It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The following snippet in a .pro file resulted in a build error:
CONFIG += lrelease embed_translations
TRANSLATIONS += foo.bar_de.ts
The variable QM_FILES was incorrectly calculated. The extra compiler
that calls lrelease uses QMAKE_FILE_IN_BASE, which wraps
QFileInfo::completeBaseName(), resulting in "foo.bar_de.qm".
The $$replace call that calculates the .qm file name however, produces
"foo.qm".
Fix this mismatch by adjusting the regular expression to behave like
QFileInfo::completeBaseName().
Pick-to: 5.15 6.2
Fixes: QTBUG-79016
Change-Id: I545d1b58170cd5229007faf31c9b2c6f70ff75a6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
If automatic signing is enabled (which it is by default), then Xcode will
happily set up the required profile if you open and run the application
in Xcode. To get the same behavior for xcodebuild, and hence from Creator,
since it's calling our Makefile wrapper around xcodebuild, we need to
pass the -allowProvisioningUpdates flag to xcodebuild.
Fixes: QTBUG-95565
Pick-to: 6.2 6.2.0 5.15
Change-Id: I9325bb228bdfb4d07658eff8f41798f7b5a6955c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
By the time of Qt 6.2 release all new apps targeting Play store must
target API level 30 (Android 11) or above (starting in 08/2021 for
new apps and 11/2021 for existing apps' updates).
Pick-to: 6.2 5.15
Task-number: QTBUG-94451
Change-Id: Id7fa2fd62899a7259e365c917292c6c3ac0d2b0d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Add QEventDispatcherWasm to QtCore. The event dispatcher
supports managing event queue wakeups and timers, both
for the main thread or for secondary threads.
Blocking in processEvents() (using QEventLoop::WaitForMoreEvents)
is supported when running on a secondary thread, or
on the main thread when Qt is built with Emscripten’s
asyncify support.
Code is shared for all both modes as far as possible,
with breakout functions which handle main and secondary
thread as well as asyncify specifics,. Some functions
like wakeUp() can be called from any thread, and needs
to take the calling thread into consideration as well.
The current asyncify implementation in Emscripten is
restricted to one level of suspend, and this restriction
carries over to Qt as well. In practice this means we
support one level of exec()-like API.
Note that this commit does not _enable_ use of the
new event dispatcher. This will be done in separate
commits.
Task-number: QTBUG-76007
Task-number: QTBUG-64020
Change-Id: I77dc9ba34bcff59ef05dd23a46dbf1873cbe6780
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Make it possible to select the C17/C18 standard with
CONFIG += c17
or
CONFIG += c18
Pick-to: 6.2 5.15
Fixes: QTBUG-96026
Change-Id: I719d22366c3efda009118d58ead173a25ed285c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The compiler that comes with Visual Studio 16.8 added support for
setting the C11 standard with the /std:c11 flag.
Add the respective version check in msvc-version.conf and set
MSVC_VER and QMAKE_CFLAGS_C11 accordingly.
Pick-to: 6.2 5.15
Task-number: QTBUG-89296
Change-Id: I29b54ee073a765918f5aa4ebb081b97c5cf471d7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a release-only, non-framework Qt build on macOS. Building a
debug user project would fail, because qmake tried to link
against *_debug.dylib and *_debug.a libraries.
Building a debug user project that uses QtUiTools against a release-only
framework-build Qt posed the same problem. QMake tried to link against
the libQt5UiTools_debug.a, which does not exist.
Fix this by maintaining a list of library file candidates, and use the
first existing one (or just the first one if none exists). This favors
the library matching the user project's configuration but falls back to
the release version of the library if necessary.
Fixes: QTBUG-81251
Pick-to: 6.2
Change-Id: I8d641104718edb16500c6d6e3994e736fa5ddcf4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If QMAKE_APPLE_DEVICE_ARCHS is not set, we pick up the available archs
based on what Qt was built with (QT_ARCS), but only build the active
arch.
Pick-to: 6.2
Change-Id: I83273f878022af34a3a0d0eeae8b11d781f78c49
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Go with Emscripten’s default of not shutting down on
main() exit; this allows for writing main() in such
a way that avoids the exec() workaround.
Existing main() implementations (which do use the exec()
workaround) do not shut down Qt cleanly anyway, so we
gain little by shutting down the Emscripten runtime.
