Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
There was a small amount of time between the last readDatagram() call
and disabling a read notifier in case the socket had a pending
datagram. If a new datagram arrived in this period, this qualified as
absence of a datagram reader. Do not change the read notifier state
because it is disabled on canReadNotification() entry and always enabled
by the datagram reader.
Thanks to Peter Seiderer, who investigated the same: "Querying
hasPendingDatagrams() for enabling/disabling setReadNotificationEnabled()
is racy (a new datagram could arrive after readDatagam() is called and
before hasPendingDatagrams() is checked). But for unbuffered sockets the
ReadNotification is already disabled before the readReady signal is
emitted and should be re-enabled when calling read() or readDatagram()
from the user."
However, this patch does not completely solve the problem under Windows,
as the socket notifier may emit spurious notifications.
Task-number: QTBUG-46552
Change-Id: If7295d53ae2c788c39e86303502f38135c4d6180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A buffered TCP socket might be open only for writing purpose. As a
possible use case of the API, this patch avoids accumulation of
unwanted data in the internal read buffer.
Change-Id: I2759c1e04968d24e2ae71f3eca05e7e560cd8a41
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit changes the readDatagram() and writeDatagram() virtual
functions to take a QIpPacketHeader as meta data, instead of a
QHostAddress/quint16 pair. As previously, the header is an "out"
parameter for readDatagram() and an "in" parameter for writeDatagram().
The header pointer in readDatagram() is allowed to be null if the
PacketHeaderOptions indicates WantNone. Otherwise, it must not be null.
The extra options parameter is introduced because we may not always want
all the metadata upon reception. For sending, we know what to include or
not based on what's set in the incoming header parameter.
QIpPacketHeader splits sender and destination because we'll be able to
return both on datagram reception.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca4213255008c7
Reviewed-by: Richard J. Moore <rich@kde.org>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Properly QSKIP tests that use disabled QProcess and symlink
features instead of excluding them silently by #ifdef.
Other reason is that moc doesn't respect QT_NO_* defines
in class definition which causes build issues on some
platforms.
Change-Id: I041020f7452f7d36c7ec8a5866a4ba5eb23d1f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Other parts of tst_qudpsocket.cpp already did this check.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca545a03c9596a
Reviewed-by: Richard J. Moore <rich@kde.org>
This has been known to be broken for a while. Now it works: you can bind
and you'll retain the port (and the file descriptor) for the connect
call. Incidentally, in fixing the binding for more than one IP for the
hostname (with event loop), this commit fixes the setSocketDescriptor
XFAIL.
[ChangeLog][QtNetwork] Fixed a bug that caused both QTcpSocket and
QUdpSocket to close the socket and lose any bound ports before
connecting. Now bind()/setSocketDescriptor() followed by connect() will
retain the original file descriptor.
Task-number: QTBUG-26538
Change-Id: I691caed7e8fd16a9cf687b5995afbf3006bf453a
Reviewed-by: Richard J. Moore <rich@kde.org>
Actually, it tests the buffered QTcpSocket. Place it in
tst_qtcpsocket.cpp instead of tst_qabstractsocket.cpp.
Change-Id: I3055c4773d0de74c238be4f11b2d1c07ddad4485
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractSocket::close() always calls QIODevice::close(), which resets
QIODevice's internal read buffer. So it makes no sense to make same calls
from disconnectFromHost(). This made the closeCalled private member
superfluous.
Change-Id: I4ec64e9711490e44e737763e4ed7fb41bffe2556
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The documentation says that QUdpSocket emits readyRead() only for one
datagram and that if you don't read it, the class will not emit again.
That should be implemented by disabling of the socket notifier once we
have the datagram already read, but was broken.
In turn, that breakage caused a live-lock of the event loop: since we
didn't disable the notifier nor read the pending datagram, the event
loop would fire every time for the same datagram.
The re-enabling of the notifier was already working.
