Add a couple of previously excluded lines of code that should work for
all platforms.
Change-Id: I5f0b5365060a91cb708a3143b28f7de703fc419e
Reviewed-on: http://codereview.qt-project.org/6196
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed warnings just repeat information that is already in the
QSKIP's that immediately follow the warnings.
Change-Id: Id13158487e8075aab8a8f48955303edde3f4af63
Reviewed-on: http://codereview.qt-project.org/6194
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Q_CHECK_PAINTEVENTS was guaranteed to be defined prior to the code that
was conditional on it being undefined.
Change-Id: I8b48a2c6bff997de7d0e3f640203308718dd865b
Reviewed-on: http://codereview.qt-project.org/6193
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Calling qFatal may result in test output not being well-formed.
Change-Id: Ia16bade4d3311485c6ba4dd23d5624d18b192b71
Reviewed-on: http://codereview.qt-project.org/6190
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP already causes the test function that calls it to return, so the
returns removed by this commit were unreachable.
Change-Id: I1fa2f3a3271927d8a600b02d8b31bd81db9146b1
Reviewed-on: http://codereview.qt-project.org/6188
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Unix the table1 interface was replaced by the table2 interface, while
table1 is still used on other platforms. This commit changes the test
so that only the applicable test functions are built and run, where
previously both sets of tests were built and one set would always skip.
Change-Id: I5a785fb88fcbf4e5896e1fdb80c7c0a659597e34
Reviewed-on: http://codereview.qt-project.org/6097
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is so that the results of LayoutTests in WebKit are
more in line with what things were like in Qt 4.8.
Change-Id: I25962e03bd8e0316cb303c0d94c25ac4e73ea9a8
Reviewed-on: http://codereview.qt-project.org/6162
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
according to the Unicode specs, code point U+0085 should be treated
like a white space character (an exceptional Cc one)
Change-Id: Ib17ae0c4d3cdafe667cafa38b645138ef24c238c
Merge-request: 32
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-on: http://codereview.qt-project.org/6158
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
There were two fixes in 4.8 which each fixed a part of the problem.
Comparing canonical paths is more correct, but is only possible where
both directories exist. If neither directory exists, then compare
absolute paths instead.
Changed a regression test, because /tmp is a symbolic link on MacOS.
I.E. "/tmp/.." is canonically "/private" and not "/" as expected.
Task-Number: QTBUG-20495
Reviewed-By: joao
(cherry-picked from ad35d25e78c8252a72108a4ba931934047c4707e)
Change-Id: Ia4986e8337f0e512e1a3398a5a4dd36e62680b9c
Reviewed-on: http://codereview.qt-project.org/5813
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is in order to have a regression test for QT-5304.
However the test is also checking basic functionality of head
requests too.
Task-Number: QT-5304
Change-Id: I0d98bd1f1125ffd49d9f3c859a51b2aaee95379a
Reviewed-By: Martin Petersson
Reviewed-on: http://codereview.qt-project.org/6033
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
We can't rely on absolute paths when comparing directories for equality
as these don't take into account symbolic links and may also bypass ../
and ./ simplification.
Instead, canonical paths must be computed and can then be compared
according to the case sensitivity rules for the platform or file engine,
as is done in QFileInfo.
Task-number: QTBUG-20495
Reviewed-by: Prasanth Ullattil
(cherry-picked from dcee6e1371d899eb79717b8e3f3eec08b765db82)
Change-Id: Ib5f2a6ee11311c55782ea5dd0e9c3b45f9231686
Reviewed-on: http://codereview.qt-project.org/5812
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The QSKIP is only reachable on Mac, so only compile it for Mac.
Change-Id: I268e87829e01755051f81cdaf856d936b04b3d49
Reviewed-on: http://codereview.qt-project.org/6091
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTestLib already makes a superior version of this functionality
available to all tests, without the need to recompile. Each qtestlib
test program can be passed, via the command line, a list of test
functions and test data tags to be executed instead of executing all
test functions.
Change-Id: I1b54fc70a0c58a17209817afabfb953b5748dac4
Reviewed-on: http://codereview.qt-project.org/6015
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Omit focusColors test function at compile-time in preference to
skipping at run-time. Also removed commented out code.
Change-Id: Ib8955656f5a43b30df95b4c9865e52902dbd6b1e
Reviewed-on: http://codereview.qt-project.org/6010
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove empty constructor/destructor. Remove dropDownDeleted test
function which has been entirely skipped since before Qt 4.0, is
obviously incomplete (it attempts to use a QComboBox that does not
exist) and provides no statement of intention that might allow the
incompleteness to be addressed.
Change-Id: I4975b6d5a5dde1e58dab1dd393be92eddeb4c9f8
Reviewed-on: http://codereview.qt-project.org/6009
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test was a no-op on Mac OS. It's better to avoid building or running
it on Mac OS, rather than spending time compiling and running a test
that does nothing on that platform.
