Add painting of sets of lines, both connected and unconnected, that go
outside the device area.
This prepares for fixes & improvements in the painting code.
Pick-to: 6.2 6.1 5.15
Change-Id: I9cffc760524e9ade42362c9a04949270ac24180f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
SetProcessDpiAwarenessContext() returns ERROR_ACCESS_DENIED if the
DPI awareness has already been set, and not E_ACCESSDENIED like
SetProcessDpiAwareness() does.
Pick-to: 6.2
Change-Id: I6b29214773776f31c0622a35494d98c5c9637b0b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We're passing -Oz for release builds, but that's not a flag the linker
understands when -ltcg is enabled. The build fails with:
ld.gold: fatal error: Optimization level must be between 0 and 3
Fix this by using -O2, which -Oz is based on, and -O3 for the "full
optimization" that is used for core and gui.
Pick-to: 6.2
Fixes: QTBUG-89472
Change-Id: Ie1a86888baefce5ca97026e7d635f10d2819f9f4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On macOS, we close active popups when handling mouse-down events in the
NSView, but not for such events in the window frame. This allows users
to close a window that has a context menu open via the window's close
button, which then leaves open popups behind.
Factor the popup-closing code out into a dedicated method that we can
call from within the NSWindow::sendEvent implementation for mouse down
events.
Fixes: QTBUG-30522
Pick-to: 6.2 6.1 5.15
Change-Id: I9c354efc449cfefff3ed84fa34b1cd8a0da3b4a7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For better overview of the flow and functionality of the
NSTextInputClient protocol.
Pick-to: 6.2
Change-Id: I8658405c7ff4ae762bfe3e4c11f9a157ae2b9a09
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Instead of going via QNSView. Also add some logging.
Pick-to: 6.2
Change-Id: Iabed7511572ef22597651efa8047f06227b28533
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The tests can now be built with qt-cmake-standalone-test.
Change-Id: I098340a9f755806061de281fbc25cb00c61f33f0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
After enabling -s MODULARIZE=1 there is no longer a
global ENV. Use module.ENV instead.
Change-Id: Ic6958f52c6ceb7014f7f2c78a73f2bce5a43bf41
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Previously, this was implemented in QEventLoop. By moving
it to the event dispatcher we can target the warning message
better and provide a suggested workaround for the dialog
case.
The behavior is the same as before: call emscripten_sleep(),
which throws a Javascript exception and returns control
to the browser while leaking the content of the stack.
Pick-to: 6.2
Change-Id: I2979fe4fe5923c27713e85b6725614b60a693e93
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
like windows, we dont have historical time data
Change-Id: Iab77c1e2949bc909324f18209e6c52324c80a548
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Pass Qt6_FIND_VERSION to components when the
find_package(Qt6 ${ver} COMPONENTS Foo) signature is used.
Create a ConfigVersion file for BuildInternals, so that BuildInternals
passes the version check.
Fix qt_configure_file to look in the _qt_6_config_cmake_dir folder for
the template file rather than Qt6_DIR, because Qt6_DIR might be
accidentally unset after a failed find_package(Qt6) call and the error
is not helpful then.
We already pass versions everywhere else when looking for
dependencies, like in ModuleDependencies.cmake.in,
PluginDependencies.cmake.in, ModuleToolsDependencies.cmake.in.
Pick-to: 6.2
Fixes: QTBUG-91737
Change-Id: Ief1da0c6f239c935385e7ce662951e85ccfdf130
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QT_ADDITIONAL_PACKAGES_PREFIX_PATH variable was introduced to
allow specifying extra locations to find Qt packages.
The reason it was introduced instead of just using CMAKE_PREFIX_PATH
is because the Qt6 component find_package call uses NO_DEFAULT_PATH
which means CMAKE_PREFIX_PATH is ignored.
We use NO_DEFAULT_PATH to ensure we don't accidentally pick up
system / distro Qt packages.
The paths from QT_ADDITIONAL_PACKAGES_PREFIX_PATH are added to the
find_package PATHS option in the Qt6 package, each
ModuleDependencies.cmake file and some other places.
Unfortunately that's not enough to make it work for cross-builds.
Imagine the following scenario.
host qtbase, qtdeclarative installed in /host_qt
target qtbase installed in /target_qtbase
target qtdeclarative installed in /target_qtdeclarative
We want to cross-build qtlottie.
