QDateTimeEdit very aggressively prevents user input that would result in
values that are outside the dateTimeRange. While keyboardTracking is on
this makes sense, as otherwise the dateTimeChanged signal would be
emitted after each section, with a value that is outside the range.
However, this prevented users from entering a date that is allowed, but
where sections of the date are above or below the respective section in
the maximum or minimum value.
If keyboardTracking is off, QDateTimeEdit only emits the dateTimeChanged
signal at the end of editing, when focus is lost or the return key is
pressed, and then it enforces that the value is within the range anyway.
This change makes the parser ignore the range during editing if
keyboardTracking is off, thus allowing the user to enter a date where
temporary values are outside the range.
The test makes sure that we don't get signals emitted with out-of-range
values, testing both with and without keyboard tracking.
Change-Id: I00fb9f1b328a3477163f890c4618b40878657816
Fixes: QTBUG-65
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Keypad navigation within a group should work for auto-exclusive buttons,
or for checkable buttons that are in a button group. Since the code
already tests whether the button should be treated like an exclusive
(which implies checkable) button, use the result of that test when
finding the candidate button to move focus to, and not only when
actually changing the checked button and the focus.
Change-Id: I4dc41a90d51a8304483046252ceff0ebfe2a2e52
Fixes: QTBUG-27151
Done-with: david.faure@kdab.com
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Test fails on MinGW 8.1 x86, but not on MinGW 8.1 x86_64.
Task-number: QTQAINFRA-3304
Task-number: QTBUG-69947
Change-Id: Ie9a35bd6d5a8481028cd0ea426d1cf00bd7cf093
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QSet and std::(unordered_)set were so far not treated as appendable, as
they lack a push_back method. We do however need support for this in
declarative to enable converting back from QJSValue arrays to sets.
We achieve this by testing for and using the insert method. While vector
has also such a method, it doesn't take a single value, but rather a
position or iterator + value, so the template specialization is not
ambiguous.
Task-number: QTBUG-82743
Change-Id: I74fc7b1b856d9bcd38100b274ba2b69578ea8bbb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The call of _control87 would crash because of the previous test.
Change-Id: I254efe9c2e9892a473a02663e5ff7016791d5d6d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
tst_QSocks5SocketEngine::simpleConnectToIMAP() is flaky. It may be
useful to log the socket error, to provide more info in case the
test fails again.
Change-Id: Ia5518dce13fd9da1fa5bfb3d5cf3a52a908b8698
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Sometimes this test would fail due to the session not actually being
reused. The cause of this was that the requests were sometimes being
completed 1-by-1, enabling the individual requests to re-use the
already-connected socket completely because it stayed connected.
Setting the Connection-header to close lets us be sure that
the socket cannot be re-used when the request is finished.
Fixes: QTBUG-82846
Change-Id: I5da8baa50a3a45fb60f1e1613e500e3e9c034fb0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
drawTree() does
QPoint hoverPos = d->viewport->mapFromGlobal(QCursor::pos());
d->hoverBranch = d->itemDecorationAt(hoverPos);
and itemDecorationAt does
const QModelIndex index = q->indexAt(pos);
which might very well be an invalid index.
Change-Id: I7db98871543bd7e1c57fcc475d2646757bf2bb42
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
qDecodeMYSQLType() did not handle FIELD_TYPE_GEOMETRY and therefore the
type for a POINT column was incorrectly treated as QVariant::String.
Even the type can not (yet) be properly decoded to a QPoint, treating it
as QVariant::ByteArray is the better option here.
Fixes: QTBUG-72140
Change-Id: I12e75b326ae3acb75cb36f2e650464528bd43c0e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Include WordBreakTest.html, since a test uses sample strings from it,
albeit without actually reading the file.
Had to comment out more of the new tests, as at Revision 24, pending
an update to harfbuzz and the text boundary detection code.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Task-number: QTBUG-82747
Change-Id: I0082294b09d67ffdc6a9b5c15acf77ad3b86f65f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This has been flaky on OpenSuSE; if the stored geom.topLeft() is 0,0
it apparently means the window manager (probably kwin) didn't get around
to decorating and repositioning the dialog by the time
qWaitForWindowExposed() returns. Because we check later to see whether
it moved, we need to be certain of its initial position.
Waiting for the extra "fleece" widget to be shown was based on the
theory that by the time the X server has processed messages related
to that new window, the WM should be done processing the consequences
of the resized dialog window. But there's no such guarantee, so let's
try removing that. On the other hand, removing the delay does open
us up to miss a regression (maybe the dialog gets moved after we have
checked that it didn't move).
Rename because we don't name autotests after bugs.
Amends 26ddb586ac
Task-number: QTBUG-32473
Change-Id: I6bbfe2b4baaee389db0d4112f0fec3b7cb9da554
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Use QTRY_COMPARE in the flaky tests instead of waiting.
Change-Id: Ic18fc5fde3fa47f3b3ef21e6acd876bd6990981d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This exercises the multi-threaded codepath and also tests precision
a bit higher.
