Tidied up the existing float tests in the process.
(In particular, s/SUCCESS/PASS/ since that matches real test output.)
These verify that QCOMPARE() handles floats and doubles as intended.
Extended the existing qFuzzyCompare tests to probe the boundaries of
the ranges of values of both types, in the process.
Revised the toString<double> that qCompare() uses to give enough
precision to actually show some of the differences being tested there
(12 digits, to match what qFuzzyCompare tests, so as to show different
values rather than, e.g. 1e12 for both expected and actual) and to
give consistent results for infinities and NaN (MinGW had eccentric
versions for these, leading to different output from tests, which thus
failed); did the latter also for toString<float> and fixed stray zeros
in MinGW's exponents (which made a kludge in tst_selftest.cpp
redundant, so I removed that, too).
That's further complicated handling of floating-point types, so let's
just keep an eye on how expensive that's getting by adding a benchmark
test for QTest::toString(). Unfortunately, default settings only get
runs that take modest numbers of milliseconds (some as low as 40)
while increasing this with -minumumvalue 100 or more gets the process
killed - and I'm unable to find out who's doing the killing (it's not
QProcess::kill, ::kill or the QtTest WatchDog, as far as I can tell).
So results are rather noisy; the integral tests exhibit speed-ups by
factors up to 5, and slow-downs by factors up to 100, between runs
with and without this change, which does not affec the integral tests.
The relatively modest slow-downs and speed-ups in the floating point
tests thus seem likely to be happenstance rather than signal.
Change-Id: I4a6bbbab6a43bf14a4089e96238a7c8da2c3127e
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Search the previous item or the next item in a model instead
of searching them on visual layout. This way the cursor will
not stop at the beginning or at the end of a row or a column.
Fixes: QTBUG-14444
Change-Id: I0ef203a4dcd876e4c50559fb87e61585f07434d1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
It is the flaky test causing most failures in qtbase at the moment.
Task-number: QTBUG-73545
Change-Id: Id9c5db27ebd08a4cf3c119d2fada12fdf1a5d2a0
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
We translate all pure gray colors into cmyk having c,m,y=0 and only
the k value expressing the darkness. But a fix introduced to avoid
division by 0 caused rgb(0, 0, 0) to be an exception to this; it ended
up being translated as c,m,y,k=1 instead.
Fix by catching the potential div-by-0 situation earlier and directly
set the orthodox cmyk translation: c,m,y=0,k=1.
Fixes: QTBUG-73171
Change-Id: I3774eaf9d96e096ac5c47c55d28881bea2bd1309
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
For some overly tight beziers where the start or end point and the
next control point are closer than the pen width, the stroker's
shifting algorithm will produce a start/end tangent pointing in the
opposite direction from what is expected, for one of the sides. This
would break the square and round capping logic. Fix by detecting the
situation in the capping function and reversing the tangent when
necessary.
Change-Id: I48f4f017403d7b289b0483dd2b3a7ff1bbd0cf2a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Only for tests that have existing expected_*.* files for other
formats, though.
Change-Id: I34ca1900d88454f300e04d849a608c378009489b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Regexes have long specified that a [ as the first character inside a
[...] is just a literal [, but apparently we need to escape it now, to
avoid a "nested set" FutureWarning.
Change-Id: I76a48c9aafb0684a1d6b0d5284fe9852c9ea0e43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Prioritize blacklisting over QEXPECT_FAIL so that a test that is
blacklisted no longer fails if QEXPECT_FAIL returns true unexpectedly. To
reflect this state properly, the two values of BXPASS and BXFAIL were
added to testlib's output.
[ChangeLog][Important Behavior Changes][QtTestLib] Blacklisting of tests
will be taken into account for XPASS and XFAIL. A blacklisted test that
causes an XPASS will no longer be a fail.
