Pairs are easy to use, but they have no semantics attached: Two
QPair<QString, QString> compare equal, e.g., even though one is used
as a FontAndStyle and the other as, say, a type/subtype. It also
carries no information for the reader of the code.
So, write a minimal struct with equality and qHash() instead.
Change-Id: I9514c9b7d6c2cc6a4831f9ca83ca2ee466d91553
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch adds the missing documentation for the new QSslCertificate
PatternSyntax enum which replaces the one from QRegExp.
Fixes: QTBUG-84464
Pick-to: 5.15
Change-Id: Icf092f42ad4dff9207ca51dfd8b4fb8ed6443ff2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove setRoleNames() and all its now unneeded helper functions.
Change-Id: I0a83751aace35700655d4cc7c79278325994cbdd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Port away from random-access of the returned sequences. That's
neither necessary nor does it make the code more readable than
the alternative single-pass implementation used here.
As a drive-by, make applying NRVO more likely by re-using the
`result` variable for all returns after its declaration.
Change-Id: I2c3bbaefa6b6f08ebf0b90fb7be62e3c6243f19d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
And not pure swap. As per policy, QVariant must leave the rhs empty.
Change-Id: I2d5e0f584c4d4fffd05a0a5bfae27ddcb72430e9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The code was reading from uninitialized memory when creating a
variant. Fixing that reveals that the test semantics
are broken: when dealing with datatypes without a registered
operator==, QVariant resorts to memcmp, so the two objects
would've actually compared equal. Amend that.
Change-Id: I36bad7ee6a45154d5d534b7dd8b618cc0a900126
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This option changes the order of include paths, which can cause problems
of various kinds. See https://bugs.debian.org/958479 for an example.
The benefit of that option is minimal for what it was intended.
Pick-to: 5.15 5.12
Change-Id: I80eeabd09764df290b60bc59aeb2f90d07723608
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Any integer modulo 1 can never be anything else but 0, so the statement
could never be true. The intention is to abort in case of an odd number
of bytes, as this would indicate malformed input that can't be decoded
into a QString.
Note that QTranslator will then silently continue to search for valid
translations, and not print any error message at runtime, or otherwise
inform the user or developer that an input message file contains
malformed content.
Change-Id: I957b337ee035f3aca013e0859f8ee70553d9a97b
Coverity-Id: 11014
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The QLayout::setMargin(x) call has been deprecated since Qt 5.13.
It was an alias for setContentsMargins(x, x, x, x) so we just
replace it with that.
Change-Id: I1c89eebfe776e0e3c8d0bdc19244bd452db4ef3c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Details of MSVC version became irrelevant some time ago; the code now
just tests for MSVC. In any case, the reader doesn't need to know how
the function is implemented, as long as it does what it claims to do.
We do not, in fact, use a random number source when generating the
return value for comparisons involving only one nullptr; we quite
consistently treat the nullptr as less than the other string. Make
explicit that this is true even if the other is empty.
Change-Id: Ifd9b00fdf8e814fcf933a05821201670fecfd646
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
It's a bit annoying that you have to include <QStringTokenizer> to use
the tokenize() methods. The separation is a historic artefact, just fix it.
Change-Id: Ied4cc0c8dd2bb6735bf29fbb26fdbf47d07db264
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Apart from a more fitting, minimal, API, QDuplicateTracker also
transparently uses C++17 pmr::monotonic_buffer_resource to avoid, or
at least reduce, memory allocations.
Change-Id: I0a0d1e31fd35d483e0036045847a3759b593c71c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In some places QByteArray does interpret bytes as characters and a
sequence of them as a text string; everywhere else, however, it now
refers to them as bytes.
Add a section to the class doc explaining how char* pointers are
interpreted; the handling of '\0'-termination is surely familiar to
most readers, but making it explicit provides contrast for the
explanation of there being no such special treatment of '\0' bytes
when a stard address and length are given.
Also mention in the class doc that interaction with QString is done
via UTF-8 encoding and can be avoided by defining a macro. Shorten, in
light of that, the description of that encoding where it appears in
affected methods.
In the process, clean up lots of phrasings.
Change-Id: Ic97dce4a20752e277eeab35a06737322b2074692
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This amends commit 9dd8e655cd to fix the
various references to section {8-bit Character Conversions}, which is
now renamed {Character Case}.
Change-Id: I1f777ab359c616a1b12f05a12b1cd7397f3ccb18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously only qstr*icmp() were tested and the test data was sent via
QString and {en,de}coding. Use a local data-type to package pointers
to actual string literals for passing to these functions that take
them. Fold the various tests involving null pointers and empty
strings into the general testing, removing from "singularity" tests,
and combine the remainders of those tests into a single test of
singular cases for QByteArray::ompare. Move all these tests to
alongside the existing tests for QByteArray::compare. Use nullptr
rather than 0 as the null string.
Change-Id: Ie6d01e839c330c2f960af4bcc95e5633539337d6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QByteArray code doesn't use QLocale or QString.
Change-Id: I60966ecad35fdaaef9930ba2746bf732fa9f3cd7
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A check to prevent crash-on-exit if QLocale::setDefault() was called
after the default store was torn down had the side-effect of causing
setDefault() to not record data if it was called before the first
access to the default store caused it to come into being.
