Error out if it's missing or broken (Mersenne Twister not present).
This ensures that we never have a low-quality random generator in Qt.
Change-Id: I0a103569c81b4711a649fffd14ec80649df7087e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Auto-reset events are automatically reset to non-signaled when we get
notified about the signaled state. This implies that we cannot check the
event state again in activateEventNotifiers. Instead, store the signaled
state in a QAtomicInt and test and decrement that.
This amends commit 85403d0a.
Task-number: QTBUG-63555
Change-Id: I0adee3d2929783f98d91060f9106c8b5266d72fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We're not going to crash to avoid core dumps getting recorded by
systemd, filling up filesystems or showing dialog boxes. We just need to
exit without running destructors. Now, exit() isn't supposed to run
function-scope destructors, so just in case we use _exit().
Change-Id: I0b48fc8e90304e0dacc3fffd14e909ff248ce1a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
<future> is needed by QThread::create. Instead of a fragile series
of preprocessor tests, move its detection to a configure test.
This dramatically simplifies the code, but on the other hand ties
the availability of QThread::create() to the system used to compile
Qt (rather the one used to compile an application).
Change-Id: If1b06363379bf29126cfa68f2a0651cbb78a67f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commits aba336c2b4 (in Qt 5.2) and
aba336c2b4 (in 5.6) both tried to deal
with this problem, with different levels of success. This is the third
attempt (and hopefully the charm).
Instead of modifying the path that the user provides, go straight ahead
and declare it invalid. This is supported by RFC 3986, which declares
this expansion impossible:
relative-part = "//" authority path-abempty
/ path-absolute
/ path-noscheme
/ path-empty
path-abempty = *( "/" segment )
path-absolute = "/" [ segment-nz *( "/" segment ) ]
path-noscheme = segment-nz-nc *( "/" segment )
The "path-abempty" and "path-noscheme" cases are the two issues we
already handle. This commit adds the third one: path-absolute, which
requires that the first segment of the path be of non-zero length.
That is, it is now possible again to have http://example.com//path
constructed piece-wise, without it producing http://example.com/path.
Additionally, it catches the case of http://example.com//path parsed
from full URL then followed by setAuthority("").
Change-Id: I69f37f9304f24709a823fffd14e67a5e7212ddcd
Reviewed-by: David Faure <david.faure@kdab.com>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When many runnables are executed, this improves the
performance by not resizing the queue for each runnable,
which was the case in the previous version, because of
many calls to QVector::takeFirst().
Also add a test that makes sure tryTake() is safe to
call and does not leave the queue in a bad state that
tries to use nullptr entries.
Change-Id: I608134ecfa9cfc03db4878dcbd6f9c1107e13e90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids looping prior to the main 16-byte loop, by performing one
load that may include bytes prior to the start of the string. This is
guaranteed not to fault, since str points to a valid character, but it
may cause Valgrind to print warnings.
Change-Id: I6e9274c1e7444ad48c81fffd14dcae854bba24b2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"generate" is better than "get", and we already have "generate(it, it)"
which uses std::generate(). This changes:
- get32() → generate()
- get64() → generate64() and QRandomGenerator64::generate()
- getReal() → generateDouble()
Change-Id: I6e1fe42ae4b742a7b811fffd14e5d7bd69abcdb3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
For self-consistency with QSharedPointer and minor consistency
with std::unique_ptr (although QScopedPointer isn't movable, so we
can't claim STL compatibility with it).
[ChangeLog][QtCore][QScopedPointer] Added get().
Change-Id: Ib58f936afa0e0d5bce57a61d1467b69956f37ceb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In data(), index belongs to the proxy, not to the source. It needs
to be mapped back to it first.
Change-Id: Ie5dcbf13166dadf62f3d85b594d3227383132521
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
One example is VxWorks.
Change-Id: I253df715a9417c1f9cede79b1e1860924e0da8a9
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Performance is more important in this case than the theoretical benefit
of constexpr. This commit implements the SSE2 search for 16-bit null and
it might be possible to implement the equivalent for AArch64
(investigation required). It also adds a fallback to wcslen() for
systems where wchar_t is short (non-x86 Windows or 32-bit x86 build with
-no-sse2).
We can re-add the constexpr loop once the C++ language has a way of
overloading constexpr and non-constexpr. GCC has a non-standard way to
do that with __builtin_constant_p, which is also implemented in this
commit, but note that the inline function is still not constexpr.
Change-Id: I6e9274c1e7444ad48c81fffd14dcaacafda5ebdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some valid UTF-16 characters cannot be expressed in XML 1.0 and a
QString may contain invalid unicode. In both cases we should not write
the respective data to the output stream, as that generates invalid XML,
which then cannot be read back by QXmlStreamReader. In addition we
should report an error if we encounter them.
The change filters the incorrect strings from the output and introduces
an "encodingError" flag which is reported from hasError().
[ChangeLog][Important Behavior Changes] Characters invalid in XML, such
as 0x0 or 0xfffe, as well as strings containing unmatched UTF-16
surrogates are now suppressed from the output of QXmlStreamWriter and
cause the error flag to be set.
Task-number: QTBUG-63150
Change-Id: Ia29bab768fed9681dd68e8934da2a7e3fcdfc3cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMacAutoReleasePool is backed by an NSAutoreleasePool, which documents that
"you should always drain an autorelease pool in the same context (invocation
of a method or function, or body of a loop) that it was created".
This means allocating QMacAutoReleasePool on the heap is not a supported
use-case, but unfortunately we can't detect it on construction time.
Instead we detect whether or not the associated NSAutoreleasePool has been
drained, and prevent a double-drain of the pool.
Change-Id: Ifd7380a06152e9e742d2e199476ed3adab326d9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QFileInfo] Relative symbolic links on Windows are
now resolved to their absolute path by symLinkTarget().
Task-number: QTBUG-62802
Change-Id: I5826517130bd389aef994bf3f4b6d99b2a91b409
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Since MSVC doesn't have <chrono> (according to QT_HAS_INCLUDE), the QSKIP
in the test was printed for every line in the table. Instead, add the
skip in the _data() function.
Change-Id: I6e9274c1e7444ad48c81fffd14dbcee5e5a322aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Consider the following:
/root/target - a file
/root/path/link -> ../target
/root/path/other/exe - executable
Running from /root/path/other.
exe is:
#include <QDebug>
#include <QFileInfo>
int main()
{
qDebug() << QFileInfo("../link").symLinkTarget()
return 0;
}
The link references /root/target, but the current output is
/root/path/target.
The link doesn't depend on the PWD. It depends on its own directory.
Change-Id: I61e95018154a75e0e0d795ee801068e18870a5df
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That means a file is never created, unless you ask for the name. There's
no chance of left-over temporary files being left behind. QSaveFile also
benefits from this, since the save file is not present on disk until
commit(). Unfortunately, QSaveFile must go through a temporary name
because linkat(2) cannot overwrite -- we need rename(2) for that (for
now).
[ChangeLog][Important Behavior Changes][QTemporaryFile] On Linux,
QTemporaryFile will attempt to create unnamed temporary files. If that
succeeds, open() will return true but exists() will be false. If you
call fileName() or any function that calls it, QTemporaryFile will give
the file a name, so most applications will not see a difference.
Change-Id: I1eba2b016de74620bfc8fffd14cc843e5b0919d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test sets up two timers:
- a 100ms recurring timer
- a series of 10 200ms single-shot timers.
After quitLock lets exec() return it then uses a signal
spy to check if the 100ms timer fired at least 17/20
of the times it should.
However there is no guarantee that the 100ms timer
will fire more often than the 200ms timer. If the
native timer callbacks happen at 500ms intervals then
Qt will fire both timers (once) at that interval.
In practice this seems to happen on macOS CI under
system load and/or with the test app napping.
The primary goal for the test is to verify that exec()
returns when it should; we can remove the timer signal
spy.
Remove testQuitLock from BLACKLIST.
Timely timer:
524429311.389913 runLoopTimerCallback
524429311.389979 200ms fire
524429311.389997 100ms fire
524429311.490056 runLoopTimerCallback
524429311.490130 100ms fire
524429311.589752 runLoopTimerCallback
524429311.589929 200ms fire
524429311.589976 100ms fire
Delayed timer:
524429428.690887 runLoopTimerCallback
524429428.691002 100ms fire
524429428.691143 200ms fire
524429433.692103 runLoopTimerCallback
524429433.692205 100ms fire
524429433.692331 200ms fire
Change-Id: Iff4faaa1de3741cf4e217949d5ed17d4e70c6af2
Task-number: QTBUG-61499
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On BSD systems (tested on macOS and FreeBSD), you *can* lseek(2) or
ftell(3) on a pipe and get its current position. But QFile will not get
the position when the file is sequential, so we need to return 0.
Technically speaking, we ought to do the same for block devices, but if
you're redirecting stdin, stdout or stderr in the unit test to or from a
block device, you deserve the extra work to add that yourself to the
test.
Change-Id: I3868166e5efc45538544fffd14d8a74e92963fe7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If a QFileInfo was constructed with an empty path, which could happen
with QFileInfo(QFile()) or via QDir, etc., then it would issue system
calls to empty paths and could even produce warnings. This commit makes
am empty path name be the same as a default-constructed QFileInfo and
corrects the use if 0 for ownerId and groupId to match the
documentation.
[ChangeLog][Important Behavior Changes] QFileInfo on empty strings now
behaves like the default-constructed QFileInfo. Notably, path() will now
be the empty string too, instead of ".", which means absoluteFilePath()
is no longer the current working directory.
Change-Id: I8d96dea9955d4c749b99fffd14ce34968b1d9bbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
The Unix stat fields "st_ctime" and "st_ctim" mean "change time", the
last time that the file/inode status fields were changed. It does not
mean "creation time". So this commit splits all of the internal API to
"birth" and "metadata change" instead of "creation" to avoid the
conflict.
Change-Id: I149e0540c00745fe8119fffd1463fe78b619649e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QFileInfo] Deprecated created() because it could
return one of three different file times depending on the OS and
filesystem type, without the ability to determine which one is which. It
is replaced by metadataChangeTime() and birthTime().
[ChangeLog][QtCore][QFileInfo] Added QFileInfo::metadataChangeTime(),
which returns the time the file's metadata was last changed, if it is
known, and falling back to the same value as lastModified() otherwise.
On Unix systems, this corresponds to the file's ctime.
[ChangeLog][QtCore][QFileInfo] Added QFileInfo::birthTime(), which
returns the file's birth time if it is known, an invalid QDateTime
otherwise. This function is supported on Windows and on some Unix
systems.
Change-Id: I0031aa609e714ae983c3fffd1467bd8b3e3a593d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is required so that one can use QSettings in situations that
temporary files or renaming may not work.
[ChangeLog][QtCore][QSettings] Added setAtomicSyncRequired(), which
allows one to use QSettings with config files in unwriteable directories
or in Alternate Data Streams on NTFS on Windows. This used to work
before Qt 5.4, but remains a non-default behavior due to the potential
of data corruption.
Task-number: QTBUG-47379
Change-Id: I81480fdb578d4d43b3fcfffd14d4f77112f0402f
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
We can't use MoveFile to do atomic commits on an ADS, so QSaveFile needs
to detect when the target name is ADS and then use the direct fallback
mode.
[ChangeLog][QtCore][QSaveFile] Saving to Alternate Data Streams on NTFS
on Windows is now possible, but requires setDirectWriteFallback(true).
Task-number: QTBUG-47379
Change-Id: I81480fdb578d4d43b3fcfffd14d4bc062ae1750d
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
So we can use it in QTemporaryFile, QTemporaryDir and QFile::rename()
[ChangeLog][QtCore][QTemporaryDir] The class now supports the "XXXXXX"
replacement token anywhere in the template, not just at the end. This
behavior is similar to what QTemporaryFile supports.
Change-Id: I1eba2b016de74620bfc8fffd14ccb645729de170
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A nullptr QVariant should become a null QString or QByteArray,
since null strings have previous in our APIs represented the null value
in the absence of a dedicated null metatype.
Change-Id: I3b8f6386ece314d7c196959fbcf042c4fe0508a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Actually check that there's a T where ISO 8601 wants it (instead of
just skipping over whatever's there), with something after it; move
some declarations later; add some comments; and use the QStringRef API
more cleanly (so that it's easier to see what's going on). Simplify a
loop condition to avoid the need for a post-loop fix-up.
This incidentally prevents an assertion failure (which brought the
mess to my attention) parsing a short string as an ISO date-time; if
there's a T with nothing after it, we won't try to read at index -1 in
the following text. (The actual fail seen had a Z where the T should
have been, with nothing after it.)
Add tests for invalid ISOdate cases that triggered the assertion.
Change-Id: Ided9adf62a56d98f144bdf91b40f918e22bd82cd
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changes the QVariant::isNull() implementation for
pointer types so they return true if null.
[ChangeLog][QVariant] QVariants containing pointers will now return
true on isNull() if the contained pointer is null.
Change-Id: I8aa0dab482403837073fb2f376a46126cc3bc6b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore] Added qEnvironmentVariable, which returns the value
of an environment variable in a QString, while qgetenv continues to be
used to return it in a QByteArray. For Unix, since most environment
variables seem to contain path names, qEnvironmentVariable will do the
same as QFile::decodeName, which means NFC/NFD conversion on Apple OSes.
I opted not to #include <qfile.h> from qglobal.cpp to implement that
QFile::decodeName functionality, so qglobal.cpp doesn't depend on
corelib/io and to avoid possible recursions.
Task-number: QTBUG-41006
Change-Id: I14839ba5678944c2864bffff141794b8aaa7aa28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
don't try to execute a binary from the install dir.
amends 8e776d39f.
Change-Id: I37990bc83b295379f0c93f4ca712e1bbf980fd44
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Allows setting the stack size for the thread pool
worker threads. Implemented using QThread::stackSize.
Task-number: QTBUG-2568
Change-Id: Ic7f3981289290685195bbaee977a23e0c3c49bf0
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Update documentation to be clearer on the special null variant state
with no value as opposed to a variant with a null value, and only block
conversions of the former.
Change-Id: I24fd50285414e049de87de54a63700a89bd5adf1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check we do handle DST after epoch and don't before.
Check we do notice various unusual transitions.
Check we do handle non-whole-hour-offset zones.
(Unfortunately, MS-Win lacks data for some of the zones and is wrong
about the two date-line crossers, so we skip those for it.)
Change-Id: If420d61b9db7f914ca25c22297c16e917ad2307a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
Task-number: QTBUG-8819
Change-Id: I3061811c18e669becf9de603bbdd7ba96e4d2fcd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Split the test in two: one test that requires the symlinks
and test files and one that does not need them.
In the test with test files, verify each step and the deletion
of the files.
Task-number: QTBUG-58654
Task-number: QTBUG-50835
Change-Id: I14de57ce7a1df2d834d5a7565c804dead1d89088
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This needs a zone with transitions near the epoch; and the only CET
with DST that winter was Italy (copied by Malta), for which the Olson
database had a recent (2016) correction to its data, for that winter.
That means we get inconsistent results on O/Sen of different ages.
So add a separate testEpochTranPrivate(), alongside testCetPrivate(),
and test it with America/Toronto. (Unfortunately, MS-Win gets the
date wrong on the first transition after the epoch, so we have to code
round that.)
