in the case of sprintf it's surprising, in the case of join it's
anti-thetical.
Change-Id: I4eb7e56d31ac6ed68adf852f1a19b33554d38eb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
depend_prl would so far only ensure that the dependency existed, not
that it would be up to date. this is of only limited value, so make sure
that the dependencies are always updated.
as this is somewhat expensive (every dependency's makefile will be
entered as many times as it is used, plus one), provide an opt-out by
adding fast_depend_prl.
Task-number: QTBUG-29486
Change-Id: Ifa2e100bc4c269a403ab620927bfe5c7efe9a435
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
unlike before, the output dir is now important already during the project
evaluation phase, as finding .qmake.conf depends on it if .qmake.cache is
also present.
ChangeLog: fixed qmake -tp vc (and configure without -no-vcproj)
Change-Id: Ifdb95f3b38a70c0d08e71238059292e761dcfa53
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
unlike unix' mkdir -p, windows' md complains if the directory already
exists. the workaround is a quite complex command, so the so far used
concept for assembling the command line from pieces was replaced with a
single template. for symmetry, adapt the makefile existence check to the
new concept as well.
QMAKE_CHK_EXISTS and QMAKE_MKDIR_CMD were added, with hard-coded
fallbacks (ugly).
QMAKE_CHK_FILE_EXISTS and QMAKE_CHK_EXISTS_GLUE (introduced in 5.0.0)
are simply deleted again.
QMAKE_CHK_DIR_EXISTS and QMAKE_MKDIR remain for legacy reasons, as qmake
emits them into the Makefiles, and custom commands may rely on their
presence.
Task-number: QTBUG-28132
Change-Id: I3d049cb5d26947e5c3d102d0c2da33afb2a95140
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
let the backslash escape only quotes (and itself), after all - $$list()
(one of the main users of this function) is commonly used with (windows)
path lists, so letting it escape anything would make a royal mess.
Change-Id: I2dae2e4508903e62c190c1497da68d53978118e7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
any of the directories may be the root, which would lead to double slashes
in the constructed filenames.
Change-Id: I053e167a19b795b40e780fc29db356c7f24d286a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this allows skipping an entire feature file if a condition is not
fulfilled, without putting the whole body inside a conditional.
Change-Id: I84fe9c94dda58c794fb52c3f163b40563b0db30a
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
we have proper fallback paths further down the line.
Change-Id: I3648cc985d21bbec4c2c24e179830db4467af210
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the purpose of it is truly elusive - the output directory is maintained
by the surrounding code anyway.
Change-Id: Id1a481d85a7b83ab0676ef650c900414d0ba83b3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
d28073d9 creates a distinction between "mac" and
"macx". The latter is not set on iOS, which caused
MakefileGenerator::target_mode to be set to TARG_UNIX_MODE.
Check for the "mac" active config instead of "macx".
Rename TARG_MACX_MODE -> TARG_MAC_MODE.
Change-Id: I7192788c33f5723034ba76da2492379dd454f0ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
this makes it possible to properly parametrize alternative linkers.
Change-Id: Ia9cf574544a0259975470366d278b6c5dc747906
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Some headers, like assert.h, check for the presence of NDEBUG.
We already define NDEBUG for MSVC/vcproj release builds.
Task-number: QTBUG-3389
Change-Id: I3b1510d47ff80611aa8072e66492ff2d648393eb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: Ic04da6063863585665c9133caba0279ba478fbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
When a framework is referenced in the XCode project then it is known as
a framework by the lastKnownFileType and not the reference type. This
ensures it works in both XCode 3 and XCode 4.
Task-number: QTBUG-29371
Change-Id: I434246a46d6c5bfd50ba7de1a7c710c0caf0bc0a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
We're not in the output directory yet, so resolving using vanilla
fileFixify will end up failing when we check if the file exists, since
QFileInfo resolves relative paths against the current directory.
Change-Id: I414c6a2e83b49e3fb30e6153a49f7a90a8e528a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The Xcode generator seems to have been written with the assumption that
writeMakeParts() would be called with the output directory as the current
directory, but that's not the case when shadow-building. Perhaps this
was changed in qmake at some point, and the Xcode generator was not
updated to reflect that.
Instead of replacing every occurance of fileFixify and other logic to
deal with paths, we just chdir into the output_dir for the duration
of the function (except when writing the 'make qmake' makefile, as
the regular makefile generator works as expected with the current
directory set to the input directory).
Change-Id: I6ba492036d73f29f4adbd7cd554db9504050629e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We already assume that if a source is buildable and should end up in OBJECTS we
can let Xcode build it, so we skip this input for the extra compiler.
Change-Id: I17b2408925b8e6513f0fa0d2459ec539bf7381d3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The PBXResourcesBuildPhase will optimize resources, such as turning XIB
files into NIB files, running pngcrush on images, turning string files
into binary plists, etc, so we prefer that if possible.
Unfortunatly this phase does not support custom paths, so whenever we
encounter bundle data with a custom path we fall back to the regular
PBXCopyFilesBuildPhase.
Change-Id: I539db03dd7982fd37293123b6428cdb695f64d2b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The Xcode generator creates a makefile for running 'make qmake', and the
makefile passes -o to ensure it writes to the same Xcode project. This
fails when qmake then treats -o foo.xcodeproj/project.xcproj as not only
setting the output filename, but also the output directory to foo.xcodeproj,
which results in the Xcode project trying to reference files relative
to this directory, such as '../main.cpp'.
Unfortunatly the output filename parsing happens too early for us to know
whether or not the generator is Xcode, so we just have to assume that
a certain combination of output filename and directories means we are
generating an Xcode project.
Change-Id: I0901d4db995f287c35cbbbd015683d5abda6d0f5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace them with dashes, like Xcode itself does.
