The CLDR data contains eight locales with numeric territory codes, 001
for World, 150 for Europe and 419 for Latin America. The last was
already known in our enumdata.py, but as "Latin America and The
Caribbean", which is not supported by the CLDR, so I've amended it
while adding the other two. This gives us support for Esperanto and
Yiddish (among others).
[ChangeLog][QtCore][QLocale] Added support for World and Europe as
(numeric) "country" codes ("territory" in CLDR terms), thereby
enabling support for Yiddish and Esperanto, among other locales using
such codes.
Task-number: QTBUG-57802
Change-Id: Ibb1180fb720743a3a0589527649d10f3c9cd123d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests kludge round Apple's use of GMT+1 and GMT+2 as names for
CET and CEST on Darwin; but 10.13 actually gets the names right, so
side-step out of the kludge when on this version or later.
Change-Id: Icb8a2f3ac30f0f621a19042dc03e0d281782dd41
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
They have a separate type that we can't recognize directly, but we
can check if we can recognize the QFlags<T> form, though we have to
add a lot of template-conditions to avoid triggering QFlags static
asserts.
Change-Id: I00853682c5376dd3cc411ff151f47bce2389e277
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Adds support for 16bit per color image formats in QImage. This makes it
possible to read and write 16bpc PNGs, and take full advantage of the
16bpc paint engine.
[ChangeLog][QtGui][QImage] QImage now supports 64bit image formats with
16 bits per color channel, compatible with 16bpc PNG or RGBA16 OpenGL
formats.
Task-number: QTBUG-45858
Change-Id: Icd28bd5868a6efcf65cb5bd56031d42941e04099
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Adds an enumName to QMetaEnum to carry the name of the enum since for
flags that doesn't match the name of the Qt type, but is needed if the
flag is scoped.
Change-Id: I1c0f77eb9e40e6fd1eb6a59bea77caf0f33fcf43
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Test that we don't silently replace an invalid TLS configuration with
the default one (for now, the only thing that is considered to be
non-valid - is having non-DTLS protocol set).
Change-Id: I6f714b009cf1345a085a3f26d638fc31330f1a94
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This autotest fails on Ubuntu 18.04.
Task-number: QTBUG-69892
Change-Id: I3673d06f06fcd8db307fc53c27724b227978f20d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A weird behavior of the DTLS server example, when linked with 1.0.2,
exposed that client code, requesting an invalid protocol (for example, SSLv3)
can end-up with connection encrypted with DTLS 1.2 (which is not that bad,
but totally surprising). When we check the protocol version early in
setDtlsConfiguration() and find a wrong version, we leave our previous
configuration intact and we will use it later during the handshake.
This is wrong. So now we let our user set whatever wrong configuration they
have and later fail in TLS initialization, saying -
'Unsupported protocol, DTLS was expected'.
Auto-test was reduced - the follow-up patch will introduce a new
'invalidConfiguration' auto-test.
Change-Id: I9be054c6112eea11b7801a1595aaf1d34329e1d2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The QTRY_VERIFY was needed because the window doesn't initially have a handle,
and QTest::qWaitForWindowActive(QWidget *) only checks the active state of the
widget if it does, returning false if not.
This broken logic should be fixed, but for now let's make it clear what's
actually going on by using an explicit wait for the window handle.
Change-Id: I6dd89e0894efed14f4b9a2562dfe8ca76b5ef89c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test was un-blacklisted in 4050ee6ac7
but apparently it is still not stable.
Task-number: QTBUG-69666
Change-Id: Iaf933ee27d54ebbfa52d0a8d7b1def0ca91808e7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It's useful to know how many times the signal was emitted, because it
gives us insight into why the test may have failed, especially when
it's difficult to reproduce.
Task-number: QTBUG-69492
Change-Id: I94796ed880512b060e0a724c87edde8c3b91bb7c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Tests could change this property, and since the majority of the tests
share testWidget instead of creating local instances, we should be
thorough when cleaning up.
Change-Id: I6039fb6857f4f788f809b1d1fd491b4ef34923ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The majority of the test reuses testWidget. While this may be faster
than creating a QDateTimeEdit instance on the stack for each test,
it introduces issues when certain properties aren't unset when cleaning
up. This happens easily when new tests are introduced which rely on
certain properties, for example.
Rather than making the newly introduced step-modifier-related tests
use testWidget, this patch goes with the simpler option of hiding
testWidget, just like other tests currently do.