Task-number: QTBUG-43857
Change-Id: Ic5d393bfd36e48a193fcffff13bb32ad390b5fe8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Linux gracefully allows us to do that and treat the v6 socket as if it
were v4. Other OS (notably OS X) aren't so forgiving.
Change-Id: I13dd3274be2a4b13e8b1eef93cbc2dd17b648f96
Reviewed-by: Richard J. Moore <rich@kde.org>
We want to use "localhost" if the server's address is "any", as some OS
can't send datagrams to "any" (e.g., OS X and FreeBSD).
Change-Id: I1004bc2282e7f930cdb7ed394aa9f4b5a1cfcf82
Reviewed-by: Richard J. Moore <rich@kde.org>
On my Mac Mini, port 5000 is in use, which means the broadcasting test
fails.
Change-Id: Ifb0883263e277f388342430349ea7315d42f324a
Reviewed-by: Richard J. Moore <rich@kde.org>
It was unconditional. Someone forgot to check for IPv6 support before
skipping IPv6 tests.
Change-Id: I7b11528ad02560f0db9defde3c64f76f48a6c1f8
Reviewed-by: Richard J. Moore <rich@kde.org>
QUdpSocket doesn't support binding to QHostAddress::Any and then joining
an IPv4 multicat group since QHostAddress::Any is really an IPv6 socket
with v6only = false. The test did check this case, but failed to ignore
the warning.
Change-Id: I62d782408319a6e566e0ff1a6081b706ac1f669c
Reviewed-by: Richard J. Moore <rich@kde.org>
With IPv6, you cannot bind to a multicast address. You need to bind to a
local address only. The previous tests either checked this or didn't
check the result of bind().
Change-Id: Ief70887d8988fc1bc4394cf6ff34b5d560e5748e
Reviewed-by: Richard J. Moore <rich@kde.org>
Sending 100*8 packets of each type of message is WAY overkill. That's a
stress test without limiting. My Linux system starts reporting EAGAIN on
the socket, so reduce the amount of data sent.
Change-Id: I153f44cf3b91d37526dac580b400114cc80b1769
Reviewed-by: Richard J. Moore <rich@kde.org>
IPv6 has no such thing, so don't try to bind to an IPv6 address to send
broadcasts (even though that works) and it's a poor idea to bind to IPv6
to receive broadcasts. Moreover, skip any IPv6 network addresses
(broadcast() is invalid).
Change-Id: I2829b042c000158565adfd92db682f37d67dacae
Reviewed-by: Richard J. Moore <rich@kde.org>
If you don't have /etc/lsb-release, you'd get
sh: line 0: [: =: unary operator expected
Change-Id: Idb5c79f799879e4d32cd640ef74fb388227f831e
Reviewed-by: Richard J. Moore <rich@kde.org>
It doesn't make sense because there is no command to ask the proxy
server to join a multicast group. At best, we could write a datagram via
proxy without joining, but we definitely can't receive.
Change-Id: Icc6b54572a053fb7821dfca1f4111f2046ff8686
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove an useless check which spontaneously allow direct reads from the
socket engine.
Change-Id: Ia3d2a572d6f1563d613fe2f00d0d6849df259827
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
... because it fails on the new network test server. The Socks5 tests
in QUdpSocket have already been disabled by commit
aa3eaf9d2e .
Task-number: QTBUG-35490
Change-Id: Ib062adb422ff6e5538f14d15a266d79c3bb53956
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
... because they are too unstable. We can check whether they are more
stable once the new network tests server is in place.
Task-number: QTBUG-38385
Change-Id: I5ced7cc1f89290812aa88f174a41965fd2ef7252
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Replacing old troll.no domain with qt-project.org domain. Using troll.no
doesn't work anymore.
Change-Id: Ic6fa71b044d1adbdc66c875b47bfdc256a2afc8e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise you get:
undefined reference to `vtable for QAbstractSocketEngine'
when -developer-build is not used.
Change-Id: I444140736a6bf736894dc12a20f6a4d48af2678e
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In a slot connected to readyRead, if the app detects that the
buffer size is too small and increases it, it expects that
readyRead() will be emitted again.
setReadBufferSize() doesn't re-enable the socket notifier when
calling from within readyRead, and readyRead itself was missing
the code to do it.