Change-Id: I302425363a2eef13394025cd4a9e414048ce55ce
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There was quite a bit of cruft left over from older Xcode version. We
now produce Xcode 3.2 compatible files, similar to what Xcode would do
when asked to upgrade one of our generated files. In particular:
- Removed refType
- Set more lastKnownFileTypes
- Renamed defaultConfigurationIsName to defaultConfigurationName
- Add runOnlyForDeploymentPostprocessing = 0 to build phases
- Don't put buildSettings directly into PBXNativeTarget
- Don't write productSettingsXML
- Don't write startupPath
- Don't write name when path is the exact same
- Write empty buildSetting lists as empty string
- Don't write empty PBXBuildFile settings
- Don't write generated/neede filenames for PBXShellScriptBuildPhase
- Use PBXFileReference instad of PBXFrameworkReference
- Prune deprecated buildSetting variables
- Remove deprecated PBXBuildStyle sections
- Resolve correct CC/CPLUSPLUS/LDPLUSPLUS
- Write IPHONEOS_DEPLOYMENT_TARGET
Change-Id: Ia2365c2623fe898878bd10636c3b85145c1cff04
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Instead of letting each qmake variable have its own auto-generated name
we try to group common variables into similar groups as used by the Xcode
templates provided by Apple.
We also prevent the same files from ending up multiple times in a group.
Change-Id: I73b13d6071bb7b3cd1501c422a99c60743221485
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The Libs: line of the pkg-config files is constructed
by taking the name of the .pc file itself, and stripping
off the path and extension. However, the code which does
this does not handle path separators correctly when the
target OS and local OS are different. To get around this,
the custom string manipulation was replaced with a call
to QFileInfo::completeBaseName(), which can handle the
different path separators correctly.
Task-number: QTBUG-29700
Change-Id: Ia817b415d303b249f56fcc3d1f073cae99c43046
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Replace the old sed / template @FOO@ method with echo.
Enable MSYS bash to build qmake.exe
Use qmake/Makefile.unix for all win32-g++ builds.
Change-Id: I6e27d69b28d27131838bbbb3a4ee5a08b470f31b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of after parsing the makespecs, were we assumed QMAKE_PLATFORM
had been set by the makespec and did an explicit update.
Allows loading platform specific features from within a makespec after
updating QMAKE_PLATFORM.
Change-Id: I0eb3b7fb88ce48b00a384850c5d87223c06234d7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In our incremental linking command block we relied on del never
returning a non-zero exit code. Other command line interpreters
than cmd.exe, e.g. TCC, behave differently.
We now check for existence before trying to delete the manifest
file.
Task-number: QTBUG-29698
Change-Id: I94d125998da6f2c0377104f7e83cdd9e8b838329
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
$$(FOO) would automatically split the contents of the environment
variable at whitespace (and interpret quoting inside it). the way to
prevent the splitting (but not the quote interpretation) would be using
"$$(FOO)".
this behavior is entirely unexpected and thus an incredibly effective
source of quoting problems - according to a grep over the whole qt
sources, there isn't a single case where things were done right. in qt
creator, well over half the cases are wrong.
also, the "feature" seems entirely pointless: nobody uses spaces as
separators in environment variables.
consequently, simply remove it, even in a patch release. i'm postulating
that nobody will complain.
Change-Id: I9ed3df1b0d1ef602acd78ceb118611d294561da6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We don't have to do fuzzy mkspec name searches anymore.
The WinCE mkspecs add "wince" to QMAKE_PLATFORM which ends
up in CONFIG.
Change-Id: I6c0576b5504beb416e95eeae0dec579b16b84746
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
introduce the QMAKE_PKGCONFIG_FILE variable for that purpose.
this is another feature that is needed for a bugfix ...
Change-Id: I08f470e1b2b7dd318af9195330c15d813fcd55ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
#!/usr/bin/env ruby
Dir.glob('**/*.cpp') { |file|
# skip ast (excluding paste, astpath, and canv'ast'imer)
next if file =~ /ast[^eip]|keywords\.|qualifiers|preprocessor|names.cpp/i
s = File.read(file)
next if s.include?('qlalr')
orig = s.dup
s.gsub!(/\n *if [^\n]*{\n[^\n]*\n\s+}(\s+else if [^\n]* {\n[^\n]*\n\s+})*(\s+else {\n[^\n]*\n\s+})?\n/m) { |m|
res = $&
if res =~ /^\s*(\/\/|[A-Z_]{3,})/ # C++ comment or macro (Q_UNUSED, SDEBUG), do not touch braces
res
else
res.gsub!('} else', 'else')
res.gsub!(/\n +} *\n/m, "\n")
res.gsub(/ *{$/, '')
end
}
s.gsub!(/ *$/, '')
File.open(file, 'wb').write(s) if s != orig
}
Change-Id: I3b30ee60df0986f66c02132c65fc38a3fbb6bbdc
Reviewed-by: hjk <qthjk@ovi.com>
(cherry picked from qtcreator/29a93998df8405e8799ad23934a56cd99fb36403)
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
/Gs[size] will be added as additional option as there is no XML element
for this option.
Task-number: QTBUG-29329
Change-Id: I1f09bfdac90f9c5f2333dc03e6e4e6a206b4f6d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The default must be "unset" to let the user's MSVC settings decide
what the default value is.
Task-number: QTBUG-29329
Change-Id: I6015202c123dbb7304941b0d24557a26a1e3236c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is undeniably a new feature, but it's needed for a bugfix.
Change-Id: I951a3128eb580404ee0c7e3cdcb4d6170e899f70
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the vendor string was changed, so compat is broken anyway.
Change-Id: I07241843237ce28bd7a869bb4170c7e4c8d084df
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Curiously, qmake could fix .prl and .pc files for unix, but only .pc
files for MinGW. qt_module.prf seems to have known this.
Task-number: QTBUG-28902
Change-Id: Ice9983a69813690c0d4b96ca11589440182569a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Metafiles such as .prl and .pc files contain paths that have to be
adjusted during installation. The same code is used for unix and
windows so move it into the base class.
Change-Id: I82db89ec83820a4fa0214ba15e7cd63438f6dc91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This reverts commit e81d7fd1e5.
The insane logic that prepends the version number of a lib to
TARGET_EXT instead of appending it to TARGET breaks every vcxproj
with a library version.
Fixing this properly will require much more work and testing on all
supported Windows platforms.
