They're pretty much the same, clearly a copy & paste. Instead, merge the
two codepaths so that we don't run the risk of applying a change in one
part and forgetting the other.
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b737560f6753be
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Each application will have one thread dedicated for this, for all
QDBusConnections. I wouldn't mind sharing such a thread with other uses
in Qt, provided none of them ever block (the QProcessManager thread
comes to mind, but it's going away soon).
The cost associated with this change in this commit is so far rather
minimal. All incoming D-Bus calls need to be handled after an event is
posted anyway, to avoid deadlocking on reentering libdbus-1 functions
that acquire locks still held. The cost is the one more thread running
and the cost of synchronizing them when an event is posted.
The benefits far outweigh that cost: no longer will we have problems of
QtDBus failing to run if the main system or session connections are used
before QCoreApplication is run. Moreover, events can be received and
handled in aux threads even if the main thread is blocked on some
operation.
Note: this commit may not be testable (tst_qdbusconnection may fail)
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b737556ccd11a8
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This simplifies the code a little by having a single code path. More
importantly, we no longer need to call the evil function
dbus_connection_send_with_reply_and_block. That function acquires a lock
on the socket transport inside libdbus-1, which means all threads need
to wait until the one call gets unblocked before they can continue.
To do that, this commit reimplements the QDBus::Block part of
QDBusConnectionPrivate::sendWithReply by reusing the existing call to
sendWithReplyAsync() and then doing a blocking-wait with
QDBusPendingCallPrivate::waitForFinished().
By using (Q)DBusPendingCall and the threaded connection approach (next
commit), now we never block on the socket. That also means the code to
call dbus_pending_call_block() is no longer necessary and the
waitForFinished() function itself can be considerably simplified.
As a side-effect of no longer blocking, a number of pre-existing race
conditions that used to be hidden showed up.
Note: this commit deadlocks without the threading (next commits).
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b73754954a3f7d
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
It used to return the sent message's serial ID, but we never used that.
So simply use boolean instead.
Change-Id: Ic5d393bfd36e48a193fcffff13b73753ccf47759
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Albert Astals Cid <aacid@kde.org>
The cost of connecting a signal may be a bit high, but it's comparable
to looking up the invokable method. However, QMetaMethod::invoke has a
higher cost than a signal-slot emission -- though in any case they're
both dwarfed by the cost of allocating the QMetaCallEvent and the
posting of it.
This is much more readable, though.
Change-Id: Iccecbecbe6288fb3b6d16578fdff3f203b6db29c
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Albert Astals Cid <aacid@kde.org>
This is because the socket activity will move to a different thread;
QDBusConnectionPrivate* can be queued, QDBusConnection can't easily.
Change-Id: I82722016018b7fcfb246cda6043469fadbfd987d
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Instead of connecting to the "NameOwnerChanged" signal. This has better
performance, is simpler to implement and is future-proof: when we switch
to kdbus, there won't be a "NameOwnerChanged" signal to connect to. On
the drawback side, this will use slightly more memory.
Change-Id: I5801b8027949f041309567a493000fe7de9bf227
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Albert Astals Cid <aacid@kde.org>
We increase the reference count of the connection during delivery of an
incoming message, so it's possible that the corresponding deref will
drop the last reference to the connection: another thread may have
called disconnectFromBus/Peer. However, during destruction we try to
drain the incoming socket queue, so we need to acquire the dispatch lock
again.
The solution is to always use deleteLater(), which means the
deleteYourself() function is unnecessary.
Change-Id: I27eaacb532114dd188c4ffff13d507039fcf7b6a
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
- Remove unneeded member variables.
- Use new connection syntax in createActions()
to assemble the menu there, removing the createMenus()
function.
- Use a QButtonGroup for the sizes with the style metrics as id.
- Streamline code, rename variables for clarity.
- Introduce static functions returning the list of states/modes and
their names in display order to IconPreviewArea, removing the
duplicates.
- Split actions to open sample icons provided from source directory
or standard pictures location to make sample icons more prominently
visible.
- Check and display @2x images and add tooltips showing device pixel
ratio and actual size.
- HighDPI: Add groupbox displaying screen name and device pixel
ratio, connect to screen changed signal and update icons panel
accordingly. Add check box for toggling Qt::AA_UseHighDpiPixmaps.