Change-Id: Ia00a3066ad3ba09d5cfae0716adc5691ae96c3fa
Done-with: Thiago
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... because they fail on the new test server. This commit can be
reverted once the Socks5 socket engine is fixed.
Task-number: QTBUG-35490
Change-Id: I85635d4b44d26168d40a56b7a121693297564f0f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
It's unexpected that all messages generated by the stream version
of qDebug and friends have a trailing space. It also makes switching
to categorized logging (which only supports the stream version) difficult,
since all autotests checking for debug output would have to be adapted.
Task-number: QTBUG-15256
Change-Id: I8d627a8379dc273d9689f5611184f03607b73823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The new test server image will not have a SMTP service installed, and
the network self test does not check for that either.
Change-Id: I1063777832148e184de4ddf21d9154364f644e1e
Reviewed-by: Richard J. Moore <rich@kde.org>
Functions normally found from <sys/socket.h> are available on VxWorks
from <sockLib.h> header.
Change-Id: I2263ec40ba9f37bc95755b633fb43d66ceb2777c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The one in tst_QLocalSocket::writeToClientAndDisconnect just needed
proper ordering: that's what waitForDisconnect is for. At the same time,
we need to make sure we get the same message from all three
implementations of QLocalSocket::waitForDisconnect (and without the
useless space at the end).
Change-Id: I21364263cf908df022df814a6a39fcb5783e84e6
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The rule for a new override is that it must still work if the old
implementation is called. The catch is that any class that derives from
QProcess and isn't recompiled will still have QIODevice::open in its
virtual table. That is equivalent to overriding open() and calling
QIODevice::open() (like the tests).
In Qt 5.0, QProcess::start() called QIODevice::open directly, not the
virtual open(), so there's no expectation that a user-overridden open()
be called. With that in mind, simply fix QProcess::start to not call the
virtual open at all.
Similarly with QLocalSocket, the calls to open were always non-virtual.
Task-number: QTBUG-32284
Change-Id: I88925f0ba08bc23c849658b54582744997e69a4c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This should have been done in the commit that introduced open
(953255abab), but was missing.
Change-Id: I1c2de4ad5fa42aa5b90646e7d4d7d1b1570a0f87
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
... because SkipSingle was removed in Qt5, and a QSKIP would result in
the SSL tests not being executed.
This can be reverted once QTBUG-29972 is fixed.
Change-Id: I3663ee52f00c3f4391ce78cf63bd444656d79cb3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
One of the IPv6 autotests was always disabled instead of being disabled
only when the system has no IPv6 support.
Change-Id: I34dffbeae6ba85a706bfeb0cc4750a4514b73a65
Reviewed-by: Peter Hartmann <phartmann@rim.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifdce72af844901665c4ebab11507216ba5f00fc1
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Ifdef out waitForBytesWritten on Windows.
See comment in source.
Change-Id: I7a2268d2634c2524cd8291c72dd9708e430e314e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Not having access to a network test server is not a failure per se
but rather an enviromental condition not met at run-time.
Change-Id: Ie7d10ca5fbf2df45fb1fd1ac19718c9fae855c03
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
QSystemSemaphore is persistent after a crash and we'd have to toggle the
Open/Create flag. Waiting for the server being available by trying to
connect is much more reliable.
Change-Id: I510814cef189b43658911f8ade3cf831ae6c7e58
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Removing the lackey executable that needs QtScript to be built.
This was a qscript bastard that was able to run a client and a server
script. It's replaced by a C++ version with the same functionality.
Nice side effect: the two second wait per test row could be removed.
The client executable is now waiting for the server to be created.
Task-number: QTBUG-24142
Change-Id: I135b75abf6620d3b0af50dc226ea8c81c2bf4149
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The programs in the example isn't used in the test.
Examples should be in the right directory and be of a certain
quality.
