qWaitForWindowActive waits until the timeout for the window to receive
a non-0x0 position, even when it's active, just in case the WM sets
the position as a response to focus-in.
Change-Id: I748cce2747f406a8cdff556465175f02675fcd13
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This is an Android only patch, a proper implementation
will be pushed soon to stable branch.
Task-number: QTBUG-29462
Task-number: QTBUG-33588
Change-Id: I3447c523b4533a768d7f95e4ae60541b09a7944f
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
GCC refuses to use a merely static const uint array in a constexpr function.
Fix by making the array constexpr if supported by the compiler.
Change-Id: Idd59d3f74f8f4e98aad82bc892f4a6469932df9f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This code was duplicated in every qcollator_platform.cpp and identical everywhere,
except in _icu, which uses a QByteArray m_key and the implementation used
QByteArray::operator<, which is semantically and probably code-wise identical to
what the other implementations did (after inlining).
Inlining this function removes a potential maintenance problem and increases
speed without violating encapsulation.
Change-Id: If3e9d38a7d4326b49f0611a9f4187c53960e8a03
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This enables specialisations of (std and q) swap using member-swap
and declares the types movable for efficient use in Qt containers,
and QList in particular.
This is a binary-incompatible change, so cannot wait for 5.2.1.
Change-Id: I7e90b6397ac4d00d0a7a5c42bae166c1b43e1994
Reviewed-by: Aleix Pol Gonzalez <aleixpol@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This necessitates adding d==0 checks in QCollator. By documenting that
moved-from instances can only be assigned to or destroyed, we can
limit the functions in which to check for d==0 to the assignment
operator and the destructor.
Doing otherwise would destroy all advantages of move semantics by
introducing a heap allocation to re-populate other.d.
Add a test for this (QCollator didn't have any before).
Change-Id: Ic6ff202072822bebfd5e48259c3d0fa345a63118
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Vertical scrollbar may get out of sync. When this happens, the calculation of
firstVisibleItem will retrun "-1". This must be handled in ::sizeHintForColumn().
Added an auto-test for the crashes.
Task-number: QTBUG-34717
Change-Id: I867fd144ef3ce45e382337c5eafe345f573cd944
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This is standard for (QObject*) ctors.
Change-Id: I4756ba50b1f3148d72e95e581d52a37ebd47a7ae
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This ensures that the possible window flag combinations are respected
where possible in Cocoa.
Task-number: QTBUG-34645
Task-number: QTBUG-31616
Change-Id: I6be8ca666b7cbc397575e97cd95ea298f52a7113
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Task-number: QTBUG-32308
Change-Id: Ibbab3852e5cc289faa63d0a66a3816ab8062ccb9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Brad King <brad.king@kitware.com>
The inplace_converter_map never had an entry for ARGB4444_Premultiplied
this leads to the possibility of accessing outside of the array, and
means the RGBA8888 formats are misplaced.
Change-Id: Ida0d94912b53a7730b8fb5f6ccc31e7879ea3d27
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
qcocoaapplication.mm:118:61: warning: cast to 'id' from smaller integer type 'int' [-Wint-to-pointer-cast]
id a1 = ([args->arg1 isKindOfClass:[NSNumber class]]) ? (id)[args->arg1 intValue] : args->arg1;
^
qcocoaapplication.mm:119:61: warning: cast to 'id' from smaller integer type 'int' [-Wint-to-pointer-cast]
id a2 = ([args->arg2 isKindOfClass:[NSNumber class]]) ? (id)[args->arg2 intValue] : args->arg2;
Change-Id: Ibcf3d5d5698ff863f3c9bd65e0388ccca147f419
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This is required for a Qt value type these days.
Change-Id: Ibd4e1581a4f4791a410caa10fede92c26b35dd9d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QCollator and QLocale are not equivalent types, so there should
be no implicit conversion between them.
Change-Id: I395f8dc3c35b4202c9276c3eea0686176f8e07cc
Reviewed-by: Aleix Pol Gonzalez <aleixpol@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was providing all possible types, but now MessageDialog is a new
native dialog type, and only on Android at the moment.
Task-number: QTBUG-34784
Change-Id: I2fb288c8d5e176ca4dafbbc310de2f29bbcfc000
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
This was actually causing test failures in qtdeclarative
and blocking the CI there.
