According to the SSL_CTX_set_max_proto_version manpage [1]:
> Setting the minimum or maximum version to 0, will enable protocol
> versions down to the lowest version, or up to the highest version
> supported by the library, respectively.
This should make it possible to use Qt Network with older versions of
libssl than it was compiled against. In particular, use with 1.1.0 when
compiled against 1.1.1.
Also, one of OpenSSL developers is suggesting to remove TLS_MAX_VERSION
from the public header in the future [2].
[1] https://www.openssl.org/docs/man1.1.0/ssl/SSL_CTX_set_max_proto_version.html#DESCRIPTION
[2] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908567#59
Change-Id: Ie76054b917daa8e54d5c0156e848dbaca7bb8a82
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Under the hood we use QSettings to store HSTS policies.
Qt configured with 'no feature settings' would fail to
build then. For such builds, we fall back to in-memory
only HSTS cache.
Change-Id: I6df551d8c6c96d982080a51ce6b1bdce71d04b9f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The update to 1.3.0 was done in
b2a7d865b2.
Change-Id: Ie4227d49a1ee0707abff754a5edbcb2b9663ccfe
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The source is an ElfXX_Off, which is an unsigned 32- or 64-bit. That
means any section bigger than 2 GB would cause an overflow when we
assigned in
m_stringTableFileOffset = strtab.offset;
Change-Id: Ib47c56818178458a88b4fffd15546bd47a89894e
Fixes: QTBUG-70560
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Fixes a speed regression on ARGB32 painting on low end hardware
introduced when it was switched to using the RGB64 raster routines.
It turns out several of our embedded QPA targets use ARGB32 as native
format.
Task-number: QTBUG-69724
Change-Id: I6d7993c12da46a85b8354eb905930dae9602b5e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both sqlite3_open_v2 and sqlite3_close are documented to return an error code:
https://www.sqlite.org/c3ref/open.htmlhttps://sqlite.org/c3ref/close.html
However, those were ignored (other than checking whether the operation
succeeded), causing QSqlError::nativeErrorCode() to always be "-1" when there
was an error while opening/closing the database.
Additionally, the error string needs to be read (via sqlite3_errmsg16) in
qMakeError *before* d->access is set to 0, or the databaseText() will always be
"out of memory" no matter what error actually happened.
Task-number: QTBUG-70506
Change-Id: I75cbf178c9711442e640afd26c4502214d20c598
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Samsung devices this would cause it to always to captalize each word
even if it was not a new sentence. Therefore we use QTextBoundaryFinder
to determine if it is a new sentence or not.
Task-number: QTBUG-69398
Task-number: QTBUG-66531
Change-Id: I24bf36f09a2570acfefd4343551cb1720ddc6279
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If SHM is disabled, that code path already does its own bswaping.
Change-Id: I6c17f6c5c5502c8f89098d38d931b6b8f50b2640
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
in non-prefix builds, the forwarding headers always end up in qtbase's
build dir, while the injected headers always live in the build dir of
the module they belong to. to deal with that, we now record the target
path relative to the module root dir instead of relative to the base
directory of the forwarding header itself.
Fixes: QTBUG-70056
Change-Id: Ic4346148a125b13e2610f6965cdf4f5266ac763e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make the decoder fail early to avoid spending time and memory on
attempting to decode a corrupt image file.
Change-Id: I874e04f3b43122d73f8e58c7a5bcc4a741b68264
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
src/sljit features the BSD-2-Clause license, not the BSD-3-Clause one.
[ChangeLog][Third-Party Components] Added documentation for the SLJIT
part of pcre2, which is available under the BSD-2-Clause license.
Change-Id: Ie1e981ef6eab2c8d2960919b66ac85b29450f919
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Applying the transformation in question has no effect on the winding
order. Rewrite that section.
While all the examples are correct, clarify the rules for the geometry
they use since the winding order varies. Fix up the triangle example code
to use front=CCW for clarity (even though it does not matter much since
culling is off there).
