*Not* using /permissive- exposes Qt and client apps to interesting
bugs and/or build failures, (e.g. QTBUG-87225, or
19b5520abf). We demand strict
conformance by any other compiler, it's time to demand it from
MSVC too.
The Windows headers themselves are clean starting from the
Windows Fall Creators SDK (10.0.16299.0), and moreover Qt 6 will
drop WinRT; therefore, the comment in the mkspecs does not apply
any more.
Since /permissive- implies /Zc:referenceBinding, drop that
option. The other implied options are set on MSVC < 2017,
but I leave them in to avoid tinkering with the fragile lists
of C/C++ flags.
Rename the CMake internal helper function to better describe
what it does.
Fixes: QTBUG-85633
Fixes: QTBUG-85637
Fixes: QTBUG-85635
Fixes: QTBUG-88244
Change-Id: Ie03fddb61aa066fdc14b7231c22e7108b4a02fbb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qtdeclarative's QtQml module adds a dynamically generated qmldir file to
its RESOURCES which is located outside the source directory.
Previously this caused qmake to generate an invalid alias for the qmldir file.
Now the relative path is discarded properly.
Fixes: QTBUG-88204
Change-Id: Ia689d9d110db092cee595bf44fcbb6d57783fded
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Depending on the presence and behavior of HEADER_MODULE/header_module
in CMake and qmake land, the module.pri might end up with an empty
module line, which means adding the module via QT_PRIVATE += entrypoint
will not link to the static library.
To avoid this problem we write an explicit module entry (QT.foo.bar)
into the same module.pri file as the one generated by qt_module,
where the auto-generated one has header_module enabled, and hence
no link behavior, while the manually written entry has a module
component, and will ensure linkage to the static library.
Change-Id: Ib98484f74410fab45c4d109f3610028200fba0c5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The flags go before the library in the final linker line, as opposed
to the dependencies declared in LIBS.
This allows us to declare the flags for the entrypoint
in the project file of the entrypoint, instead of in
a standalone prf.
Change-Id: I35c054fe9fdaa6add7cd0e8ba3f7304f975ff80f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On the qmake-side we had exports, but they were quoted.
Change-Id: I95af4b927079691cab6403fec850f345ba181a00
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Beginning with Visual Studio 2017, vswhere should be used to discover
Visual Studio installations. Installations of 2019 and up are not even
registered inside the registry anymore, so vswhere is the only way to
obtain information about these.
Pick-to: 5.15
Task-number: QTVSADDINBUG-819
Change-Id: Ibd8b2c4d38c7925857887f39e750e87a33f08bf9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As a result of b5af140809 the link dependency to the
mingw32 static library was ordered after the entrypoint
library, which resulted in the WinMain symbol not being
found during linking due to how the static linker processes
archives.
Fixes: QTBUG-87725
Change-Id: I8e075f91f7f06dcdc618a4e0ae6d9c1d832888c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to ignore this option in qt_configure.prf.
This amends 077ea0c633.
Task-number: QTBUG-87049
Change-Id: If05b16a95d0830df9ca63961576981f8983820cc
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The use-case is relevant for other platforms as well.
Now that Qt has a module system we can also replace a lot of the
hand crafted logic for linking with simpler constructs.
Change-Id: Ib6853aaf81bfea79c31f2de741d65b4b56f23ef6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The code only existed to avoid the auto-generated
Q_IMPORT_PLUGIN(QIOSIntegrationPlugin), but nowadays
with bitcode enabled the code is not used, plus we end
up with this auto-generated file for other plugins anyways.
Change-Id: I91c8c88f4e825caab7d7d5250edaba8c57cb7374
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We want this in order to be able to export constexpr members.
Change-Id: I33ba7964ebee54fe656df983985d8d6fa0b99358
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The mkspec works with msvc 2019 as well. As 2017 is no
longer supported, we should reflect this reality in the
mkspecs naming.
