The platform has been removed in Qt 5.7.
Change-Id: Ie768b5ffbe60270c27b4a670dcf580ea361cb361
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There is no need to check the 'enabled' states before calling
set{Read|Write}NotificationEnabled() functions, because the socket
event notifiers are fully optimized for this case.
Change-Id: I0cd4fbc2298c9b9523420a60a46a65e0b305fa12
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
QtNetwork: WARNING: qtbase/src/network/access/qnetworkfile_p.h does not have the "We mean it." warning
Task-number: QTBUG-45925
Change-Id: I9cd9237450101c4c862746e774fa37d69083c213
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
access\qnetworkfile.cpp: In member function 'void QNetworkFile::open()':
access\qnetworkfile.cpp:69:93: error: invalid use of incomplete type 'class QDateTime'
headerRead(QNetworkRequest::LastModifiedHeader, QVariant::fromValue(fi.lastModified()));
Task-number: QTBUG-45925
Change-Id: I61ff67f9691fe7b6966353e29eeb03d37590d78d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This change adds support for BackgroundRequestAttribute to local file request. It is useful
when opening files located in network drives where the file open operation could take several
seconds to complete. When this attribute is activated the QNetworkAccessManager::get call
returns the reply immediately and the user has to wait until QNetworkReply::finished signal
is emitted or QNetworkReply::isFinished function returns true.
Task-number: QTBUG-45925
Change-Id: Ie2019dd94fe04253d1ef6874811d7e749a5aad93
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QTcpServer::addPendingConnection() is protected, so it is possible to
add pending connections from a class derived from QTcpServer. This
derived class can get a QTcpSocket from somewhere else, in which case
d->socketEngine will not be set (or used). Given that it is possible to
add pending connections in this scenario, it would make sense to be able
to retrieve them as well.
[ChangeLog][QtNetwork][QTcpServer] Permit using a QTcpServer with
externally created QTcpSocket.
Task-number: QTBUG-51288
Change-Id: I830c10f1a881e2bca4e4ad716d8be865e1c27a9f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This is required for a follow-up commit which adds support for reporting
multiple results in a single benchmark interation.
Change-Id: I8dd7f37ce046cc0f9556be5d0df76f84b82ec1a7
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The code is restructured to only loop over the non-empty connection
lists. This can be checked early while the mutex is locked already,
thus removing mutex lock/unlock calls that were done previously just
to realize the allsignals list is empty and can be skipped.
Additionally, at the very end of the loop over the last signal
connection list, the mutex was acquired even though it doesn't need
to be as we will quit the loop anyways.
This patch leverages these facts to remove the mutex locks which alone
has a considerable impact on the corresponding signal/slot benchmark.
The instruction count goes down by ca. 13%, while cycle count and
runtime drop by about 29%.
Before:
********* Start testing of QObjectBenchmark *********
Config: Using QtTest library 5.7.0, Qt 5.7.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 5.3.0)
PASS : QObjectBenchmark::initTestCase()
PASS : QObjectBenchmark::signal_slot_benchmark(simple function)
RESULT : QObjectBenchmark::signal_slot_benchmark():"simple function":
0.00000362 msecs per iteration (total: 362, iterations: 100000000)
14.05652884 CPU cycles per iteration (total: 1,405,652,884, iterations: 100000000)
21.00585673 instructions per iteration (total: 2,100,585,673, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(single signal/slot)
RESULT : QObjectBenchmark::signal_slot_benchmark():"single signal/slot":
0.00004709 msecs per iteration (total: 4,709, iterations: 100000000)
183.75943370 CPU cycles per iteration (total: 18,375,943,371, iterations: 100000000)
362.08604759 instructions per iteration (total: 36,208,604,760, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(multi signal/slot)
RESULT : QObjectBenchmark::signal_slot_benchmark():"multi signal/slot":
0.00004965 msecs per iteration (total: 4,965, iterations: 100000000)