Applications can set this flag if they do want to shut
down on main() exit:
LFAGS += -s EXIT_RUNTIME=1
Change-Id: I52e1cc2bc907d1d2146822713e39b7610db3f95b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Make Emscripten generate a global constructor function
("createQtAppInstance()") instead of a global javascript
module object.
This enables more fine-grained control over module
instantiation; previously the module object would be
created when the runtime javascript was evaluated, and
the number of emscripten module/instances was limited
to one per page.
Set EXPORT_NAME to “createQtAppInstance” which avoids
collisions with other non-Qt Emscripten modules on
the same page. A further improvement would be to include
the app name in EXPORT_NAME, but this is not done at
this time.
Update the code in qtloader.js to call the constructor
function instead of working on a global module object.
The qtloader.js API is functional before the wasm and
Emscripten modules have been instantiated; store properties
and forward to the Emscripten module when it's created.
Change-Id: I12c49a5b9a4a932bbc46fcc5e5ecc453fd0fe7f0
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This fixes the "Command line is too long" error when building a project
with many object files for WASM on Windows.
Fixes: QTBUG-94032
Pick-to: 6.2 6.1 5.15
Change-Id: I29251da9795b267c968da86617da0311bf882a64
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This reverts commit c686e885c0
and commit d64abf8166.
We don't feature .qmake.cache/.qmake.super files anymore in the
source directory, so there's no problem anymore.
Change-Id: Ib820a109fbfbad70d85b0f14ef72915882217ca3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Now that inputs (81152194) and outputs (3f0858ed) are explicitly set for
the preprocess stage we can enable the new build system.
Using the legacy build system will produce a build error in Xcode 13,
but the build will succeed:
error: The Legacy Build System will be removed in a future release.
You can configure the selected build system and this deprecation
message in File > Project Settings.
Fixes: QTBUG-71035
Pick-to: 6.1 5.15 5.12
Change-Id: I108d2103872255d10de2ff5161eef892065da1c4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When dealing with a universal build of Qt, we would end up
using the QT_ARCH as the architecture for user projects,
but this architecture is always the primary one that Qt
was configured with.
Instead of relying on QT_ARCH, we start writing QT_ARCHS
(plural) to qconfig.pri, based on CMAKE_OSX_ARCHITECTURES,
and then use that to initialize QMAKE_APPLE_DEVICE_ARCHS.
We then resolve the active arch using uname -m, matching
what CMake does.
We still feed all the available architectures to the
Makefile or Xcode project, so that the user can build
for any of the available architectures without needing
a reconfigure.
Fixes: QTBUG-93760
Change-Id: I0d338241ba4d944ca36d85371e9c4df7dbc4f269
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This increases link time significantly; instead set
"-g4" or the new "-gsource-map" only if source maps
are enabled.
Change-Id: Ibe2d438d48e9ae2fce5f79d4e8a9f17c01cf2485
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
If we already have the list of Android ABI in BUILDS, it's not
necessary to generate extra resource while Qt build.
Amends: 58556afb69
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Fixes: QTBUG-88031
Change-Id: I344efe6c477461659a360281da59c4abeae18fc2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Xcode's new build system checks duplicated entries when building. Qmake wants to embed
the launch screen for all types of configurations (static libraries etc.) which makes Xcode bail
out with "Multiple commands produce LaunchScreen.storyboard".
Pick-to: 6.0 6.1 5.15 5.12
Task-number: QTBUG-71035
Change-Id: I5c028e687f16e046b12156c1a8a89540deba4d3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since we don't feature it for CMake, there's little point in keeping it
for qmake.
Pick-to: 6.1
Change-Id: I7f17d2536510c0b94dca9767036ceab7ec08e1d8
Reviewed-by: Tino Pyssysalo <tino.pyssysalo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Includes both minimum deployment targets and minimum sdk
versions.
As per supported Apple platforms versions which was done
in qt/qtdoc at
8807fdedce29cbbd7662fcd745234da30eace3fb
For Qt for iOS 6.0.x we only bump the minimum
deloyment target because applications seem to crash with iOS 12.4+,
and it's better to have a build error than a runtime error.
The minimum required sdk will not be bumped for 6.0.x, so we don't
accidentally break someone's existing build, given that 6.0 is already
released.
