This test failed a parallel stress test, but seemingly only because it
writes to its own build directory. This should not interfere with other
running autotests.
Change-Id: I80e548fdb0e915ebe86dcd2205537cb6fee09cff
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest appears to be parallel-safe. It fails our parallel stress
test, but only because it writes to its own build directory. This
should not interfere with other autotests.
Change-Id: Ie99dde24edc0fda0c8ec4352a6e44abb7cbc54f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest seems to be parallel-safe. It was not marked as such due
to an issue which rarely causes the test to hang on exit on Windows, but
that appears unrelated to whether or not the test is run in parallel.
Change-Id: I30bac75be3ddc14139594605481eb6af3f6795e7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
tst_qprocess::lockupsInStartDetached sometimes locks up on mac.
Mark this as a known issue.
Task-number: QTBUG-25895
Change-Id: I08b1bcf39f2bf373e74509a06415d9ba514b8993
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
MSVC2010 32-bit (with and without service pack 1) takes about 1 hour to
compile this file in some builds, since
1c7421ad14.
Avoid the relevant portion of the code just for these compilers.
Change-Id: Icbb4fa12a6d563a7cdc882c30cdb5705675bedb0
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
When given an invalid url, the output shouldn't be a valid url.
KDE's kurltest detected this regression compared to Qt4, where
all invalid urls were empty in toString() -- but we don't want that,
to give as much feedback as possible to the user.
Change-Id: Ie53e6e1c0a1d4bb9e12b820220dfb7e2f7753959
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: Ibbbe01f7d9550b953fc9fbd6ed52fc99fdb5f5d7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
QChar is actually a ushort and passing it via const-ref is suboptimal
Change-Id: Ib806b90397de6a816142ed130a22c0fe10a85d79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This allows the QUrl component getters to return fully decoded data,
like they did in Qt 4. This is necessary for some use-cases where the
component like the user name, password or path are used outside the
context of a URL. In those contexts, the percent-encoded data makes no
sense, and the loss of data of what could be represented in a URL is
acceptable.
Also take the opportunity to expand the documentation of those getter
methods, explaining what the options argument does.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: I89f743cde78c02f169c88314bff0768714341419
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows one to instruct QUrl to ignore the percent-encodings and
interpret the data exactly as provided. This is useful in certain
use-cases where the data comes from a non-URL context.
The strict-mode checking of the components is not implemented
yet. Currently, the behaviour is equal to that of TolerantMode.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-May/003811.html
Change-Id: Ia5abe045a8ce7f9b50cbce3b5a7e3735e068d03a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since we're about to introduce QUrl::FullyDecoded, this
QUrl::MostDecoded value would be confusing. Replace its uses with what
was intended at the point in question.
Change-Id: Iefd87bc33d37bace507c5cb0f206fa902e08e2df
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This was trying all the possibilities by brute force, but it turns out
that some combinations are not valid so they should not be
tested. What's more, it was using old values of the flags, so this was
actually testing nothing.
Change-Id: I6c2f5230d240fc23418df2d3a1ca905dbc47dd10
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
These tests have failed a parallel stress test and may contribute to
instability in test runs.
Change-Id: I2c4456ad7d3846c2262a0ba714ab8f0c9a05c597
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
A (probable) typo was causing the code dealing with anchors
to use uninitialized values. This used to work by chance, but was
indeed detected by Valgrind f.i. when running tst_qregexp --
the indexIn test on anc11 data reported:
==3015== Conditional jump or move depends on uninitialised value(s)
==3015== at 0x514B4EA: PeppeQt::QRegExpMatchState::testAnchor(int, int, int const*) (qregexp.cpp:1813)
[...]
==3015== Uninitialised value was created by a stack allocation
==3015== at 0x514B3EB: PeppeQt::QRegExpMatchState::testAnchor(int, int, int const*) (qregexp.cpp:1803)
Fixing the code also makes the aforementioned test to succeed.
Change-Id: If7b3e518c1bbfcf12573d2637c33ef2eca27c4d5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QIcon has been moved back from QWidget to QtGui, so the QIcon QVariant
and QMetaType handler can now be moved back to QtGui.