To avoid quadratic blowup, only a short set of formats are tested in
the larger conversion tests.
Task-number: QTBUG-82818
Change-Id: I411deb97aea61a69fbdb24cbaf6559dd9436b703
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We are, arguably, not testing QProcess and its ability to start or finish,
we test QUdpSocket. If, for some reason (as we discovered on some
specific machines recently) the process does not start or does not produce
any output (canReadLine), we QSKIP instead of failing. Also, all those
QCOMPARE will bypass the part there we stop processes - so must be
RAII-protected.
Fixes: QTBUG-82717
Change-Id: Idfb0d4a483d753f336b3827875eeaf51c79270e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The effect of the soft-hyphen needs to be updated once the final the
break point has been found.
This change cleans the logic by using two variables keeping track of
soft-hyphen at current evaluated position and at last confirmed break
point. Also adds tests for supression of soft-hyphens in the tight
WrapAnywhere case.
Fixes: QTBUG-35940
Fixes: QTBUG-44257
Change-Id: I7a89a8ef991b87691879bb7ce40cec4a3605fdd5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QLinkedList has been deprecated, but we still need to test it. Suppress
the warnings for QLinkedList used in tests. Note, that I had to move
some of the test code, to avoid repeating
QT_WARNING_PUSH/QT_WARNING_POP everywhere.
Change-Id: I4203b3ef50045c4f45475a08638dbdc60f68761d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Introduces a new QRhiShaderResourceBinding function that takes an array
of texture-sampler pairs. The existing function is also available and is
equivalent to calling the array-based version with array size 1.
It is important to note that for Metal one needs MSL 2.0 for array of
textures, so qsb needs --msl 20 instead of --msl 12 for such shaders.
Comes with an autotest, and also updates all .qsb files for said test
with the latest shadertools.
Task-number: QTBUG-82624
Change-Id: Ibc1973aae826836f16d842c41d6c8403fd7ff876
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
- QLoggingRule::parse() and the ctor take pattern as QStringView
- parseNextLine takes lines as QStringView and produces the pattern as
QStringView for QLoggingRule
- (setContent has to wait for QStringTokenizer)
- QLoggingRule::pass()'s first argument is always QLatin1String, so
take it as one
Use chopped() more, add a std::move().
Change-Id: Ic95ea77464a9922fef452846bc6d5053bd5de56e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
No surprises, as char16_t is transparently handled by QChar overloads.
Ok, one surprise: we seem to have QChar <> QByteArray relational
operators, but they don't work for char16_t. Probably members of
QChar, so LHS implicit conversions are disabled. Didn't investigate,
because it needs to be fixed at some point anyway, but that point is
not now.
Change-Id: I74e1c9bdd168e6480e18d7d86c1f13412e718a32
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... to not fold QChar tests into QString ones.
This is needed for adding char16_t tests.
Change-Id: I2507d7d68a39ff96cf033eadde10e383dc976dda
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In QByteArray, they were just not marked as such.
In QString and QStringRef, the implicit conversion from QChar to
QString would destroy it. Add a QChar overload, delegating to
QStringView.
Added docs for the new overloads, copying from the nearest neighbor so
as to not look out of place. All string classes use different wording
for these functions. A cleanup of this state of affairs is out of the
scope of this patch.
Change-Id: I0b7b1d037aa229bcaf29b793841a18caf977d66b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test was fixed and metrics show no flaky failures anymore.
Task-number: QTBUG-58713
Change-Id: I50c0844db099f45bb5b7ca51a510bf0318554c44
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
resolve() is technically thread-safe if the library has been loadaed. We
don't promise that, but it's there. More importantly, because
QLibraryPrivate is shared among QPluginLoader and QLibrary that point to
the same file, we can't thread-safely set the error string.
[ChangeLog][Important Behavior Changes] QLibrary::resolve() will no
longer set or clear the error string based on the success of finding the
symbol. The error string will reflect the result of loading the library.
Change-Id: I46bf1f65e8db46afbde5fffd15e1a4f4c2713c17
Reviewed-by: David Faure <david.faure@kdab.com>
d7cb21ac08 change the way a double is
converted which resulted in less precision.
Fix it by explictily setting the precision in QString::setNum()
Task-number: QTBUG-80068
Change-Id: I1fd9d00837155ceb707e84bfeb9deff03b5ab57e
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When _NET_WM_STATE_HIDDEN is not contains in the _NET_WM_STATE
window property, the window should not be considered to be minimized
According to
https://specifications.freedesktop.org/wm-spec/1.3/ar01s05.html
_NET_WM_STATE_HIDDEN should be set by the Window Manager to indicate
that a window would not be visible on the screen if its desktop/viewport
were active and its coordinates were within the screen bounds. The
canonical example is that minimized windows should be in the
_NET_WM_STATE_HIDDEN state. Pagers and similar applications should use
_NET_WM_STATE_HIDDEN instead of WM_STATE to decide whether to display a
window in miniature representations of the windows on a desktop.