Change-Id: I4538342f16b6468ad60b283c19948863b20ad5d4
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Touch positions reported by libscreen have to be adjusted relative to
the window position to be properly interpreted by Qt.
Task-number: QTBUG-34812
Change-Id: I68744dc9da95fb1d0d1704d12154fb24c148fe03
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Previously matched Qt.platform.os, however that can only provide one
string. Multiple selectors can be present at once, so we can provide
both unix and linux instead of having to pick the most specialized one.
Task-number: QTBUG-34796
Change-Id: I219517d740fa7385e923a9e09cb7e241378fbaee
Reviewed-by: David Faure <david.faure@kdab.com>
This is used by QML comboboxes, menu buttons, etc.
Task-number: QTBUG-31420
Change-Id: I6d3f32fd80ce91c4be34eae636d1b95a4e251a49
Reviewed-by: BogDan Vatra <bogdan@kde.org>
!build_all is a sufficient condition for bundling headers in both debug
and release configurations, as it means that we will likely make only
one of the builds, and that needs to be self-contained.
Task-number: QTBUG-34575
Change-Id: I1a19e4b619eeff207cfbfd50d3b761053aeaa667
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Up to now, the feature classe Uniform Initialization was subsumed by the
Q_COMPILER_INITIALIZER_LISTS flag together with support for
std::initializer_list.
This caused at least two problems:
1. On QNX, the standard libray does not ship <initializer_list>, even
though the compiler (a GCC 4.6, IIRC) supports it. But since there
was only one Q_COMPILER flag for both, support for the compiler-only
part of the feature had to be disabled, too.
2. MSVC 2013 supports initializer lists, but has a bug that renders full
uniform initialization support, as required for QUuid, useless.
By splitting the feature into two, we can separate them better, and do
so in QUuid, which is the only class that currently takes advantage of
uniform initialization (to provide constexpr constructors).
Since Q_COMPILER_INITIALIZER_LISTS worked as a flag for uniform
initialization so far, with the two known exceptions above,
UNIFORM_INIT is defined whenever INITIALIZER_LIST is, except that
I don't revert UNIFORM_INIT on QNX as I do for INITIALIZER_LISTS
and that I expect the MSVC 2013 features to set INITIALIZER_LIST,
but not UNIFORM_INIT.
Task-number: QTBUG-34705
Change-Id: I81916e950a0f3aab3de7977e0326d2de3d31b14c
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A RESET function is only needed if the default value of the property
cannot be set with the normal setter. This is not the case here, as
clear() is the same as setKeySequence(QKeySequence()).
Change-Id: Ib751677436ebdcec0a7951dceae1e0f0323500ff
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When EnumForms was used then the dmPaperSize was not always correct for
the custom paper sizes available on some printers. By using
DeviceCapabilities we can be sure that the information is correct in this
respect.
This also fixes respecting of the custom paper size if one is given and
there is no corresponding existing paper size for it.
Task-number: QTBUG-34276
Change-Id: I9924d5be8527027fc434261e37f6c7aae66210c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
- Replaced all \l instances that were using
the html file name qualifier to link to a \target.
- Updated the linking instructions to not mention
the html file name way to link.
Task-number: QTBUG-32173
Change-Id: Ic3e266e58de7566d533bbc7fbec7ff5c3ec8f231
Reviewed-by: Nico Vertriest <nico.vertriest@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
After b7440536c7, we no longer
restart the input method when the keyboard is shown, even if
the parameters for the input method has changed. The effect
was that if you had opened a keyboard with, say, digits only, then
all keyboards would be digits only forever, regardless of the
settings on text input.
This patch tries to be conservative, so it only adds back the
restartInput() logic when any of parameters have actually
been changed. Tested the code the original patch was made to
fix and it still works as before.
Task-number: QTBUG-34827
Change-Id: Icaee6026d5c3e95b605bb76485acf4fd651f81bd
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
An int is not a proper representation for a QTimeZone, so don't provide
an implicit conversion from it. OTOH, {QByteArray, int, QString, QString}
_does_ nicely represent a QTimeZone, so explicitly state the implicitness
of that constructor so {}-init continues to work in C++11.