Change-Id: Id77bd1295efb3387fa54c379eb9c882cdc5b88bd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Commit 5230d62fe added a #define NOMINMAX, which conflicts with a
NOMINMAX definition in the MinGW headers. Just use the same definition
as in MinGW to fix the gcc warning.
Change-Id: Ib21dd323ebbdca5d143e394c7631303e0c72541a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Replaced with qt-project.org test domain.
The connectToMultiIP auto test is still disabled due to lack of test infrastructure.
Task-number: QTBUG-23294
Change-Id: Icf01aabb0ae503291abdda4e8f773f8e0a08931a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Do not compare a QString to QString(). Instead use the .isEmpty() method.
Change-Id: I8bb5e64563bf173abe7288bb9e35375bee1fe445
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC 4.8 warns:
main.cpp:165:60: warning: ‘type’ may be used uninitialized in this function [-Wmaybe-uninitialized]
app.arguments().at(3).toInt());
^
Change-Id: Ib0f6847031437b588e14c6708fdddea5fd474b58
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
We need to handle FD_CLOSE separately on Windows as this will be sent
only once. When we get FD_CLOSE we need to check if there is more data
available for reading. It there is this might indicate that there is
another FD_READ that we need to handle after the FD_CLOSE. So in this
case we will manually create another close event.
Task-number: QTBUG-19409
Task-number: QTBUG-25386
Change-Id: Ie19906bc3f64fb6a85a508a5ab12caac5d70ccdb
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Using the nullary version has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything. So I've added the macro where it
was missing, or moved it to a central place when it existed
hidden.
In tst_qnetworkreply, this became a bit tricky, because a private
header is conditionally included, so moved the Q_DECLARE_METATYPE()
into a conditional section, too.
Change-Id: I71484523e4277f4697b7d4b2ddc3505375162727
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
removed printsupport tests for wince as there
is no print support on wince and removed the special
handling for wince from 4.8 on some tests as the dependent
modules are not part of qt base anymore
Change-Id: I4ffb22da11f98beee1013f775cb5ce4b936d3211
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
On Windows Xp we can not connect to the pseudo interfaces used for
Teredo, so do not add these to the tests.
Change-Id: I4e20c880fa2d18f266ffcef2f640d8b2e6d0cd21
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Do not try to connect to the Terdo Tunneling Pseudo-Interface as
this will fail for Windows Xp.
Change-Id: I6dcd8369ba1e8642224cd4ac53f4032ed46d050d
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
When we do not have dual stack the listen on QHostAddress::Any will
result in a serverAddress that is AnyIPv4.
Change-Id: I3c2c21c9412cd46a57e3ed7ce1c1bd2ef42d4bd9
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Server responses may arrive in more than one packet, though this
is rare due to nagle algorithm.
Also fixed IPv6 addresses being discarded from server responses,
which was caught by the new autotest.
Task-number: QTBUG-18564
Change-Id: I32d9e2978037fb3e1fff27b7e618b5da6d222f28
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
qdatetime.h uses std::min/max and on Windows windows.h (or some subsequent
header file) may under certain circumstances define min/max as macros.
The easiest way to prevent the windows header files from doing that is to
define NOMINMAX in the place right before windows.h is included. The other
way is to define min and max to min/max themselves to prevent windows.h
from doing its evil thing.
If a user of Qt (WebKit in this case) chooses the approach of defining
min/max to themselves and then includes qdatetime.h, then a subsequent
inclusion of windows.h doesn't work because qdatetime.h undefines min/max.
We should not enforce the type of workaround needed, therefore this patch
removes the workaround from qdatetime.h and requires user code that
happens to include windows header files before qdatetime.h (seldom case)
to choose either workaround.
Change-Id: I7347eec7369491a065e894cff557004e069453d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We'd like to decrease the default timeout for tests in the Qt Project CI
so that we waste less time waiting for hanging tests.
Tests which genuinely take a long time to run, such as these, should
have their timeout explicitly set in their .pro file.
Change-Id: I4fe6249e9efa764b230251d73a1115c24411e168
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
In tests when IPv6 is not present QSKIP IPv6 tests.