Task-number: QTBUG-72928
Change-Id: Ia2232fdc714d405fa3fd9aea6c89eb2836bc5950
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test started to fail now also for latest Windows 10 Update
Restone 2. It's unclear why the test was succeeding before, since this
seems a generic Windows API issue.
Task-number: QTBUG-64985
Task-number: QTQAINFRA-2255
Change-Id: I804f6a61c63ea70157353d1aee9027d0735073ab
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QItemDelegate::comboBox() is flaky because sometimes the used
QTableWidget does not yet have the focus which prevents a correct
editing. Fix it by explictily setting the focus on the widget after it
is shown.
A similar fix was added for dateTimeEditor() in
9822d57d85.
With this patch the test no longer fails for my on opensuse, therefore
remove the blacklisting.
Task-number: QTBUG-67282
Change-Id: I907db662ca347f8e8d31e5be215a100377b159ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
For some reason behavior of SecureTransport has changed from 10.12 to 10.13
and then to 10.14. On 10.13 SecureTransport fails upon receiving the server's
certificate with 'Unrecoverable error', before we can do a manual verification
and accept the certificate as trusted. Analysis of available source code
shows that they, apparently, do not like MD5 hash which our server is using.
Until certificate is updated on the server or we switch completely to
the Docker-based solution we have to BLACKLIST tests that connect to our
current network test-server. Oddly enough, on 10.14 SecureTransport is
less mean.
Task-number: QTBUG-69873
Change-Id: I7da1883e0970a2f6ddd8385f193b76116d6983e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Set the inherited properties as resolved on the font, so non-default
values are passed on in contexts that does resolve logic like QPainter.
One test is updated as it actually tests what it is supposed to on
more configurations.
Fixes: QTBUG-39560
Change-Id: Ief668e992ccdc091337a259a4c1306a00e67c73f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add qWaitForWindowExposed() for the toplevel and use QTRY_VERIFY()
for finding the delegates consistently.
Change-Id: I430088a91b5cc1a8f856d0a58aba066b1baf179b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
(cherry picked from commit 9d2923c1b0)
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
The cursor test sometimes fails due to the fact that the topLevel widget
has not yet reached it's fullscreen geometry. This means the
QGraphicsView is to small and the test will fail.
Avoid it by simply removing the topLevel widget since it's not used at
all.
Change-Id: Ia7b34f283a917a35b6665e6333a01378575a5a04
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Various tests were setting the default locale and relying on cleanup()
to "restore" the C locale; which needn't actually be the locale we
started out in and, in any case, was the wrong locale for some tests.
So handle this via an RAII class that records the actual prior locale
and restores it on destruction.
Fixes: QTBUG-73116
Change-Id: If44f7cb8c6e0ce81be396ac1ea8bab7038a86729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run.
97b4c5a574 already accounts for it but
the current tag for creation date is '/CreationDate'. Therefore check
if the line contains 'CreationDate' instead.
Change-Id: I1fc069cf935bba07084ac4a0743ff05312374d10
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QString::localeAwareCompare() is failing since
ab448f731e because the 'C' locale no
longer initializes ICU and falls back to simple QString comparison.
Fix it by explicitly setting the locale for the testdata to en_US so the
QCollator is properly initialized.
Task-number: QTBUG-73116
Change-Id: I9d4d55e666c5c52f93298dedb7e22da01a25318d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output files for the tuplediagnostics selftest of testlib had a
stray non-canoical path fragment in them; so replaced with its
canonical form.
Change-Id: Ib421380036c3fb1b91447eb8c87be4ad0dfe5c96
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The bool is assigned on the previous line: QTRY_VERIFY will not do
anything because the statement is already true.
Change-Id: I067290e19ffd100819b2b631af431c6013623a00
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It was an implicit effect before which stopped working after
dec7961709. Reintroduce it as some
projects used this side-effect as a way to abort the initial
highlighting.
