We were basically timing the qSleep, which is pointless. We don't need
to verify that qSleep(X) spends at least X time. Because it also
doesn't. Somehow, QNX can execute 1000 ms sleeps in 996 ms.
Amends commit 30e5ff3ff2.
Pick-to: 6.6 6.5
Change-Id: I46b5dede27114be29724fffd176a66c1799075b7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Pipes are unnamed FIFOs, so they're basically the same.
The difference here is that open() blocks on opening a FIFO until both
ends of the FIFO are opened. This helps us in synchronizing the two
threads and thus ensuring that that the read() system call deep inside
QFile does, indeed, block.
We see this with strace -T on Linux:
[pid 662956] openat(AT_FDCWD, "/run/user/1000/tst_qfile_fifo.2575572361", O_RDONLY|O_CLOEXEC <unfinished ...>
... aux starts up ...
[pid 662957] prctl(PR_SET_NAME, "QThread") = 0 <0.000004>
[pid 662957] openat(AT_FDCWD, "/run/user/1000/tst_qfile_fifo.2575572361", O_WRONLY|O_CLOEXEC <unfinished ...>
[pid 662956] <... openat resumed>) = 4 <0.000133>
[pid 662957] <... openat resumed>) = 6 <0.000011>
[pid 662957] clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=500000000}, <unfinished ...>
[pid 662956] read(4, <unfinished ...>
[pid 662957] <... clock_nanosleep resumed>NULL) = 0 <0.500183>
[pid 662957] write(6, "\2", 1) = 1 <0.000033>
[pid 662956] <... read resumed>"\2", 1) = 1 <0.500311>
Pick-to: 6.6
Change-Id: I63b988479db546dabffcfffd1766d7a48819b149
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We observe failures in CI on QNX because the measured timeout is ~995ms
rather than the expected 1000ms. Start the timer before the thread
starts to guarantee that at least as much time elapses as the thread
waits before writing the second byte to the pipe.
Otherwise, the thread might be sleeping already when the timer starts,
and then we can't rely on any measurements.
Pick-to: 6.6 6.5
Change-Id: I6072569a987f5e952b0953e0e394a223f891fd25
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
I got tired of being told off by the inanity 'bot for faithfully
reflecting existing #if-ery in new #if-ery. Retain only the
documentation and definition of the deprecated define.
Change-Id: I47f47b76bd239a360f27ae5afe593dfad8746538
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With the introduction of a new atomic variable the users should use the
class QNtfsPermissionCheckGuard or the helper functions
- qEnableNtfsPermissionChecks()
- qDisableNtfsPermissionChecks()
- qAreNtfsPermissionChecksEnabled()
to enable/disable permission checks instead of manually managing the
variable qt_ntfs_permission_lookup (which is a non-atomic variable and
as such prone to data races).
Also moved the variable qt_ntfs_permission_lookup to qfile.h to make it
clash with the user-side declarations the documentation suggested to
use (and it is probably also a better fit thematically anyway).
[ChangeLog][QtCore][Deprecation Notice] Deprecated the variable
qt_ntfs_permission_lookup to avoid race conditions while enabling or
disabling permission checks. It can be replaced by the RAII class
QNtfsPermissionCheckGuard or with the functions
qEnableNtfsPermissionChecks(), qDisableNtfsPermissionChecks() and
qAreNtfsPermissionChecksEnabled().
Fixes: QTBUG-105804
Change-Id: I93a563864ffb3f9945551c34004d8ca393603b25
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
qt_ntfs_permission_lookup is a global, non-atomic variable which
could cause problems in case of multiple threads. Introduce a
new atomic variable to handle permission lookups but instead of
manual incrementation/decrementation, implement a class to manage
the variable.
Since the atomic variable is not directly available to the user,
implement helper functions to increase/decrease/check the status
of the variable.
Task-number: QTBUG-105804
Change-Id: If6cbcdd653c7f50ad9853a5c309e24fdeb520788
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Removes a warning in the build.
Pick-to: 6.4
Change-Id: I07ec23f3cb174fb197c3fffd17215c40b40333cb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test was using the same tags twice each, giving no clue to the
difference between the two test-cases for each.
Change-Id: I645b01c0c4008a766e505047cb05cc22640ee129
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
On Unix, we have the fchmod(2) system call that changes the permissions
of an open file descriptor. This commit adds a test for that, by not
closing the QFile before setPermissions().
Pick-to: 6.4
Change-Id: If5d5ef6220874ae8858efffd171255b9f20ed501
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In theory, if we succeed, the permissions should be what we set, but
let's not make that assumption. And if we failed, it might be because
the file disappeared or something else, so re-stat()ing the file is a
good idea.
