Implicit conversion from QByteArray to const char* works for most gtk
functions. But gtk_file_chooser_dialog_new() uses varargs and passing
the non-POD QByteArray through varargs does not work (it's UB).
Task-number: QTBUG-59763
Change-Id: I85f9323d99342896e6921cdeb85f5a1af7377b4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The SHA3 family is a modified version of Keccak. We were
incorrectly calculating Keccak (and even *testing* Keccak!),
but claiming it was SHA3.
To actually calculate SHA3, we need invoke Keccak on the original
message followed by the two bits sequence 0b01, cf. §6.1 [1].
[1] http://dx.doi.org/10.6028/NIST.FIPS.202
[ChangeLog][QtCore][QCryptographicHash] QCryptographicHash now
properly calculates SHA3 message digests. Before, when asked
to calculate a SHA3 digest, it calculated a Keccak digest instead.
Task-number: QTBUG-59770
Change-Id: Iae694d1a1668aa676922e3e00a292cddc30d3e0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unix mmap(2) system calls do allow for mapping beyond the end of the
file, though what happens after you try to dereference the pointers it
gives is unspecified. POSIX[1] says that implementations shouldn't allow
it:
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified portions
of the last page of an object which are beyond its end. References
within the address range starting at pa and continuing for len bytes to
whole pages following the end of an object shall result in delivery of
a SIGBUS signal.
However, Linux allows this in read-write mode and extends the file
(depending on the filesystem).
Windows MapViewOfFile never allows mapping beyond the end.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/mmap.html
Change-Id: Ie67d35dff21147e99ad9fffd14acc8d9a1a0c38d
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apply white text only for macOS style.
Amends 2c0033983b
Task-number: QTBUG-59784
Change-Id: I9e66e929699efd715ed4565394f1aba763aeb32a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
GCC bug 68949 causes tst_QGraphicsGridLayout and tst_QGraphicsLinearLayout
to fail on 5.2.x/5.3.x: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68949.
This change adds aggregate initialization to QSizeF arrays to work around
the bug. The bug was discovered when compiling and running tests on ARM
with GCC 5.3.0.
Change-Id: I9ecf7b032b6ca1477c29dca3bd7d0ec8d69a0454
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the missing endobj tag for the shader function object.
Change-Id: Ieb3cfa5a5d0e27d04164a80b028d41371507fb94
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Ensures that numbers representable as 64-bit integer
are not printed using exponent notation.
Some JSON implementations such as the one of the Go
standard library expect this in the default
conversion to int.
Change-Id: Ic3ac718b7fd36462b4fcabbfb100a528a87798c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes a warning-turned-Werror in qdistancefield.cpp:
In member function ‘void QVarLengthArray<T, Prealloc>::realloc(int, int) [with T = bool; int Prealloc = 256]’,
inlined from ‘void makeDistanceField(QDistanceFieldData*, const QPainterPath&, int, int)’ at ../../include/QtCore/../../../../qt5/qtbase/src/corelib/tools/qvarlengtharray.h:275:10:
../../include/QtCore/../../../../qt5/qtbase/src/corelib/tools/qvarlengtharray.h:390:19: error: ‘void* memcpy(void*, const void*, size_t)’: specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Werror=stringop-overflow=]
memcpy(ptr, oldPtr, copySize * sizeof(T));
~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Apparently GCC cannot rule out that copySize may be negative in the
call to memcpy. Put GCC on the right track by adding a Q_ASSUME.
Change-Id: I63e3801e52ebe2a7f77e3a97ef03ec3869319c8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
-Werror is now disabled for that compiler, but it doesn't hurt to fix.
io/qstandardpaths_unix.cpp:149:32: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
qtestcase.cpp:2330:31: error: narrowing conversion of '(ms / 1000)' from 'int' to '_Timet {aka unsigned int}' inside { } [-Werror=narrowing]
Change-Id: Id92f4a61915b49ddaee6fffd14aea2c1e686e8f2
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
The compiler is mostly GCC in disguise, but the libraries are not. Since
the toolchain is not open, it's difficult to fix issues in it.
