- Don't run this test in parallel
- Remove redundant QT=-gui
- Place the insignificant_test marks together
Change-Id: I078fa29a4dccef9af8798792d06d51835b4b8934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add an encrypted signal to QNAM and QNetworkReply to allow applications
to perform additional checks on the certificate chain beyond those done
as part of the standard SSL validation. This allows things like
certificate change notification to be implemented for QNAM as they can
be for QSSLSocket currently.
Change-Id: I693e3e6fec8b7040379b7e7f1f819550e6b2617f
Reviewed-by: Peter Hartmann <phartmann@rim.com>
The "mediumfile" is actually 9.6 MB large, and makes the test slow and
even fail on mobile platforms.
Change-Id: I694d9d38e4d09c8e90a03c1141320fe2a757fdd9
Reviewed-by: Richard J. Moore <rich@kde.org>
This improves performance since a network round trip can be avoided.
Change-Id: I1aaff7e48ef9638cb137de0f43942c3a4dd2884a
Initial-patch-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Adds an auto test that verifies that the replies to POST and PUT
requests are not cached even though they contain a max-age header and
that subsequent GET requests are reloaded from the server.
Change-Id: I188ae1200cb5551e164722c0f479719be8d11bfb
Reviewed-by: Peter Hartmann <phartmann@rim.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifdce72af844901665c4ebab11507216ba5f00fc1
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
"HTTP/1.1 100 CONTINUE\r\n"
If the header from a server is splitted between two packets
the first packet contains "HTTP/1.1 100" and the second one
contains " CONTINUE\r\n", one space (0x20) is skipped. After
processing the line looks in this way "HTTP/1.1 100CONTINUE".
QHttpNetworkReplyPrivate::readStatus(QAbstractSocket *socket)
is called twice, if a http header is splitted as above.
The function always removes whitespace from the beginning of a packet,
even if it is the second part of a http header.
QHttpNetworkReply returns QNetworkReply::RemoteHostClosedError
due to damaged http header during processing.
Improvement of unit test.
Task-number: QTBUG-27161
Change-Id: Ifc2949f62473209b4032185effbf5078b4130cda
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Changing it outside of the test function definition to avoid running
empty/inapplicable test functions.
Change-Id: I713560cde7f715696984ed082d682900f5f1bcdd
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
We need to handle FD_CLOSE separately on Windows as this will be sent
only once. When we get FD_CLOSE we need to check if there is more data
available for reading. It there is this might indicate that there is
another FD_READ that we need to handle after the FD_CLOSE. So in this
case we will manually create another close event.
Task-number: QTBUG-19409
Task-number: QTBUG-25386
Change-Id: Ie19906bc3f64fb6a85a508a5ab12caac5d70ccdb
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Using the nullary version has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything. So I've added the macro where it
was missing, or moved it to a central place when it existed
hidden.
In tst_qnetworkreply, this became a bit tricky, because a private
header is conditionally included, so moved the Q_DECLARE_METATYPE()
into a conditional section, too.
Change-Id: I71484523e4277f4697b7d4b2ddc3505375162727
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
On windows without ssl there was a disconnect on sslError signal
that was not wrapped in ifdef.
Change-Id: I9b1327adfa853d4dc8f1d8a0120f8f0ed7c13e9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Two cookies in a single Set-Cookie header are no longer allowed.
Check that this header is parsed according to RFC6265 rules instead
Change-Id: Ice48bbe78a9886208f7d1186cf1d8c37f46f1252
Reviewed-by: Richard J. Moore <rich@kde.org>
The existing autotest was made invalid by the downloadProgress
signal choking patch.
Rewrote the autotest to download files from the test server
with some rate limiting applied to ensure more than one signal
is emitted.
Change-Id: I6026bacdf356b4e1796b80f6983e5bdce0d1bfce
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The QNetworkReply::uploadProgress signal is intended for updating UI
elements such as a progress bar.
Limit the signal emissions to 10 per second to prevent overloading
the UI with updates.
As with the downloadProgress choke, this is implemented by dropping
signals that occur within 100ms of the previous emission.
The 100% signal is always emitted (bytesSent == bytesTotal)
When the upload size is initially unknown, this behaviour is still
provided by the upload device emitting a suitable readProgress
signal when EOF is reached.
Task-number: QTBUG-20449
Change-Id: I77e03c8a49109106e1c375ee00380293fd326b63
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
We'd like to decrease the default timeout for tests in the Qt Project CI
so that we waste less time waiting for hanging tests.
Tests which genuinely take a long time to run, such as these, should
have their timeout explicitly set in their .pro file.
Change-Id: I4fe6249e9efa764b230251d73a1115c24411e168
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Ensure we always use a unique filename when writing to test files.
The test already contained code for this, but it was not applied in a
couple of places.
Change-Id: I1e29ee162c390e014688ab46e3658e2a463d203e
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
In tests when IPv6 is not present QSKIP IPv6 tests.
