We don't load and save pointers usually because the pointer value cannot
be guaranteed to remain across program invocations. However, nullptr is
an exception: a null pointer is always a null pointer.
We don't actually have to read or write anything: there's only one value
possible for a std::nullptr_t and it is nullptr.
[ChangeLog][Important Behavior Changes] A QVariant containing a
std::nullptr_t is now streamable to/from QDataStream.
Task-number: QTBUG-59391
Change-Id: Iae839f6a131a4f0784bffffd14aa374f6475d283
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
By adding std::move where it makes sense.
This is not only good for move-only types, but for any type which
can be moved as it saves copies of the return value in any case.
[ChangeLog][moc] Move-only types are now supported as return types
of signals and slots.
Change-Id: Idc9453af993e7574a6bddd4a87210eddd3da48a9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Commit fb376e0fcc removed an array that
facilitated returning the names of built-in types, to avoid the jump tables
from the switch statement. This commit brings it back but makes the array a
compile-time constant string offset table.
The array is created by way of a set of C++11 constexpr functions, so we
require that compiler feature. I've tested that MSVC 2015 does support
it as well as the ICC 17 when masquerading as MSVC 2015, so I've enabled
for that too. The only compiler left out is MSVC 2013.
If we didn't need to support MSVC 2015, this could have been written
more simply with C++14 relaxed constexpr.
This also adds unit tests to confirm that QMetaType::typeName() does
return null when we said it would. We're testing QMetaType::User-1
(which we'll likely never use) and QMetaType::LastWidgetsType-1 to
select something inside the range of the built-in types.
Task-number: QTBUG-58851
Change-Id: I4139d5f93dcb4b429ae9fffd14a33982891e2ac1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58713
Change-Id: Ie6e6a69b8ea625e3a3102c88d52f1f0fbec242aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At 200 ms, the error on first firing could be 10 ms.
Task-number: QTBUG-58519
Change-Id: Ifaee7464122d402991b6fffd14a02a4ce782f11f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
There was a test that tested this, but was wrong.
[ChangeLog][QtCore][QVariant] Fixed a bug that caused wrong results for
comparisons of QVariants containing either NaN or infinite numbers.
Task-number: QTBUG-56073
Change-Id: I33dc971f005a4848bb8ffffd1475d29d00dd1b7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under certain circumstances, VS2015 reported ambiguous options in using
the operator>(Enum,int) operator. This change adds a static_cast<qint64>
to remove any ambiguity. In the process of testing this change, a gap
in the existing logic was identified: the handling (just in the test
code) of large negative enum values. Consequently, and additional
test case was added, and additional if-conditions were added to account
for that case.
Change-Id: Ife2c471ba4caa4b9a0107722042114e58145c4d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore] QCoreApplication::applicationVersion now defaults to
an appropriate platform-specific value. On Windows, it defaults to the
PRODUCTVERSION parameter of the VERSIONINFO resource for classic desktop
apps, and the version attribute of the application package manifest for
Univeral Windows Platform apps. On Apple Platforms (macOS, iOS, tvOS,
watchOS), it defaults to the CFBundleVersion property of the information
property list (Info.plist) file. On Android, it defaults to the
android:versionName attribute of the AndroidManifest.xml manifest
element. On other platforms, the default remains an empty string.
Task-number: QTBUG-57715
Change-Id: I26f83dd00737e06f4321cf962aa5fab8398104ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The prior test deemed there to be narrowing if source and destination
integral-or-enum types didn't have the same signedness; but all values
of an unsigned source type can be represented in a larger signed
destination type, so there is no narrowing in this case.
Updated QObject test-case to match.
Change-Id: I517a5997adcad70e185d7469a8d26788e463cb75
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since the macro is now just a wrapper for std::is_enum,
its use is also deprecated.
[ChangeLog][QtCore][Global] Q_IS_ENUM is deprecated.
Use std::is_enum<>::value instead.
Change-Id: I09b9f4559c02c81f338cace927873318f2acafde
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apparently, the CI can run something over 1000x slower than on my
machine. We're getting over 100 ms delays in operations that shouldn't
have taken more than half a millisecond. The last report was of 136%
over budget, so I multiplied the resolution by 4.
Change-Id: I9093948278414644a416fffd1474406967b2a6ee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
violate a principal design rule of <chrono>, namely that non-
narrowing conversions are implicit, but narrowing conversions
need duration_cast. By accepting any duration, we allow non-
sensical code such as
QTimer::singleShot(10us, ...)
to compile, which is misleading, since it's actually a zero-
timeout timer.
Overloading a non-template with a template also has adverse
effects: it breaks qOverload().