Since information before the epoch isn't reliably available, only test
the search backwards if nextTransition does find something before it.
(We can safely assume all real transitions happened since 1601;
non-celestial time-keeping wasn't accurate enough, before that, for
anyone to synchronize with anything but celestial time.)
Change-Id: I984b46938a2805b93bb2afd6855e317b5d66b386
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found while working on suppressing the warning about the return value
(which is either 0 or -1) was being ignored.
Task-number: QTBUG-61968
Change-Id: I02d22222fff64d4dbda4fffd14d148b1724547ca
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 346cd79192. The bug
report was incorrect, since the suggested file name is actually valid,
it just happens to name an Alternate Data Stream (ADS) "20:803Z.txt" in
file "testLog-03".
[ChangeLog][QtCore][QFile] Reverted an incorrect change from Qt 5.9.0
that forbade the creation and access to Alternate Data Streams on NTFS
on Windows. This means that file names containing a colon (':') are
allowed again, but note that they are not regular files.
Task-number: QTBUG-57023
Change-Id: I81480fdb578d4d43b3fcfffd14d4f2147e8a0ade
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Currently QLocale::c().bcp47Name() returns "C" which, according to [BCP47], is
not a valid language tag. In particular it does not conform to the ABNF grammar
in section 2.1 which specifies a minimum length of 2 characters for all language
tags.
[BCP47]: https://tools.ietf.org/html/bcp47
This patch changes the return value to "en" seeing as the documentation for
QLocale::Language states that the C language is identical in behavior to
English.
Task-number: QTBUG-61949
Change-Id: I2a381def8fb7156467e01d105da92bb1f4821204
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When QCOMPARE(,) reports two 12-digit numbers, it's not always
immediately obvious what the difference is (much less what 1/3600000
of it is); nor is it obvious that (or why) a given 12-digit number is
in fact correct. In contrast, our eyes can make sense of a
QDateTime's reported value quite well, enabling us to see what's
different; and it's possible to at least confirm the plausibility of
2-or-3 am on a spring or autumn day at a plausible transition (or even
to confirm it exactly by consulting suitable web-sites). Also
document the actual transition happening in each case (since I *did*
consult a suitable web-site). So prefer to QCOMPARE(,) two QDateTime
values instead of two 12-digit qint64s.
Where a that would be unsuitable, at least compare the difference to
zero, to make the error easier to understand (except when one of the
twelve-digit numbers consists entirely of 9s; that, for once, actually
is easy to see).
Write various multiples of 3600 as the relevant intelligible whole
number times 3600, rather than premultiplying, to make it obvious to
reders what's going on.
None of this changes what is actually tested.
Change-Id: I488e751283a55d4623c93612af13ad631144900d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A loop initialized i = 0 and used i > 2 as its condition; it didn't
get very far. Consequently, the test it was in never checked whether
CET's 2011 transitions happened at the times expected - which they
didn't, as the times in question were in fact the times at which
Pacific/Auckland had its transitions that year.
Change-Id: I94d1f8df615c5bcfe48e73d41b4c7faf2beccb96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make QVariant::toJsonValue do conversions as well as
QJsonValue::fromVariant.
Change-Id: I175d43677061470691e2e0104a800be355fbbd3d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test verifies processEvents(WaitForMoreEvents)
behavior by first processing all pending events (in
a loop) and then verifying that a following processEvents
call actually waits.
But there is no guarantee that the OS won’t introduce
more events after the first loop has completed. This
does indeed seem to happen on recent versions of macOS.
Change the test to not require that the processEvents
call blocked and de-blacklist.
Task-number: QTBUG-61131
Change-Id: Ic8fa74a6085165442791264f6f137a2fa6083138
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QVariant claims to be able to QVariantHash and QVariantMap, but the
actual conversion implementation is missing.
Task-number: QTBUG-61471
Change-Id: I0cba74642aa77dc423effed289bc7619922a89eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that QFileDevice::setFileTime() provides a portable way to prepare
our test file, we can verify QFileInfo does handle the distant past,
notably including negative time_t values. The old MS-specific code
used a time back in 1601, which we can't hope to support
cross-platform, so use one in 1901 that's a little inside the range of
32-bit time_t.
Task-number: QTBUG-47985
Change-Id: I2de3e79d8c7864221f92395813b63f373e4d8a3b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output didn't previously make clear that the datum was invalid.
It's now explicitly invalid. At the same time, use QDebug's space()
and nospace() methods to make spacing choices explicit.
Revised a QDate test to match.
Change-Id: I4699f5897530b4caa31c22fdb07de149832b30f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Separate the part varying between tests from the common form of all
the tests, so the reader can see the common pattern and know for sure
that there's not a typo or copy-and-paste glitch.
Change-Id: I3145a26ab42c104eb27756d906ac87f937024bad
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QLocale] Fixed the conversion of QTime to string
form and parsing from string form to always treat the value as the
decimal fraction of the seconds component. That is, the string format
".z" produces/parses ".2" for 200 milliseconds and ".002" for 2
milliseconds. Use of "z" or "zzz" is discouraged outside decimal
fractions to avoid surprises.
Task-number: QTBUG-53565
Change-Id: Ia19de85ad35e4eb7bb95fffd14792caf9b4a5156
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QWindowsFileSystemWatcherEngine uses one change notification
per directory to watch directories or files within that
directory. Adding files and their directories in a sequence
caused the value in QWindowsFileSystemWatcherEngineThread::HandleForDirHash
to be overwritten.
Relax the check for the flags (watcher attributes) to use >= and recreate
the change notification of a directory should its flags be insufficient.
This triggers when a file is added after its directory since files
require more attributes.
Task-number: QTBUG-61792
Change-Id: I371a72f1934fa82c53aaf84beb907825031f1c81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixed crash on QCoreApplication::translate() call from qqmlThread while
QCoreApplication::{install,remove}Translator() is called from the GUI
thread.
[ChangeLog][QtCore][QCoreApplication] Calling
QCoreApplication::translate() is now thread-safe.
Task-number: QTBUG-57095
Change-Id: Ie5340a42040a829f311c01332e05d4bbaf60462c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since the result is an actual zero, this section of code looking for
underflows kicks in. But we forgot to take the capital letter into
account when parsing the number.
Task-number: QTBUG-61350
Change-Id: Ia53158e207a94bf49489fffd14c6abbd21f0bac0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
tst_QLocale::macDefaultLocale() was determining local-time's current
offset from UTC and using it when working out what to expect the
offset at 1:2:3 today to be. When a transition happens after 1:2:3 on
its day (which is usual for DST changes in Europe), this lead to using
the new offset to test a time before the transition; the test was thus
wrong and failed.
Use the time to be tested (and current date) to compute the offset to
use, instead of using the current date-time.
Change-Id: I1c02a5579bca859e1d1aeb4f45b24871a08287af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qemu uses some memory for each generated thread. This test creates
> 80000 threads and consumes about 10Gb of memory which is too
heavy for a VM.
Task-number: QTBUG-59966
Change-Id: I1bb8a0d7955778f5201948b41befcb9f1f391514
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The getentropy function, first found in OpenBSD, is present in glibc
since version 2.25 and Bionic since Android 6.0 and NDK r11. It uses the
Linux 3.17 getrandom system call. Unlike glibc's getrandom() wrapper,
the glibc implementation of getentropy() function is not a POSIX thread
cancellation point, so we prefer to use that even though we have to
break the reading into 256-byte blocks.
The big advantage is that these functions work even in the absence of a
/dev/urandom device node, in addition to a few cycles shaved off by not
having to open a file descriptor and close it at exit. What's more, the
glibc implementation blocks until entropy is available on early boot, so
we don't have to worry about a failure mode. The Bionic implementation
will fall back by itself to /dev/urandom and, failing that, gathering
entropy from elsewhere in the system in a way it cannot fail either.
uClibc has a wrapper to getrandom(2) but no getentropy(3). MUSL has
neither.
Change-Id: Ia53158e207a94bf49489fffd14c8cee1b968a619
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It breaks sth in QLocalSocket which is used in QtRemoteObject.
This reverts commit 5c6210e345.
Task-number: QTBUG-61668
Change-Id: Ib11890923773496e5d998b7709ef93b0a839a759
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Follow the pattern used to guard Private::sort() calls elsewhere in the
class.
Because QAbstractItemModel::sort() is not called in the unit test, the
content is not sorted after resetting.
[ChangeLog][QtCore][QSortFilterProxyModel] QSortFilterProxyModel
now does not emit an unnecessary layoutChanged() following a model
reset.
Change-Id: I0a36c7fbb172bdd06ecddb489c5595debbef6cb9
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Makes the qle_bitfield template more generic and moves it to qendian_p.h
It is also hardened to be more reliable.
Change-Id: I53214ec99cceee4f5e8934ae688c99e555a5fb42
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid the dimensions of the rounded QRect being off by more than one
pixel. This ensures the aligned containing rect also contains the
rounded rect.
Task-number: QTBUG-56420
Change-Id: Ib79110e51ab80de2dc83d01ea83fc5fbf3852e75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
[ChangeLog][QtCore][QWinEventNotifier] QWinEventNotifier is not
restricted to 62 instances anymore.
Task-number: QTBUG-8819
Change-Id: I2c749951453a4b699cc50dada0d6017440b67a4a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
GCC didn't support it until version 5 or 6, so add configure tests for
both <random> and <sys/auxv.h>. Normally I'd say "upgrade", but this is
too low-level and important a feature.
There's a good chance that all our supported compilers have <random>
anyway. As for <sys/auxv.h>, it's present on Glibc, Bionic and MUSL, but
I don't see it in uClibc (AT_RANDOM is a Linux-specific feature).
Change-Id: Ia3e896da908f42939148fffd14c5b2af491f7a77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The serialization of date-times understood time-zones (indicated by a
't' in a format string) but the parsing didn't (so viewed the 't' as a
literal element in the format string, not matched by the actual zone
it needs to parse), although some tests expected it to.
This made round-trip testing fail.
Implemented parsing of time-zones.
Re-enabled the formerly failing tests.
[ChangeLog][QtCore][QDateTime] Added support for parsing of time-zones.
Task-number: QTBUG-22833
Change-Id: Iddba7dca14cf9399587078d4cea19f9b95a65cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The formatting of times in Norwegian has changed to use colon rather
than dot between hours, minutes and seconds:
http://cldr.unicode.org/index/downloads/cldr-30#TOC-Other
tst_QLocale gets a matching revision.
Change-Id: I35a16080def5fbadd62144a0b44be8110b9be29b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It should be easier to translate sizes in bytes to human-readable
strings consistently rather than having to repeat this code (and the
string translations) in various places. The FileDialog in QtQuick.Controls
has a use for this, too.
[ChangeLog][QtCore][QLocale] Added QLocale::formattedDataSize() for
formatting quantities of bytes as kB, MB, GB etc.
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I27bca146c3eba90fa7a5d52ef6626ce85723e3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is flaky on macOS 10.12.
Task-number: QTBUG-61500
Change-Id: I3dfb6979808dec3a20896c2579dd1f5124c94a70
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Randomly timeouts in the CI.
Task-number: QTBUG-59679
Change-Id: I28410b747b2033fc0ef6286a11c88cd0c07eb247
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
As the files are packaged into the binary, they have to be
extracted, before they can be ::open'ed.
Change-Id: Ie83086a2b9a73b6b0de462bdb52a71bb277ae06f
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
[ChangeLog][QtCore][QProcess] Added support for standard channel
redirection using setStandard{Input|Output|Error}File to
QProcess::startDetached.
Task-number: QTBUG-2058
Task-number: QTBUG-37656
Change-Id: Iafb9bd7899f752d0305e3410ad4dcb7ef598dc79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The motivation for this change is to make it simple to pass a
correctly sorted environment block to Win32 CreateProcess(). It is
also nice in other contexts that the environment variables are
sorted. The change is made for all platforms. This keeps it simple and
the only ill effect is slightly slower lookups.
Concerning the environment block passed to Win32 CreateProcess:
The environment block that is passed to CreateProcess() must be sorted
case-insensitively and without regard to locale. See
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682009(v=vs.85).aspx
The need for sorting the environment block is also mentioned in the
CreateProcess() documentation, but with less details:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682425(v=vs.85).aspx
Task-number: QTBUG-61315
Change-Id: Ie1edd443301de79cf5f699d45beab01b7c0f9de3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When punctuation is ignored then the kUCCollatePunctionSignificantMask
should not be set. This was originally thought to not be working due to
a bug on the Apple platforms, but this is not the case.
[ChangeLog][Platform Specific Changes][macOS][iOS] QCollator now
respects the ignorePunctuation property on Apple based platforms
correctly.
Task-number: QTBUG-41978
Change-Id: I62044076387d6e4479f4aaef3c2f48f49dbd160e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
First and most importantly, let's not use more than half of the template
for the application's PID. With over 71% of all PIDs on a typical Linux
system and 90% of those on a Darwin system having 5 decimal digits,
using them all in a template that is usually 6 characters long is
wasteful. That leaves only 1 character for the random part, thereby
reducing the number of temporary files possible to only 52. So limit the
PID to half the characters of the template.
Second, let's use QRandomGenerator::bounded to create the the random
part, instead of qrand (which is often unseeded at this point).
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b52eda5e467395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This class provides a reasonably-secure random number generator that
does not need seeding. That is quite unlike qrand(), which requires a
seed and is low-quality (definitely not secure).
This class is also like std::random_device, but better. It provides an
operator() like std::random_device, but unlike that, it also provides a
way to fill a buffer with random data, not just one 32-bit quantity.
It's also stateless.
Finally, it also implements std::seed_seq-like generate(). It obeys the
standard requirement of the range (32-bit) but not that of the algorithm
(if you wanted that, you'd use std::seed_seq itself). Instead,
generate() fills with pure random data.
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b4e3ba9ea04da8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Makes it easier to pull out data from a document when the structure is
known up front, while still supporting default values if the structure
does not match the expectation, eg:
int age = QJsonDocument::fromJson(ba)["users"][0]["age"].toInt(-1);
Change-Id: Ief0899bbb81610f6f22a56e2ac846121bffe77a0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Saves a lot of manual toArray() and toObject() calls when the
JSON structure is usually known anyways. Read only access for now.
Change-Id: I5fd787144198e0443e4da285a11ce2597b66f99f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTimeZone("UTC") should be valid, as "UTC" appears in the list of
availableTimeZoneIds(), and tst_QTimeZone::dataStreamTest() constructs
timezones like this, which are considered valid.
The internal representation of a QTimeZone("UTC") as created by
QTimeZone::QTimeZone(const QByteArray &ianaId) is a QUtcTimeZonePrivate
which isValid(), so the containing QTimeZone isValid() too.
When QTimeZone is serialized into a QDataStream, it calls
tz.d->serialize(ds) which is QUtcTimeZonePrivate::serialize. This
writes QStringLiteral("OffsetFromUtc") followed by the IANA ID and
the offset (etc.) to the datastream.