Change-Id: Ib1165343d43fd50eebc5e4e598e653ddc4a9b1ab
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On Windows shell, using unix path format might not work, since the shell
expects backslash paths only.
Pick-to: 5.15
Task-number: QTBUG-87066
Change-Id: I51741b475c1ede11336df63ee1c6092c792c16ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove the stale Qt 5 CMake files.
Disable the generation of CMake files by the qmake build system,
it wouldn't create usable Qt 6 files anyway.
Keep mkspecs/features/create_cmake.prf and
mkspecs/features/cmake_functions.prf for now until we can confirm that
they are safe to remove.
Task-number: QTBUG-86827
Change-Id: Idcf59f4d7d5474171a9bf72904ff19adc8bc74cd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmlimportscanner and rcc in Qt 6.0 are part of the host installation
and not in the target installation which androiddeployqt expects it to be.
Fixes: QTBUG-86831
Change-Id: I9d7a6fce3d2f109bab933fcfd7fdd5d2c83821a8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
All system frameworks use 'A' instead of the major version of the
framework, and Xcode's code signing assumes that the framework version
is 'A' when signing embedded frameworks (FB7323980), so leave the
version 'A'. This is also what Apple recommends.
Change-Id: Idbf2e30e156c3e869da8f75731e568524d9407e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Clang doesn't automatically switch architecture just because we're
passing an iPhoneOS sysroot. In the past this resulted in a warning
about trying to link an x86_64 binary to arm64 libraries, but with
Xcode 12 this is now a hard error.
Fixes: QTBUG-86718
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I7e9d2ca513d276029fc2a6cfe694a35fe41c39b3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use -source 8 and -target 8 for javac by default.
Task-number: QTBUG-86282
Change-Id: I291beab4df166468972138822ca26f01c9666985
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The configure options -android-javac-source and -android-javac-target
can be used to set the version numbers.
Fixes: QTBUG-86282
Pick-to: 5.15
Change-Id: I36b0665de2c31e16bf6d138859b5503455eb8e66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
If '-make examples -no-compile-examples' was specified, sources of Qt's
examples would be installed, but the examples would not be built.
This switch has always been a source for confusion and is only
interesting for distributors, who can just package the examples
directory tree.
Change-Id: I0291d70e4951d98b553a4abf217db49d05316d3a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
It is not supported.
Warning: argument unused during compilation '-mthreads'.
Change-Id: I6de147c15dbf3c7f416b233e739ce2de183701af
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
AndroidManifest.xml file and the Android plugin already has a way
to provide commandline-arguments to app with the tag
"android.app.arguments". This change allow to set it from qmake/cmake
and allow Qt Creator to use that.
Task-number: QTCREATORBUG-23712
Change-Id: I3e680f40fd36ba6aaac7f344fb9509d2c3360e74
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Before this change, configure -force-asserts would affect qmake-based user
projects too, potentially forcing the user to remove the
QT_FORCE_ASSERTS define in their own projects.
[ChangeLog][configure] The -force-asserts option now affects the Qt
build only, not user projects.
Change-Id: Iecca3c9f7e8261996c5d8bcba8adbc0db1dc1c99
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
C4180, C4458 were disabled already in 2012, in commit 6668f5becf.
C4577 was disabled due to QtScript being compiled without exception
support in commit 97d7d80e73.
Anyhow, Qt Script is now officially gone in Qt 6, and Qt headers
do work just fine with C4180. Finally, C4458 is nowadays a W4 warning,
so not enabled in the first place.
Task-number: QTBUG-82615
Change-Id: I2f9b8e858817876b069a166129fbfac7ef3587a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When configuring with Qt only with one ABI, certain code paths were
not triggered, which led to a few issues:
- The deployment json file generated by androiddeployqt listed
no architectures.
- The compiled shared library did not have a lib prefix and arch suffix,
which androiddeployqt during the deployment / make apk step.