Change-Id: I5340ee9882a242bc8b5f7f843f1cfe793a65d357
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
tr() recognizes %n and %Ln. it offers no way to escape lone percent
signs, which implies that they must be interpreted verbatim, which is
what the code actually does. except that it would run off the end if the
% appeared at the end of the string.
Fixes: QTBUG-57171
Done-with: Mateusz Starzycki <mstarzycki@gmail.com>
Change-Id: Icf81925c482be1ea66ec8daafb3e92ad17ea7fab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Its filePath() and absoluteFilePath() don't trust its own
isAbsolute(), due to some infelicities on MS-Win; and kludged round a
consequent problem with resource paths; but other virtual file systems
weren't catered for. Replace the convoluted test there with a static
bool function (so that future kludges in this area shall only need to
edit one place; and can document why they're needed) and use a more
robust test that handles all virtual file systems (by asking
QFileInfo) but falls back to QFileSystemEntry to work round the known
infelicities on MS-Win. Add regression test for asset library paths
issue on iOS. Ammends 27f1f84c1c.
Moved a couple of local variables to after the early return, since it
doesn't need them, in the process.
Task-number: QTBUG-70237
Change-Id: Ib3954826df40ccf816beebe5c3751497e3bf6433
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
When using the overload of QCoreApplication::processEvents that takes a
maxtime argument, the function will keep processing events until there
are no more events, or until it times out.
The problem is that the function doesn't distinguish between events that
were on the event queue when the function was called, and events generated
by processing events as part of its own execution. If for example a widget
calls update() in its paintEvent, the function will spin for the entire
duration of maxtime.
That doesn't work for qWaitFor, where we need to check the predicate
between each pass, so we use the overload of processEvents that doesn't
take a maxtime. That's fine, as we have our own timeout logic.
Change-Id: I9738d7d0187c36d4a5ddfcd3fd075b0bd84583c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The refactoring of dnd with f8944a7f07
added a regression which results in a need to reimplement
dragMoveEvent() on the drop side. Before this change it was possible to
accept the dnd in dragEnterEvent() without again accepting it in
dragMoveEvent().
Fix it in a similar way it's done in
QGuiApplicationPrivate::processDrag() by prefilling the first simulated
QDragMoveEvent with the values from the previous QDragEnterEvent before
it is sent to the drop receiver.
Fixes: QTBUG-72844
Change-Id: I1300dd02b7f1d9dcd44ecefa8335f92ad6c6cafa
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
qtbase/src/corelib/kernel/qmetatype.cpp: In static member function ‘static void QMetaType::destroy(int, void*)’:
qtbase/src/corelib/kernel/qmetatype.cpp:2599:27: error: ‘info.QMetaType::m_destructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (m_typedDestructor && !m_destructor)
~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_destructor’ was declared here
QMetaType info(type);
^~~~
qtbase/src/corelib/kernel/qmetatype.cpp:2600:26: error: ‘info.QMetaType::m_typedDestructor’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_typedDestructor(m_typeId, data);
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
qtbase/src/corelib/kernel/qmetatype.cpp:1868:15: note: ‘info.QMetaType::m_typedDestructor’ was declared here
QMetaType info(type);
^~~~
The extended (not inlined) function may be called on a half
initialized invalid instance.
Change-Id: I26d677a8ad2bd0c5846233f06393e774d377936d
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a button added to QMessageBox has AcceptRole or YesRole, the signal
accepted() will be emitted upon click on the button. If the button has
RejectRole or NoRole, the signal rejected() will be emitted upon click
on the button. If a button has a different role, neither accepted() nor
rejected() will be emitted. This works for both standard and custom
buttons.
The signal finished() with result code will be sent regardless of a
clicked button role.
Also added documentation strings for some methods of private classes in
order to have better tooltips in IDE(s).
Task-number: QTBUG-44131
Change-Id: I521a4e5112eb4cf168f6fbb4c002dbe119aeeb09
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QStringListModel::setData documentation states that
"The dataChanged() signal is emitted if the item is changed."
