that way we can theoretically support modules outside $QTDIR.
also, it's just cleaner.
Change-Id: I6139ebc7328b64ace8552b3e54f9a8c69248ceec
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't prepend the paths, as this will only mess up building of
subsequent modules (e.g., building qtdeclarative against an installed
qtbase would pick up the headers from the qtdeclarative previously
installed into the same directory as qtbase).
for frameworks this was a rather pointless exercise in the first place,
as their headers are properly isolated anyway.
however, make sure that we don't add system locations to the search
paths, as this is a) unnecessary and b) messes up subsequent libraries
in non-standard locations which want to shadow versions in standard
locations (pkg-config .pc files which add standard paths are considered
broken as well).
Change-Id: Ie1dc65d4767e98e1df6e49012505141935a6c704
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this fully replaces qtmodule-configtests.
it is way shorter and it actually integrates reasonably with qmake.
Change-Id: I819cc6807ad3661c419b54fa253894936dd88a64
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it is not really a Qt module, and pretending causes some messups.
Change-Id: Id0980f7c00d6d176dd4937f8b265b8b571aa1277
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
once we auto-generate the pris while building their respective modules,
the versions won't be available during bootstrap yet.
however, as these are core modules, their version is locked to the global
$$QT_VERSION anyway, so just use that.
Change-Id: I092f5e7d4dfe99c03e0df71f9409cac9be9f2297
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
it's module-specific.
on the way, fix it to actually support multiple files.
Change-Id: I796b0e98e38a54754022e0e2fa48cecb54d06ff4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this doesn't make too much sense as such, but the file will grow.
Change-Id: Iceaecdc24f83b3dafb40c8d2f1b6cddafa2d70a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake-generated version headers don't exist yet at the time syncqt runs,
so the forwarding headers would be deleted - just to be re-created a
moment later, thus changing the timestamp for no good reason.
Change-Id: I1b4c2f05f57c2315adf4b8dd726ea413ede1be5b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the location is determined by syncqt rather precisely. no need to
reverse-engineer config files.
$$HEADERS_PRI doesn't seem used anywhere, so don't set it as a side
effect.
Change-Id: I54a63356c350c0ddae4c880bf374fcd127282429
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the forwarding pri is loaded even if it was still created by syncqt, so a
top-level qmake -r will still catch it even in the future.
Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no point in adding Qt modules to SUBDIRS projects.
as QT contains core and gui by default, the operations are relatively
expensive, so skip them when they are unneeded.
Change-Id: Ibe6447ff452e403cb040fabe245d248edbda0eaa
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the check whether we are building a lib or an app (and thus have a target)
is done by quite some feature files (and generally wrongly, as they do not
account for the new aux target), so centralize it in default_post.prf.
Change-Id: I868edbc4185be8a6c23ecd4a2c126024d73cdeb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the declarative module is a fake, so there is no library to install.
Change-Id: I0dcd39f3304e38adce9ea34e2268905525abd3d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qt version is always set.
otoh, we need to allow the module to override the own version.
Change-Id: Ic3eb7dae59a5fb011cede09151553b652a0a1d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.
Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qrc_ files are generally not meant to be included, so there is not much
point in doing this.
qprintsupport was a notable exception - which broke on mac and thus
needed a hack. just remove the qrc_ inclusion.
Change-Id: If5115665f331a280869e800673bf7b81d3ab559a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is needed by webkit's creative directory layout.
Change-Id: I2317162c11696d2820423d63563b10d3024a6cb6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.
Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
a variable name should not reflect the tool which uses it, but its
purpose - especially, as the scope will be extended soon.
this variable is used by webkit, which has a somewhat creative directory
layout.
Change-Id: Id3d3fad6ed9395cb967aeabc79e47a0ba17f5423
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
absorb module.prf into qt_installs.prf, as that's where it belongs.
add qt_install_module option and automatically set it in
qt_module_config. make qt_installs use that option.
Change-Id: I860616f3a29a456f7b88ddaffa09375400c8911e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's used by people (in particular, qt creator), so it would be not nice
to just delete it entirely.
Change-Id: I6bd849d00ebfe3b9b126e01a6d1c6e7c6584d8ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qtbase install dir being a build dir is a necessary and sufficient
condition for detecting a developer build.
Change-Id: I3d98c789ac6fbe570980459edabb9a941bf1e5d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead, always pass -qtdir (which, btw, is a slight misnomer - it
should be -qtdatadir) with the correct path. this centralizes the
relevant logic in default_pre.prf.
Change-Id: Icc788d3f3e5f7b68b444e63e181efdea3b4ef160
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this cleans up a lot of hacks supporting the build of qt, including the
last bits of $QTDIR.
Change-Id: Id119886ed8097967dad6cf86ebd4e71d90c42841
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.
as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.
Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
returns the list with the order of the elements reversed.
one can easily implement this with existing functions, but this is way
faster and more readable.
Change-Id: I12d306eb9fe58fc332622274ea6b658192529491
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
to be used in system() calls and when assembling EXTRA_COMPILER and
INSTALLS .commands by hand.
Change-Id: Id706cd56aa267a9fb4b14e3416692b4716fafa5b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
just exposes QDir::fooFilePath() wrapped into QDir::cleanPath()
Change-Id: I7a7644084825fd8092a9910ac20f695c4d9351f6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
more or less QDir::toNativeSeparators(QDir::cleanPath())
Change-Id: I52deee1e8086559eda5833b387a0cf64d21cbcd9
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
return the build directory corresponding to a given source directory.
this is the identity function if not shadow-building. if input lies
outside the source directory, return empty value.
Change-Id: I2d2a6b1112bd19989fe29cfe19a12d39a0d208c1
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this quotes the elements of a variable in a way suitable for re-parsing
as qmake code.
Change-Id: I0e6ea2478c43b5aeff45f485a48ac8c86705dd4a
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this simply returns the keys of all variables in the context.
Change-Id: I0092f827744fcd257dfb9e7ca664c87c6f1cc763
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