Fix by replacing the function templates with functions that
just take std::chrono::milliseconds. This way, benign code
such as
QTimer::singleShot(10s, ...)
QTimer::singleShot(10min, ...)
QTimer::singleShot(1h, ...)
work as expected, but attempts to use sub-millisecond
resolution fails to compile / needs an explicit user-
provided duration_cast.
To allow future extension to more precise timers, forcibly
inline the functions, so they don't partake in the ABI of the
class and we can later support sub-millisecond resolution by
simply taking micro- or nano- instead of milliseconds.
Change-Id: I12c9a98bdabefcd8ec18a9eb09f87ad908d889de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By using _MIN for signed values, and _MAX for unsigned values, we may
detect conversion issues when serializing QVariants using QSettings.
Change-Id: I3ce58ba4b93f791f75c7ae44d1fd5030f07b2f25
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix is trivial, but the patch adds a new QSettings tests that iterates most
of the QMetaTypes and verifies that storing and retrieving them again gives the
same value. This is a more complete test than the testVariantTypes tests, which
is limited to a subset of the QVariant types. The new tests borrows logic from
the QMetaType test machinery.
QSettings has been Q_ENUM'ified in the process, for improved debug output.
Note that on backends such as the INI backend, the metatype of the QVariant read
from the settings will be a string, so it won't match the input QVariant type,
but the result of converting that to the original value type should still work.
Task-number: QTBUG-56124
Change-Id: Ib03a26abf77c9fb449b94160d28bc4baeb095f25
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
A check "just in case" -- we don't want leaks nor crashes
due to double deletions, and so on.
Change-Id: I24f1a486f0d438595bbe352ab780b07c5d53acbd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It makes very little sense that one needs to have a debug build
of Qt to debug QObject issues in application code. At this date
we don't even offer debug builds for Linux systems, and anyhow
one might want to debug an application running against a
release build of Qt.
[ChangeLog][QtCore][QObject] QObject::dumpObjectInfo and
QObject::dumpObjectTree are now fully functional even in a non-debug
build of Qt.
Change-Id: Ifddd3023ffc82f3dc3928a7a94d4970e2fb1b44a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These tests use helpers, which are not supported on UIKit platforms.
Change-Id: I51447754dba2cd2547be05c3767e4ff3b6b5a671
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's like QElapsedTimer, but marks a time in the future instead.
[ChangeLog][QtCore] Added QDeadlineTimer, a counterpart to
QElapsedTimer, used to mark a time point in the future (a deadline) and
determine whether such a deadline has passed.
Change-Id: Ifea6e497f11a461db432ffff144921f7fbc1d1d3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As it were, QStringLists were not handled explicitly when comparing
QVariants. If both QStringLists contained only a single entry, they
were treated as QStrings - if both QStringLists were empty, there were
equal (correctly so) - but if one of the QStringLists had more than
one entry, the compare function fell through to returning always 1.
As discussed here: https://stackoverflow.com/a/38492467/3444217
Added rich comparison tests for all non-numerical, non-recursive
QVariants that support them (except QModelIndex and
QPersistentModelIndex)
Task-number: QTBUG-54893
Change-Id: Icc5480d9ba056ee5efe83da566c5829caa1509d7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
One of the good features of the new connection style is that
implicit conversion is performed for the connection arguments.
However, this is also a bad feature when it comes to the old
C remnants in the C++ language: for instance, doubles implicitly
convert to ints, possibly losing precision (and GCC/Clang do not
even warn about those under -Wall, only MSVC does) or even
triggering undefined behavior.
For this reason, when using braced initialization, C++11
disables narrowing conversions or floating/integral conversions.
Use this feature when checking the arguments of a PMF-style
signal/slot connection. Technically this makes the program
ill-formed, however GCC still accepts it (but at least
warns under -Wall).
Hence, add a way to disable these implicit conversions.
This is a opt-in and guarded by a macro, as it's a source
incompatible change.
[ChangeLog][QtCore][QObject] The
QT_NO_NARROWING_CONVERSIONS_IN_CONNECT macro has been added.
When using the new connection syntax (PMF-based) this macro
makes it illegal to narrow the arguments carried by the signal,
and/or to perform floating point to integral implicit
conversions on them. When the macro is defined,
depending on your compiler a QObject::connect() statement
triggering such conversions will now fail to compile.
Change-Id: Ie17eb3e66ce0cd780138e60d8bb7da815a4ada83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In all other forms of disconnecting this is done. We also know the
signal index, so there is no reason not to do this.
Change-Id: Ic8b042cd8f45dbff74b42ee30c384a84bef78b20
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