Forward-port of 8869b3b3 in qt/qt.git.
Task-number: QTBUG-29286
Change-Id: Ib96de9c6f41995af013b146a00c850c9da3a9d8d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Avoid runtime dependencies to e.g. libpwinthread-1.dll, libstc++-6.dll.
This prevents Qt Creator from spitting out error dialogs on each startup
for registered MinGW versions that aren't in the default PATH.
Change-Id: Id55518db8c8e0521b6a41add1eaf38f75a892c8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
A new qmake's variable RC_ICONS is introduced to specify the icons.
The first one will be used as the application's icon.
Change-Id: I4218db795837d470087dff8526eb0e4cb81ce5ed
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these variables are somewhat magic: they are relative to DESTDIR, and
they also specify the installation location relative to target.path.
the actual output directories are created by other code.
Change-Id: Iead3006057516f5a49b6fd4bd8996a062c984fce
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The resource id must be 2 for DLLs. This was broken for the
"debug with incremental linking" case.
Task-number: QTBUG-28682
Task-number: QTBUG-28683
Change-Id: Id8c48a1dec30e341de949213c63c1c9b73956dac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Manifests must be embedded into DLLs with the resource id 2, not 1.
This fixes a regression introduced in commit c9406bcf.
Task-number: QTBUG-28524
Change-Id: I93b1dfe4614d0535f47fd881b8688a23e83e845f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ismo Haataja <ismo.haataja@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In RC_INCLUDEPATH one can add include paths for the Windows resource
compiler.
Task-number: QTBUG-13776
Change-Id: If1d9ed44097adb7789df03e4ccd4e3b7df9e8d08
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
In single config mode extra compilers were not written to Visual
Studio project files, because they were not added to the fake project
object we're using to write a single config project.
Task-number: QTBUG-27505
Change-Id: Ie57b648861573496252f1383dc77e0729e244947
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
ProductVersion is set to the same value as FileVersion.
Task-number: QTBUG-27428
Change-Id: Ia01e14112d3a0e74b9fbe5fc8d9c4f9ae690db34
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Rename LINK to LINKER. The MSVC linker uses the environment
variable LINK to pass additional command line arguments.
We must not hide this variable.
Task-number: QTBUG-28332
Change-Id: Id78476d1cf4a73175b9f47292c67f38a43ae5ba4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
nmake depends on a variable being assigned before it is referenced, so
just write it out to every Makefile as the very first thing.
this is nicer than the previous hack anyway.
Change-Id: I50f409919352f560f7ef6c848a2f7c51d1878148
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
complementary to QMAKE_RPATHDIR. this avoids that we need to sprinkle
linux/gcc specific code all over the place.
Task-number: QTBUG-27427
Change-Id: Iebafd1749d1a0d803704902473df8c743f074ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The LIBS statement generated into Makefiles contained duplicate
libraries when application was linking static libraries.
Fixed by adapting the logic from unixmake.cpp's version of
processPrlFiles() to remove duplicates.
Change-Id: I12e152900233d0376b7d7ac6cd18a92850a6d640
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
this is necessary for having a clean way to recurse even from leaf
makefiles.
the location where the variable is written in the makefile is somewhat
bizarre, but the code is so convoluted that finding a better place would
mean either a lot of duplication or a lot of prior refactoring.
Change-Id: I68e4cf7e3814f6c60b2e3421d69775c993dafb23
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Windows static builds currently fail due to overlong command
link lines containing multiple occurrences of base libraries.
Task-number: QTBUG-28131
Change-Id: Ibf7f551fc98c879111b32b27a16f4e96260743c7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When sifting through a file to find Q_OBJECT and friends, qmake
was locking it for reading and writing (_SH_DENYRW).
This breaks parallel builds where multiple qmake instances might want
to scan the same file.
Changed the sharing constant to _SH_DENYNO, which doesn't lock the
file at all. This is consistent with the _sopen_s call in findDeps.
Change-Id: I9c0a06db7f580f411e79d9d96dd36a6d705679aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This fixes linking on MinGW after the library renaming, and is also
in line with the logic in the nmake generator.
Change-Id: Ie25ce6c1d2b8f292c4e454db1cad9bcbbee7a05d
Suggested-by: Erik van Pienbroek
Task-number: QTBUG-27137
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this should be fatal, but so should be a lot of other conditions.
Change-Id: I0c2c0bb9590ea1e4d0eae76e29eda34915914217
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qmake automatically appends the library's major version number to the
DLL file name on Windows, as DLL naming doesn't include the version
number on a suffix like on Unix systems.
This flag makes it so qmake skips adding. This will allow us to insert
Qt's major version number at a different position.
Change-Id: I25d471038841fb0c5a34ef6b3bd6266aa33cebd1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
DEPENDPATH merely says where to look for impliciit dependencies, not
where to find explicit ones.
fwiw, the other way round may be considered correct, but DEPENDPATH
exists for the sole purpose of limiting which paths should cause
recompilations, so it would be counterproductive to extend with with
VPATH.
Task-number: QTBUG-11912
Change-Id: I86450b5fd5aeb1f1b015b53f0adcd167ff4ce04d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When writing a file with write_file() we have to inform the pro file parser
cache to discard the file if it's existant in the cache, to ensure that
calling include() after write_file() always works.
Change-Id: I7d09269a57de55ca30b0e11dd40770de9f919f64
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The content in the prl file is not compatible with what CMake
expects in the value of the IMPORTED_LINK_INTERFACE_LIBRARIES
property. That property expects a list of IMPORTED targets or
full paths to libraries.
The prl file gives us a whitespace separated string of content
suitable for passing to ld, that is, it contains -L and -l content.
As this would take a lot of error prone parsing in cmake code in
order to resolve the content to a list of full paths to libraries
(which can be processed by any cmake generator), it's better to
remove the code until qmake is able to generate a list of full
paths.