Task-number: QTBUG-23660
Change-Id: I02abc7322d765a93cbf661e53c76257f03dca73e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The socket engines already implemented this, but it is a good idea
to test it explicitly.
Task-number: QTBUG-25634
Change-Id: Ife3fe09b0119ed435e4055523c553847739a09fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the scope ID is not set, Mac and Windows will not transmit
packets to link local addresses. This patch implements setting
the scope in the native socket engines and adds a test case.
(it was partially implemented already, though UDP specific code
paths were missed in the unix engine)
Task-number: QTBUG-25634
Change-Id: I23300bdc9856e38458078e913daaa59cd05a74b5
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I94cc301ea75cc689bcb6e2d417120cf14e36808d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has been passing consistently since starting to run in CI.
Task-number: QTBUG-25445
Change-Id: Id024921b18ea4ef94ad2f47d9db2ccda3212eaaa
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QLatin1Literal is just a typedef of QLatin1String.
Change-Id: If20ca225e57a7fb45a7775f0fc81aedb6da88c96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Switch on most of the tests (all but the bearer tests), marking the two
known failures as insignificant tests.
Change-Id: I17f228a938de1a23eddf897f494bfa4e54338dae
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test has one stable failure on CI, but that failure is not observed
by all Ubuntu 11.10 users. Mark that failure with QEXPECT_FAIL when it
is going to fail and re-enable the test, following the pattern
established for the qtcpsocket test on this platform.
Task-number: QTBUG-23380
Change-Id: Ic7546595f314c55ebd36957ada92978141a1c509
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reference tasks with detailed analysis of failures rather than generic
task for blacklisted tests.
Change-Id: Ibd0ed836ffb84fe9aa14488d43085316e666de21
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This makes it easier to find insignificant tests that have no associated
bug report.
Change-Id: Ia71d59da062818d3860b0365d063e044705267fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Way back in the mists of time, someone added SO_REUSEPORT to socket binding,
which was great, because otherwise it meant that multiple UDP sockets couldn't
share the same port on OS X (as platforms with SO_REUSEPORT apparently don't
support rebinding with SO_REUSEADDR).
However: SO_REUSEPORT also means that *any* bind on a port will succeed, which
is most definitely not wanted in the case of TCP sockets, so check the socket
type before performing the actual bind.
Also test that multiple listens don't take effect.
Change-Id: I2f8d450bcfb8a7f3abd8918a4e789a850281dd13
Done-with: Thiago Macieira
Done-with: Shane Kearns
Task-number: QTBUG-6305
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
On OS X and Windows, this was not working, because the socket was being bound
in v6 mode (due to ::Any being for dual mode), but the address passed was a v4
address, meaning it took the wrong codepath. Linux, strangely, apparently works
anyway.
This is fixable in OS X (by using the v6 join path when bound in v6/dual mode),
but the same fix doesn't work on Windows, failing with WSAEADDRNOTAVAIL.
Don't allow this behaviour, and provide a sane error message telling the user
what to do instead.
Done-with: Shane Kearns
Task-number: QTBUG-25047
Change-Id: Iaf5bbee82e13ac92e11b60c558f5af9ce26f474b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
When writeDatagram is called without first binding the UDP socket,
then bind it as QHostAddress::Any.
This allows the same socket to be used to sent to both IPv4 and
IPv6 destination addresses.
Allowing the OS to autobind the socket inside sendTo() may
result in a single protocol socket.
Task-number: QTBUG-5275
Change-Id: I2b76507e8a8a38369c6eafb61ce4191d1d6cc930
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This is unfortunately still "most of them", because of QTBUG-24451
however some of the unit tests are still possible to test stably.
Also skipped test cases which would hang forever due to QTBUG-24451.
Bearer tests are not run, because they pass when test machine has no
wireless LAN, but fail or hang if it does (QTBUG-24503)
Change-Id: Icf99d45707102d2ef9219ed0b5ad521605716219
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Windows unhelpfully writes to only one byte of the output buffer
when getsockopt is called for a boolean option. Therefore we have
to zero initialise the int rather than initialising to -1 as was
done before.