To fix the architectures missing in the json file, ANDROID_ABIS needs
to be set in android/resolve_config.prf also in the single abi case.
To get the correct file names, android.prf needs to apply the prefixes
and suffixes not only in the build_pass case (multi-abi) but also in
the single abi case (except for config.tests).
The application-binary entry in the json file needs to be without the
extra prefixes and suffixes though, so make a copy of the TARGET value
to be used in the json file, before the name manipulations are
applied.
Pick-to: 5.15
Task-number: QTBUG-85399
Change-Id: Idde92ab7fe883636ccc65a87b91c8a3fc72eefbb
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
QML2_IMPORT_PATH it's usually set by CI to tell the QML apps where to
find the QML components
Change-Id: I57d1cbc3d0fce9be257648268da0a5f9d61d81e9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
First and foremost the condition was wrong ...
In order to help running qml test cases on Android without any android
specific hack on
user's .pro files we copy the entire project folder to assets. I copy the
entire folder
and not only the tst_*.qml files because it might contain data which is
needed by the tests to run.
Change-Id: I06323d9d52904317410dd2f440de65a0766a48b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Before clang 9, it was enabled by default
when -fsanitize=undefined was set.
Pick-to: 5.15
Change-Id: I0faf3ae1901d4badc6d265fa8081185be4360636
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This amends 0ef46b41d8 to ensure the
new configuration is styled correctly for qmake.
Task-number: QTBUG-80938
Change-Id: Iebfff3ff0570d2e92d01d4eb1178c0d6261468f9
Pick-to: 5.15
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We don't appear to have implicit fallthroughs in our code anymore. The
last deprecated copies and redundant moves are also gone.
The other warning never had an explanation and doesn't show up when
building full Qt anyway.
Change-Id: Iad959315ad374ef288f5fffd15d683599a1a11b9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As stand-alone executables are not tracked by Launch Services,
which is responsible for applying the low-dpi override at runtime.
Change-Id: Ifac71dfa9b9ffa5ab1302dfca8fa1f5ddd491082
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
gcc doesn't report warnings for final methods since version 9.2:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78010
Change-Id: I7152351aac0e3bad86d777e119f25137ef97ec6f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
It doesn't understand the arguments we usually pass to testlib.
Change-Id: Iea83d1d8c31a510b2bc442cbfc810eac631322e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For those who are providing their own launch images for their iOS
projects then QMAKE_IOS_LAUNCH_SCREEN can be set to point to the
location where the launch image to be used over the default.
[ChangeLog][Platform Specific Changes][iOS] Added support for
specifying a launch image to be used for an iOS project. This can be
achieved by using QMAKE_IOS_LAUNCH_SCREEN.
Change-Id: Ibb236655b282132ab5eee747986a93abb9802200
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In Qt5, the -qtlibinfix option did not affect the naming of plugins,
unless -qtlibinfix-plugins was set. This option was added in
5641650993 to offer a way to have -qtlibinfix affect the plugin names
without changing the default behavior. We now remove the
-qtlibinfix-plugins option, as the old behavior is not desirable.
[ChangeLog][configure] The -qtlibinfix option now affects the names of
plugins. The -qtlibinfix-plugins configure option was removed.
Task-number: QTBUG-15192
Fixes: QTBUG-85439
Change-Id: I96f5c2577b76274929c431621967df0e9b4631b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It is only used by default on Windows, but can be enabled by setting
QMAKE_LINK_OBJECT_MAX.
The current file name is .project_name.
Use a sensible file name on this case.
Change-Id: Ic250d024e5feca739027c79a6e285d616234c4ea
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Apple deprecated the entire OpenGL API in favor of Metal, which
we are aware of, so we don't need to see the warnings when building
Qt.
Instead of applying the silencing globally for all Qt consumers,
both internal and external, we now limit the silencing to Qt itself.
