moving the detection of .qmake.cache to the qmake startup had the side
effect that a suddenly popping up cache would not be picked up by
nested projects any more.
this is not supposed to work in the first place, but the syncqt hack for
building against non-installed modules relies on it. until we have
cleaned that up properly, we need a way to notify qmake about the
appearance of the cache file.
Change-Id: I450646b936e3bb2ef2ed3aba05df58e521ccdc61
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Report https://bugs.webkit.org/show_bug.cgi?id=79561 shows that
this commit will cause significant slow down in text handling
operations. Though the exact reason is unknown we should revert
it first and find out the reason later.
This reverts commit 692064bcfd.
Change-Id: I16a56c3093bdfa2119ab6a6e9049ef2925468e29
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Remove the -armfpa option the config.tests/unix/doubleformat*
detection. The places where we used QT_ARMFPA and Q_DOUBLE_FORMAT
has been removed as well.
Rationale: ARM FPA with GCC does not work with EABI. Qt currently
does not support compiling without EABI, making ARM FPA an
impossibility. It is unknown whether other compilers provide ARM FPA
support with EABI. Support for ARM FPA can be re-added in the future
should the need arise, but since ARM VFP is available for ARMv5 and up,
we should encourage implementors to instead use soft-floats or VFP.
Change-Id: I3671aba575118ae3e3e6d769759301c8f2f496f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This change enables us to instantiate a QFontEngineMulti that takes
the raw font's font engine as its primary engine but can use fallback
engines based on the platform. Since this can be quite expensive, we
defer the query for fallback families' names until it's needed and
we cache the resulting multi font engine.
Change-Id: I390dbc1cb2fe61d56867f29a03f313eb3eb49dc3
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
The purpose of this change is to allow shaping complex
text while using QRawFont.
This is needed for WebKit so that we can switch to
using QRawFont everywhere and be more in line with
what other WebKit ports do.
Since this change slightly bends the aim of QRawFont,
let's reserve this for internal use for now.
Change-Id: I5ec0881f50ce288350bd277570cb5f1fb70c355c
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Causes a new test failure in QGraphicsProxyWidget::updateAndDelete,
expand the EXPECT_FAIL to cover that one as well.
Change-Id: If9da757206445d17510c4fac82a559de7b8c0563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The OS provides the error string in this case.
This gives more information to the developer seeing a generic
error.
Change-Id: Ia03642982f3513ee5a8a9fa98d918e948f8d97a5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
When loading dnsapi.dll as a plugin, we experience crashes because
the calling convention is not specified.
The default is _cdecl, but __stdcall (via the WINAPI macro) should
be used for windows APIs.
Mismatched calling convention results in corruption of local variables,
probably because the stack pointer is incorrect and SP offsets are
used in optimised builds rather than frame pointer offsets.
Since the library has been available since Windows 2000, I don't
think that we need to load it dynamically.
(Unlike the unix version where it isn't part of the LSB)
Also checked that the current release of mingw works.
Task-number: QTBUG-24227
Change-Id: I37c0a6aa0c133799c2a6dd9391ca1435ba2539ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Some drivers use this as a hint to decide on weither to preallocate
mipmap memory or not.
Change-Id: I2fd438a9625b658c7f30fe39a9d63ba5396f9679
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
The test fails if MAKEFLAGS is set up for jom since the test
always uses nmake. Remove MAKEFLAGS from the process environment.
Change-Id: Idaed3cc964832b83c282a59fc5257572c520b882
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Use a _NET_ACTIVE_WINDOW client message instead of xcb_set_input_focus
for activating toplevel windows on xcb.
According to the Extended Window Manager Hints the right way to activate
a top-level window is using _NET_ACTIVE_WINDOW (when it is supported by
the WM). Other approaches like calling xcb_set_input_focus should be
avoided when possible, since the WM cannot intercept them.
Change-Id: I9be4901f56cbcfb563baf73ccd71ff17a9bdc1d2
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
For SSL, this would require an OpenSSL library to be installed.
Change-Id: I2a320e7faf40ef925c90dbe539f912e4a8fc13fc
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
And moved the pageflipper into its own file
Done with: Paul
Change-Id: I0af34075ce8673a66025cb761c0fe4ff6c0ab0fe
Reviewed-by: Jason Barron <jason.barron@nokia.com>
Currently only a small fraction of all the headers are included since only
the headers found in the pro file folder are included.
This is confusing and arbitrary. With this change all the headers are now
excluded from the instrumentation.
Change-Id: If4322421f3b3e5fcd45f006421690eaa6bf645e0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- It was trying to install syslocaleapp sub program as TESTDATA
instead of an application.
Change-Id: I2117d11335bc2fd37a8ccc9a03b0337382f0177f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed remove() test to check the file just removed is gone.
Change-Id: I0b6c176e624134402b5547866064f436ce063f16
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added install of app sub program so it works from install directory
Change-Id: Ia83643519752a3cbb59d6da2aed132d683a94bee
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- subtest not valid if run as root so added a check and skip
Change-Id: Iae993e20f272f9303a75062ef00d22b49df5e84a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Those escape sequences have a special meaning in the XML Schema 1.1
regular expressions, but not in Perl-compatible ones.
An escape sequence that has no special meaning should match the
escaped character itself; this patch fixes QRegExp's behaviour in
that regard (previously, it added a character class matching
nothing).
Change-Id: I983f923baa7c2ec19938b96353f3a205e6c06d58
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code fails to compile with the below error:
qcryptographichash.cpp:55: error: conflicting declaration 'typedef quint64 uint64_t'
/usr/include/sys/types.h:99: error: 'uint64_t' has a previous declaration as 'typedef __uint64_t uint64_t'
FreeBSDs types.h defines the used defines. Maybe it would be less
ugly to switch the code to quint*, or use a define to do so, or to
have basic os detection for stdint.h, not to include sys/types.h.