When QTimeZone is deserialized it looks for this marker string, and if
present, it passed all of the parameters to the QTimeZone constructor
(not just the name). However, that constructor does not support standard
IANA timezones (only custom ones), and when it detects that the supplied
IANA ID is actually listed in availableTimeZoneIds(), it leaves the
pointer to the QTimeZonePrivate uninitialized (NULL), which leaves
the QTimeZone invalid (isValid() returns false).
Thus, a valid timezone which was serialized and then deserialized has
become invalid. This also affects serialization of QDateTimes with
timezones.
Fixed by calling the name-only constructor first, which works (only) for
IANA standard timezones and leaves the QTimeZone invalid (isValid()
returns false) otherwise. In which case, we can call the many-argument
contructor to create a custom timezone with the same offset as the one
which was originally serialized.
[ChangeLog][QtCore][QTimeZone] Fixed sending IANA standard UTC-offset
QTimeZones through QDataStream, which previously came out invalid after
deserialization.
Task-number: QTBUG-60595
Change-Id: Id9c47e8bda701faae4d800e012afb6db545b2fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is possible that tmpdir already exists as a leftover from previous
tests. That is no reason for the test to fail.
Change-Id: I010633fb92defb064093af9872ae6fd2178f07dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
load(resources) makes embedding the test data into the executable
fail for platforms that use builtin test data. As the load call
is only used to obtain QMAKE_RCC we can avoid that call by
assuming that rcc was not renamed and assembling the path ourself.
Change-Id: I25b982d10f5617d9a213803e7e4bcc85fc66b2e7
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The binary hangs rather than segfaults on that platform.
Task-number: QTBUG-59936
Change-Id: Id7d38edb7c746e3c0cd4b4941e0e19b3d42a628a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This class in unused in qtbase since Qt 5.6.1.
The only outside usage was in qtserialport, which got its own copy of
QWinOverlappedIoNotifier in commit qtserialport/65dba188.
Change-Id: I7668e67a1cc49c4418c66141784b180cd5f9d479
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The documentation says that it's equivalent to
qgetenv(varName).toInt()
But the implementation wasn't. QByteArray::toInt() verifies that the
entire string was consumed, so QByteArray("1a").toInt() == 0, but
qstrtoll alone doesn't. That is, qstrtoll("1a", ...) == 1.
The implementation also detected the base, a behavior I kept. Instead, I
updated the documentation.
Change-Id: I0031aa609e714ae983c3fffd14676ea6061a9268
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This method now returns -1 by default, due to commit 6255cb893d
which mistakenly replaced -1 with Qt::IgnoreAction (0x0).
As a result, dropping is forbidden in a number of applications
(I detected this in zanshin).
Change-Id: I4922451216e08d5d3fe36f8ba87364a361b691bf
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
tryAcquireWithTimeout(0.2s) was already blacklisted and
now the same failed with "(2s)".
Task-number: QTBUG-58745
Change-Id: I82363238c08056d2969a7616e3a6e5af080d537d
Reviewed-by: Liang Qi <liang.qi@qt.io>
tst_QSharedPointer can't create a pipe as the OS has too many files
open. Systems like macOS have a lower limit to these simultaneous files
open.
Task-number: QTBUG-60410
Change-Id: I21e89f992ada2a7d09b706522a05b5952f00ec33
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
They have been blacklisted on windows previously and now fail on
macOS 10.12 as well.
Task-number: QTBUG-60993
Change-Id: Ib7a3acfc7f2285c0a587d4abd88a4a218391d623
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Limitation is that the signal needs to be parameter-less
[ChangeLog][moc] moc now supports NOTIFY signals of parent classes in Q_PROPERTY
Change-Id: Iad64c96c3ec65d4be8ad9ff1a9f889938ab9bf45
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Brett Stottlemyer <bstottle@ford.com>
The test has been observed to be flaky on Windows. Introduce
QTRY_VERIFY_WITH_TIMEOUT for diagnostics.
Change-Id: I72abdd2e5544f8f35199876486ab15151f60e5f2
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
... using the same qt_trimmed(), qTrimmed(), Q..::trimmed() split we've
been using for all other out-of-line string-view member functions to
avoid forcing string-view objects onto the stack for the passing of 'this'.
In the test, had to fix nullness not being propagated from a QByteArray
to the QLatin1String constructed from it. Probably worth fixing in
QLatin1String(QByteArray), too.
[ChangeLog][QtCore] Added qTrimmed() free functions.
[ChangeLog][QtCore][QLatin1String] Added trimmed() function.
Change-Id: I73c18ef87e203f30f7552c10dd5c84223bcfae0e
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is often more natural than (ptr, len), and I need it in the
implementation of QStringView::trimmed().
Change-Id: I1d99b5ddaf76eee0582150b0233ef6ce9c37d25d
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On winrt, the default application version is determined by its
manifest file. The template's default version is 1.0.0.0.
Additionally addRemoveLibPaths should not fail if libraryPaths
only contains currentDir.
Change-Id: Ifdd517f1bfe2fdf641f3d728ebe1fa144df1a8ca
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Found by GCC 7.
Change-Id: I90267617a038558e5b5213c598a949baf8d4d9be
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This commit fixes two bugs:
1) Two ranges should not be merged if they are of different columns.
The old code would have merged (0,0) with (1, 1). Tranforming a selection
of just two indexes in a rectangle of four indexes.
2) The QItemSelectionRange appended had wrong column and worked only for
indexes of the first column. For example if 'tl' was (0, 1) than br was (0, 1)
so the QItemSelectionRange would have be ((0,1), (0, 1-1)) so ((0,1), (0,0)).
This QItemSelectionRange is invalid because topLeft columns is greater than
bottomRight column. The fix take in consideration the bottomRight column.
Task-number: QTBUG-58871
Change-Id: I591ef0bcc63926f24a7b1ced002af9b7737a4b6e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... and update the unittest accordingly.
Compared to the 1.8 release there is one change in freedesktop.org.xml,
the magic for application/x-java-keystore was changed from host32 to
big32, as done upstream, see https://bugs.freedesktop.org/show_bug.cgi?id=99328
Task-number: QTBUG-60608
Change-Id: I47de71c9396cfc3eabc884d5679c73a3e4850a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The conditions checked are compile-time conditions anyhow.
Simplify or strenghten a few conditions while at it.
Change-Id: If07f2aedca4c3632d852a8fdb2b3f7eb55a96c93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Backtrace logging tests were not passing for arm when -O2 option was used.
Set "-fno-inline" on for the app whose backtrace is to be inspected.
Task-number: QTBUG-59966
Change-Id: Id1bbf78c31dc524357a30c7d39c239689621b155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The QMimeType class can be quite useful to graphical QML applications,
especially on the desktop.
[ChangeLog][QtCore][QMimeType] Add Q_GADGET, so that QML applications
can make use of QMimeType's properties and methods.
Change-Id: I03e6e82062558a72f5b97e65bbddfc4b7470e735
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jeremy Katz <jeremy@panix.com>
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The operator double() and operator long double() members of qfloat16
are causing cast ambiguities. This removes them, leaving only
operator float() which seems to be adequate.
Also, additional arithmetic operator tests were added which without
this removal fail to compile.
Change-Id: Id52a101b318fd754969b3de13c1e528d0aac2387
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch implements an iterator that returns a pair containing both the
key and the value of an entry in QHash/QMap.
[ChangeLog][QtCore][Containers] Added an stl-like iterator to go through
QHash/QMap returning both the key and the value of the element pointed to.
That lets QHash/QMap interoperate better with stl's algorithms like
std::set_union.
Change-Id: Idbf8a8581510b3493648c34ab04c556de9fa4aa7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing QHash::operator== does not work when the same
keys appear in different order between the two hashes being compared.
However, relying on iteration order on a QHash is (as usual) a bad
idea and one should never do it.
Task-number: QTBUG-60395
Change-Id: Ifb39a6779230e26bbd6fdba82ccc0247b9cdc6ed
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
All good (now).
Change-Id: I666773856a239826e646398a943e7df30bd81671
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For transformations, regardless of whether they're currently
overloaded on rvalue-this or not, check the results of calls to const
lvalues as well as mutable rvalues.
Use the new mixed-type QCOMPARE more.
Change-Id: Ibaa436cd88b40e5c0823c3bbe5b04a9964e7e987
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There were still two cases where spurious notifications would be
possible:
- user calls hasPendingDatagrams()/pendingDatagramSize() on UDP
socket somewhere outside the slot connected to readyRead()
signal (::WSARecvFrom posts FD_READ notification, even if
a notification for incoming datagram already exists in the
message queue);
- a socket was registered to receive several types of event and
WM_QT_ACTIVATENOTIFIERS message is located between the
different events for this socket in the queue.
Provided patch ensures that the message queue is synchronized with
the Qt event processing mechanism and adds a way to detect spurious
notifications inside the window procedure.
Task-number: QTBUG-58214
Change-Id: I49609dace601f300de09875ff1653617efabd72f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
This allows the use of move-only function objects
Task-number: QTBUG-60339
Change-Id: If3595fca338cf7f3039eb566cc02e4e73cd04c86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't know why.
tst_qflags.cpp(114): error: no instance of function template "verifyConstExpr" matches the argument list argument types are: (Qt::MouseButton)
tst_qflags.cpp(91): note: this candidate was rejected because there is a type mismatch after argument substitution
Change-Id: I84e363d735b443cb9beefffd14b9581d77933cb8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The QString API symmetry test strikes again, showing that this is
inconsistent with both QString and QByteArray, which both return empty
for empty inputs.
The fix actually makes the implementation simpler.
Extend the QStringRef test to cover null inputs, too. I can't merge
the trimmed() test in the API symmetry test until everything is
actually consistent.
[ChangeLog][QtCore][QStringRef] trimmed() now returns an empty
string-ref for an empty input. Before, it would return a null one.
Change-Id: I6b35c5f498053c4e15a4a9dd465bc696258e7393
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Less code duplication, since truncate() is the action version of
left().
This is done in preparation of adding more actions for the string
transformations we have.
Change-Id: I55027b5143ad3349d46091ac1cc3d24a9707caee
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
That's the only value for which we will guarantee a stable result across
Qt versions and across invocations of the same application on different
architectures is zero. For any other value, we reserve the right to
change the algorithm. We'll now print a warning when we detect that.
Task-number: QTBUG-47566
Change-Id: I27b55fdf514247549455fffd14b1135e10d24ab4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
All good.
Can't check QByteArray::startsWith(), as it is lacking the
Qt::CaseSensitivity parameter.
Change-Id: I7f2379e520617c14514fc66d8fb3413cfb7c9147
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If QEMU is provided sysroot with QEMU_LD_PREFIX, it opens files from there. If their
owner is the current user, testing their access rights based on assumption that they
are root fails. Skip the tests in that case similarly as is already done when the
tests are run as root.
This fixes following tests:
- tst_QTemporaryDir::nonWritableCurrentDir
- tst_QNetworkReply::getErrors(file-permissions)
- tst_qstandardpaths::testCustomRuntimeDirectory
Task-number: QTBUG-59966
Change-Id: I972ce37b4b5a7747cdd732a8e4a737ef09cbc6a5
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qstrcmp sorts null strings before empty ones, while the Qt string
classes consider them equal.
The qt_compare_strings() overload for QLatin1String was using
qstrcmp(), but is supposed to implement the semantics that Qt string
classes use, so we need to add an extra check.
Was uncovered by tests for QLatin1String::startsWith(), but added a
new test for qCompareStrings() now, which is a bit more complicated
than desired, due to the lack of QUtf8String.
Change-Id: I0493c4491df928a68861a1bc7f0962f1c870a416
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We guarded against the Unicode form being invalid and did not produce an
encoded form. But we did not guard against proper Punycode sequences
that decode to forms that had not passed the proper Nameprep stage. So
check for that and, if it fails, just keep the label in the form we
found it in (it's valid STD3 anyway).
[ChangeLog][QtCore][QUrl] Fixed a bug that caused certain domain names
that look like Internationalized Domain Names to become corrupt in
decoded forms of QUrl, notably toString() and toDisplayString().
Task-number: QTBUG-60364
Change-Id: Iadfecb6f28984634979dfffd14b833142cca8d0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
[ChangeLog][QtTest][QCOMPARE] Now supports printing QStringViews in
case of test failures.
Change-Id: I4dc2542cd1013fd63c094c249e721d7102387bde
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The whitelist is kept in ACE form, so if the TLD came in Unicode, we
need to run ToASCII before we can check the whitelist. This is slightly
inefficient because we'll run the same operation later in this domain.
Change-Id: Iadfecb6f28984634979dfffd14b831f37b0f4818
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
In the spirit of std::thread, which takes a function to call and its
parameters, and runs it in a new thread. Since the user might want to
connect to signals, move QObjects into the new thread, etc., the new
thread is not immediately started.
Although technically all of this _should_ be implementable in pure
C++11, there is nothing in the Standard to help us not reinvent all the
plumbing: packing the decay'd parameters, storing them, invoking the
function over the parameters (honoring INVOKE/std::invoke semantics).
std::function does not do the job, as it's copiable and therefore does
not support move-only functors; std::bind does not have INVOKE
semantics.
I certainly do not want to reimplement all the required facilities
inside of Qt. Therefore, the full blown implementation requires C++17
(std::invoke).
In order to make this useful also in pre-C++17, there are two additional
implementations (C++11 and C++14) that support just a callable, without
any arguments passed to it. The C++11 implementation makes use of a
class to store and call the callable (even move-only ones); basically,
it's what a closure type for a C++14 lambda would look like.
An alternative implementation could've used some of the existing
facilities inside QObject::connect implementation that store a functor
(for the connect() overload connecting to free functions), namely:
the QtPrivate::QFunctorSlotObject class. However:
* QFunctorSlotObject does not support move-only callables (see
QTBUG-60339);
* QFunctorSlotObject itself is not a callable (apparently by design),
and requires to be wrapped in a lambda that calls call() on it;
* the moment QTBUG-60339 is solved, we'd need the same handwritten
closure to keep QFunctorSlotObject working with move-only callabes.
So: just use the handwritten one.
The C++14 implementation is a simplified version of the C++11 one,
actually using a generalized lambda capture (corresponding to the
handwritten C++11 closure type).
All three implementations use std::async (with a deferred launch policy,
a nice use case for it!) under the hood. It's certainly an overkill for
our use case, as we don't need the std::future, but at least std::async
does all the plumbing for us.
[ChangeLog][QtCore][QThread] Added the QThread::create function.
Change-Id: I339d0be6f689df7d56766839baebda0aa2f7e94c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Factor out both CreateProcess calls into one function that also calls
the modifier callback for the CreateProcessArguments struct.
Task-number: QTBUG-57687
Change-Id: I9d2ef4f2d7cd077aa4c3eba926ab4dfb9e570291
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was simply not working for two reasons:
- The index passed to QMetaObject::metacall was not right (there was an offset
because of the return type)
- If the registration succeeded, the arguments were not even initialized.
The tests in tst_moc always called QMetaMethod::parameterType before calling invoke,
which was properly registering the type. So this was not seen in the tests before.
[ChangeLog][QtCore][QMetaMethod] Fixed crash in invoke() with QueuedConnection and
types whose metatype gets automatically registered.