Change-Id: I72fe8e862b7f3bd25a7f9a03db94d2e9b815d08a
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The generated CMake files need to pass ';' separated libraries to
the IMPORTED_LINK_INTERFACE_LIBRARIES property, otherwise we get errors
such as this:
http://testresults.qt-project.org/ci/QtTools_master_Integration/build_00386/win32-msvc2010_Windows_7/log.txt.gz
(grep for QtCore5.lib.lib)
Rather than a naive and error prone replacement of whitespace, generate
the appropriate ';' separated content directly in the qmake prl file.
Change-Id: I8eb5e233a0318b57ec74b86d910583ff99c29415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This fixes a problem when the preprocessing scripts were called from a
path with spaces in it.
Task-number: QTBUG-15317
Change-Id: I92ea85e12e2f9abfc262a8dcaa4f414e471e468c
Reviewed-by: João Abecasis <joao@abecasis.name>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add failing when crosscompile for Windows CE
and no matching SDK is found.
Change-Id: I359e792fe46bab46729788666679a16cb94f340e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Due to all the changes recently it broke in some places, this now
gets it working again.
Change-Id: I879ca5684435289a61d8db248f2c3f64f6866a60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When generating the solution file it should extract the
dependencies from the pro file as this will bring it in
line with the Makefile generators.
Task-number: QTBUG-22561
Change-Id: I8d5b6607712f2c77c87ef093480e64b9633817d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Fix "warning: anonymous type with no linkage used to declare variable
'<anonymous struct> dotNetCombo []' with linkage".
Change-Id: Iaff0d460df53fd6d0732d39bf633688805f5c653
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The differences to VS 2010 project files are the
version number (surprise!) and the PlatformToolSet tag which
sets the version of the toolchain.
Change-Id: If26f08fad1a69d7e6cd28cc5e860ff964f19b264
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I9c9964703dedfdab6e7bfac80be22bd5570e2e49
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Same reasoning as for 68e04c3ac1 applies.
Adding the overload was easier than to teach a Perl script to distinguish
between QStringList and ProStringList instances...
Change-Id: I6de6ecf21fdad135ac213b5c794927a9bc120a92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise we end up in the source tree, which is counterproductive.
Task-number: QTBUG-26869
Change-Id: Id44a94f827dc285c75b9b243c8ef6478e668e3ff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the original value is not used any more after the final resolution.
Change-Id: Icadc219f045a1bbfd20506c4c72c53d1fb352969
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the functions are not versioned or scoped, so user-defined overloads would
mess up qmake's own feature files. it seems safer to break user projects
than to allow the user to break qmake.
Change-Id: I020a2e6416bbb6e2fd2ece339629d848c00c8398
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it was merely an artifact of using QString::simplified() on the
unparsed (!) project code. there is no reason why anyone should actually
rely on it, so just remove it.
Change-Id: If9b957c4b1263f3990a2331f8851bb1c06154ea8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the file has no dependency tracking, so changes to the source would get
missed and cause hard to debug build issues.
and as nothing does dependency tracking on that file, this change
doesn't even cause a noticable performance regression.
Change-Id: I108b490b71a43018e0c7ef5d7c0b11d79a8e726b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
cpp files should include their own headers first (but below config.h)
Change-Id: I10ef37854843ae6438d68f96ce5ee83eede33db5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
we have been warning about such functions for a while now, now execute.
the qmake language is (generally) case-sensitive, so this wasn't all
that useful anyway.
Change-Id: I1388ac2d5a1104389aeb3347e739a0d5e69e138d
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the world has awaited this moment for a long time. very patiently.
Change-Id: Iba8697e7eebb5cdd43caadb64cd89126de395e66
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's a pretty braindead thing to implement control flow statements as
(built-in) functions.
as a "side effect", this fixes return() value handling for lists.
(cherry picked from qtcreator/f53ed6c4b3feca59a94d4f0de8b1a7411122e30e)
(cherry picked from qtcreator/f529e22ec38fb9a656d74394e484d2453cf42c69)
Change-Id: I59c8efa0e4d65329327115f7f8ed20719e7f7546
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
for faster bootstrapping without a full syncqt run
Change-Id: I648f0a8fb09be021590c46e8e5e15667a316c817
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a monster commit which does the following things:
- import the evaluator as-is from qt creator into qmake/library/
- integrate it into qmake's makefiles
- overwrite proitems.h with actual special types
- remove the parts of Option which are redundant with QMakeGlobals
- make QMakeProperty a singleton owned by Option::globals. the dynamic
handling so far made no sense.
- make QMakeProject a subclass of QMakeEvaluator, with relatively few
extensions
the changes to existing qmake code outside project.* and option.* are
minor. implementing the changes gradually would mean changing a lot of
code which will be just replaced in the next commit, so i'm not wasting
my time on it.
Change-Id: I9746650423b8c5b3fbd8c3979a73228982a46195
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This issue originates from https://bugs.webkit.org/show_bug.cgi?id=95736
Suppose we have
main.cpp
somedirectory/someheader.h -- which has #include "anotherheader.h"
anotherheader.h
With unix generator, the directory where main.cpp is located is included,
unless no_include_pwd is set. Hence the look-up of anotherheader.h from
within someheader.h will work.
With MSVC this works because MSVC looks "in the directories of any
previously opened include files in the reverse order in which they were
opened." (from http://msdn.microsoft.com/en-us/library/36k2cdd4.aspx)
Unfortunately the build breaks with MinGW, because it lacks support for
including the source directory in the include search path just like the
unix generator does.
This patch adds the same functionality to the MinGW generator as well as
an auto-test.
Change-Id: Iea8bb06e34862c51b8fd4eca2ee26668e24a319a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Make sure all C++ class comparison operators are const.
Change-Id: Ib4a66f2afe6c62f437dae1ecde94287d3db8442d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <faure@kde.org>
this is preparation for adapting to a new evaluator.
Change-Id: I6fc59f5525735754a00afa6629fbfe257e84db97
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this may have worked a decade ago, but now it only produces funny
Makefiles (and needs hacking main.cpp). the feature doesn't seem *too*
important, so just clean it out.
Change-Id: I50a60b0e30341f0b523e4a5731c770c9c1013f8b
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't read the spec from scratch for every library just to get
QMAKE_LFLAGS_RPATH. we can perfectly use our current project for that
purpose.