Pick-to: 6.1
Task-number: QTCREATORBUG-23574
Change-Id: I3046384164f2d7fdbd0cfd16dcb85e0d60bc56ce
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
To not disturb the qmake build we kept syncqt.pl in <src>/bin but
installed it to libexec. This is not necessary anymore.
This also removes the need for having syncqt.pl in both, bin and libexec
in the build dir of qtbase.
Pick-to: 6.1
Fixes: QTBUG-91076
Change-Id: I44b014ea41e3f00c420e02fd5c76f11169340b8c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
[ChangeLog][Build System] Tools that are called by the build system and
are unlikely to be called by the user are now installed to the libexec
directory.
This is a step towards easier co-installability of different Qt
versions.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: Id19575b5ba27795f7715e4ea6a09391b26dd4942
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This will be used to access host tools that are installed in
${prefix}/libexec instead of ${prefix}/bin.
Pick-to: 6.1
Change-Id: I36c4b5736330f8229d267a117c65d55cd5e12758
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fix condition when adding qmake_immediate to resources. This condition
was wrongly positive in any non-android case, but also had to check for
BUILD emptiness or build_pass. This cause issue because
qmake_qmake_immediate was added to the RESOURCES variable earlier, than
actually generated.
Fixes: QTBUG-88031
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Change-Id: I38dad858a7e81ab709e622ec24baa8f9b80970fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
comply with the api version used by default with androiddeployqt and
in docs. Google play also requires api 29 as minimum.
Task-number: QTBUG-90943
Pick-to: 6.1 6.0
Change-Id: I05e2a90b4d7f2120b0198e3fb7b8b1b2398eba93
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The macOS SDKs now follow the same major/minor version scheme as iOS,
where the major version is bumped for each OS release.
Pick-to: 6.0 5.15
Change-Id: I021421a9c58bb1ae64bc0c63b4215f14e4ada358
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qmake variable QMAKE_APPLE_DEVICE_ARCHS was added for iOS,
to support universal builds, as the QT_ARCH is a single value.
Since the qmake macOS builds are non-universal (at the moment),
we remove the hard-coded value for QMAKE_APPLE_DEVICE_ARCHS on
macOS, and let the normal architecture test resolve the arch,
like on other platforms.
To ensure that the following configuration tests are run with
an -arch argument, we trigger a commit of the preliminary Qt
configuration after running the architecture test. This is not
strictly necessary, but makes it clearer what's going on during
configure.
The device_and_simulator configuration option was used by the
iOS toolchain, and needed to be moved up in the configuration
test order to not break later tests.
The logic in mac/default_post.prf for both Xcode and Makefiles
to add -arch flags was kept as is, based on the existing
variable, to avoid too many changes to this logic.
The logic in toolchain.prf was amended to make it clear and
ensure that it only applies to iOS builds. macOS builds do
not have this issue.
Pick-to: 6.0
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I70db7e4c27f0d3da5d0af33cb491d72c312d3fa8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Play Store now accept only app with target
SDK version set to 29 or above
Pick-to: 6.0
Change-Id: If38f20c88fd6b0e6f29939cdf3d2eb793c0e1489
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Testing seems to indicate building against the 11.0 SDK works fine,
and doesn't opt in to any new behaviors on Big Sur that Qt isn't
ready for.
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I7da11cf25f2be7443c94ba7a4e9cd99dc1034455
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Updates due to newer compiler version in QNX7.1
Task-number: QTBUG-88300
Change-Id: If9bbc08d49a077d80174a1807e069b5d4ef61c0d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When doing static builds any project which uses same
libraries as qtbase 3rd party libraries will most likely
end up in broken binaries, since symbols will be
included twice. Moreover, libraries can have different
versions. Install 3rd party headers and meta data for:
* qtlibpng
* qtfreetype
* qtharbuzz
Pick-to: 5.15
Task-number: QTBUG-87154
Change-Id: I243dff9a12a95af20dee414f55bb762b8d579c81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
According to Microsoft's docs, /OPT:ICF is enabled by the
linker by default unless /OPT:NOICF or /DEBUG is specified.
If we are in RelWithDebInfo mode, /DEBUG is passed to the
linker to generate debug symbols, however, it caused the
identical COMDAT folding be disabled. We now pass /OPT:ICF
to the linker explicitly to prevent this.
[1] https://docs.microsoft.com/en-us/cpp/build/reference/opt-optimizations?view=msvc-160
Change-Id: I02099edb81034ace7bb19f1164d57829e3979a5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
