Which is actually the name Lars wanted i just forgot to fix it everywhere
Change-Id: Iaa190da6c17d0a423c34202c986d69feec01af96
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Start on removing platform-specific code from QtWidgets.
Change-Id: Ic2163a0ce6f2db2151cdf7ca93766b2d861eeb55
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Introduce QTRY_VERIFY_WITH_TIMEOUT and QTRY_COMPARE_WITH_TIMEOUT
to be able to specify a timeout value.
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: Iaeaa4938eb14f2c431537055f626510cba183ce3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Preparing the introduction of a change that uses the actual
QScreen resolution in the style helper.
Change-Id: I3fbb36b0d6a34904c875a2e3684d73124f534bed
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Bring back code that was accidentally removed.
Change-Id: Ie1a4d22caa206bc8bb8e678879935e79009e9622
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
These threads are actually counterproductive, as generally speaking, processing
watches is not that expensive an operation, so instead, they process at full
speed and can (in the case of slow processing in the thread processing the
events) stack up and consume resources for no good reason.
Threads also have an additional resource consumption per engine (some ~8mb of
thread stack on Linux), so doing away with them is nice.
A side effect of this change is that events are now effectively rate-limited by
the eventloop speed of the thread they run in, so if your thread runs too slow,
and you recieve a lot of events, on some platforms, events may be dropped now
where in the past, they would be read by the monitor thread and turned into Qt
signals (thus not visibly showing as a problem, apart from invisibly bloating
memory usage).
Task-number: QTBUG-20028
Change-Id: I345a56a8c709f6f778ca9a0b55b57c05229ba477
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
this should make the evaluator quite a lot faster. the total win for
qtbase/src is only 6%, though.
i made some effort to avoid that output files get randomized. however, i
didn't bother to keep debug output sorted.
Change-Id: Id9cef4674c0153c11ebbb65cb63bf8c229eb56e3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Avoids conflict with macro on Mac OS.
Change-Id: I3426c2dc514240d80996d823b7a552c13a09f99e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Mac OSX has a check macro in /usr/include/AssertMacros.h which can
conflict with this API if used together.
http://boost.2283326.n4.nabble.com/Boost-with-Darwin-Mac-gcc-4-0-1-td2580330.html
Change-Id: I93ddd08fa2b51b198bbc02ce501d79ed97a32c34
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change-Id: I4001fcabc67e5b46465b3c9111c33247c52e5788
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
They are nothing more than wrappers around the Win32 API, and marked
for removable in Qt 5.
Change-Id: Iaf34d463488feb7840185c7b46f65a031232e34a
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Make all Qt::PreciseTimers and timers with intervals < 20ms use
Multimedia timers for maximum accuracy. Qt::CoarseTimers and
Qt::VeryCoarseTimers use normal Windows timers, with
Qt::VeryCoarseTimers having their interval rounded to the nearest
full second.
Note that the Windows timer implementation does not attempt to align
timers and reduce CPU wakeups like the UNIX implementation does. This
might be done in the future, though. However, this change does the
best we can do now, keeping most timers working as-is, while allowing
explicit use of Multimedia timers via Qt::PreciseTimer.
Change-Id: I1898272b101c572a2a9b9454fef27a651eb178f5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is consistent with the rest of the API of QAbstractItemModel
(which is virtual) and removes the need for code like this
in the constructor (where it doesn't belong):
QHash<int, QByteArray> myRoleNames = roleNames();
myRoleNames.insert(Qt::UserRole + 1, "myCustomRole");
setRoleNames(myRoleNames);
in favor of
MyModel::roleNames() const {
QHash<int, QByteArray> myRoleNames = QAbstractItemModel::roleNames();
myRoleNames.insert(Qt::UserRole + 1, "myCustomRole");
return myRoleNames;
}
which is consistent with all other QAIM API (eg, flags()).
This is a source compatible change.
Change-Id: I7e1ce17f8dab2292c4c7b6dbd3c09ec71b5c793b
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Marius Bugge Monsen <marius@cutehacks.com>
New implementation fixes some commented code marked as FIXME.
Change-Id: If8f5bebedd65bcf8f839d804c2022ca79ef82ddf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt key codes match the unicode character in upper case format.
Change-Id: I92b43463921e71f2607e569ba7ee23d6f844c50a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
We would like to add more flags that will be over the 32 bit boundary.
On Windows enums don't seem to digest values >32 bit.
This patch changes the state flags to be a bit field instead.
The windows part of the patch was written by Jan-Arve Sæther.
Change-Id: I2d1d87807f920ce4d4a5c7bfea8b1122ed44eb08
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
The previous change missed some headers from years prior to 2011, and a
few new files were merged after the previous change.
Change-Id: Ib7d1a2b7062228c2a5373da64242b2ee1f0981e1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The custom QTRY_VERIFY macro is needed since the one provided by testlib does
not support custom timeout.
Change-Id: I12bbc5efcb16c4f53514ad738d6115d217a55b05
Reviewed-by: Alex <alex.blasche@nokia.com>
It's only used by Maemo and Harmattan, thus not needed in Qt5.
Change-Id: I8638f4fc63637be88d1aa584cde7e3a4116f2de6
Reviewed-by: Alex <alex.blasche@nokia.com>
Changed selftests unittest to use specific classes of QtCore instead of
pulling in all of QtCore headers by using include <QtCore>
- Decreasing build time.
Change-Id: Ic53a70423ecafeb342cc05ae6d7dee795533d205
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reinstate a check that was presumably disabled because it wasn't
checking for the right expected date. At present pressing Enter in a
QDateTimeEdit without changing the date still emits the dataChanged()
signal. By reinstating the test, we ensure that the behaviour can't
change by accident.
Change-Id: I1b766af6ced001a4191606247338dbc91049cb8d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The created entity node's reference count needs to be decremented to 0
before it is added as a child, because appendChild will increment the
reference count to correct value of 1. Re-enabled commented-out test data
tst_QDom::setContent to exercise the code path with the leak.
Change-Id: Ieb015d68ba9bbb3f20dd47e76835ad15abb1738e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We can't assert that QMetaType helper arrays are initialized. In rare
situations it may happen that QMetaType compiled without support for an
external type (without compiled Gui or Widgets libraries) will be asked
for additional information for the type.
For example (assuming Qt is compiled with --no-gui):
// typeId it may be received over network (QMetaType::QImage)
void *ptr = QMetaType::create(typeId);
Change-Id: I018a59b23def35c7574e7c921019b5db4f06e800
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Changed qprocess unittest to use specific classes of QtCore instead of
pulling in all of QtCore headers by using include <QtCore>
- Decreasing build time.
Change-Id: Ifc7911548e4a9323726093ac1d35e4ce38b5f8ad
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This is consistent with the other socket classes.
Also see commit bf7f170607.
Change-Id: Ic4bf01bd4abf778e21fe575c5304f86c9bee82fc
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qget is a simplistic, limited clone of the wget application which
is implemented over QNetworkAccessManager.
The intended usage is for testing against other webserver configurations
than the one used on the qt test server, and reproduction of bug reports
without requiring a full webkit build (or complex user application).
Change-Id: Idcd91e2a2699dcfe19543ec9bf41aad8ccf514e0
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Before the selection of cells NW of anchor showed some defects where
cells would not be selected as the user expects
Change-Id: Ia2b63f11b8d534e918ffb97b76339d60f1ca0389
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