Change-Id: I4e408b3fd5de81652181df032aa53cd8f2f8f806
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's a dynamic property which is something between meaningless and
misleading when used outside a project file.
also, experience from creator shows that people would consistently
abuse it (not handling it as the list it is).
Change-Id: Id52cd40da5c38c0c74535d0701fdae53dfa39cad
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it was unused for a decade. and broken, of course.
Change-Id: I9713d595d95c5b074ef96dfe9b1c314b9198bd7e
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
QMAKESPEC is now always set
Change-Id: Ib3f7356a9260d42315747095e28db6604b2dcfe9
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
now that "make depend" actually works again, just clean out the gunk.
Change-Id: Ia1858a2474c9a4544ae16c53349aa7ae09e0c685
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
i'm only guessing what was intended here.
Change-Id: I72bfa3b5fad63f5b144d34762152e4dd851197ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This enforced lowercasing causes subtle errors, like changing the
drive letter case when doing $$files(), which makes it difficult
to do any string matching against the result later.
Task-number: QTBUG-26985
Change-Id: I4973e3ac3e851e24af944295edf290cc98f02fb6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The Microsoft Resource Compiler bails out if the rc file contains
non-trivial file name references. In particular it doesn't like
dashes in file names. We're now always quoting the file name.
Change-Id: I67b8d2c13010a0b2ec26cac915ebd1be95f1c274
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The existence of the manifest backup is used as a marker to decide
whether to embed the manifest in a second link step or not.
If it's present, the embedding took place in the first link step.
If it's not present, we must link again incrementally.
That logic was implemented faulty.
Change-Id: I10154dbbbe70c7981795ac66d46a166907ba13ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The rc file is in the same directory as the manifest file.
Therefore the include must consist of the filename and must not include
the file's path.
Change-Id: I4f5ac11b131f39ea8c425aca93fcf82d150c0204
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
By putting object_with_source into CONFIG one could force qmake to
output each object file into the same directory as its source file
came from. This was a rather nasty work-around from Qt 3 times to
support source files with the same file name in a project.
Unfortunately this doesn't play nicely with shadow builds.
Change-Id: Ie79e14d36ba6eac4219edc14ea75ab6a96f9ea96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
we cannot just completely stub it out, as then there are no dependencies
on whatever targets we actually *want* to be built.
Change-Id: I32a92fa937d099c153a0082feae5d23e3998ba48
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it works better when it castrates the app template, rather than staticlib
Change-Id: If52960fb48d770e8ec096c66b579539512b8d299
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
When embedding manifests we modified the EXE/DLL after linking using
the manifest tool. This breaks the incremental linking feature of MSVC.
The MS way to embed a manifest without breaking incremental linking is:
- let the linker create the manifest file,
- create a resource that contains the manifest file,
- invoke the linker again to embed the resource.
The embed_manifest_{exe|dll}.prf files have been removed.
All manifest logic is now in qmake's nmake makefile generator.
With QMAKE_MANIFEST one can specify a custom manifest file that gets
embedded without disturbing incremental linking.
Task-number: QTBUG-22718
Change-Id: Idb9d2644a0577b2002cbdd2d62b695b9171b1bd5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of re-assembling a list from the variables, take the original
command line minus some explicitly stripped out options. this is way
less code and poses no synchronization problem between the two parts.
as a "side effect", variables obtained from $QMAKEFLAGS won't multiply
with each makefile nesting level, as the generated command line won't
replicate data obtained from the environment.
Change-Id: I5d1ce0f11efb338f60405529f9818910103b1b0e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it wouldn't do anything particularly useful when parsing QMAKEFLAGS, so
take it out of the common path.
Change-Id: I60f1215c4645707e1f99932dd19160e1d1c9d953
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this adds a .base "member" to the install "structure". if specified, only
this much is stripped from the front of each element of .files, rather
than the entire path, to obtain the target filename.
Change-Id: Ic39fcf71c4ad874ffabbbad113be9cdc6e3f7260
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't make a single string, but a string list which is join()ed in the end.
this is a tad slower, but the code is way easier to work with.
Change-Id: I1ff7168c2770998761a6081be8080c743ddc94a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
make a proper stringlist of commands, and join it in reverse order
only at the end. the reversal ensures that we can cleanly fold up
directory hierarchies we may build.
Change-Id: I9a241361588a6965283aec5258e1d622b35514e0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Microsoft has named their new Visual Studio again
after the old naming schema.
Change-Id: Ib1b971807fa89d90b10892a2d78570058e564f3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
The files were grouped into the relevant filters but the filters
themselves were not added. This now ensures the filters are added to the
vcxproj files so they appear grouped correctly.
Task-number: QTBUG-26755
Change-Id: I7d2c6fa96dcbb0496fd9d1bb1d01e7dd660052f4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
otherwise the second installation on unix would be bogus.
Change-Id: I162533ee262c6820e7e2d4710b5342cafecd9d59
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we just determined that the file does not exist, so it's entirely
pointless to query its type from the file system. consequently, the
respective fallback branch would assume a regular file anyway.
Change-Id: I42590ffc2a5f650fb430a9398cb1859217ed4350
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the value is still re-processed numerous times, end each "exit path"
does own escaping, while not every path can deal with an escaped path.
Change-Id: I0bf4a043809bf4b7877d02e5d8dfe8f794a7dd00
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
QDir::relativeFilePath() doesn't do anything if the path is already
relative, so make it absolute first to force a re-calculation.
the cleanPath() is gone, as relativeFilePath() already does that.
Change-Id: I8f4d0d839db3fe99a608f70916b4b5bd52c56535
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake -project was always outputting a project with subdirs template, because
Option::h_moc_mod was not being properly read, causing addFile() to misbehave.
Change-Id: I2c07aea132f9885eabf188de993b0fabfb352886
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the paths may be explicitly added before some other paths, so it would
be wrong to remove them.