- Adjust documentation
Task-number: QTBUG-18680
Task-number: QTBUG-46615
Change-Id: Ice96e9898f168ef2a30e9f46cb260ed57ae015f0
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Fixes GPU memory leak when window is created/deleted dynamically and
repeatedly. EGL context used to own EGL surface, but the context
outlives the surface if window is created/deleted dynamically. The
EGL surface is now owned by the window and destroyed with it.
Change-Id: Ib949261ef6e77217018e60aad3e36e4a6d2eaba0
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
The use of ccache leads to QMAKE_CXX definitions of the form:
QMAKE_CXX = $${CCACHE} $${CROSS_COMPILE}g++
The previous test required QMAKE_CXX to be a single valid (absolute or
QMAKE_PATH_ENV-relative) path to an existing file, which was not
compatible with definitions of QMAKE_CXX like the one above.
Fix this by using only the first value in QMAKE_CXX, which usually
points to the compiler executable, or to the ccache executable in the
above case.
Task-number: QTBUG-47951
Change-Id: Iade3136f03493593b067fb7742fb997f92377425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Introduce the methods setError(), setErrorAndEmit() to consistently
set the internal error state.
Change-Id: I4ff951d100cf5e9f9a7e27135bb52188cde99853
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-no-opengl is not a supported option when compiling for WinRT or Windows
Phone. Hence bail out early to avoid compilation errors at later stage.
Task-number: QTBUG-48041
Change-Id: I449b8935b95f0b75139a0f7bfa13256ea3fe95e5
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Calling constScanLine() is an extra function call, just for doing
"data + y * width". Also, we are checking d again, even though we
already know it's there.
The constScanLine() call is responsible for up to 15% of the total
CPU time spent in pixel().
Change-Id: Ia7a8e0a6d62fb257d1b22d91f062b66e9cfd349a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Windows Runtime port supports non-fullscreen and multiple windows.
Change-Id: I6f4791a7c329ece88e5f6f9910f3635a7bfef3f8
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
If no_generated_target_info is not set, VERSION is set, and
there is no .rc file that belongs to the project, qmake creates a
.rc file that contains information about the target's version
and copyright, for example. This resource handling is also
supported by WinRT and we can add this information to the target.
On Windows Phone, winresrc.h (which is needed for resource
handling) is not available though. When trying to add a .rc file
to a project in Visual Studio, it also complains about winres.h
not being available. Instead of hacking around the issue, we
just should not support this behavior on Windows Phone.
Change-Id: Ie962bfa790916fed23294110062e3572a0e317f9
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Inside Visual Studio these files (INSTALLS) will end up in deployment.
They do not make sense there and might even cause clashes, which prevent
the project file from being loaded (for example when a qrc file is added
to "Resource files" and "Deployment files")
Change-Id: Ifa68c52a83b2bf3948738c7aa1cf9c56b331dc80
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This symbol will exist with different ELF versions, allowing us to know
which version of Qt a given library or application was linked
against. When this symbol gets used, automatic packaging tools will
extract the dependency. The trick here is that the application uses
qt_version_tag without knowing which version is current, but the linker
resolves it to the current version and records that.
For example, if this were used with Qt 5.5, RPM's find-requires on an
application using QtCore would print:
libQt5Core.so.5()(64bit)
libQt5Core.so.5(Qt_5.5)(64bit)
libQt5Core.so.5(Qt_5)(64bit)
Whereas find-provides on QtCore would print:
libQt5Core.so.5()(64bit)
libQt5Core.so.5(libQt5Core.so.5)(64bit)
libQt5Core.so.5(Qt_5.0)(64bit)
libQt5Core.so.5(Qt_5.1)(64bit)
libQt5Core.so.5(Qt_5.2)(64bit)
libQt5Core.so.5(Qt_5.3)(64bit)
libQt5Core.so.5(Qt_5.4)(64bit)
libQt5Core.so.5(Qt_5.5)(64bit)
libQt5Core.so.5(Qt_5)(64bit)
Therefore, automatic dependency resolution would have the information it
needs to conclude that the application requires Qt >= 5.5.