Task-number: QTBUG-60185
Change-Id: I4247628484214fba0a8acc1813ed8f112f59c888
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It only contained a concatenation of the individual rule sets,
probably to fix their order in a central place, as well as
simplifying iteration in defaultCategoryFilter().
Fix these two issues differently, but introducing a RuleSet
enum that lists rule sets in the order in which they should
be applied by defaultCategoryFilter(), and turn individual
rule sets vectors into a C array of vectors.
This enables two nested loops in defaultCategoryFilter to
replace the one loop over 'rules'. Apart from building up
'rules' in updateRules(), this was the only access to that
member. That leaves updateRules() with just the task of
running defaultCategoryFilter() on the new rule sets.
Consequently, a call to updateRules() can now replace the
identical loop in installFilter().
Performance should not suffer. Iterating over a fixed-size
array of vectors is hardly any slower than iterating over
a single vector, and while the construction of 'rules'
was probably a one-off task in most programs, this way
of keeping the rules also saves memory because rules are
not kept in two different vectors.
It is also more maintainable, of course.
Change-Id: Ibc132d096c8137dd02b034752646212e51208637
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... instead of the combination with Q_OS_WIN we used so far.
This patch adapts ocurrences that are new in 5.10.
Change-Id: If392df481713e56c776c2326e0e02324a3a80c89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As for the formatting code, de-duplicate the parsing code by only
parsing char*s, converting QChars to Latin-1 first in a small buffer.
The QUuid(const char*) ctor performed no length checking, relying
instead on the checks performed within _q_uuidFromHex(), which
includes an implicit check for premature end (because NUL is not
a valid token for the parser).
The (QString) and (QByteArray) ctors did perform length checking.
To the extent possible, this is removed, since it is handled by
_q_uuidFromHex(). Failure cases need not be optimized. Only the
QLatin1String overload needs to do some checking, because views in
general are not NUL-terminated. The QStringView overload can just
append a NUL when it converts to Latin-1.
The only check I added to _q_uuidFromHex() is that for src ==
nullptr. It would otherwise be duplicated in several callers.
While touching the internal functions, port to passing and returning
by value.
Saves 1.6KiB in text size on optimized GCC 6.1 Linux AMD64 builds,
even though we added new API.
Port some users to the new functions. Expand fromString() test.
[ChangeLog][QtCore][QUuid] Added fromString(QStringView/QLatin1String).
Change-Id: I519339419129550c86e0ea80514865cd6a768f5d
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
That unveiled a broken test in QVariant which was relying on QJsonDocument
being not relocatable. So fix the test by using a proper datatype for the task.
Change-Id: Ic35f09f936b00dfaeb368ccb42aecf35cc506029
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
This change made QMetaType start reporting that QJson* classes were
movable; however, the test used QTypeInfo and not QTypeInfoQuery to
double check that information.
Port the test to QTypeInfoQuery.
Change-Id: I3227a70a8f24c0013257e180e9cb9cfebe9947f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since commit bf2160e72c, we can rely on
charNN_t support in all compilers except MSVC 2013, and since that
commit, we use (in 5.10, not 5.9, yet)
!defined(Q_OS_WIN) || defined(Q_COMPILER_UNICODE_STRINGS)
when we only need charNN_t, the type, as opposed to its library
support (u16string, char_traits<char16_t>, ...).
This patch splits the Q_C_UNICODE_STRINGS macro into two, adding
Q_STDLIB_UNICODE_STRINGS for when we need std::uNNstring, leaving
Q_C_UNICODE_STRINGS for when we need just charNN_t support.
In QDebug, when constructing a QChar out of a char16_t, cast to ushort
first, since QChar(char16_t) was only officially introduced in Qt 5.10.
[ChangeLog][Potentially Source-Incompatible Changes] The internal
Q_COMPILER_UNICODE_STRINGS macro is now defined if the compiler
supports charNN_t, even if the standard library does not. To check for
availability of std::uNNstring, use the new Q_STDLIB_UNICODE_STRINGS
macro.
Change-Id: I8f210fd7f1799fe21faf54506475a759b1f76a59
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 47cc9e23a3.
We use QCoreApplication::applicationDirPath in the logging initialization to find
a possible qtlogging.ini file. Because QCoreApplication::applicationDirPath requires
a QCoreApplication instance this leads to a qWarning, which in turn leads to a
recursive call to the logging initialization, and in turn to a recursive mutex deadlock.
Task-number: QTCREATORBUG-18031
Change-Id: Ic75e1e8c062eb647991725378489bf87c9648cca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: Ia733105c5b6f28e22af511ced5271e45782da12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have two functions to get a substring without doing some
calculations involving size():
- mid(p): mid(p, size() - p)
- right(n) : mid(size() - n, n)
(left does not involve size(), so isn't in that set). What was missing
was a name for
- f(n): mid(0, size() - n)
As an action, it's called chop(), so call the transformation version
chopped().
I made chopped(n), n < 0 or n > size(), undefined, because QString(Ref)
::left() is broken[1], while the QByteArray implementation is not. This
is the only way to get consistent behavior among the three classes.
I's also the correct thing to do.
[1] instead of returning the empty string for negative indexes, it
returns the whole string.
[ChangeLog][QtCore][QString/QStringRef/QByteArray] Added chopped(n), a
const version of chop(n).
Change-Id: I6c2c5b16e0060fa924ced5860f21f2d0f23bd023
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Initialize a deleter for a new object, created by
QSharedPointer::create(), only after the object is actually
constructed.
[ChangeLog][QtCore][QSharedPointer] Fixed undefined behavior when
creating an object with QSharedPointer::create() and its conscructor
throws an exception.
Task-number: QTBUG-49824
Change-Id: I07f77a78ff468d9b45b8ef133278e8cdd96a0647
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Seems like an obvious omission.
[ChangeLog][QtCore][QVariant] Can now convert QUuid to and from
QByteArray, not just QString.
Change-Id: Ib56ae86ca0c27adaf1e095b6b85e64fe64ea8d18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QDate/QTime/QDateTime] Added toString() overloads
taking the format as a QStringView.
Change-Id: I322fa22e6b13fe8ba4badf0a3133425bd067ef32
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
While at it, change the interface of qt_repeatCount() to just take
a single QStringView, since QStringView::mid() is so cheap. Add some
\internal docs.
[ChangeLog][QtCore][QLocale] Added toString(QDate/QTime/QDateTime)
overloads taking the format string as a QStringView.
Change-Id: Ic078796677a6db06227c8a3e276dbdb1039ceead
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QSysInfo::productType() returned "osx" for all versions of macOS, even
10.12. Change 3e2bde3578 was incorrect.
[ChangeLog][Important Behavior Changes] QSysInfo::productType() and
QFileSelector behavior on macOS was restored to match what Qt used to
return in version 5.7.0 and earlier. The behavior found in Qt 5.6.2,
5.7.1 and 5.8.0 is removed.
[ChangeLog][Future Compatibility Notice] The identifiers that
QSysInfo::productType() and QFileSelector will use to identify macOS
systems will change in Qt 6.0 to match the Apple naming guidelines which
will be current then.
Task-number: QTBUG-59849
Change-Id: Ib0e40a7a3ebc44329f23fffd14b2b39392210c4f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The parsing code anyway operated on a QByteArray created from
toLatin1(), so expose this to the user by providing a QLatin1String
overload.
Also provide a QStringView overload, since we can. Port one user (in
qmake) to the new overload.
[ChangeLog][QtCore][QVersionNumber] Added QStringView and
QLatin1String overloads of fromString().
Change-Id: Idbff44c3997f5cfa86ea1bce8b3da4b700a3d9cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is incorrect to collapse a "symlink/.." segment because the parent
directory of the symlink's target may not be the directory where the
symlink itself is located.
[ChangeLog][QtCore][QDir] Fixed a bug that caused QDir::mkpath() to
create the wrong directory if the requested path contained a symbolic
link and "../".
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e367730a1e24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
std::nullptr_t is nullary: it accepts only one value, nullptr. So we
don't need to read or write anything. This commit simply adds the two
operators that allow generic code to operate on std::nullptr_t if
required.
This commit also adds the actual use to QMetaType::load/save, even
though there's no change in behavior.
[ChangeLog][QtCore][QDataStream] Added operator<< and operator>>
overloads that take std::nullptr_t, to facilitate generic code.
Change-Id: Iae839f6a131a4f0784bffffd14aa37e7f62d2740
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These STL-compatibility functions are present on our generic
containers, but not on the string classes.
[ChangeLog][QtCore][QString/QStringRef/QByteArray/QLatin1String] Added
front() and back() for STL compatibility.
Change-Id: I536019396b319abd1e2daf9c64ebab4e7a35b334
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Like the qt_compare_strings()/qCompareStrings() split, distinguish
between the internal and exported functions.
Because of the circular dependency between qstring.h and qvector.h,
the inline toUcs4() function has to be in qvector.h.
At some point, we need to refactor the headers so qvector.h is lower
in the dependency chain than qstring.h. It's not the first time this
bites.
Change-Id: Ief9f3bd92c83cdd1f31c51c700f42e146916eefd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All good.
Change-Id: Id791a04fd5e2c9bc7f54660eaaa95d6db61a5674
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Akin to the successful tst_QStringApiSymmetry, add such a test for
generic containers, too. Yes, we have tst_collections, but it's a
cut'n'paste mess that makes it hard to systematically perform
cross-class checks for consistency. This new test, still in its
infancy, uses templates and thus ensures that exactly the same checks
are run on all containers.
Starting out with front()/back(), which the string classes were found
to lack, we will build this test up, as we did and continue to do with
the string API one.
Change-Id: I07323340b5612ecc658232b2776d788018010d0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Backtrace logging tests were not passing for arm. Added compile option
-funwind-tables to support backtrace on arm.
Task-number: QTBUG-59966
Change-Id: I5e2443b1e3a644a239dab68db990e75ae8fade24
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Alignment test was not compiling or passing on GCC / arm
- Using C++11 alignas() enforces maximum limit for the alignment, which
at least on GCC / arm is __BIGGEST_ALIGNMENT__ multiplied by 8
- On GCC 6.2.0 / x86_84, maximum alignment accepted by alignas is 128
- On GCC 5.3.0 / arm, maximum alignment accepted by alignas is 64
- This change calculates biggest tested alignment on ARM targets
and compilers supporting alignas() to the value calculated
from __BIGGEST_ALIGNMENT__
Task-number: QTBUG-55492
Change-Id: If2b70000ff9cdc5ae8c5a00e39f79efcc6ba1221
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qemu does not report /proc/self/maps size correctly. Added expected
failure for it
Change-Id: I4019884702b8f9a33717b02e79c9e0c042b2449f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the new overload directly in QXmlStream*.
Saves 129B in QtCore text size on optimized GCC 6.1 Linux AMD64
builds, even though we added two more functions.
[ChangeLog][QtCore][QString] Added arg(QStringView),
arg(QLatin1String) overloads.
Change-Id: Idf7236dcab763824593f34182e4e0b16b5ed4321
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Nothing changes, we've just given 'QIntegerForSizeof<size_t>::Signed'
a better name in qglobal.h and now use it in QStringView API and
users.
Change-Id: Ibea1ae26e95b3a96708400fd4b0cd120459d57b6
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
With sufficient enable_if magic, the array ctor can overload the
pointer ctor and statically determine the size of the array passed.
Consequently, remove the sizeof in QStringViewLiteral again.
Change-Id: I486baa3cafefde60ccc5f2b47eb94ee53cefe63c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Pretty straightforward, as the implementation already used only
an iterator range internally.
Change-Id: I6e6b809329e2e2548bba6db414a3d107d09637d1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The new overloads do not accept parameters for the invoked function, this
use case is handled by using lambda.
Overloads for non member function pointers and functors are separated as
the return type is not retrieved in the same way.
Move QSlotObjectBase, QSlotObject and QFunctorSlotObject from
qobject_impl.h to qobjectdefs_impl.h in order to make them available in
qobjectdefs.h.
Update autotests of previous overloads because of a soft break in source
compatibility: passing null literals (0, NULL, nullptr, etc.) for the
second parameter of invokeMethod() is not supported anymore.
[ChangeLog][QtCore] Added QMetaObject::invokeMethod() overloads for function
pointers.
Task-number: QTBUG-37253
Change-Id: I6fb67e086d315ae393ce32743c4eb1abd6cc9139
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Starting a detached process with a custom process environment can now be
achieved by:
QProcess p;
p.setProgram("foo");
p.setProcessEnvironment(myEnv);
p.startDetached();
[ChangeLog][QtCore][QProcess] Added the ability to set a custom process
environment for detached processes.
Task-number: QTBUG-2284
Change-Id: I49406dffb64fa2aed41ea05cb271bd42eeabb729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: If1d2cf175d51b3c02881e21937b0a2d33b78aadd
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove most of the std::equal() tests that were used to determine
equality in pre-relational-operator-times again.
Amends a1421e4787.
Change-Id: Iff64808f5ac60861caee899d594b512b58046636
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The SHA3 family is a modified version of Keccak. We were
incorrectly calculating Keccak (and even *testing* Keccak!),
but claiming it was SHA3.
To actually calculate SHA3, we need invoke Keccak on the original
message followed by the two bits sequence 0b01, cf. §6.1 [1].
[1] http://dx.doi.org/10.6028/NIST.FIPS.202
[ChangeLog][QtCore][QCryptographicHash] QCryptographicHash now
properly calculates SHA3 message digests. Before, when asked
to calculate a SHA3 digest, it calculated a Keccak digest instead.
Task-number: QTBUG-59770
Change-Id: Iae694d1a1668aa676922e3e00a292cddc30d3e0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unix mmap(2) system calls do allow for mapping beyond the end of the
file, though what happens after you try to dereference the pointers it
gives is unspecified. POSIX[1] says that implementations shouldn't allow
it:
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified portions
of the last page of an object which are beyond its end. References
within the address range starting at pa and continuing for len bytes to
whole pages following the end of an object shall result in delivery of
a SIGBUS signal.
However, Linux allows this in read-write mode and extends the file
(depending on the filesystem).
Windows MapViewOfFile never allows mapping beyond the end.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/mmap.html
Change-Id: Ie67d35dff21147e99ad9fffd14acc8d9a1a0c38d
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We want to prevent
QStringView(QChar|QLatin1String|QByteArray|const char*)
from compiling as QStringView(QString(...)), so I added = delete'ed
ctors for these types to QStringView. However, that makes QStringView
participate in overload resolution for these types. Even if the
QStringView ctor will always fail to compile, the presence of these
ctors alone makes calls to functions overloaded on QString and
QStringView ambiguous:
f(QStringView);
f(QString);
f(foo); // ambiguous
f(QChar('f')) // ambiguous
f(QLatin1String(foo)); // ambiguous
f(QByteArray(foo)); // ambiguous
Fix by making the QString and QStringRef constructors templates
constrained to accept only these two types. This should also help to
move the QStringView definition to before the QString one (as soon as
we get rid of or start to ignore QString::Null), simplifying a lot of
code in qstring.h down the line.
This should also fix MSVC's accepting of two user-defined conversions
which caused static non-compile-tests to fail in the initial
QStringView patch, and which were therefore removed. This patch brings
them back.
Change-Id: I95ac38c0d31cd8c726f7e952017569d32e484413
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Test tst_LargeFile::mapFile fails on Qemu for files over 4Gb.
