Commit 0f1b6acab7 added the detection, but
not the reporting in configure's output. This change makes them be
reported alongside F16C.
Change-Id: I27b55fdf514247549455fffd14b1711ca47b1d9a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The configure-time detection (cxx11default) isn't enough if the compiler
can be changed. This is especially necessary if Qt is compiled with a
compiler that defaults to >= C++11 (e.g., GCC 6) and then the user
selects a compiler another compiler (e.g., Clang) via -spec option. In
that case, we'd miss adding the -std=c++11 or -std=gnu++11 option to the
command-line, causing the compilation to fail.
As a nice side-effect, even moc without moc_predefs.h will now get the
__cplusplus setting.
Task-number: QTBUG-58321
Change-Id: I74966ed02f674a7295f8fffd14a8be35da9640e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
the outdated ones remain for backwards compatibility; some remain
unchanged.
Task-number: QTBUG-30083
Change-Id: Ia596b854d26b00fcb4f48df0da7ad893650ac1c8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The AES instructions were first introduced with the Westmere shrink
(22nm) of the Nehalem architecture. The SHA instructions are still
pending on Intel architecture, but is available on AMD family 17h (gcc
argument -march=znver1).
Both features operate on SSE registers, so that's why the MSVC command-
line argument is the SSE2 one and the configure-time tests depend on
features.sse2.
The qmake feature names end in "ni" because "aes" and "sha" are too
simple and could clash with other uses. The QT_COMPILER_SUPPORTS_ macro
doesn't have the "NI" suffix because it has to match the GCC/Clang
predefined macro.
Change-Id: I445bb15619f6401494e8fffd149dbd1f862ff51c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The "accessibility" feature was defined globally for qtbase, but also
in src/gui. The definitions could end up with different values.
Change-Id: I1a932c3c04a5fc26b9f67eb4f5ff02e524f380e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use F16C or ARM FP16 if available at compile time.
Configure check added because older clang compilers have F16C defines
and flags but not all the intrinsics.
Change-Id: I71f358b8fd003e70ab8fcf35097414591e485112
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The minimum version of Xcode that we support is 5.1 (based on Clang 3.4)
Change-Id: I536c32a88bff44dab37afffd14a11f709fb25169
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
don't fail to set up cross_compile early enough. otherwise, we'd
populate the cache for target builds with data for the host.
amends 6b8666c7 and 5060740f.
conversely, pass on extra flags to configure tests when not cross
building.
amends d8be8110 (and 2c5eb3e6).
Task-number: QTBUG-58556
Change-Id: I531d71e06204a0b17ae6dabf017a52e0f2efd9a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Alloca() is not supported on all platforms, like
INTEGRITY on ARM, so adding a configure check for it.
This can be used when building QtQml and 3rd party
code, in particular PCRE2 and SQLite.
Change-Id: I9785e16c21f67d1a68fef567e18c3356170f027e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The patch fixes a number of bugs in code, and removes dead logic
clarifying that MIPS DSP, like ARM NEON, has no runtime detecton.
Change-Id: If2f4eea68da5b2eaa80b8e9c8258206d8c1b7173
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Enables optimizing with -Og if GCC has the option available, this
should produce faster debug binaries without compromising debugability.
Is a privateConfig to limit it to the default Qt build.
Includes two fixes for false positives of maybe_uninitialized triggered
by -Og on gcc 4.9.
Change-Id: I466d7a4070295714189024369312e6cbd36cfacf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It only applied to Windows (not MSVC, like the help said) and the build
was broken with this option. So remove it, as we clearly never test
this.
[ChangeLog][Windows] The -no-rtti configure option was removed, as Qt
5.8 fails to build under that condition. To disable RTTI on user code,
add to your .pro file: CONFIG += rtti_off.
Change-Id: I2bc52f3c7a574209b213fffd149aae1b8d0cf9df
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... so other modules (qtwebengine) can query it in a modular build.
Change-Id: I849947339e91db44be9280ead75fb423c62957e3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Initial support for INTEGRITY to build QtBase
Change-Id: I18f36b4dea9107f01e1c281e4b62880590c777a1
Reviewed-by: Tuukka Turunen <tuukka.turunen@theqtcompany.com>
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Risto Avila <risto.avila@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
turns out that just appending builtin-qt.conf isn't a good idea:
executable-editing tools (objcopy, prelink, etc.) will happily drop the
"attachment".
a safe method would be adding a proper section to the executable, but
there doesn't appear to be an objcopy equivalent in msvc, and using
entirely different methods of embedding the file with different
toolchains seems like a rather bad idea.
so instead go back to the old method of building qmake with a generated
qconfig.cpp. of course, as said file is now created by qmake itself, we
have to compile qlibraryinfo.cpp a second time, and link a second qmake
executable.