Change-Id: I68ae93fd307afe14a07a0f24de952783950b5bea
Reviewed-by: Holger Freyther <holger+qt@freyther.de>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Remove references to an old compiler that has not been
supported for a long time. Also remove Borland specific
configuration flags which have no meaning elsewhere.
Change-Id: I3634a52b78f737ea972073e14c2b6669dcd0ae63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
sam added this based on a vague notion of backwards compatibility when
he fixed the function to use the local scope, but it kind of makes no
sense - there is very little reason for accessing the global scope from
within a function. google doesn't find any relevant hits except our
source code, so let's just nuke it.
Change-Id: Ie957bb47b531f7e9b5dfcceb4e09f65dd826b422
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no reason why private libs should not have prls resolved.
the two variables are resolved independently, so it's possible that
(even more) libraries will appear duplicated on the linker command line,
but that seems easiest for the time being.
Change-Id: I9070ba53808a0661fa72949db8111106b7aca487
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the visitor-pattern like approach is not needed any more
Change-Id: I990db681cbeee91d89ecba97745a8104595247e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's more elegant, and more similar code is better.
Change-Id: I2b8b036cb70a932fd171e23cf7d3389188401924
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it wouldn't actually *do* anything, as l is not a reference. i cannot
figure out the original intention, so let's just drop it.
Change-Id: Ic0a3457a1872cde827259ee5530959120456e934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the unix and windows variants don't rely on it.
not making it purely virtual only because the project generator inherits
MakefileGenerator as well but does not need an implementation.
Change-Id: I80099b3f5d07cd037b408cf1099c58ff3a2904cd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
i see no reason why they should deviate
Change-Id: Iaa0445b79a95d348f51df74a74c7c89216c468ec
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
given that nobody noticed so far how broken this was, this doesn't
appear to be a particularly common path. but anyway ...
Change-Id: Ic17b239d724a4d69ff414a24be2e8588732bc8dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code wouldn't actually *do* anything with them, because it was
completely broken. didn't seem to hurt, so just remove it.
we still need to parse -framework, though, so we don't do funny things
with its possible argument.
Change-Id: Ia3266538612d3314a72f4965ee9c1ea2d3046ac9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the system path separator and shell are bound to the host system
(system() will use cmd even on mingw with sh.exe in path).
the makefiles otoh may depend on what the qmakespec defines.
consequently, add $$system_path() and $$system_quote() (for use with
system() & $$system()). $$native_path() is renamed to $$shell_path() and
should be used with $$shell_quote() to produce command lines in
makefiles.
$$QMAKE_DIR_SEP needs to be applied to Option::dir_sep right after
parsing the spec, so it is available to $$shell_{path,quote}().
Change-Id: If3db4849e7f96068cf03a32348a24f3a72d6292c
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
dealing with the directories separately doesn't buy us anything. it's
easier to mix them into the libs, as that contains some paths, too, both
in projects and in prl files.
this brings the windows generators in line with the unix ones.
Change-Id: I1f58f7edd8e21d28bfabf04384bac2e315aaf446
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there doesn't appear to be a point in having the function virtual; the
part in the mingw generator can be inlined somewhere else just fine.
Change-Id: I50d66d505095b43fce601928c6240a684389a4b7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are not re-implemented anywhere
Change-Id: I444a967bb39ec6b5994747c9fa3f605b4c53ce4f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
merge their content as early as possible into QMAKE_LIBS. that's where
they ultimately end up anyway, and this approach is way simpler.
QMAKE_FRAMEWORKPATH_FLAGS is also used for the compiler flags, so it
remains as such in this second function.
Change-Id: Idc3ba4a9b2569fce3252d5f5ddc3f6ebf93650cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
findLibraries() now consistently expands to the linker-specific syntax,
and processPrlFiles() expects that syntax.
Change-Id: Ifd7b51d01378c91d6f2b132aca33629f21ca72f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Use XOR instead of OR in order to avoid saturating all bits when computing the
hash value.
Change-Id: I50b1a044eb827239dae1c04732ca6a065f6233b4
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
yet another symbian remnant (building windows arm executables for the
simulator).
This reverts commit 5c88141ed0b25d8ab9318bf4cb5dda54b90b2ce1.
Change-Id: I6eb147c0e2710eba09a4339fa4a08a5b08f8dab3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
unlike for the unix linker, this does not matter for the windows linker,
but keeping it consistent has advantages.
Change-Id: Ib9b9efa18c31d87c026d3cac5a8737f4612ad1c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
libraries and related flags have no business in that variable, by
definition.
Change-Id: Ic958a3e082a498945ab56bc12ec05d4083ee43a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
this way QMAKE_LIBS{,_PRIVATE} can be treated the same as in all other
generators, which allows us to:
- make the windows generators' findLibraries() be more like the unix
version
- dispose of QMAKE_INTERNAL_PRL_LIBS handling while reading prl files
(because the output always goes to QMAKE_LIBS)
- as a side effect, QMAKE_LIBS_PRIVATE are not subjected to prl file
resolution any more, which is again consistent with unix - the
correctness of that needs to be assessed separately.
Change-Id: Ie9bc04d117eff6a7cde846677f98acf3c64aa6ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
the function was already called long before. if it really needs to be
called again, it's a) probably affecting the other windows generators as
well and b) the actual problem should be fixed instead.
This reverts commit d50c3c6624b2343e42d0df4b72212d9ced8f3682.
Change-Id: Iaa2007640fbc9acdc50ba3b0681efeb0d184f224
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
the libinfix provides a way cleaner solution to that. i don't expect it
to be still actually used anyway.
Change-Id: I051522ec3abb3d92c529b5462b8514a706aa2ba1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
it's a tad insane to expect the user to do that
Change-Id: I75c68f2a28656c9ba2e3fabcc79718b899b29ce7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qtAddModule() skips adding standard library paths to LIBS. however, as
processPrlFiles() didn't know anything about that, it would not find the
prl files of qt libraries in these paths.
so centralize the definition of these default paths (we should actually
ask the linker for them) and use it in both places.
do the same for the include paths for symmetry.