Eventually we should probably switch to using local instances
everywhere.
Task-number: QTBUG-69492
Change-Id: I4d5625be0b7c72db793346f43fe3a7e7c1241f13
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-69648
Change-Id: I08bd892e2b6a733f3cda32091463745e8b8feed7
Reviewed-by: Simo Fält <simo.falt@qt.io>
By making the test independent of fixed top level widget sizes, it can
also be run on platforms, that do not support this feature.
Task-number: QTBUG-68297
Change-Id: I6945d259801360a9819b9b631d0a7497d3d27a9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
We had 30s and 60s only, which isn'tenough for the Qt CI.
Task-number: QTBUG-69741
Change-Id: I00e04a465fcf4fc1a462fffd154782999e84ef8b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The min/max section size was not checked when setting the default
section size. This was an oversight when the check for min/max section
size was added to resizeSection().
[ChangeLog][QtWidgets][QHeaderView] setDefaultSectionSize() now
checks if the given value is inside min/max section size
Task-number: QTBUG-69431
Change-Id: I1b5704282927ce5a8520f52174ebf91d9840bc8a
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
[ChangeLog][QtCore][QObject] Fixed a bug in setProperty() that caused a
property change not to take effect if the old value compared equal using
QVariant's equality operator, but the values were not strictly equal.
Task-number: QTBUG-69744
Change-Id: I00e04a465fcf4fc1a462fffd1547885861a07a64
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The majority of tests use QPluginLoader::setFileName implicitly, which
refuses to do any work in static builds. Therefore the majority of tests
are skipped. But in the future we'll get tests here that for example use
QPluginLoader::staticPlugins() and for that we want to include the
sub-directory in the build and test run.
Change-Id: Ib8ec274e22ac8050feaca8967eb8626b53876b92
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I'm intentionally not testing improperly-paired surrogates, since those
can't be encoded in CBOR.
Change-Id: I0d3cc366baaa49f3ad28fffd154240287ce34c22
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before libnss-mdns package is added to boot2qt dependency, the QEMU
devices should keep using the remote test server. There are two Linux
QEMU devices using 'linux-generic-g++' and 'linux-lmx7-g++' target
mkspec.
Relates to yocto/meta-boot2qt (Change-Id: I480f45)
Change-Id: I7870d3a184109e0abf712b4513148cf9a4520189
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
A typo meant the color-table was not fixed. For safety fallback colors
are also made opaque.
Change-Id: I3e609882177604910c4343c86f00221a89af9078
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Do not overwrite stdout/stderr by default, but only if requested.
This restores the behavior of QProcess::startDetached of Qt 5.9.
Task-number: QTBUG-67905
Change-Id: Idccf7b0da7bd80f88a0624286ddf2851bc974fb1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
with a case when we fail to ignore/pre-set one of possible
verification errors.
Change-Id: I23b06243b61acef1ef3576c51529f3ef6601ba7d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When the connection has been encrypted we will,
in QHttpNetworkConnectionChannel::_q_encrypted, emit 'reply->encrypted'
in which user slots can be called.
In the event that the user calls abort it will, however, not abort until
the next time it goes back to the event loop (which might not happen
until after the request has already been sent).
Task-number: QTBUG-65960
Change-Id: I96865f83c47f89deb9f644c86a71948dbb0ec0d0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That's actually how ignoreVerificationErrors (and QSslSocket::ignoreSslErrors)
are used to set the expected/known verification errors before handshake.
Auto-test updated too.
Change-Id: I9c700302d81ddb383a4a750fafd594373fb38ace
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A default-constructed QJsonObject has no data payload, it is only a pair of null
pointers. So, when it becomes necessary to 'materialize' such an object, a
special global emptyObject constant is used as the substitute payload. There is
a small problem with this global constant though, namely that it's is_object
flag is unset. In other words, the emptyObject is not an object, but an array.
Fix by setting the is_object flag on emptyObject.
The example code in the bug report
QJsonObject parent;
QJsonObject child;
parent["child"] = child; // 1
child = parent["child"].toObject(); // 2
child["test"] = "test"; // 3
runs into this problem on line 1. Inserting the default-constructed child means
inserting a copy of emptyObject. On line 2 a pointer to this copy of emptyObject
is retrieved and cast to an object. But it's not an object, it's an array, so
things go wrong hereafter.