Fixed by limiting maxSizeBits to 28 (must be n*4 and < 32).
- Bug QTBUG-21175 is also effective on ARM targets. Fixed by
expecting failure also on ARM.
Change-Id: I9103727e618a17259b4785ec8c284f3bb60ebea7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The returned data is in US-ASCII (or else Latin-1), and resides in
consecutive memory. We can therefore return it in a QLatin1String,
which, however, will in general not be NUL-terminated.
Many users use the return value as part of a QStringBuilder
expression, and those which are not are not pessimized further by
this change.
The caller in qtimezoneprivate_icu looks as if it could simply zero
-terminate the return value and use it as-is, as opposed to
converting to UTF-8, but I left the code equivalent to the original
just the same.
Change-Id: I0e628af8c1320fcff8d0aacf160e859681d2b85a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ensures that numbers representable as 64-bit integer
are not printed using exponent notation.
Some JSON implementations such as the one of the Go
standard library expect this in the default
conversion to int.
Change-Id: Ic3ac718b7fd36462b4fcabbfb100a528a87798c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QStringView is a simple container for (const QChar*, int) and (const
char16_t*, size_t). It acts as a replacement interface type for const
QString and const QStringRef, and enables passing all kinds of
string-like types to functions otherwise expecting const QString& -
without the need to convert to QString first.
The use of this new class is guarded by a macro that enables three
levels of QStringView support:
1. offer QStringView, overload some functions taking QString with
QStringView
2. like 1, but remove all overloads of functions taking QStringRef,
leaving only the function taking QStringView. Do this only where
QStringRef overloads tradionally existed.
3. like 2, but replace functions taking QString, too.
This is done in order to measure the impact of QStringView on code
size and execution speed, and to help guide the decision of which
level to choose for Qt 6.
This first patch adds QStringView with most of its planned
constructors, but not much more than iterators and isNull()/isEmpty().
Further patches will add support for QStringView to QStringBuilder,
add QStringView overloads of functions taking QString, and add the
complete API of const QString to QStringView.
[ChangeLog][QtCore][QStringView] New class, superseding const QString
and QStringRef as function parameters, accepting a wide variety of
UTF-16 string data sources, e.g. u"string", std::u16string{,_view},
and, on Windows, L"string", std::wstring{,_view} without converting to
QString first.
Change-Id: Iac273e46b2c61ec2c31b3dacebb29500599d6898
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We can quickly check if the change affects sorting by checking whether
lessThan(N-1, N) and lessThan(N, N+1) are still true. If this is the case
for all changed rows, then we can skip the whole remove+insert+layoutChanged().
Task-number: QTBUG-1548
Change-Id: Ia778b3e8880cc9909eef1f8a016c84235870353d
Reviewed-by: Stephen Kelly <steveire@gmail.com>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
CustomTextWidgetIface marked its text() method as an override;
DropOnOddRows marked its canDropMimeData() as an override; each
neglected some other methods that are overrides. Convert
Q_DECL_OVERRIDE to the keyword in affected classes, to match.
Change-Id: I78b38e20a81e3e6aab282a1cb3d70cdf8a5f4135
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
mkdir(data2) depended on mkdir(data1) being run before, or it would
fail. In addition, the rmdir() test required the equivalent mkdir() test
being run before. So drop these annoying dependencies and make the tests
cleaner by having clear separation of the test data and merging the two
tests into one
The entryList() test still depends on the testdir being clean: it will
fail if mkdirRmdir() previously failed.
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e35972d2a3d8
Reviewed-by: David Faure <david.faure@kdab.com>
We don't load and save pointers usually because the pointer value cannot
be guaranteed to remain across program invocations. However, nullptr is
an exception: a null pointer is always a null pointer.
We don't actually have to read or write anything: there's only one value
possible for a std::nullptr_t and it is nullptr.
[ChangeLog][Important Behavior Changes] A QVariant containing a
std::nullptr_t is now streamable to/from QDataStream.
Task-number: QTBUG-59391
Change-Id: Iae839f6a131a4f0784bffffd14aa374f6475d283
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Task-number: QTBUG-59218
Change-Id: Ic839a36af1ecab39da0c3394c34181b6717e24e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QUrl::isRelative(str) would be false for such files, so first check for
file existence before doing any URL parsing.
Change-Id: I51b6229251ad94877ac408b2f8018456d3e10a36
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... to avoid the expensive conversion from QString to QL1S.
[ChangeLog][QtCore][QStringList] Added contains(QLatin1String) overload.
Change-Id: Ie75839ce9e46e03fe5155a02c7dcf00277b95c8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit e0ea0f6178 optimized QChar <->
QString(Ref) comparisons by adding more overloads to avoid creating
QStrings from QChars just to compare them.
But these new overloads made existing comparisons to QChar ambiguous.
This was known at the time for QChar/int comparisons.
It has since turned out that also comparing to '\0' is ambiguous,
ie. not comparing to int or char per se is ambiguous, but comparing to
nullptr constants is, because QString(const char*) is just as good a
candidate as QChar(char)/QChar(int).
Since we allow QString/QChar comparisons, it seems logical to solve
the problem by adding QChar<->nullptr overloads.
[ChangeLog][QtCore][QChar] Disambiguated comparisons with nullptr
constants such as '\0', which 5.8.0 broke. As a consequence,
QChar<->int comparisons are no longer deprecated, as this was a failed
attempt at fixing the ambiguity.
Change-Id: I680dd509c2286e96894e13078899dbe3b2dd83bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It has started failing recently on the CI, too.
Task-number: QTBUG-58745
Change-Id: I4c8834917e6455d00c300549ed448b06da75d5bc
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
in the vain hope to get the CI unstuck again.
Change-Id: I1b01bb1d59a8850f68d1d80838f5606f4159bcbd
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Fixes the bug in QFile which allowed opening a file with reserved
characters in its name. If the name is a long file path, CreateFile
opens a file with a truncated name instead of failing, so we have
to catch reserved characters ourselves.
[ChangeLog][Windows] Fixed a bug that caused QFile to create
files with truncated names if the file name was invalid. Now,
QFile::open correctly fails to create such files.
Task-number: QTBUG-57023
Change-Id: I01d5a7132054cecdfa839d0b8de06460039248a3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... for better std C++ integration.
[ChangeLog][QtCore][QChar] Added constructors from char16_t and, on
Windows, wchar_t.
Change-Id: I2d18ea3a37e869b8ea9f4036d7200d9d13c7d929
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
You can now use the recursiveFiltering property to recurse into
children to find potential matching children to filter in.
Change-Id: I411a2fb29489fd56b9c881b3e6b8d1860cce630c
Reviewed-by: Stephen Kelly <steveire@gmail.com>
By adding std::move where it makes sense.
This is not only good for move-only types, but for any type which
can be moved as it saves copies of the return value in any case.
[ChangeLog][moc] Move-only types are now supported as return types
of signals and slots.
Change-Id: Idc9453af993e7574a6bddd4a87210eddd3da48a9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's a Qt 3 compatibility vehicle, and as such inherits the now-alien
property to distinguish empty and null strings. Particularly worrisome
is the following asymmetry:
QString("") == QString::null // false
QString("") == QString(QString::null) // true
Instead of fixing this behavior, recognize that people might use it as
a weird way to call isNull(), albeit one that once was idiomatic, and
simply deprecate everything that deals with QString::null.
[ChangeLog][QtCore][QString] QString::null is now deprecated. When
used to construct a QString, use QString() instead. When used to
compare to a QString, replace with QString::isNull().
Change-Id: I9f7e84a92522c75666da15f49324c500ae93af42
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Stale Lock files in the future can happen in some situations. For exemple
two computers with different clocks access the same file system. It could
be that one of the timestamp is totaly off (several years into the future).
[ChangeLog][QtCore][QLockFile] Fixed a deadlock occurring if a corrupted
lock file's modification time is in the future.
Change-Id: I8dac98a0e898c76bcef67f8c195e126c996b6add
Reviewed-by: David Faure <david.faure@kdab.com>
Commit fb376e0fcc removed an array that
facilitated returning the names of built-in types, to avoid the jump tables
from the switch statement. This commit brings it back but makes the array a
compile-time constant string offset table.
The array is created by way of a set of C++11 constexpr functions, so we
require that compiler feature. I've tested that MSVC 2015 does support
it as well as the ICC 17 when masquerading as MSVC 2015, so I've enabled
for that too. The only compiler left out is MSVC 2013.
If we didn't need to support MSVC 2015, this could have been written
more simply with C++14 relaxed constexpr.
This also adds unit tests to confirm that QMetaType::typeName() does
return null when we said it would. We're testing QMetaType::User-1
(which we'll likely never use) and QMetaType::LastWidgetsType-1 to
select something inside the range of the built-in types.
Task-number: QTBUG-58851
Change-Id: I4139d5f93dcb4b429ae9fffd14a33982891e2ac1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Let's take the beginning of the description: WaitForSingleObjectEx can
be up to 16 milliseconds early. This is proven by the fact that there
are tests doing:
wait(waitTime);
QVERIFY(timer.elapsed() >= waitTime - systemTimersResolution);
and failing.
Task-number: QTBUG-59337
Change-Id: Iae839f6a131a4f0784bffffd14a9a79523d69d94
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
ResultStore never actually exists, only ResutStoreBase does. So casting to
ResultStore<T> and calling its member functions is UB. Put the type dependent
function as template member functions within ResultStoreBase and so we don't
need QtPrivate::ResultStore anymore.
Same goes for the iterator.
Change-Id: I739b9d234ba2238977863df77fde3a4471a9abd2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Parameters passed by value, like local function variables, are subject
to NRVO/return-by-move already, so adding std::move, even disguised as
qMove(), makes Clang warn about a pessimizing move.
Change-Id: I7d59bfee4cf7ecddee0874ee489367044c702643
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QLocale::matchingLocales() simply created each locale using the basic
data, without (unless the matching conditions stipulated Language C)
applying number-options hacks that it applies everywhere else, when
creating the C locale. Thus the C locale in its returned list (if it
wasn't the only entry) ended up with the default number options,
without omiting separators in numbers. Thus QLocale::c() didn't
actually appear as an entry in the list. Discovered while
investigating QTBUG-58947.
Added a dumb autotest that checks various ways of getting the C locale
do actually give us equal locale objects. Fixed matchingLocales() to
apply the same hack as is used elsewhere for the C locale.
Change-Id: I263f31da623052b63171f5b5a83c65802383df21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit eab7efd1 increased the timeout for this test, but apparently 10
seconds are still not enough. Set the timeout to a minute.
Task-number: QTBUG-59075
Change-Id: Iebab8e5c73c4858ca90063a82aedfbb2546a62cc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
C0 to DF take one continuation byte; E0 to EF take two.
It's invalid UTF-8 anyway, but at least this is what the test row meant:
overlong sequence with 3 bytes of what should have been two.
This updates the comment to match the character that we were actually
testing.
Change-Id: I85a8bd6da2c44f52b4e3fffd14a75df2600487aa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Unlike setTimeSpec, this forgot to clear the bit when detaching. So it's
possible that some further use of the flags could incorrectly conclude
that the data was short and then proceed to corrupt the pointer.
The example from QTBUG-59061 caused this because toUTC() -> toTimeSpec()
calls setMSecsSinceEpoch which left the bit set; then addDays() calls
setDateTime(), which calls checkValidDateTime() and that corrupted the
pointer. This problem was more visible on 32-bit systems because no
QDateTime was short (except for default constructed ones), but it
can happen on 64-bit with sufficiently large dates.
Task-number: QTBUG-59061
Change-Id: Ibc5c715fda334a75bd2efffd14a562a375a4e69b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The call to trimmed() makes sense for URLs typed in a browser's location bar,
but its use in every code path made it impossible to open a file with a trailing
space in command-line tools that uses fromUserInput(cwd) to handle command-line
arguments, as recommended. For instance kde-open5 "file.txt " would fail.
Change-Id: Ie61182684521d91f077d3e76f95b7240965ab405
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to test specific filenames without polluting the current dir.
Change-Id: Ieb99019a2e37e30f294d85c5d80af1de1b919019
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A Q_GADGET class can be used both as a value class and a pointer, but
right now QMetaType::IsGadget is only set for value types. This change
introduces PointerToGadget metatype flag which is set for pointers.
This allow for better handling of gadgets in code as well as
disambiguating between value types and pointers to value types.
Change-Id: Id3bd9e18a8eec7ca1cc6b1c25ed03cdc8c0a75a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It's only used in the autotests, and it private API, so
downgrade from Q_CORE_EXPORT to Q_AUTOTEST_EXPORT.
Fix a use of QTimeZonePrivate functions unprotected by
QT_BUILD_INTERNAL in tst_qtimezone.cpp.
Change-Id: I70eaea06f8fcf2983aeafb6894c3a5d2a4b272a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The cancel() function added in 5b11e43e for Qt 5.5 suffers from a
number of problems:
First, if runnable->autoDelete() is true, then the function suffers
from the ABA problem (see documentation written for trytake()).
Second, if runnable->autoDelete() is false, due to cancel() throwing
away crucial information instead of returning it, the caller cannot
know whether the runnable was canceled (and thus has to be deleted),
wasn't found or is currently executing (and thus mustn't be deleted),
or has finished executing (and can be used to extract the result).
Deprecate this dangerous API and replace it with the much more useful
Private::stealRunnable(), promoted to public API and renamed to
tryTake() for consistency with the rest of Qt.
Described the various caveats in the function's documentation.
[ChangeLog][QtCore][QThreadPool] The cancel() function suffers from
several subtle issues and has been replaced with a new tryTake()
function.
Change-Id: I93125935614087efa24b3e3969dd6718aeabaa4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We define QT_STATICPLUGIN for the plugins in this case, so that they
define the factory functions needed to link them directly into the
test.
Change-Id: I0f2de7bf6bec5a6d53ec9ad92536817c1221b7d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Some format and parse tests for time and date-time depended on locale
but had test data for the C locale (so fail if the test-environment
has, e.g., LANG=de_DE@utf8). So impose the C locale (until Qt 6).
The date-time test did *some* attempts at fixing for locale, but
failed to handle am/pm; and we do have "### Qt 6" comments in
Q(Date|Time)+::fromString indicating that we intend to switch these
methods to use the C locale by default (which shall fix this once and
for all). So rip out the incomplete localization now and test we work
properly at least when the locale used *is* C. Add a comment to the
matching QDate test to rip out its (presently adequate) matching code
once we do get to Qt 6 and make fromString() use the C locale.
QDateTimeParser uses systemLocale(), which is initialized the first
time it gets accessed; so we need to frob the locale *early*; doing so
in the test-class constructor is about as early as we conveniently
can; and seems to work (while doing it in individual tests does not).
(There is no point rolling back at the end; the QSystemLocale global
has been set up by then, so the roll-back would merely leave the
global out of sync with setlocale() and the environment.)
Task-number: QTBUG-58728
Change-Id: Ifa6778a80276050a099387a6dab15a1096be7561
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
AİİA.pdf takes 8 QChars, but after lowercasing it takes 10, so the code cannot
assume the length to be the same.