Change-Id: I7e3692dc2d1c2d0c97a9151d15887b1263de137a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
XQMakeSpec is not available after configure
but the QMakeSpec contains the correct value
Change-Id: I6cd4da8b0d6c95565f31842c17611ffd361bc010
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
it produces way too many false positives to be useful.
Change-Id: Iefa423f96fa5574267b1468abb5efc8454ab54a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
i have no idea why that was done (the commit message says "not sure why
it works elsewhere"), but it makes no sense whatsoever, specifically
doing it only on mingw. probably some workaround, as usual. the
de-duplication is broken by design anyway.
This reverts commit 7a6302c2baf6861fdaf65992b71a7676859860c2.
Change-Id: I6edecaa062570e59eccd24d50919ba132e65a403
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Don't hardcode the "qt_config" EXTRA variable and use QMAKE_PKGCONFIG_VARIABLES instead.
This allows qmake create the .pc files that are unrelated to Qt.
Change-Id: Ic72005e8819a15f6c50f3aaf79424a247fba20af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This has been deprecated in Qt 4.8.0. Use X.files instead.
Task-number: QTBUG-3216
Task-number: QTBUG-25106
Change-Id: I581321591291118a13403e92da5997497e12c3fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
we would ignore the early read variables and fail to export the super
cache's path to the project.
Change-Id: I3c467802b4af22f73be05b25dbd8ccb6196d28a8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
refactoring and cleanup. fixes x-builds between different os families.
Conflicts:
mkspecs/features/qt.prf
Change-Id: I0205e6f07f77c9b015cf055dd87a471883949a91
QT_NODLL is replaced by QT_STATIC, but the latter is implied if
QT_BOOTSTRAPPED is already defined. Therefore, simply remove the
QT_NODLL definitions.
Change-Id: Iac7ec0b494b7a78197c25d59547f45eaf92d7465
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this function is not meant to be used for debug statements
Change-Id: I84575e64814e2c9fd2e09c33fc680d0e6648f4ea
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the rationale is mostly the same as in 568e714fdf, plus the additional
point that the qmake version didn't change for a decade.
fallback paths for version 2.01a properties are provided.
Change-Id: I3d3f16595eca9eca71c78fda9dbaf53da9f874a9
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the feature was implemented for the abld/sbs2 generators only, and is
of course undocumented.
this reverts most of commit e795e61ef93f8080f9938ac49f2fca306644af85.
Change-Id: Ibd1726b036ce6c45f8e678ea996218f774f8aed2
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it was used only for determining the path separator, so do that
directly.
the -macx option went bye bye, as it is redundant with -unix now.
Change-Id: Ib8344c042db56e05af75d263447311d4b43a3bf0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
instead of having a bunch of nested loops, collect into a temporary list
and process it at the end.
Change-Id: I97e5642f7e13f7c7b69eae00833e61cdf46a02ed
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the as-we-go dump is sufficient (and usually necessary to actually find
the problem). if only the summary is interesting, the -E option can be
used now.
Change-Id: I9e34c6db9dcb99b38013c4d0cb80b8cb88ca36b5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
instead of dumping the variables as we are going, dump everything at the
end. this is potentially useful, as opposed to the previous
functionality which was redundant with -d.
Change-Id: Icf14703cb93e03f7079dfc0266b219ad9c902133
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
values() and variables() get both const and non-const overloads
Change-Id: Idfabea1acc488bf78f24edb831681ee07f0074c4
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the weird debugging feature is not used anyway
Change-Id: I07f481a94f2b2ab2a5b61270f0e00183cefd4cd1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we can rely on only user code needing variable mapping, so apply it only
in the evaluator.
Change-Id: I6fc58e7bcf24cf0fa8783d5341ab1e7b9f001c88
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the only place where the two remaining magic values need to be
referencable is doVariableReplaceExpand(), so make a separate function
and use it only in that place.
Change-Id: I6e2fcfa3a4f16727d90ace56eb88fc99ef272ffc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
like the other variables, we can just store it in the hash.
Change-Id: I49ad39dca8d498119b27f16ea4bdc44ae698d72e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this changes the semantics a bit - it will be the datetime of qmake
startup rather than the time a particular file is processed. i'd argue
that this is insignificant.
Change-Id: I75918967bef25038ce54aa81ab03c027384c0268
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it suggests a symmetry to $$OUT_PWD which simply isn't there. the
shorter alias $$PWD is much more popular anyway.
Change-Id: Iefbfd56f1a3e526f15c9d6cd1bf59778be6f2f8d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
$$_PRO_FILE_, $$_PRO_FILE_PWD_ and $$OUT_PWD can be cleanly initialized.
no need for magic.
Change-Id: I2e339d17bae42ecb573c2f82c716f6be15a35b98
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead of resolving them on-demand, just initialize the value hash
with them. less magic and faster.
Change-Id: I28cb6c21ae6ae60a33734f62acdef0794420ba8f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a purely internal variable. projects are supposed to
query $$TEMPLATE only.
Change-Id: I32a3aa7012a4fedcf6e77e2e1302ed978baac700
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is cleaner by design and allows removing some hacks.
Change-Id: I3270195b5d62caa476ffde7c1e1ef43cec99c565
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
these are not actually used inside qmake since ever the code was factored
into moc.prf.
Change-Id: I545f4857ca3f0b4bf2439703700069ac67ad4ca2
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's really only a host setting which is not used any more past the now
removed assignment.
Change-Id: I62c61c893697eb9a7e7be550311bf152d5a8206e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
get the actual spec path directly from the project - the specs in Option
are not necessarily resolved.
Change-Id: Ia2bf2199c5269aa5b5a9d4c38de36171f25d448b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
doesn't make much of a difference on unix (as the default specs are just
symlinks).
on windows, it makes the gross hack used for finding spec-specific wince
default_post.prfs unnecessary.
Change-Id: Id403dce5be487e1ae22c1f54b8095a6afdd98bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is cleaner than resolving it on-demand, as it avoids statics (with
potential side effects on dynamic spec switching).
