Saves us from having to create a lambda functor object.
Change-Id: I5e790e693b57ae414ac6d6be84f18b76b3e8185c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Mostly applying clang-format and clang-tidy fixits for:
- Redundant code (e.g. bool == true/false)
- Use member initializer list
- std::move for parameters taken by copy
Change-Id: I3b9a7f01db67291f889b42346a95c55ad74f054c
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Slightly improves performance in the new benchmark
Change-Id: I2d71143ff7bc1f32ebb172f20be1843dec123e6c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When the Command key is pressed AppKit seems to do key equivalent
matching using a Latin/Roman interpretation of the current keyboard
layout.
For example, for a Greek layout, pressing Option+Command+C produces a
key event with chars="ç" and unmodchars="ψ", but AppKit still treats
this as a match for a key equivalent of Option+Command+C.
We can't do the same by just applying the modifiers to our key map,
as that too contains "ψ" for the Option+Command combination. What we
can do instead is take advantage of the fact that the Command modifier
layer in all/most keyboard layouts contains a Latin layer. We then
combine that with the modifiers of the event to produce the resulting
"Latin" key combination.
If the unmodified key is outside of Latin1, we also treat that as a
valid key combination, even if AppKit natively does not. For example,
for a Greek layout, we still want to support Option+Command+ψ as a key
combination, as it's unlikely to clash with the Latin key combination
we added above.
However, if the unmodified key is within Latin1, we skip it, to avoid
these types of conflicts. For example, in the same Greek layout, pressing
the key next to Tab will produce a Latin ';' symbol, but we've already
treated that as 'q', thanks to the Command modifier, so we skip the
potential Command+; key combination. This is also in line with what
AppKit natively does.
Fixes: QTBUG-96371
Fixes: QTBUG-79493
Task-number: QTBUG-112736
Change-Id: I30d678c1c7860642d3eed29c7757133ff74c6521
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
An incoming key event with a set of modifiers can potentially match
a range of key combinations, depending on how the event's modifiers
are combined to produce "intermediate" representations of the event.
For example, given a normal US keyboard layout, the virtual key
23 combined with the Alt (⌥) and Shift (⇧) modifiers, can map
to the following key combinations:
- Alt+Shift+5 (Fully expressed combination)
- Alt+% (Shift consumed to produce %)
- Shift+∞ (Alt consumed to produce ∞)
- fi (Shift and Alt consumed to produce fi)
But in other cases the intermediate modifier combinations
produce the same key/symbol as other modifier combinations.
For example, pressing Alt (⌥) and Shift (⇧) with the 'c'
key on a US layout will produce:
- Alt+Shift+C (Fully expressed combination)
- Shift+Ç (Alt consumed to produce Ç)
- Ç (Shift and Alt consumed to produce Ç)
In this case, we don't want to reflect the standalone 'Ç',
as that has already been reflected in the more direct form
via Shift+Ç. Consuming the additional Shift modifier does
not produce any additional symbols.
The same can happen without the number of modifiers being
different, in case two modifiers produce the same symbol.
In this case we want to prioritize Command over Option
over Control over Shift.
There is similar logic in the Windows and XKB key mappers,
and the implementation in the Apple key mapper has been
adapted from the Windows key mapper.
Task-number: QTBUG-67200
Task-number: QTBUG-38137
Change-Id: I4f1aeebac78a5393f8da804b53cf588f7c802c1b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We look for all Qt components when attempt configuring standalone
tests. If some 3rdparty dependencies are missing in user environtment
the configuring proccess will fail even if the dependency is not used
by the standalone tests. Avoid requiring the Qt components, so users
will see only warnings about the missing comonents or dependencies.
Fixes: QTBUG-117709
Pick-to: 6.6 6.5
Change-Id: Iecce40449cdf116f1a7c279ebb161f0f5c7f6a9f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If the native method contains a jfloat parameter, I get
the warning/error:
Second argument to 'va_arg' is of promotable type 'JNITypeForArg<float>'
(aka 'float'); this va_arg has undefined behavior because arguments will
be promoted to 'double'
Change-Id: I8e8ee256b9bea01585b5f70554ba2fc537e2c94d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amend 1aba24a2ed and add check for the
EGL_DRM_MASTER_FD_EXT now used as older egl headers might not have it.
