as everything is built inside the common build/install dir, there is
no point in the fwd pri stuff.
as a "side effect", this makes it more straight-forward to relocate
non-prefix builds, which is the default on windows.
Task-number: QTBUG-28827
Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
move the regular pri file creation into the "sub-prf" and rename it
accordingly. the original reason for the split was the deep magic in
activeqt (and phonon), which is gone now.
Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-developer-build enables an actual build of examples, based on the
assumption that developers want to test it (it can be still disabled
with -nomake examples). regular users otoh want only the examples
sources installed.
Change-Id: Ifc6a108099929175a3960480802b271a758fdd38
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the top-level project is not installed, and the meta-project which is
used instead does not know anything about conditionals.
Task-number: QTBUG-28414
Change-Id: Id5785ab5f92373ece74699e3c28220fc7f9689ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we need to collect the sources of the install targets for the check that
all files have been properly handled, but of course we must not add these
files to the source install target, as that would mean double installation.
Change-Id: I6acb56f2a993b6ed81d1031d5dc0a0da30a53b54
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is supposed to workaround a race condition in the underlying
netstatus API: Sometimes we get an event that the Wifi interface
changed, but it is not up, e.g. no gateway (yet). In that case we need
to check back (currently: 300 ms) whether the interface has come
up or not.
This commit can be reverted again once the race condition in the
netstatus API has been resolved.
Task-number: QTBUG-29421
Change-Id: I215ce8aae4848b6e942e77c6425adba90e9cc526
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Revert to the pre highdpi-patch behaviour.
Before, both physical and logical DPI would be based
on the dpmx/dpmy variables, which could be changed
with setDotsPerMeter(). The highdpi patch introduced
separate ldpmx/ldpmy variables, which were not
changed by setDotsPerMeter().
This broke when loading images: setDotsPerMeter
would be called but the logical dpi would not change.
Remove ldpmx/ldpmy. Keep scaling the physical dpi
by the devicePixelRatio, which will be set to 1 by
default.
Task-number: QTBUG-29187
Change-Id: I0d6f5f3b8efae5fb1adc0a50b22a5da78324a282
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Use a normal instead of a HWND_MESSAGE-window since the latter
do not receive the "TaskbarCreated" message. Provide an invokable
slot in the native interface to register a window class for that
purpose.
Task-number: QTBUG-29160
Change-Id: Ic25222d08d21867f7d882a9e19d8aaf50f3f47cf
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Curiously, qmake could fix .prl and .pc files for unix, but only .pc
files for MinGW. qt_module.prf seems to have known this.
Task-number: QTBUG-28902
Change-Id: Ice9983a69813690c0d4b96ca11589440182569a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fully modular prefix build now puts the includes and libs into each
module's own builddir, so the else branch was simply bogus. Replaced
the else branch with the real base for modular builds. This allows
the paths to be successfully replaced when installing metafiles.
Change-Id: I056a923288965b560a4e9b0ba7add1aac912199f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it would have taken only the last line, which is clearly wrong. as
nobody noticed this, the handling is clearly not needed.
Change-Id: I6f4f45ce8c90cb9b0ef60abbaa5ed49b54d8b47d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Check that the NSWindow pointer is valid before
calling backingScaleFactor.
Change-Id: Ia23cbb4058b7d0fece008bc437f8bfec6c0ddebe
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
QtTestLib and QTestLib don't exist. The proper name is "QtTest" (code)
or "Qt Test" (English)
http://qt-project.org/wiki/Spelling_Module_Names_in_Qt_Documentationhttp://lists.qt-project.org/pipermail/interest/2012-December/005221.html
Files paths in qttestlib.qdocconf can't be changed easily however, as it
breaks things. So, they're left as they are.
Change-Id: Ifbc44ea858c453bedad8cd7723f847e67fc7a85a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The name field string was not set in native dialog when one was present.
Task-number: QTBUG-28342
Change-Id: I243b491c8bc094d45f25be96b3bde8eccbb65acd
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The default value for NSWindow::setRestorable: is true, it means
application will have some information for each window stored.
After a crash happened and application relaunched, the application
tries to restore those windows from the broken file. And then the
"Retore Windows" will pop up. There is no workaround for
application users or develoeprs. What they can do is to manually
remove the the saved application state file for the applicaiton.
To avoid that, better to switch it off.
Task-number: QTBUG-28281
Change-Id: I8ce3cd94f5ae81d7877a346743ca4e0e188baa02
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
If Qt build without BMP support, we need exclude this format
from output of QImageWriter::supportedImageFormats() and
QImageReader::supportedImageFormats() methods.
Task-number: QTBUG-27028
Change-Id: I44e8956247066c0836b1ff7bf9a1f356fe568af1
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
When Qt build statically result of
QImageReader::supportedImageFormats() must contain 'jpeg' and
'jpg' if JPEG support enabled.
Task-number: QTBUG-29222
Change-Id: I94d731c2d1e2ede148e2e5261a310a840a1d5523
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Qt::UniqueConnection is a flag, not a standalone connection type.
Change-Id: Ibafb7306f3d60753a4381897488131e6484d368f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QtWebProcess, for example, doesn't create any QWindow, so it doesn't
need any root window.
This fixes Webkit2 rendering on QNX.
Change-Id: I1d4c0dd20869798ba2bcd15f9d96e5fca4beb48e
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This is to ensure that the compiler won't optimise it out of existence.
Clang says it will do it:
testProcessCrash/main.cpp:50:5: warning: indirection of non-volatile null pointer will be deleted, not trap [-Wnull-dereference]
*(char*)0 = 0;
^~~~~~~~~
Change-Id: Iac7771046442f869e205e8789fffdd6443d58e67
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
These tests were added to Qt 4 on commit
a17fc85b51a6bdcfa33dcff183d2b7efd667fb92
Task-number: QTBUG-28985
Change-Id: I3cf595384f14272197dcfb85943213c8f8ddeba0
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
otherwise qmake will just take TARGET and lowercase and capitalize it,
which not only looks weird, but also does not match the Requires: fields
we generate.
Change-Id: I4a070ff256fffd2b780acb0361d4213d0032dbb9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Dihan Wickremasuriya <nayomal@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It's possible that different database libraries share dependencies.
We need to keep their link lists intact here so that QtSql's .prl and
.pc files will have them in the right order. Particularly important
when building the drivers into QtSql and using static linking.
Change-Id: Id371b127099f2790fe7cccd0c7059607600f447d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
VxWorks does not have QProcess support.
Change-Id: I917b769f967e9d71ec5025aae788f3e237b07aeb
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
(cherry picked from commit 416e73a0fc)
-copied snippet and input files from Qt Widgets.
-adapted new paths in the resource-system.qdoc file.
-removed the old path entry in qdocconf.
Task-number: QTBUG-29101
Change-Id: Ieeb118106756a1a39890ab219294de18f437c56c
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
Fix 19 counts of "Can't link to 'default-constructed value'"
warnings.
There was only one link to "default-constructed values", so the
cleanest solution was to change the keyword.
Also included a related typo fix.
Change-Id: I84b47743ecb72a1b2731ef65080fa1e630d478a4
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Snippet not showing because qdoc read wrong snippet file.
Due to 2 files having the same name.
One was renamed: rsslisting.cpp --> listing.cpp
Task-number: QTBUG-29101
Change-Id: I62b7eee6f2860613ee90538d8dea006b89000317
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
According to the documentation recently added mime
type converters should take precedence over previously
added converters. Make it so.
Task-number: QTBUG-25951
Change-Id: Ic23ca7cbb93a98711d762b1ef0e0dd2aa1ceaeda
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