Change-Id: I049a653beeb5454c9539ffff13e3fec9aeb50197
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This linker script is only enabled for systems with GCC or GCC-like
compilers, though technically it should work on the BSDs too (will
enable after testing). For regular modules, this declares one ELF
version "Qt_5" and places all QtCore symbols inside, then it declares
unused ELF versions "Qt_5.x" for each older minor release. For modules
declared "internal_module", all symbols are placed in version
Qt_5_PRIVATE_API.
The big advantage of an ELF version is that, when we do Qt 6, both
versions of QtCore could be loaded in memory without conflicts and all
symbols would be resolved to the correct library. No module can talk to
both at the same time, but this avoids mistakes of loading them
indirectly by plugins.
The extra Qt_5.x versions will be used in the next commit.
Change-Id: I049a653beeb5454c9539ffff13e3fe6f050fdf31
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Windows Vista, the OS keeps an extra set of names for each
interface, which are identifier-like and more friendly than previously,
but not the user-description.
For example:
previous name: "{2B09D370-A032-4478-8444-495AD9301D67}"
new name: "wireless_6"
friendly name: "Local Area Connection* 12"
Change-Id: I7de033f80b0e4431b7f1ffff13f995f983689f06
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The has been present since Windows 2000 and most functions we need have
been present since Windows XP and Windows CE 5.0. There's no need to do
runtime detection anymore.
This was necessary in Qt 4.2, when this code was introduced, because we
still supported Windows 98 and Me, including Windows platform SDKs that
lacked the necessary header definitions.
Change-Id: I076d1e8bbd53469a24fad72cf58b1905e737f52a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Future-proofing against a future version of the Linux kernel adding a
"FooTracerPid:" before the TracerPid entry.
Change-Id: I42e7ef1a481840699a8dffff140347457902900f
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Calling height() causes an additional function call and check for d
which sums up to more than 25% of the total CPU cost of pixel() if
the format is simple.
Change-Id: I449a3a17dc031e607e40dc1577a5553e7490de76
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
I'm going to need the extra bits for x86.
Change-Id: Ib306f8f647014b399b87ffff13f1d3d23e138518
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Trying to link to QML signal documentation failed when the link
string ends in parentheses:
\l someSignal()
This commit fixes the issue by adding QML signals into the list
of primary functions, making it thereby available for
findFunctionNode() method.
Change-Id: Ib5a8325cd18171cdea392bcc1af676efe373f433
Task-number: QTBUG-48158
Reviewed-by: Martin Smith <martin.smith@digia.com>
When using Xcode7 (beta 6) "xcrun simctl list devices" will also list iWatch
devices. So we need to filter them out so we don't end up picking one
when building and running auto tests.
This will fix a build failure when building Qt with latest Xcode7.
Change-Id: Ie40489d670298ec75332a6c2b54565d55e9dbbba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The system tray example initially was in QtSvg after the Qt 5
modularization split since it depended on it. In the meantime, it
has been moved back to qtbase.