Task-number: QTBUG-57803
Change-Id: I9e232693550aa870cec154e49cc06add13017cc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... so that we can turn it off if we don't want to build it.
Change-Id: Ia330dfa1477bcd2dc8e24eb55400e100fca156b5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... so that we can turn it off if we don't want to build it.
Change-Id: Ib27386da4754d843d4e4cbb05f9542852efefb88
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This way we can disable it by passing -no-feature-sql to configure.
Change-Id: Ia47d72101de0788478997fa1854cedcd1742f6fd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This way you can disable support for QtNetwork by specifying
-no-feature-network on the configure line.
Change-Id: I46217ccc525a9e2c85394ed4eb6db0e2b60b6d86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this makes it consistent with the determination of the default
include/library paths. this makes sense, as it's possible to switch the
sdk/toolchain after building qt (within reason).
a side effect of this change is that for compilers which emulate other
compilers, both the real and the emulated version are now made
available.
Change-Id: Icfcc672c0d2e3d1b5e622993c366063d70ad327c
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
detecting the machine tuple must happen before committing qdevice.pri.
Change-Id: Ic37eda42fff805d6e1edb5dd92898abd59d6bdc9
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
this fixes the x-build for raspberry pi, as that spec refers to the
sysroot.
the path setup doesn't require the device options to be in effect yet,
so it was sufficient to move the existing spec reload to a later point
in time.
Change-Id: Idc521aa13ff441931e954c7c9004472cf7061ee1
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QtWebEngine requires this in order to disable code that is not allowed
on the Mac App Store. The option is too generic to go directly into
QtWebEngine however, as it can be used to toggle additional features in
qtbase as well as on platforms other than macOS.
Change-Id: I556298f4b654a8904c33002ef097a75e2e38938e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
we pull this feat off by booting configure with a dummy spec. the proper
spec gets loaded subsequently.
note that it was necessary to move the cache loading after processing
the early checks (from which the spec handling is triggered). this is
just fine, as the cache is needed only by tests, which are forbidden at
this stage by definition.
Change-Id: I5120e25a8bf05fb8cc5485fd93cf6387301089aa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
in its current form, it was introduced only in 5.7, mostly as a side
effect of -external-hostbindir (which is now handled differently).
it only ever worked for the macOS and MinGW specs, as a side effect of
them supporting -sdk and -device-option (for good reasons), and was
supported only by the unix configure. it's not believed to be really
useful and complicates matters somewhat, so get rid of it again.
should it ever become actually relevant, it can be re-introduced
properly, probably along with a -host-sdk option for macOS.
Change-Id: Ib078469ea39deb821c7b6a8c67fda9e1a95fedf5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... where it actually belongs, as it should work in each repo in a
modular build.
Change-Id: I5463f0bcacb239900bed0b0f7be9cf32a3eab04e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this also removes the need for passing pre-processed options via
configure.cfg, so get rid of that.
a somewhat unfortunate side effect is that the android-style-assets
feature had to move back to the top level, as the licensing options
depend on it.
Started-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Id4d1e0ba18b3e3104400293b8f0c7f2f65e68dea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
amends aa3d08ee86, which attempted to
revert the default change to -shared in 4c26b48633 but failed to take
into account an explicitly passed -shared argument, resulting in:
ERROR: Feature 'shared' was enabled, but the pre-condition
'!config.uikit && !config.integrity' failed.
Change-Id: Ide381624245e7c132a07e98c9107be7126dd488a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is a revert of the default change to -shared in 4c26b48633,
which was landed without dependent changes like
https://codereview.qt-project.org/#/c/160747/ being landed first,
breaking the build for people building with the default configure
arguments.
Change-Id: I66eba76ca681ccf9b2ee54fa16b3e08888ae2fb4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
this option makes sense only when the default build is debug (regardless
of whether the release build is also enabled), as it overrides the
default.
Change-Id: I29f87430242a7d8239f13f0b33f6eebe098d9cf7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this is much more intuitive, and actually produces a sensible result
with configure -recheck after a compiler upgrade.
Change-Id: Icfa0b85377d9fc014e66490c8ebf6c9236df978e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of forcing a static build, configure now respects the
-shared flag and defaults to that.
[ChangeLog][Important Behavior Changes] Qt for iOS now respects the
-shared configure flag, and now defaults to this configuration as with
all other platforms.