Pick-to: 6.6 6.5
Change-Id: I98b860d05396c24b8eb0e73172ac395c89da8628
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Alex Bu <alex.bu@qt.io>
It's explicitly undefined behavior to pass release/acq_rel
memory_order to load(), so don't.
This is private API, so no ChangeLog needed.
Reported-by: Fabian Kosmale <fabian.kosmale@qt.io>
Task-number: QTBUG-115107
Pick-to: 6.6 6.5
Change-Id: Iee119303d790c31937238ef92d900a25020e9713
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
... by making it thread_local.
It is written and read by multiple threads at the same time, so it needs
to be protected. Since signal emission start and end happens in a single
thread, keep it thread_local rather than using an atomic.
Pick-to: 6.6 6.5
Change-Id: I98fc5438c512b45f936318be31a6fccbe5b66944
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
... by making it thread_local.
As a natural (and welcome) side-effect, this makes output look sane in
multithreaded scenarios.
As for why it should be thread_local instead of an atomic:
Since signal emissions and slot invocations on one thread are not
necessarily correlated with another thread, they should not affect
one another's indentation level. As in, emitting QIODevice::readyRead
on a background thread should not make QEventLoop::aboutToBlock on the
main thread be indented. The only exception to this is BlockingQueued,
where one thread is directly tied to another (QTBUG-118145). But slot
invocations are anyway not currently printed for Queued connection
(see QTBUG-74099.)
Pick-to: 6.6 6.5
Change-Id: Iea1fc522d37626df14af419a3455a732729edf74
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
'.' in the regexp must be escaped.
e.g. "/qt/toolchain.cmake" matches "/qt.toolchain.cmake$"
Pick-to: 6.5 6.6
Change-Id: Ib6b66349e1619908a33b4a11d79f7ba19d0e8fdc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It deoesn't like single quotes, which must be replaced with doubled-up
double quotes.
Pick-to: 6.2 6.5 6.6
Change-Id: I8e5f8047e72e4433926a9f4f2044407a4d823682
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Although used mostly in the same files, they're separate types, so
define them in separate places.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I9e64b382ad48f9a74e432ccd49b6f5fcc9316da3
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QT_NO_OPENGL is defined in qtgui-config.h so we should include it before
checking the definition.
Fixes: QTBUG-115446
Pick-to: 6.5 6.6
Change-Id: I29b9d7d89fe4c079ca0cf767a1b1a63cc5621623
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We were using the .remove(Key) API on the map instead of
erase(iterator), so we were removing any reply of the same priority that
had not yet been popped from the queues.
Rewrote to drop loop and only work with iterators.
This issue was there since SPDY days, so not picking all the way back to
5.15, where HTTP2 anyway is not enabled by default.
As a drive-by, drop the #ifndef QT_NO_SSL, which was also there from
SPDY times, which was TLS-only.
Pick-to: 6.6 6.5 6.2
Fixes: QTBUG-116167
Change-Id: Id7e1eb311e009b86054c1fe3d049c760d711a18a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Although used mostly in the same files, they're separate types, so
define them in separate places.
Pick-to: 6.6 6.5
Task-number: QTBUG-111228
Change-Id: I9e64b382ad48f9a74e432ccd49b6f5fcc9316da3
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Implements an iterator API and other standard member access functions
for sequential containers so that we can use ranged-for over an object
that is a jarray. Provides read-only access to individual elements
(which is mostly relevant for arrays of objects), or the entire data()
as a contiguous memory block (which is useful for arrays of primitive
types).
QJniObject call functions can return QJniArray<T> when the return type
is either explicitly QJniArray<T> or T[], or their Qt equivalent (e.g.
a jbyteArray can be taken or returned as a QByteArray). If the return
type is a jarray type, then a QJniObject is returned as before.