This in general only works for little endian architecture, because
the word would look like 0x01000000 on big endian. So I have added
some compile time asserts in the assumption that windows is always
little endian. This is ok for comparisons with 0/false, but not
comparisons with true or nonzero values.
In the case of IPV6_V6ONLY, it is documented as DWORD (unsigned int)
but on some windows versions it is returned as a boolean triggering
the warning. I removed the warning, as the conversion to int works on
both LE and BE since it is only compared with zero.
Task-number: QTBUG-23488
Change-Id: I3c586d1ada76465fc045a82661f289920c657a4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is broken in a couple of ways. A few one line fixes
combined into a single patch.
1. Linux is the only OS that does
abstract unix domain sockets by prepending a null as the first
character. Don't test this on non-Linux platforms and expect
it to pass.
2. Change QVERIFY2 to QCOMPARE so we can see why this
fails in CI but no on the local system. Use QCOMPARE
where possible.
Change-Id: Ic3d2cf9696730dc4d6589539fdfe8a48ccf28de5
Reviewed-by: Alex <alex.blasche@nokia.com>
Due to recent changes in the test it should now compile
and run properly. This re-enables the test.
Change-Id: I6c647d99fa1f1b1c53e006fef2865d6be08ec16c
Reviewed-by: Alex <alex.blasche@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
QLocalServer could only listen to sockets it created.
Thi is not always possible as sockets may be passed
by socketpair() or have to be created locally by
other means. This adds a similar feature to QLocalSocket
where a native descriptor maybe used.
Change-Id: I43b0af179b3b868dd164d4e1fd312ff4546cf9ff
Reviewed-by: Michalina Ziemba <michalina.ziemba@nokia.com>
Reviewed-by: Tapani Mikola <tapani.mikola@nokia.com>
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Helper processes were not found properly on all network tests
when the test was run with "nmake check":
- tst_qtcpsocket
- tst_qtcpserver
- tst_qnetworksession
- tst_qnetworkreply
Task-number: QTBUG-24199
Task-number: QTBUG-24203
Task-number: QTBUG-24226
Task-number: QTBUG-24231
Task-number: QTBUG-24232
Change-Id: Ia4451b5a5e3fe9f81aba3837baf8292411f995d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
QLocalServer had no way to set socket options
that more complicated servers require. The
first set of options allow setting of access
control on the sockets.
Change-Id: If4268c66462fc2e6cf1e70b1d5f56c76d2c69228
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Lackey is currently not built due to a qscript dependency. Mark the
test as an expected failure, so we can resume testing QLocalSocket
again. See QTBUG-24142
Change-Id: I2642ed30cf7a2068f30f63801c632fea7dae7691
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
This autotest assumed that various network operations could always be
completed within 5 seconds. Notably, it assumed that an attempt to
resolve a nonexistent hostname would always result in an error within
5 seconds. In my testing, it usually takes 4-6 seconds to complete,
but occasionally takes as much as 13 seconds.
(cherry picked from qt4 commit c85faef67b6a7e8fcedb4ce800282d41f5b79ec1)
Change-Id: I982ecf6ebc1bb8ee2184cf5592cb2684474c870b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QAuthenticator used it for the convinience of QHttpSocketEngine only.
QHttpSocketEngine has now been ported to use QHttpNetworkReply to parse
HTTP responses.
Change-Id: Idf6e70aa76613aad6e3d789d81ca1b4fd73575c2
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This is a fix for problems introduced by bf7f170.
Change-Id: If5dd8e031ef2efea578b3efb188c2e950e1ba41a
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Windows x64 uses 64 bits integer for sockets, to ensure compatibility we
should use ptr sized integers for our socket descriptors.
Task-number: QTBUG-19004
Change-Id: I4b56023874a4f1bad107c66c054fecfedde33d88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: If36b1b8f69c3509128786fec67899ae18ffaa2bc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This testcase fails on the Ubuntu 11.10 x64 platform, add flag to .pro
file so test is ignored on this platform.