Task-number: QTBUG-42937
Change-Id: I9e7b2de8f7f8ba031c2610ff5ac0858e357424bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
"description" suggests something slightly longer.
this may seem like a gratuitous change, but the upcoming replacement of
the old feature system clarifies makes it seem much less so.
Change-Id: Ibe702e01cb146b59127bf1f990b4acaef1c61d55
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is required to do the modularization of those
features properly.
Change-Id: I384aff20274e795aa70483980f0ef25309328800
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The actual blocker for precompiled headers is not the iOS/tvOS/watchOS
platforms, but the way qmake handled multiple-architecture builds on
Apple platforms.
This patch allows multi-arch builds to be performed while using
precompiled headers.
Since df91ef3d6c55692a0236f67b6c6b134a3bf84098 (April 2009), Clang has
had support for PCH files in the driver, which allows to use the
-include flag to automatically translate to -include-pch. We can then
take advantage of the fact that the -include option is allowed to not
be separate from its argument, which lets us take advantage of -Xarch to
specify a per-architecture precompiled header file.
This is done through some magic in the qmake Makefile generator which
"multiplexes" the PCH creation rule across multiple architectures and
replaces a series of tokens with the proper precompiled header paths
and architecture flags at usage point.
Change-Id: I76c8dc9cda7e218869c2919f023d9b04f311c6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the public win32/opengl.prf references it, so it must be public as well.
Change-Id: I95f6571bd3cdb7d35b2182bebf663e50140e065e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
as these tests do nothing but validating the command line, caching the
result is more confusing than anything else.
also make the tests silent, so they don't clutter an otherwise fully
cached configure run.
Change-Id: Ifc3d65278769b36a056650f077fd6274a7e192e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Widgets is not particularly useful on tvOS without significant work due
to the focus model, and widgets is completely useless on watchOS except,
theoretically, a platform plugin which displays its UI over the network.
Widgets is not particularly nice on iOS either but is at least usable so
it remains enabled there.
This is sort of a revert of b4ebb61c0d,
except that this now simply turns off the feature by default rather than
disabling its use entirely.
Change-Id: Ice4215c344da4568792f8b5356e11367bde6828f
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The library compiles, but is not usable on iOS, so don't
compile it by default on that platform.
Change-Id: I49b687b526a2998250ff5b57f1ea3df30cf8d7a5
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
- remove the unconditional CONFIG+=c++11 from default_pre.prf, so the
change actually has any effect
- fix up the description fields somewhat
this amends 091df96fb8, which was rushed in without maintainer review.
Change-Id: I88b859d6e2f0fe3d6a4771afe464a7c445e7b47b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Defining QT_OPENGL_ES_2 would only lead to conflicts with defines from
qconfig.h.
QT_OPENGL_ES_2_ANGLE also moves to the .pri.
QT_OPENGL_ES_2_ANGLE_STATIC is not used and is removed altogether.
Change-Id: I614fb00525ac696e066ac8328bb9bf61fca08a01
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Stop messing around with the define in pro files, and rely on
the configuration system. Disable fontconfig on Mac, which in practice
gives the same result as before.
Change-Id: Iea3aec127af96f221f4ee8682fb20a624332b82f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This replaces the QT_NO_STATEMACHINE_EVENTFILTER define, and
gives it a proper name.
Change-Id: I2b9386458224ff2bd30003daac548daa61961085
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Instead define a proper feature for it and use qtConfig().
Change-Id: I64b1d26b2419a24d3239e9935341b7d535990dfb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The configuration system already takes care of setting QT_NO_ICONV.
Also move the platform conditions for using iconv from the pri file
to the .json.
Change-Id: I91b08bcee6799deddabcbb4a91d0a3f9ed7f0f28
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Output the version as a define into the private config header as
a define using a hex number. Like that we can easily do version checks
on libraries using the QT_LIBRARY_VERSION(lib) and QT_VERSION_CHECK()
macros.
Change-Id: I6dc4ac6550886ca95c5542b6e75cd933ed079d76
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this switches all instances of LIBS[_PRIVATE] += -lfoo where a config
tests exists for foo.
this removes some code duplication between tests and project files (in
case of conditionals), and ensures that the projects always actually use
the libraries configure has found.
Change-Id: Ia7e80c8db5f329290c7f1a4e03a8bf78882a687e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this migrates the cases where the build system already made (some) use
of variables (possibly) set by configure.
Change-Id: I43a08caed481d5f887a3a40821e71a4797760e7e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... including a [-no]-ico command line option.
Change-Id: I3cb13d2be72b512f72f8dcdb9de72e7a99e36e47
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
cleaner, and covers windows as well.