We configure qtlottie as follows
/target_qtbase/bin/qt-configure-module /qtlottie_src -- -DQT_ADDITIONAL_PACKAGES_PREFIX_PATH=/target_qtdeclarative
We expect the target QtQuick package to be found, but it won't be.
The reason is that QT_ADDITIONAL_PACKAGES_PREFIX_PATH is added to the
PATHs option, but we don't adjust CMAKE_FIND_ROOT_PATH.
Without adding the new paths in CMAKE_FIND_ROOT_PATH, CMake will
re-root the passed PATHs under the existing CMAKE_FIND_ROOT_PATH,
which is QT_TOOLCHAIN_RELOCATABLE_INSTALL_PREFIX, which evaluates to
/target_qtbase. There is no QtQuick package there.
To fix this, prepend the values of QT_ADDITIONAL_PACKAGES_PREFIX_PATH
to CMAKE_FIND_ROOT_PATH.
The location where we currently do CMAKE_FIND_ROOT_PATH manipulations
is in the qt.toolchain.cmake file, so to be consistent, we prepend the
new prefixes there as well.
We need to adjust both CMAKE_FIND_ROOT_PATH and CMAKE_PREFIX_PATH,
due the path re-rooting bug in CMake.
See https://gitlab.kitware.com/cmake/cmake/-/issues/21937 as well as
the existing comment in qt.toolchain.cmake marked with
REROOT_PATH_ISSUE_MARKER.
We also need to do a few more things to make the setup work
Because Qt6Config uses NO_DEFAULT_PATH, the CMAKE_PREFIX_PATH
adjustments we do in the toolchain file are not enough, so we still need
to add the same prefixes to the Qt6Config find_package PATHS option.
One would ask why do we need to adjust CMAKE_PREFIX_PATH at all then.
It's for find_package(Qt6Foo) calls to work which don't go through
the Qt6Config umbrella package.
To make the CMake re-rooting behavior happy, we need to ensure the
provided paths are absolute.
So we iterate over the values of QT_ADDITIONAL_PACKAGES_PREFIX_PATH,
to make them absolute. We do the same for the environment variable.
We need to append lib/cmake to the prefixes which are added to
CMAKE_PREFIX_PATH, otherwise the CMake re-rooting bug is hit.
We need to specify the Qt6 package location (${_qt_cmake_dir}) to the
PATHS option in the various Dependencies.cmake.in files, to ensure
that dependency resolution can jump around between the Qt6 dir and
the additional prefixes. Previously the dependency lookup code assumed
that all dependencies would be within the same prefix.
The same is needed for qt and qml plugin dependency lookup.
Amends 7bb91398f2
Amends 60c87c6801
Amends 5bbd700124
Pick-to: 6.2
Fixes: QTBUG-95854
Change-Id: I35ae82330fec427d0d38fc9a0542ffafff52556a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is just a minor optimization.
Pick-to: 6.2
Change-Id: Icf0fc615895e1def63c57a72694c89f7ae7ee5cf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This patch is inspired by CodeChecker, that is complaining about
possible nullptr dereferencing.
Currently it is a false-positive, because the codepath suggested by
CodeChecker is impossible with current implementation.
But having asserts can save some time in case of possible refactoring.
Task-number: QTBUG-95727
Pick-to: 6.2
Change-Id: I242a23e8aaa249cce16b867c0884dfc3849977f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Don't go via QString when we don't need to.
Put expected after actual, not the other way round.
Give tests and test-cases sensible names.
Prefer function-style cast over C-style.
Change-Id: I0b79534a9cc95f2e312a85394693ac674ff3d1d6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using NoFontMerging, no fallbacks should be resolved. If the
font does not support a specific character in the text, we should
display a box instead of merging it with another font.
But in practice, Qt would still apply the fallback mechanism for
one specific case: If the font itself does not support the script
of the text, we would get no match and do a search for a fallback
instead. Since NoFontMerging is set, we would then force this
as preresolved for *all* scripts in the QFont's private data
(logically, the match should only have a single response for
NoFontMerging).
The end result was that if you set the font family before updating
the text, you would get broken rendering. This can happen e.g. in
Qt Quick, where you could update the font family of a text label
while it contains characters which are not supported by the new
font. Qt would then pick a fallback instead. When you subsequently
update the text, the fallback would already be preresolved for
whatever script this is. If it does not support the updated text,
we would then see boxes, even if the requested font actually would
have supported it.
The fix is simply to do an additional pass if NoFontMerging is set
and we were not able to match with the specified script. Since
the same family might be available in different foundries, with
different writing system support, we still want to do a pass first
to see if we can match the exact script of the text.