Task-number: QTBUG-59671
Task-number: QTBUG-59672
Change-Id: Id92f4a61915b49ddaee6fffd14aea2639153f073
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Fix the condition in QWidgetPrivate::resolveLocale() to decide whether
to propagate locale: make it match setLocale_helper()'s condition when
deciding whether to propagate to descendants. This lead to a
QDateTimeEdit's calendar popup not getting told what locale to use
correctly, unless we setLocale() on it overtly, which then blocked
propagation of locale changes to it unless QDateTimeEdit manually
propagated the changes.
Fix the documentation of WA_WindowPropagation to mention locale as
also being propagated (which it was in several places, only neglecting
this one in resolveLocale).
[ChangeLog][QWidget][Qt::WA_WindowPropagation] Propagate locale
consistently, along with font and palette, within the widget
hierarchy. Previously, locale was propagated on ancestral
setLocale(), but not on creation of the descendant.
Task-number: QTBUG-59106
Change-Id: I92270f7789c8eda66a458274a658c84c7b0df754
Reviewed-by: David Faure <david.faure@kdab.com>
RFC6125 section 6.4.2 specify we need to convert the IDN to ascii
before comparison. Note that we don't need to toLower anymore
because toAce takes care of it.
Section 7.2 recommands that we dod not attempt to check for wildcard
character embedded within the A-labels or U-labels of an
internationalized domain name. So we reject names that contiains a
'*' but starts with 'xn--'.
Change-Id: Ib0830520a1f82bbf9fd11818718277a479527ee3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We need to add gradle wrapper to Qt because it was removed from latest Android SDK.
Adding it to Qt, will give us more control and will save us from pain in the future.
Task-number: QTBUG-59237
Change-Id: I6419876f8be11c0feeac448b228a46f811065264
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This patch fixes the followings:
- call "it.value()" only on valid iterators
- destroySurface() doesn't remove the surfaceId from m_surfaces
- the surfaceId is removed from m_surfaces when the QtSurface is really
destroyed
Task-number: QTBUG-59185
Change-Id: Iee37dde16fee16f19906812c55c1f0b0279b033c
Reviewed-by: Mathias Hasselmann <mathias.hasselmann@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
CustomTextWidgetIface marked its text() method as an override;
DropOnOddRows marked its canDropMimeData() as an override; each
neglected some other methods that are overrides. Convert
Q_DECL_OVERRIDE to the keyword in affected classes, to match.
Change-Id: I78b38e20a81e3e6aab282a1cb3d70cdf8a5f4135
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
When dragging out a tabbed group which contains placeholder
for floating QDockWidget, the floating QDockWidget would not
be reparented to the new QDockWidgetGroupWindow. That's because
QDockAreaLayoutInfo::reparentWidgets does not reparent floating
widget (because of the item.skip test)
However, we need to be careful when reparenting to pass the
flags so it does not get docked.
Also do not reparent QDockWidgetGroupWindow which may end up
temporarily in the layout during animation when dragging a
QDockWidgetGroupWindow onto another.
Step to reproduce a crash that if fixed by this patch (with
the mainwindow example):
1. Enable QMainWindow::GroupedDragging from the "Main window" menu
2. Add a new dock widget, "Foo", from the "Dock Widgets"
3. Tab "Foo" together with the black dock widget
4. Drag "Foo" out. (Now, Foo is still a child of the QMainWindow,
and is still in the layout as tabbed, but is skipped)
5. Drag the black dockwidget out. (This, in fact, crates a
QDockWidgetGroupWindow which contains the black dockwidget and the
floating "Foo", but since "Foo" is floating, it is not reparented)
6. Destroy "Foo" using the "Dock Widgets" menu. (Since Foo's parent
is the QMainWindow, it is not removed from the QDockWidgetGroupWindow's
layout, which will cause crash on the next relayout)"
This commits amends commits d57bb19902
and 0feeb6f6d2
Change-Id: I600a56cdd889435b83d2b740598a24d81059bf44
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
the borrowing of headers always happens from "proper" modules which are
actually built as frameworks if so requested. that means that even
though the borrowing module itself never is a framework, it needs a
framework path and include paths that point into frameworks.
amends 20c7ab44.