Task-number: QTBUG-58822
Change-Id: Id6fbb99f6afd08ee420099cd66372732d7598d9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like the lvalue QVector::append() overload, when we reallocate,
we need to take a copy of the function's argument because the
reference will get stale upon reallocation.
Add a test.
[ChangeLog][QtCore][QVarLengthArray] Fixed a bug involving
appending an item already in the container to the container
again.
Change-Id: I06eeed6cb383dd5924e47a302bb3d1666d04c8e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Automount filesystems like /home on many operating systems (QNX and
OpenIndiana, at least) don't like if you try to mkdir in them, even if
the file path already exists. OpenIndiana even gives you an ENOSYS
error.
So instead, let's try to mkdir our target, if we fail because of ENOENT,
we try to create the parent, then try again.
Task-number: QTBUG-58390
Change-Id: Ibe5b1b60c6ea47e19612fffd149cce81589b0acd
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Systematic testing in tst_QStringApiSymmetry revealed a bug in
QStringRef::toLatin1(): a null input did not result in a null output,
but an empty one. This is fixed, for consistency with
QString::toLatin1(), and QString(Ref)::toUtf8(), which behaved
correctly already.
The same bug was found in QString(Ref)::toLocal8Bit(), which is
particularly hideous, as it's documented to fall back to toLatin1(),
which preserves null inputs. Fixed, too.
[ChangeLog][QtCore][QString] toLocal8Bit() now preserves nullness of
the input QString (outputs null QByteArray).
[ChangeLog][QtCore][QStringRef] toLocal8Bit() and toLatin1() now
preserve nullness of the input QStringRef (output null QByteArrays).
Change-Id: I7026211922c287e03d07e89edbad2987aa646e51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QDateTime::operator_insert_extract() was setting the time-zone and
taking care to restore it at the end of the test; however, if the test
were to fail, the restore would be skipped. Package the zone-setting
and restore in a class instance, so that premature return can't bypass
the restore.
Change-Id: I3df63260da17e481ef4d0d107d9f0fdea3e147e7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We keep the runnables from finishing by having them block
on a QSemaphore::acquire() call inside run().
If we fail a test that precedes the call to sem.release()
further into the test, the early return will cause the
thread pool to be destroyed, which will then attempt to
wait for the runnables to finished, which, in turn wait
for the semaphore to be released.
-> dead lock
Fix by introducing a RAII object to release the semaphore
with a sufficiently large number to unblock all runnables.
That number will in some situations be too large, but that
does not matter.
Change-Id: I1ec7e29b37bc36309e93e6e30708cc7db3c9579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to get reproducible runs of the test, we need to
wait in the main thread until all runnables have started
executing. Otherwise, what the cancel() loop below actually
does will vary from run to run.
Change-Id: Ib912b0943e7bbd55c9480ae6fd4011ba20ac457e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of allocating a statically-sized array on the heap,
use an automatic C array instead.
Replace some magic numbers with named constants.
Change-Id: I17d29a76a67c4a413453ac26a5dee8cd54a8a37d
Reviewed-by: David Faure <david.faure@kdab.com>
Manipulating a simple int from multiple threads is a data race,
thus undefined behavior.
Fix by using QAtomicInt and atomic operations instead.
Change-Id: I5418bc260da57fe353a71b8e5c7c1c97adbe7597
Reviewed-by: David Faure <david.faure@kdab.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
currencySymbol == "$" does not mean negative currency values will be formatted
as "($value)". With all locales I have on my mac machines (10.11/10.12) the
result is different from what this test expects. Also, the results are very
different for different locales. Apparently, we never saw this problem before
since in our CI "macs" we never have US Dollar/en_US selected in System Preferences.
Task-number: QTBUG-58784
Change-Id: Ic2c3a3172bf1e715e99092ddee8f461b216d995a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The runUpdateMimeDatabase() call was timing out on the CI due to
running out of the default 30s timeout for QProcess::waitForFinished()
(on my machine, that call takes less than 0.5s, reliably...).
Increase to two minutes.
Change-Id: I61b2e060ea9c2508b853847ba7040ad499e0084c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
When one of the QCOMPAREs in Consumer::run() fails, the consumer
returns early, leaving the producer deadlocked in a QSemaphore's
acquire() call. Change these to tryAcquire() with a large timeout,
so the producer, too, eventually leaves run().
Change-Id: I7421d43305decd4754e09c8e092363594d1be06b
Reviewed-by: David Faure <david.faure@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58741
Change-Id: I43196d3a27f726fb96b427f5071e726b571a0404
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This is a simple RAII class that makes semaphore releasing
reliable in the face of exceptions and early returns.
This code originates from KDTools' KDSemaphoreReleaser[1], but
has been extensively reworked to support C++11 move semantics.
[1] https://docs.kdab.com/kdtools/2.3.0/class_k_d_semaphore_releaser.html
[ChangeLog][QtCore][QSemaphore] Added a new RAII class, QSemaphoreReleaser,
to reliably perform release() calls.
Change-Id: I6aff64d37cc0882b17c4419817bde60b542f34d9
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add proper support for 'so' and 'bundle' suffixes. Qt wrongly assumes
.so libraries are not versioned on Apple platforms, which is
wrong. Also, the shared library .bundle which is what Apple recommends
instead of .so, are also versioned (not to be confound with the
different Core Foundation bundles, which are directory hierarchy).
For more info, see http://docstore.mik.ua/orelly/unix3/mac/ch05_03.htm.
Especially the part that reads:
"Loadable modules, called bundles in Mac OS X, have the file type
MH_BUNDLE. Most Unix-based software ports usually produce bundles with a
.so extension, for the sake of consistency across platforms. Although
Apple recommends giving bundles a .bundle extension, it isn't
mandatory."
Task-number: QTBUG-50446
Change-Id: Iacd5136397a12d65d83821434f332eb602550b4b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Vectorized versions of ucstrncmp work on larger chunks of text
(typically 8 characters and an optional 4 more in some cases), so there
are now 4 extra sets of tests:
- strings of 1-65 characters, all different
- strings of 1-65 characters, all the same
- strings of 1-65 characters, all the same *except* the last character
- strings of 16 characters long, all the same except one, and that one
is different for every string (i.e. first string differs in first
char, second in second char, etc)
This should excercise both 1 or more iterations of the vectorized loop,
the detection logic inside the loop, and off-by-one cases.
The input is all ascii, so the ::compare() test will run them for both
QChar-QChar comparisson and for QChar-latin1 comparisson.
Change-Id: Ifaa7e019c63b581d4af5aef6dcfb3e7456c7d360
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit b0c1e07d64.
The unit tests it introduced trigger errors with the macOS and
Win32 implementations, which means the there's something seriously
wrong with either the API, our implementation or the tests.
Revert for now until this gets fixed. Blacklisting was also the
wrong tool to use. The tests should have used QEXPECT_FAIL.
Change-Id: Ida20c6bbe0c019835a22464535029585e8e1e367
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There weren't any, at all.
Testing on the CI showed that the implementation is broken on
macOS, and, to a lesser extent, on Windows, so blacklist the
failing tests until the implementation can be fixed. No need
to hold back testing the other implementations.
Task-number: QTBUG-58737
Change-Id: I9ae16ab778dbe2e95a6ca5e0bae00df4bad65cb2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was determined to be flaky on the CI, depite attempts
to stabilize it (b750a3786f).
Task-number: QTBUG-58745
Change-Id: I933199cd537002699906147d172bb797f1dc90c1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58713
Change-Id: Ie6e6a69b8ea625e3a3102c88d52f1f0fbec242aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When a non-QString-backed mode (via the (QChar*, int) ctor) was added
for Qt 4.5, the author forgot to adjust the setCaseSensitivity()
function. It still uses q_pattern instead of (p.uc, p.len) as the
pattern for which to create the skip-table. Since there is no
setPattern() overload for this mode, the correctness of the matcher is
not harmed by this, but its performance degrades to that of a linear
scan: the skip-table, being filled from an empty pattern, will be
all-zeros, sending bm_find() into the 'possible match' case at every
character.
Since matching is still correct, but slow, it's not possible to write
a test for this. I did, however, leave my attempts in the auto-test,
for when we add QStringView overloads of setPattern() which will then
be able to expose the bug.
Change-Id: I7b803e8624b0352a0a974900affbbfc0c260d93b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When a QFile object is reused, the atEnd() method may return incorrect
values. The reason for this is that QFileDevicePrivate::cachedSize is
not cleared. Setting cachedSize = 0 in the close() method fixes this issue.
Task-number: QTBUG-57698
Change-Id: I828a2cf844e98d581098f2c781fa47d2cd3275ce
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At 200 ms, the error on first firing could be 10 ms.
Task-number: QTBUG-58519
Change-Id: Ifaee7464122d402991b6fffd14a02a4ce782f11f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
tst_qsortfilterproxymodel.cpp:3997:14: warning: 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qsortfilterproxymodel.cpp:4004:9: warning: 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:101:11: warning: 'interface_cast' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:115:13: warning: 'textBeforeOffset' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:121:13: warning: 'textAtOffset' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I75ba00a0109ff25a2a22554980b8e541e661f806
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
On macOS, the code that read the plist is using
QByteArray::fromRawCFData. When we return the data directly
we need to detach the QByteArray so that it does not point
CFData's data that will get deallocated just after the call.
Task-number: QTBUG-58531
Change-Id: If829a304b986c99c8fc2aeeb992f2d539a4eef3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
As used in recent qtdeclarative commits, so better make sure it keeps working.
Change-Id: I6d0ceda76201e3e7f75661cb6449e1ff32329126
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There was a test that tested this, but was wrong.
[ChangeLog][QtCore][QVariant] Fixed a bug that caused wrong results for
comparisons of QVariants containing either NaN or infinite numbers.
Task-number: QTBUG-56073
Change-Id: I33dc971f005a4848bb8ffffd1475d29d00dd1b7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This constitutes a fairly complete submission of an entirely new
floating point type which conforms to IEEE 754 as a 16-bit storage
class. Conversion between qfloat16 and float is currently performed
through a sequence of lookup tables. Global-level functions
qRound(), qRound64(), qFuzzyCompare(), qFuzzyIsNull(), and
qIsNull() each with a qfloat16 parameter have been included
for completeness.
[ChangeLog][QtCore] Added new qfloat16 class.
Change-Id: Ia52eb27846965c14f8140c00faf5ba33c9443976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under certain circumstances, VS2015 reported ambiguous options in using
the operator>(Enum,int) operator. This change adds a static_cast<qint64>
to remove any ambiguity. In the process of testing this change, a gap
in the existing logic was identified: the handling (just in the test
code) of large negative enum values. Consequently, and additional
test case was added, and additional if-conditions were added to account
for that case.
Change-Id: Ife2c471ba4caa4b9a0107722042114e58145c4d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first one was already suppressed for GCC, so also do that for clang:
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: warning: format string is not a string literal (potentially insecure)
[-Wformat-security]
a.sprintf( zero );
^~~~
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: note: treat the string as an argument to avoid this
a.sprintf( zero );
^
"%s",
The second one could also occur with other compilers, so fix it in a
generic way.
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:6382:5: warning: ignoring return value of function declared with
warn_unused_result attribute [-Wunused-result]
string.repeated(3);
^~~~~~~~~~~~~~~ ~
2 warnings generated.
Change-Id: Id999179e795580a37b5be673ee54d6fa1a006dd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because on Windows, the .ini files are saved with CRLF, but the files in
the Qt resource are just LF (.gitattributes makes them so).
Task-number: QTBUG-25446
Change-Id: I5eab0d9620bd1ba675b0a87c554f62cef0f98fcc
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- port from inefficient QLists to QVector
- mark types held in Qt containers (incl. QVariant) as Q_MOVABLE/PRIMITIVE_TYPE
- remove pointless user-defined copy special members which prevent the class
from having nothrow move special members
Fixes errors reported by my local tree's static checks.
Change-Id: If3910484cea81a8e2c5ab737908c9443f75782c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There was an off-by-one error in the while loop for aarch64: we start
counting at 0 for the first position, so the last valid input position
is "a+7", not 8.
This wasn't covered by the tests, nor was the SSE2 version, so now there
are also tests for both versions.
Change-Id: I7eb8c5708e6179f45ea56885b0e66e1a37969c1d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not wait up to the timeout ms after already having waited several
times. At the same time upgrade to using the QDeadlineTimer which
is designed for this purpose.
Change-Id: Iaf5e4f4655605d5143ce91040c6eb6706752e504
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the qWait() and introduce a QTRY_COMPARE()
checking for the end value first.
Task-number: QTBUG-58402
Change-Id: I2d3758178de5f67881008f28c406076ad27c4a90
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Use QTRY_COMPARE with a timeout to check for the stopped state
unless BAD_TIMER_RESOLUTION is defined.
This speeds up the test by 1s and prints diagnostic information
should an interval be too short (as seems to be the case on macOS,
currently).
Change-Id: I8f884cd66ad33314124d3130d9f49606e6dfe9f3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
[ChangeLog][QtCore][QFileSelector] Removed the requirement for an unused
default base file in case you want to load only a variant.
When the base file (e.g. /image.jpg) was missing, no selectors were
considered and it was not possible to load variants of this file (e.g.
/+android/image.jpg, /+android/+tablet/image.jpg) without specifying the
directory as well.
As a work around, one previously had to place a default file in
the base location, which is undesirable in some cases because:
1. The extra file consumes unnecessary space.
2. It is impossible to encapsulate platform-specific implementation
details by hiding files in a subdirectory.
Task-number: QTBUG-51230
Change-Id: I4c7f9ec952bff6e5b7738d8cabe3c762c208a38e
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
This is a version of QByteArrayMatcher that calculates the
Boyer-Moore skip table at compile-time instead of at run-time,
making this class more generally applicable than QByteArray-
Matcher itself, at least for statically-known strings.
The compile-time part requires C++14 constexpr support, but
the class should compile and work even in C++98 mode, just
with runtime initialization of the skip-table.
While touching tst_qbytearraymatcher, clean up the static
global QByteArrayMatchers there and add tests with needles
longer than 255 characters for QByteArrayMatcher, too.
[ChangeLog][QtCore] Added QStaticByteArrayMatcher.
Change-Id: I0662f262ab19b79ae4096f3ab384d5b3ada72347
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
So that QFlags can use an (un)signed int matching the
underlying type as identified by the compiler and not by us.
Requires fixing a few warnings about sign conversion due to
QFlags misusages in qtbase that were either plain wrong, or
were relying on the enum being backed by an (un)signed int
when it wasn't.
Keep qtypetraits.h in the source tree in order to prevent
source breaks if some downstream #includes it (note however
that it did not contain any public API).
Change-Id: Ib3a92b98db7031e793a088fb2a3b306eff4d7a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... along with the two matching unused methods of QDateTime's test.
Change-Id: Id11a4b1b0132587f0df451d49c0043e9425d87ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore] QCoreApplication::applicationVersion now defaults to
an appropriate platform-specific value. On Windows, it defaults to the
PRODUCTVERSION parameter of the VERSIONINFO resource for classic desktop
apps, and the version attribute of the application package manifest for
Univeral Windows Platform apps. On Apple Platforms (macOS, iOS, tvOS,
watchOS), it defaults to the CFBundleVersion property of the information
property list (Info.plist) file. On Android, it defaults to the
android:versionName attribute of the AndroidManifest.xml manifest
element. On other platforms, the default remains an empty string.