Change-Id: I865a6b38b8ab3c577625b7b08efbfc98914abfbe
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The whole QTimeZone class is \since 5.2.
Change-Id: I681b924b534f2f75315b2eaf506aaa7d9590efa1
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This enables specialisations of (std and q) swap using member-swap
and declares the types movable for efficient use in Qt containers,
and QList in particular.
This is a binary-incompatible change, so cannot wait for 5.2.1.
Change-Id: I431315e148b95f82dc3d4471c57ef729539dca9f
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Since the Qt input method queries only give us information
on the position within the block, moving to the same position
in a different block will be interpreted as not moving.
The quick fix is to send a fake position before the real one in
this case.
Task-number: QTBUG-34845
Change-Id: I5d62bdffc283e41d0384c60a0b69c01811caa629
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This is customary for Qt value types these days.
Change-Id: If5374c2595a904337eaef4afc08cdc993229ac25
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use the same variable in QAndroidPlatformWindow.
Task-number: QTBUG-34764
Change-Id: Idf33707e81cf7306663196f3c17735d8dc1dde5d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This will make Qt Quick use consistent timing which
prepares animation frames for the time they go to
screen, rather than the current time at the time of the
animation tick, which can be quite jerky in many situations.
Change-Id: I1bbd4394db0c757553ee406d416fccb3ef937db8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
as this new cache category comes without side effects, we can
unconditionally create a cache whereever we are. this allows us to be
performant without explicit user action.
Task-number: QTBUG-31340
Change-Id: I6b88b20b61e8351aa8cbf94ad3eec65adac6e1d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
unlike .qmake.cache & co., the presence of this file has no magic
effects on where mkspecs, modules and other things are searched.
as the obvious name "cache" is of course already taken, we call it
"stash".
the file is searched up to the super cache (if present), otherwise up to
the normal cache/conf (if present), otherwise up to the root.
if it's not found, it is created next to the super cache (if present),
otherwise next to the cache/conf (if present), otherwise in the current
output directory.
note that the cache really should be created and populated by the
top-level project if there are subprojects: otherwise, if there is an
"anchor" (super/cache/conf), subprojects would race for updating the
cache and make a mess. without an "anchor", each subproject would just
create its own cache, kind of defeating its purpose. this is no
different from the existing "cache", but it's worth mentioning that
removing the "anchoring" function does not remove the "nesting order"
constraint.
Task-number: QTBUG-31340
Change-Id: I786d40cef40d14582a0dd4a9407863001bec4c98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
otherwise, if the output dir is the root, the path would be denormalized.
the code for finding existing files already does that.
Change-Id: I56d70477e9c9ffcd936325068624a84df10ffd87
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The findFile would need to look though all include
paths the compiler is supporting, which can be very hard
to support for multiply compilers. It is way easier to
use a compile check to catch all include paths the
compiler supports. This fix is needed to find correctly
ICU under QNX.
Task-number: QTBUG-34743
Change-Id: I4f755042a76882b304b058355cf54e37b25df61d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is done to autodetect Neon support for QNX.
It might make sense for other platforms as well,
so enable the compile check for all target platforms.
Task-number: QTBUG-34743
Change-Id: I1d149d1942ce0caa288cb56491e4a0ba455dda7d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Some compile checks may depend on the architecture,
e.g., NEON is only available for ARM, so it makes no
sense to check it for this architecture. Therefore
we need to run the architecture check before we
auto detect settings.
Task-number: QTBUG-34743
Change-Id: I53208d25b0ae0fd93cccc7394307b8ee286576a2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Disables implicit conversions from QImage to QOpenGLTexture.
Change-Id: I09b4d236dde8eae5258e6a954f4e02b4451990bd
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Disables implicit conversions from Target to QOpenGLTexture.
Change-Id: I2edd2dc4528a311577f0b7df4f6ce22696336a88
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
A move constructor cannot be added because the class uses
a smart pointer to hold its pImpl, so the move ctor would
have to be out-of-line, destroying BC between C++11 and C++98
versions of Qt.
Member-swap is required for Q_DECLARED_SHARED, which in turn
enables efficient use of the class in Qt containers by marking
it movable.
Change-Id: I1aaa5bf3343a92e621d9464d8e4352f4e5ceff1f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
