IBM's POWER and the PowerPC architecture have been merged into a single
ISA, the Power ISA (see http://www.power.org). Use this unified name in
Qt.
Change-Id: Ia41492b0031d890843e43c5f7ecd1e60c65bb75b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This flag was used by QWS to set or not set the composition mode
when filling the background. E.g. this was used by 'transparent'
windows to set the alpha bits. QPA didn't have this enabled in 4.8,
the code paths are gone in Qt5 and it is the responsibility of the
QPlatformBackingStore to initialize the alpha bits properly.
Change-Id: I4011d842b718d6a40b19922b5f75c597e63079c8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This is motivated by visiting a customer that re-implemented the
::winId method and returned WId(0) that resulted in a crash. Currently
there is only a comment inside the implementation of the ::winId
default implementation. Add a note to the API documentation, add
a Q_ASSERT to check if our assumption holds true.
Change-Id: I8607a4efc4f561f7849c976cd2454f6fbcb20eaa
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The helper functions contained QSKIP macros which do not also skip their
parent function. These QSKIP function were removed and replaced with a
return success value.
Change-Id: I533f57842fc95beaeb1fcde5235678e9807db056
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest seems to be caught in an event loop preventing further
correct signalling. Mark test function skipped with QSKIP.
Task-number: QTBUG-24374
Change-Id: Ic943a33b71fa87d0873278cb7b7b134c22602be3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For shadow builds where "make install" had not been run, the
tst_QLocale::emptyCtor test function would fail to find its helper
application because QFINDTESTDATA was not searching for it in the build
directory due to the test not instantiating QCoreApplication.
This commit fixes the test by instantiating a QCoreApplication using the
QTEST_MAIN macro, which also allows some special case code for Windows
CE to be removed.
Change-Id: Ic81d4699da2538c24b36b3d6bd52c4a02ad417f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Prior to this commit, a benchmark test could report 0..n passes and 0..m
fails or skips, where n is the number of accumulation iterations used to
collect benchmark data and m is the number of times the test function
was invoked. Depending on the type of benchmark measurer being used,
this could result in a very large volume of test output and inconsistent
pass, fail and skip counts between test runs.
This commit changes the behaviour so that each benchmark test reports
one pass, fail or skip, regardless of the number of iterations used to
collect benchmark data.
This commit also prevents benchmark data being reported in the test
output if the benchmark test failed or skipped, as any benchmark data is
of dubious value in such cases.
The latter change in behaviour requires a minor modification to the
badxml selftest, which now tests quoting of literal strings in xml test
output for both passing and failing benchmarks.
Finally, this commit also adds a new selftest specifically for verifying
correct behaviour for benchmarks that fail or skip.
Task-number: QTBUG-24313
Change-Id: I3426dc659a7511b62fd183a031c7235bc753f497
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Made test depend on subprogram to make sure it was there when
test ran.
- install signalbug subprogram
Change-Id: Ie0a19e52d131adcd17c97b263389aecffb81520e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Prior to this commit, when an unexpected pass occurred the test output
showed the message "XPASS : tst_foo::function() 'expr' returned FALSE",
where the problem was actually that the expression evaluated to true
when it was expected to be false.
This commit changes the output to make it clear that the expression
evaluated to true unexpectedly.
Task-number: QTBUG-22118
Change-Id: Id22c178073d3b75789675ca37a8ef019029b1f91
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
cb8445f032 removes an implied +1 from
document line height so we need to remove the compensating -1 from
image ascent/descent for image heights to be correct..
Change-Id: I310c06bcf1ce2eefef42c2828faa0eb435ad71cf
Reviewed-by: Yann Bodson <yann.bodson@nokia.com>
Reduce the thread and iteration counts to make this test execute faster.
This change reduces the runtime to 14 seconds (from 5 minutes, 38
seconds).
Change-Id: Id5ea056cfd33022da5a06809f0598a5cdb02b27b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
History of the development before the import:
ssh://codereview.qt-project.org/playground/mimetypes.git
Mimetype definitions come from shared-mime-info where available (UNIX systems),
loaded using a mmap'ed binary cache generated by update-mime-database.
As a fallback if no cache is found, we parse the raw XML files otherwise.