183.54556242 CPU cycles per iteration (total: 18,354,556,243, iterations: 100000000)
362.07734835 instructions per iteration (total: 36,207,734,835, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(unconnected signal)
RESULT : QObjectBenchmark::signal_slot_benchmark():"unconnected signal":
0.00000752 msecs per iteration (total: 752, iterations: 100000000)
30.08781366 CPU cycles per iteration (total: 3,008,781,367, iterations: 100000000)
92.01520465 instructions per iteration (total: 9,201,520,466, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(single signal/ptr)
RESULT : QObjectBenchmark::signal_slot_benchmark():"single signal/ptr":
0.00005620 msecs per iteration (total: 5,620, iterations: 100000000)
219.24739264 CPU cycles per iteration (total: 21,924,739,265, iterations: 100000000)
327.08675555 instructions per iteration (total: 32,708,675,556, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(functor)
RESULT : QObjectBenchmark::signal_slot_benchmark():"functor":
0.00005852 msecs per iteration (total: 5,852, iterations: 100000000)
218.45401359 CPU cycles per iteration (total: 21,845,401,360, iterations: 100000000)
328.08472410 instructions per iteration (total: 32,808,472,410, iterations: 100000000)
PASS : QObjectBenchmark::cleanupTestCase()
Totals: 8 passed, 0 failed, 0 skipped, 0 blacklisted, 44469ms
********* Finished testing of QObjectBenchmark *********
After:
********* Start testing of QObjectBenchmark *********
Config: Using QtTest library 5.7.0, Qt 5.7.0 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 5.3.0)
PASS : QObjectBenchmark::initTestCase()
PASS : QObjectBenchmark::signal_slot_benchmark(simple function)
RESULT : QObjectBenchmark::signal_slot_benchmark():"simple function":
0.00000361 msecs per iteration (total: 361, iterations: 100000000)
14.01854817 CPU cycles per iteration (total: 1,401,854,818, iterations: 100000000)
21.00532932 instructions per iteration (total: 2,100,532,933, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(single signal/slot)
RESULT : QObjectBenchmark::signal_slot_benchmark():"single signal/slot":
0.00003398 msecs per iteration (total: 3,398, iterations: 100000000)
132.52735104 CPU cycles per iteration (total: 13,252,735,104, iterations: 100000000)
314.04965106 instructions per iteration (total: 31,404,965,107, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(multi signal/slot)
RESULT : QObjectBenchmark::signal_slot_benchmark():"multi signal/slot":
0.00003448 msecs per iteration (total: 3,448, iterations: 100000000)
133.63623046 CPU cycles per iteration (total: 13,363,623,046, iterations: 100000000)
314.04952237 instructions per iteration (total: 31,404,952,238, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(unconnected signal)
RESULT : QObjectBenchmark::signal_slot_benchmark():"unconnected signal":
0.00000747 msecs per iteration (total: 747, iterations: 100000000)
29.02349389 CPU cycles per iteration (total: 2,902,349,390, iterations: 100000000)
92.01088221 instructions per iteration (total: 9,201,088,222, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(single signal/ptr)
RESULT : QObjectBenchmark::signal_slot_benchmark():"single signal/ptr":
0.00004350 msecs per iteration (total: 4,350, iterations: 100000000)
167.83581885 CPU cycles per iteration (total: 16,783,581,885, iterations: 100000000)
279.06426656 instructions per iteration (total: 27,906,426,657, iterations: 100000000)
PASS : QObjectBenchmark::signal_slot_benchmark(functor)
RESULT : QObjectBenchmark::signal_slot_benchmark():"functor":
0.00004337 msecs per iteration (total: 4,337, iterations: 100000000)
170.45074743 CPU cycles per iteration (total: 17,045,074,743, iterations: 100000000)
280.06267229 instructions per iteration (total: 28,006,267,229, iterations: 100000000)
PASS : QObjectBenchmark::cleanupTestCase()
Totals: 8 passed, 0 failed, 0 skipped, 0 blacklisted, 33228ms
********* Finished testing of QObjectBenchmark *********
Change-Id: I6f79fd68ae7a07d9b439ca047bf1f53c83751d45
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The ref-cycles counter corresponds to the monotonic timestamp counter
that can be read using the RDTSC assembler instruction. Using it
instead of the default cycles counter is useful as it removes the
effect of dynamic frequency scaling on the measurement.