Change-Id: I0e884909a3f49610fab750ba1ef6112f43e5d5d1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Adapt configure.exe to use qmake to do most of the work of configuring
Qt. This unifies a large part of our configuration system between Unix
and Windows. configure.exe is now still doing the license check,
creating qconfig.cpp, building qmake, and not much more.
On the way, re-implement the still missing Windows-specific tests with
the new system.
The opengles2 vs. opengl-desktop conditions got a bit convoluted, as
Unix prefers desktop GL, while Windows GLES2 (via ANGLE). Superficially,
there is a circular dependency, but the platform scopes are supposed to
break it.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia1941f2c34b7f5bd4990a7673cd737361381c2e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it is sometimes desirable to override values from the mkspec without
modifying (or wrapping) the spec itself. linux distributors do this on a
regular basis.
so far, we'd pick up CFLAGS, etc. from the environment, in a somewhat
autoconf-like fashion. however, over time, this approach proved
problematic: the concept doesn't mix particularly well with mkspecs to
start with, is unexpected (and therefore causes frustration), and
doesn't mix well with cross-building (at least the way it was realized).
ironically, it was implemented this way (quite a while ago) upon my
explicit request ...
the new mechanism uses explicit variable manipulations on the configure
command line, just like qmake itself understands. as it happens, this is
again quite similar to autoconf-generated configure scripts. however,
this time around we don't pretend to be actually autoconf-like, so we
also don't try to map any variable names (some of which have different
semantics anyway).
this commit also eliminates the last use of the QMakeVar() function,
so delete it and the underlying infrastructure.
Task-number: QTBUG-32530
Task-number: QTBUG-42962
Change-Id: Id31a6b80e1add08ca21f5b178614bda530d12374
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add the command line options supported by the windows version of
configure and respect them when running our configure tests.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I1206d60a177e251540d34d232c73c930847564b3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add [-no]-style-foo command line options for all widget styles, bringing
this closer in line with configure.exe. Add proper platform dependencies
and a configure test for the required uxtheme.h header on Windows. Clean
up and simplify styles.pri. Don't let configure.exe define QT_NO_STYLE_*
any more, as styles.pri does that locally anyway.
Change-Id: I81341f887a65b4e45e77380974eb79743acfad77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some test types (like the compile tests) require that other
features have been checked before, so that the compile test
sets up the right environment. Implement this through a
'testTypeDependencies' section in the json file that explicitly
encodes those dependencies for certain test types.
This replaces the 'priority' field in the feature list.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I70e7c67a4f2c971149bcac090cecbbe9cfff3f57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so far, each library was distributed over a test and (optionally) a
'library' output of a feature. this was conceptually messy and limiting.
so instead, turn libraries into a category of their own.
libraries now support multiple properly separated sources, which makes
overriding them a lot saner. sources can be conditional to accommodate
platform differences.
as an immediate consequence, move (almost) all library references from
the config test projects to the json file.
a few tests were excluded, because they are doing somewhat magic things
that should not be handled in this bulk change:
- freetype: .pri file shared with actual source code
- clock-gettime: -lrt is conditional, and there is a .pri file which is
shared with actual source code
- ipc_posix: -lrt & -lpthread conditional
- iconv: -liconv conditional
the multi-source mechanism is used to make a variety of tests work on
windows, where the library name differs from unix (and sometimes between
build configurations). some tests still needed minor adjustments to
actually work.
on the way, fix up disagreements between manually specified libraries
and pkg-config lines (affecting several xcb-related tests).
Change-Id: Ic8c58556fa0cf8f981d386b13ea34b4431b127c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
having compound tests is messy, and we already have a separate test for
that anyway.
the kms test itself gains a fallback library, as that's what both the
egldevice test did and the actual projects using kms do.
Change-Id: I4544b64de86d58d6c6449bc0ad9095acaf144056
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it's bound to the bourne shell, which is not readily available on
windows hosts.
on the way, the pch, fvisibility, and bsymbolic_functions tests were
rewritten as regular compile tests. they now just verify that qmake's
built-in support for the tested features actually works.
Change-Id: Ibac246f21b5ececa40da3f576dc789982eaf9fdf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's really a bit weird that the windows configure has more options to
configure unix features than the unix one, even if some are just
workarounds for missing auto-detection.
unlike in configure.exe itself, -posix-iconv is now also understood for
symmetry with -gnu-iconv and -sun-iconv.
Change-Id: Ic15376e5822e43b998bd17f02c11e5dd0567dc2b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
overriding an output's 'feature' field would just lead to confusing
error messages. the right way is setting the 'name' field.
adjust the 'dbus' library output to this policy.