Fixes qdoc warning:
qtbase/src/widgets/util/qsystemtrayicon.cpp:56: warning: Can't link to 'System Tray Icon Example'
Change-Id: Ie3c13baf4ac91ecf0c814885f71ac44dc05b427c
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
qtbase/src/gui/painting/qrgba64.h:107: warning: No documentation for 'QRgba64::isOpaque()'
qtbase/src/gui/painting/qrgba64.h:112: warning: No documentation for 'QRgba64::isTransparent()'
qtbase/src/gui/painting/qrgba64.h:121: warning: No documentation for 'QRgba64::setAlpha()'
qtbase/src/gui/painting/qrgba64.h:119: warning: No documentation for 'QRgba64::setBlue()'
qtbase/src/gui/painting/qrgba64.h:118: warning: No documentation for 'QRgba64::setGreen()'
qtbase/src/gui/painting/qrgba64.h:117: warning: No documentation for 'QRgba64::setRed()'
qtbase/src/gui/painting/qrgba64.h:163: warning: No documentation for 'QRgba64::operator=()'
Change-Id: Ic6f6a8415b8ad33917e460737824fc8856776de1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
qtbase/src/gui/text/qzip.cpp:797:warn:Cannot find 'FileInfo::d' specified with '\variable' in any header file
qtbase/src/opengl/doc/src/qtopengl-index.qdoc:28:warn:Can't link to 'Qt Gui'
qtbase/src/opengl/doc/src/qtopengl-module.qdoc:28:warn:Can't link to 'Qt Gui'
qtbase/src/widgets/widgets/qcombobox.cpp:3033:warn:Cannot find base function for '\reimp' in showPopupFromMouseEvent()
qtbase/src/corelib/plugin/quuid.cpp:849: warning: Can't link to 'variant()'
qtbase/src/corelib/plugin/quuid.cpp:863: warning: Can't link to 'variant()'
qtbase/src/widgets/dialogs/qsidebar.cpp:72: warning: Cannot find base function for '\reimp' in mimeTypes()
qtbase/src/widgets/dialogs/qsidebar.cpp:80: warning: Cannot find base function for '\reimp' in flags()
qtbase/src/widgets/dialogs/qsidebar.cpp:98: warning: Cannot find base function for '\reimp' in mimeData()
qtbase/src/widgets/dialogs/qsidebar.cpp:134: warning: Cannot find base function for '\reimp' in dropMimeData()
qtbase/src/widgets/dialogs/qsidebar.cpp:151: warning: Cannot find base function for '\reimp' in setData()
Change-Id: I39d6494eb8179f0f7532f99458736fa5e30cdc25
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Change-Id: Ie85a4e987eb069d4dd0dbd39860f299a7204b585
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The pixel size passed into QCoreTextFontDatabase::fontEngine() has already
been scaled to take the destination DPI into account. In the normal case
the destination DPI is the same as the screen's logical DPI, 72, and we
end up with the pixel size being equal to the point size. But when the
Qt::AA_Use96Dpi flag has been set, e.g. when running tests, the pixel
size is larger than the point size, and we need to pass this information
to CoreText, otherwise we end up with clipped text rendering. This was
evident when looking at the lancelot baselines for OS X, which are
produced using QTestLib, and hence run with Qt::AA_Use96Dpi set.
Change-Id: Ib0f720bb318b2dc437172a6b712675e3dfe3f7ac
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The latter had the same effect, but is an invalid assignment for a value
that is documented to be non-nil.
Change-Id: Ice00482138481556ad839bc3721e577dafcb26fe
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
66050f2a changed a few exported functions used by testlib so that they
sent events synchronously, by calling QGuiApp processWindowSystemEvent
directly.
The same effect can be achieved by setting setSynchronousWindowSystemEvents
to true before calling the normal QPA functions.
Change-Id: Id4c67f7d315a5607885c738ca54516434125b24e
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Makes it possible to notify that the QGuiApplication::primaryScreen has
changed.
XCB backend adopts the new API, as it was accessing QGuiApplication private
API directly.
Change-Id: Icde05c44138265f865fa42d2cd6974c552fdc5e2
Task-number: QTBUG-38404
Task-number: QTBUG-40659
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
QSignalBlocker is a wrapper for QObject::blockSignals(). Let's add a
cross-reference.
Change-Id: I3e7b7530eef165439965e4f83da308d9384209f3
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Also refactor the multiple usages of the same OS X version
check variable.
Change-Id: I16e4863353670200f8f44478fa18af9a4e875b5f
Task-number: QTBUG-43425
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
When drawing the tab bar text shadow, we call drawControl() on the
proxy style, so we should do the same for subElementRect().