Note that QRawFont::fromFont() exploited the bug by using
NoFontMerging for getting the fallback font for a specific
writing system. To keep this working without having to rewrite
fromFont() and risk introducing regressions, we add an argument
to make the findFont() function behave as before. It isn't
super-pretty, but since it is private API it is hopefully fine.
[ChangeLog][QtGui][Text] Fixed an issue with NoFontMerging and
changing font families dynamically, where boxes would be seen in
place of the correct text.
Pick-to: 5.15 6.1 6.2
Done-with: Andy Shaw
Fixes: QTBUG-81770
Change-Id: Ide9a36d7528a1040172c5864fa99e7a82eac4e83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
_<module>_MODULE_DEPENDENCIES variable in the
<module>Dependnecies.cmake should only contain the list of targets that
module depends on, but not versions. Version of the first module
appears in the list because of the regression introduced in
425ff34aa1
Amends 425ff34aa1
Pick-to: 6.2
Change-Id: Iaa42120af6bac742bdf0f8d389bd8e5bdef9c1d1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Installing extracted metatypes json files for user projects was an
oversight. We shouldn't install anything on behalf of user projects,
but rather give them enough information so they can do it the
themselves.
Make all the install options of qt6_extract_metatypes internal,
change the behavior not to install the files by default, unless
__QT_INTERNAL_INSTALL is passed, which is used for the Qt build only.
__QT_INTERNAL_NO_INSTALL is now a no-op and should be removed from
projects.
This is behavior change for existing public API, but it's better to
fix this now before 6.2.0 release.
Introduce a new OUTPUT_FILES option to allow assigning the extracted
metatype file paths into a variable that the project provides.
The project can then install the files where they need them.
[ChangeLog][CMake] qt6_extract_metatypes does not install metatypes
files anymore. Instead the OUTPUT_FILES option can be provided to get
the list of extracted files for further processing.
Pick-to: 6.2
Task-number: QTBUG-95845
Change-Id: If5dd0255a5fea2b598e15118c29ec2ab2ba4324e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
There's no need of duplicating code all over the place; QString can
reuse the implementation of the indexOf/contains/count/lastIndexOf
family of functions already existing for QStringView.
For simplicity, the warning messages (that our autotests actually check)
have been made more generic, rather than introducing some other
parameter (as in, "which class is using this functionality so to emit
a more precise warning"), which would have just complicated things as
the implementation of these functions is exported and used by inline
QStringView member functions.
Change-Id: I85cd94a31c82b00d61341b3058b954749a2d6c6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
An empty QString(View) is allowed to have nullptr as its data pointer
(of course, only if its size is 0). This wasn't properly
checked in QRegularExpression, which passed such nullptr to
PCRE, and that resulted in PCRE raising an error (PCRE_ERROR_NULL).
Detect this case and pass a dummy pointer to keep PCRE happy.
Fixing and testing this in turn exposed a problem with QStringView
support in QRegularExpression when used over a null QString: the
code is supposed to use the QStringView(QString) constructor and NOT
qToStringViewIgnoringNull. That's because QRE distinguishes null
and empty subjects; when using qToStringViewIgnoringNull over
a null QString, one gets a non-null QStringView (!). Again, this in
turn exposed a problem with a QRegularExpression autotest that assumed
that a null match could only mean "no match" (instead, it can happen at
position 0 of a null QString(View)).
Change-Id: Ifb3cf14dec42ce76fcdbcb07ea1d80784d52ef65
Pick-to: 6.1 6.2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Size 0 is a "valid" answer for QIODevice implementations so we need to
make sure that we only enter the "try to workaround broken files" if we
know there is a size, otherwise the first read of length 4 that libpng
does breaks everything.
Change-Id: I1e396abd206ff90edae4372726f1d82d5d41ccf3
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When trying to fix 0-length matches at the end of a QString,
be83ff65c4 actually introduced a
regression due to how lastIndexOf interprets its `from` parameter.
The "established" (=legacy) interpretation of a negative `from` is that
it is supposed to indicate that we want the last match at offset `from +
size()`. With the default from of -1, that means we want a match
starting at most at position `size() - 1` inclusive, i.e. *at* the last
position in the string. The aforementioned commit changed that, by
allowing a match at position `size()` instead, and this behavioral
change broke code.
The problem the commit tried to fix was that empty matches *are* allowed
to happen at position size(): the last match of regexp // inside the
string "test" is indeed at position 4 (the regexp matches 5 times).