That means user code that explicitly uses any of the deprecated APIs
will see the warnings. Note that this does not apply to merely using
any of the Qt OpenGL APIs. The user has to explicitly use the platform
APIs that have been deprecated.
The warnings need to be disabled on a build system level, so that
that they are passed as -D flags on the command line. If the defines
were done in Qt headers (qguiglobal.h e.g.), they would require the
user to always include this header before any of the Apple headers.
Change-Id: I3f2a2a5211332a059ad4416394251772c677fdcb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When building qtbase for iOS with CMake, and then trying to mix build
qtsvg with qmake, the value of MODULE_BASE_OUTDIR was wrongly set
to the host prefix because that usually coincides with the target
prefix when doing builds with just qmake.
That is not the case for CMake builds, where the host and target
prefix locations are necessarily different.
This caused syncqt to place the forwarding headers inside the host
prefix location instead of the target prefix location, and thus
compiling qtsvg files failed.
Make sure to use the target install prefix instead of the host one.
Task-number: QTBUG-82581
Task-number: QTBUG-84781
Task-number: QTBUG-85240
Change-Id: I592be0b2799c72c11497c8adc12be13106082cfc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
First of all cmake and qmake used a different standard.
Secondly, the qmake logic enforced lvl 23 (if it was installed which
is the case on the failing machine). When this is combined with
f71a400bf6 which requires lvl 28 API to build, the android build fails to compile.
cmake logic was even worse as it enforced lvl 21 API to be used if installed.
This change requires pick to 5.15 as f71a400bf6 was picked as well.
Pick-to: 5.15
Change-Id: I89a7193b711b8bf927d02907343a49d6f27082ce
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Remove the warning message that was introduced in 84f2792597.
It is triggered for debug_and_release projects that are built against
a single-configuration Qt. Silently fall back to the behavior before
84f2792597 like it always was the case.
Change-Id: I67ed1a145ec5d7a4047b0ce5ad43bf0fc6834d60
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CMake's default import library extension for MinGW is .dll.a. The code
in qt.prf that resolves the values of the QT variable expected an .a
extension.
To play well with CMake world we keep the the .dll.a extension for
Qt's libraries and teach qt.prf to handle both. In order to do that we
need to check for the existence of the .a or .dll.a file. If none of
these candidates was found we print a warning and fall back to the old
behavior.
Task-number: QTBUG-84781
Change-Id: If394f2d6acd104deb0c3a49240009a1900a506f7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This way the metatypes files are generated even if there are no
metatypes in the module. This is necessary in order to generate empty
QML modules, which in turn is useful if we only want e.g. URL
interceptors in a module, but not types.
Change-Id: Ief949cfebe831b69353a75d0da15ee347995051c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This option changes the order of include paths, which can cause problems
of various kinds. See https://bugs.debian.org/958479 for an example.
The benefit of that option is minimal for what it was intended.
Pick-to: 5.15 5.12
Change-Id: I80eeabd09764df290b60bc59aeb2f90d07723608
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Prefix framework builds of Qt that use the -qtlibinfix had wrong include paths
in qt_lib_XXX.pri files which broke compilation of user projects. We now honor
QT_LIBINFIX in qt_lib_XXX.pri files.
However, due to how framework includes work, module-style includes like
#include <QtCore/qstring.h>
still do not work. Use <qstring.h> or <QString> instead.
Fixes: QTBUG-84219
Pick-to: 5.15
Change-Id: I5314ee810e64cbba6dba06a84064d48bb4ff3377
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This also fixes source maps not getting created in debug mode.
Pick-to: 5.15
Fixes: QTBUG-83607
Change-Id: I3ed388c4fef6c286fa452a1c700fa65c2a8f9529
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Override request for debug info during compiler 'test',
otherwise call to dsymutil will fail call with /dev/null.
Use case here is to pass for example -glldb with CXXFLAGS.