Task-number: QTBUG-23380
Change-Id: I51831df8c8e9bfcf63d3689e37552ca1a62691cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMessageBox was being used to test nested event loops. This has been
changed to use QEventLoop directly.
Also, there was an unnecessary use of QPushButton to trigger a test
case, which has been removed.
As a result, 3 test cases can be run on VXWORKS, and one more test case
on Windows that were previously skipped.
Change-Id: Ic65ed441cd37d242f89df3ef3b8638a1458d9cf3
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
tst_QTcpSocket::disconnectWhileLookingUp required the host lookup +
connect + disconnect procedure to complete in <50ms, which is not always
true.
When disconnecting (rather than aborting with close()), wait for the
disconnection to complete with a timeout of 5 seconds.
Task-number: QTBUG-21043
Change-Id: I3b59abf9a8eb2c6d99416e1a8ec6b528885b656e
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
setSocketDescriptor fails because socket is in the wrong state.
This is timing dependent, if qt-test-server is still in the DNS cache
then the test failed.
- clear the DNS cache to avoid the host lookup state being skipped.
Change-Id: If159d514b1aa9b62a4834f6352d5e7b0a00a5724
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
bind() test failed if there is an autoconfigured IPv4 address.
e.g. bluetooth adaptor that is not attached to a network.
Or WLAN adaptor in peer-peer mode.
- solved by skipping the autoconfigured IPv4 addresses in the same way
as IPv6 addresses are already skipped
bind() test fails for proxy
- skipped, QTBUG-22964 created
Change-Id: I9a799ae8db421783f474e97cf876d6e265516397
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When listening on QHostAddress::Any, serverAddress() should return
QHostAddress::Any too, assuming that setting the socket options
was successful.
Task-number: QTBUG-22899
Change-Id: I50a9ff1b4ad0c1c1905e2952c595d7068df2627d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This should be API-compatible with Qt 4, but is not ABI-compatible, due to
removing the enum from QUdpSocket.
Task-number: QTBUG-121
Change-Id: I967968c6cb6f96d3ab1d6300eadd5bde6154b300
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.
Change-Id: Ie44b6ea8dd496857ea264f730148d3dc4f5c8324
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This commit re-enables tests that are assumed to be ok by now, since they:
- Have been passing in CI for a long time recently (more precisely, not failed once in pulse run range 730-829).
- Did not have any known issues associated with them.
Note that not all of these tests were disabled as a result of QTBUG-21402.
Task-number: QTBUG-21402
Change-Id: I80bbf8b351bd9165aa968e98f4dc17e8be6bc7c3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have lived in tests/shared/util.h for a long time, but
they really belong in qtestlib.
Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The platformsocketengine autotest uses the native socket engine directly
rather than through QAbstractSocket. The bind tests were failing because
the autotest was creating a socket with IPv4 (AF_INET) and then binding
with QHostAddress::Any (AF_INET6).
A linux kernel update caused this to start failing on the test machines.
Change-Id: Iea62f3d56dbfb35fcb952dcf00313578eb2bd764
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I21664d8d92b27c26c64789fc08d0ec7b8988456a
Reviewed-on: http://codereview.qt-project.org/5941
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This change disables failing tests to increase the
likelihood that 'make check' terminates with a zero
exit status. This is done to prevent the CI system
from blocking further commits once qtbase#refactor
is merged into qtbase#master.
Failing tests are marked as insignificant (by putting
'CONFIG += insignificant_test' in the .pro file).
Note: This is a temporary measure that needs to be cleaned up
once the refactor->master integration is complete.
Ideally all disabled tests need to be enabled and passing.
All changes will be marked by the string QTBUG-21402 in a comment
for easy location.
Task-number: QTBUG-21402
Change-Id: Ic4400671671f6d9b75b106a6aa4755b20e74378d
Reviewed-on: http://codereview.qt-project.org/4678
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