[ChangeLog][QtTest] The ref-cycles perf counter can now be used.
Change-Id: Id7d56576db362706c20f9a399e5acea35ee799f2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Saves e.g. ~900b and ~2900b in text size in QtOpenGL and
XcbQpa libs, resp., on optimized GCC 5.3 Linux AMD64 builds.
Change-Id: Id904689164ca32df41118a23747c70048d8e6604
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Saves ~600b in text size on optimized GCC 5.3 Linux AMD64 builds.
Change-Id: Ib542a128982fc53638780945014d903f2cbee9c3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
If a user selected the text "foo" and typed "bar", upon pressing undo,
the text would change to "b". This is incorrect and does not match the
functionality of QLineEdit or the default behaviours of Windows/OSX/Ubuntu.
This was fixed by a change made to always merge two sequential inserts
if they are not part of the same block. Previously the selection delete
and the "b" were part of one edit block and "ar" was part of another.
With this change, the selection delete and "bar" are part of the same
edit block.
Unit test changes are part of a separate review (Part #1) since they
required changes in qtdeclarative.
[ChangeLog][QtGui][Important Behavior Changes] Fixed QTextEdit to match
undo functionality of QLineEdit to group two sequential inserts into one
undo action.
Task-number: QTBUG-38825
Change-Id: I76bf30e331e3526277c3e0ade58cf95b611fc117
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
... by making a function in the private class virtual.
Change-Id: I45c25c6c59511a8e8821ca96b0cf28cbf1b2f267
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Text was sometimes drawn without a proper gap between the baseline
and underline.
[ChangeLog][Text][OS X] Fixed underline position.
Change-Id: I9b28d1ac39e18e8d98de92b354a1d635100853a9
Task-number: QTBUG-33708
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
While the calculated underline thickness would be approximately
correct for many fonts and sizes, it was sometimes incorrect,
e.g. for 18 pt Helvetica. Found while investigating QTBUG-33708.
Change-Id: Ic1d8f2d809c02235d8f15f0414536e04c2a7b844
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The font engine itself specifies the line thickness, underline position
etc. so we need to pass in the correct one, not the multi engine
(which will just return whatever engine #0 prefers.)
Change-Id: I2b2b92e7881df8a8310aedbc6efa304c3210c095
Task-number: QTBUG-33708
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
These classes are only held in QSharedPointer, so optimize for that:
1. Disable default ctor, copy ctor and assignment operator,
destructor and swap for public users.
2. Add create() to return an instance in a shared pointer.
3. Allocate public and private classes in one memory block,
use QSharedPointer::create() to also add the QSharedPointer
control block to the same memory allocation.
As a consequence, this reduces the creation of a Q*DialogOptions
into a shared pointer by two memory allocations.
Add a macro to enable atomic updates to QtQuick and other users
outside QtBase.
[ChangeLog][QtGui]
[QFileDialogOptions/QFontDialogOptions/QMessageDialogOptions/QColorDialogOptions]
This class no longer has value semantics, but needs to be held
in QSharedPointer (as it always was). To copy an instance, use
the clone() method.
Change-Id: I4c81220e0a8286a310df1c224a30eca34824c4e6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Using shuffle and align storing our quint24 format can be done much
faster. This in particular improves conversions to RGB888.
Change-Id: I179748706a33a43fd6f60f5c40287317418c8867
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The fonts directory is removed in 5.7. Avoid creating a broken
symlink.
Change-Id: I95d1970737f54810006c084436411fc95743f72d
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
While re-parenting a widget on a mouse down, it's possible that NSWindow
lives longer than QCocoaWindow (because self.grabbingMouse == YES),
on mouse release event self.platformWindow is not nil yet, but is not a valid
pointer already. Bail out early before touching it.
Change-Id: Iea1025a82386d4b9dc21b3cbd3a5b248b2dd3620
Task-number: QTBUG-42059
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
This issue is reproducible on OS X when using a Magic Mouse
or a combination of Magic Trackpad and regular mouse. In these
cases it's possible to start a scrolling gesture on one widget
and move the mouse cursor over another widget.
