambdas are empty; most will at least
capture [this]. But there are a few in Qt examples that do, e.g. []{
qApp->quit(); }. Logging is also an example. So go the extra mile and
optimize for empty functors by inheriting from them as opposed to
storing them in a member variable.
Change-Id: I3904f10db5ebe904ba889d29c08569edd804df3b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QString itself can be compiled without QRegularExpression, but
the tests do not check if they are supported or not.
This patch fixes the issue by introducing the proper #ifdef guards.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I797691f78a34d4f78a86af99c78bf06e26e846d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
C++20 deprecated compound volatile statements such as pre- and
post-increments, to stress that they're not atomic. So instead of
volatile i;
~~~~;
++i;
you're now supposed to write
volatile i;
~~~~;
int j = i; // volatile load
++j;
i = j; // volatile store
which matches more closely what hardware does.
Instead of fixing every use of volatile pre- or post-increment in this
fashion individually, and realising that probably a few more Qt
modules will have the same kind of code patterns in them, write
QtPrivate functions to do the job centrally.
Change-Id: I838097bd484ef2118c071726963f103c080d2ba5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before this change, next() was the only way to advance the iterator,
whether the caller was ultimately interested in just the filePath()
(good) or not (bad luck, had to call .fileInfo()).
Add a new function, nextFileInfo(), with returns fileInfo() instead.
Incidentally, the returned object has already been constructed as part
of advance()ing the iterator, so the new function is faster than
next() even if the result is ignored, because we're not calculating a
QString result the caller may not be interested in.
Use the new function around the code.
Fix a couple of cases of next(); fileInfo().filePath() (just use
next()'s return value) as a drive-by.
[ChangeLog][QtCore][QDirIterator] Added nextFileInfo(), which is like
next(), but returns fileInfo() instead of filePath().
Change-Id: I601220575961169b44139fc55b9eae6c3197afb4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The number(double) testing done in tst_qstring was a bit lacking,
so other tests (like tst_uic) had to be run to properly test changes.
Task-number: QTBUG-88484
Change-Id: I2fc6cba27788ab4fab6d625257f35868e2b684e3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We missed the chance of deprecating them in 5.15, so
they'll just add to the pain of porting to 6.0. We
should not keep them around forever, though; QMap isn't
random access and so its iterators should only have
bidirectional APIs.
Pick-to: 6.2
Fixes: QTBUG-95334
Change-Id: I3577f7d25e8ab793722d2f220fd27bc85c622b0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QHash::squeeze() was unconditionally calling reserve(0), which is
always allocating memory (even for 0 size).
This was leading to a confusing situation when calling squeeze() on
a default-constructed container with 0 capacity() actually allocated
memory. This is very misleading, as squeeze() is supposed to free
unneeded memory, not to allocate more.
This patch adds a check for non-zero capacity. As a result, nothing
is done for default-constructed container.
Note that this patch also affects the QSet::squeeze() behavior, because
QSet uses QHash as its underlying data type.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ib1c3c8b7b3de6ddeefea0e70b1ec71803e8fd3b3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
When inserting items into the result store, a ResultItem is created,
which stores a pointer to the results list and their size. If the size
of the ResultItem is set to 0, it means that a single result is stored.
In case of trying to report results via an empty list, the size is 0, so
result store treats it as a single result.
Added checks before storing the results to make sure that the result
list isn't empty. Note that empty lists are allowed in some cases for
the filter mode, because ResultStoreBase::addResults() knows how to
handle those cases correctly.
Task-number: QTBUG-80957
Pick-to: 5.15 6.1 6.2
Change-Id: I399af4c3eef6adf82fea5df031fe9a9075006b1f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit c19695ab95.
Just because QSet has limited API doesn't mean we can't provide this
in an efficient way for std::unordered_set :P
Added tests.
Pick-to: 6.2
Change-Id: I4f8f0e60c810acdc666cf34f929845227ed87f3b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In two cases, it was as easy as replacing an unnamed enum's values
with constexpr variables. In the case of QSimplex, I opted for
qToUnderlying(), as the enum made sense on its own.
Change-Id: Ifcf5be14bd2f35e50adabdbd7ecdb2e83f6bf5b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed container.
Apart from that, many other tests are added to extend code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Icc1f1342738603c9bed065b2a36c72ea60b48962
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
All the getters of QFutureWatcher are consistent with the getters of the
corresponding QFuture, except for the isFinished() method, which returns
'true' only after the finished() signal is delivered. This behavior
might be unintuitive for the users. In particular, isFinished() returns
'false', even if it's called immediately after waitForFinished().
[ChangeLog][QtCore][QFutureWatcher][Important Behavior Changes] The
QFutureWatcher::isFinished() method now indicates if the related
QFuture is finished, instead of indicating if the finished() signal was
delivered. This makes it consistent with the future that is being
watched.
