These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: If36b1b8f69c3509128786fec67899ae18ffaa2bc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This testcase fails on the Ubuntu 11.10 x64 platform, add flag to .pro
file so test is ignored on this platform.
Task-number: QTBUG-23380
Change-Id: I51831df8c8e9bfcf63d3689e37552ca1a62691cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Several of the test functions in the QDebug autotest call
qInstallMsgHandler() to temporarily use a custom message handler.
Unfortunately, these test functions were then resetting the message
handler back to Qt's default handler at the end of the test.
QTestLib also calls qInstallMsgHandler() to set a message handler that
redirects debug/warning/fatal messages into the test log. When the test
resets the message handler back to Qt's default handler, testlib's
message handler is bypassed for the rest of the test, preventing any
subsequent debug/warning/fatal messages from being visible in the test
log or subject to testlib's ignoreMessage() function.
This error also caused several of the test functions to fail if they
were run manually. The "defaultMessagehandler" test would fail if it
was run before any other test function and the "assignment" test would
fail if it was run after any other test function.
This commit fixes these failures by using a helper class to ensure that
the previously active message handler is restored at the end of each
test function, even if the test function fails or throws an exception.
Change-Id: I51376724d164c8ad126e5b9be76890bf3e6a9fb0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When verifying nonzero results (i.e. that something expected *did* happen),
using these macros allows bailing out of the timer much earlier than the
potential 5 seconds.
My running this on Linux goes from ~147 seconds to ~91 seconds.
Change-Id: Ie1e41252eb4eb295b5c8e795ded02f00eb7f9387
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Don't call QSKIP when omitting the optional part of the test, as doing
so hides the fact that the rest of the test passed.
Change-Id: I9c102e8daeaf9586b2e510c4c9ce697ead290795
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_VERIFY() to fail after a reasonable timeout rather than putting
the test into an infinite loop.
Change-Id: Ie0917556e15999a94cc0587f3f4c11c0d743a228
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Register the meta-type in initTestCase(), which is run once, rather than
in init(), which is run before every test function is run.
Change-Id: Ic62a2469da6a2a85254ffc7c4d893395202c50d8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The threadCount() test function is unstable and had been disabled by
making it not be a slot. It is better to disable it with QSKIP so that
the test output shows that the test function exists and is in need of
repair.
Change-Id: Iccdc8da31e0d15d922f7e9606835d1ff1a3a4966
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Avoid using bug tracker identifiers in test function names. These
identifiers lose their meaning when the bug tracker is replaced.
Change-Id: Ia867f7c2ec2ab9ed546588843d532ac615a34031
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored test data was marked as failing, but appears to pass, and
the available history does not explain why it was commented out.
Change-Id: I7e9e3ba72fc8fef42c91ee882efa98d25b3d8317
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The data file named "trolltech" has nothing specific to Trolltech in its
contents. Rename it to "testhtml". The lack of a file extension is
intentional.
Task-number: QTBUG-19653
Change-Id: Idc5c5f4ffa447151e47f66ff7364f0fa8753a699
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These all have consted overloads, so there's no need for them.
Change-Id: I3d4f63b8eb8f1b7df7fa772d6172e0a954184d24
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
For future proofing. No need for it to be so small.
Change-Id: I8a0c734f87671881f114922ada7c5bc9524de19b
Reviewed-by: Marius Bugge Monsen <marius@cutehacks.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument QByteArray extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QByteArray when the value actually is e.g. a struct of
mixed types the byte array extraction will crash as it attempts to extract
the struct data as a fixed array.
The fix adds DBus type checks to QDBusArgument byte array extraction
operator implementations.
The checks invalidate extracting arrays of other types than bytes to a
QByteArray that worked with the unchecked implementation. The rationale
for this restriction is
1) extracting a QByteArray to a variant checks already that the array
element type is byte
2) Results of extracting arrays of types wider than a byte to a QByteArray
are architecture-dependent making such code inherently non-portable.
Task-number: QTBUG-22840
Change-Id: Ie20f2adc06c697a68055c803215fb408568fdd90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument QStringList extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QStringList and the value actually is e.g. an array of
bytes the string list extraction will crash as it interprets the bytes as
char pointers.
The fix adds DBus type checks to QDBusArgument QStringList extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Task-number: QTBUG-22840
Change-Id: I4b67d75b59c5052d939f3a69f3e92dabdb3bdd6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDBusArgument string extraction operators and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting string-like basic DBus type that actually is e.g. an
integer the string extraction will crash as it blindly attempts to use the
integer as a pointer to char.
The fix adds DBus type checks to QDBusArgument string type extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Previously supported functionality of extracting an object path or type
signature to a string type is retained.
Task-number: QTBUG-22840
Change-Id: I29be1ae592658ca268c65ed692e1d42619d52280
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTestLib-based autotests cannot perform verification steps in the test
class constructor. This needs to be done in initTestCase() instead.
Change-Id: Ib1f7f838f052fa0fc5104603bdac01ffd8313aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC 4.6 fails to build the test because of narrowing conversion.
Change-Id: I927693789be7f3df7bd1a96c8924fc04716a03f0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of doing "I want Linux and do it by selecting Unix and
discarding everything not implementing the Linux ABI". Select the
other operating system first and have a catch all Linux/Unix anchor.
!symbian is left inside as it does not hurt right now but could probably
be removed before Qt 5.0.0.
Change-Id: I731d8349e4f9c0ac33d547523f0a0f422e994e54
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
That define is not used anymore when building qmake.
Change-Id: I6a478cf4bb6cc8dfe87a3cc96f1d520b08e4ba6f
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I3864017df6fc0daeb31b389c8883401d344730bf
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