Specifically, on line 3, two inserts are performed, one from operator[] and one
from operator=. Each insert increments a compaction counter. The second insert
triggers compaction (QJsonObject::insert calls Value::requiredStorage calls
Data::compact) and compaction branches based on the is_object flag. Replacing
line 3 with
child.insert("test", "test");
causes the example to appear to work since compaction is not triggered and the
JSON serializer does not look at the is_object flag. Still, any further insert()
calls would trigger compaction and memory corruption.
Task-number: QTBUG-69626
Change-Id: I8bd5174dce95998bac479c4b4ffea70bca1a4d04
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If we ever need to add QCborValue to the bootstrap library, it's
unlikely that we'll need this part. And by splitting it, I can make the
code handle more cases, that hadn't been properly handled before.
Change-Id: I2f630efbbce54f14bfa9fffd154160c0ad893695
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no such file, if one of the "directory" components of its
path is not, in fact, a directory. Added a test for non-existent file
(specified to give empty canonical file path) as well as a test for a
file in a sub-directory of a known file. The former incidentally
tests for QTBUG-29402, fixed long ago.
Change-Id: I60b80acc0f99f0a88cdb1c4d191af7384f3a31c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use one QStringLiteral instead of repeating a QLatin1String(), that
was passed to a function that has to convert it to unicode; do the
conversion at compile-time.
Reducing i % 256 is fatuous when i ranges from 1 to 100.
A QFile will close() itself on destruction, no need to do it explicitly.
Especially when *not* close()ing the *other* QFile that was left open.
Change-Id: Idb39312d9c9beaf082b7cead574bc6bb9bb3a775
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Unix, we wouldn't even *try* to truncate if the file was open for
appending. The combination may be an eccentric choice but - at least
when it's combined with reading - I can imagine use-cases for it; and
we should (at least try to) deliver what we're asked for, even if we
can't think why anyone would want it. So actually enable truncation
when asked to.
Amended some tests to check this works and corrected the QIODevice
documentation of mode flags (which misdescribed the special case that
implies Truncate). Removed special-case code, to apply truncate when
writing but not reading, since it's been made redundant by the
pre-processing of mode done in QFSFileEngine::processOpenModeFlags().
[ChangeLog][QtCore][QFile] When opening a file, if Truncate is asked
for, or implied by other flags, it shall be attempted, regardless of
what other options are selected. We previously did this on Windows;
now we do so also on Unix (even when appending).
Task-number: QTBUG-13470
Change-Id: I1e08d02cfbae102725fccbbc3aab5c7bf8830687
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For keys, QSettings escapes all characters outside of [-a-zA-Z0-9_.]
by using percent encoding, and changes '/' to '\'. That is,
settings.setValue("qt.*", true)
will be written to an .ini file as
qt.%2A=true
This means that QSettings can not be used to write general-purpose
qtlogging.ini files. Fix this by applying the reverse transformation
method from QSettings when reading in the .ini file.
[ChangeLog][Logging] Qt will now accept qtlogging.ini files
written by QSettings.
Task-number: QTBUG-69548
Change-Id: I55b7a8b433291268dc6855901f72b1c04f8ee6d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I'm not sure why QSFPM purposefully emits dataChanged for a source
dataChanged that triggers a layoutChanged (i.e. due to sorting, multiple
rows are moving around). (This predates the git import in Qt 4.5.)
Surely whoever is listening will not gain much from the "small" dataChanged
after the "big" layoutChanged... anyhow, this documents the current behavior,
at least.
It also proves that the bug I saw long ago (changing a filtered-out
value used to emit dataChanged(invalid, invalid), IIRC) is no longer present.
Change-Id: I8975c549db88226b2b3393de9f8dca4f4109df15
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This change frees the tests of their dependence on the Qt internal test
server (qt-test-server.qt-test-net). It makes the developers run the
tests out of Qt testing infrastructure.
If the user has installed Docker engine on their host, the test servers
will be built up inside separate Docker containers, and then, the test
case goes with the Docker-based test servers. Otherwise, the test case
will keep using the Qt internal test server.
Task-number: QTQAINFRA-1686
Change-Id: I518bc3675bfd658938509744b0e7e0610bc8bf66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
More Qt-style and more natural, also, shorter names.
Change-Id: I97bd68a8614126d518a3853027661435dc4e080d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