This patch actually respects the doc. setData will check that the data
actually changed before sending the dataChanged signal.
[ChangeLog][QtCore][QStringListModel] setData will now emit the
dataChanged() signal only if the string set is different from
the one already contained in the model
Change-Id: I4308a6f3b4851203fb899c5e29a36076e0c32f2f
Reviewed-by: David Faure <david.faure@kdab.com>
The grayscale font-smoothing doesn't expect to be linearly blended,
as first assumed.
Amended nativetext manual test to better diagnose the native Core
Text behavior. Non-linear blending will result in the magenta
text having a dark outline against the green background.
Change-Id: I24a5f04eb1bd66fb98d621078d80ee9b80800827
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When eliding text we would check for the existence of the ellipsis
character and fall back to using the dot if it was not available.
However, when font merging was in use, we would also use ellipsis
from a fallback font if available. This could cause the metrics
of the text to increase if the fallback font had larger metrics,
and the result was that text could shift when elided.
It is better to prefer the dot from the current font than to use
the ellipsis from a fallback, so we only use the ellipsis if
it is in the main font.
[ChangeLog][QtGui][Text] Fixed a bug where eliding text could
change the height of its bounding rectangle for certain fonts.
Fixes: QTBUG-72553
Change-Id: Ib27fc65302465ddce661801bcc5ae32e55f1aeb9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The keyboard navigation with MovePageUp/Down and MoveEnd did not honor
disabled cells in all cases which lead to inconsistencies in the
navigation (esp. since MoveHome does honor them correctly).
Therefore make sure that all four move operations work consistent by
refactoring the code to use common functions.
Fixes: QTBUG-72400
Change-Id: I63fa3b626510d21c66f4f9b2b1bfb3261728ecaf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
C++11 added the new enum class key as well as enum struct. While the
former is likely the most known and used, the later can be used in the
same contexts and with the same effects.
Currently moc doesn't parse enum struct while it does for enum class.
This patch fixes this.
[ChangeLog][moc] moc now parses enum struct the same way as enum class
therefore that keyword can be used with the Q_ENUM macro as well as
Q_FLAG and Q_DECLARE_FLAGS.
Change-Id: Iaac3814ad63a15ee4d91b281d451e786b510449c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The current implementation of wildcardToRegularExpression doesn't
anchor the pattern which makes it not narrow enough for globbing
patterns. This patch fixes that by applying anchoredPattern before
returning the wildcard pattern.
[ChangeLog][QtCore][QRegularExpression] The wildcardToRegularExpression
method now returns a properly anchored pattern.
Change-Id: I7bee73389d408cf42499652e4fb854517a8125b5
Fixes: QTBUG-72539
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a comment in the code that said:
// It seems we need to use invertedAppearance for Left and right, otherwise, things look weird.
It's not clear what that was referring to, but in its current state,
a slider with invertedControls set to true will not behave as expected:
pressing the left arrow key will decrease its value instead of increasing it,
and vice versa for the right arrow key.
As stated in the documentation (and by its name), invertedAppearance only
controls the appearance of the slider, and not the effect of key events.
Remove the comment and use invertedControls instead.
Change-Id: I13296cbda9244413978ef0d7f0856065f74fd0bf
Fixes: QTBUG-25988
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Don't do several tests at once in the test function. Instead, move
the extra tests to the data function. This makes it possible to easily
add a self-contained test (i.e row) for an upcoming fix.
Task-number: QTBUG-25988
Change-Id: I65c8d7620f01107f8f59c96896b1a641d97f5fdc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Firefox, Chrome and various http libraries normalize /./ and /../ from
urls, but retain multiple adjacent slashes as is. Qt removes
duplicated slashes which makes it impossible to access some web
resources that rely on those.
Fixes: QTBUG-71973
Change-Id: Ie18ae6ad3264acb252fcd87a754726a8c546e5ec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