Fixes: QTBUG-62953
Fixes: QTBUG-84467
Pick-to: 5.15
Change-Id: Ief8f987afb40d0b90da732195d67d476e7bb3aff
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Ubuntu 20.04 enables -fcf-protection by default.
PCRE2 10.35 sees this but complains that -mshstk is also necessary
to build its JIT. Detect whether the compiler is enabling Intel CET
automatically, and if so, build PCRE2 with the right options.
Pick-to: 5.15
Change-Id: I3440e689b81f4f07055f211a4fa7331a43eb410d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This marks the end of EGL and OpenGL ES support on Windows.
The concepts of -opengl dynamic, -opengl desktop, QT_OPENGL=software,
etc. remain unchanged, with the exception of the disapperance of
everything ANGLE related.
CMake builds now work identically to qmake on Windows: they default to
'dynamic' OpenGL on Windows, unless -DINPUT_opengl=desktop is specified.
On Windows, Qt 6 is expected to default to the "dynamic" OpenGL model by
default, just like Qt 5.15. This can be changed by switching to "desktop"
OpenGL, which will link to opengl32 (publicly, so other libs and applications
will do so as well) and disallows using another OpenGL DLL.
The "dynamic" mode is essential still because the fallback to a software
rasterizer, such as the opengl32sw.dll we ship with the Qt packages,
has to to work exactly like in Qt 5, the removal of ANGLE does not
change this concept in any way (except of course that the middle option
of using ANGLE is now gone)
When it comes to the windows plugin's OpenGL blacklist feature, it works
like before and accepts the ANGLE/D3D related keywords. They will
then be ignored. Similarly, requesting QT_OPENGL=angle is ignored (but
will show a warning).
The D3D11 and DXGI configure time tests are removed: Qt 5.14 already
depends on D3D 11.1 and DXGI 1.3 headers being available unconditionally
on Win32 (in QRhi's D3D11 backend). No need to test for these.
[ChangeLog][Windows] ANGLE is no longer included with Qt. Dynamic OpenGL
builds work like before but ANGLE is no longer an option. OpenGL proper
or an alternative opengl32 implementation are the two remaining options
now. Attempting to set QT_OPENGL=angle or Qt::AA_UseOpenGLES will have
no effect on Windows.
Fixes: QTBUG-79103
Change-Id: Ia404e0d07f3fe191b27434d863c81180112ecb3b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
If user's specified to build without examples we shouldn't silently
overwrite this. This might mean that some tests will fail to run then,
though.
Fixes: QTBUG-84087
Pick-to: 5.15
Change-Id: I53748fc03354ffdf015f85c93efc6e86c446adb8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of writing the hard-coded sysroot into the .cmake file, write
the variable ${CMAKE_SYSROOT}. This makes it possible to relocate the
build to a machine where the sysroot is different from the build
machine.
Fixes: QTBUG-83335
Change-Id: Iaa69feb9a140b050f6b5547929cc940ee0f039ce
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We now assume that source code is encoded in UTF-8 by default on
all platforms (and verify this with an auto test). Provide
a CONFIG+=no_utf8_source option for backwards compatibility.
[ChangeLog][qmake] qmake will tell the compiler that source code is
encoded in utf-8 by default. This mainly has an effect on Windows, where
MSVC still assumes source code is encoded in the current ANSI code page.
Use CONFIG+=no_utf8_source to get back the Qt 5 behavior.
Change-Id: I6dcafcaeefdea7d3907ccb723aeb7d23ccc0f04f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit c9d9ac5bb0.
This breaks prefix build which tries to link to install folder.
Task-number: QTBUG-83967
Change-Id: I084152afde91c2063154bef8ac99d7e997c9394b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fixes enabling of fPIC that got removed as a side-effect of commit 39fc377bf.
Fixes: QTBUG-83949
Change-Id: I2bed7edb5b1f97192cbcf9e12dd927a17803d864
Pick-to: 5.15
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Otherwise the helper-lib pri file will be unusable when installed.