Task-number: QTBUG-57715
Change-Id: I26f83dd00737e06f4321cf962aa5fab8398104ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids so many complications. The prior code, using
SystemTimeToTzSpecificLocalTime(), lead to unhelpful results when the
QDateTime() implementation used MS-POSIX's defective mktime().
Although SystemTimeToTzSpecificLocalTime() is actually more correct,
we were getting inconsistent results by mixing the two: and
eliminating the use of mktime() turns out to be decidedly tricky. So,
to avoid inconsistency, stick with a UTC time (which is what FILETIME
is defined as). Change QFileInfo's methods to explicitly convert
.toLocalTime() where appropriate and document that these methods do
indeed return local time (as we conjecture has been taken for granted
by callers).
Also added a regression test for the reported case of this going
wrong. A time-stamp from before Russia's (permanent, not DST) change
of TZ could end up inconsistently handled between file-system
meta-data and raw date-time APIs, due to cross-talk between different
MS-Win time APIs.
[ChangeLog][QtCore][QFileInfo] Made sure that all file lifecycle times
are in local time. This was probably true before, but is now explicit.
Task-number: QTBUG-48306
Change-Id: Ic0b99d25c4168f623d31967bc60665c0c4f38a14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The population of data rows was factored into a separate file, qutf8data.cpp, in
commit e20c4730. Merge commit 9bd03235 failed to track a conflicting change into
the new file, and brought the code back into the tst_utf8.cpp, where it has been
duplicating the utf8data data ever since.
Change-Id: I4282685b882448f927289468bd7ab340a21ea0b3
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For language "Traditional Chinese" on iOS with region "US",
the logic was formerly to attempt a match on country/language/script (fail),
followed by country/language (which would result in script defaulting to
"Simplified"). Now, the logic is to try language/script first if script is
specified. Failing that, language/country will be attempted.
Task-number: QTBUG-39639
Change-Id: I75a774b1e66686e95167ff221458a97a7ea2660d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jason Erb <jason.erb@sparist.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The future tests don't need QtConcurrent as QFuture and friends are in
QtCore. The printdevice test doesn't use QtNetwork and the lancelot as
well as the testlib tests don't use QtXml.
Change-Id: I150ac99b36682aa23ad22ba943266eb0f0952838
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This new function does the same as newRow(), except that it has a less confusing
name (in line with _add_Column()), and accepts printf-style arguments to avoid
the need to newRow(qPrintable(QString::asprintf())), a common pattern in client
code. It uses qvsnprintf() under the hoods, avoiding the need for the QString
const char* round-trip.
Port all in-tree users of newRow(qPrintable(QString::asnprintf())) to the new
function.
Change-Id: Icd5de9b7ea4f6759d98080ec30f5aecadb8bec39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A directory is empty when it doesn't contain files or folders.
We can exploit QDirIterator::hasNext() to check whether this is the
case. This is efficient since it doesn't list the whole folder (in the
non-empty case).
Test cases are added for both the empty and non-empty cases.
Change-Id: I0f7e26782c0f97f9c16f928dab6cae37927875d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
An overflow-check needed the datum for the "min" test to be minus the
datum for the "max" test; so explicitly make the former use -max()
instead of synthesising it as min()+1. This simplifies the
explanation of why that's needed, too. Clarify the overflow-check's
comment at the same time.
Change-Id: I41f56764fdf5e8c749bfae7a685e5fb77d37b3a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ISO 14443-3 is for nfc communication and uses 2 different checksums.
The existing one is from ISO 3309 and the other one is from ITU-V.41.
Both are needed to implement an own transport layer defined in ISO
14443-4 to allow nfc commands with a length above 250 byte independent
from the smartphone.
This change will avoid code duplication in QNearFieldTarget.
The private function qNfcChecksum is a copy of qChecksum.
Change-Id: I790ffec8e2ea46f88b2db6f48b64fdcb140e7b70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The separator character is inserted in the resulting array
after every byte and is useful for MAC address output like
01:23:45🆎cd:ef, Hash fingerprints, or low level data
debug output.
[ChangeLog][QtCore][QByteArray] Added toHex() overload to
insert a separator character between the hex bytes.
Change-Id: Ibe436094badc02f3ade7751aa8b5d690599941d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Callers can persist a QModelIndex which was not persisted before in a
slot connected to the signal, and such a persisted index must be updated
in the course of the layoutChange.
Store the indexes to persist after emitting the signal.
Task-number: QTBUG-32981
Change-Id: Ibee4c0d84817d72603a03fe5b22fdeefeac0695e
Reviewed-by: David Faure <david.faure@kdab.com>
Similar to the fix in the parent commit, incorrect updating of the
internal data structures during layout changes can lead to dangling
pointers being dereferenced later. Moves are treated as layoutChanges
by this proxy by forwarding to the appropriate method. However, data is
incorrectly cleared prior to that forwarding. Remove that, and let the
layoutChange handling take appropriate action.
Change-Id: Iee951e37152328a4e6a5fb8e5385c32a2fe4c0bd
Reviewed-by: David Faure <david.faure@kdab.com>
In sourceLayoutAboutToBeChanged the source model update is ignored if
the affected parents are filtered out anyway. The same logic is
attempted in the sourceLayoutChanged slot, but there the early-return
logic is applied too late - the mapping is cleared before performing the
early-return. Because pointers into the mapping are used in the
internalPointer of QModelIndexes in this class, persistent indexes used
later will segfault when attempting to dereference it.
Additionally, if a parent becomes invalid as a result of the
layoutChange, it would be filtered out by the condition in the loop,
resulting in a different result in the comparison of emptiness of the
parents container.
Fix that by persisting the parent's container, and performing the test
for early-return before clearing the mapping.
Task-number: QTBUG-47711
Task-number: QTBUG-32981
Change-Id: If45e8a1c97d39454160f52041bc9ae7e337dce97
Reviewed-by: David Faure <david.faure@kdab.com>
This decouples QProcess and QProcessEnvironment, since the latter may
actually be available on platforms where the former is not.
Change-Id: I3dc799ffdf94486b64143ed01a369897fff44a96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, a zone-based time would claim to be GMT, rather than
identifying its zone properly. Sadly, testing this reveals that
proprietary operating systems don't handle abbreviations ideally.
Task-number: QTBUG-57320
Task-number: QTBUG-57298
Change-Id: I8d8b7fffdbf65ac6178a65f5fc2df4d25afb1a14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the time is specified relative to a zone, the ISO date produced
lacked its offset suffix; all zones were treated as if they were local
time. Handle zone as for an offset from UTC and ensure we do set the
date-time objects's offset from UTC when it's zone-based.
Change-Id: I7c9896bb8ec0a9d89df14a6e94b005174ab9e943
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was so slow it was blacklisted on all platforms for timing out.
This patch lowers the timeout to a 5th and tries removing the blacklist.
Change-Id: Ib28b21de572517c548a14300f26815598efe91e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's a const parameter, so no sense copying it.
Change-Id: I4a673a6a60af9bfe7cb61ce28de2aa295fa1d069
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it const, initialize it instead of assigning, consolidate testing
of it round some #if-ery.
Change-Id: I2efbf58292a0edd2ceb3da8d3cc16246e84a3bac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such mappings are ill-defined in the presence of daylight-savings time
(DST); at its transitions, you need information about whether DST is
active or not to determine the correct UTC value. Existing code did
not have a way to be told that hint, so could not be correct.
Fixing this required changing the (thankfully private) APIs by which
QDateTime accessed QTimeZone's information stipulated by zone time.
In QDateTime, this required propagating the needed hint, when DST
status was known.
QAndroidTimeZonePrivate overloaded QTimeZonePrivate::dataForLocalTime
with an implementation that works whenever !hasTransitions(); the base
implementation handled this case lamely, so I've moved the Android
implementation there, to have only one place for both re-writes.
Amended tst_QDateTime's expected failures; passing a date and time to
the constructor *is* ambiguous when the moment indicated is in a
transition. I have changed which way we resolve that ambiguity.
Added round-trip test of QDateTime's fromMSecs/toMSecs (but as a
QTimeZone test, since that's what's actually getting tested), based on
a test-case from Marko Kangas. Initially failed for various zones,
each at one hour-offset; and, on some platforms, for some zones, at
all offsets. These last revealed that a platform may claim to have
zone information yet, for some zones, lack it (or have very incomplete
information). In each case, despite this, the platform does give
offsetFromUtc(). (The test also found another pre-existing bug on
Linux; fixed in an earlier commit.)
To accommodate these gaps in transition data, the transition-based
code now falls back to the offsetFromUtc()-based code (used when there
are no transitions) if it can't find a previous transition (which, in
any case, it needs to do its job).
Task-number: QTBUG-56460
Task-number: QTBUG-56397
Task-number: QTBUG-52284
Change-Id: I2f7422a9e9d3767940b1901d887c6a2c1f36ac9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a bool *ok out parameter to qt_normalizePathSegments() and return false
when ".." are left over for an absolute path, indicating an attempt to
change above root.
Factor out static helper qt_cleanPath() to be able to pass the return value
to QDir::cd() and return on failure from there.
Amends change 63f634322b, which did
not handle UNC paths.
Task-number: QTBUG-53712
Change-Id: I3e63a5dd0259306a0b99145348d815899582f78e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling QDir::cleanPath() on "//server/path/.." resulted in "/".
Factor out a function to determine the root path part of an absolute
path for later use, and handle some special cases:
- Consider server name of "//server/path/.." as part of the prefix.
- Check on the root path for WinRT.
Task-number: QTBUG-53712
Change-Id: Ibddacf06212b6fc86fa74a5e4078df6cfd5b66f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Namely: decltype(). Ideally we'd want C++17's template constructor
argument deduction, but instead use the C++11 solution: a factory
function. This enables using things such as lambdas in the container
argument.
Change-Id: Idba64d8069d15bbafe54cfdebe24b1fba1eb8d0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Q_UINT64_C appends a literal, which causes warnings:
tst_qtextstream.cpp(2026): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2030): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2031): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2032): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2289): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2309): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2329): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2355): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2381): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2411): warning C4146: unary minus operator applied to unsigned type, result still unsigned
Change-Id: I69ac87c224b75aff059477362d8a317c7e766ec2
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
tst_qtcpsocket.cpp:606:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qtcpsocket.cpp:670:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qfile.cpp(2661): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
tst_qarraydata.cpp(760): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
main.cpp:40:33: warning: ignoring return value of 'char* fgets(char*, int, FILE*)', declared with attribute warn_unused_result [-Wunused-result]
Change-Id: I80ccef29b71af6a2c3d45a79aedaeb37f49bba72
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Compare to QLatin1String and use reinterpret_cast to fix MSVC warning:
tst_qstring.cpp(1271): warning C4312: 'type cast': conversion from 'unsigned int' to 'void *' of greater size
Change-Id: I4f26d72f0fad59e09636fe609a2772309a688e5c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
../tst_qfile.cpp: In member function 'void tst_QFile::handle()':
../tst_qfile.cpp:2661:38: warning: ignoring return value of 'ssize_t read(int, void*, size_t)', declared with attribute warn_unused_result [-Wunused-result]
tst_qstatictext.cpp:862:58: warning: unused parameter 'textItem' [-Wunused-parameter]
../tst_qtcpsocket.cpp: In member function 'void tst_QTcpSocket::abortiveClose()':
../tst_qtcpsocket.cpp:2254:90: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Test.cpp: In member function 'void My4Socket::read()':
Test.cpp:66:20: warning: 'reply' may be used uninitialized in this function [-Wmaybe-uninitialized]
../tst_qlocalsocket.cpp: In lambda function:
../tst_qlocalsocket.cpp:701:51: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
../tst_qtcpserver.cpp: In member function 'void tst_QTcpServer::linkLocal()':
../tst_qtcpserver.cpp:935:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
../tst_qtcpserver.cpp:940:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: Ic315069768bcb63a6b333c28ac65b0b992b0d43f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The prior test deemed there to be narrowing if source and destination
integral-or-enum types didn't have the same signedness; but all values
of an unsigned source type can be represented in a larger signed
destination type, so there is no narrowing in this case.
Updated QObject test-case to match.
Change-Id: I517a5997adcad70e185d7469a8d26788e463cb75
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
allowed code such as
mutex.try_lock_for(10us)
to compile, which is misleading, since it's actually a zero-
timeout try_lock().
Feedback from the std-discussions mailing list is that the
wait_for functions should wait for _at least_ the duration
given, because that is the natural direction of variance
(tasks becoming ready to run might not get a CPU immediately,
causing delays), while an interface that documents to wait
_no more_ than the given duration is promising something it
cannot fulfill.
Fix by converting the given duration to the smallest number
of milliseconds not less than the original duration. If that
is not representable in an int, use INT_MAX, emulating the
effect of a spurious wakeup, which are allowed to happen if
the function returns false in that case.
In the above example, the try_lock_for call is now equivalent
to
mutex.tryLock(1);
The tryLock() docs state that the actual waiting time does
not exceed the given milliseconds, but fixing that is a
separate issue.
Change-Id: Id4cbbea0ecc6fd2f94bb5aef28a1658be3728e52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The logo (microsoft.windows.softwarelogo.showdesktop.exe) is otherwise
not found.
Change-Id: Ic52329462612a027e2928922a1f9a541dcbc67a3
Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The time stamp is added at the end of the node information and
consequently this also bumps the version.
Task-number: QTBUG-57182
Change-Id: Ia10e006f28c0b168b2bcd74ed8b7098f84d10af3
Reviewed-by: hjk <hjk@qt.io>
Chaining hooks together was mentioned by Ossi in the comments of
d953d9a4. This patch justs add a test that verifies that it works, and
also serves as an informal example for developers looking how to do it.
Change-Id: I53a014d5663c289ea0559e0926ed301f4e5110e6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
This test fails on Windows occasionally with values just short of 800, the lowest
observed being 791. It is probably rounding somehow to 10ms segments, so allow
it to be up to 10 ms too fast.
Change-Id: Ie28e9f61588b68a9060a006f78eedc3a26d05155
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Do not consume white-space after a token before the token has been
parsed, otherwise we end up with misleading offsets. This also fixes
a wrong error of illegal number in several cases.
Change-Id: I492ca4de0346a1d0ab73b1c23d7a72dba812664c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add better boundary checks and catch (hopefully all)
cases where invalid binary JSON could cause crashes.
Change-Id: I206510b7c5e3ba953802a5f46645878e65704ecc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Any other use than for enums should use std::is_[un]signed. Make this
explicit by renaming the type traits.
Change-Id: I494158563c95c710e710d0d337f4e547006df171
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the macro is now just a wrapper for std::is_enum,
its use is also deprecated.
[ChangeLog][QtCore][Global] Q_IS_ENUM is deprecated.
Use std::is_enum<>::value instead.
Change-Id: I09b9f4559c02c81f338cace927873318f2acafde
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove most type traits from qtypetraits.h, but keep the custom
implementation of is_signed/is_unsigned. This gets rid of
BSD-3 licensed code from Google in a public header (hugh!).