Change-Id: I2bc15a4c3108376e1b4a01351875fe0c445ee5d5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it's completely counterproductive. just include() the file instead.
i don't think anyone knew about this "feature", so just removing it.
as a side effect this removes the repeated existence check of already
found feature files, as we can use a clean else-if cascade.
Change-Id: I5d38d38d0a897f2e8857ac68d5649fd4367941c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.
Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
these are read before the qmakespec and before the cache, resp.
this will allow moving some hard-wired logic out of qmake.
Change-Id: I6a63050d7798bc30a4add8c009bcd801a29a0deb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this should significantly cut down the time wasted looking for files in
non-existing directories, in particular on windows.
Change-Id: I7ab3523fe8c028e3787ebc78e4543ab04f53448e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this limits references to this variable to its setup and explicit cache
manipulation.
Change-Id: I88dd2418051501abea201f223da7759a15f1c249
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it wasn't really wired, so the only effect it had was disabling the unix
scopes (despite an attempt to override that in the spec, which probably
worked before qt 4.6, and will start working again soon).
Change-Id: I95daff75b508edaf83a8a06fd327350acd62b124
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
(some of) the generators are (moderately) x-platform, so it makes no
sense to nail the host platform to a generator (and thus a spec).
overriding the host platform is only a debugging mesasure anyway, so one
can use the (now undocumented) -unix/-macx/-win32 options for that.
Change-Id: If2a059f1feeb2c726e5838625ede1c7add829985
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
they have been deprecated long enough, so we can mess with them now.
don't make them set the target mode any more; the makespec can do that
autoritatively. instead, they can be used to override the host mode for
debugging purposes.
Change-Id: Ife5fdcf4f1b6b926901a80896ac92b7d821278d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the only callers which used non-default arguments are gone now, so remove
the arguments entirely. this also enables us to re-enable result caching.
Change-Id: I62f76e17e531a4eeafddb9b29716ca0a0eb3dbea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the specs in Option are now only fixifiable absolute paths if an actual
path was passed on the command line - otherwise these are just names,
and we should pass them on verbatim.
Change-Id: I5b3535dadf2d6b2b3116331e6636f6e363a5361f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if source and build dir are direct children of the common root and we
are shadowing the top-level source dir, there is of course no trailing
slash to match.
Change-Id: I8a34a6a72d16cb21d77d056e037235af9b32a008
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The return type of isActiveConfig is a boolean, so return that when
host_build is queried.
Change-Id: I6d1420b49b09e51442c4b2d482e2f19b165081d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Integrated the checksdk tool into qmake and made
the makefiles selfcontained, so configure make, is now
enough to build qt for wince
Change-Id: I29076702eca2ec23d4d06bb3d5c5cef9d4f95161
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.
on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.
it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).
Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
instead of hard-coding platform differences, use a variable.
Change-Id: I20e98811ad5f07429148c6f88aedbabc3ba58fff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.
Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
no point in entering the outdir and leaving the indir.
this doesn't really matter except for the obsolete borland generator,
but whatever.
Change-Id: Ieb4e4c549ebd65f99e4d00819c52822968b060a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code above already deals with the differences
Change-Id: Ifb799e46f5187e7bd3d0f0169e868ad267bcfe23
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
no need to define an obscure variable for it. just inline it.
the assignments are left in for compatibility with hand-written commands.
Change-Id: I9bc3914e2c4116f3b8fe00a421ca0f036bb7e214
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
so far it would rebuild the makefiles one level down only, which is
somewhat arbitrary and not really helpful.
Change-Id: I5fe01f379ecc4b210610a674d7df7dfc18131eef
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that's consistent with other projects. 'qmake_all' can be used for
recursion.
Change-Id: Ie6d620f7a3e0e28d3f2f82f01ca94c2f46137c68
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
$(MAKEFILE) is our own file, and using it would wreak havoc if it was
named anything but Makefile.
Change-Id: I51cae2014a85399b409f18788f864ff2a82e493e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if a "subdir" project added a project file from the same directory as
itself, "/." would be appended to the path, which is obviously not useful.
Change-Id: Ia733dedb57e568c5cf9a3d5eb29727176a5142c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
webkit does some unholy tricks with the ordering of qmake and make
invocations, so it does not work with qmake -r. to make it still
possible to integrate it into the qt5 aggregator project, give it a
chance to "break out" from the recursion.
Change-Id: I926836e44c0e0790cdd90e6b0c8f766dccc33c4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
otherwise a cache/config in an aggregator project may unduly hide the
mkspecs/ of the aggregated project from qmake's view.
Change-Id: Idb0b124de071822f8f55463d9f8a4d194ef3130e
qmake will now look for .qmake.super, just like it looks for .qmake.cache,
and the cache() function has a mode to write this super cache.
this allows the creation of aggregator projects like, say, qt5.
a notable difference to the normal cache is that this file is *not* added
as a dependency of the Makefile. this means that modifications done by
later sub-projects will not cause a re-processing of earlier projects, and
consequently that one should be cautious regarding what information to
store there.
another notable difference is that this file is read *before* the spec,
so the spec can use the variables from the cache without resorting to
$$fromfile() & co.
Change-Id: I4807b6d34014261fa9eebd6f0ae128b802d86691
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.
Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.
Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.
Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.
as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.
Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
returns the list with the order of the elements reversed.
one can easily implement this with existing functions, but this is way
faster and more readable.
Change-Id: I12d306eb9fe58fc332622274ea6b658192529491
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
to be used in system() calls and when assembling EXTRA_COMPILER and
INSTALLS .commands by hand.
Change-Id: Id706cd56aa267a9fb4b14e3416692b4716fafa5b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
just exposes QDir::fooFilePath() wrapped into QDir::cleanPath()
Change-Id: I7a7644084825fd8092a9910ac20f695c4d9351f6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
more or less QDir::toNativeSeparators(QDir::cleanPath())
Change-Id: I52deee1e8086559eda5833b387a0cf64d21cbcd9
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
return the build directory corresponding to a given source directory.
this is the identity function if not shadow-building. if input lies
outside the source directory, return empty value.
Change-Id: I2d2a6b1112bd19989fe29cfe19a12d39a0d208c1
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