Change-Id: Ic3477d4c053d9cce42abd3f93a4e1bf265f025ce
Task-number: QTBUG-41600
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
qtbase/src/corelib/io/qdebug.cpp:698: warning: Class QDebugStateSaver has no \inmodule command; using project name by default: QtCore
qtbase/src/gui/opengl/qopenglframebufferobject.cpp:1138: warning: Can't link to 'takeTextures()'
qtbase/src/gui/opengl/qopenglframebufferobject.cpp:1159: warning: Can't link to 'takeTextures()'
qtbase/src/gui/opengl/qopenglframebufferobject.cpp:953: warning: No such parameter 'height' in QOpenGLFramebufferObject::addColorAttachment()
qtbase/src/gui/opengl/qopenglframebufferobject.cpp:953: warning: No such parameter 'width' in QOpenGLFramebufferObject::addColorAttachment()
qtbase/src/gui/opengl/qopenglframebufferobject.cpp:953: warning: Undocumented parameter 'size' in QOpenGLFramebufferObject::addColorAttachment()
qtbase/src/gui/painting/qpaintdevice.qdoc:80: warning: Undocumented enum item 'PdmDevicePixelRatioScaled' in QPaintDevice::PaintDeviceMetric
qtbase/src/testlib/qbenchmarkmetric.cpp:154: warning: Invalid use of '\relates' (already a member of 'QTest')
qtbase/src/testlib/qbenchmarkmetric.cpp:81: warning: Invalid use of '\relates' (already a member of 'QTest')
qtbase/src/widgets/dialogs/qdialog.cpp:152: warning: Can't link to 'QCloseEvent::ignore()'
qtbase/src/widgets/dialogs/qdialog.cpp:557: warning: Can't link to 'QApplication::quit()'
qtbase/src/widgets/kernel/qwidget.cpp:8326: warning: Can't link to 'QCloseEvent::accept()'
qtbase/src/widgets/kernel/qwidget.cpp:8326: warning: Can't link to 'QCloseEvent::ignore()'
qtbase/src/widgets/kernel/qwidget.cpp:9300: warning: Can't link to 'QWheelEvent::accept()'
qtbase/src/widgets/kernel/qwidget.cpp:9300: warning: Can't link to 'QWheelEvent::ignore()'
qtbase/src/widgets/kernel/qwidget.cpp:9321: warning: Can't link to 'QTabletEvent::accept()'
qtbase/src/widgets/kernel/qwidget.cpp:9321: warning: Can't link to 'QTabletEvent::ignore()'
qtbase/src/widgets/kernel/qwidget.cpp:9373: warning: Can't link to 'QKeyEvent::ignore()'
Change-Id: I97ae85398181645c1054c303e5c8a87deb619409
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The dependent macro Q_OS_WINRT is not yet in scope when PCH is disabled,
and it was missing parentheses anyway. Use WINAPI_FAMILY here instead, as
it's just as good.
Change-Id: Ib33904a9173f4f262c57ba1c27b37019f12827e7
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
QDoc now handles \keyword slightly differently - it no longer
generates a unique html anchor at the location it appears in.
Instead, it'll inherit the anchor of the documentation item
it appears in.
Therefore, switch the \keyword commands that are used for
linking to a subsection within a page to be \targets instead,
so they'll get an anchor and not link to the top of the page.
Change-Id: Iec6d3f0edbcfb0aec95e222615eca9de2b0e153e
Reviewed-by: Martin Smith <martin.smith@digia.com>
QDoc was searching for nodes using empty target string in some
cases (when the string contained no '::' but genus was set to
either QML or CPP).
This resulted in random nodes being returned from
findUnambiguousTarget(), causing mislinking without any
warnings.
Change-Id: I1bd434ec7470580cf5cb8083c2b74c37ef562473
Reviewed-by: Martin Smith <martin.smith@digia.com>
In order to provide acceptable results for styling the documentation
for rendering using QTextBrowser (instead of a full browser engine),
QDoc needs flexibility in adjusting the generated HTML.
This commit introduces and documents codeprefix and codesuffix
variables for qdocconf, and re-introduces the once-removed
support for codeindent.
The default codeindent value is reset to 0. These changes have no
effect to the generated output unless the above variables are
defined.
Change-Id: I6eb40dc0700725622e5a525ef19b5626b3b2b6a5
Reviewed-by: Martin Smith <martin.smith@digia.com>
If QDoc fails to find a function node for a link target that ends
in parentheses, it must retry to find another type of node, as
page/section titles can sometimes resemble function signatures.
This fixes a regression introduced by commit 8c5ce68f.
Change-Id: I675fe5b93ecc8a1823c0a5f817fb4b80b4e63320
Task-number: QTBUG-47919
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Set screen geometry only for top level window.
For other window types (dialog, popup and etc.) use
their own geometry.
Change-Id: I47e45a9fc6f08587ea284d89d56e419907471572
Task-Id: QTBUG-48089
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