Fixes: QTBUG-91048
Pick-to: 6.1 6.2
Change-Id: I6ae9b882b23e06198a82c95b026491bd480b3bf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ie57b5d13fad9a846c29c87be4985c87e69bba305
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch introduces some test improvements to check the calls of
different methods on an empty default-constructed string.
Apart from that, some other tests are added to extend code coverage.
As a drive-by:
* fix int -> qsizetype in the test data
* fix int -> enum in the test data
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: I159473b7f5dcbea1bdaf2966979e066296351208
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
While QFileSelector is documented to work on files, select accepts
arbitrary URLs. Moreover, the QML engine can end up intercepting
arbitrary (user provided) URLs, including to directories.
Prior to this change, passing "file:///" or "/" to the function would
break: We would temporarily get a "//" path, which is invalid, and thus
we would return an invalid in the end.
Prevent this by only appending a slash to the path when it doesn't have
one.
Fixes: QTBUG-85410
Pick-to: 6.2
Change-Id: I1d2807a9d225df611c3a5e871e3c1d90a6a25953
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
Extend tests to explicitly check the behavior of empty
default-constructed containers.
Also add some missing tests for the existing methods
(mostly for QMultiHash) and correct some end()s to cend()s
in comparisons.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ic9e1b86ef67f6bca2751a65a8589b2f7e0ebb5ea
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test causes frequent failures in the CI. Couldn't reproduce on
actual arm64 hardware, so it's likely to be a QEMU bug. From the
available logs it seems that all the test cases are flaky (there's a
failure even after cleanupTestCase() is called), so disable all of them.
Fixes: QTBUG-94737
Pick-to: 6.1 6.2
Change-Id: I783ec2179ba779a2c8d93351a78e8472a4f7a907
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch mostly introduces some test improvements to check the
calls of different methods on an empty default-constructed
container.
Apart from that some other tests are added to extend test
coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: If2bc96158462292bbdf8504942141af94568c729
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Add tests to verify parser behavior with locales that use code points
outside of Unicode BMP to represent dates. ccp is used for this because
Chakma language uses code points outside of BMP for both letters and
digits. QDateTimeParser currently is not able to handle this locale
correctly, so the tests are marked as expected failures.
Task-number: QTBUG-87111
Change-Id: I1cc6fe7304b47f19950ae0ad3179c4ffa946adb3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The use of a freestanding function is not needed now that the name
doesn't alias the nativeInterface accessor function, and was just
adding complexity to the machinery.
People not familiar with the code will have an easier time following
the flow through the helper member function, and we no longer need
to declare our own export macros.
Pick-to: 6.2
Change-Id: I17530b7e89939cfc19ab8ffaa076b7129ae02dcf
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Extend tests to explicitly check the behavior of empty
default-constructed container.
Also add some missing tests to increase the code coverage.
Task-number: QTBUG-91736
Pick-to: 6.2 6.1
Change-Id: Ib3c3f5bcb967cd1031cb24ffceaa77a146212ffd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
In QItemSelectionModel, items which are disabled or marked as not
selectable should not be considered as selected. But this was
not handled consistently.
The following methods considered only items which are enabled and
marked selectable: selectedIndexes(), rowIntersectsSelection(), and
columnIntersectsSelection(). The following methods considered only
items which are marked selectable, but did not check whether they
are enabled: selectedRows(), selectedColumns(), isRowSelected(),
isColumnSelected(), isSelected(). Finally there is hasSelection(),
which did not check for enabled nor for selectable.
This patch introduces consistent behavior. All methods check
both whether the items are enabled and whether they are selectable now.
[ChangeLog][QtCore][QItemSelectionModel][Important Behavior Changes]
All methods in QItemSelectionModel now consider only items which
are marked as enabled and selectable as part of the selection.
Fixes: QTBUG-93829
Pick-to: 6.2
Change-Id: I4725243ea6b0db4f289ce34ada22c7a9d3282713
Reviewed-by: David Faure <david.faure@kdab.com>
The maximum size for a hash result is 64 atm. Even if, and esp when,
we'll get to 128 and 256 bytes in the future, there's no reason to use
dynamic memory, because the sizes will always be statically known.
So use, essentially, a std::array<char, 64> to hold the result
internally. Add a bit of convenience API on top to limit impact on the
rest of the code and add a few static_asserts that ensure this is large
enough. Then give users access to the internal buffer by adding
QByteArrayView resultView() const noexcept. The documentation snippet
is taken from QString::data(), suitably adjusted.
Use resultView() in a few places instead of result().
[ChangeLog][QtCore][QCryptographicHash] Changed to use a
statically-sized buffer internally. Added resultView() to access it.
Change-Id: I96c35e55acacbe94529446d720c18325273ffd2f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It timed out the other day on the CI. Even the SHA-1 check took 137s
(with a 300s timeout). Skip the SHA-512 test on the CI, but keep it
for manual runs.
Pick-to: 6.1 6.2
Change-Id: I49792ac9bcab6512e1803f66cd986b2830e634c0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