This makes the MIME type support fast and with very low memory usage on UNIX,
and it makes it easy to use on Windows (no dependency on shared-mime-info,
Qt even includes a freedesktop.xml file to use if none are found on the system).
Change-Id: I27b05008216ff936dc463bd80d3893422bfb940e
Reviewed-by: Richard J. Moore <rich@kde.org>
this was inconsistent with how qmake itself works, and was actually
wreaking havoc.
Change-Id: I5aa83cc88ffe7141cc0c31b03b76c48274f1ebdb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The visible property along with show/hideEvent tracks the
windows visibility from the application perspective and is
really a request. The exposeEvent() along with the isExposed()
accessor is used to notify the application of the actual
state of the window in the windowing system.
Change-Id: I7f5b7ed74a168e34aaa21ce0ae9042ddfb0bf6d8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Just implements what the note states (and removes the private function)
Change-Id: I9a6fd5134460712accf09ba01691df8b9b1f5d0d
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QEasingCurve internally holds the spline data in a
QVector<QPointF>. For the return from cubicBezierSpline(),
the vector is transformed into a QList<QPointF>.
This involves copying, and into an inefficient (for QPointF
payloads) container at that, so deprecate cubicBezierSpline()
in favour of a new toCubicSpline() returning the QVector
directly.
Change-Id: Ie4827fe7c6e289ad97a0b09772e47298779c76ca
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
All known processors and their variants/revisions are documented. I
added Q_PROCESSOR_MIPS_V based on the MIPS64 online documentation, which
documents MIPS64 as a superset of MIPS IV and MIPS V.
Change-Id: Ie2796d4f03499283aa2c96d60f5e37bd74a36ab0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Emit changed signal only if the clipboard is not owned,
in which case QClipboard does it.
Task-number: QTBUG-24184
Change-Id: I27420583a718a5f8cd93b9d361b1e422a75df300
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
If the DNS server returns a non authoritative host not found response,
then windows returns WSATRY_AGAIN error code.
This is now reported as HostNotFound and not UnknownError
Change-Id: I212985acd4e85ff4b2bdb6c57ec403405a7695fb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
- Save & Restore style and geometry when switching to
full screen and back since it is not a real state on
Windows.
- Obey the positioning policy in setGeometry.
Task-number: QTBUG-24185
Change-Id: I18dea4fd372e0b2e46273a7a27e0c6f4f4bde771
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
QtTBUG-22642 added about 25 new values for the Qt::MouseButton Enum.
This change adds documentation for the new values. Note that the
special value 'Qt::AllButtons' is documented at the top (next to
the other special value, 'Qt::NoButton'.) The new internal value
'Qt::MaxMouseButton' is listed as a \omitvalue.
Task Number: QTBUG-22642
Change-Id: Iaec623754156fff8a2c73e357fef82e1fe36354b
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Fixes non-namespaced builds.
Change-Id: I0ec3c29f58042313dfa864f15c2b2d47914cdedb
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The word 'momentaneously' does not exist.
Change-Id: I3d2201d5b7b3a01af5989bb1c3fcd55110d5482c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Till Adam <till@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Change-Id: I14ca7f8a377bca39004defc96d69d62c151181f5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Jeremy Katz <jeremy.katz@nokia.com>
QGlobalNetworkProxy (a singleton) had two phase construction, with
the second phase being called from QNetworkProxy's constructor.
This isn't necessary, and has been reported as causing deadlocks.
Although constructing socket engine handlers has side effects
(they add themselves to a list on construction and remove themselves
on destruction), this appears to be safe. The socket engine handlers
are only used while holding the list mutex, and any socket engines
created don't have any reference to the factory that created them.
With the new version, it is possible that two instances of
QHttpSocketEngineHandler and QSocks5SocketEngineHandler exist
temporarily if a Q_GLOBAL_STATIC initialisation race occurs.
This appears safe, because the loser of the race deletes its
handlers, which remove themselves from the global list as above.
Task-number: QTBUG-13088
Change-Id: I8cf520da717d8ab7d862ab89c6de13aea6d60ac3
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QNetworkAccessManager was ignoring the supplied credentials, although
webkit seems to support these urls at a higher level.