Changing the meaning of negative from to include that last position (in
general: to include position `from+size()+1` as the last valid matching
position, in case of a negative `from`) has unfortunately broken client
code. Therefore, we need to revert it. This patch does that, adapting
the tests as necessary (drive-by: a broken #undef is removed).
Reverting the patch however is not sufficient. What we are facing here
is an historical API mistake that forces the default `from` (-1) to
*skip* the truly last possible match; the mistake is that thre is simply
no way to pass a negative `from` and obtain that match. This means that
the revert will now cause code like this:
str.lastIndexOf(QRE("")); // `from` defaulted to -1
NOT to return str.size(), which is counter-intuitive and wrong. Other
APIs expose this inconsistency: for instance, using
QRegularExpressionIterator would actually yield a last match at position
str.size(). Similarly, using QString::count would return `str.size()+1`.
Note that, in general, it's still possible for clients to call
str.lastIndexOf(~~~, str.size())
to get the "truly last" match.
This patch also tries to fix this case ("have our cake and eat it").
First and foremost, a couple of bugs in QByteArray and QString code are
fixed (when dealing with 0-length needles).
Second, a lastIndexOf overload is added. One overload is the "legacy"
one, that will honor the pre-existing semantics of negative `from`. The
new overload does NOT take a `from` parameter at all, and will actually
match from the truly end (by simply calling `lastIndexOf(~~~, size())`
internally).
These overloads are offered for all the existing lastIndexOf()
overloads, not only the ones taking QRE.
This means that code simply using `lastIndexOf` without any `from`
parameter get the "correct" behavior for 0-length matches, and code that
specifies one gets the legacy behavior. Matches of length > 0 are not
affected anyways, as they can't match at position size().
[ChangeLog][Important Behavior Changes] A regression in the behavior of
the lastIndexOf() function on text-related containers and views
(QString, QStringView, QByteArray, QByteArrayView, QLatin1String) has
been fixed, and the behavior made consistent and more in line with
user expectations. When lastIndexOf() is invoked with a negative `from`
position, the last match has now to start at the last character in the
container/view (before, it was at the position *past* the last
character). This makes a difference when using lastIndexOf() with a
needle that has 0 length (for instance an empty string, a regular
expression that can match 0 characters, and so on); any other case is
unaffected. To retrieve the "truly last" match, one can pass a
positive `from` offset to lastIndexOf() (basically, pass `size()` as the
`from` parameter). To make calls such as `text.lastIndexOf(~~~);`, that
do not pass any `from` parameter, behave properly, a new lastIndexOf()
overload has been added to all the text containers/views. This overload
does not take a `from` parameter at all, and will search starting from
one character past the end of the text, therefore returning a correct
result when used with needles that may yield 0-length matches. Client
code may need to be recompiled in order to use this new overload.
Conversely, client code that needs to skip the "truly last" match now
needs to pass -1 as the `from` parameter instead of relying on the
default.
Change-Id: I5e92bdcf1a57c2c3cca97b6adccf0883d00a92e5
Fixes: QTBUG-94215
Pick-to: 6.2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is a no-op. But take the opportunity to make a drive-by update on
the loop, which improves it.
Change-Id: I4a40ccbd3321467a8429fffd169b08590d28c928
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
We already do it for inputs but weren't doing it for outputs.
Change-Id: I4a40ccbd3321467a8429fffd169afeb5730ad75e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Wrap the overloaded methods in qOverload(), to make the examples
compile.
Also remove the extra whitespaces when declaring nested templates.
Pick-to: 6.1 6.2
Change-Id: If438caa6d705d9036dae45278fb26e080918da89
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The code isn't easily linearized to work directly with
QStringTokenizer, which is a forward-only range, but we can at least
remove the (non-error) memory allocations by supplying a
suitably-sized QVLA to tokenize into instead of the default QList.
Change-Id: I1aa11a5fbbe66ede4ec2e5b2090044a39052a241
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
By dropping the clause pointlessly guarding the ranged for loop against
an empty collection, we can reduce the ping-pong being played with the
*ok boolean: Just set it to false at the beginning, and only set it to
true when we reach the success-return.
Pick-to: 6.2
Change-Id: I87365146086aba427b7414e83f077096824ff56f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The variable `i` is initially `suffixPos + 1` and is then incremented
further. It therefore can never be equal to `suffixPos` (ints don't
overflow, that would be UB, and suffixPos doesn't change its value),
so don't check for that.
