The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I399b5ea56e9255e775ca1746632f7421519a6616
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I3f1b836cfb47bba0fdc27f2c3aa7b0576d123dca
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I446f9ddc8f8de4a0b79b09edb44f7c1496fbc33f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QGL* has been removed amongst other things
Task-number: QTBUG-74408
Task-number: QTBUG-74409
Change-Id: Ia19774f2bb6d0b86b3fbde224cbc8652b4ae0b22
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The intended use cases for toString() are the situations where you
can't use operator<<, such as QVERIFY2, Q_ASSERT_X, etc., which means
that it will often be used as an argument to e.g. QString::arg(), where
the user has control over the structure of the message. For that
reason, adding an extra space to the end is not necessary and just gets
in the way.
This amends 658b9697f9.
Change-Id: I0695e6809026a0f92ed783899da80de4fa2a1684
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
qtokenautomaton is something from xmlpatterns. The fact that this
didn't fail with xml patterns not part of qtbase anymore shows that
the test doesn't do anything :)
Change-Id: Ibb1705fe57dac148f0283fba1193126d4d924868
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit ccb2cb84f5 and
commit 0f568d0a67.
The patches fix ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commits to keep the getter as is and change the signal name instead.
Change-Id: Iddbab7c33eea03826ae7c114a01857ed45bde6db
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
During a spring forward, a time-zone omits an hour. A QDateTime with
such an hour is invalid, but QDateTimeEdit's handling of this invalid
time was not done correctly.
With this fix, up/down changes of any field that would result in an
invalid date-time corrects the time to be valid, while leaving as
much as possible of the user-entered data unchanged. To do that, we
rely on QDateTime::toMSecsSinceEpoch to return a value even for such
an invalid time, which then can be used to construct a valid
QDateTime.
Edits that would result in an invalid hour are reverted to the
previous when pressing return, if correctionMode is
CorrectToPreviousValue. This change also implements support for
CorrectToNearestValue, which uses the same mechanism as when stepping
over an invalid time.
Include a test that verifies that the various interactions result
in a reasonable value. Since QDateTimeEdit does not respect the
timezone or timespec of the QDateTime it is initialized with, we
have to find the first hour of daylight saving time for a year
that we know works for most time zones. Failing that, we have to
skip the tests. Verified in a wide range of time zones.
Change-Id: I05b906ae3b5f6681891d23704f00f9c10cd479ae
Fixes: QTBUG-79803
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As per the ### Qt 6 comment. A method visitedPages should, following
the convention of the other QWizard APIs, return a list of QWizardPage
pointers. Since the method returns a list of IDs, visitedIds is the
correct name.
[ChangeLog][QtWidgets][QWizard] visitedPages has been deprecated, use
visitedIds instead.
Change-Id: Ifdb94adf093be14cb48c84cb40818c55ff5189a0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
It used QGLPixelBuffer. Not sure how/if it could've been ported to QOpenGL.
Task-number: QTBUG-74408
Change-Id: I1271f501ccad4ae391ee0f6fc5a1ddfaf46ef0af
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Replace with a parser which actually does the job right, fixing
various infelicities in the parsing in the process.
Make the parser strict about formatting.
Adjusted tests to match. Fixed some QTime invalidity tests to each
test only one invalidity at a time (the invalid year and day tests
also used an invalid month).
[ChangeLog][QtCore][QDateTime] The parser for the Qt::RFC2822Date
format is now stricter, requiring the text to exactly match the form
of one of the relevant formats. A valid date or time will still be
parsed, even if the other part of the content is invalid, as long as
it (and any offset, if present) has the right form. In particular, the
parser now rejects texts with trailing cruft (other than space).
Fixes: QTBUG-80038
Change-Id: Id25675afd75f82f6351f20e79f0154f3ceda35ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Freetype can give us non empty bounds for zero-width characters,
this change just makes us skip metrics of characters already found to
not contribute to text advance. The coretext and windows
font-engines already uses the already calculated advance.
Change-Id: I82b3521a4fb92614be509be5982cd5ab9c1eb7de
Fixes: QTBUG-58854
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Flaky fails in this test suggest that the VM on which the
test is executed does not get CPU resources allocated for enough time
to make this test pass. This change makes the test more resilient by
taking the measurements as quickly as possible.
In addition, use a sanity-check based on std::chrono APIs to abort the
test completely if we see that the clock has advanced too far to make
the following tests meaningful.
Change-Id: Ie6ac4ffb52f20e7774014f8222c9cd8f54d8a263
Fixes: QTBUG-64517
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Recursively defined entities can easily exhaust all available
memory. Limit entity expansion to a default of 4096 characters to
avoid DoS attacks when a user loads untrusted content.
Added a setter and getter to allow modifying the expansion limit.