Although we send the wheel event phase information, we never
made any use of it. This means that a widget would start
scrolling even though it never received a ScrollBegin event.
In this patch, we make sure the scrolling cycle is respected
and that once a widget starts scrolling, it'll be recieving
all the wheel events until a ScrollEnd event reaches the
application.
For those input devices not supporting a proper phase cycle,
we introduce a new (undocumented) phase value, NoScrollPhase.
If the wheel event phase is NoScrollPhase, then we ignore
the current scroll widget and proceed as usual. This value
is the default for wheel events. It's up to the platform
plugin to set the proper phase value according to the data
received from the OS.
Finally, we fix a few of QWheelEvent constructors to properly
initialize the phase and source properties.
Task-number: QTBUG-50199
Change-Id: I3773729a9c757e2d2fcc5100dcd79f0ed26cb808
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
... by replacing them with C++11 ramge-for loops.
In one case, I took the liberty to remove a useless
if(isEmpty()) check around a for loop. Now that we
don't use Q_FOREACH anymore, we don't incur the copy
for empty containers anymore. Left the indention of
the loop level to avoid code churn.
Saves 1.8KiB in text size on optimized GCC 5.3 Linux
AMD64 builds.
Change-Id: I1b1fb34847f6a631f0d580fd5261c7f5fed8475c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is what std::vector implementations usually do,
because it minimizes memory fragmentation and useless
allocations since no user will call clear() unless
she intends to append new data afterwards.
Fix calls to resize(0) that show how existing code
tried to work around the issue.
Adjust test. Port from QVERIFY(==) to QCOMPARE as a
drive-by.
[ChangeLog][QtCore][QVector] clear() now preserves
capacity. To shed capacity, call squeeze() or swap
with a default-constructed QVector object, see the
documentation for an example.
Change-Id: I9cebe611a97e027a89e821e64408a4741b31f1f6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Saves ~100b in text size on optimized GCC 5.3 Linux AMD64 builds.
Change-Id: If2bbd2baac6f4ab66ad436028a8013ce0fa97a33
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Saves ~1100b in text size on optimized GCC 5.3 Linux AMD64 builds.
Change-Id: I928be44314dde06d5fdd2486a3417870bda64af4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Saves 132b in text size on optimized GCC 5.3 Linux AMD64 builds.
Change-Id: I435395c60802f446302ca6b2529d87c4cacb6304
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Virtually all code in Qt that inspects a QRegion does
so by calling rects(), which returns a QVector<QRect>.
But rects() has a problem: A QRegion that contains just
one rectangle internally is not represented by a QVector,
and the mere act of calling rects() makes QRegion create
one.
So, expose the fact that QRegion is a container of QRects
to users by providing iterators and begin()/end(), which
can be nothrow, since for the one-rectangle case, instead
of vectorize()ing the region, we just return pointers to
(and one past) the 'extent' rectangle.
As a consequence, the iterator type is just const QRect*,
but I think that whatever containers QRegion may use under
the hood in the future, it will be certainly one that is
layout-compatible with a C array.
No mutable iterators are provided, since QRegion maintains
a running bounding-rect, so a mutable iterator would have
to call into QRegion for every change, which doesn't make
sense.
[ChangeLog][QtGui][QRegion] Is now iterable as a container
of QRects: added {c,}{r,}{begin,end}().
Change-Id: I2fa565fac0c1d26e2c0937604b23763cd4e23604
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... by replacing them with C++11 range-for loops.
This is the simplest of the patch series: Q_FOREACH took a
copy, so we do, too. Except we don't, since we're just
catching the return value that comes out of the function
(RVO). We can't feed the rvalues into range-for, because
they are non-const and would thus detach.
Saves 2.2KiB in test size on optimized GCC 5.3 Linux AMD64
builds.
Change-Id: I914aa20fe65577b2e32ea7ea89d51a8d003a57ba
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Q_FOREACH over a QVarLengthArray or std containers
is a particularly bad idea (because of the deep
copy that Q_FOREACH then performs).
Use C++11 range-for (without qAsConst(), because
neither QVLA nor std containers are CoW).