Change the check to test that the default store has been destroyed
and, if not, create it if it doesn't exist yet. This refines commit
4d6572aac0 (as modified by commit
11c5c078c7).
Fixes: QTBUG-83016
Fixes: QTBUG-83415
Pick-to: 5.15
Change-Id: Icbce9bd9c75d0258d403e2f90957561b5a18bdf3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't want to have untested qtbase.
This reverts commit 3598ffcc26.
This change also skips two network tests on b2qt.
Change-Id: I5c6f5e19487775f0a1c0feafa5e085208cbf7e9a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Replace the implementation of blockingMappedReduced():
after calling non-blocking version of mappedReduced() we are getting
the future object, so we may call in sequence result(), which
will block and return the result when the all tasks are done.
The same is done with blockigMapped(), which calls blockingMappedReduced()
with a custom reduce function.
Looks like with this pattern we can reuse the non-blocking version
for implementing blocking version of mapped / filtered methods.
Task-number: QTBUG-83918
Change-Id: I7f240cfbd04834d551ff79d717b72194a26996d7
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The pipeline value is set by window property _q_platform_qnxPipeline.
Task-number: QSR-263
Change-Id: I13536936b2335a97a6eeb5a94c4e0f552308d15e
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
The headers are now C++ clean and can be used outside of Objective-C
code. All includes of Objective-C frameworks have been moved to the
implementation files.
Header guards have been added in the few places they were missing.
All includes are now done via #include, instead of sometimes using
the #import variant.
Change-Id: Ibb0a9c0bcfefbda4347737212e40e300a3184982
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Now that the whole file is not included when doing standalone tests,
the conditions are not needed anymore.
Change-Id: I49ddd2fc4a8327e09529948785f40cda5dedbb11
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Three different people have encountered the issue that calling
calling qt-cmake on a project prints 1000 inclusion lines of the same
qt toolchain file, and then CMake bails out saying can't find the
CMAKE_MAKE_PROGRAM Ninja.
This happened because people accidentally called qt-cmake to configure
qtbase (instead of just cmake), which created a toolchain file that
chainloads itself recursively.
Error out when configuring qtbase, and when using the generated
toolchain file in the case when it would try to include itself.
The solution is to remove the qtbase CMakeCache.txt file, and
configure qtbase again, so it generates a proper qt.toolchain.cmake
file.
If somebody feels enthusiastic, they can move the check into the
qt-cmake and qt-cmake-private shell scripts, and error out before the
qtbase/CMakeCache.txt is polluted with the wrong toolchain file.
That is left for people that feel more comfortable with bash and batch
scripting.
Change-Id: If518c94791fe7c30731e6e462e347f26a5213c64
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Include headers in .pri files should point to the framework Headers
dirs.
The module name in the .pri file is not versioned when it's a bundle.
Paths to system frameworks in .prl files should instead be replaced
with -framework Foo flags.
Change-Id: Ia353d033799fae40a1bc55fad6f86b2c8ef76c56
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
We reported that double-conversion was found on macOS if the std
library supported sscanf_l and _snprintf_l, but that's different
from what qmake does.
This caused not to compile and link the bundled double-conversion
sources, and caused tst_qvariant to fail when doing double conversions
on macOS.
Remove the extra config tests, and make it work like in qmake, so that
the bundled code is used instead. This makes tst_qvariant pass.
Amends 729a73a9cf
Change-Id: I7ddaed5fe6916f483fb3de1962657d7fb6fb40be
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The helper processes were not in the correct location.
Change-Id: I0a80a22a931625ea0c9370db38ff29c881b964cb
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The helper executable needs to be a bundle, because that's
what the test expects.
Change-Id: I7c3f72f12b7a744478b4832685d032abfc679e5b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
It's disabled in qmake too, due to being almost all blacklisted
and flaky. Plus locally when i tested, i had to give accessibility
permissions manually, otherwise it failed.
Change-Id: I55ce7a81c46ac28f41c43f5c159fecc22d489966
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This got forgotten when SQLite was upgraded to v3.32.1, so this amends
e10e989ce83027f2f620bb6948be4948f3c91e76
Change-Id: I75799b6c55bc39c4cc050b5eb18a99d9f197410c
Pick-to: 5.15 5.12.9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
C++20 will make this true for everyone, but as far as Qt goes,
this has to apply to all platforms even before that.
Just add another couple of checks to the list.
Change-Id: I0251ce431d4584380cfd3fc3e4b36f1dbdbf9df2
Pick-to: 5.15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecated the pause-related APIs of QFuture* classes and
added alternatives having "suspend" in the name instead.
With 2f15927f01 new
isSuspended()/suspended() APIs have been added to QFuture* classes for
checking if pause/suspension is still in progress or it already took
effect. To keep the naming more consistent, renamed:
- setPaused() -> setSuspended()
- pause() -> suspend()
- togglePaused() -> toggleSuspended()
- QFutureWatcher::paused() -> QFutureWatcher::suspending()
Note that QFuture*::isPaused() now corresponds to (isSuspending() ||
isSuspended()).
[ChangeLog][Deprecation Notice] Deprecated pause-related APIs of
QFuture and QFutureWatcher. Added alternatives having "suspend" in
the name instead.
Change-Id: Ibeb75017a118401d64d18b72fb95d78e28c4661c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