Change-Id: Ic582060dd179cc592e9be7792ff02cebdfabd772
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... as that would error out unhelpfully.
but hypothetically, there could be dynamic builds of system libpng and
sqlite3 against a static zlib, so allow it. however, it's a tad
unlikely, so default to -qt-libpng when using -qt-zlib (and -qt-sqlite3
is the default anyway).
amends dab013804.
Change-Id: I74c41e8d8a7ee1ba5add395842383d176e23f142
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
mkdir(data2) depended on mkdir(data1) being run before, or it would
fail. In addition, the rmdir() test required the equivalent mkdir() test
being run before. So drop these annoying dependencies and make the tests
cleaner by having clear separation of the test data and merging the two
tests into one
The entryList() test still depends on the testdir being clean: it will
fail if mkdirRmdir() previously failed.
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e35972d2a3d8
Reviewed-by: David Faure <david.faure@kdab.com>
QString::toUtf8() returns QByteArray, which got implicitly converted to
C strings and promptly deleted. Instead, return the QByteArray to the
caller.
Found by ASAN:
==13935==ERROR: AddressSanitizer: heap-use-after-free on address 0x6060000dffb8 at pc 0x7f764f27320b bp 0x7ffd49b11bb0 sp 0x7ffd49b11358
READ of size 7 at 0x6060000dffb8 thread T0
#1 0x7f7649d174e2 in g_strdup (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x684e2)
#2 0x7f763f7abe5b (/usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0+0x39e5b)
#3 0x7f763f78915a in g_object_new_valist (/usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0+0x1715a)
#4 0x7f763f789520 in g_object_new (/usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0+0x17520)
#5 0x7f7640f6bcb0 in gtk_dialog_add_button (/usr/lib/x86_64-linux-gnu/libgtk-3.so.0+0x186cb0)
#6 0x7f7640f8d2c9 in gtk_file_chooser_dialog_new (/usr/lib/x86_64-linux-gnu/libgtk-3.so.0+0x1a82c9)
#7 0x7f7641727281 (/opt/Qt5.8.0/5.8/gcc_64/plugins/platformthemes/libqgtk3.so+0x13281)
Task-number: QTBUG-59611
Change-Id: I37cc967e689f4523b504fffd14adbf944b53b754
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Don't cast an expiring QObject down to QWidget. Cast the QWidgets stored
internally up to QObject to perform the comparison. The result is the
same, but no invalid casts are possible anymore.
Found by independent review.
Change-Id: Iffa8a66cf5cab0270961befe982637ac8e4f0f7b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We don't load and save pointers usually because the pointer value cannot
be guaranteed to remain across program invocations. However, nullptr is
an exception: a null pointer is always a null pointer.
We don't actually have to read or write anything: there's only one value
possible for a std::nullptr_t and it is nullptr.
[ChangeLog][Important Behavior Changes] A QVariant containing a
std::nullptr_t is now streamable to/from QDataStream.
Task-number: QTBUG-59391
Change-Id: Iae839f6a131a4f0784bffffd14aa374f6475d283
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The warning comes from the MS headers, not from the compiler.
Task-number: QTBUG-59576
Change-Id: Ie67d35dff21147e99ad9fffd14acd7fb628fa1d4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Task-number: QTBUG-59218
Change-Id: Ic839a36af1ecab39da0c3394c34181b6717e24e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QUrl::isRelative(str) would be false for such files, so first check for
file existence before doing any URL parsing.
Change-Id: I51b6229251ad94877ac408b2f8018456d3e10a36
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a text block is empty, and we are adding preedit text to it,
we need to merge the format of the preedit text with the current
format of the cursor, otherwise we will use a default format and
then suddenly switch to the proper one when the text is committed.
The reason this becomes a bit complex is that there are no rules
preventing someone from using several ime attributes to specify
formats for isolated parts of the text, and no rules defining the
order of such attributes. So even if the common case is one
text format attribute for the entire string, we need to make sure
we also handle the other cases gracefully, e.g. when we are setting
different formats for different substrings and then providing these
out of order. To make sure we have these corner cases covered, we
also add a set of autotests.
[ChangeLog][Qt Widgets][TextEdit] Fixed initial char format of
input method text as it is in pre-edit mode.