The custom implementations for is_signed/is_unsigned are kept
because the implementations in gcc's standard headers do not
work as we expect for enums - both is_signed and is_unsigned
always returns false there - see also
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=59027
[ChangeLog][QtCore][General] Qt now relies on type traits from
the C++ standard library.
Change-Id: I3f2188b46949f04ca4482a6ac9afd3482103f0e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds a few missing parts of the conversion from QVariant to QJsonValue
after the introduction of the nullptr QVariant. The conversion the other
way is already implemented.
Change-Id: I8b25dec4b476c4761c5098a60944ff11c36f8bec
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Apparently, the CI can run something over 1000x slower than on my
machine. We're getting over 100 ms delays in operations that shouldn't
have taken more than half a millisecond. The last report was of 136%
over budget, so I multiplied the resolution by 4.
Change-Id: I9093948278414644a416fffd1474406967b2a6ee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The file descriptor has been closed and this test is checking if we get
EBADF.
Change-Id: I33dc971f005a4848bb8ffffd1478eaffd99aa2e9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This will be done by all POSIX APIs for strings coming in that way, but
because other code (like NSWhateverViews) will most likely return
decomposed form, we make sure that those are in composed form too.
Task-number: QTBUG-55896
Change-Id: I065e11cee6b59706d4346ed20d4b59b9b95163b8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
All strings coming out of POSIX API calls are converted to composed form
by QFile::decodeName. Do the same for realpath(3) output. This is
especially important for HFS+, which will store file names in decomposed
form, and APIs will therefore return strings in decomposed form.
Task-number: QTBUG-55896
Change-Id: I5e51f4e5712ff26bf9644cbcf9a9603995748892
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The Qt::ISODate format strips milliseconds, so a new format is introduced
that keeps the milliseconds. A new format was chosen over fixing the
existing format due to the behavioral change of suddenly having ms
as part of Qt::ISODate.
Change-Id: If8b852daed068cce8eee9b61a7cd4576bc763443
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
violate a principal design rule of <chrono>, namely that non-
narrowing conversions are implicit, but narrowing conversions
need duration_cast. By accepting any duration, we allow non-
sensical code such as
QTimer::singleShot(10us, ...)
to compile, which is misleading, since it's actually a zero-
timeout timer.
Overloading a non-template with a template also has adverse
effects: it breaks qOverload().
Fix by replacing the function templates with functions that
just take std::chrono::milliseconds. This way, benign code
such as
QTimer::singleShot(10s, ...)
QTimer::singleShot(10min, ...)
QTimer::singleShot(1h, ...)
work as expected, but attempts to use sub-millisecond
resolution fails to compile / needs an explicit user-
provided duration_cast.
To allow future extension to more precise timers, forcibly
inline the functions, so they don't partake in the ABI of the
class and we can later support sub-millisecond resolution by
simply taking micro- or nano- instead of milliseconds.
Change-Id: I12c9a98bdabefcd8ec18a9eb09f87ad908d889de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Saving strings with embedded zero-bytes (\0) as CFStrings would
sometimes fail, and only write the part of the string leading
up to the first zero-byte, instead of all the way to the final
zero-terminator. This bug was revealed by the code-path that
falls back to storing e.g. QTime as strings, via the helper
method QSettingsPrivate::variantToString().
We now use the same approach as on platforms such as Windows
and WinRT, where the string produced by variantToString() is
checked for null-bytes, and if so, stored using a binary
representation instead of as a string. For our case that
means we fall back to CFData when detecting the null-byte.
To separate strings from regular byte arrays, new logic has
been added to variantToString() that wraps the null-byte
strings in @String(). That way we can implement a fast-path
when converting back from CFData, that doesn't go via the
slow and lossy conversion via UTF8, and the resulting QVariant
will be of type QVariant::ByteArray. The reason for using
UTF-8 as the binary representation of the string is that
in the case of storing a QByteArray("@foo") we need to
still be able to convert it back to the same byte array,
which doesn't work if the on-disk format is UTF-16.
Task-number: QTBUG-56124
Change-Id: Iab2f71cf96cf3225de48dc5e71870d74b6dde1e8
Cherry-picked: 764f5bf48c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The previous sync() of the specific scope and domain may have failed due
to not having the necessary permissions, but the saved value may still be
cached, so we need to check both.
This was observed on macOS Sierra, where a failed sync() will result in
marking the CFPrefsPlistSource as read-only, eg:
2016-10-04 13:14:11.713271 tst_qsettings[88537:767733] [User Defaults] attempt to set
<private> for key in <private> in read-only (due to a previous failed write) preferences
domain CFPrefsPlistSource<0x6180000e1780> (Domain: org.software.KillerAPP,
User: kCFPreferencesAnyUser, ByHost: Yes, Container: (null))
Change-Id: I8976c1c4acfe2cb0d5510298d5c585faca9607f6
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
WinRT is not the only sandboxed platform. Since it doesn't hurt to keep
the test data in a well known location, we enable the code for all
platforms. We also make sure to mkpath the location, since writableLocation
doesn't guarantee that the location exists.
Change-Id: Ie8d90c5fbdf3b7fbf85ba6be25372b0ef7c4da55
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
By using _MIN for signed values, and _MAX for unsigned values, we may
detect conversion issues when serializing QVariants using QSettings.
Change-Id: I3ce58ba4b93f791f75c7ae44d1fd5030f07b2f25
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix is trivial, but the patch adds a new QSettings tests that iterates most
of the QMetaTypes and verifies that storing and retrieving them again gives the
same value. This is a more complete test than the testVariantTypes tests, which
is limited to a subset of the QVariant types. The new tests borrows logic from
the QMetaType test machinery.
QSettings has been Q_ENUM'ified in the process, for improved debug output.
Note that on backends such as the INI backend, the metatype of the QVariant read
from the settings will be a string, so it won't match the input QVariant type,
but the result of converting that to the original value type should still work.
Task-number: QTBUG-56124
Change-Id: Ib03a26abf77c9fb449b94160d28bc4baeb095f25
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Saving strings with embedded zero-bytes (\0) as CFStrings would
sometimes fail, and only write the part of the string leading
up to the first zero-byte, instead of all the way to the final
zero-terminator. This bug was revealed by the code-path that
falls back to storing e.g. QTime as strings, via the helper
method QSettingsPrivate::variantToString().
We now use the same approach as on platforms such as Windows
and WinRT, where the string produced by variantToString() is
checked for null-bytes, and if so, stored using a binary
representation instead of as a string. For our case that
means we fall back to CFData when detecting the null-byte.
To separate strings from regular byte arrays, new logic has
been added to variantToString() that wraps the null-byte
strings in @String(). That way we can implement a fast-path
when converting back from CFData, that doesn't go via the
slow and lossy conversion via UTF8, and the resulting QVariant
will be of type QVariant::ByteArray. The reason for using
UTF-8 as the binary representation of the string is that
in the case of storing a QByteArray("@foo") we need to
still be able to convert it back to the same byte array,
which doesn't work if the on-disk format is UTF-16.
Task-number: QTBUG-56124
Change-Id: Iab2f71cf96cf3225de48dc5e71870d74b6dde1e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A fair amount of tests are skipped if we can't write to the system scope,
eg on iOS. Without this detection they will fail.
Change-Id: I8257f1f24e69dae88925c20d2bff851e81701405
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
It fails on iOS as well, and likely also tvOS and watchOS.
Change-Id: Idfce98a5aeccb5680f6b4c6e66b526dd7922156d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
CFAbsoluteTime is measured in seconds, represented by a double,
so when converting milliseconds to CFAbsoluteTime we may get a
slight error due to missing precision in double to represent
the milliseconds exactly. By rounding to the closest millisecond
when converting back, we avoid truncating and being one ms off.
Change-Id: If1e99f97b000fb8cb893ddfc5d7ba81096c0ea88
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
There's no reason for this to be separated, regardless of the
support status of i386 macOS builds. Additional architectures may
appear in the future (and currently there's actually 3 - i386,
x86_64, and x86_64h for Haswell CPUs). So this feature could be
used to get combined generic x86_64 and Haswell builds. Some
system libraries appear to have an x86_64h slice in Sierra.
[ChangeLog][Build System] Support for universal binaries on macOS
has been re-introduced.
Change-Id: I1c89904addf024431fdb3ad03ea8ab85da7240ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Update fallback mechanism for Q_XDG_PLATFORM based systems to follow the
Xdg specification.
[ChangeLog][QtCore][QSettings] Added proper support for system-wide
configuration file lookup based on Xdg spec (XDG_CONFIG_DIRS) on Unix
based systems
Task-number: QTBUG-34919
Change-Id: Ieddee1c0b3b1506bf19aa865bdab87fc81d58cfd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A check "just in case" -- we don't want leaks nor crashes
due to double deletions, and so on.
Change-Id: I24f1a486f0d438595bbe352ab780b07c5d53acbd
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
Occurrences which should simply be removed entirely (due to always being
true or always being false as a result of the current OS support matrix)
have been left untouched for now.
Change-Id: I86d5a084cb84bc28fefc5191d40924de1439b3de
Reviewed-by: Liang Qi <liang.qi@qt.io>
Costs only ~300B in text size in QtCore, which is roughly compensated by
savings in other QtBase libraries, even without specifically porting
users to QL1S.
Of course, the raison d'être for this overload is avoiding the expensive
QLatin1String -> QString conversion which, for small lists, can take up
to 50% of the total runtime (assuming memory allocations dominate over
scanning and copying the list).
[ChangeLog][QtCore][QStringList] Added join(QLatin1String) overload.
Change-Id: I91d7e1d4e2c76d6dc79f2b750cf8e256dd4e0ab6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Isolates the test from anything that might be going on on the globalInstance().
Enabled by the explicit thread-pool feature on QtConcurrent::run().
Add explicit timed wait (unit tests should contain as little indefinite waits
as possible).
Also avoids the use of QFutureSynchronizer, which makes my static QList
checker go nuts, with no way of fixing it until Qt 6.
Change-Id: I0829992642b2a49bb6a10ddd4b31eb3f88e3adeb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
EcmaScript mandates that number-to-string functions pad the resulting
strings with zeroes, up to the requested precision. QLocale actually
supports this, under the disguise of the "Alternate" flag, used by
QString::asprintf().
We split this flag into the three options it actually represents and
make IncludeTrailingZeroesAfterDot available as a NumberOption. This
allows us to generate numbers in an EcmaScript compliant way.
In addition, a symmetrical option to reject trailing zeroes when
parsing strings to numbers is added.
[ChangeLog][QtCore][QLocale] Additional flags in QLocale::NumberOption
allow generating strings from doubles in accordance to EcmaScript's
Number.toPrecision(n).
Change-Id: If1090d5a0364a29811011a472afc8b75d0af0a8f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found by UBSan:
qstring.h:1160:44: runtime error: null pointer passed as argument 1, which is declared to never be null
qstring.h:1160:44: runtime error: null pointer passed as argument 2, which is declared to never be null
Fix by avoiding the memcmp() calls if there's a chance that they
might be called with nullptr.
While at it, also implement !=, >, <=, >= in terms of ==, <,
and add a test, because this particular UB was not fingered by
any of the QtCore test cases, but by a Qt3D one.
Change-Id: I413792dcc8431ef14f0c79f26e89a3e9fab69465
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This function reallocates a QArrayData block with realloc() but, as
the name says, it's only valid for types that do not increase the
alignment requirements. I don't think it's worth doing this for types
that do increase the alignment requirements, since we don't know the
alignment of the pointer returned by realloc(). If the new pointer
modulo the alignment is different from the old pointer modulo the
alignment, we'd have to memmove data around, which would be quite
inefficient (realloc might have memcpy'ed already and this memmove
would copy data to nearby).
This function is intended to be used especially in QString and
QByteArray, which were already using realloc() on pointers created by
QArrayData::allocate.
Change-Id: I45b61247db2e84797ad794c1049c47a09c1fb29a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It makes very little sense that one needs to have a debug build
of Qt to debug QObject issues in application code. At this date
we don't even offer debug builds for Linux systems, and anyhow
one might want to debug an application running against a
release build of Qt.
[ChangeLog][QtCore][QObject] QObject::dumpObjectInfo and
QObject::dumpObjectTree are now fully functional even in a non-debug
build of Qt.
Change-Id: Ifddd3023ffc82f3dc3928a7a94d4970e2fb1b44a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
According to https://msdn.microsoft.com/en-us/library/5dae5d43.aspx,
strncpy_s' second argument must not be 0:
> If strDest or strSource is NULL, *or numberOfElements is 0*, the
> invalid parameter handler is invoked.
Move the existing check for len > 0 up to protect the strncpy_s
call, too.
Change-Id: I70d339ea60d4b76f3038b2e4e4756f6590a9bd31
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
Just one Q_FOREACH needed porting to C++11 range-for here.
Change-Id: I30ddd2a80cbb3245e23accc7843e67574fb2db17
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- port Q_FOREACH to C++11 range-for
- mark types held in Qt containers as shared
- port inefficient QLists to QVectors
(required adding an artificial default ctor to one of the payload types)
- fix algorithmic mistake:
* don't use a QMap to sort a vector of QXmlStream{Attribute,NotationDeclaration},
constructing a QString key from the QStringRef name(). Use std::sort with a
lambda. Since this code is used in two places, and we don't yet require poly-
morphic lambdas, factor the code into a helper function template that also
takes care of adding the const to the return type so the range-for doesn't
detach the container.
Fixes errors reported by my local tree's static checks.
Change-Id: I3de97d9b03c87455aa6030998e9ca26c6c79a2e3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- port from Q_FOREACH to C++11 range-for
Fixes errors reported by my local tree's static checks.
Change-Id: Ib8522ed424ba227d84f9664c3282f95f6bee547c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This makes it possible for the application to control which language
is used by QMimeType::comment()
[ChangeLog][QtCore][QMimeType] QMimeType::comment() now uses the default locale
rather than system locale, so that applications can control which language
is being used.
Task-number: QTBUG-50776
Change-Id: I82623b7c488035a4164fadaf37ebcc79a9fd6173
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
- add Q_DECLARE_TYPEINFO for types held in Qt containers (incl. QVariant)
- port Q_FOREACH to C++11 range-for
- port uses of inefficient QLists to QVector
Fixes errors pointed out by my tree's static checks.
Change-Id: I7176b4b12ed47ed23166857bd127c459ea2a48d5
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
These tests use helpers, which are not supported on UIKit platforms.
Change-Id: I51447754dba2cd2547be05c3767e4ff3b6b5a671
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
- port Q_FOREACH to C++11 range-for
(incl. one case of iterating over QHash::keys())
- port uses of inefficient QLists to QVector
- add Q_DECLARE_TYPEINFO for types held in Qt containers
Fixes errors pointed out by my tree's static checks.
Change-Id: I30eb432528fa3008240b5c217d5f2f9ddc3679be
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
We require Q_COMPILER_RVALUE_REFS and _VARIADIC_TEMPLATES since Qt 5.7,
so remove the non-variadic version which anyway has zero test coverage.
Also drop #include <utility>, as that is included from qglobal.h already,
and drop QSKIP from test.
Change-Id: I1fc7f7068eac80ad6fd85e1d8f6d33c5c7bb67db
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