Following the behaviour of browsers:
We use supplied credentials if authentication is required.
We add supplied credentials to the authentication cache.
We emit authenticationRequired signal if the credentials were wrong.
We do not use previously cached credentials for that url
Synchronous http requests fail, if the credentials were wrong.
Task-number: QTBUG-18107
Change-Id: If46e8eab1511ba8a0f4bbe0d4efaabc4df0b8ab4
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In certain circumstances, this could cause the request to time out
(and repeatedly send bad authentication credentials to the server)
instead of failing with AuthenticationRequiredError.
Change-Id: Iff66b32f1d7268f21fd77b6620aae4b5d49d857f
Reviewed-by: Richard J. Moore <rich@kde.org>
This feature was implemented in 4.8, but documentation was not
updated at the time.
Task-number: QTBUG-18181
Change-Id: I657d7ab7aaf43b73b7bf8fd1cb76086522cf5c2b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Non-mutating functions can (potentially) be constexpr.
On top of that, they often make for more readable code.
Change-Id: I3547327cf5a7162737353a864a1025d0d02ccc2f
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Marked a bunch of tests insignificant, and skipped one crashing test
case in QApplication test, as that couldn't be made to pass simply by
marking the test insignificant.
Once the underlying issues are fixed, the tests need to be re-enabled.
Task-number: QTBUG-24203
Change-Id: I9aea4fa207d307793445efdcaead72219fbf6c4f
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
It has been superseeded by QPlatformTheme.
Task-number: QTBUG-24204
Change-Id: I8c4131c7bfd8201e747984d772ed8042610192b8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
A number of network autotests are unstable in Windows, so don't
generate check target for them as is done for mac.
Once the tests are acceptably stable, this needs to be reverted.
Change-Id: I18262e28ce40eba541aecf3cfb651bff34698ead
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The "check" target always depended on debug-check on projects that
explicitly loaded the testcase.prf, even if Qt was configured with
-release parameter. This obviously caused build failure. Changed the
testcase.prf to check which configuration is preferred using
CONFIG(debug, debug|release) like is done with similar cases in other
.prf files.
Task-number: QTBUG-24332
Change-Id: Ib5140b106e99efe51932bdd5a48914786de23230
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
- Add 'using namespace' to moc code as was the case in 4.8.
Change-Id: I26cba9ad74bf05eecc5205714c32c3176695e3b4
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove config.tests/mac/defaultarch.test, but do the same type of
default arch detection, only using the qmake binary instead of compiling
an empty file. Qt 5 will only support 10.6 and up, which means we
only support i386 and x86_64 now.
Change-Id: I24949ac803b965c523b1ee45cf769e266dcde134
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The first IP address on the machine might not be a usable one.
Changed the QLineEdit to a QComboBox, and populated it with
all IP addresses of the machine, along with the machine names
if they are configured.
Task-number: QTBUG-13121
Change-Id: I7c443f5ce6efb0d0b525c5abad1671d3dcbba33c
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Change-Id: I14706abb8441c153f738563cb1a46205fdb2dae6
QWindow::visible() did not follow the API guidelines.
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The default JSON file is /etc/user-dirs.json, but may be
overridden by setting PATH_CONFIG_HOME to the file to be used.
This provides functionality similar to the XDG based QStandardPaths,
but uses a JSON file to define paths, rather than the XDG A=B
format. Values other than HomeLocation and TempLocation may be
specified by removing the "Location" postfix, converting to upper
case, and separating words with _. Values are independent. For example,
CacheLocation does not depend on GenericCacheLocation.
Variables specified as ${[^{]*} will be replaced with environment
variables.
Change-Id: I374f5e6bae498dbfa9cb4ecadf915b05fb91fc34
Reviewed-by: David Faure <faure@kde.org>
This is similar to the focusColors() failures in QTBUG-23686.
Task-number: QTBUG-23686
Change-Id: I1f01a4e41e61a7a664309be34cfa4fe916a92b15
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test fails intermittently, and at random locations.
Task-number: QTBUG-24322
Change-Id: Ied6dd4d1593066debc0fb48c6ca2a17a1f4d51b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