Also we can give back QIcon its old number, allowing to get rid of some
compatibility hack when unstreaming QVariant
Change-Id: I439d5c2987c06ecd619f394407850f678164afb8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The CI system is now using the parallel_test flag to run tests in
parallel. This test has become flaky, or at least more flaky than it
was previously. Mark it to no longer run in parallel.
Change-Id: I47bca3be620a8f648a0eb9c9b9f26d2d925efc01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The parser is recursive and too deeply nested json would
cause it to exhaust the available stack space leading to
crashes.
We now abort parsing with a DeepNesting parse error if the
document is too deeply nested. The current nesting limit
is set to 1024, which should be more then enough for any
real JSON data set.
Change-Id: I4adea3fd727149f7342536d73cf4530361a0a3a1
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
+ QChar::LastValidCodePoint enum value that supercede the UNICODE_LAST_CODEPOINT macro
replace uses of hardcoded values with the new API; remove leftovers
Change-Id: I1395c9840b85fcb6b08e241b131794a98773c952
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
inline all non-static members to a static ones (declared with QT_FASTCALL),
ushort converts automatically to uint and the conversion cost is minimal.
Task-Number: QTBUG-13052
Change-Id: I189a6f205736766adcd3de2d61cee71f30cc64f3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When qt_ntfs_permission_lookup is used, QFile::permissions failed
for files with long filenames.
Also created a test case for this API, which revealed another bug.
Task-number: QTBUG-25629
Change-Id: I73b7676a9d059c0e782b3f701b2e6bbc92f671ed
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
When a file is specified on a path that includes a drive letter
followed by a colon but no slash then it didn't always account
for the fact that this refers to the current path on that drive.
This fixes the problems in completeBaseName(), baseName() and
path(). Tests are also added for these three cases and some
others too.
Task-number: QTBUG-25353
Change-Id: I47a197c6af066f532442ad269be57597ec61303a
Reviewed-by: Irfan Omair <irfan.omair@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
On some systems prior to this change the code
would not build with the following error reported
by gcc:
error: integer constant is too large for 'long' type
Change-Id: I778bce9a72ccf3a41cdf17883d734082ed3fb4b3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Name is about mimetype names, while FileName is about, well, file names.
Task-number: QTBUG-25748
Change-Id: I34a9ac1a5fc06dc3e3855365e19c4dc7a1aa2671
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
This completes the transition from connectNotify(const char *) and
disconnectNotify(const char *) to the new QMetaMethod-based
functions.
Removed the old connectNotify autotests and renamed the
connectNotifyMethodXXX autotests to connectNotify, since there is
no longer any ambiguity about which overload is being tested.
Change-Id: Icf108a80177155f21bb73c165fb8ab5d4e997bc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
MinGW installations on case-sensitive filesystems expect
lowercase names of include-libraries and (usually) include
files.
When crosscompiling on Debian 6 (targeting MS Windows) linking
fails because mingw is looking for non-existent include-libraries.
Using lowercase names solves this.
Change-Id: Id3454f4ed8ba42b6ea93d65d9c0ce567db6712df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QUrl::fromLocalFile("/foo") doesn't set Host, but QUrl("file:///foo")
does (to remember that it saw a Host section, even if empty, which is
useful for urls like "remote://"). So ignore the Host flag in operator==.
Change-Id: I4322b4a75420c4e42766c0d65c1b121f28028a76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix operator== and operator< so that a URL with an empty fragment
or query, is not treated as equal to a URL without any fragment or query.
This restores the Qt4 behavior on this particular issue.
Change-Id: Ie989f37353fb13c791b1d558d638d2e8a5b5d1b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Null bytearray means no query, and QString::fromLatin1(QByteArray())
doesn't give a null string, but an empty string.
Same for setEncodedFragment(QByteArray()).
Change-Id: I992e9253e35941d66886456872ea06aa2ae92450
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A leading byte order mark is valid in utf-8 and we should
parse documents starting with those correctly.