Arrays can be created from a Qt container through a constructor or the
generic fromData named constructor in the QJniArrayBase class, which
implements the generic logic.
Not documented as public API yet.
Added a compile-time test to verify that types are mapped correctly.
The function test coverage is added to the QJniObject auto-test, as
that already provides the Java test class with functions taking and
returning arrays of different types.
Change-Id: I0750fc4f4cce7314df3b10e122eafbcfd68297b6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
And some of them are not needed at all.
Pick-to: 6.6
Change-Id: Ia4778c7016573eff3eefc2f6838e458008161da6
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Make the QT_D3D_NO_FLIP env.var. have an effect again.
This env.var. has the following effects:
- SwapEffect is set to DXGI_SWAP_EFFECT_DISCARD
- Scaling is set to DXGI_SCALING_STRETCH (no other option with the
blitting legacy model)
- Alpha works without having to deal with DirectComposition, the dcomp
code path is therefore skipped completely in legacy mode
- Requesting a HDR mode behaves incorrectly (there's an unwanted
conversion to SDR or something like that)
- Different window resizing artifacts. Instead of the big black/white
bars, that is typical with the modern, efficient flip swapchains in
non-Qt applications as well, there is a bit of shimmering on the
right side esp. when resizing on the left side. The option of using
the legacy is model provided mainly for users where this is
important.
- Reduced performance due the using the old blitting model, although
that probably won't be visible for many typical Qt applications on
desktop PCs.
Only for D3D11, because D3D12 does not support non-flip swapchains.
Note: this is incompatible with QT_QPA_DISABLE_REDIRECTION_SURFACE.
The reason to reintroduce this option is to provide a way, even if
just as a developer-focused environment variable, to get a behavior
that is identical to other frameworks and non-Qt applications that
still use D3D11 with the legacy swapchain modes in their rendering
engines. This applies first and foremost to window resizing, where
the visual artifacts common with flip model swapchains may be
misunderstood to be caused by Qt. Having a way to opt-in to the
legacy model allows avoiding/clarifying Apples-to-Oranges
comparisons.
Pick-to: 6.6 6.5
Change-Id: I04e46f71a96fa56cace38703e0e9b93b43bfebc7
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
Previously we had some inline c-string literals. But since the parameter
for those is const-ref QString it has to actually allocate the storage
and convert the string to UTF-16.
By putting it as a function that returns a QString constructed
with u""_s, we instead create a cheap non-owning QString that just
refers to the string somewhere in memory.
As a drive-by: move other string-literals into functions as well.
Change-Id: I2f2ca5b979cfa772665fa83689837f991b0c656d
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Configure time executables don't adopt new cmake flags if they were
changed. Cache all flags that were used when building configure time
executables and consider changes when decide rebuilding them.
Pick-to: 6.6 6.5
Change-Id: Ifba77833f362c790120f0ab1f808a855327bc49f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
There's nothing wrong with device labels starting with a dot. Whether
udev would encode those as \x2e is unknown, but we may as well not tempt
fate in case it has changed or changes in the future.
Also including QDir::System in case udev places the actual device nodes
in /dev/disks/by-label instead of a symlink.
As a nice and intentional side-effect, QDirIterator no longer performs a
stat() in each of the entries, removing the double stat'ing that started
happening with the previous commit.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd1787681b4cf2bb58
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In addition to what parseMountInfo() filtered, we also filter entries
with zero total bytes (other than the root filesystem). This avoids
creating yet another QStorageInfoPrivate that may not be used, but most
importantly it avoids calling root() for that check, which would call
parseMountInfo() again.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd1787538dd3f285d0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Mine has 41 lines, of which 22 are returned by parseMountInfo with
filtering. That meant the file was parsed once to get the listing, then
22 times more to create a QStorageInfo for each entry. Now
QStorageInfo::mountedVolumes() opens the file and parses it only once.