Change-Id: I4aa579036788e404f8a6a8f1a80acd32338fb3cd
Reviewed-on: http://codereview.qt-project.org/5958
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This also uncovered a missing implementation of child for
dock widgets.
Change-Id: Iac4c5a51d4626769af11b277a9a345e1e31dc490
Reviewed-on: http://codereview.qt-project.org/5987
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
The operator tested by this function (QMatrix * QRect) has not existed
since Qt 2.x.
Change-Id: Id09154de2bdda70c0fe342fe78b82709953e2b56
Reviewed-on: http://codereview.qt-project.org/5965
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test was being skipped one test function at a time on IRIX. It's
better to avoid building or running it, rather than spending time
running a test that does nothing on that platform.
This commit also turns a silent skip on other platforms into an explicit
QSKIP to make it more obvious that there's an unfixed TODO there.
Change-Id: I7cae4f0f2eaebf5977a781b2ce15d1e71ef13b36
Reviewed-on: http://codereview.qt-project.org/5957
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The unprintablenames test was designed to prevent an old failure in
QDir from returning, but the test can't be run reliably on some
file-systems and certainly isn't going to achieve its goal when it's
commented out.
Change-Id: Ib4cb965d59c291ab2436130b87e865ac21b9b483
Reviewed-on: http://codereview.qt-project.org/5956
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Renamed QGuiApplication::activeWindow() to
QGuiApplication::focusWindow(), implemented QWindow::isActive() as a
style hint, and added focus in / out events.
Change-Id: I71866e76c5a817def3e17bcc20a4fc32081a0e7a
Reviewed-on: http://codereview.qt-project.org/5811
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I582732e3dd657df834f9a98fd52d7ee368f2f29b
Reviewed-on: http://codereview.qt-project.org/5946
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: Ib2025339422749cf216e87ac414a3056250bf8f9
Reviewed-on: http://codereview.qt-project.org/5942
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Functions that modify the d-pointer must detach or otherwise take
measures to not modify the const, read-only shared_null.
The setSharable(bool) function takes care to detach when setting
sharable to false, but should avoid setting the sharable data member
unless d is not the shared null.
Similarly, QMap<Key, T>::setInsertInOrder() needs to detach if it is
shared with the shared_null (the logic has been updated to be the same
as setSharable()).
Change-Id: Ida5cb9818b86695f1b9f0264418b955c56424898
Reviewed-on: http://codereview.qt-project.org/5929
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I21664d8d92b27c26c64789fc08d0ec7b8988456a
Reviewed-on: http://codereview.qt-project.org/5941
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QPixmapCache has until now refused to throw out shared pixmaps, i.e.
ones that still have shallow copies lying around. This leads to problems
when someone inserts two shallow copies using different keys, causing
the cache itself containing multiple shallow copies and thus forever
refusing to throw out those entries.
It's rather easy for this to accidentally happen in a user application
since QPixmap::load() or QPixmap(const QString &fileName, ...)
automatically cache the pixmap in the QPixmapCache, thus if the user
then calls QPixmapCache::insert() on the same pixmap or a shallow copy
it is locked in the QPixmapCache forever.
The only reason for not throwing out a pixmap that's shared would be to
prevent re-loading a pixmap from file when a user has a direct reference
to it in his application, but in that case the user is unlikely to
re-load the pixmap from file in any case. Therefore it seems the best
fix is to get rid of this limitation.
Task-number: QTBUG-21359
Reviewed-by: John Brooks
Reviewed-by: Olivier Goffart
(cherry picked from commit 7ab0bed3a56d46c386e65abc381264c57137cb43)
Change-Id: I46dce19227e19a25e0287cf7372177430da15a66
Reviewed-on: http://codereview.qt-project.org/4563
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Most of these changes are search-and-replace of d->ref ==, d->ref !=
and d->ref =.
The QBasicAtomicPointer in QObjectPrivate::Connection didn't need to
be basic, so I made it QAtomicPointer.
Change-Id: Ie3271abd1728af599f9ab17c6f4868e475f17bb6
Reviewed-on: http://codereview.qt-project.org/5030
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test was fixed by 1cc70b92c8
Change-Id: If6fa3724f7c31e952ebff1dd27fea1a1e4635a85
Reviewed-on: http://codereview.qt-project.org/5783
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
This test was fixed by db3418c10b
Task-number: QTBUG-21125
Change-Id: I1bc549353f16c0df2b6c33533298b302fcc4d4ed
Reviewed-on: http://codereview.qt-project.org/5877
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I31e069f5476f8adf9851e94b33c6afac4394b88e
Reviewed-on: http://codereview.qt-project.org/5824
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