Change-Id: I912133f3a0a50fc55f2e16a1ed6bfa464aae8d88
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the test names should be about the dependency, not the purpose.
Change-Id: I6e45f4caa36e6c6a9e62092416bcab89893db3d2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
we pass the pre-quoted value directly to the output function, which
adds another layer of quoting. to avoid over-quoting, introduce the
'eval' attribute which sends the value through eval() first, thus
removing the extra quoting.
Change-Id: Ic63a50cb7eccc61b0f730476e124339aeb95586c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
The config test for eglfs-brcm would fail otherwise on modern Yocto-based
sysroots, as these have no /opt/vc, but have a proper egl.pc that has the
include path and libs.
Task-number: QTBUG-50838
Change-Id: Ibe8dcfbfe9aabe00fd8c040e6e41a4479ccb39bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Report error when using RPATH settings on platforms that don’t support
it or when doing static builds
Change-Id: I2ba0c2bff5347170c7fcb339da80ef1f1974d43a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's the only OS with braindead "old" dtags in the first place.
Change-Id: I0fba436ff3f9fc061c1741b1899ca133b8ad6b5e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused when this type was invoked explicitly
(because of using a condition).
adjust the neon/mips_dsp/mips_dspr2 descriptions to match the context
and remove the now redundant "message" fields.
Change-Id: I08558f342a0d9189a37145085e5470f91a9d0881
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused for this type.
adjust the c++* descriptions to match the context.
Change-Id: I2a76b5651892bf9bd6fec315e446bfdb7c3aee97
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they are really meant for pretty-printing the summary in the first
place, and were previously unused for this type.
adjust the sse/avx/avx512 descriptions to match the context.
Change-Id: Icf514718355c6ccd608d825b70296cc0383dbfe8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this ensures that we complain if desktop gl or gles2 is explicitly
requested but not available.
Change-Id: Iad068ef34cdf9353cb483d4dc667ddd85ded740d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this ensures that an explicitly requested linked/runtime support is
complained about when the test fails. the old configure would do that as
well.
Change-Id: I7f235fa7df5e5d53938de0e32b07536447b8d1d4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
introduce -openssl-runtime and -openssl [no|yes|linked|runtime] for
consistency with the respective dbus options.
Change-Id: I061b46b52b3132ead4332b33f7a60d6fe0e73ab9
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... by chaining it to the dbus feature, as is done for openssl/-linked.
Change-Id: Id1f9f761914c356d2a0056aa80213954dce3403d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Change d1b09dba45 removed the
support to detect the C++ version the compiler used by
default. In essence, it forced the compiler in C++11 mode,
if the default was still C++98.
This change reimplements the functionality in the new
configuration system.
Change-Id: Ib4bf7ade85288776f9ae2a870f19764df727e0a5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These arguments were nonsensical, as they would lead to every single Qt
module linking to those libraries. This was probably some left-over from
old times, when Qt was just a single library.
Change-Id: I0343a6df270fd0d2efa5333ba4e457670f5d0910
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
we need to map it to the avx512f feature.
Change-Id: I565b5bd256003aa6f80180b0e06c04bad8ea68af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Map it to the correct feature name.
Change-Id: I7e2128e66a575ae7e562018b766d25f85c64c961
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's only used in one place, where it's actually not required either.
Change-Id: I5766d2b5f0c1083bbd58a9b9fb07cc67bbd46a94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is not a feature that should get propagated to other
configure runs, so simply hardcode support for it.
Change-Id: Ieb1c33243154b3583e91061d3592d7e87c36f402
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Detect host and target architecture from within qmake, and set
QT_ARCH accordingly.
Change-Id: I30255f88c7645d197bd07355a1dff02b377cbbe8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There is a config test for DirectWrite we should run, so
use that instead of autoDetect=false in the new system.
Also, don't add the feature to the CONFIG variable in
configure.exe, as it's not used that way anyway.
Change-Id: I9266ccda8405adce765eac8f0435d723c6bc6f1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A small logic error that sneaked in during the porting of configure.
We actually want simulator_and_device to be set if input.sdk is
empty, not the other way round.
Change-Id: I8f729fbc48617618f981c70887bd4400e0b2a0c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Command line arguments, configure tests and features are now
defined in a json file and a configure.pri containing some
custom functions.
qmake uses the json file to determine command line arguments,
tests and features to be executed at configuration time.
A new qt_configure.prf contains all the infrastructure to parse
the command line, run the configure tests, determine the set of
available features and create a report about it.
Change-Id: If30ac089dd3e9f8c67ebd642bde10cfa960893bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