Change-Id: Icb968c76cc9fa918a5608d3c66b4fccd5668175e
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
The snippet tries to explain the advantage of
str.arg("Hello", QString::number(20), QString::number(50));
over
str.arg("Hello").arg(20).arg(50);
which only makes sense, if str contains the same formating sequence,
namely "%1%3%2". That also matches the belonging comment.
Amends 8481500f63
Task-number: QTBUG-44044
Change-Id: Ic2595107bc599c6d244ebf88184a5cc5569ed4f1
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It seems when a WebEngineView is parented by a window its accessible
interface will not know its parent, which prevented the root of an
UI Automation fragment from being found, causing missing accessibility
info. This change adds a workaround to avoid this issue.
Task-number: QTBUG-70199
Change-Id: Ia7cfc9f410c4f0ef3b5f9d1700748a9a3e29b7c2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This does not really work: as soon as you build with
the 10.14 SDK you opt-in to having updated palette
management, which the Qt 5.11 series does not have.
This leaves app developers with two ways to opt-out
of dark mode:
- Build with the 10.13 (or earlier) SDK.
- Set NSRequiresAquaSystemAppearance in Info.plist
This reverts commit 04671a80db.
Change-Id: I5c01b9965da45de914f699526ba0723837f36e1d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
The widget visibility state was set to explicitly hidden,
which was preventing it from working correctly when
its parent widget was shown.
This regression was introduced by commit d7a9e08,
which made QWindow::setVisible() call QWidget::setVisible().
QWindow::destroy() calls QWindow::setVisible(false),
which means that the destroy() call in setCocoaView()
would set the CoocaViewContainer to be explicitly hidden.
Clear WA_WState_Hidden to work around this behavior.
Task-number: QTBUG-67504
Change-Id: I77438fcd01f165f058eea178c214838bd4f27084
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Otherwise the SDK upgrade (or downgrade) may subtly and silently affect
the resulting binary, or if it results in build breaks, the user won't
know why.
We limit it to applications for now, as that's the point where it's
most important to catch the SDK upgrade, but technically we should
also do this for intermediate libraries. Doing it for everything
will likely incur a performance cost, so we skip that for now.
Change-Id: I8a0604aad8b1e9fba99848ab8ab031c07fd50dc4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The files match the ones in pixman 0.17.12
Task-number: QTBUG-69276
Change-Id: Idd03c6979456ad2cf4dcc2aee6986ebc95140937
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Short-cuts the case where there is no gamma correction to avoid a
conversion over RGBA64 and back.
Change-Id: I100697a9f7a4b94283557b2c0eaa45e0eff81785
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Minor bug that caused highlighter to not work properly.
Task-number: QTBUG-66084
Change-Id: I7860d7a13c402e3236f4c844020e35e11f6e53e5
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
std::get and std::visit are only available on macOS 10.14, so as long
as we're building with a deployment target lower than that, we can't
enable C++1z globally unless we special-case use of those functions.
Change-Id: Idb5eb5992ea4dd7eab92f5310321720e19ac793e
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This prevents the view from triggering display of its superview when
being temporarily added, which is both inefficient and causes issues
when those dirty-rects are wrong due to the wrong frame position of
the added view.
The additional drawRect: calls and corresponding expose events
resulting from the needsDisplay calls also caused repaint issues
in Qt Widgets. QWidgetBackingStore doesn't seem to take the exposed
region into account for an expose event, and will try to flush all
dirty regions. Some of those may be outside the exposed region,
and will be clipped away by the window system, never ending up on
the screen, but with Widgets still thinking it has flushed all
dirty regions.
This is a separate issue, possibly solvable by setting the
wantsDefaultClipping property on NSView to NO, but this needs
further testing, so applying this commit as workaround makes
sense, even if it's just hiding the real bug.
Task-number: QTBUG-67998
Task-number: QTBUG-68023
Task-number: QTBUG-69990
Task-number: QTBUG-69740
Task-number: QTBUG-69292
Task-number: QTBUG-69332
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 38979332d0)
Change-Id: I4ef3fef29f749daa4f3a11fe9186ae77b359f966
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Following QTBUG-40015, QDomDocument::setContent is reentrant.
This change updates the documentation accordingly.