Change-Id: I3870ddf6ee550cad6c24fececf2a0b662a33d750
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The wasm support files need to be both copied and installed in a
top-level prefix build, to ensure that leaf repos can find them in the
build dir when they are configured.
Pick-to: 6.2
Fixes: QTBUG-95806
Change-Id: I8c09f04fec51cf850299d535bdf3f26542ec4aac
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Like we do for OpenGL. Conveniently enough the QRhi feature flags are
readily available.
This should prevent errors such as:
MTLValidateFeatureSupport:3901: failed assertion `Base Vertex Instance
Drawing is not supported on this device'
on the iOS Simulator. It is not clear since which version or SDK this
became a fatal problem, but the base vertex/instance support is indeed
an optional feature according to the Metal Feature set tables, so not
calling the drawIndexedPrimitives variant taking baseVertex and
baseInstance when the reported iOS GPU family is too low is the right
thing to do regardless.
Pick-to: 6.2 6.1
Fixes: QTBUG-95795
Change-Id: I47c54a77a66a0410b86b8d4e5a1863dc730490f4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This will show packages that were found (or not) with
find_package(QUIET) in summary just before the configure summary.
It's useful for CI logs to determine whether some Qt packages was not
found when cross-compiling.
Pick-to: 6.2
Change-Id: Ic7d5062cf061f7c60b5c74374f957065dd8029f5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
All the tests were using the C locale, so were equivalent to tests of
QTime::toString(). Add a locale column and some test-cases in
preparation for a change to am/pm indicators.
Task-number: QTBUG-95790
Change-Id: I3ad917b7a6f3d3bfe31d6a5a5da596025f173e81
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some internal links to `QSet` methods were missing from the
documentation. In particular, all methods that were written with one
attribute.
It seems that QDoc might automatically recognize method/function
links only if they have zero parameters, such that the identifier is
followed by `()` directly.
To avoid this problem while keeping the current parameter-containing
form of the text; each function of the form `functioname(\a
parametername)` was changed to `\l {functionname()} {functioname(\a
parametername)}.
Furthermore, one of those text instances was modified to use `\a` for
the parameter name, instead of the previously used `\e`, to enhance
consistency.
An instance of `operator<<()` was not recognized as a link.
To resolve this it was marked with the `\l` command.
Fixes: QTBUG-95389
Pick-to: 6.2 6.1
Change-Id: I16b2a7a2fbaf4785c2c6bfa5017a3db46d9db2f4
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
ImAbsolutePosition was added in f8dbed1226,
based on requirements on Android, but without an implementation for
QLineEdit. It would seem sensible to fall back to the cursor position
in this case, as QLineEdit doesn't support multiple blocks.
Pick-to: 6.2
Change-Id: Iff1255270ceef069f03ce457df633d7b675f1a28
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends 359616066e, which incorrectly
changed
- tabList[i].minRect = QRect(0, miny, sz.width(), sz.height());
+ tab->data = QRect(0, miny, sz.width(), sz.height());
in the code laying out verticals tabs (correct done for the horizontal
case).
Since QDockWidget uses the user data for tabs to maintain the mapping
between tabs and dock widget, this broke the layout logic.
Fixes: QTBUG-95841
Pick-to: 6.2 6.1
Change-Id: Ie785e1205b426bbc4954b965f619f4c603490f76
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Let find_package(Qt6 COMPONENTS LinguistTools) for a cross-compiled
Qt fall back to search LinguistTools in the host Qt.
Use the same trick as in QtModuleDependencies.cmake: Prepend both
CMAKE_PREFIX_PATH and CMAKE_FIND_ROOT_PATH with the QT_HOST_PATH
(respective ${QT_HOST_PATH}/lib/cmake).
Furthermore adding ${QT_HOST_PATH}/lib/cmake to PATHS argument
makes sure that find_package will work even with NO_DEFAULT_PATH.
Make sure not to match ShaderTools and Tools packages.
ShaderTools is the cross-compiled package, the host package name is
ShaderToolsTools.
Tools is the cross-compiled module from qttools.
Allow an opt out via a QT_NO_FIND_HOST_TOOLS_PATH_MANIPULATION
variable in case that we accidentally match more packages ending in
Tools that are actually cross-compiled packages.
Pick-to: 6.1 6.2
Fixes: QTBUG-95602
Change-Id: Ib0a787716fa529e36f22356da069e705d9eed5fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