Saves 5.7KiB in text size on optimized GCC 5.3
Linux AMD64 builds.
Change-Id: I4c1fb0b488bb08726912528b559840a45c1397df
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
`ar' tool from latest binutils shows warning:
ar error: `u' modifier ignored since `D' is the default (see `U')
Warning message includes word "error" so QtCreator processes it as
error in UI.
`ar' command-line option `u' might be dropped safely because it is
unnecessary. Option `c' is added to suppress extra `ar' warnings.
Other build systems are also affected. For example, automake:
https://bugzilla.redhat.com/1155273
Change-Id: Ia378b720503d93b0c0c12ae7a5f38f4d7c32eee5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Given the flakyness of cursor positioning, loosen the check to only verify
that the cursor is outside the window. The hint is only active on Windows
depending on a system setting.
Task-number: QTBUG-51516
Change-Id: I474d251cc41e68f182baf8dba84eaf38d914d7ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The algorithm used was:
- If possible, just declare the container const
- Otherwise, for first()/last(), use constFirst()/constLast()
and for front()/back(), to not destroy the use of the STL
API subset, use qAsConst()
Did some caching of function returns here and there, and
converted one 0 to nullptr as a drive-by.
Also saves almost 4KiB in text size on optimized GCC 4.9
Linux AMD64 builds.
Change-Id: I04b7bfd68dc85c22de247cb65a310e1cbbca1e8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The user-defined copy assignment, copy constructor
and dtor inhibit the move special member functions.
Implement them manually.
Change-Id: I0d38d7cf6c9611e13b5b081d734d01d6fe4d5276
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This test has failed already in openSUSE 13.1 where
it has been marked as insignificant. Incorrect font
size is returned from a font dialog in tst_qfontdialog.
Task-number: QTBUG-46056
Change-Id: I7b5841e90d4cbe9d9573b46ec7dec64432160473
Reviewed-by: Akseli Salovaara <akseli.salovaara@theqtcompany.com>
Use mapToGlobal() only for foreign windows passing relative coordinates.
Amend change 9915630d08.
Task-number: QTBUG-50206
Task-number: QTBUG-51320
Change-Id: Idee60cc8ea8004c0355ce78a00f807798836b49c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
... wherever it allocates memory.
Since the string literal is used in more than one function, to
avoid duplication of .rodata, wrap the QStringLiteral in an
inline function.
Change-Id: If4fca7443b3150b1c8360c850da32f5c567c1065
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It made us skip the rest of the test, not just the small set of
sub-tests that were conditioned by the if () in whose else it sat.
Change-Id: I5e914e0aeb9d5ba44b21966d071aaccbc590365d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
QTypeInfoQuery was introduced for 5.6 to decouple isStatic
and isRelocatable so old code continues to work. But since
this test still uses !isStatic to mean trivially-relocatable,
it will fail as soon as one of the checked types is marked as
Q_RELOCATABLE_TYPE instead of Q_MOVABLE_TYPE.
Incidentally, such a change is in the pipeline for Qt 5.7/5.8,
so fix the test by porting to QTypeInfoQuery. Do this in 5.6,
because that's when QTypeInfoQuery was introduced.
Change-Id: I06f815f26ca9b430e124c4a2f8de2a729999762b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The source argument can be nullptr, e.g. if debug information
has been stripped out.
Task-number: QTBUG-51195
Change-Id: Ie229c82278c420200cad33c19e8c3f52ab7f12c3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Introduce C++ casts and add some conversions. Where possible, increase
const-correctness. Remove trivial conversion function
BSTRToQString().
Task-number: QTBUG-50804
Change-Id: I1820d4693db8bc0dfa6c4a5fecd768cf64a4405c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a convenience function for allocating arrays and use
algorithms.
Task-number: QTBUG-50804
Change-Id: Iead75f8297923fd13efcfc7987f76262777d074b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QWindowsIA2Accessible does not implement IAccessibleRelation (found
when replacing the C-style casts by static_cast<>). Remove the
corresponding branch.
Task-number: QTBUG-50804
Change-Id: I80901634044f85e413666f34b91be2e6ad70da91
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