Fixes: QTBUG-69920
Change-Id: Id09e3541156f52d1a976afd02b410c263d3b3352
Reviewed-by: David Faure <david.faure@kdab.com>
We have #if-ery on Q_OS_DARWIN controlling an expectation of gettign
"GMT+1" and "GMT+2" instead of "CET" and "CEST" in two tests; this
turns out to not be a deficiency of macOS so much as of how we
configure Coin's VMs. While we fix that, we need to ignore failures
in these tests, so that we can pull the #if-ery out and clear the
blacklist once the VMs are set up properly.
Task-number: QTBUG-70149
Change-Id: If3577200cf980b3329161ab3eea7bd2e9d0124e0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Under certain circumstances, if you had a widget with a QOpenGLPaintEngine,
and drew QStaticText into this, and then later had Qt Quick access the same
cache and try to resize it, we would get a crash because the resize function
would have a pointer to the paint engine and try to access its shader manager
(which would now be null, since this is outside the begin()/end() phase of the
paint engine.
The solution is to reset the paint engine pointer to null on the cache once it
has been populated and it is no longer needed.
[ChangeLog][QtGui][Text] Fixed a possible crash when combining QStaticText,
QOpenGLWidget and Qt Quick in the same application.
Task-number: QTBUG-70096
Change-Id: I7383ad7456d1a72499cfcd2da09a5a808d4b3eff
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
CLDR up to somewhere between v29 (used by 5.9) and v31.0.1 (used by
5.10 and later) claimed Costa Ricans don't include fractions in their
currency; now it claims they expec two digits. Apparently one of them
does expect those digits, so this is the regression test I'll be
cherry-picking back to LTS, to accompany the CLDR updates they need.
Task-number: QTBUG-70093
Change-Id: I138772cc6013fa74de4f7c54b836cac83421eab2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
_q_interpolate<T> subtracts 2 arguments of type T,
for unsigned types this can cause wrapping around
Task-number: QTBUG-57925
Change-Id: Iffa59f413579a3d5de8cb728fe71443d8e8a04aa
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
After 0ef66e98cc was merged, the same should be done to
Windows ICC toolchain.
Task-number: QTBUG-69997
Change-Id: I1d76d8b59f87151a9064d9f7dcc3136dc1215633
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qdoc now handles \threadsafe also for macros, so we can remove the
explicit \note.
Change-Id: Iabeb7f69d237e7024a4f584adc516951b06d752b
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
With g++ 8.2.0, I get warnings when a QVarLengthArray<QString> calls
remove() or prepend(), as some tests in tst_QVarLengthArray do, as
they call memmove() "writing to an object of type ‘class QString’ with
no trivial copy-assignment; use copy-assignment or copy-initialization
instead"; which may indeed be a good argument for not using
QVarLengthArray<QString>, but its own tests do.
Change-Id: I4f8a64948b32a54e67a285df4ec7788f60739ffb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAccessible::StaticText should be mapped to UIA_TextControlTypeId instead
of UIA_EditControlTypeId.
Task-number: QTBUG-69894
Change-Id: If2f8f55d2be492c02a3af5b1813ca12cf774a33a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Fixes a regression introduced with the update to the bidi
algorithm.
Task-number: QTBUG-69633
Change-Id: I7eac45ed3ffb41f89ea3f793eedcfb6fcdace871
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Don't show the mark simply because we have unicode code points
larger than 0x590.
Task-number: QTBUG-69665
Change-Id: I9af97383f3bcd52277a5288e7ad06ec240c7e51c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Before this change, if you try to insert a row at the bottom of QSortFilterProxyModel
the row will be inserted in the source model at position proxy->rowCount rather
than at the bottom. This causes insert at apparently random positions in the source.
[ChangeLog][QtCore][QSortFilterProxyModel]
QSortFilterProxyModel::insertRows(row,count,parent) with
row == QSortFilterProxyModel::rowCount will insert at the bottom of the source model
rather than at the row QSortFilterProxyModel::rowCount of the source model
Task-number: QTBUG-58499
Task-number: QTBUG-69158
Change-Id: Ie78416c8fbc429303b8c9c98375630e3e4d85f6d
Reviewed-by: David Faure <david.faure@kdab.com>