Pick-to: 6.6
Change-Id: I9d43e5b91eb142d6945cfffd178752ef6c2122f2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Ensure that this environment variable is respected, as ASAN errors
(e.g. memory leaks) can cause the selftests to fail since they expect
no errors in their output.
Fix an incorrect function name in a comment, while we're at it.
Fixes: QTBUG-118041
Pick-to: 6.5 6.6
Change-Id: I07502101aabd8743df898ae8fe4a693c4733c4af
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
These must pass, but they're highly unlikely to be trashable because
/var/tmp is usually not its own filesystem (it might be a subvolume of
its own, but usually isn't). Instead, it's usually part of / or /var.
On my machine:
openat(AT_FDCWD, "/var/.Trash", O_RDONLY|O_NOFOLLOW|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/var/.Trash-1000", O_RDONLY|O_NOFOLLOW|O_CLOEXEC|O_DIRECTORY) = -1 ENOENT (No such file or directory)
mkdirat(AT_FDCWD, "/var/.Trash-1000", 0700) = -1 EACCES (Permission denied)
Change-Id: Ifeb6206a9fa04424964bfffd17884246a4d27443
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Both QTemporaryFile and QTemporaryDir are documented to use the current
directory if given a pattern. That can be anything & arbitrary, so it
doesn't give us consistency in checking. Moreover, it might be a read-
only directory.
Drive-by fix the number of 'X'.
Task-number: QTBUG-117449
Pick-to: 6.6
Change-Id: Ifeb6206a9fa04424964bfffd178841c44e9636a0
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
QtTest can't handle a test that does both. This ends up recorded as a
skip in the summary.
Pick-to: 6.6
Change-Id: Ifeb6206a9fa04424964bfffd1788412a438085b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Nothing here is empty and even if anything were, QStringBuilder properly
handles empty strings.
In static member function ‘static void QConcatenable<QByteArrayView>::appendTo(QByteArrayView, char*&)’,
inlined from ‘static void QConcatenable<QStringBuilder< <template-parameter-1-1>, <template-parameter-1-2> > >::appendTo(const type&, T*&) [with T = char; A = QByteArrayView; B = const char (&)[20]]’ at qstringbuilder.h:398:37,
inlined from ‘T QStringBuilder< <template-parameter-1-1>, <template-parameter-1-2> >::convertTo() const [with T = QByteArray; A = QByteArrayView; B = const char (&)[20]]’ at qstringbuilder.h:117:54,
...
qstringbuilder.h:178:19: error: ‘void* memcpy(void*, const void*, size_t)’ forming offset [1, 5] is out of the bounds [0, 1] of object ‘QByteArray::_empty’ with type ‘const char’ [-Werror=array-bounds=]
QStringBuilder::convertTo() creates the target as
const qsizetype len = QConcatenable< QStringBuilder<A, B> >::size(*this);
T s(len, Qt::Uninitialized);
We know len can't be zero because GCC is complaining about a memcpy()
when the offset has been changed from 0, meaning QByteArray was given a
non-zero size and therefore its data pointer is not &QByteArray::_empty.
Fixes: QTBUG-116763
Pick-to: 6.5 6.6
Change-Id: I85599ea5ca7a4b79a8bbfffd178af437984080fb
Reviewed-by: Shawn Rutledge (away) <shawn.rutledge@qt.io>
Use the pre-existing MSVC code path, which uses UCRT.
warning: 'tzname' is deprecated: Only provided for source compatibility; this variable might not always be accurate when linking to UCRT. [-Wdeprecated-declarations]
Pick-to: 6.6
Change-Id: I8f3ce163ccc5408cac39fffd178dc618f1a8f034
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
The current example shows a minimal implementation. However, neither
this example nor the documentation explains what happens without the
guard. Although it's not mandatory, the large majority of the time
it's a good practice to have it. This patch improves this part.
Change-Id: I411a9d66bd7d8ba16aac87e28b5cab219fd71a5d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This base class implementation for COM objects provides IUnknown
interface implementation with reference counting which will allow to
keep all this functionality and implementation in the same place.