Task-number: QTBUG-23660
Change-Id: I02abc7322d765a93cbf661e53c76257f03dca73e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This can be enabled again now. The sender transfer test is still not
re-enabled since the test would take to long to run if sending
enough data to overwhelm the reciever's kernel buffers.
Change-Id: I4056fdca53ec8ebbcc53dfdc814d8bfdbc73f7ce
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
After we have change the policy we should set the readbuffersize to
unlimited again, so that we try to download all data.
Change-Id: I1b9bdb6c2e5f408c920f6e6d7e85a39e4c18316b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: I94cc301ea75cc689bcb6e2d417120cf14e36808d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If we're not going to verify the peer, or we know in advance that
windows won't have a CA root then don't ask it to verify the
certificate chain.
The test case started failing in CI when the windows cert fetcher
was integrated due to timing change. I've relaxed the timing
requirement of the test to avoid it being unstable.
Task-number: QTBUG-24827
Change-Id: I694f193f7d96962667f00aa01b9483b326e3e054
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Workaround QTBUG-24451 by retrying creation of SocketPair if it fails
(waitForConnected and waitForNewConnection are used in the factory
function).
Skip very unstable test cases due to QTBUG-25386
Change-Id: I32129922329b895eb3719d61719c487a4d52c466
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ConnectInBackground should be set when opening a network session
due to a background request. This test checks that.
Unfortunately, none of the bearer plugins currently in Qt Base support
this attribute, so the test result is inconclusive.
(testing with a debugger shows the attribute is set correctly, but
it can't be read back as the set is discarded by the plugin
implementation)
Change-Id: Idcf777fe489a62d4ff5007ffd291a84ba052311b
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Using the policy change signal from QNetworkSession.
If the new policy disallows background requests and this is a
background request, then generate an error.
This results in a TCP RST on the socket, and a
BackgroundRequestNotAllowedError on the QNetworkReply.
If the reply is already finished, no action is taken.
Change-Id: I4ff5c681a8b7b852727bb95f03664d666f4efe07
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Ftp and Http have different implementations of QNetworkReply,
so test both of them.
Change-Id: If502fa1788110edf89e619966534eea08830a19b
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
When FTP login fails we fail to remove the entry from the cache.
This is because the cache key is created from the url with the
userInfo. So this needs to be set again to match the key used
when inserted.
Task-number: QTBUG-11824
Change-Id: Ib3fd2d737581653ae59c56d0810d42e2d8dc2176
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The use of any broken-down components of the query now needs
QUrlQuery.
The QUrl constructor and toString() are now rehabilitated and the
preferred forms. Use toEncoded() and fromEncoded() now only when we
need to store data in a QByteArray or the data comes from a QByteArray
anyway. Change to toString() or the constructor if the data was in a
QString.
Change-Id: I9d761a628bef9c70185a48e927a61779a1642342
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSharedPointer isn't meant to be used as a
base class.
Instead of inheriting from it to add implicit
conversions to and from QNetworkReply*, make
QNetworkReplyPtr a typedef, overload two
oft-used functions to take a QNetworkReplyPtr
in addition to QNetworkReply*, and otherwise
make the conversions explicit.
Change-Id: I1eff1793a19f2d5bad1cce8de74c0786675a50f3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
It's unstable on all platforms, because the reply can be finished
due to a race with the http thread. It isn't crashing (which the
test was trying to test for), but rather the QVERIFY(!reply->isFinished())
fails, which is an inconclusive verdict.
Change-Id: Ib815a7cedd220544a0c9cb83023e3334df4a0fb3
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The metatypes are registered in the constructor, don't need to
register them in test cases as well.
Registering in a test case is bad practice, as it could result
in tests failing when run individually due to unknown metatype.
Change-Id: Ic4d65d0f5fe3cdd3ab57cf2512a4906d71205a05
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
The test case that depends on QLocalSocket consistently fails due
to bugs in QLocalSocket windows implementation
Change-Id: Ibfe9eb3590be4f72b52f14cd4fbe5be61f6cf70e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The test was testing the wrong thing, and passing even though
QNetworkRequest::AuthenticationReuseAttribute was not being
respected, until recently when I fixed username/password in URLs
Now the cache is properly bypassed when this attribute is set to
manual, and the autotest is updated to check this.
Change-Id: I87943515562d0b16b03504f0758ba265758d1c22
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Expiration date is calculated from max-age header when a response is
inserted into the cache. Because the test case is prepopulating the
cache outside of QNAM's control, the expiration date was uninitialised,
causing the test to fail.
This is due to a 2 year old change in QNAM, where max age calculation was
removed from cache retrieval, and more recent changes to QDateTime
where secsTo() returns 0 if one of the arguments is invalid.
Change-Id: Ieecd46123dde4ca0fd0be3ae79e70e1528ec02bc
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