Task-number: QTBUG-59196
Change-Id: I1e37928e3bd1395fec1b5591908d4c69b84eb618
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
psql driver was previously using QDateTime::toString() function which is locale-depndent.
Task-number: QTBUG-59524
Change-Id: I7f50f95b5c82e66476abfee24ad28b78b3257041
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit e0ea0f6178 optimized QChar <->
QString(Ref) comparisons by adding more overloads to avoid creating
QStrings from QChars just to compare them.
But these new overloads made existing comparisons to QChar ambiguous.
This was known at the time for QChar/int comparisons.
It has since turned out that also comparing to '\0' is ambiguous,
ie. not comparing to int or char per se is ambiguous, but comparing to
nullptr constants is, because QString(const char*) is just as good a
candidate as QChar(char)/QChar(int).
Since we allow QString/QChar comparisons, it seems logical to solve
the problem by adding QChar<->nullptr overloads.
[ChangeLog][QtCore][QChar] Disambiguated comparisons with nullptr
constants such as '\0', which 5.8.0 broke. As a consequence,
QChar<->int comparisons are no longer deprecated, as this was a failed
attempt at fixing the ambiguity.
Change-Id: I680dd509c2286e96894e13078899dbe3b2dd83bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The mmap64 functions in all Linux libc fail to properly check that the
value fits in the system call parameter. I guess the developers just
said "16 PB are enough for everyone"...
Change-Id: Ic39b2c4fd9c84522a8fafffd14ac91567ce09c09
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Timer IDs have been reused since Qt 4.5 or thereabouts, so just checking
if the timer ID is in the timer dictionary is an incorrect check: our
timer may have been deleted and replaced by another with the same ID.
Instead of deleting the WinTimerInfo object, let's just mark it as
unregistered by setting timerId to -1 and cooperate in deleting at the
appropriate places. Since unregisterTimer skips deleting if inTimerEvent
is true, the appropriate places are everywhere that set inTimerEvent to
true.
Change-Id: I057e93314e41372ae7a5ff93c467767c8a6d92ea
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in the vain hope to get the CI unstuck again.
Change-Id: I1b01bb1d59a8850f68d1d80838f5606f4159bcbd
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Much simpler, no memory allocation, no locking.
Change-Id: Iae839f6a131a4f0784bffffd14a9e70c7b62d9a7
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
the View's position and metrics are in pixels, not points
Change-Id: I285d5378db98187f54019bff9b8a1cde05dc3b35
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
QWindow::setVisible calls QWindowPrivate::applyCursor without checking
if screen() returns null. This patch adds a check in QWindowPrivate::applyCursor
that the screen is not null. Now that it is tested there, no need to test
it from the other caller (setCursor)
This patch should not change behavior of setCursor at all, it should only
fix the crash when coming from setVisible
Task-number: QTBUG-59528
Change-Id: I06bbdb4e04c02ac840ba637242d1f2cfde5bdd62
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The constructor is not only disabled under QT_NO_CAST_FROM_ASCII,
but also under QT_RESTRICTED_CAST_FROM_ASCII.
Change-Id: I7bbaf2891913d5256dff7f80c49075ea3326155a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- recursion is not needed for walking up the parent chain;
- use camel-case, modal_window -> modalWindow;
Change-Id: I4b7697f2388fd16f11be67ba475bd63ad249d89e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Made change to clear the hover index when the mouse leaves the widget.
This will ensure the component does not think the item still has the
mouse over it.
Task-number: QTBUG-46785
Change-Id: I34b7f0e171e9cf07ca23150af1b0e6e59a10a58a
Reviewed-by: David Faure <david.faure@kdab.com>
Cross-compilation on linux with mingw-w64 failed, since it provides
all libraries in lowercase name.
Change-Id: I8e82a4504d4ec9d3047af6b1d6a11945754f182d
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This corrects an issue where the file system paths returned for some
QStandardPaths values on Apple Platforms would be URL encoded, for
example having %20 instead of an actual space character.
Task-number: QTBUG-59389
Change-Id: I771a44eb20b756842c324ac6fc9bdc475ce84826
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