[ChangeLog][QtCore][QXmlStream] QXmlStreamReader does now by default
limit the expansion of entities to 4096 characters. Documents where
a single entity expands to more characters than the limit are not
considered well formed. The limit is there to avoid DoS attacks through
recursively expanding entities when loading untrusted content. The
limit can be changed through the QXmlStreamReader::setEntityExpansionLimit()
method.
Fixes: QTBUG-47417
Change-Id: I94387815d74fcf34783e136387ee57fac5ded0c9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make the order checkable and checked are set in insignificant, by
storing ignored checked value for un-checkable actions.
Also gives checkable its own changed signal.
Change-Id: If03db7c92481a542b6220604860abddb322bb517
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Following wg21.link/LWG3228, it was found that a proper variant fix
requires that T* -> bool conversions be treated as narrowing
conversions in subclause wg21.link/dcl.init.lst. wg21.link/P1957R2 was
accepted in Prague 2020 as a DR and retroactively applies to older C++
standards.
Since we hard-code the algorithm of [dcl.init.lst], we can and must
add this manually.
[ChangeLog][QtCore][QObject] For the purposes of
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT, pointer
(incl. pointer-to-member) to bool conversions are now considered
narrowing. This matches the resolution of a defect report in C++
itself.
Change-Id: Ifa9a3724c9c8ccd3dd6614928dbbe37477591dc1
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
On Windows, the test was leaking a registry key
HKEY_CURRENT_USER\Software\tst_QSettings_trailingWhitespace
Fix by using .ini-Format in the temporary directory created by the test.
Amends e66a878838.
Task-number: QTBUG-22461
Change-Id: If141a9e72e8faebc3fc46b94dab7b4b728a75292
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test was failing due to missing windows resource files which contain the
version information for the executable.
Change-Id: I19b0c747c6b833bac64f3667e9286350e7842b7c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Teste executables were not built in the right location.
Change-Id: Ice05d44d53f7d8c2e9ec5a7b5c011a24ceb02a09
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QAbstractItemView::setIndexWidget() does not trigger a relayouting when
a new widget is set. This results in a wrong editor geometry under some
circumstances. Fix it by triggering a delayed relayout.
Fixes: QTBUG-81763
Change-Id: I75d0e19bd5e56d63effe4990d782d202fb39e3e6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This template function streams the given object into a QDebug instance
that operates on a string, and then returns that string.
This function is useful for cases where you need the textual
representation of an object for debugging, but cannot use operator<<.
A good example of this is when writing tests where you want to provide
a useful failure message involving details about an object, but must
provide it in a string to e.g. QVERIFY2.
[ChangeLog][QtCore][QDebug] Added static template toString() function,
which streams the given object into a QDebug instance that operates on
a string, and then returns that string.
Fixes: QTBUG-82309
Change-Id: I8411394e899dedad19cec788d779a4515d52ba11
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
0. The recent patch fixed the case when we can suddenly (meaning from
a particular version of Darwin) bind on a port number 1. Unfortunately,
it's not the case for IPv4 and while fixing one test case, the patch broke
another - so this patch addresses this.
1. Unfortunately, binding on a fixed port 1 on macOS made the test flaky
- we run this 'bind' several times and sometimes OS thinks port is already
bound (because of the previous test case) - closing the connection seems
to fix this problem (thus this patch do this also).
2. As a bonus a proper resource management added (aka RAII) where we would
previously leak a socket in case some QCOMPARE failed.
Fixes: QTBUG-81905
Change-Id: I90c128a332903bb44ab37de4775ca00d390dc162
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Make the test operate in its own temporary directory, so that entries
left behind by other test functions don't impact this test.
Also, call QFileSystemModel::sort explicitly; it would otherwise only
be done once through a single-shot timer, and the test processes events
until the model is populated, which might not process that delayed
sorting. Since dirsBeforeFiles tests the sorting algorithm and not
the sorting logic, best to do this explicitly.
In case of sort failure, print diagnostics.
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes: QTBUG-75452
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
(cherry picked from commit 4e796e0b0d)
Change-Id: I144b68a17280a38cc7d6daf7ec343eea4453623d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 67491e2df5)
Change-Id: I30eef8cfc94988e6cad500dd5e6722488c2985be
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 5c520f4b0a)
Change-Id: I97644b5b4654b4c96fbc99858bbf191e6edb5977
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Modeled after QRhiTexture's NativeTexture query.
This becomes valuable in advanced cases of integrating external native
rendering code with Qt Quick(3D), because it allows using (typically
vertex and index) buffers created by Quick(3D) in the custom renderer as
well, without having to duplicate the content by manually creating native
buffers with the same vertex and index data.
Change-Id: I659193345fa1dfe6221b898043f0b75ba649d296
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