Change-Id: Id79a61e6ca9bb1b32c82ee158fd18f51319c484e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When a configuration is static and has builtin_testdata defined, it was
possible that the "testdata" resource that is generated in testcase.prf was
used for a qmlimportscan directly. This generated test data resource is no
file though. It's a "qmake struct" that contains files and a base folder
so that we should add every file from the "file list" of that struct.
It is possible, that the generated resource has a base, but no files. Thus
we need two loops or we can end up with a command line that ends with
"-qmldir". If qmlimportscanner decided to warn/error out in this case in
the future this feature could be broken and the point of breakage might
not be obvious.
Change-Id: I2111f594f7d5cf40521b8fe9236a8be9e2ed1b07
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Apps on the iOS app store are required to use storyboards for their
launch screens from June 30th 2020.
Change-Id: Iae34042294fb167a2c893542c57dfaacaf1e929c
Fixes: QTBUG-83512
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
configure -no-compile-examples means that the examples won't be
compiled, but processed by qmake to generate install targets. So we
shouldn't do any substitution (like it is done for CMake targets), or
extra compilers / copies (like it is done for qmltypes).
Also install the qmldir files that some qml examples need.
Fixes: QTBUG-83375
Fixes: QTBUG-83704
Change-Id: I6a9393bd914d98a5d85f4089205510e49a435842
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The last release of glibc 1 was 1995 and can be considered outdated.
Also, the current check prevented building with e.g. musl libc.
Every file that includes common/posix/qplatformdefs.h already has
QT_SOCKLEN_T defined to socklen_t, so remove the definition from those
completely.
This is a continuation of 813f468a and a421e409.
Change-Id: Icf2692a8e814286487662e290a8f844872eefe53
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- 2019 still uses VCLIB version 140
- minVersion and maxVersionTested have to be set for every MSVC version
Change-Id: I9300e03115e2e99fd250ec85bdd7f3367ab00d48
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: André de la Rocha <andre.rocha@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
From 11.7.6 onwards you need to select if your build is rel/dbg/chk/cov.
Added env variable where you can add which build target to configure.
Task-number: QTBUG-74716
Change-Id: I9ab3dd6177c5c5fa1da6aa7556784fa86d0d0348
Reviewed-by: Timo Aarnipuro <timo.aarnipuro@qt.io>
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is basically a duplicate of the commit which fixed building with
musl, but on linux-g++, 813f468a14.
Change-Id: I399005ac6947ba3f2b4ed5087472cd9d54a0850d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Get rid of double negation to make the configuration easier to understand.
Change-Id: I5dfe256c2ac2ef131c3db20dce9ff492c529a5b1
Reference: https://emscripten.org/docs/tools_reference/emcc.html
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
In addition to .qmake.cache and .qmake.super we check for the
existence of CMakeCache.txt. The top-level non-prefix build part is
prospective, but seems plausible.
Without this fix, non-prefix qmake builds build libs etc. in the wrong
locations, i.e. not in a subdirectory of qtbase.
Change-Id: Ic88efa6c772d49ef92713fe640f004c8a5c849d3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For prefix builds the prl files of header modules still contained the
absolute path of the install prefix instead of $$[QT_INSTALL_LIBS]. This
was, because the QMAKE_PRL_INSTALL_REPLACE variable was only filled for
'lib' TEMPLATE projects. Header modules, however, have the 'aux'
template.
Fixes: QTBUG-82871
Change-Id: I90f248967f1bff41423d871a977ae91c78015bbd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The code that sets up QMAKE_RESOLVED_BUNDLE did not take QMAKE_BUNDLE_EXTENSION
into account. The logic is the same as in UnixMakefileGenerator::init().
Fixes: QTBUG-83222
Change-Id: I8fc4f16b399303394f2106e5c1071347ace93d4a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