Pick-to 6.6 6.5
Change-Id: I8ec597b1040ac33295317e06338ffdcb61b78f85
Reviewed-by: Jøger Hansegård <joger.hansegard@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Mention that QtMessageHandler needs to be reentrant,
as well as other caveats. Mention QLoggingCategory,
so people do know that they don't have to necessarily
implement their own handler to filter messages (and that
not all messages reach the handler). Also mention
qFormatLogMessage().
Finally, give a more useful example for a custom
message handler that logs to a file. Note that the example
leaks a file handle at exit, but that is arguably not that
bad.
Pick-to: 6.5 6.6
Change-Id: I5be44167b266c9bbdbb0e94806bb024c9b352a32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since https://gitlab.kitware.com/cmake/cmake/-/merge_requests/8840 is
merged, the timestamp file for {target}_json_file.txt should be updated
for `multi-config` builds too.
A possible error message before this commit when `qt6_extract_metatypes()` is called with a newer
or equal version than `3.28` `CMake` and `Ninja Multi-Config`.
```
ninja: error: 'src/corelib/Core_autogen/timestamp', needed by 'src/corelib/meta_types/Core_json_file_list.txt', missing and no known rule to make it
```
Amends 8042bfba47305352627d910930e52da496904c17
Pick-to: 6.2 6.5 6.6
Change-Id: Ib404bd058d5f4c75501fb714c2ad9608d6852822
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Makes it easier to get an idea of what went wrong
Change-Id: Idace20ecf008fa906780881b62ed44ac36751123
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Queued signals from main thread were not handled if enqueued on
a different thread. This is because qt_jspi_can_resume_js was
called on a thread (worker), where the Module object does not have
the property used for determining whether JSPI is suspended.
Change-Id: Icbc4dbfcf46c1091eb71b23c7de50760c8a339ae
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Fix some issues for QProgressBar with fusion style:
- no progress text was shown in vertical mode
- the color change for the text was not correct in rtl mode
- the two rounded rects were not drawn correctly in some modes
Also simplify the code by also using a QTransform for rtl mode and not
only for the vertical mode.
Fixes: QTBUG-117904
Change-Id: I1dd89daf34e8808417750f2ca714252afdab1416
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
On some configs (e.g. using Snap) the NetworkManager service is not
available without some manifest or similar. In this case, the
_interface_ we have is still valid but we can't connect to the
service. So we need to mark the interface as invalid in this case, so
that we can avoid trying to use this plugin.
Pick-to: 6.6 6.5
Fixes: QTBUG-117490
Change-Id: I3c5ebb492f9ca4dfdf4353d77705ba993279eb69
Reviewed-by: Ilya Fedin <fedin-ilja2010@ya.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The previous attempt to record a dependency on the
IntegrityPlatformGraphics target for the Gui target was insufficient.
Aside from a qt_find_package(PROVIDED_TARGETS) call, we also need to
use qt_internal_extend_target(Gui PRIVATE IntegrityPlatformGraphics)
to ensure the dependency is written into the Qt6GuiDependencies.cmake
file.
Replace the target_link_libraries call with qt_internal_extend_target,
and remove the qt_find_package all together. A qt_find_package call
in src/gui/configure.cmake already exists, so the one in
CMakeLists.txt is redundant and can be removed.
Finally the
qt_internal_extend_target(Gui PRIVATE IntegrityPlatformGraphics)
call will also result in a
target_link_libraries(Gui INTERFACE
$<LINK_ONLY:IntegrityPlatformGraphics::IntegrityPlatformGraphics>)
because Gui is a static library when building on Integrity, so the
transitive requirement will still be passed along to user projects.
Amends c03eb94c8a
Amends 8116fdde1c
Pick-to: 6.6
Fixes: QTBUG-118051
Task-number: QTBUG-102883
Change-Id: Ic962df94a20071d3f2459e705dbafaca0319a638
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