For mutter/GNOME Shell, without _NET_WM_STATE_HIDDEN, window manager
will not reply XCB_ICCCM_WM_STATE_ICONIC settings in WM_CHANGE_STATE
client message.
Task-number: QTBUG-76147
Task-number: QTBUG-76354
Task-number: QTBUG-68864
Done-With: Liang Qi <liang.qi@qt.io>
Change-Id: Ic9d26d963979b7f0ef4d1cf322c54ef8c40fa004
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This patch adds the arrow operator to the stl-like key-value
iterator (QKeyValueIterator) for QMap and QHash.
This allows using normal member access syntax it->first and it->second
instead of having to use (*it).first and (*it).second.
[ChangeLog][QtCore][Containers] Added operator-> to the key-value
iterator for QHash/QMap.
Change-Id: I9cfa6480784ebce147fcfbf37fec5ad0080e2899
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
QMenu hides regularly when the user interacts with it, and manages
the firing of signals based on that. It ignores if a QAction that is
added to it fires the triggered() signal programmatically.
With QWidgetActions added to the menu, the menu usually doesn't get
interacted with directly, as the widget gets the input events.
Since the action can be added to multiple menus, neither widget nor
action can interact with the menus programmatically. Instead, the
menu needs to hide when the widget action triggers.
Test included that covers the case where a QWidgetAction is added
to multiple menus that are visible. Documentation updated, and
removed a redudant paragraph as a drive-by change.
[ChangeLog][QtWidgets][QMenu] a popup menu hides when a QWidgetAction
added to it fires the triggered signal.
Change-Id: I69f378426a45c2e46cebdaa5e6f1b21c8fb03633
Fixes: QTBUG-10427
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is a follow-up to commit 895939c7f9
to fix deprecation warnings it added.
Change-Id: I3d86655ec2c84c1bdcac9c70436075fc78f2f781
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is the first time that we add something to QShaderDescription
after migrating to the non-JSON based serialization system. This now
involves checking the "qsb version" when deserializing.
Task-number: QTBUG-82624
Change-Id: I2bd875ef21e461559b878dccc5537cdfa43feaa2
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I399b5ea56e9255e775ca1746632f7421519a6616
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I3f1b836cfb47bba0fdc27f2c3aa7b0576d123dca
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I446f9ddc8f8de4a0b79b09edb44f7c1496fbc33f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of comparing to absolute values, compare the result from
QDeadlineTimer with the reference clock types from std::chrono. Pass
the test as long as we are within 10% of that reference.
In addition, handle the case where QTest::qSleep sleeps for more than
10% longer or shorter than what is requested, and if so, abort the
test.
Change-Id: If8b77aea55a8c5c53e96427b2fff2f78281d0f82
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was possible to end up with a dangling pointer in m_listStack.
This is now avoided by using QPointer and doing nullptr checks before
accessing any QTextList pointer stored there.
We have 2 specimens of garbage that caused crashes before; now they don't.
But only fuzz20450 triggered the dangling pointer in the list stack.
The crash caused by fuzz20580 was fixed by updating md4c from upstream:
4b0fc03077
Change-Id: I8e1eca23b281256a03aea0f55e9ae20f1bdd2a38
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
This reverts commit ccb2cb84f5 and
commit 0f568d0a67.
The patches fix ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commits to keep the getter as is and change the signal name instead.
Change-Id: Iddbab7c33eea03826ae7c114a01857ed45bde6db
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
During a spring forward, a time-zone omits an hour. A QDateTime with
such an hour is invalid, but QDateTimeEdit's handling of this invalid
time was not done correctly.
With this fix, up/down changes of any field that would result in an
invalid date-time corrects the time to be valid, while leaving as
much as possible of the user-entered data unchanged. To do that, we
rely on QDateTime::toMSecsSinceEpoch to return a value even for such
an invalid time, which then can be used to construct a valid
QDateTime.
Edits that would result in an invalid hour are reverted to the
previous when pressing return, if correctionMode is
CorrectToPreviousValue. This change also implements support for
CorrectToNearestValue, which uses the same mechanism as when stepping
over an invalid time.
Include a test that verifies that the various interactions result
in a reasonable value. Since QDateTimeEdit does not respect the
timezone or timespec of the QDateTime it is initialized with, we
have to find the first hour of daylight saving time for a year
that we know works for most time zones. Failing that, we have to
skip the tests. Verified in a wide range of time zones.
Change-Id: I05b906ae3b5f6681891d23704f00f9c10cd479ae
Fixes: QTBUG-79803
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As per the ### Qt 6 comment. A method visitedPages should, following
the convention of the other QWizard APIs, return a list of QWizardPage
pointers. Since the method returns a list of IDs, visitedIds is the
correct name.
[ChangeLog][QtWidgets][QWizard] visitedPages has been deprecated, use
visitedIds instead.
Change-Id: Ifdb94adf093be14cb48c84cb40818c55ff5189a0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
