Since it's possible to call the function on an
empty model, return failure in that case.
Change-Id: I0a0eabe917da3e6294bdd616a85579f6dc894ec8
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
XI2 sends events for individual touch points, but QTouchEvent
sends all of them with a stationary state if they didn't change.
If a touch pressed event is received, and the next XI2 event
is about a different touch point, we wouldn't update the state
of the previously pressed touch point.
Change-Id: I1ebcbea1cea54872064ef7710e2aac7b0b41cd70
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
C99 defines the "I" macro in complex.h. qobjectdefs_impl.h can be
indirectly included in user code, which raises the possibility of a name
clash if the user's compiler supports C99 and the user includes
complex.h
Change-Id: Ie79ec7baf2d49a34b66a01556c7e57324303dc04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tests use local coordinates, but window->geometry() gives the
global position on the window, i.e. offset by the size of the
decoration.
Change-Id: Id63ffd7e160b77ddb0f5563d8c3c65c36ad45e89
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We don't use exceptions anyway, so we can safely ignore this warning.
Task-number: QTBUG-32833
Change-Id: Id78cb99770f37a076de3a95721ba40795a8a7b57
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
We kept using qInstallMsgHandler in testlib to not break test cases using
it too. However, this breaks tests using qInstallMessageHandler ...
ChangeLog: QTestLib: Test cases have to use qInstallMessageHandler instead
of the (deprecated) qInstallMsgHandler
Task-number: QTBUG-32391
Change-Id: I3bd95d9b0a48749243a5dd3e074df8ebcbc07dce
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Windows configure does not have -device-option yet.
A hack for android already generated the
qdevice.pri. But it did this even if no android
was build, so merged the device-option with the
android generation of qdevice.pri. The qdevice.pri
is generated earlier in the configure steps than
before to match the linux configure and allow
to set device options before the config.tests
are run.
Change-Id: I753cf0d5eba1479792a685d6e1f5acb38b970893
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in scanning any of it.
qdoc already excludes itself (and will hopefully move out of qtbase
soon), so not adding it here.
Change-Id: I84356c0988be386de331bb7879b3ebd2108526a2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
under normal circumstances, any errors will be noticed already by the
pkg-config --exists call, which is silent anyway. therefore this doesn't
change anything in normal qmake usage.
however, lupdate's and creator's evaluators skip the --exists calls and
subsequently invoke the normal query, which then prints useless noise to
the terminal.
Task-number: QTBUG-28159
Change-Id: I536412060f3830aafeb0587f855cd6af11227bca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
whatever it was used for is long gone.
Change-Id: Ifab7ae7968b1ab65982b1a6414274b3502bbc3d0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Optimize the parser of the X11 compose tables. Parsing these was
responsible for over 90% of the startup time in Qt 5.1.
Change-Id: Ifddc3f30828791e51a755f92791c26ffe43a9cd3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Windows CE 5 and the depending Windows Mobile
is not supported.
Change-Id: I81b9599f837590a1375b6340e58c47b478c079ba
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Sections may be hidden => QStyleOptionHeader::position must reflect the
state seen on the screen. Otherwise styles will give wrong visual
results.
Task-number: QTBUG-32203
Change-Id: I7ef86496be092bf6f52ec45f757b501f38c3a431
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
To avoid using modifier keys when releasing a two-finger
mouse wheel flick on a trackpad, we listen to event
phases. But for a normal mouse, a separate phase
NSEventPhaseNone is given. Ensure that we still send
modifier keys when that state is reported.
Task-number: QTBUG-32098
Change-Id: Ib840dd661b7842ae49127e5a8d42e3666ae2da4e
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
We just need one digest algorithm, any algorithm, to generate a
somewhat unique identifier. SHA-1 will suffice.
Change-Id: I3cb26bf866d616df3ef32feace10934f19daa1a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A QWindow should keep its title after removing and restoring the
frame, so set it if we are setting window flags that include a frame.
Task-number: QTBUG-32978
Change-Id: I0fe1b651eac05a210b06ec4f7f6fb78f2536834d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This patch fixes the issue when the escape '\' character was
interpreted as a compose value.
On the whole en_US.UTF-8 Compose file it only affects the following
sequences:
<dead_diaeresis> <space> : "\"" quotedbl # REVERSE SOLIDUS
<Multi_key> <slash> <slash> : "\\" backslash # REVERSE SOLIDUS
<Multi_key> <slash> <less> : "\\" backslash # REVERSE SOLIDUS
<Multi_key> <less> <slash> : "\\" backslash # REVERSE SOLIDUS
By coincidence the last 3 sequences were working even before this fix.
Task-number: QTBUG-32972
Change-Id: Ia4fc2156d982cf2918d0d1be6ee07706cfbfd091
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Removed the Boxes example from the list as it requires
OpenGL.
Task-number: QTBUG-32953
Change-Id: Ieb186afde0a87b12d7ab48037b31ae5895740d60
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Invoking waitForStarted() on a QProcess before or after an unsuccessful
call to start() (e.g., with an empty command), would execute FD_SET with
an invalid file descriptor and cause the process to abort.
The bug can be reliably reproduced on OSX.
Task-number: QTBUG-32958
Change-Id: Id25b7781168489281645e21571361ca1a71d43e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Set the SONAME to the library name without the major
version number appended, as android does not have the versioned
symlinks.
Change-Id: I41c504869019a393a3f112b2f7fc81c7ad5afa1c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The tryShortcutOverride function needs to be called with the
focus object. The same logic is in QGuiApplication::notify.
Applications with QGuiApplication would therefore handle
ShortcutOverride correctly where QApplication would not allow the
override.
ChangeLog: Fixed ShortcutOverrid for QtQuickControls.
Now it is possible to assign a shortcut such as "b" and still type "b" in text inputs.
Task-number: QTBUG-32928
Change-Id: I4f4ab82fd11f45174a4483a01bbbe8143dfe0724
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
On Linux (XCB), resizing a dialog shifts its position. The fix corrigates
the geometry of the dialog to the right values.
Task-number: QTBUG-32473
Change-Id: I6d38539a3ebc3b95eacc7f13a76f83fc9e4d821c
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
sed versions other than the GNU one often default to being POSIX-compliant,
in which case "+" (with and without escaping) is always an ordinary
character.
Achieve the same functionality in a way that works with both GNU and BSD
seds by using "xx*" insted of "x\+".
Change-Id: I1d2576a8c0e17b31f01a44d9632c57991e53780d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
both variables are available class-wide anyway.
Change-Id: I97c13de9ead44638e9310b62f02d8cd1c910df94
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
well, not really - qt_parts.prf will still create one, but it will be
empty.
apart from being cleaner, this now finally makes it possible to load an
unconfigured qt source tree into qtcreator without random parts of the
tree being missing from the project explorer.
Change-Id: Ida7ee77ecb450af05bfa66106caf2067b02f1a7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's not necessary. it was an artifact of a misguided approach to making
qdoc aware of the qt installation dirs.
Change-Id: I5ff363c8400d17698bf715e70b904aa69f71f0d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's no good idea to #if 0 the opening brace but comment out the closing
one.
Change-Id: I6f9ca8f14f0dc82fb22df85de547564336ed0476
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