Change-Id: Id85398ff6e05b93ceefbaf4a6de5571d5e61ca13
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
there are several reasons to do this:
* text breaking is not a shaper's job;
* since the text breaking rules are bound to a specific Unicode version,
updating Qt's internal unicode data would require updating the data in HB as well;
* makes porting to HurfBuzz-NG some easier
Change-Id: I0bbf8e8a343bc074696f4ddf2ae4e7fa32a61629
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This was crashing because the ':' was found past the end of the
username, causing the recoder to run from position 22 to 11, via the
long way around the memory.
Change-Id: Ic1ae596f34f7db857fb4210294974fb5a6adf691
Reviewed-by: Alexis Menard <alexis.menard@openbossa.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If the url we pass as parameter already have percentage encoded data,
we don't want to decode it and call fromPercentEncoding. The test
coverage is not complete for qdataurl.cpp file but it is better than
previously and it will also protect us from future regressions.
Change-Id: I79f709f44bed1b7f274a3de639c7e291fa91a193
Reviewed-by: Thiago Macieira
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
19d160b72b broke it temporarily, and this wasn't detected by
tst_headersclean, because it sets QT_NO_CAST_FROM_ASCII too,
which disabled the faulty code.
So this adds a new unittest for QT_NO_CAST_FROM_BYTEARRAY alone.
Change-Id: Iaf7a36a1378e77188bcc636e5dc9a1f9b84f70a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
C++ distinguish between "char", "signed char" and
"unsigned char", they are three independent types.
Fix QVariant behavior on ARM. On ARM "char" may mean
"unsigned char", but we depends on the sign during
a numerical conversions.
Change-Id: I610ce3fb88ed5964b67f3ae442d264fe16b2d261
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The implicit cast to QJsonValue was being ignored probably because the
compiler was generating a default QJsonValueRef assignment operator
Change-Id: I3a041595497308868dd7e4aab71027ce21bf8f0b
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This also tests by consequence that the behaviour of QByteArrays
containing NULs is consistent. Right now, that means the QByteArray
processing stops at the NUL, which is the same behaviour as if a
pointer to the byte array's data were used. (it's what happens if
there's no QByteArray overload and the const char* one is called)
Change-Id: If56a822f95866e8cb5b153d07b48198bb83fb386
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This commit completes the previous commit so that both QString and
QStringBuilder now operate on UTF-8 input.
A small fix was required in QStringBuilder: an if clause isn't enough
to separate the two append versions. Since there are no QString
functions that append to char*, if we're converting to a QByteArray,
we need to go through a QString first in a separate function.
Change-Id: Ic503340c5d0c32d420c90c91cc2e0fc1ae9230f3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
> http://www.unicode.org/versions/Unicode5.2.0/
D. Character Additions:
There are three new characters in the newly-encoded Kaithi script that will
require changes in implementations which make hard-coded assumptions about
composition during normalization. Most new characters added to the standard
with decompositions cannot be generated by the operations toNFC() or toNFKC),
but these three can. Implementers should check their code carefully
to ensure that it handles these three characters correctly.
U+1109A KAITHI LETTER DDDHA
U+1109C KAITHI LETTER RHA
U+110AB KAITHI LETTER VA
UCD 6.1 adds two more of them:
U+1112E CHAKMA VOWEL SIGN O
U+1112F CHAKMA VOWEL SIGN AU
Change-Id: I781a26848078d8b83a182b0fd4e681be2a6d9a27
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Show that nothing is changed either way, regardless of the encoding
flags used.
Change-Id: I31fba5f87eae777d4b708ab789b32169004bcbcc
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It should only strip one slash (as the name indicates), and not if the
path is just "/".
Change-Id: I133a81977241de77a49d1d1559143d30e0bd52f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I38f97ad379deafebef02c75d611343ca15640c8a
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This way, QWinEventNotifier will work on all Windows systems, not just
with the default event dispatcher. Other dispatchers (other than
QWin32EventDispatcher) are permitted, so the class should not abort just
because of that.
If a dispatcher really doesn't want to implement this, they need to
implement the virtuals to do nothing, possibly print a warning.
Change-Id: I2c132bcde95b9d5941c8906a0fcd2ad964087772
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