Pick-to: 6.4
Fixes: QTBUG-7211
Change-Id: If5d5ef6220874ae8858efffd171255506b7bbee0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unifies our approach to calling CoInitializeEx and CoUninitialize,
removing a lot of boilerplate in the process, and also fixes a few
bugs where we would incorrectly balance our calls to CoInitializeEx
and CoUninitialize.
The optimistic approach of qfilesystemengine_win.cpp of calling
CoCreateInstance without initializing the COM library explicitly
has been removed, as calling CoInitializeEx should be a noop in
the situation where it's already been loaded.
Change-Id: I9e2ec101678c2ebb9946504b5e8034e58f1bb56a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Windows VMs are provisioned with shared folders that are available as
\\${COMPUTERNAME}\testshare(writable)
so we don't need to access a remote SMB server over network anymore just
to test whether our string-parsing code handles UNC paths correctly.
Add a QTest::uncServerName() helper function to the shared filesystem.h
header and use that instead of QtNetworkSettings::winServerName. The
latter is now only used in tst_NetworkSelfTest::smbServer().
Pick-to: 6.4
Change-Id: Id0da66369ad0f4a980d612de2a31a391f1192253
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Microsoft recommends to use CoInitializeEx()
and SetWindowLongPtr()/GetWindowLongPtr() in new code.
Use COINIT_DISABLE_OLE1DDE to avoid overhead of
initializing and using obsolete technology.
Pick-to: 6.4
Change-Id: I9d16943e864d4487dd4f46fd9325579c298c52b9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Skipping moveToTrash() test is needed because WebOS
does not implement a trash bin directory.
Fixes: QTBUG-104053
Pick-to: 6.4
Change-Id: Id1d1595eb401d8ef3a403c915d95be1cd75368d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The new overload allows creation of files with non-default permissions.
This is useful when files need to be created with more restrictive
permissions than the default ones, and removes the time window when
such files are available with less restrictive permissions.
[ChangeLog][QtCore][QFile] Added QDir::open() overload that
accepts permissions argument.
Fixes: QTBUG-79750
Change-Id: Iddfced3c324e03f2c53f421c9b31c76dee82df58
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove at() and chmod() methods of MyEngine class. Those methods
are not used anywhere and look like remainder of old API to me.
Change-Id: I754a4281124cb8c9d74e79a9a2b99fb1b1f41e52
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove useless overrides of QAbstractFileEngine methods from the derived
classes. Also remove "This virtual function must be reimplemented by
all subclasses" passages from the QAbstractFileEngine's documentation.
There are pure virtual methods for such use cases. QAbstractFileEngine
already contains useful defaults for classes not supporting all the
functionality.
Change-Id: Ia25965854f3809b15d7502da3749cc2f3414bbc3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The decltype() of a const auto variable will be const T, for some
T. GCC warns that in the static_cast, said const is ignored.
Fix by not casting, but declaring a variable of fitting type. Add a
scope so the next reader doesn't have to go hunting for further uses
of 'readResult' or, now, 'expected'.
Change-Id: Iebc828a522810c6f2514fb3542d8c76c755ec7a5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Windows wants ISO C++ _fileno and _unlink instead of posix fileno and
unlink. For fileno we have the QT_FILENO macro in qplatformdefs.h, so use
it. For unlink we don't have a macro in Qt, so declare one in the test.
Change-Id: I56c5c3fb4e500769c744132c46107816f89bb2c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MSVC generates the following for those tests:
warning C4996: '_open': This function or variable may be unsafe. Consider using _sopen_s
instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online
help for details.
We need to set the define before any C runtime headers are included, so
do it right away, it doesn't do any harm on other compilers.
Change-Id: Ia25afb87934058c3f27e63820eeb2db063a627f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Android doesn't have a trash bin, so this test is not valid for that
platform.
Pick-to: 6.0
Fixes: QTBUG-89398
Change-Id: I119b25682ba18e18466b5687cae369445dc73311
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The Android tests were marked insignificant for some days, due to an
emulator issue, these tests slipped during that time. Exclude them now
to bring Android tests back.
Task-number: QTBUG-89398
Pick-to: 6.0
Change-Id: Ia65a0ae8d7474fd2554dda299a60371dbbc9dddb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apparently some library definitions went overboard, link them directly.
Pick-to: 6.0
Change-Id: I009737f7e3edff5619241b700a627dc4e25e6018
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
/dev/zero and /dev/null are expected to always be present in any system
(even containers). Unlike /dev/null, you *can* read from /dev/zero so
test that QIODevice doesn't think it is random-access because of that.
/dev/tty is also always present but has an interesting semantic. Could
also try /dev/full, /dev/random and /dev/urandom.
Change-Id: Ia2aa807ffa8a4c798425fffd15d84b60573f2c26
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This change only happens to files touched
by the commit to add missing ; to Q_UNUSED.
Task-number: QTBUG-82978
Change-Id: I10e6993a2bb3952cf9a262708b8573550e0dbe63
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