Change-Id: Ic62ae4b742c1123b4b7e17158d216374e609f59f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This adds support for XCode 4 into qmake and also indirectly fixes a
couple of problems that are relevant for XCode 3.2 too
Task-number: QTBUG-17247
Change-Id: I722470ad1854bd740cbbd28ff4956057a0e1906b
Reviewed-by: David Forstenlechner <dforsten@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
(cherry picked from commit b5871311457ca97816c0abbb8b935570bbfb657c)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Windows unhelpfully writes to only one byte of the output buffer
when getsockopt is called for a boolean option. Therefore we have
to zero initialise the int rather than initialising to -1 as was
done before.
This in general only works for little endian architecture, because
the word would look like 0x01000000 on big endian. So I have added
some compile time asserts in the assumption that windows is always
little endian. This is ok for comparisons with 0/false, but not
comparisons with true or nonzero values.
In the case of IPV6_V6ONLY, it is documented as DWORD (unsigned int)
but on some windows versions it is returned as a boolean triggering
the warning. I removed the warning, as the conversion to int works on
both LE and BE since it is only compared with zero.
Task-number: QTBUG-23488
Change-Id: I3c586d1ada76465fc045a82661f289920c657a4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
It's not faster under _any_ metric than the new algorithm, and it loses a lot of
spread which is a bad thing.
Change-Id: Ic87258f1c887822ffea1cb1517355564fabc3c26
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
We must do this the same way we do all other hash algorithms for fair
comparison, as otherwise, the call to the PLT unfairly penalises
QHash<QString>'s results, as it's in a different shared object.
Change-Id: I69c891f5a97dcccdfcfbdbf32796f86242a42963
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Per the comments on Ie4100a1ca4dbe7bf1cd73de883a9854377ac2f5e, having Q_ASSERT
was not a good idea, and data functions can't really handle
QVERIFY/QCOMPARE/etc, so do this in initTestCase instead.
Change-Id: I19e61dec7fe415bb1fa0f53a2920d99b8c7c8ea7
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Similar to the UUID benchmark, but won't have any non-numerical characters.
Change-Id: I7487c97cab96fd53c180fe12061e7be3ca96e883
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This attempts to emulate a dictionary usecase of sorts, done in code to avoid
bloating the git repository by adding an actual word list.
Change-Id: I878bc4af8877ba780ee699932f240c0d9c8ff12c
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Make qDebug work again with the new logging framework.
Change-Id: Ib88a83182429636b274d6284933d5ea00db7279c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Give QPlatformDrag a synchronous drag() function returning
the Qt::DropAction
- Move the base functionality for asynchronous event handling
to the platformsupport library as QBasicDrag (extendable base class
handling drag icon and providing new virtuals) and QSimpleDrag
(sample implementation for drag within the Qt application).
- Change the Windows implementation accordingly.
- Change XCB to be based on QBasicDrag.
- Clean up QDragManager.
Change-Id: I654f76f0e55a385ba189bd74f3ceaded6a8fe318
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
For some reason, hiding files via executing "attrib +h filename"
process didn't work realiably, so changed the file hiding to be done
via Windows native API.
Also changed the test to use QTemporaryDir to simplify temporary
directory handling a bit.
Task-number: QTBUG-24291
Change-Id: I4f02b16e2f9105bcf5e6c5bf136f55434a26e2f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Only test code change, we already have the correct behaviour
Task-number: QTBUG-20001
Change-Id: I2296f405f47f9c8d15796e69f9d1854063e38d6a
Reviewed-by: Richard J. Moore <rich@kde.org>
This made sense only for Symbian where there was a special
CFbsBitmap-based backend present and it was used from the
Symbian-specific VG and GL pixmap implementations.
The generic version is merely a useless wrapper over QImage and is not
in use anywhere in the codebase.
Change-Id: I1dabe22dfb8cbbc35dce8e22703a3aff810fb5f9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Was missing a variable declaration and an explicit cast.
Change-Id: I4f0fb9c3d9b8472adf0d91036442adc1fe255c7e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Use temporary directories to avoid instabilities
due to remains of previous failed tests and locked
directories.
- Replace SRCDIR by QFINDTESTDATA(), reference only
the freedesktop.org.xml contained in the Qt source
tree by $$QT.corelib.sources.
- Improve some error messages, test suite instructions
for Windows.
Change-Id: Idee8e3767ef0a8299df3bdaaac20334164878db0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Prior to this change, explicitly passing -qpa to configure breaks compilation on Mac. This is due to a false dichotomy between MAC/QPA
Change-Id: I52cacf96ae8d8d203787f9bbade417f2c55ab3f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This should make it less confusing for people building Qt 5 on Linux.
Change-Id: I3aa7151f790587d5944c837d701b1b1b580b4bc3
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
It's arbitrary and confusing to put a message(OpenGL support is enabled)
in this one OpenGL example and no others, especially since the message
is output during configure.
Change-Id: I7b55868d10c288f3459a7fda594fea1e6f45bf9a
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
The private git history shows that the test program associated with this
data file was missing from the original commit and was never
subsequently added.
Change-Id: I3401724ac04168158a48eb06436db83d3557711f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
A previous patch ensures that we have exactly one section in a Span.
( see SHA : b800d8b94a )
Therefore we no longer need the sectionCount variable. We have
assess to it through the sectionSpan.count. To keep this patch
quite simple the variable sectionCount has been changed to a
function returning the count value.
Change-Id: Ibc419eafa38ab64b08f93074cb6ae4b8518995f6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
